| Age | Commit message (Collapse) | Author |
|---|
|
From looking at the data sheets, it is not obvious that CS# and latch
clock can be treated at the same, but doing so works fine and saves the
hassle of (1) trying to specify a SPI device without CS, and (2) adding
another property to drive the latch clock[1].
[1]: https://lore.kernel.org/lkml/20241213-gpio74-v1-2-fa2c089caf41@posteo.net/
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241224-gpio74-v2-3-bbcf14183191@posteo.net
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
With the recent rework of the PCI power control code, the workaround for
the wlan-enable GPIO - where we don't set a default (low) state in the
power sequencing driver, but instead request the pin as-is - should no
longer be needed but some platforms still fail to probe the WLAN
controller. This is caused by the Qcom PCIe controller and needs a
workaround in the controller driver so add a FIXME to eventually remove
the hack from this driver once this is done.
Link: https://lore.kernel.org/r/20250102121530.26993-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The rcar_pcie_parse_outbound_ranges() uses the devm_request_mem_region()
macro to request a needed resource. A string variable that lives on the
stack is then used to store a dynamically computed resource name, which
is then passed on as one of the macro arguments. This can lead to
undefined behavior.
Depending on the current contents of the memory, the manifestations of
errors may vary. One possible output may be as follows:
$ cat /proc/iomem
30000000-37ffffff :
38000000-3fffffff :
Sometimes, garbage may appear after the colon.
In very rare cases, if no NULL-terminator is found in memory, the system
might crash because the string iterator will overrun which can lead to
access of unmapped memory above the stack.
Thus, fix this by replacing outbound_name with the name of the previously
requested resource. With the changes applied, the output will be as
follows:
$ cat /proc/iomem
30000000-37ffffff : memory2
38000000-3fffffff : memory3
Fixes: 2a6d0d63d999 ("PCI: rcar: Add endpoint mode support")
Link: https://lore.kernel.org/r/tencent_DBDCC19D60F361119E76919ADAB25EC13C06@qq.com
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: King Dix <kingdix10@qq.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Remove hard-coded strings by using the str_enabled_disabled() helper
function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250112100655.55741-2-thorsten.blum@linux.dev
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
The mediatek-gen3 driver can run its probe routine fairly slow on some
hardware, which adds to the total time it takes for the system start up.
Thus, turn on async mode for the probe to avoid blocking the rest of the
system.
Link: https://lore.kernel.org/r/20241220145205.1.Ibf2563896c3b1fc133bb46d3fc96ad0041763922@changeid
Signed-off-by: Douglas Anderson <dianders@chromium.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Airoha EN7581 has a hw bug asserting/releasing PERST# signal causing
occasional PCIe link down issues. In order to overcome the problem,
PERST# signal is not asserted/released during device probe or
suspend/resume phase and the PCIe block is reset using
en7523_reset_assert() and en7581_pci_enable().
Introduce flags field in the mtk_gen3_pcie_pdata struct in order to
specify per-SoC capabilities.
Link: https://lore.kernel.org/r/20250109-pcie-en7581-rst-fix-v4-1-4a45c89fb143@kernel.org
Tested-by: Hui Ma <hui.ma@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Since mtk_pcie_en7581_power_up() runs in non-atomic context, rely on
msleep() routine instead of mdelay().
Link: https://lore.kernel.org/r/20250108-pcie-en7581-fixes-v6-5-21ac939a3b9b@kernel.org
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Airoha EN7581 has a hw bug asserting/releasing PCIE_PE_RSTB signal
causing occasional PCIe link down issues. In order to overcome the
problem, PCIe block is reset using REG_PCI_CONTROL (0x88) and
REG_RESET_CONTROL (0x834) registers available in the clock module
running clk_bulk_prepare_enable() in mtk_pcie_en7581_power_up().
In order to make the code more readable, move the wait for the time
needed to complete the PCIe reset from en7581_pci_enable() to
mtk_pcie_en7581_power_up().
Reduce reset timeout from 250ms to the standard PCIE_T_PVPERL_MS value
(100ms) since it has no impact on the driver behavior.
Link: https://lore.kernel.org/r/20250108-pcie-en7581-fixes-v6-4-21ac939a3b9b@kernel.org
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
|
|
mtk_pcie_en7581_power_up()
Add a comment in mtk_pcie_en7581_power_up() to clarify, unlike the other
MediaTek Gen3 controllers, the Airoha EN7581 requires PHY initialization
and power-on before PHY reset deassert.
Link: https://lore.kernel.org/r/20250108-pcie-en7581-fixes-v6-3-21ac939a3b9b@kernel.org
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
In order to make the code more readable, the reset_control_bulk_assert()
function for PHY reset lines is moved to make it pair with
reset_control_bulk_deassert() in mtk_pcie_power_up() and
mtk_pcie_en7581_power_up(). The same change is done for
reset_control_assert() used to assert MAC reset line.
Introduce PCIE_MTK_RESET_TIME_US macro for the time needed to
complete PCIe reset on MediaTek controller.
Link: https://lore.kernel.org/r/20250108-pcie-en7581-fixes-v6-2-21ac939a3b9b@kernel.org
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
mtk_pcie_en7581_power_up()
Replace clk_bulk_prepare() and clk_bulk_enable() with
clk_bulk_prepare_enable() in mtk_pcie_en7581_power_up() routine.
Link: https://lore.kernel.org/r/20250108-pcie-en7581-fixes-v6-1-21ac939a3b9b@kernel.org
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
With this, processes without CAP_SYS_ADMIN are able to use TIOCLINUX with
subcode TIOCL_SETSEL, in the selection modes TIOCL_SETPOINTER,
TIOCL_SELCLEAR and TIOCL_SELMOUSEREPORT.
TIOCL_SETSEL was previously changed to require CAP_SYS_ADMIN, as this IOCTL
let callers change the selection buffer and could be used to simulate
keypresses. These three TIOCL_SETSEL selection modes, however, are safe to
use, as they do not modify the selection buffer.
This fixes a mouse support regression that affected Emacs (invisible mouse
cursor).
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/ee3ec63269b43b34e1c90dd8c9743bf8@finder.org
Fixes: 8d1b43f6a6df ("tty: Restrict access to TIOCLINUX' copy-and-paste subcommands")
Signed-off-by: Günther Noack <gnoack@google.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250110142122.1013222-1-gnoack@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
lockdep detects the following circular locking dependency:
CPU 0 CPU 1
========================== ============================
cdns_uart_isr() printk()
uart_port_lock(port) console_lock()
cdns_uart_console_write()
if (!port->sysrq)
uart_port_lock(port)
uart_handle_break()
port->sysrq = ...
uart_handle_sysrq_char()
printk()
console_lock()
The fixed commit attempts to avoid this situation by only taking the
port lock in cdns_uart_console_write if port->sysrq unset. However, if
(as shown above) cdns_uart_console_write runs before port->sysrq is set,
then it will try to take the port lock anyway. This may result in a
deadlock.
Fix this by splitting sysrq handling into two parts. We use the prepare
helper under the port lock and defer handling until we release the lock.
Fixes: 74ea66d4ca06 ("tty: xuartps: Improve sysrq handling")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Cc: stable@vger.kernel.org # c980248179d: serial: xilinx_uartps: Use port lock wrappers
Acked-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20250110213822.2107462-1-sean.anderson@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the serial driver fixes in here to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When the buffer allocation for return data in ni_usb_write() fails
we were returning without unlocking the addressed_transfer_lock.
Add the unlock call.
This was detected by smatch:
New smatch warnings:
drivers/staging/gpib/ni_usb/ni_usb_gpib.c:837 ni_usb_write() warn: inconsistent returns '&ni_priv->addressed_transfer_lock'.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202412201550.9NCO57Ye-lkp@intel.com/
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250111161548.27601-1-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When no matching product id was found in the attach function the driver
returned without unlocking the agilent_82357a_hotplug_lock mutex.
Add the unlock call.
This was detected by smatch:
smatch warnings:
drivers/staging/gpib/agilent_82357a/agilent_82357a.c:1381 agilent_82357a_attach() warn: inconsistent returns 'global &agilent_82357a_hotplug_lock'.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202412210143.WJhYzXfD-lkp@intel.com/
Fixes: 4c41fe886a56 ("staging: gpib: Add Agilent/Keysight 82357x USB GPIB driver")
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250111161457.27556-1-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
All interface drivers were using the old style initialization of
this struct
field : value;
This generated the followng sparse warning, for example:
agilent_82357a/agilent_82357a.c:1492:1: warning: obsolete struct initializer, use C99 syntax
Change the initialization to use the C99 syntax
.field = value;
This also resolves the checkpatch constraint of no indentation
These structs were also not declared as static, unnecessarily polluting
the symbol namespace and generating the following sparse warnings,
for example:
agilent_82357a/agilent_82357a.c:1465:18: warning: symbol 'agilent_82357a_gpib_interface' was not declared. Should it be static?
Declare them as static and remove any conflicting extern declarations
in the corresponding include files.
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250111160514.26954-1-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Code cleanup. This code has some debug code which is commented out.
Delete it.
Signed-off-by: Sandeep Salwan <salwansandeep5@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20250110233834.64147-1-salwansandeep5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the gpib changes in here as well to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the debugfs / driver-core fixes in here as well for testing and
to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
SMB1 shares the mount and remount code paths with SMB2/3 and already
supports password rotation in some scenarios. This patch extends the
password rotation support to SMB1 reconnects as well.
Cc: stable@vger.kernel.org
Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Use the correct kernel-doc format for function parameters (':'
instead of '-') to eliminate kernel-doc warnings.
Add some "Returns:" notations to functions.
memstick.c:206: warning: Function parameter or struct member 'host' not described in 'memstick_detect_change'
memstick.c:222: warning: Function parameter or struct member 'host' not described in 'memstick_next_req'
memstick.c:222: warning: Function parameter or struct member 'mrq' not described in 'memstick_next_req'
memstick.c:248: warning: Function parameter or struct member 'host' not described in 'memstick_new_req'
memstick.c:265: warning: Function parameter or struct member 'mrq' not described in 'memstick_init_req_sg'
memstick.c:265: warning: Function parameter or struct member 'tpc' not described in 'memstick_init_req_sg'
memstick.c:265: warning: Function parameter or struct member 'sg' not described in 'memstick_init_req_sg'
memstick.c:295: warning: Function parameter or struct member 'mrq' not described in 'memstick_init_req'
memstick.c:295: warning: Function parameter or struct member 'tpc' not described in 'memstick_init_req'
memstick.c:295: warning: Function parameter or struct member 'buf' not described in 'memstick_init_req'
memstick.c:295: warning: Function parameter or struct member 'length' not described in 'memstick_init_req'
memstick.c:366: warning: Function parameter or struct member 'card' not described in 'memstick_set_rw_addr'
memstick.c:513: warning: Function parameter or struct member 'host' not described in 'memstick_add_host'
memstick.c:549: warning: Function parameter or struct member 'host' not described in 'memstick_remove_host'
memstick.c:571: warning: Function parameter or struct member 'host' not described in 'memstick_free_host'
memstick.c:582: warning: Function parameter or struct member 'host' not described in 'memstick_suspend_host'
memstick.c:594: warning: Function parameter or struct member 'host' not described in 'memstick_resume_host'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-mmc@vger.kernel.org
Link: https://lore.kernel.org/r/20250111063230.910945-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Correct the function parameters based on a previous code patch to
eliminate kernel-doc warnings.
drivers/hwtracing/intel_th/core.c:866: warning: Function parameter or struct member 'drvdata' not described in 'intel_th_alloc'
drivers/hwtracing/intel_th/core.c:866: warning: Function parameter or struct member 'ndevres' not described in 'intel_th_alloc'
drivers/hwtracing/intel_th/core.c:866: warning: Excess function parameter 'irq' description in 'intel_th_alloc'
Fixes: 62a593022c32 ("intel_th: Communicate IRQ via resource")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20250111062851.910530-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When a transaction fails, log the 'tr->code' to help indentify the
problematic userspace call path. This additional information will
simplify debugging efforts.
Cc: Steven Moreland <smoreland@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250110175051.2656975-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the IIO fixes in here as well, and it resolves a merge conflict
in:
drivers/iio/adc/ti-ads1119.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Static devm_usb_phy_match() is only called by API devm_usb_put_phy(), and
the API has no caller now.
Remove the API and the static function.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250112-remove_api-v1-1-49cc8f792ac9@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As PD2.0 spec ("8.3.3.2.3 PE_SRC_Send_Capabilities state"), after the
Source receives the GoodCRC Message from the Sink in response to the
Source_Capabilities message, it should start the SenderResponseTimer,
after the timer times out, the state machine transitions to the
HARD_RESET state.
Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)")
Cc: stable@vger.kernel.org
Signed-off-by: Jos Wang <joswang@lenovo.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20250105135245.7493-1-joswang1221@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB fixes in here as well for testing.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Delay accounting can now calculate the average delay of processes, detect
the overall system load, and also record the 'delay max' to identify
potential abnormal delays. However, 'delay min' can help us identify
another useful delay peak. By comparing the difference between 'delay
max' and 'delay min', we can understand the optimization space for
latency, providing a reference for the optimization of latency
performance.
Use case
=========
bash-4.4# ./getdelays -d -t 242
print delayacct stats ON
TGID 242
CPU count real total virtual total delay total delay average delay max delay min
39 156000000 156576579 2111069 0.054ms 0.212296ms 0.031307ms
IO count delay total delay average delay max delay min
0 0 0.000ms 0.000000ms 0.000000ms
SWAP count delay total delay average delay max delay min
0 0 0.000ms 0.000000ms 0.000000ms
RECLAIM count delay total delay average delay max delay min
0 0 0.000ms 0.000000ms 0.000000ms
THRASHING count delay total delay average delay max delay min
0 0 0.000ms 0.000000ms 0.000000ms
COMPACT count delay total delay average delay max delay min
0 0 0.000ms 0.000000ms 0.000000ms
WPCOPY count delay total delay average delay max delay min
156 11215873 0.072ms 0.207403ms 0.033913ms
IRQ count delay total delay average delay max delay min
0 0 0.000ms 0.000000ms 0.000000ms
Link: https://lkml.kernel.org/r/20241220173105906EOdsPhzjMLYNJJBqgz1ga@zte.com.cn
Co-developed-by: Wang Yong <wang.yong12@zte.com.cn>
Signed-off-by: Wang Yong <wang.yong12@zte.com.cn>
Co-developed-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn>
Co-developed-by: Kun Jiang <jiang.kun2@zte.com.cn>
Signed-off-by: Kun Jiang <jiang.kun2@zte.com.cn>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Fan Yu <fan.yu9@zte.com.cn>
Cc: Peilin He <he.peilin@zte.com.cn>
Cc: tuqiang <tu.qiang35@zte.com.cn>
Cc: ye xingchen <ye.xingchen@zte.com.cn>
Cc: Yunkai Zhang <zhang.yunkai@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since task->comm is guaranteed to be NUL-terminated, we can print it
directly without the need to copy it into a separate buffer. This
simplifies the code and avoids unnecessary operations.
Link: https://lkml.kernel.org/r/20241219023452.69907-6-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org> (For tty)
Reviewed-by: Lyude Paul <lyude@redhat.com> (For nouveau)
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: "André Almeida" <andrealmeid@igalia.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since task->comm is guaranteed to be NUL-terminated, we can print it
directly without the need to copy it into a separate buffer. This
simplifies the code and avoids unnecessary operations.
Link: https://lkml.kernel.org/r/20241219023452.69907-5-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Acked-by: Kees Cook <kees@kernel.org>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: "André Almeida" <andrealmeid@igalia.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Cc: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since task->comm is guaranteed to be NUL-terminated, we can print it
directly without the need to copy it into a separate buffer. This
simplifies the code and avoids unnecessary operations.
Link: https://lkml.kernel.org/r/20241219023452.69907-4-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "André Almeida" <andrealmeid@igalia.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Cc: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since task->comm is guaranteed to be NUL-terminated, we can print it
directly without the need to copy it into a separate buffer. This
simplifies the code and avoids unnecessary operations.
Link: https://lkml.kernel.org/r/20241219023452.69907-3-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "André Almeida" <andrealmeid@igalia.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: James Morris <jmorris@namei.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Remove get_task_comm() and print task comm directly", v2.
Since task->comm is guaranteed to be NUL-terminated, we can print it
directly without the need to copy it into a separate buffer. This
simplifies the code and avoids unnecessary operations.
This patch (of 5):
Since task->comm is guaranteed to be NUL-terminated, we can print it
directly without the need to copy it into a separate buffer. This
simplifies the code and avoids unnecessary operations.
Link: https://lkml.kernel.org/r/20241219023452.69907-1-laoar.shao@gmail.com
Link: https://lkml.kernel.org/r/20241219023452.69907-2-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "André Almeida" <andrealmeid@igalia.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Cc: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix presumed copy-paste typo of kasan_poison_new_object documentation
referring to kasan_unpoison_new_object.
No functional changes.
Link: https://lkml.kernel.org/r/20241220181205.9663-1-dominik.karol.piatkowski@protonmail.com
Fixes: 1ce9a0523938 ("kasan: rename and document kasan_(un)poison_object_data")
ta")
Signed-off-by: Dominik Karol Piątkowski <dominik.karol.piatkowski@protonmail.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This is a follow up from a discussion in Xen:
The if-statement tests that `res` is non-zero; meaning the case zero is
never reached.
Link: https://lore.kernel.org/all/7587b503-b2ca-4476-8dc9-e9683d4ca5f0@suse.com/
Link: https://lkml.kernel.org/r/20241219092615.644642-2-ariel.otilibili-anieli@eurecom.fr
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Ariel Otilibili <ariel.otilibili-anieli@eurecom.fr>
Suggested-by: Jan Beulich <jbeulich@suse.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Anthony PERARD <anthony.perard@vates.tech>
Cc: Michal Orzel <michal.orzel@amd.com>
Cc: Julien Grall <julien@xen.org>
Cc: Roger Pau Monné <roger.pau@citrix.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This won't be removed in 2021, no matter how hard we try.
Link: https://lkml.kernel.org/r/20241218123638.34907-1-martink@posteo.de
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Joel Granados <joel.granados@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Nothing actually checks page->index, so just remove it.
Link: https://lkml.kernel.org/r/20241216161253.37687-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove assumptions that a folio is PAGE_SIZE.
Link: https://lkml.kernel.org/r/20241205171653.3179945-24-willy@infradead.org
Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove assumptions that a folio is one page in size.
Link: https://lkml.kernel.org/r/20241205171653.3179945-23-willy@infradead.org
Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This function no longer exists.
Link: https://lkml.kernel.org/r/20241205171653.3179945-22-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Mark Tinguely <mark.tinguely@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use folio_end_read() instead of SetPageUptodate() and unlock_page(). Use
memcpy_to_folio() instead of open-coding a kmap_atomic() sequence.
Link: https://lkml.kernel.org/r/20241205171653.3179945-21-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Mark Tinguely <mark.tinguely@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All callers now have a folio, so pass it in. We can use folio_fill_tail()
instead of open-coding it. Saves a call to compound_head().
Link: https://lkml.kernel.org/r/20241205171653.3179945-20-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Mark Tinguely <mark.tinguely@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All callers now have a folio, so skip the folio->page->folio conversion.
Link: https://lkml.kernel.org/r/20241205171653.3179945-19-willy@infradead.org
Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Retrieve folios from the page cache, not pages, and use a folio throughout
this function. Removes seven calls to compound_head().
Link: https://lkml.kernel.org/r/20241205171653.3179945-18-willy@infradead.org
Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The ocfs2_zero_cluster_folios() / ocfs2_grab_folios() /
ocfs2_grab_eof_folios() family of functions pass around an array of pages.
Convert them to pass around an array of folios. This removes the last
caller of ocfs2_unlock_and_free_pages(), so delete it.
Link: https://lkml.kernel.org/r/20241205171653.3179945-17-willy@infradead.org
Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pass in and use the folio instead of its page.
Link: https://lkml.kernel.org/r/20241205171653.3179945-16-willy@infradead.org
Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All callers now have a folio, so pass it in instead of converting
folio->page->folio.
Link: https://lkml.kernel.org/r/20241205171653.3179945-15-willy@infradead.org
Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Convert the incoming page to a folio and use it throughout the function.
Removes a couple of calls to compound_head().
Link: https://lkml.kernel.org/r/20241205171653.3179945-14-willy@infradead.org
Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update to the new APIs. Removes a few page->folio conversions.
Link: https://lkml.kernel.org/r/20241205171653.3179945-13-willy@infradead.org
Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
