summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-02-14firmware/sysfb: Update screen_info for relocated EFI framebuffersThomas Zimmermann
On ARM PCI systems, the PCI hierarchy might be reconfigured during boot and the firmware framebuffer might move as a result of that. The values in screen_info will then be invalid. Work around this problem by tracking the framebuffer's initial location before it get relocated; then fix the screen_info state between reloaction and creating the firmware framebuffer's device. This functionality has been lifted from efifb. See the commit message of commit 55d728a40d36 ("efi/fb: Avoid reconfiguration of BAR that covers the framebuffer") for more information. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240212090736.11464-8-tzimmermann@suse.de
2024-02-14fbdev/efifb: Do not track parent device statusThomas Zimmermann
There will be no EFI framebuffer device for disabled parent devices and thus we never probe efifb in that case. Hence remove the tracking code from efifb. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240212090736.11464-7-tzimmermann@suse.de
2024-02-14firmware/sysfb: Create firmware device only for enabled PCI devicesThomas Zimmermann
Test if the firmware framebuffer's parent PCI device, if any, has been enabled. If not, the firmware framebuffer is most likely not working. Hence, do not create a device for the firmware framebuffer on disabled PCI devices. So far, efifb tracked the status of the PCI parent device internally and did not bind if it was disabled. This patch implements the functionality for all PCI-based firmware framebuffers. v3: * make commit message more precise (Sui) v2: * rework sysfb_pci_dev_is_enabled() (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240212090736.11464-6-tzimmermann@suse.de
2024-02-14fbdev/efifb: Remove PM for parent deviceThomas Zimmermann
The EFI device has the correct parent device set. This allows Linux to handle the power management internally. Hence, remove the manual PM management for the parent device from efifb. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240212090736.11464-5-tzimmermann@suse.de
2024-02-14firmware/sysfb: Set firmware-framebuffer parent deviceThomas Zimmermann
Set the firmware framebuffer's parent device, which usually is the graphics hardware's physical device. Integrates the framebuffer in the Linux device hierarchy and lets Linux handle dependencies among devices. For example, the graphics hardware won't be suspended while the firmware device is still active. v4: * fix build for CONFIG_SYSFB_SIMPLEFB=n, again v3: * fix build for CONFIG_SYSFB_SIMPLEFB=n (Sui) * test result of screen_info_pci_dev() for errors (Sui) v2: * detect parent device in sysfb_parent_dev() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240212090736.11464-4-tzimmermann@suse.de
2024-02-14video: Provide screen_info_get_pci_dev() to find screen_info's PCI deviceThomas Zimmermann
Add screen_info_get_pci_dev() to find the PCI device of an instance of screen_info. Does nothing on systems without PCI bus. v3: * search PCI device with pci_get_base_class() (Sui) v2: * remove ret from screen_info_pci_dev() (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240212090736.11464-3-tzimmermann@suse.de
2024-02-14video: Add helpers for decoding screen_infoThomas Zimmermann
The plain values as stored in struct screen_info need to be decoded before being used. Add helpers that decode the type of video output and the framebuffer I/O aperture. Old or non-x86 systems may not set the type of video directly, but only indicate the presence by storing 0x01 in orig_video_isVGA. The decoding logic in screen_info_video_type() takes this into account. It then follows similar code in vgacon's vgacon_startup() to detect the video type from the given values. A call to screen_info_resources() returns all known resources of the given screen_info. The resources' values have been taken from existing code in vgacon and vga16fb. These drivers can later be converted to use the new interfaces. v2: * return ssize_t from screen_info_resources() * don't call __screen_info_has_lfb() unnecessarily Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240212090736.11464-2-tzimmermann@suse.de
2024-02-13dt-bindings: display: rockchip,dw-hdmi: add power-domains propertyJohan Jonker
Most Rockchip hdmi nodes are part of a power domain. Add a power-domains property and include it to the example with some reordering to align with the (new) documentation about property ordering. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/5c45527a-e218-40a3-8e71-a5815417e5f7@gmail.com
2024-02-13dt-bindings: display: rockchip: rockchip,dw-hdmi: remove port propertyJohan Jonker
The hdmi-connector nodes are now functional and the new way to model hdmi ports nodes with both in and output port subnodes. Unfortunately with the conversion to YAML the old method with only an input port node was used. Later the new method was also added to the binding. A binding must be unambiguously, so remove the old port property entirely and make port@0 and port@1 a requirement as all upstream dts files are updated as well and because checking deprecated stuff is a bit pointless. Update the example to avoid use of the removed property. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/a493c65e-7cf9-455f-95d5-8c98cad35710@gmail.com
2024-02-13drm/panel: st7703: Add Panel Rotation SupportChris Morgan
Add support for panel rotation to ST7703 based devices. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240212184950.52210-5-macroalpha82@gmail.com
2024-02-13dt-bindings: display: rocktech,jh057n00900: Document panel rotationChris Morgan
Document the rotation property for rocktech,jh057n00900 panels. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240212184950.52210-4-macroalpha82@gmail.com
2024-02-13drm/panel: st7703: Add Powkiddy RGB10MAX3 Panel SupportChris Morgan
The Powkiddy RGB10MAX3 is a handheld device with a 5 inch 720x1280 display panel with a Sitronix ST7703 display controller. The panel is installed rotated 270 degrees. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240212184950.52210-3-macroalpha82@gmail.com
2024-02-13dt-bindings: display: Add Powkiddy RGB10MAX3 panelChris Morgan
The RGB10MAX3 panel is a panel specific to the Powkiddy RGB10MAX3 handheld device that measures 5 inches diagonally with a resolution of 720x1280. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240212184950.52210-2-macroalpha82@gmail.com
2024-02-13gpu: host1x: bus: make host1x_bus_type constRicardo B. Marliere
Since commit d492cc2573a0 ("driver core: device.h: make struct bus_type a const *"), the driver core can properly handle constant struct bus_type, move the host1x_bus_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240213-bus_cleanup-host1x-v1-1-54ec51b5d14f@marliere.net
2024-02-13drm/i915/selftests: Increasing the sleep time for live_rc6_manualAnirban Sk
Sometimes gt_pm live_rc6_manual selftest fails due to no power being measured for the rc6 disabled period. Therefore increasing the rc6 disable period from 250ms to 1000ms to rule out such sporadic failure. v3: - More descriptive and improved commit message (Anshuman) Signed-off-by: Anirban Sk <sk.anirban@intel.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240212050738.1162198-1-sk.anirban@intel.com
2024-02-13Revert "drm/amd: flush any delayed gfxoff on suspend entry"Mario Limonciello
commit ab4750332dbe ("drm/amdgpu/sdma5.2: add begin/end_use ring callbacks") caused GFXOFF control to be used more heavily and the codepath that was removed from commit 0dee72639533 ("drm/amd: flush any delayed gfxoff on suspend entry") now can be exercised at suspend again. Users report that by using GNOME to suspend the lockscreen trigger will cause SDMA traffic and the system can deadlock. This reverts commit 0dee726395333fea833eaaf838bc80962df886c8. Acked-by: Alex Deucher <alexander.deucher@amd.com> Fixes: ab4750332dbe ("drm/amdgpu/sdma5.2: add begin/end_use ring callbacks") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-13drm/amd: Stop evicting resources on APUs in suspendMario Limonciello
commit 5095d5418193 ("drm/amd: Evict resources during PM ops prepare() callback") intentionally moved the eviction of resources to earlier in the suspend process, but this introduced a subtle change that it occurs before adev->in_s0ix or adev->in_s3 are set. This meant that APUs actually started to evict resources at suspend time as well. Explicitly set s0ix or s3 in the prepare() stage, and unset them if the prepare() stage failed. v2: squash in warning fix from Stephen Rothwell Reported-by: Jürg Billeter <j@bitron.ch> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3132#note_2271038 Fixes: 5095d5418193 ("drm/amd: Evict resources during PM ops prepare() callback") Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-13drm/xe: fix arguments to drm_err_printer()Jani Nikula
The commit below changed drm_err_printer() arguments, but failed to update all places. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/r/20240213120410.75c45763@canb.auug.org.au Fixes: 5e0c04c8c40b ("drm/print: make drm_err_printer() device specific by using drm_err()") Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240213084954.878643-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-02-13Merge tag 'amd-drm-next-6.9-2024-02-09' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.9-2024-02-09: amdgpu: - Validate DMABuf imports in compute VMs - Add RAS ACA framework - PSP 13 fixes - Misc code cleanups - Replay fixes - Atom interpretor PS, WS bounds checking - DML2 fixes - Audio fixes - DCN 3.5 Z state fixes - Remove deprecated ida_simple usage - UBSAN fixes - RAS fixes - Enable seq64 infrastructure - DC color block enablement - Documentation updates - DC documentation updates - DMCUB updates - S3 fixes - VCN 4.0.5 fixes - DP MST fixes - SR-IOV fixes amdkfd: - Validate DMABuf imports in compute VMs - SVM fixes - Trap handler updates radeon: - Atom interpretor PS, WS bounds checking - Misc code cleanups UAPI: - Bump KFD version so UMDs know that the fixes that enable the management of VA mappings in compute VMs using the GEM_VA ioctl for DMABufs exported from KFD are present - Add INFO query for input power. This matches the existing INFO query for average power. Used in gaming HUDs, etc. Example userspace: https://github.com/Umio-Yasuno/libdrm-amdgpu-sys-rs/tree/input_power From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240209221459.5453-1-alexander.deucher@amd.com
2024-02-12drm/amdgpu/psp: update define to better align with its meaningAlex Deucher
MEM_TRAINING_ENCROACHED_SIZE is for BIST training data. It's not memory type specific. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12drm/amdgpu: respect the abmlevel module parameter value if it is setHamza Mahfooz
Currently, if the abmlevel module parameter is set, it is possible for user space to override the ABM level at some point after boot. However, that is undesirable because it means that we aren't respecting the user's wishes with regard to the level that they want to use. So, prevent user space from changing the ABM level if the module parameter is set to a non-auto value. Tested-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12drm/amd/display: fix NULL checks for adev->dm.dc in amdgpu_dm_fini()Nikita Zhandarovich
Since 'adev->dm.dc' in amdgpu_dm_fini() might turn out to be NULL before the call to dc_enable_dmub_notifications(), check beforehand to ensure there will not be a possible NULL-ptr-deref there. Also, since commit 1e88eb1b2c25 ("drm/amd/display: Drop CONFIG_DRM_AMD_DC_HDCP") there are two separate checks for NULL in 'adev->dm.dc' before dc_deinit_callbacks() and dc_dmub_srv_destroy(). Clean up by combining them all under one 'if'. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: 81927e2808be ("drm/amd/display: Support for DMUB AUX") Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12drm/radeon/ni: Fix wrong firmware size logging in ni_init_microcode()Nikita Zhandarovich
Clean up a typo in pr_err() erroneously printing NI MC 'rdev->mc_fw->size' during SMC firmware load. Log 'rdev->smc_fw->size' instead. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: 6596afd48af4 ("drm/radeon/kms: add dpm support for btc (v3)") Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12drm/amdgpu: Add jpeg_v5_0_0 ip block supportSonny Jiang
Enable support for jpeg_v5_0_0 ip block. Signed-off-by: Sonny Jiang <sonny.jiang@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12drm/amdgpu/jpeg5: Enable doorbellSonny Jiang
Add doorbell for JPEG5 Signed-off-by: Sonny Jiang <sonny.jiang@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12drm/amdgpu/jpeg5: add power gating supportSonny Jiang
Add PG support for JPEG5 Signed-off-by: Sonny Jiang <sonny.jiang@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12drm/amd/display: Fix possible buffer overflow in 'find_dcfclk_for_voltage()'Srinivasan Shanmugam
when 'find_dcfclk_for_voltage()' function is looping over VG_NUM_SOC_VOLTAGE_LEVELS (which is 8), but the size of the DcfClocks array is VG_NUM_DCFCLK_DPM_LEVELS (which is 7). When the loop variable i reaches 7, the function tries to access clock_table->DcfClocks[7]. However, since the size of the DcfClocks array is 7, the valid indices are 0 to 6. Index 7 is beyond the size of the array, leading to a buffer overflow. Reported by smatch & thus fixing the below: drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn301/vg_clk_mgr.c:550 find_dcfclk_for_voltage() error: buffer overflow 'clock_table->DcfClocks' 7 <= 7 Fixes: 3a83e4e64bb1 ("drm/amd/display: Add dcn3.01 support to DC (v2)") Cc: Roman Li <Roman.Li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12drm/amd/display: Fix possible use of uninitialized 'max_chunks_fbc_mode' in ↵Srinivasan Shanmugam
'calculate_bandwidth()' 'max_chunks_fbc_mode' is only declared and assigned a value under a specific condition in the following lines: if (data->fbc_en[i] == 1) { max_chunks_fbc_mode = 128 - dmif_chunk_buff_margin; } If 'data->fbc_en[i]' is not equal to 1 for any i, max_chunks_fbc_mode will not be initialized if it's used outside of this for loop. Ensure that 'max_chunks_fbc_mode' is properly initialized before it's used. Initialize it to a default value right after its declaration to ensure that it gets a value assigned under all possible control flow paths. Thus fixing the below: drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dce_calcs.c:914 calculate_bandwidth() error: uninitialized symbol 'max_chunks_fbc_mode'. drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dce_calcs.c:917 calculate_bandwidth() error: uninitialized symbol 'max_chunks_fbc_mode'. Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)") Cc: Harry Wentland <harry.wentland@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12drm/amd/display: Initialize 'wait_time_microsec' variable in ↵Srinivasan Shanmugam
link_dp_training_dpia.c wait_time_microsec = max(wait_time_microsec, (uint32_t) DPIA_CLK_SYNC_DELAY); Above line is trying to assign the maximum value between 'wait_time_microsec' and 'DPIA_CLK_SYNC_DELAY' to wait_time_microsec. However, 'wait_time_microsec' has not been assigned a value before this line, initialize 'wait_time_microsec' at the point of declaration. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_training_dpia.c:697 dpia_training_eq_non_transparent() error: uninitialized symbol 'wait_time_microsec'. Fixes: 630168a97314 ("drm/amd/display: move dp link training logic to link_dp_training") Cc: Wenjing Liu <wenjing.liu@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12drm/amdgpu: Add JPEG5 supportSonny Jiang
Add support for JPEG5 Signed-off-by: Sonny Jiang <sonny.jiang@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12amdgpu/drm: Add vcn_v5_0_0_ip_block supportSonny Jiang
Enable support for vcn_v5_0_0_ip_block Signed-off-by: Sonny Jiang <sonny.jiang@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12drm/amd/display: Fix && vs || typosDan Carpenter
These ANDs should be ORs or it will lead to a NULL dereference. Fixes: fb5a3d037082 ("drm/amd/display: Add NULL test for 'timing generator' in 'dcn21_set_pipe()'") Fixes: 886571d217d7 ("drm/amd/display: Fix 'panel_cntl' could be null in 'dcn21_set_backlight_level()'") Reviewed-by: Anthony Koo <anthony.koo@amd.com> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12drm/amdgpu: make damage clips support configurableHamza Mahfooz
We have observed that there are quite a number of PSR-SU panels on the market that are unable to keep up with what user space throws at them, resulting in hangs and random black screens. So, make damage clips support configurable and disable it by default for PSR-SU displays. Cc: stable@vger.kernel.org Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12drm/amdgpu: add VCN_5_0_0 IP block supportSonny Jiang
Add VCN_5_0_0 IP init, ring functions, DPG support. v2: squash in warning fixes (Alex) v3: squash in block and ring init, boot, doorbell enablement, DPG support (Alex) Signed-off-by: Sonny Jiang <sonny.jiang@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12drm/amdgpu: add VCN_5_0_0 firmware supportSonny Jiang
Add VCN5_0_0 firmware support Signed-off-by: Sonny Jiang <sonny.jiang@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12drm/amdgpu: Add vcn v5_0_0 ip headers (v5)Hawking Zhang
v1: Add vcn v5_0_0 register offset and shift masks header files. (Hawking) v2: Update vcn v5_0_0 register offset and shift masks header files to RE2. (Likun) v3: Update vcn v5_0_0 register offset and shift masks header files to RE2.5. (Likun) v4: Update vcn v5_0_0 register offset and shift masks header files to RE3. (Likun) v5: Clean up vcn v5_0_0 ip headers. (Alex) Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12drm/amdgpu/discovery: Add hdp v7_0 ip blockLikun Gao
Add hdp v7_0 ip block Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12drm/amdgpu: Add hdp v7_0 ip block supportLikun Gao
Add hdp v7_0 ip block support. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12drm/amdgpu: Add hdp v7_0_0 ip headers (v3)Hawking Zhang
v1: Add hdp v7_0_0 register offset and shift masks header files (Hawking) v2: Update hdp v7_0_0 register offset and shift masks header files for RE2.5 (Likun) v3: Clean up hdp v7_0_0 ip headers (Alex) Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12drm/amdgpu/discovery: Add ih v7_0 ip blockLikun Gao
Add ih v7_0 ip block. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12drm/amdgpu: Add ih v7_0 ip block supportLikun Gao
Add ih v7_0 ip block support. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12drm/amdgpu/jpeg: add support for jpeg DPG modeSaleemkhan Jamadar
Jpeg DPG support for GC IP v11_5_0 Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12drm/amdgpu: add ucode id for jpeg DPG supportSaleemkhan Jamadar
add ucode id and cmd buffer for jpeg psp sram programming and Jpeg DPG support. Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12drm/amdgpu: Add osssys v7_0_0 ip headers (v4)Hawking Zhang
v1: Add osssys v7_0_0 register offset and shift masks header files. (Hawking) v2: Update osssys v7_0_0 register offset and shift masks header files to RE2. (Likun) v3: Update osssys v7_0_0 register offset and shift masks header files to RE2.5. (Likun) v4: Clean up osssys v7_0_0 ip headers (Alex) Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12drm/amdgpu/discovery: Add lsdma v7_0 ip blockLikun Gao
Add lsdma v7_0 ip block. v2: squash in updates (Alex) Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12drm/amdgpu: Add lsdma v7_0 ip block supportLikun Gao
Add lsdma v7_0 ip block support. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12drm/amdgpu: Add lsdma v7_0_0 ip headers (v3)Hawking Zhang
v1: Add lsdma v7_0_0 register offset and shift masks header files (Hawking) v2: Update lsdma v7_0_0 register offset and shift masks header files for RE2.5 (Likun) v3: Clean up lsdma v7_0_0 ip headers (Alex) Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12drm/amdgpu: send smu rma reason event in ras eeprom driverYang Wang
send smu rma reason event to smu in ras eeprom driver. Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12drm/amdgpu: implement smu send rma reason for smu v13.0.6Yang Wang
implement smu send rma reason function for smu v13.0.6 Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12drm/amdgpu: Add athub v4_1_0 ip block supportHawking Zhang
Add athub v4_1_0 ip block support. v2: fix clang warning (Alex) Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-30 01:23:50 +0000