summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-06-14ata: libata-scsi: Set the RMB bit only for removable media devicesDamien Le Moal
The SCSI Removable Media Bit (RMB) should only be set for removable media, where the device stays and the media changes, e.g. CD-ROM or floppy. The ATA removable media device bit is obsoleted since ATA-8 ACS (2006), but before that it was used to indicate that the device can have its media removed (while the device stays). Commit 8a3e33cf92c7 ("ata: ahci: find eSATA ports and flag them as removable") introduced a change to set the RMB bit if the port has either the eSATA bit or the hot-plug capable bit set. The reasoning was that the author wanted his eSATA ports to get treated like a USB stick. This is however wrong. See "20-082r23SPC-6: Removable Medium Bit Expectations" which has since been integrated to SPC, which states that: """ Reports have been received that some USB Memory Stick device servers set the removable medium (RMB) bit to one. The rub comes when the medium is actually removed, because... The device server is removed concurrently with the medium removal. If there is no device server, then there is no device server that is waiting to have removable medium inserted. Sufficient numbers of SCSI analysts see such a device: - not as a device that supports removable medium; but - as a removable, hot pluggable device. """ The definition of the RMB bit in the SPC specification has since been clarified to match this. Thus, a USB stick should not have the RMB bit set (and neither shall an eSATA nor a hot-plug capable port). Commit dc8b4afc4a04 ("ata: ahci: don't mark HotPlugCapable Ports as external/removable") then changed so that the RMB bit is only set for the eSATA bit (and not for the hot-plug capable bit), because of a lot of bug reports of SATA devices were being automounted by udisks. However, treating eSATA and hot-plug capable ports differently is not correct. From the AHCI 1.3.1 spec: Hot Plug Capable Port (HPCP): When set to '1', indicates that this port's signal and power connectors are externally accessible via a joint signal and power connector for blindmate device hot plug. So a hot-plug capable port is an external port, just like commit 45b96d65ec68 ("ata: ahci: a hotplug capable port is an external port") claims. In order to not violate the SPC specification, modify the SCSI INQUIRY data to only set the RMB bit if the ATA device can have its media removed. This fixes a reported problem where GNOME/udisks was automounting devices connected to hot-plug capable ports. Fixes: 45b96d65ec68 ("ata: ahci: a hotplug capable port is an external port") Cc: stable@vger.kernel.org Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Tested-by: Thomas Weißschuh <linux@weissschuh.net> Reported-by: Thomas Weißschuh <linux@weissschuh.net> Closes: https://lore.kernel.org/linux-ide/c0de8262-dc4b-4c22-9fac-33432e5bddd3@t-8ch.de/ Signed-off-by: Damien Le Moal <dlemoal@kernel.org> [cassel: wrote commit message] Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-06-14drm/xe: Drop duplicated declarationMichal Wajdeczko
The declaration of xe_reg_whitelist_process_engine() function does not fit into "xe_wa.h" and is already a duplicate. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240613195702.2164-1-michal.wajdeczko@intel.com
2024-06-14ovl: fix encoding fid for lower only rootMiklos Szeredi
ovl_check_encode_origin() should return a positive number if the lower dentry is to be encoded, zero otherwise. If there's no upper layer at all (read-only overlay), then it obviously needs to return positive. This was broken by commit 16aac5ad1fa9 ("ovl: support encoding non-decodable file handles"), which didn't take the lower-only configuration into account. Fix by checking the no-upper-layer case up-front. Reported-and-tested-by: Youzhong Yang <youzhong@gmail.com> Closes: https://lore.kernel.org/all/CADpNCvaBimi+zCYfRJHvCOhMih8OU0rmZkwLuh24MKKroRuT8Q@mail.gmail.com/ Fixes: 16aac5ad1fa9 ("ovl: support encoding non-decodable file handles") Cc: <stable@vger.kernel.org> # v6.6 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2024-06-14Merge drm/drm-fixes into drm-misc-fixesMaxime Ripard
Roll -rc3 and current drm/fixes in. This will also unstuck our for-next branch. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-06-14mfd: axp20x: AXP717: Fix missing IRQ status registers rangeAndre Przywara
While we list the "IRQ status *and acknowledge*" registers as volatile in the MFD description, they are missing from the writable range array, so acknowledging any interrupts was met with an -EIO error. This error propagates up, leading to the whole AXP717 driver failing to probe, which is fatal to most systems using this PMIC, since most peripherals refer one of the PMIC voltage rails. This wasn't noticed on the initial submission, since the interrupt was completely missing at this point, but the DTs now merged describe the interrupt, creating the problem. Add the five registers that hold those bits to the writable array. This fixes the boot on the Anbernic systems using the AXP717 PMIC. Fixes: b5bfc8ab2484 ("mfd: axp20x: Add support for AXP717 PMIC") Reported-by: Chris Morgan <macromorgan@hotmail.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: John Watts <contact@jookia.org> Link: https://lore.kernel.org/r/20240613233104.17529-1-andre.przywara@arm.com Signed-off-by: Lee Jones <lee@kernel.org>
2024-06-14drm/i915: remove unused pipe/plane B register macrosJani Nikula
None of these are used. The parametrized register macros all depend on the pipe/plane A offset macros alone. Remove the unused ones. v2: Rebase Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/16d278bea466a69cdce94fd83d98dd15ce1a8c89.1717773890.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-06-14drm/i915: relocate some DSPCNTR reg bit definitionsJani Nikula
Some plane B/C specific bits were left next to the unused _DSPBCNTR macro. Move them next to the DSPCNTR() macro. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/85409fbe5073797c0dc17df43eeb25abe9ff889f.1717773890.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-06-14drm/i915/gvt: do not use implict dev_priv in DSPSURF_TO_PIPE()Jani Nikula
Do not rely on having dev_priv local variable, pass it to the macro. Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhi Wang <zhi.wang.linux@gmail.com> Cc: intel-gvt-dev@lists.freedesktop.org Reviewed-by: Zhi Wang <zhiwang@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/2ff78ebd0dc84178f5feacee7ef2a6cb4132b9ae.1717773890.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-06-14drm/i915/gvt: rename range variable to strideJani Nikula
Range is a bit odd name for what really is stride. Rename. Switch to u32 while at it. Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhi Wang <zhi.wang.linux@gmail.com> Cc: intel-gvt-dev@lists.freedesktop.org Reviewed-by: Zhi Wang <zhiwang@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/8b8d4acee15da07845ed1779d6856d5c3f50a132.1717773890.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-06-14drm/i915/gvt: use proper i915_reg_t for calc_index() parametersJani Nikula
In order to be able to use the proper register macros instead of the underscore prefixed ones, pass i915_reg_t for the calc_index() parameters. Side note: DSPSURF is really about planes, not pipes. Fixed stride doesn't work for plane C for CHV (but that's okay for gvt). This doesn't support planes beyond C either. But all that is unrelated to the change at hand. Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhi Wang <zhi.wang.linux@gmail.com> Cc: intel-gvt-dev@lists.freedesktop.org Reviewed-by: Zhi Wang <zhiwang@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/282b19c44d83c96b52c261cfc7218e7e54076cba.1717773890.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-06-14drm/i915/gvt: remove the unused end parameter from calc_index()Jani Nikula
All callers of calc_index() pass 0 for the end parameter. Remove it. Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhi Wang <zhi.wang.linux@gmail.com> Cc: intel-gvt-dev@lists.freedesktop.org Reviewed-by: Zhi Wang <zhiwang@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/aaa24a5cbcf876d3b95e0f5f6594f972a860b6bc.1717773890.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-06-14cipso: make cipso_v4_skbuff_delattr() fully remove the CIPSO optionsOndrej Mosnacek
As the comment in this function says, the code currently just clears the CIPSO part with IPOPT_NOP, rather than removing it completely and trimming the packet. The other cipso_v4_*_delattr() functions, however, do the proper removal and also calipso_skbuff_delattr() makes an effort to remove the CALIPSO options instead of replacing them with padding. Some routers treat IPv4 packets with anything (even NOPs) in the option header as a special case and take them through a slower processing path. Consequently, hardening guides such as STIG recommend to configure such routers to drop packets with non-empty IP option headers [1][2]. Thus, users might expect NetLabel to produce packets with minimal padding (or at least with no padding when no actual options are present). Implement the proper option removal to address this and to be closer to what the peer functions do. [1] https://www.stigviewer.com/stig/juniper_router_rtr/2019-09-27/finding/V-90937 [2] https://www.stigviewer.com/stig/cisco_ios_xe_router_rtr/2021-03-26/finding/V-217001 Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-14cipso: fix total option length computationOndrej Mosnacek
As evident from the definition of ip_options_get(), the IP option IPOPT_END is used to pad the IP option data array, not IPOPT_NOP. Yet the loop that walks the IP options to determine the total IP options length in cipso_v4_delopt() doesn't take IPOPT_END into account. Fix it by recognizing the IPOPT_END value as the end of actual options. Fixes: 014ab19a69c3 ("selinux: Set socket NetLabel based on connection endpoint") Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-14accel/ivpu: Remove unused ivpu_rpm_get_if_active()Jacek Lawrynowicz
This is now dead code and has to be removed. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Wachowski, Karol <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-16-jacek.lawrynowicz@linux.intel.com
2024-06-14accel/ivpu: Remove duplicated debug messagesJacek Lawrynowicz
Remove duplicated debug messages from ivpu_jsm_(un)register_db(). Debug messages are already printed one level higher. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Wachowski, Karol <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-15-jacek.lawrynowicz@linux.intel.com
2024-06-14accel/ivpu: Increase autosuspend delay to 100ms on 40xxAndrzej Kacprowski
The new HW is more power efficient and there is no need to enter the D0i3/D3 so quickly. Increasing autosuspend delay reduces latency in certain usage scenarios. Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-14-jacek.lawrynowicz@linux.intel.com
2024-06-14accel/ivpu: Synchronize device unbind with recovery workWachowski, Karol
Do not allow unbinding device in the middle of recovery flow. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-13-jacek.lawrynowicz@linux.intel.com
2024-06-14accel/ivpu: Disable MMU before checking for idleJacek Lawrynowicz
Disable MMU communication before checking if NPU is idle. NPU may otherwise be woken up when adding/removing contexts. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Wachowski, Karol <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-12-jacek.lawrynowicz@linux.intel.com
2024-06-14accel/ivpu: Add test mode flag for disabling timeoutsMaciej Falkowski
Add new test mode flag that will disable all timeouts defined in timeout fields of struct ivpu_device. Remove also reschedule_suspend field as it is unused. Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-11-jacek.lawrynowicz@linux.intel.com
2024-06-14accel/ivpu: Make parts of FW image read-onlyWachowski, Karol
Implement setting specified buffer ranges as read-only. In case if specified range is not 64K aligned and 64K contiguous MMU600 pages are turned on, split 64K mapping to allow 4K granularity for read-only configuration. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-10-jacek.lawrynowicz@linux.intel.com
2024-06-14accel/ivpu: Update FW BOOT API headersWachowski, Karol
This commit bumps BOOT API version to 3.24 Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-9-jacek.lawrynowicz@linux.intel.com
2024-06-14wifi: mac80211: fix monitor channel with chanctx emulationJohannes Berg
After the channel context emulation, there were reports that changing the monitor channel no longer works. This is because those drivers don't have WANT_MONITOR_VIF, so the setting the channel always exits out quickly. Fix this by always allocating the virtual monitor sdata, and simply not telling the driver about it unless it wanted to. This way, we have an interface/sdata to bind the chanctx to, and the emulation can work correctly. Cc: stable@vger.kernel.org Fixes: 0a44dfc07074 ("wifi: mac80211: simplify non-chanctx drivers") Reported-and-tested-by: Savyasaachi Vanga <savyasaachiv@gmail.com> Closes: https://lore.kernel.org/r/chwoymvpzwtbmzryrlitpwmta5j6mtndocxsyqvdyikqu63lon@gfds653hkknl Link: https://msgid.link/20240612122351.b12d4a109dde.I1831a44417faaab92bea1071209abbe4efbe3fba@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-14accel/ivpu: Make selected params read-onlyJacek Lawrynowicz
Make disable_mmu_cont_pages and force_snoop params read-only. It is unsafe to change these params after driver is loaded. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Wachowski, Karol <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-8-jacek.lawrynowicz@linux.intel.com
2024-06-14accel/ivpu: Implement DCT handlingJacek Lawrynowicz
When host system is under heavy load and the NPU is already running on the lowest frequency, PUNIT may request Duty Cycle Throttling (DCT). This will further reduce NPU power usage. PUNIT requests DCT mode using Survabilty IRQ and mailbox register. The driver then issues a JSM message to the FW that enables the DCT mode. If the NPU resets while in DCT mode, the driver request DCT mode during FW boot. Also add debugfs "dct" file that allows to set arbitrary DCT percentage, which is used by driver tests. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Wachowski, Karol <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-7-jacek.lawrynowicz@linux.intel.com
2024-06-14accel/ivpu: Disable clock relinquish for MMIO resetWachowski, Karol
It is required to disable NPU clock relinquish for the time of MMIO reset. Clock relinquish gets into default (enabled) state after MMIO reset is performed. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-6-jacek.lawrynowicz@linux.intel.com
2024-06-14accel/ivpu: Disable disable_clock_relinquish WA for LNL B0+Wachowski, Karol
This WA is only needed for LNL revision A. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-5-jacek.lawrynowicz@linux.intel.com
2024-06-14accel/ivpu: Remove suspend_reschedule_counterJacek Lawrynowicz
Don't retry runtime suspend. It is now expected to succeed on the first try. After autosuspend_delay passed, FW should already be idle and ready for warm suspend. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Wachowski, Karol <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-4-jacek.lawrynowicz@linux.intel.com
2024-06-14accel/ivpu: Abort jobs of faulty contextMaciej Falkowski
Abort all jobs that belong to contexts generating MMU faults in order to avoid flooding host with MMU IRQs. Jobs are cancelled with: - SSID_RELEASE command when OS scheduling is enabled - DESTROY_CMDQ command when HW scheduling is enabled Signed-off-by: Maciej Falkowski <maciej.falkowski@intel.com> Co-developed-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-3-jacek.lawrynowicz@linux.intel.com
2024-06-14accel/ivpu: Add wp0_during_power_up WAWachowski, Karol
Send workpoint 0 request during power up on 37xx. This is needed in rare case where WP0 was not sent during power down due to device hang. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-2-jacek.lawrynowicz@linux.intel.com
2024-06-14wifi: mac80211: Avoid address calculations via out of bounds array indexingKenton Groombridge
req->n_channels must be set before req->channels[] can be used. This patch fixes one of the issues encountered in [1]. [ 83.964255] UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:364:4 [ 83.964258] index 0 is out of range for type 'struct ieee80211_channel *[]' [...] [ 83.964264] Call Trace: [ 83.964267] <TASK> [ 83.964269] dump_stack_lvl+0x3f/0xc0 [ 83.964274] __ubsan_handle_out_of_bounds+0xec/0x110 [ 83.964278] ieee80211_prep_hw_scan+0x2db/0x4b0 [ 83.964281] __ieee80211_start_scan+0x601/0x990 [ 83.964291] nl80211_trigger_scan+0x874/0x980 [ 83.964295] genl_family_rcv_msg_doit+0xe8/0x160 [ 83.964298] genl_rcv_msg+0x240/0x270 [...] [1] https://bugzilla.kernel.org/show_bug.cgi?id=218810 Co-authored-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <kees@kernel.org> Signed-off-by: Kenton Groombridge <concord@gentoo.org> Link: https://msgid.link/20240605152218.236061-1-concord@gentoo.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-14arm/komeda: Remove all CONFIG_DEBUG_FS conditional compilationspengfuyuan
Since the debugfs functions have no-op stubs for CONFIG_DEBUG_FS=n, the compiler will optimize the rest away since they are no longer referenced. The benefit of removing the conditional compilation is that the build is actually tested for both CONFIG_DEBUG_FS configuration values. Assuming most developers have it enabled, CONFIG_DEBUG_FS=n is not tested much and may fail the build due to the conditional compilation. Reported-by: k2ci <kernel-bot@kylinos.cn> Signed-off-by: pengfuyuan <pengfuyuan@kylinos.cn> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240606120842.1377267-1-pengfuyuan@kylinos.cn Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-06-14USB: class: cdc-wdm: Fix CPU lockup caused by excessive log messagesAlan Stern
The syzbot fuzzer found that the interrupt-URB completion callback in the cdc-wdm driver was taking too long, and the driver's immediate resubmission of interrupt URBs with -EPROTO status combined with the dummy-hcd emulation to cause a CPU lockup: cdc_wdm 1-1:1.0: nonzero urb status received: -71 cdc_wdm 1-1:1.0: wdm_int_callback - 0 bytes watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [syz-executor782:6625] CPU#0 Utilization every 4s during lockup: #1: 98% system, 0% softirq, 3% hardirq, 0% idle #2: 98% system, 0% softirq, 3% hardirq, 0% idle #3: 98% system, 0% softirq, 3% hardirq, 0% idle #4: 98% system, 0% softirq, 3% hardirq, 0% idle #5: 98% system, 1% softirq, 3% hardirq, 0% idle Modules linked in: irq event stamp: 73096 hardirqs last enabled at (73095): [<ffff80008037bc00>] console_emit_next_record kernel/printk/printk.c:2935 [inline] hardirqs last enabled at (73095): [<ffff80008037bc00>] console_flush_all+0x650/0xb74 kernel/printk/printk.c:2994 hardirqs last disabled at (73096): [<ffff80008af10b00>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (73096): [<ffff80008af10b00>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (73048): [<ffff8000801ea530>] softirq_handle_end kernel/softirq.c:400 [inline] softirqs last enabled at (73048): [<ffff8000801ea530>] handle_softirqs+0xa60/0xc34 kernel/softirq.c:582 softirqs last disabled at (73043): [<ffff800080020de8>] __do_softirq+0x14/0x20 kernel/softirq.c:588 CPU: 0 PID: 6625 Comm: syz-executor782 Tainted: G W 6.10.0-rc2-syzkaller-g8867bbd4a056 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Testing showed that the problem did not occur if the two error messages -- the first two lines above -- were removed; apparently adding material to the kernel log takes a surprisingly large amount of time. In any case, the best approach for preventing these lockups and to avoid spamming the log with thousands of error messages per second is to ratelimit the two dev_err() calls. Therefore we replace them with dev_err_ratelimited(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Suggested-by: Greg KH <gregkh@linuxfoundation.org> Reported-and-tested-by: syzbot+5f996b83575ef4058638@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-usb/00000000000073d54b061a6a1c65@google.com/ Reported-and-tested-by: syzbot+1b2abad17596ad03dcff@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-usb/000000000000f45085061aa9b37e@google.com/ Fixes: 9908a32e94de ("USB: remove err() macro from usb class drivers") Link: https://lore.kernel.org/linux-usb/40dfa45b-5f21-4eef-a8c1-51a2f320e267@rowland.harvard.edu/ Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/29855215-52f5-4385-b058-91f42c2bee18@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-13io_uring: fix cancellation overwriting req->flagsPavel Begunkov
Only the current owner of a request is allowed to write into req->flags. Hence, the cancellation path should never touch it. Add a new field instead of the flag, move it into the 3rd cache line because it should always be initialised. poll_refs can move further as polling is an involved process anyway. It's a minimal patch, in the future we can and should find a better place for it and remove now unused REQ_F_CANCEL_SEQ. Fixes: 521223d7c229f ("io_uring/cancel: don't default to setting req->work.cancel_seq") Cc: stable@vger.kernel.org Reported-by: Li Shi <sl1589472800@gmail.com> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/6827b129f8f0ad76fa9d1f0a773de938b240ffab.1718323430.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-06-14Merge tag 'drm-xe-fixes-2024-06-13' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes Core Changes: - Xe Maintainers update to MAINTAINERS file. Driver Changes: - Use correct forcewake assertions. - Assert that VRAM provisioning is only done on DGFX. - Flush render caches before user-fence signalling on all engines. - Move the disable_c6 call since it was sometimes never called. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZmrXV0FoBb8M0c6J@fedora
2024-06-13scsi: usb: uas: Do not query the IO Advice Hints Grouping mode page for ↵Bart Van Assche
USB/UAS devices Recently it was reported that the following USB storage devices are unusable with Linux kernel 6.9: * Kingston DataTraveler G2 * Garmin FR35 This is because attempting to read the IO Advice Hints Grouping mode page causes these devices to reset. Hence do not read the IO Advice Hints Grouping mode page from USB/UAS storage devices. Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable@vger.kernel.org Fixes: 4f53138fffc2 ("scsi: sd: Translate data lifetime information") Reported-by: Joao Machado <jocrismachado@gmail.com> Closes: https://lore.kernel.org/linux-scsi/20240130214911.1863909-1-bvanassche@acm.org/T/#mf4e3410d8f210454d7e4c3d1fb5c0f41e651b85f Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Bisected-by: Christian Heusel <christian@heusel.eu> Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com> Closes: https://lore.kernel.org/linux-scsi/CACLx9VdpUanftfPo2jVAqXdcWe8Y43MsDeZmMPooTzVaVJAh2w@mail.gmail.com/ Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240613211828.2077477-3-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-06-13scsi: core: Introduce the BLIST_SKIP_IO_HINTS flagBart Van Assche
Prepare for skipping the IO Advice Hints Grouping mode page for USB storage devices. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Joao Machado <jocrismachado@gmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Christian Heusel <christian@heusel.eu> Cc: stable@vger.kernel.org Fixes: 4f53138fffc2 ("scsi: sd: Translate data lifetime information") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240613211828.2077477-2-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-06-13scsi: ufs: core: Free memory allocated for model before reinitJoel Slebodnick
Under the conditions that a device is to be reinitialized within ufshcd_probe_hba(), the device must first be fully reset. Resetting the device should include freeing U8 model (member of dev_info) but does not, and this causes a memory leak. ufs_put_device_desc() is responsible for freeing model. unreferenced object 0xffff3f63008bee60 (size 32): comm "kworker/u33:1", pid 60, jiffies 4294892642 hex dump (first 32 bytes): 54 48 47 4a 46 47 54 30 54 32 35 42 41 5a 5a 41 THGJFGT0T25BAZZA 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc ed7ff1a9): [<ffffb86705f1243c>] kmemleak_alloc+0x34/0x40 [<ffffb8670511cee4>] __kmalloc_noprof+0x1e4/0x2fc [<ffffb86705c247fc>] ufshcd_read_string_desc+0x94/0x190 [<ffffb86705c26854>] ufshcd_device_init+0x480/0xdf8 [<ffffb86705c27b68>] ufshcd_probe_hba+0x3c/0x404 [<ffffb86705c29264>] ufshcd_async_scan+0x40/0x370 [<ffffb86704f43e9c>] async_run_entry_fn+0x34/0xe0 [<ffffb86704f34638>] process_one_work+0x154/0x298 [<ffffb86704f34a74>] worker_thread+0x2f8/0x408 [<ffffb86704f3cfa4>] kthread+0x114/0x118 [<ffffb86704e955a0>] ret_from_fork+0x10/0x20 Fixes: 96a7141da332 ("scsi: ufs: core: Add support for reinitializing the UFS device") Cc: <stable@vger.kernel.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Joel Slebodnick <jslebodn@redhat.com> Link: https://lore.kernel.org/r/20240613200202.2524194-1-jslebodn@redhat.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-06-14Merge tag 'exynos-drm-fixes-for-v6.10-rc4' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Regression fix - Fix an regression issue by adding 640x480 fallback mode for Exynos HDMI driver. Bug fix - Fix a memory leak by ensuring the duplicated EDID is properly freed in the get_modes function. Code cleanup - Remove redundant driver owner initialization since platform_driver_register() sets it automatically. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240610073839.37430-1-inki.dae@samsung.com
2024-06-13net: mvpp2: use slab_build_skb for oversized framesAryan Srivastava
Setting frag_size to 0 to indicate kmalloc has been deprecated, use slab_build_skb directly. Fixes: ce098da1497c ("skbuff: Introduce slab_build_skb()") Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz> Reviewed-by: Kees Cook <kees@kernel.org> Link: https://lore.kernel.org/r/20240613024900.3842238-1-aryan.srivastava@alliedtelesis.co.nz Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-13Merge tag 'nvme-6.10-2024-06-13' of git://git.infradead.org/nvme into block-6.10Jens Axboe
Pull NVMe fixes from Keith: "nvme fixes for Linux 6.10 - Discard double free on error conditions (Chunguang) - Target Fixes (Daniel) - Namespace detachment regression fix (Keith)" * tag 'nvme-6.10-2024-06-13' of git://git.infradead.org/nvme: nvme: fix namespace removal list nvmet: always initialize cqe.result nvmet-passthru: propagate status from id override functions nvme: avoid double free special payload
2024-06-13nvme: fix namespace removal listKeith Busch
This function wants to move a subset of a list from one element to the tail into another list. It also needs to use the srcu synchronize instead of the regular rcu version. Do this one element at a time because that's the only to do it. Fixes: be647e2c76b27f4 ("nvme: use srcu for iterating namespace list") Reported-by: Venkat Rao Bagalkote <venkat88@linux.vnet.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.vnet.ibm.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-06-13btrfs: zoned: allocate dummy checksums for zoned NODATASUM writesJohannes Thumshirn
Shin'ichiro reported that when he's running fstests' test-case btrfs/167 on emulated zoned devices, he's seeing the following NULL pointer dereference in 'btrfs_zone_finish_endio()': Oops: general protection fault, probably for non-canonical address 0xdffffc0000000011: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000088-0x000000000000008f] CPU: 4 PID: 2332440 Comm: kworker/u80:15 Tainted: G W 6.10.0-rc2-kts+ #4 Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020 Workqueue: btrfs-endio-write btrfs_work_helper [btrfs] RIP: 0010:btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs] RSP: 0018:ffff88867f107a90 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff893e5534 RDX: 0000000000000011 RSI: 0000000000000004 RDI: 0000000000000088 RBP: 0000000000000002 R08: 0000000000000001 R09: ffffed1081696028 R10: ffff88840b4b0143 R11: ffff88834dfff600 R12: ffff88840b4b0000 R13: 0000000000020000 R14: 0000000000000000 R15: ffff888530ad5210 FS: 0000000000000000(0000) GS:ffff888e3f800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f87223fff38 CR3: 00000007a7c6a002 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? die_addr+0x46/0x70 ? exc_general_protection+0x14f/0x250 ? asm_exc_general_protection+0x26/0x30 ? do_raw_read_unlock+0x44/0x70 ? btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs] btrfs_finish_one_ordered+0x5d9/0x19a0 [btrfs] ? __pfx_lock_release+0x10/0x10 ? do_raw_write_lock+0x90/0x260 ? __pfx_do_raw_write_lock+0x10/0x10 ? __pfx_btrfs_finish_one_ordered+0x10/0x10 [btrfs] ? _raw_write_unlock+0x23/0x40 ? btrfs_finish_ordered_zoned+0x5a9/0x850 [btrfs] ? lock_acquire+0x435/0x500 btrfs_work_helper+0x1b1/0xa70 [btrfs] ? __schedule+0x10a8/0x60b0 ? __pfx___might_resched+0x10/0x10 process_one_work+0x862/0x1410 ? __pfx_lock_acquire+0x10/0x10 ? __pfx_process_one_work+0x10/0x10 ? assign_work+0x16c/0x240 worker_thread+0x5e6/0x1010 ? __pfx_worker_thread+0x10/0x10 kthread+0x2c3/0x3a0 ? trace_irq_enable.constprop.0+0xce/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Enabling CONFIG_BTRFS_ASSERT revealed the following assertion to trigger: assertion failed: !list_empty(&ordered->list), in fs/btrfs/zoned.c:1815 This indicates, that we're missing the checksums list on the ordered_extent. As btrfs/167 is doing a NOCOW write this is to be expected. Further analysis with drgn confirmed the assumption: >>> inode = prog.crashed_thread().stack_trace()[11]['ordered'].inode >>> btrfs_inode = drgn.container_of(inode, "struct btrfs_inode", \ "vfs_inode") >>> print(btrfs_inode.flags) (u32)1 As zoned emulation mode simulates conventional zones on regular devices, we cannot use zone-append for writing. But we're only attaching dummy checksums if we're doing a zone-append write. So for NOCOW zoned data writes on conventional zones, also attach a dummy checksum. Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Fixes: cbfce4c7fbde ("btrfs: optimize the logical to physical mapping for zoned writes") CC: Naohiro Aota <Naohiro.Aota@wdc.com> # 6.6+ Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2024-06-13btrfs: retry block group reclaim without infinite loopBoris Burkov
If inc_block_group_ro systematically fails (e.g. due to ETXTBUSY from swap) or btrfs_relocate_chunk systematically fails (from lack of space), then this worker becomes an infinite loop. At the very least, this strands the cleaner thread, but can also result in hung tasks/RCU stalls on PREEMPT_NONE kernels and if the reclaim_bgs_lock mutex is not contended. I believe the best long term fix is to manage reclaim via work queue, where we queue up a relocation on the triggering condition and re-queue on failure. In the meantime, this is an easy fix to apply to avoid the immediate pain. Fixes: 7e2718099438 ("btrfs: reinsert BGs failed to reclaim") CC: stable@vger.kernel.org # 6.6+ Signed-off-by: Boris Burkov <boris@bur.io> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2024-06-13drm/xe/vf: Use correct check for being a VF driverMichal Wajdeczko
The IS_SRIOV macro returns true also when we are running as a PF driver. Use correct IS_SRIOV_VF macro to skip force-wake management. Fixes: 513ea833c201 ("drm/xe/vf: Ignore force-wake requests if VF") Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Piotr Piórkowski <piotr.piorkowski@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240613120749.2032-1-michal.wajdeczko@intel.com
2024-06-13ima: Avoid blocking in RCU read-side critical sectionGUO Zihua
A panic happens in ima_match_policy: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 PGD 42f873067 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 5 PID: 1286325 Comm: kubeletmonit.sh Kdump: loaded Tainted: P Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 RIP: 0010:ima_match_policy+0x84/0x450 Code: 49 89 fc 41 89 cf 31 ed 89 44 24 14 eb 1c 44 39 7b 18 74 26 41 83 ff 05 74 20 48 8b 1b 48 3b 1d f2 b9 f4 00 0f 84 9c 01 00 00 <44> 85 73 10 74 ea 44 8b 6b 14 41 f6 c5 01 75 d4 41 f6 c5 02 74 0f RSP: 0018:ff71570009e07a80 EFLAGS: 00010207 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000200 RDX: ffffffffad8dc7c0 RSI: 0000000024924925 RDI: ff3e27850dea2000 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffffabfce739 R10: ff3e27810cc42400 R11: 0000000000000000 R12: ff3e2781825ef970 R13: 00000000ff3e2785 R14: 000000000000000c R15: 0000000000000001 FS: 00007f5195b51740(0000) GS:ff3e278b12d40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 0000000626d24002 CR4: 0000000000361ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ima_get_action+0x22/0x30 process_measurement+0xb0/0x830 ? page_add_file_rmap+0x15/0x170 ? alloc_set_pte+0x269/0x4c0 ? prep_new_page+0x81/0x140 ? simple_xattr_get+0x75/0xa0 ? selinux_file_open+0x9d/0xf0 ima_file_check+0x64/0x90 path_openat+0x571/0x1720 do_filp_open+0x9b/0x110 ? page_counter_try_charge+0x57/0xc0 ? files_cgroup_alloc_fd+0x38/0x60 ? __alloc_fd+0xd4/0x250 ? do_sys_open+0x1bd/0x250 do_sys_open+0x1bd/0x250 do_syscall_64+0x5d/0x1d0 entry_SYSCALL_64_after_hwframe+0x65/0xca Commit c7423dbdbc9e ("ima: Handle -ESTALE returned by ima_filter_rule_match()") introduced call to ima_lsm_copy_rule within a RCU read-side critical section which contains kmalloc with GFP_KERNEL. This implies a possible sleep and violates limitations of RCU read-side critical sections on non-PREEMPT systems. Sleeping within RCU read-side critical section might cause synchronize_rcu() returning early and break RCU protection, allowing a UAF to happen. The root cause of this issue could be described as follows: | Thread A | Thread B | | |ima_match_policy | | | rcu_read_lock | |ima_lsm_update_rule | | | synchronize_rcu | | | | kmalloc(GFP_KERNEL)| | | sleep | ==> synchronize_rcu returns early | kfree(entry) | | | | entry = entry->next| ==> UAF happens and entry now becomes NULL (or could be anything). | | entry->action | ==> Accessing entry might cause panic. To fix this issue, we are converting all kmalloc that is called within RCU read-side critical section to use GFP_ATOMIC. Fixes: c7423dbdbc9e ("ima: Handle -ESTALE returned by ima_filter_rule_match()") Cc: stable@vger.kernel.org Signed-off-by: GUO Zihua <guozihua@huawei.com> Acked-by: John Johansen <john.johansen@canonical.com> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Reviewed-by: Casey Schaufler <casey@schaufler-ca.com> [PM: fixed missing comment, long lines, !CONFIG_IMA_LSM_RULES case] Signed-off-by: Paul Moore <paul@paul-moore.com>
2024-06-13drm/i915/dp: Add debugfs entry to get the link retrain disabled stateImre Deak
Add a connector debugfs entry showing if link retraining is disabled. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-22-imre.deak@intel.com
2024-06-13drm/i915/dp: Add debugfs entry to force link retrainImre Deak
Add a connector debugfs entry to force retrain an active link. This can be used to test both custom link parameters (previously forced via the force_link_rate/lane_count entries) or link train failure scenarios (previously forced via the force_link_training_failure entry). The entry will autoreset after the link-retrain is complete. v2: Add the entry from intel_dp_link_training.c (Jani) v3: Lock connection_mutex only for the required intel_dp state. (Ville) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-21-imre.deak@intel.com
2024-06-13drm/i915/dp: Add debugfs entry to force link training failureImre Deak
Add a connector debugfs entry to force a failure during the following 1-2 link training. The entry will auto-reset after the specified link training events are complete. v2: Add the entry from intel_dp_link_training.c (Jani) v3: Lock connection_mutex only for the required intel_dp state. (Ville) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-20-imre.deak@intel.com
2024-06-13drm/i915/dp: Add debugfs entries to get the max link rate/lane countImre Deak
Add connector debugfs entries to get the maximum link rate and lane count. v2: Lock connection_mutex only for the required intel_dp state. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-19-imre.deak@intel.com
2024-06-13drm/i915/dp: Add debugfs entries to force the link rate/lane countImre Deak
Add connector debugfs entries to force the link rate/lane count to be used by a link training afterwards. These settings will be clamped to the supported, i.e. the source's and sink's common rate/lane count. After forcing the link rate/lane count reset the link training parameters and for a non-auto setting disable reducing the link parameters via the fallback logic. The former one can be used after testing link training failure scenarios - via debugfs entries added later - to reset the reduced link parameters after the test. v2: - Add the entries from intel_dp_link_training.c (Jani) - Rename the entries to i915_dp_set_link_rate/lane_count. v3: (Ville) - Rename the entries/struct fields to force_link_rate/lane_count. - Lock connection_mutex only for the required intel_dp state. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-18-imre.deak@intel.com
generated by cgit (git 2.34.1) at 2025-09-22 13:00:41 +0000