summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-04-09drm/amdgpu: add a dev_pm_ops prepare callback (v2)Alex Deucher
as per: https://www.kernel.org/doc/html/latest/driver-api/pm/devices.html The prepare callback is required to support the DPM_FLAG_SMART_SUSPEND driver flag. This allows runtime pm to auto complete when the system goes into suspend avoiding a wake up on suspend and on resume. Apply this for hybrid gfx and BOCO systems where d3cold is provided by the ACPI platform. v2: check if device is runtime suspended in prepare. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amdgpu: Add additional Sienna Cichlid PCI IDAlex Deucher
Add new DID. Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amdgpu/display/dm: add missing parameter documentationAlex Deucher
Added a new parameter and forgot to update the documentation. Fixes: b6f91fc183f7 ("drm/amdgpu/display: buffer INTERRUPT_LOW_IRQ_CONTEXT interrupt work") Reviewed-by: Xiaogang Chen <xiaogang.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Xiaogang Chen <xiaogang.chen@amd.com>
2021-04-09drm/amdgpu: wrap kiq ring ops with kiq spinlockNirmoy Das
KIQ ring is being operated by kfd as well as amdgpu. KFD is using kiq lock, we should the same from amdgpu side as well. Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09Revert "drm/amdgpu: disable gpu reset on Vangogh for now"Xiaojian Du
This reverts commit 33cf440d594bfbf81fc20604957bc64f02d0b560. And it will enable mode-2 gpu reset for vangogh, it asks PSP firmware version is 00.1A.00.0F or newer. Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amdgpu: add codes to capture invalid hardware access when recoveryDennis Li
When recovery thread has begun GPU reset, there should be not other threads to access hardware, otherwise system randomly hang. v2 (chk): rewritten from scratch, use trylock and lockdep instead of hand wiring the logic. v3: add in_irq check v4: change to check in_task Signed-off-by: Dennis Li <Dennis.Li@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09Merge tag 'devicetree-fixes-for-5.12-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Fix fw_devlink failure with ".*,nr-gpios" properties - Doc link reference fixes from Mauro - Fixes for unaligned FDT handling found on OpenRisc. First, avoid crash with better error handling when unflattening an unaligned FDT. Second, fix memory allocations for FDTs to ensure alignment. * tag 'devicetree-fixes-for-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: property: fw_devlink: do not link ".*,nr-gpios" dt-bindings:iio:adc: update motorola,cpcap-adc.yaml reference dt-bindings: fix references for iio-bindings.txt dt-bindings: don't use ../dir for doc references of: unittest: overlay: ensure proper alignment of copied FDT of: properly check for error returned by fdt_get_name()
2021-04-09Merge tag 'drm-fixes-2021-04-10' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Was relatively quiet this week, but still a few pulls came in, pretty much small fixes across the board, a couple of regression fixes in the amdgpu/radeon code, msm has a few minor fixes across the board, a panel regression fix also. amdgpu: - DCN3 fix - Fix CAC setting regression for TOPAZ - Fix ttm regression radeon: - Fix ttm regression msm: - a5xx/a6xx timestamp fix - microcode version check - fail path fix - block programming fix - error removal fix i915: - Fix invalid access to ACPI _DSM objects xen: - Fix use-after-free in xen - minor duplicate defintion cleanup vc4: - Reduce fifo threshold on hvs4 to fix a fifo full error - minor redunantant assignment cleanup panel: - Disable TE support for Droid4 and N950" * tag 'drm-fixes-2021-04-10' of git://anongit.freedesktop.org/drm/drm: drm/vc4: crtc: Reduce PV fifo threshold on hvs4 drm/vc4: plane: Remove redundant assignment drm/amdgpu/smu7: fix CAC setting on TOPAZ drm/radeon: Fix size overflow drm/amdgpu: Fix size overflow drm/i915: Fix invalid access to ACPI _DSM objects drm/amd/display: Add missing mask for DCN3 drm/panel: panel-dsi-cm: disable TE for now drm/msm/disp/dpu1: program 3d_merge only if block is attached drm/msm: a6xx: fix version check for the A650 SQE microcode drm/msm: Fix a5xx/a6xx timestamps drm/msm: Fix removal of valid error case when checking speed_bin drm/msm: Set drvdata to NULL when msm_drm_init() fails drivers: gpu: drm: xen_drm_front_drm_info is declared twice gpu/xen: Fix a use after free in xen_drm_drv_init
2021-04-09net: fix hangup on napi_disable for threaded napiPaolo Abeni
napi_disable() is subject to an hangup, when the threaded mode is enabled and the napi is under heavy traffic. If the relevant napi has been scheduled and the napi_disable() kicks in before the next napi_threaded_wait() completes - so that the latter quits due to the napi_disable_pending() condition, the existing code leaves the NAPI_STATE_SCHED bit set and the napi_disable() loop waiting for such bit will hang. This patch addresses the issue by dropping the NAPI_STATE_DISABLE bit test in napi_thread_wait(). The later napi_threaded_poll() iteration will take care of clearing the NAPI_STATE_SCHED. This also addresses a related problem reported by Jakub: before this patch a napi_disable()/napi_enable() pair killed the napi thread, effectively disabling the threaded mode. On the patched kernel napi_disable() simply stops scheduling the relevant thread. v1 -> v2: - let the main napi_thread_poll() loop clear the SCHED bit Reported-by: Jakub Kicinski <kuba@kernel.org> Fixes: 29863d41bb6e ("net: implement threaded-able napi poll loop support") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/883923fa22745a9589e8610962b7dc59df09fb1f.1617981844.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-09net: hns3: Trivial spell fix in hns3 driverSalil Mehta
Some trivial spelling mistakes which caught my eye during the review of the code. Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Link: https://lore.kernel.org/r/20210409074223.32480-1-salil.mehta@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-09lan743x: fix ethernet frame cutoff issueSven Van Asbroeck
The ethernet frame length is calculated incorrectly. Depending on the value of RX_HEAD_PADDING, this may result in ethernet frames that are too short (cut off at the end), or too long (garbage added to the end). Fix by calculating the ethernet frame length correctly. For added clarity, use the ETH_FCS_LEN constant in the calculation. Many thanks to Heiner Kallweit for suggesting this solution. Suggested-by: Heiner Kallweit <hkallweit1@gmail.com> Fixes: 3e21a10fdea3 ("lan743x: trim all 4 bytes of the FCS; not just 2") Link: https://lore.kernel.org/lkml/20210408172353.21143-1-TheSven73@gmail.com/ Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Reviewed-by: George McCollister <george.mccollister@gmail.com> Tested-by: George McCollister <george.mccollister@gmail.com> Link: https://lore.kernel.org/r/20210409003904.8957-1-TheSven73@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-09Merge tag 'arm-soc/for-5.13/maintainers' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into arm/soc This pull request contains Broadcom SoC MAINTAINERS file entries and .mailmap updates for 5.13, please pull the following: - Nicolas updates his maintainer email to a kernel.org address for continuity * tag 'arm-soc/for-5.13/maintainers' of https://github.com/Broadcom/stblinux: mailmap: Update email address for Nicolas Saenz MAINTAINERS: Update BCM2711/BCM2335 maintainer's mail Link: https://lore.kernel.org/r/20210409175018.3051283-1-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-09MAINTAINERS: Update ARM/UniPhier SoCs maintainers and statusKunihiko Hayashi
Mark the UniPhier platform maintained and Masami Hiramatsu and Kunihiko Hayashi are taking over maintainership of the UniPhier platform. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lore.kernel.org/r/1617986171-20346-1-git-send-email-hayashi.kunihiko@socionext.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-10Merge tag 'drm-misc-next-2021-04-09' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.13: UAPI Changes: Cross-subsystem Changes: Core Changes: - bridge: Fix Kconfig dependency - cmdline: Refuse zero width/height mode - ttm: Ignore signaled move fences, ioremap buffer according to mem caching settins Driver Changes: - Conversions to sysfs_emit - tegra: Don't register DP AUX channels before connectors - zynqmp: Fix for an out-of-bound (but within struct padding) memset Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210409090020.jroa2d4p4qansrpa@gilmour
2021-04-09Merge tag 'qcom-drivers-for-5.13-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers More Qualcomm driver updates for 5.13 This improves the Qualcomm SCM driver logic related to detecting the calling convention, in particular on SC7180, and fixes a few small issues in the same. It introduces additonal sanity checks of the size of loaded segments in the MDT loader and adds a missing error in the return path of pdr_register_listener(). It makes it possible to specify the OEM specific firmware path in the wcn36xx control (and WiFi) driver. Lastly it adds a missing path specifier in the MAINTAINERS' entry and fixes a bunch of kerneldoc issues in various drivers. * tag 'qcom-drivers-for-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: mdt_loader: Detect truncated read of segments soc: qcom: mdt_loader: Validate that p_filesz < p_memsz soc: qcom: pdr: Fix error return code in pdr_register_listener firmware: qcom_scm: Fix kernel-doc function names to match firmware: qcom_scm: Suppress sysfs bind attributes firmware: qcom_scm: Workaround lack of "is available" call on SC7180 firmware: qcom_scm: Reduce locking section for __get_convention() firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool soc: qcom: wcnss_ctrl: Allow reading firmware-name from DT soc: qcom: wcnss_ctrl: Introduce local variable "dev" dt-bindings: soc: qcom: wcnss: Add firmware-name property soc: qcom: address kernel-doc warnings MAINTAINERS: add another entry for ARM/QUALCOMM SUPPORT Link: https://lore.kernel.org/r/20210409162001.775851-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-09Merge tag 'amlogic-dt64-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: amlogic: updates for v5.13 (round 2) - updates/cleanups for Hardkernel Odroid N2/N2+ * tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson: add GPIO line names to ODROID N2/N2+ arm64: dts: meson: add saradc node to ODROID N2/N2+ arm64: dts: meson: remove extra tab from ODROID N2/N2+ ext_mdio node Link: https://lore.kernel.org/r/7htuofgwaz.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-09Merge tag 'qcom-arm64-for-5.13-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt More Qualcomm ARM64 DT updates for 5.13 This adds RPMh regulators, coresight, AOSS qmp, ipcc, llcc for the SC7280. It adds interconnect, PRNG and thermal pieces to SM8350. It specifies the now required clocks for the SDM845 gcc, corrects the firmware-name for adsp and cdsp on the db845c and defines DSI and panel bits for Xiaomi Pocophone F1. SM8150 gains iommu settings and the remaining I2C controllers and SM8250 gains Venus and the QMP PHY is updated to include the DP portion. It adds the MSM8998 based OnePlus 5/5T device and enables sound support on the Trogdor device family. Lastly it adds the GIC hypervisor registers & interrupt for when Linux is booted in EL2 on MSM8916. * tag 'qcom-arm64-for-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (25 commits) arm64: dts: qcom: update usb qmp phy clock-cells property arm64: dts: qcom: msm8916: Add GICv2 hypervisor registers/interrupt arm64: dts: sdm845-db845c: make firmware filenames follow linux-firmware arm64: dts: qcom: sdm845-xiaomi-beryllium: Add DSI and panel bits arm64: dts: qcom: sc7280: Add Coresight support arm64: dts: qcom: sc7280: Add AOSS QMP node arm64: dts: qcom: sc7280: Add IPCC for SC7280 SoC arm64: dts: qcom: sc7280: Add device tree node for LLCC arm64: dts: qcom: Add support for OnePlus 5/5T arm64: dts: qcom: msm8998: Disable MSS remoteproc by default arm64: dts: qcom: Move rmtfs memory region arm64: dts: qcom: Add sound node for sc7180-trogdor-coachz arm64: dts: qcom: sc7180-trogdor: Add lpass dai link for I2S driver arm64: dts: qcom: use dp_phy to provide clocks to dispcc arm64: dts: qcom: sm8250: switch usb1 qmp phy to USB3+DP mode arm64: dts: qcom: sm8250: Add venus DT node arm64: dts: qcom: sm8250: Add videocc DT node arm64: dts: qcom: sm8350: Add interconnects arm64: dts: qcom: sm8350: Add support for PRNG EE arm64: dts: qcom: sc7280: Add RPMh regulators for sc7280-idp ... Link: https://lore.kernel.org/r/20210409163949.776530-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-09Merge tag 'qcom-dts-for-5.13' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm dts updates for v5.13 This adds Bluetooth support on the Samsung Galaxy S5, corrects the mount matrix for the IMU on Nexus 5 and corrects the fuel gauge irq trigger for the two devices. * tag 'qcom-dts-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: msm8974-klte: Add bluetooth support ARM: dts: qcom: msm8974: add blsp2_uart8 ARM: dts: qcom: msm8974-samsung-klte: correct fuel gauge interrupt trigger level ARM: dts: qcom: msm8974-lge-nexus5: correct fuel gauge interrupt trigger level ARM: dts: qcom: msm8974-hammerhead: add mount matrix for IMU Link: https://lore.kernel.org/r/20210409162359.776076-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-09of: property: fw_devlink: do not link ".*,nr-gpios"Ilya Lipnitskiy
[<vendor>,]nr-gpios property is used by some GPIO drivers[0] to indicate the number of GPIOs present on a system, not define a GPIO. nr-gpios is not configured by #gpio-cells and can't be parsed along with other "*-gpios" properties. nr-gpios without the "<vendor>," prefix is not allowed by the DT spec[1], so only add exception for the ",nr-gpios" suffix and let the error message continue being printed for non-compliant implementations. [0] nr-gpios is referenced in Documentation/devicetree/bindings/gpio: - gpio-adnp.txt - gpio-xgene-sb.txt - gpio-xlp.txt - snps,dw-apb-gpio.yaml [1] Link: https://github.com/devicetree-org/dt-schema/blob/cb53a16a1eb3e2169ce170c071e47940845ec26e/schemas/gpio/gpio-consumer.yaml#L20 Fixes errors such as: OF: /palmbus@300000/gpio@600: could not find phandle Fixes: 7f00be96f125 ("of: property: Add device link support for interrupt-parent, dmas and -gpio(s)") Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: Saravana Kannan <saravanak@google.com> Cc: stable@vger.kernel.org # v5.5+ Link: https://lore.kernel.org/r/20210405222540.18145-1-ilya.lipnitskiy@gmail.com Signed-off-by: Rob Herring <robh@kernel.org>
2021-04-09dt-bindings:iio:adc: update motorola,cpcap-adc.yaml referenceMauro Carvalho Chehab
Changeset 1ca9d1b1342d ("dt-bindings:iio:adc:motorola,cpcap-adc yaml conversion") renamed: Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt to: Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml. Update its cross-reference accordingly. Fixes: 1ca9d1b1342d ("dt-bindings:iio:adc:motorola,cpcap-adc yaml conversion") Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/3e205e5fa701e4bc15d39d6ac1f57717df2bb4c6.1617972339.git.mchehab+huawei@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2021-04-10erofs: enable big pcluster featureGao Xiang
Enable COMPR_CFGS and BIG_PCLUSTER since the implementations are all settled properly. Link: https://lore.kernel.org/r/20210407043927.10623-11-xiang@kernel.org Acked-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
2021-04-10erofs: support decompress big pcluster for lz4 backendGao Xiang
Prior to big pcluster, there was only one compressed page so it'd easy to map this. However, when big pcluster is enabled, more work needs to be done to handle multiple compressed pages. In detail, - (maptype 0) if there is only one compressed page + no need to copy inplace I/O, just map it directly what we did before; - (maptype 1) if there are more compressed pages + no need to copy inplace I/O, vmap such compressed pages instead; - (maptype 2) if inplace I/O needs to be copied, use per-CPU buffers for decompression then. Another thing is how to detect inplace decompression is feasable or not (it's still quite easy for non big pclusters), apart from the inplace margin calculation, inplace I/O page reusing order is also needed to be considered for each compressed page. Currently, if the compressed page is the xth page, it shouldn't be reused as [0 ... nrpages_out - nrpages_in + x], otherwise a full copy will be triggered. Although there are some extra optimization ideas for this, I'd like to make big pcluster work correctly first and obviously it can be further optimized later since it has nothing with the on-disk format at all. Link: https://lore.kernel.org/r/20210407043927.10623-10-xiang@kernel.org Acked-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
2021-04-10erofs: support parsing big pcluster compact indexesGao Xiang
Different from non-compact indexes, several lclusters are packed as the compact form at once and an unique base blkaddr is stored for each pack, so each lcluster index would take less space on avarage (e.g. 2 bytes for COMPACT_2B.) btw, that is also why BIG_PCLUSTER switch should be consistent for compact head0/1. Prior to big pcluster, the size of all pclusters was 1 lcluster. Therefore, when a new HEAD lcluster was scanned, blkaddr would be bumped by 1 lcluster. However, that way doesn't work anymore for big pcluster since we actually don't know the compressed size of pclusters in advance (before reading CBLKCNT lcluster). So, instead, let blkaddr of each pack be the first pcluster blkaddr with a valid CBLKCNT, in detail, 1) if CBLKCNT starts at the pack, this first valid pcluster is itself, e.g. _____________________________________________________________ |_CBLKCNT0_|_NONHEAD_| .. |_HEAD_|_CBLKCNT1_| ... |_HEAD_| ... ^ = blkaddr base ^ += CBLKCNT0 ^ += CBLKCNT1 2) if CBLKCNT doesn't start at the pack, the first valid pcluster is the next pcluster, e.g. _________________________________________________________ | NONHEAD_| .. |_HEAD_|_CBLKCNT0_| ... |_HEAD_|_HEAD_| ... ^ = blkaddr base ^ += CBLKCNT0 ^ += 1 When a CBLKCNT is found, blkaddr will be increased by CBLKCNT lclusters, or a new HEAD is found immediately, bump blkaddr by 1 instead (see the picture above.) Also noted if CBLKCNT is the end of the pack, instead of storing delta1 (distance of the next HEAD lcluster) as normal NONHEADs, it still uses the compressed block count (delta0) since delta1 can be calculated indirectly but the block count can't. Adjust decoding logic to fit big pcluster compact indexes as well. Link: https://lore.kernel.org/r/20210407043927.10623-9-xiang@kernel.org Acked-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
2021-04-10erofs: support parsing big pcluster compress indexesGao Xiang
When INCOMPAT_BIG_PCLUSTER sb feature is enabled, legacy compress indexes will also have the same on-disk header compact indexes to keep per-file configurations instead of leaving it zeroed. If ADVISE_BIG_PCLUSTER is set for a file, CBLKCNT will be loaded for each pcluster in this file by parsing 1st non-head lcluster. Link: https://lore.kernel.org/r/20210407043927.10623-8-xiang@kernel.org Acked-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
2021-04-10erofs: adjust per-CPU buffers according to max_pclusterblksGao Xiang
Adjust per-CPU buffers on demand since big pcluster definition is available. Also, bail out unsupported pcluster size according to Z_EROFS_PCLUSTER_MAX_SIZE. Link: https://lore.kernel.org/r/20210407043927.10623-7-xiang@kernel.org Acked-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
2021-04-10erofs: add big physical cluster definitionGao Xiang
Big pcluster indicates the size of compressed data for each physical pcluster is no longer fixed as block size, but could be more than 1 block (more accurately, 1 logical pcluster) When big pcluster feature is enabled for head0/1, delta0 of the 1st non-head lcluster index will keep block count of this pcluster in lcluster size instead of 1. Or, the compressed size of pcluster should be 1 lcluster if pcluster has no non-head lcluster index. Also note that BIG_PCLUSTER feature reuses COMPR_CFGS feature since it depends on COMPR_CFGS and will be released together. Link: https://lore.kernel.org/r/20210407043927.10623-6-xiang@kernel.org Acked-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
2021-04-10erofs: fix up inplace I/O pointer for big pclusterGao Xiang
When picking up inplace I/O pages, it should be traversed in reverse order in aligned with the traversal order of file-backed online pages. Also, index should be updated together when preloading compressed pages. Previously, only page-sized pclustersize was supported so no problem at all. Also rename `compressedpages' to `icpage_ptr' to reflect its functionality. Link: https://lore.kernel.org/r/20210407043927.10623-5-xiang@kernel.org Acked-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
2021-04-10erofs: introduce physical cluster slab poolsGao Xiang
Since multiple pcluster sizes could be used at once, the number of compressed pages will become a variable factor. It's necessary to introduce slab pools rather than a single slab cache now. This limits the pclustersize to 1M (Z_EROFS_PCLUSTER_MAX_SIZE), and get rid of the obsolete EROFS_FS_CLUSTER_PAGE_LIMIT, which has no use now. Link: https://lore.kernel.org/r/20210407043927.10623-4-xiang@kernel.org Acked-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
2021-04-10erofs: introduce multipage per-CPU buffersGao Xiang
To deal the with the cases which inplace decompression is infeasible for some inplace I/O. Per-CPU buffers was introduced to get rid of page allocation latency and thrash for low-latency decompression algorithms such as lz4. For the big pcluster feature, introduce multipage per-CPU buffers to keep such inplace I/O pclusters temporarily as well but note that per-CPU pages are just consecutive virtually. When a new big pcluster fs is mounted, its max pclustersize will be read and per-CPU buffers can be growed if needed. Shrinking adjustable per-CPU buffers is more complex (because we don't know if such size is still be used), so currently just release them all when unloading. Link: https://lore.kernel.org/r/20210409190630.19569-1-xiang@kernel.org Acked-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
2021-04-09dt-bindings: fix references for iio-bindings.txtMauro Carvalho Chehab
The iio-bindings.txt was converted into two files and merged at the dt-schema git tree at: https://github.com/devicetree-org/dt-schema Yet, some documents still refer to the old file. Fix their references, in order to point to the right URL. Fixes: dba91f82d580 ("dt-bindings:iio:iio-binding.txt Drop file as content now in dt-schema") Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/4efd81eca266ca0875d3bf9d1672097444146c69.1617972339.git.mchehab+huawei@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2021-04-09dt-bindings: don't use ../dir for doc referencesMauro Carvalho Chehab
As documents have been renamed and moved around, their references will break, but this will be unnoticed, as the script which checks for it won't handle "../" references. So, replace them by the full patch. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/68d3a1244119d1f2829c375b0ef554cf348bc89f.1617972339.git.mchehab+huawei@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2021-04-10Merge tag 'drm-intel-fixes-2021-04-09' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix invalid access to ACPI _DSM objects (Takashi) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YHAW6NInrybUoat6@intel.com
2021-04-10Merge tag 'drm-misc-fixes-2021-04-09' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.12-rc7: - Fix use-after-free in xen. - Reduce fifo threshold on hvs4 to fix a fifo full error. - Disable TE support for Droid4 and N950. - Small compiler fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e7647dd9-60c3-9dfd-a377-89d717212e13@linux.intel.com
2021-04-09drm/msm/disp/dpu1: fix display underruns during modeset.Kalyan Thota
During crtc disable, display perf structures are reset to 0 which includes state varibles which are immutable. On crtc enable, we use the same structures and they don't refelect the actual values 1) Fix is to avoid updating the state structures during disable. 2) Reset the perf structures during atomic check when there is no modeset enable. Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org> Reported-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/1616158446-19290-1-git-send-email-kalyan_t@codeaurora.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-04-09drm/msm/mdp5: Disable pingpong autorefresh at tearcheck initAngeloGioacchino Del Regno
If pp autorefresh is up (from bootloader splash), we will surely get vblank and pp timeouts. Ensure it is turned off. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Link: https://lore.kernel.org/r/20210406214726.131534-4-marijn.suijten@somainline.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-04-09drm/msm/mdp5: Do not multiply vclk line count by 100Marijn Suijten
Neither vtotal nor drm_mode_vrefresh contain a value that is premultiplied by 100 making the x100 variable name incorrect and resulting in vclks_line to become 100 times larger than it is supposed to be. The hardware counts 100 clockticks too many before tearcheck, leading to severe panel issues on at least the Sony Xperia lineup. This is likely an artifact from the original MDSS DSI panel driver where the calculation [1] corrected for a premultiplied reference framerate by 100 [2]. It does not appear that the above values were ever premultiplied in the history of the DRM MDP5 driver. With this change applied the value written to the SYNC_CONFIG_VSYNC register is now identical to downstream kernels. [1]: https://source.codeaurora.org/quic/la/kernel/msm-3.18/tree/drivers/video/msm/mdss/mdss_mdp_intf_cmd.c?h=LA.UM.8.6.c26-02400-89xx.0#n288 [2]: https://source.codeaurora.org/quic/la/kernel/msm-3.18/tree/drivers/video/msm/mdss/mdss_dsi_panel.c?h=LA.UM.8.6.c26-02400-89xx.0#n1648 Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Link: https://lore.kernel.org/r/20210406214726.131534-3-marijn.suijten@somainline.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-04-09drm/msm/mdp5: Configure PP_SYNC_HEIGHT to double the vtotalMarijn Suijten
Leaving this at a close-to-maximum register value 0xFFF0 means it takes very long for the MDSS to generate a software vsync interrupt when the hardware TE interrupt doesn't arrive. Configuring this to double the vtotal (like some downstream kernels) leads to a frame to take at most twice before the vsync signal, until hardware TE comes up. In this case the hardware interrupt responsible for providing this signal - "disp-te" gpio - is not hooked up to the mdp5 vsync/pp logic at all. This solves severe panel update issues observed on at least the Xperia Loire and Tone series, until said gpio is properly hooked up to an irq. Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210406214726.131534-2-marijn.suijten@somainline.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-04-09Merge tag 'selinux-pr-20210409' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux fixes from Paul Moore: "Three SELinux fixes. These fix known problems relating to (re)loading SELinux policy or changing the policy booleans, and pass our test suite without problem" * tag 'selinux-pr-20210409' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: fix race between old and new sidtab selinux: fix cond_list corruption when changing booleans selinux: make nslot handling in avtab more robust
2021-04-09mailmap: Update email address for Nicolas SaenzNicolas Saenz Julienne
Add my kernel.org address for old email address. Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-04-09MAINTAINERS: Update BCM2711/BCM2335 maintainer's mailNicolas Saenz Julienne
The @kernel.org e-mail address is likely to last longer than the current one, so use it. Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-04-09Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull vdpa/mlx5 fixes from Michael Tsirkin: "Last minute fixes. These all look like something we are better off having than not ..." * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpa/mlx5: Fix suspend/resume index restoration vdpa/mlx5: Fix wrong use of bit numbers vdpa/mlx5: Retrieve BAR address suitable any function vdpa/mlx5: Use the correct dma device when registering memory vdpa/mlx5: should exclude header length and fcs from mtu
2021-04-09Merge tag 'rproc-v5.12-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull remoteproc fixes from Bjorn Andersson: "This fixes an issue with firmware loading on the TI K3 PRU, fixes compatibility with GNU binutils for the same and resolves link error due to a 64-bit division in the Qualcomm PIL info. It also recognizes Mathieu Poirier as co-maintainer of the remoteproc and rpmsg subsystems" * tag 'rproc-v5.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: remoteproc: pru: Fix firmware loading crashes on K3 SoCs remoteproc: pru: Fix loading of GNU Binutils ELF MAINTAINERS: Add co-maintainer for remoteproc/RPMSG subsystems remoteproc: qcom: pil_info: avoid 64-bit division
2021-04-09Merge tag 'for-linus-5.12b-rc7-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fix from Juergen Gross: "A single fix of a 5.12 patch for the rather uncommon problem of running as a Xen guest with a real time kernel config" * tag 'for-linus-5.12b-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/evtchn: Change irq_info lock to raw_spinlock_t
2021-04-09Merge tag 'acpi-5.12-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Fix a build issue introduced by a previous fix in the ACPI processor driver (Vitaly Kuznetsov)" * tag 'acpi-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: processor: Fix build when CONFIG_ACPI_PROCESSOR=m
2021-04-09vdpa/mlx5: Fix suspend/resume index restorationEli Cohen
When we suspend the VM, the VDPA interface will be reset. When the VM is resumed again, clear_virtqueues() will clear the available and used indices resulting in hardware virqtqueue objects becoming out of sync. We can avoid this function alltogether since qemu will clear them if required, e.g. when the VM went through a reboot. Moreover, since the hw available and used indices should always be identical on query and should be restored to the same value same value for virtqueues that complete in order, we set the single value provided by set_vq_state(). In get_vq_state() we return the value of hardware used index. Fixes: b35ccebe3ef7 ("vdpa/mlx5: Restore the hardware used index after change map") Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210408091047.4269-6-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2021-04-09vdpa/mlx5: Fix wrong use of bit numbersEli Cohen
VIRTIO_F_VERSION_1 is a bit number. Use BIT_ULL() with mask conditionals. Also, in mlx5_vdpa_is_little_endian() use BIT_ULL for consistency with the rest of the code. Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210408091047.4269-5-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2021-04-09vdpa/mlx5: Retrieve BAR address suitable any functionEli Cohen
struct mlx5_core_dev has a bar_addr field that contains the correct bar address for the function regardless of whether it is pci function or sub function. Use it. Fixes: 1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver") Signed-off-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Link: https://lore.kernel.org/r/20210408091047.4269-4-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2021-04-09vdpa/mlx5: Use the correct dma device when registering memoryEli Cohen
In cases where the vdpa instance uses a SF (sub function), the DMA device is the parent device. Use a function to retrieve the correct DMA device. Fixes: 1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver") Signed-off-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Link: https://lore.kernel.org/r/20210408091047.4269-3-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2021-04-09vdpa/mlx5: should exclude header length and fcs from mtuSi-Wei Liu
When feature VIRTIO_NET_F_MTU is negotiated on mlx5_vdpa, 22 extra bytes worth of MTU length is shown in guest. This is because the mlx5_query_port_max_mtu API returns the "hardware" MTU value, which does not just contain the Ethernet payload, but includes extra lengths starting from the Ethernet header up to the FCS altogether. Fix the MTU so packets won't get dropped silently. Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210408091047.4269-2-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-04-09Bluetooth: btusb: Revert Fix the autosuspend enable and disableHans de Goede
drivers/usb/core/hub.c: usb_new_device() contains the following: /* By default, forbid autosuspend for all devices. It will be * allowed for hubs during binding. */ usb_disable_autosuspend(udev); So for anything which is not a hub, such as btusb devices, autosuspend is disabled by default and we must call usb_enable_autosuspend(udev) to enable it. This means that the "Fix the autosuspend enable and disable" commit, which drops the usb_enable_autosuspend() call when the enable_autosuspend module option is true, is completely wrong, revert it. This reverts commit 7bd9fb058d77213130e4b3e594115c028b708e7e. Cc: Hui Wang <hui.wang@canonical.com> Fixes: 7bd9fb058d77 ("Bluetooth: btusb: Fix the autosuspend enable and disable") Acked-by: Hui Wang <hui.wang@canonical.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-09-23 15:27:48 +0000