summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-04-14regulator: bd718x7, bd71828: Use ramp-delay helperMatti Vaittinen
Use generic regamp ramp-delay helper function instead of implementing own. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14regulator: rohm-regulator: Support SNVS HW state.Matti Vaittinen
The ROHM BD71815 supports setting voltage levels/regulator status for HW-states "RUN", "SUSPEND", "LPSR" and "SNVS". Add DT parsing helper also for SNVS state. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14regulator: rohm-regulator: linear voltage supportMatti Vaittinen
The helper for obtaining HW-state based DVS voltage levels currently only works for regulators using linear-ranges. Extend support to regulators with simple linear mappings and add also proper error path if pickable-ranges regulators call this. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14gpio: Support ROHM BD71815 GPOsMatti Vaittinen
Support GPO(s) found from ROHM BD71815 power management IC. The IC has two GPO pins but only one is properly documented in the data-sheet. The driver exposes by default only the documented GPO. The second GPO is connected to E5 pin and is marked as GND in the data-sheet. Control for this undocumented pin can be enabled using a special DT property. This driver is derived from work by Peter Yang <yanglsh@embest-tech.com> although not so much of the original is left. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: Support for ROHM BD71815 PMIC coreMatti Vaittinen
Add core support for ROHM BD71815 Power Management IC. The IC integrates regulators, a battery charger with a coulomb counter, a real-time clock (RTC), clock gate and general-purpose outputs (GPO). Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: Sort ROHM chip ID list for better readabilityMatti Vaittinen
Sort the ID list so it is easier to see which ICs are present. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Suggested-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: Add ROHM BD71815 IDMatti Vaittinen
Add chip ID for ROHM BD71815 and PMIC so that drivers can identify this IC. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14dt_bindings: mfd: Add ROHM BD71815 PMICMatti Vaittinen
Document DT bindings for ROHM BD71815. BD71815 is a single-chip power management IC mainly for battery-powered portable devices. The IC integrates 5 bucks, 7 LDOs, a boost driver for LED, a battery charger with a Coulomb counter, a real-time clock, a 32kHz clock and two general-purpose outputs although only one is documented by the data-sheet. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14dt_bindings: regulator: Add ROHM BD71815 PMIC regulatorsMatti Vaittinen
Add binding documentation for regulators on ROHM BD71815 PMIC. 5 bucks, 7 LDOs and a boost for LED. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14dt_bindings: bd71828: Add clock output modeMatti Vaittinen
The BD71828 allows configuring the clk32kout pin mode to CMOS or open-drain. Add device-tree property for specifying the preferred mode. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: bd718x7: simplify by cleaning unnecessary device dataMatti Vaittinen
Most ROHM PMIC sub-devices only use the regmap pointer from parent device. They can obtain this by dev_get_regamap so in most cases the MFD device does not need to allocate and populate the driver data. Simplify drivers by removing this. The BD70528 still needs the access to watchdog mutex so keep rohm_regmap_dev in use on BD70528 RTC and WDG drivers for now. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14rtc: bd70528: Do not require parent dataMatti Vaittinen
The ROHM BD71828 and BD71815 RTC drivers only need the regmap pointer from parent. Regmap can be obtained via dev_get_regmap() so do not require parent to populate driver data for that. BD70528 on the other hand requires parent data to access the watchdog so leave the parent data for BD70528 here for now. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14staging: rtl8723bs: fix indentation issue introduced by long line splitFabio Aiuto
fix indentation of last line in if condition. Fixes: af6afdb63f17 (staging: rtl8723bs: split long lines) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com> Link: https://lore.kernel.org/r/20210414081739.2990-1-fabioaiuto83@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14staging: rtl8192e: removed multiple blank linesMitali Borkar
Removed multiple blank lines to make code better and neater. Reported by checkpatch. Signed-off-by: Mitali Borkar <mitaliborkar810@gmail.com> Link: https://lore.kernel.org/r/2bfe551f152a611cc49a71a4984f41ef7ee69df5.1618380932.git.mitaliborkar810@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14staging: rtl8192e: remove unnecessary blank line after close braceMitali Borkar
Removed an extra blank line after close brace '{' as it was not necessary. Reported by checkpatch Signed-off-by: Mitali Borkar <mitaliborkar810@gmail.com> Link: https://lore.kernel.org/r/40f72a84750f402c342b4685e0a2f15d27875c9a.1618380932.git.mitaliborkar810@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14staging: rtl8192e: remove unnecessary blank line before braceMitali Borkar
Removed an extra blank line before close brace as it was not necessary. Reported by checkpatch. Signed-off-by: Mitali Borkar <mitaliborkar810@gmail.com> Link: https://lore.kernel.org/r/cad6a7885f30dcfabaf1ccab1fd0644416fea194.1618380932.git.mitaliborkar810@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14staging: rtl8192e: add spaces around binary operatorsMitali Borkar
Added spaces around binary operators like '+', '*', '|', '-', '&', to improve readability and to meet linux kernel coding style. Signed-off-by: Mitali Borkar <mitaliborkar810@gmail.com> Link: https://lore.kernel.org/r/28cbc4825fdfacf5d5ea8bb688a8bd6a1c65f059.1618380932.git.mitaliborkar810@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14staging: rtl8723bs: hal: Remove four set but not used variablesFabio M. De Francesco
Removed four variables that were set but not used. Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Link: https://lore.kernel.org/r/20210414061346.11423-1-fmdefrancesco@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14staging: rtl8723bs: remove two unused functionsFabio Aiuto
remove dump_drv_version() and dump_log_level() function definitions and prototypes. Those functions are unused, and add unnecessary wrap level to log calls. They wrap DBG_871X_SEL_NL which will be replaced by netdev_dbg() with coccinelle script application. Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com> Link: https://lore.kernel.org/r/2e8dd88c053735daed95701140b2f03b4cfe2a2e.1618325614.git.fabioaiuto83@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14staging: rtl8723bs: remove unnecessary dump_drv_version() usageFabio Aiuto
remove unnecessary dump_drv_version() usage. This prepares dump_drv_version() for removal, before coccinelle script application. Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com> Link: https://lore.kernel.org/r/9ce6559cac69eaebfdb07206921d14e99d2b1967.1618325614.git.fabioaiuto83@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14staging: rtl8723bs: replace dump_drv_version() usage with netdev_dbg()Fabio Aiuto
replace dump_drv_version() usage with netdev_dbg(). There's no need to further wrap a netdev_dbg() call for such a low number of occurrences. The string printed is the same contained in DBG_871X_SEL_NL macro called inside dump_drv_version(). This is just preparation before bulk DBG_871X_SEL_NL macro replacement by coccinelle, as the semantic patch that will be used just replaces, doesn't remove. Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com> Link: https://lore.kernel.org/r/a4df375dba6c004a22cf197ff8d498d0e4f3b52e.1618325614.git.fabioaiuto83@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14staging: rtl8723bs: core: Remove unused but set variableFabio M. De Francesco
Removed "ledBlink_param" because it was set to the value of "pbuf" but was never reused. This set was made by direct assignment (no helper had been called), therefore it had no side effect to the location pointed by "pbuf". Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Link: https://lore.kernel.org/r/20210413150517.12533-1-fmdefrancesco@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14staging: rtl8188eu: Move channel_table away from rtw_mlme_ext.hFabio M. De Francesco
Moved "static const struct channel_table[]" from include/rtw_mlme_ext.h to core/rtw_ioctl_set.c because the latter is the only file that uses that array of struct(s) in the whole driver. "make rtl8188eu/ W=1" output several warnings about "'channel_table' defined but not used [-Wunused-const-variable=]". Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Link: https://lore.kernel.org/r/20210413102033.24781-1-fmdefrancesco@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14staging: comedi: adv_pci_dio: remove whitespaceMikko Talikka
Fixed checkpatch.pl warning: CHECK: Blank lines aren't necessary before a close brace '}' + + } Signed-off-by: Mikko Talikka <mikko.talikka@live.com> Link: https://lore.kernel.org/r/AM0PR01MB42597C4CAA1B9E51D4AE3D5E974F9@AM0PR01MB4259.eurprd01.prod.exchangelabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14Merge tag 'intel-pinctrl-v5.12-4' of ↵Linus Walleij
gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into fixes intel-pinctrl for v5.12-4 * Fix pin numbering per community in Intel Lewisburg driver The following is an automated git shortlog grouped by driver: lewisburg: - Update number of pins in community
2021-04-14x86/pat: Do not compile stubbed functions when X86_PAT is offJan Kiszka
Those are already provided by linux/io.h as stubs. The conflict remains invisible until someone would pull linux/io.h into memtype.c. This fixes a build error when this file is used outside of the kernel tree. [ bp: Massage commit message. ] Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/a9351615-7a0d-9d47-af65-d9e2fffe8192@siemens.com
2021-04-14x86/setup: Move trim_snb_memory() later in setup_arch() to fix boot hangsMike Rapoport
Commit a799c2bd29d1 ("x86/setup: Consolidate early memory reservations") moved reservation of the memory inaccessible by Sandy Bride integrated graphics very early, and, as a result, on systems with such devices the first 1M was reserved by trim_snb_memory() which prevented the allocation of the real mode trampoline and made the boot hang very early. Since the purpose of trim_snb_memory() is to prevent problematic pages ever reaching the graphics device, it is safe to reserve these pages after memblock allocations are possible. Move trim_snb_memory() later in boot so that it will be called after reserve_real_mode() and make comments describing trim_snb_memory() operation more elaborate. [ bp: Massage a bit. ] Fixes: a799c2bd29d1 ("x86/setup: Consolidate early memory reservations") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Hugh Dickins <hughd@google.com> Link: https://lkml.kernel.org/r/f67d3e03-af90-f790-baf4-8d412fe055af@infradead.org
2021-04-13ARM: dts: qcom: sdx55: add IPA informationAlex Elder
Add IPA-related nodes and definitions to "sdx55.dtsi". The SMP2P nodes (ipa_smp2p_out and ipa_smp2p_in) are already present. Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20210409155251.955632-1-elder@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13ARM: configs: qcom_defconfig: Reduce CMA size to 64MBManivannan Sadhasivam
Not all platforms are able to allocate CMA size of 256MB. One such platform is SDX55. Hence, use the standard 64MB size for CMA. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170930.91834-8-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13ARM: configs: qcom_defconfig: Enable GLINK SMEM driverManivannan Sadhasivam
Enable the Qualcomm GLINK SMEM driver to support GLINK protocol over shared memory. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170930.91834-7-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13ARM: configs: qcom_defconfig: Enable SDX55 interconnect driverManivannan Sadhasivam
Enable interconnect driver for SDX55 platform to manage the interconnect providers. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170930.91834-6-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13ARM: configs: qcom_defconfig: Enable Q6V5_PAS remoteproc driverManivannan Sadhasivam
Enable the Qualcomm Q6V5_PAS (Peripheral Authentication Service) remoteproc driver to manage the modem co-processor in SDX55 platform. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170930.91834-5-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13ARM: configs: qcom_defconfig: Enable CPUFreq supportManivannan Sadhasivam
Enable CPUFreq and CPUFreq DT drivers to carry out CPU Frequency scaling duties on platforms like SDX55. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170930.91834-4-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13ARM: configs: qcom_defconfig: Enable SDX55 A7 PLL and APCS clock driverManivannan Sadhasivam
Enable A7 PLL driver and APCS clock driver on SDX55 platform. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170930.91834-3-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13ARM: configs: qcom_defconfig: Enable APCS IPC mailbox driverManivannan Sadhasivam
Enable Qualcomm APCS IPC mailbox driver for IPC communication between application processor and other masters in platforms like SDX55. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170930.91834-2-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13ARM: dts: qcom: sdx55: Add basic devicetree support for Thundercomm T55Manivannan Sadhasivam
Thundercomm T55 is the development platform based on the Qualcomm SDX55 chipset. This basic support includes support for debug serial, NAND flash, BAM DMA, USB and regulators support. https://www.thundercomm.com/app_en/product/1593506006365532 Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-14-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13dt-bindings: arm: qcom: Add binding for Thundercomm T55 kitManivannan Sadhasivam
Add devicetree binding for Thundercomm T55 Dev kit based on SDX55. Acked-by: Rob Herring <robh@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-13-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13ARM: dts: qcom: sdx55: Add basic devicetree support for Telit FN980 TLBManivannan Sadhasivam
Telit FN980 TLB is the development platform based on the Qualcomm SDX55 chipset. This basic support includes support for debug serial, NAND flash, BAM DMA, USB and regulators support. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-12-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13dt-bindings: arm: qcom: Add binding for Telit FN980 TLB boardManivannan Sadhasivam
Add devicetree binding for Telit FN980 TLB board based on SDX55. Acked-by: Rob Herring <robh@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-11-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13ARM: dts: qcom: sdx55: Add Modem remoteproc nodeManivannan Sadhasivam
Add modem support to SDX55 using the PAS remoteproc driver. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-16-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13ARM: dts: qcom: Fix node name for NAND controller nodeManivannan Sadhasivam
Use the common "nand-controller" node name for NAND controller node to fix the `make dtbs_check` validation for Qcom platforms. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-10-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13ARM: dts: qcom: sdx55: Add interconnect nodesManivannan Sadhasivam
Add interconnect nodes for the providers in SDX55 platform. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-9-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13ARM: dts: qcom: sdx55: Add SCM nodeManivannan Sadhasivam
Add SCM node to enable SCM functionality on SDX55 platform. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-8-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13dt-bindings: firmware: scm: Add compatible for SDX55Manivannan Sadhasivam
Add devicetree compatible for SCM present in SDX55 platform. Acked-by: Rob Herring <robh@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-7-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13ARM: dts: qcom: sdx55: Add IMEM and PIL info regionManivannan Sadhasivam
Add a simple-mfd representing IMEM on SDX55 and define the PIL relocation info region, so that post mortem tools will be able to locate the loaded remoteproc. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-6-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13ARM: dts: qcom: sdx55: Add modem SMP2P nodeManivannan Sadhasivam
Add SMP2P nodes for the SDX55 platform to communicate with the modem. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-5-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13ARM: dts: qcom: sdx55: Add CPUFreq supportManivannan Sadhasivam
Add CPUFreq support to SDX55 platform using the cpufreq-dt driver. There is no dedicated hardware block available on this platform to carry on the CPUFreq duties. Hence, it is accomplished using the CPU clock and regulators tied together by the operating points table. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-4-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13ARM: dts: qcom: sdx55: Add support for APCS blockManivannan Sadhasivam
The APCS block on SDX55 acts as a mailbox controller and also provides clock output for the Cortex A7 CPU. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-3-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13ARM: dts: qcom: sdx55: Add support for A7 PLL clockManivannan Sadhasivam
On SDX55 there is a separate A7 PLL which is used to provide high frequency clock to the Cortex A7 CPU via a MUX. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-2-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13Merge tag 'trace-v5.12-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Fix a memory link in dyn_event_release(). An error path exited the function before freeing the allocated 'argv' variable" * tag 'trace-v5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/dynevent: Fix a memory leak in an error handling path
generated by cgit (git 2.34.1) at 2025-09-18 23:30:50 +0000