| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"Misc:
- Restore debugfs behavior of ignoring unknown mount options
- Fix kernel doc for netfs_wait_for_oustanding_io()
- Fix struct statx comment after new addition for this cycle
- Fix a check in find_next_fd()
iomap:
- Fix data zeroing behavior when an extent spans the block that
contains i_size
- Restore i_size increasing in iomap_write_end() for now to avoid
stale data exposure on xfs with a realtime device
Cachefiles:
- Remove unneeded fdtable.h include
- Improve trace output for cachefiles_obj_{get,put}_ondemand_fd()
- Remove requests from the request list to prevent accessing already
freed requests
- Fix UAF when issuing restore command while the daemon is still
alive by adding an additional reference count to requests
- Fix UAF by grabbing a reference during xarray lookup with xa_lock()
held
- Simplify error handling in cachefiles_ondemand_daemon_read()
- Add consistency checks read and open requests to avoid crashes
- Add a spinlock to protect ondemand_id variable which is used to
determine whether an anonymous cachefiles fd has already been
closed
- Make on-demand reads killable allowing to handle broken cachefiles
daemon better
- Flush all requests after the kernel has been marked dead via
CACHEFILES_DEAD to avoid hung-tasks
- Ensure that closed requests are marked as such to avoid reusing
them with a reopen request
- Defer fd_install() until after copy_to_user() succeeded and thereby
get rid of having to use close_fd()
- Ensure that anonymous cachefiles on-demand fds are reused while
they are valid to avoid pinning already freed cookies"
* tag 'vfs-6.10-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: Fix iomap_adjust_read_range for plen calculation
iomap: keep on increasing i_size in iomap_write_end()
cachefiles: remove unneeded include of <linux/fdtable.h>
fs/file: fix the check in find_next_fd()
cachefiles: make on-demand read killable
cachefiles: flush all requests after setting CACHEFILES_DEAD
cachefiles: Set object to close if ondemand_id < 0 in copen
cachefiles: defer exposing anon_fd until after copy_to_user() succeeds
cachefiles: never get a new anonymous fd if ondemand_id is valid
cachefiles: add spin_lock for cachefiles_ondemand_info
cachefiles: add consistency check for copen/cread
cachefiles: remove err_put_fd label in cachefiles_ondemand_daemon_read()
cachefiles: fix slab-use-after-free in cachefiles_ondemand_daemon_read()
cachefiles: fix slab-use-after-free in cachefiles_ondemand_get_fd()
cachefiles: remove requests from xarray during flushing requests
cachefiles: add output string to cachefiles_obj_[get|put]_ondemand_fd
statx: Update offset commentary for struct statx
netfs: fix kernel doc for nets_wait_for_outstanding_io()
debugfs: continue to ignore unknown mount options
|
|
Consider a thermal zone with one passive trip point, a cooling device
with 3 states (0, 1, 2) bound to it, passive polling enabled (nonzero
passive_delay_jiffies) and no regular polling (polling_delay_jiffies
equal to 0) that is managed by the Step-Wise governor. Suppose that
the initial state of the cooling device is 0 and the zone temperature
is below the trip point to start with.
When the trip point is crossed, tz->passive is incremented by the
thermal core and the governor's .manage() callback is invoked. It
sets 'throttle' to 'true' for the trip in question and
get_target_state() returns 1 for the instance corresponding to the
cooling device (say that 'upper' and 'lower' are set to 2 and 0 for
it, respectively), so its state changes to 1.
Passive polling is still active for the zone, so next time the
temperature is updated, the governor's .manage() callback will be
invoked again. If the temperature is still rising, it will change
the state of the cooling device to 2.
Now suppose that next time the zone temperature is updated, it falls
below the trip point, so tz->passive is decremented for the zone (say
it becomes 0 then) and the governor's .manage() callbacks runs.
It finds that the temperature trend for the zone is 'falling' and
'throttle' will be set to 'false' for the trip in question, so the
cooling device's state will be changed to 1. However, because
tz->polling is 0 for the zone, the governor's .manage() callback
may not be invoked again for a long time and the cooling device's
state will not be reset back to 0.
This can happen because commit 042a3d80f118 ("thermal: core: Move
passive polling management to the core") removed passive polling
management from the Step-Wise governor.
Before that change, thermal_zone_trip_update() would bump up
tz->passive when changing the target state for a thermal instance
from "no target" to a specific value and it would drop tz->passive
when changing it back to "no target" which would cause passive
polling to be active for the zone until the governor has reset the
states of all cooling devices. In particular, in the example above
tz->passive would be incremented when changing the state of the
cooling device from 0 to 1 and then it would be still nonzero when
the state of the cooling device was changed from 2 to 1.
To prevent this problem from occurring, restore the passive polling
management in the Step-Wise governor by partially reverting the
commit in question and update the comment in the restored code
to explain its role more clearly.
Fixes: 042a3d80f118 ("thermal: core: Move passive polling management to the core")
Closes: https://lore.kernel.org/linux-pm/ZmVfcEOxmjUHZTSX@hovoldconsulting.com
Reported-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
According to the FF-A spec (Buffer states and ownership), after a
producer has written into a buffer, it is "full" and now owned by the
consumer. The producer won't be able to use that buffer, until the
consumer hands it over with an invocation such as RX_RELEASE.
It is clear in the following paragraph (Transfer of buffer ownership),
that MEM_RETRIEVE_RESP is transferring the ownership from producer (in
our case SPM) to consumer (hypervisor). RX_RELEASE is therefore
mandatory here.
It is less clear though what is happening with MEM_FRAG_TX. But this
invocation, as a response to MEM_FRAG_RX writes into the same hypervisor
RX buffer (see paragraph "Transmission of transaction descriptor in
fragments"). Also this is matching the TF-A implementation where the RX
buffer is marked "full" during a MEM_FRAG_RX.
Release the RX hypervisor buffer in those two cases. This will unblock
later invocations using this buffer which would otherwise fail.
(RETRIEVE_REQ, MEM_FRAG_RX and PARTITION_INFO_GET).
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20240611175317.1220842-1-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Fix missing kmem_cache_destroy() for ioat_sed_cache in
ioat_exit_module().
Noticed via:
```
modprobe ioatdma
rmmod ioatdma
modprobe ioatdma
debugfs: Directory 'ioat_sed_ent' with parent 'slab' already present!
```
Fixes: c0f28ce66ecf ("dmaengine: ioatdma: move all the init routines")
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240514-ioatdma_fixes-v1-1-2776a0913254@yadro.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
dma-channels is a number, not a list. Apply proper constraints on the
actual number.
Fixes: 6eb439dff645 ("dt-bindings: fsl-dma: fsl-edma: add edma3 compatible string")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240521083002.23262-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Kbuild does not support having a source file compiled multiple times
and linked into distinct modules, or built-in and modular at the
same time. For fs-edma, there are two common components that are
linked into the fsl-edma.ko for Arm and PowerPC, plus the mcf-edma.ko
module on Coldfire. This violates the rule for compile-testing:
scripts/Makefile.build:236: drivers/dma/Makefile: fsl-edma-common.o is added to multiple modules: fsl-edma mcf-edma
scripts/Makefile.build:236: drivers/dma/Makefile: fsl-edma-trace.o is added to multiple modules: fsl-edma mcf-edma
I tried splitting out the common parts into a separate modules, but
that adds back the complexity that a cleanup patch removed, and it
gets harder with the addition of the tracepoints.
As a minimal workaround, address it at the Kconfig level, by disallowing
the broken configurations.
Link: https://lore.kernel.org/lkml/20240110232255.1099757-1-arnd@kernel.org/
Fixes: 66aac8ea0a6c ("dmaengine: fsl-edma: clean up EXPORT_SYMBOL_GPL in fsl-edma-common.c")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240528115440.2965975-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
If probing fails we end up with leaking ioatdma_device and each
allocated channel.
Following kmemleak easy to reproduce by injecting an error in
ioat_alloc_chan_resources() when doing ioat_dma_self_test().
unreferenced object 0xffff888014ad5800 (size 1024): [..]
[<ffffffff827692ca>] kmemleak_alloc+0x4a/0x80
[<ffffffff81430600>] kmalloc_trace+0x270/0x2f0
[<ffffffffa000b7d1>] ioat_pci_probe+0xc1/0x1c0 [ioatdma]
[..]
repeated for each ioatdma channel:
unreferenced object 0xffff8880148e5c00 (size 512): [..]
[<ffffffff827692ca>] kmemleak_alloc+0x4a/0x80
[<ffffffff81430600>] kmalloc_trace+0x270/0x2f0
[<ffffffffa0009641>] ioat_enumerate_channels+0x101/0x2d0 [ioatdma]
[<ffffffffa000b266>] ioat3_dma_probe+0x4d6/0x970 [ioatdma]
[<ffffffffa000b891>] ioat_pci_probe+0x181/0x1c0 [ioatdma]
[..]
Fixes: bf453a0a18b2 ("dmaengine: ioat: Support in-use unbind")
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240528-ioatdma-fixes-v2-3-a9f2fbe26ab1@yadro.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Make sure we are disabling interrupts and destroying DMA pool if
pcie_capability_read/write_word() call failed.
Fixes: 511deae0261c ("dmaengine: ioatdma: disable relaxed ordering for ioatdma")
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240528-ioatdma-fixes-v2-2-a9f2fbe26ab1@yadro.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Fix leaking ioatdma_device if I/OAT version is less than IOAT_VER_3_0.
Fixes: bf453a0a18b2 ("dmaengine: ioat: Support in-use unbind")
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240528-ioatdma-fixes-v2-1-a9f2fbe26ab1@yadro.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The of_k3_udma_glue_parse_chn_by_id() helper function erroneously
invokes "of_node_put()" on the "udmax_np" device-node passed to it,
without having incremented its reference count at any point. Fix it.
Fixes: 81a1f90f20af ("dmaengine: ti: k3-udma-glue: Add function to parse channel by ID")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Acked-by: Peter Ujfalusi@gmail.com
Link: https://lore.kernel.org/r/20240602013319.2975894-1-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
'ip6 dscp set $v' in an nftables outpute route chain has no effect.
While nftables does detect the dscp change and calls the reroute hook.
But ip6_route_me_harder never sets the dscp/flowlabel:
flowlabel/dsfield routing rules are ignored and no reroute takes place.
Thanks to Yi Chen for an excellent reproducer script that I used
to validate this change.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Yi Chen <yiche@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Lion Ackermann reported that there is a race condition between namespace cleanup
in ipset and the garbage collection of the list:set type. The namespace
cleanup can destroy the list:set type of sets while the gc of the set type is
waiting to run in rcu cleanup. The latter uses data from the destroyed set which
thus leads use after free. The patch contains the following parts:
- When destroying all sets, first remove the garbage collectors, then wait
if needed and then destroy the sets.
- Fix the badly ordered "wait then remove gc" for the destroy a single set
case.
- Fix the missing rcu locking in the list:set type in the userspace test
case.
- Use proper RCU list handlings in the list:set type.
The patch depends on c1193d9bbbd3 (netfilter: ipset: Add list flush to cancel_gc).
Fixes: 97f7cf1cd80e (netfilter: ipset: fix performance regression in swap operation)
Reported-by: Lion Ackermann <nnamrec@gmail.com>
Tested-by: Lion Ackermann <nnamrec@gmail.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Check for mandatory netlink attributes in payload and meta expression
when used embedded from the inner expression, otherwise NULL pointer
dereference is possible from userspace.
Fixes: a150d122b6bd ("netfilter: nft_meta: add inner match support")
Fixes: 3a07327d10a0 ("netfilter: nft_inner: support for inner tunnel header matching")
Signed-off-by: Davide Ornaghi <d.ornaghi97@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Set driver name to "HDMI". This simplifies the code and gets rid of
the following error messages:
ASoC: driver name too long 'HDMI 58040000.encoder' -> 'HDMI_58040000_e'
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20240610125847.773394-1-primoz.fiser@norik.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The minimum period size was enforced to 64 as older devices integrating
McASP with EDMA used an internal FIFO of 64 samples.
With UDMA based platforms this internal McASP FIFO is optional, as the
DMA engine internally does some buffering which is already accounted for
when registering the platform. So we should read the actual FIFO
configuration (txnumevt/rxnumevt) instead of hardcoding frames.min to
64.
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240611-asoc_next-v3-2-fcfd84b12164@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Sometimes the stream may be stopped due to XRUN events, in which case
the userspace can call snd_pcm_drop() and snd_pcm_prepare() to stop and
start the stream again.
In these cases, we must wait for the DMA channel to synchronize before
marking the stream as prepared for playback, as the DMA channel gets
stopped by drop() without any synchronization. Make sure the ALSA core
synchronizes the DMA channel by adding a sync_stop() hook.
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240611-asoc_next-v3-1-fcfd84b12164@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use list_for_each_entry_safe() to allow iterating through the list and
deleting the entry in the iteration process. The descriptor is freed via
idxd_desc_complete() and there's a slight chance may cause issue for
the list iterator when the descriptor is reused by another thread
without it being deleted from the list.
Fixes: 16e19e11228b ("dmaengine: idxd: Fix list corruption in description completion")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20240603012444.11902-1-lirongqing@baidu.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
fix the following errors by using string format specifier and an empty
parameter:
seccomp_benchmark.c:197:24: warning: zero-length gnu_printf format
string [-Wformat-zero-length]
197 | ksft_print_msg("");
| ^~
seccomp_benchmark.c:202:24: warning: zero-length gnu_printf format
string [-Wformat-zero-length]
202 | ksft_print_msg("");
| ^~
seccomp_benchmark.c:204:24: warning: zero-length gnu_printf format
string [-Wformat-zero-length]
204 | ksft_print_msg("");
| ^~
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312260235.Uj5ug8K9-lkp@intel.com/
Suggested-by: Kees Cook <kees@kernel.org>
Signed-off-by: Amer Al Shanawany <amer.shanawany@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Fix the following warnings by adding return check and error messages.
statmount_test.c: In function ‘cleanup_namespace’:
statmount_test.c:128:9: warning: ignoring return value of ‘fchdir’
declared with attribute ‘warn_unused_result’ [-Wunused-result]
128 | fchdir(orig_root);
| ^~~~~~~~~~~~~~~~~
statmount_test.c:129:9: warning: ignoring return value of ‘chroot’
declared with attribute ‘warn_unused_result’ [-Wunused-result]
129 | chroot(".");
| ^~~~~~~~~~~
Signed-off-by: Amer Al Shanawany <amer.shanawany@gmail.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This WA needs to be applied to graphics GT when the media version
is 2000. Currently, media version 2000 is always paired with
graphics version 2004 which will result in writing same register
with same bits twice. We can't add optional rule in rtp
framework and also writing same register with same bits gives
warning.
Currently, media version 2000 is always paired with graphics version
2004, so just checking the latter is sufficient.
V2(Lucas):
- Add more detail in commit message
- Improve code comment to follow guideline
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2016
Fixes: 131328aa5699 ("drm/xe/xe2lpm: Add permanent Wa_14020756599")
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607122528.1048610-1-tejas.upadhyay@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Since physical and virtual kernel address spaces are uncoupled
the kernel image is not mapped using large segment pages anymore,
which is a regression.
Put the kernel image at the same large segment page offset in
physical memory as in virtual memory. Such approach preserves
the existing number of bits of entropy used for randomization
of the kernel location in virtual memory when KASLR is on.
As result, the kernel is mapped using large segment pages.
Fixes: c98d2ecae08f ("s390/mm: Uncouple physical vs virtual address spaces")
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Do not allow creation of large pages against physical addresses,
which itself are not aligned on the correct boundary. Failure to
do so might lead to referencing wrong memory as result of the way
DAT works.
Fixes: c98d2ecae08f ("s390/mm: Uncouple physical vs virtual address spaces")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The WA should be extended to cover VDBOX engine. We found that
28-channels 1080p VP9 encoding may hit this issue.
v3: update the WA number and explain the reason why
this workaround is needed
v2: add WA number
v1: initial version
Signed-off-by: Angus Chen <angus.chen@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240426073638.45775-1-angus.chen@intel.com
|
|
It was discovered that some device have CBR address set to 0 causing
kernel panic when arch_sync_dma_for_cpu_all is called.
This was notice in situation where the system is booted from TP1 and
BMIPS_GET_CBR() returns 0 instead of a valid address and
!!(read_c0_brcm_cmt_local() & (1 << 31)); not failing.
The current check whether RAC flush should be disabled or not are not
enough hence lets check if CBR is a valid address or not.
Fixes: ab327f8acdf8 ("mips: bmips: BCM6358: disable RAC flush for TP1")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Commit 90c2d2eb7ab5 ("MIPS: pci: lantiq: switch to using gpiod API") not
only switched to the gpiod API, but also inverted / changed the polarity
of the GPIO.
According to the PCI specification, the RST# pin is an active-low
signal. However, most of the device trees that have been widely used for
a long time (mainly in the openWrt project) define this GPIO as
active-high and the old driver code inverted the signal internally.
Apparently there are actually boards where the reset gpio must be
operated inverted. For this reason, we cannot use the GPIOD_OUT_LOW/HIGH
flag for initialization. Instead, we must explicitly set the gpio to
value 1 in order to take into account any "GPIO_ACTIVE_LOW" flag that
may have been set.
In order to remain compatible with all these existing device trees, we
should therefore keep the logic as it was before the commit.
Fixes: 90c2d2eb7ab5 ("MIPS: pci: lantiq: switch to using gpiod API")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
read_config_dword() contains strange condition checking ret for a
number of values. The ret variable, however, is always zero because
config_access() never returns anything else. Thus, the retry is always
taken until number of tries is exceeded.
The code looks like it wants to check *val instead of ret to see if the
read gave an error response.
Fixes: 73b4390fb234 ("[MIPS] Routerboard 532: Support for base system")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>:
Originally reported here:
https://github.com/thesofproject/avs-topology-xml/issues/22#issuecomment-2127892605
There is various level of failure there, first of all when topology
loads routes, it points directly into FW file, but it may be freed after
topology load. After fixing the above, when avs driver parses topology
it should allocate its own memory, as target strings can be shorter than
needed. Also clean up soc_tplg_dapm_graph_elems_load() a bit.
|
|
We have kernel-doc for all HXG message types but Fast Request.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610120411.1768-3-michal.wajdeczko@intel.com
|
|
Those were copy-pasted from i915 code and never used in Xe driver.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610120411.1768-2-michal.wajdeczko@intel.com
|
|
When checking vblank length used wake time is aux less wake time for eDP
Panel Replay (vblank length is not checked for DP2.0 Panel Replay).
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607134917.1327574-14-jouni.hogander@intel.com
|
|
As Lunarlake doesn't have block count configuration vblank should be
checked against IO buffer wake time.
Bspec: 68920
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607134917.1327574-13-jouni.hogander@intel.com
|
|
If the card doesn't have display hardware, hpd_work and hpd_lock are
left uninitialized which causes BUG when attempting to schedule hpd_work
on runtime PM resume.
Fix it by adding headless flag to DRM and skip any hpd if it's set.
Fixes: ae1aadb1eb8d ("nouveau: don't fail driver load if no display hw present.")
Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/337
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607221032.25918-1-anarsoul@gmail.com
|
|
SU SDP scanline indication should be taken into account when checking
vblank length. In Bspec we have:
PSR2_CTL[ SU SDP scanline indication ] = 0: (TRANS_VBLANK Vertical Blank
End- TRANS_VBLANK Vertical Blank Start) > PSR2_CTL Block Count Number value
in lines
PSR2_CTL[ SU SDP scanline indication ] = 1: (TRANS_VBLANK Vertical Blank
End- TRANS_VBLANK Vertical Blank Start- 1) > PSR2_CTL Block Count Number
value in lines
Bspec: 49274
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607134917.1327574-12-jouni.hogander@intel.com
|
|
We are about to add more complexity to vblank length check. It makes sense
to move it to separate function for sake of clarity.
v2: change name to wake_lines_fit_into_vblank
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607134917.1327574-11-jouni.hogander@intel.com
|
|
Currently Panel Replay status printout is printing frame lock status. It
should print Panel Replay status instead. Panel Replay status register
field follows PSR status register field. Use existing PSR code for that.
Fixes: ef75c25e8fed ("drm/i915/panelreplay: Debugfs support for panel replay")
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607134917.1327574-10-jouni.hogander@intel.com
|
|
Early Transport is possible and in our HW mandatory on eDP Panel
Replay. Add parameter to intel_psr2_config_et_valid to differentiate
validity check for Panel Replay.
v2: fix intel_dp->psr_dpcd[0] check
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607134917.1327574-9-jouni.hogander@intel.com
|
|
Convert intel_alpm_aux_wake_supported and
intel_alpm_aux_less_wake_supported as non-static. Use them in intel_psr.c
instead of local variables.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607134917.1327574-8-jouni.hogander@intel.com
|
|
Current intel_psr_enable_sink is a mess due to partly reusing PSR bit
definitions for Panel Replay. Even thought PSR and Panel Replay enable
registers do have common bits they still have also different bits and same
bits with different meaning. For sake of clarity split enabling sink to PSR
and Panel Replay specific parts.
Also fix issue caused by using psr->panel_replay_enabled to early.
Fixes: 88ae6c65ecdb ("drm/i915/psr: Unify panel replay enable/disable sink")
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607134917.1327574-7-jouni.hogander@intel.com
|
|
Add missing Panel Replay Enable SU Region ET bit defined in DP2.1
specification.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607134917.1327574-6-jouni.hogander@intel.com
|
|
Panel Replay is not enabled if there are no active planes. Do not compare
it on pipe comparison. Otherwise we get pipe mismatch.
Fixes: ac9ef327327b ("drm/i915/psr: Panel replay has to be enabled before link training")
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607134917.1327574-5-jouni.hogander@intel.com
|
|
Currently intel_dp_vsc_sdp_unpack is not taking into account Panel Replay
vsc sdp. Fix this by adding vsc sdp revision 0x6 and length 0x10 into
intel_dp_vsc_sdp_unpack
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607134917.1327574-4-jouni.hogander@intel.com
|
|
Currently AUX Less Wake lines are not written into ALPM_CTL. Fix this.
Fixes: 1ccbf135862b ("drm/i915/psr: Enable ALPM on source side for eDP Panel replay")
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607134917.1327574-3-jouni.hogander@intel.com
|
|
We want to have own variables for fast wake lines and aux less wake
time. It might be needed to choose if we can enable Panel Replay Selective
Update or PSR2.
Also currently aux less wake time is overwritten by calculated fast wake
time.
v2:use aux less wake time in intel_alpm_lobf_compute_config
Fixes: da6a9836ac09 ("drm/i915/psr: Calculate aux less wake time")
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607134917.1327574-2-jouni.hogander@intel.com
|
|
Now that most panels have been updated not to track/double-check their
prepared/enabled state update the TODO with next steps.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604172305.v3.23.I104cdece7324b0c365e552a17f9883414ffaea01@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604172305.v3.23.I104cdece7324b0c365e552a17f9883414ffaea01@changeid
|
|
It's the responsibility of a correctly written DRM modeset driver to
call drm_atomic_helper_shutdown() at shutdown time and that should be
disabling / unpreparing the panel if needed. Panel drivers shouldn't
be calling these functions themselves.
A recent effort was made to fix as many DRM modeset drivers as
possible [1] [2] [3] and most drivers are fixed now.
A grep through mainline for compatible strings used by this driver
indicates that it is used by IMX boards. The IMX driver appears to be
correctly calling drm_atomic_helper_shutdown() so we can remove the
calls.
[1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org
[2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org
[3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org
Cc: Robert Chiras <robert.chiras@nxp.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604172305.v3.22.Id14188f1a8af7d524751c27c343a5b583ff5361f@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604172305.v3.22.Id14188f1a8af7d524751c27c343a5b583ff5361f@changeid
|
|
As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.
The conversion of the rm67191 panel driver follows many of the other
panel drivers but has a few differences that need to be called out.
Like in commit 1e0465eb16a4 ("drm/panel: otm8009a: Don't double check
prepared/enabled"), this panel also uses the "prepared" flag to
prevent the backlight functions from running when the panel is powered
off. This is probably not the safest thing to do but the old behavior
was preserved. See the discussion in the otm8009a patch. Because of
this, I've left the driver tracking "prepared" but removed its
tracking of "enabled".
NOTE: as part of this, transition the panel's direct calls to its
disable/unprepare functions in shutdown to call through DRM panel.
Cc: Robert Chiras <robert.chiras@nxp.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604172305.v3.21.I20f82e9dd1597a14ae37a64c6b8275add60fbdb1@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604172305.v3.21.I20f82e9dd1597a14ae37a64c6b8275add60fbdb1@changeid
|
|
It's the responsibility of a correctly written DRM modeset driver to
call drm_atomic_helper_shutdown() at shutdown time and that should be
disabling / unpreparing the panel if needed. Panel drivers shouldn't
be calling these functions themselves.
A recent effort was made to fix as many DRM modeset drivers as
possible [1] [2] [3] and most drivers are fixed now.
A grep through mainline for compatible strings used by this driver
indicates that it is used by Qualcomm boards. The Qualcomm driver
appears to be correctly calling drm_atomic_helper_shutdown() so we can
remove the calls.
[1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org
[2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org
[3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org
Cc: Werner Johansson <werner.johansson@sonymobile.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604172305.v3.20.I89ee53f7fc2f0806cab318128e5fa927990d830f@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604172305.v3.20.I89ee53f7fc2f0806cab318128e5fa927990d830f@changeid
|
|
As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.
Cc: Werner Johansson <werner.johansson@sonymobile.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604172305.v3.19.I56849dbe7c906f0cff076dc5286fd05c7e3e9c18@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604172305.v3.19.I56849dbe7c906f0cff076dc5286fd05c7e3e9c18@changeid
|
|
It's the responsibility of a correctly written DRM modeset driver to
call drm_atomic_helper_shutdown() at shutdown time and that should be
disabling / unpreparing the panel if needed. Panel drivers shouldn't
be calling these functions themselves.
A recent effort was made to fix as many DRM modeset drivers as
possible [1] [2] [3] and most drivers are fixed now.
A grep through mainline for compatible strings used by this driver
indicates that it is used by Tegra boards. The Tegra driver appears to
be correctly calling drm_atomic_helper_shutdown() so we can remove the
calls.
[1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org
[2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org
[3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org
Cc: Thierry Reding <treding@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604172305.v3.18.I6a87fce1ee027c96f71c7adf74248b865f50b336@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604172305.v3.18.I6a87fce1ee027c96f71c7adf74248b865f50b336@changeid
|
