summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-06-14drm/amd/display: Remove unreachable checkIvan Lipski
[WHY] Coverity analysis flagged this code as DEADCODE since the condition and return in the outer loop are never reached. All operations with the 'dwb_pipe' variable happen in the inner loop, that already contains the same check with the 'MAX_DWB_PIPES'. The later check condition cannot occur before the check condition in the inner loop, thus the later condition is unreacable. [HOW] Remove the unreachable condition. Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Ivan Lipski <ivlipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Remove redundant if conditionsIvan Lipski
[WHY] Coverity analysis flagged the two if conditions in dcn30_dpp.c and dcn401_dpp.c as DEADCODE since they are never true, since the variable 'program_prealpha_dealpha' is initialized at 0 and never chagnes. [HOW] Removed the variable 'program_prealpha_dealpha' and the if conditions. Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Ivan Lipski <ivlipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: add odm_slice_rect parameter in spl_inWenjing Liu
[why] OPP input rect aka odm slice rect is a hardware dependent parameter that can't be determined by SPL software logic. Therefore we need to explicitly pass odm slice rect in. So ODM slice rect calculation is moved out of SPL. [how] add odm_slice_rect parameter in spl_in Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: use even ODM slice width for two pixels per containerWenjing Liu
[why] When optc uses two pixel per container, each ODM slice width must be an even number. [how] If ODM slice width is odd number increase it by 1. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Fix Replay Desync Error TestDennis Chan
When PHY power off, the DP_SEC_CNTL cannot be configured and cause disable Adaptive sync SDP failed. Regarding the issue, the driver will disabled AS-SDP in replay state machine. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Dennis Chan <dennis.chan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Replay + IPS + ABM in Full Screen VPBChunTao Tso
[Why] Because ABM will wait VStart to start getting histogram data, it will cause we can't enter IPS while full screnn video playing. [How] Modify the panel refresh rate to the maximun multiple of current refresh rate Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: ChunTao Tso <ChunTao.Tso@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Expand supported Replay residency modeLeon Huang
[Why] Dmub provides several Replay residency calculation methods, but current interface only supports either ALPM or PHY mode [How] Modify the interface for supporting different types of Replay residency calculation. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Leon Huang <Leon.Huang1@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Replay low hzChunTao Tso
[Why] The original coasting vtotal is 2 bytes, and it need to be amended to 4 bytes because low hz case. [How] Amend coasting vtotal from 2 bytes to 4 bytes. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: ChunTao Tso <ChunTao.Tso@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Use TPS3 for ALPM on Specific Panelpochchan
For some specific panel, it need to use TPS3 rather than use TP2 in ALPM when DSC is enabled. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: pochchan <pochchan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Wake DMCUB before sending a command for replay featureNicholas Kazlauskas
[Why] We can hang in place trying to send commands when the DMCUB isn't powered on. [How] For functions that execute within a DC context or DC lock we can wrap the direct calls to dm_execute_dmub_cmd/list with code that exits idle power optimizations and reallows once we're done with the command submission on success. For DM direct submissions the DM will need to manage the enter/exit sequencing manually. We cannot invoke a DMCUB command directly within the DM execution helper or we can deadlock. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Don't use fsleep for PSR exit waits on dmub replayNicholas Kazlauskas
[Why] These functions can be called from high IRQ levels and the OS will hang if it tries to use a usleep_highres or a msleep. [How] Replace the flseep with a udelay for dmub_replay_enable. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: revert "take runtime pm reference when we attach a buffer" v2Christian König
This reverts commit b8c415e3bf98 ("drm/amdgpu: take runtime pm reference when we attach a buffer") and commit 425285d39afd ("drm/amdgpu: add amdgpu runpm usage trace for separate funcs"). Taking a runtime pm reference for DMA-buf is actually completely unnecessary and even dangerous. The problem is that calling pm_runtime_get_sync() from the DMA-buf callbacks is illegal because we have the reservation locked here which is also taken during resume. So this would deadlock. When the buffer is in GTT it is still accessible even when the GPU is powered down and when it is in VRAM the buffer gets migrated to GTT before powering down. The only use case which would make it mandatory to keep the runtime pm reference would be if we pin the buffer into VRAM, and that's not something we currently do. v2: improve the commit message Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> CC: stable@vger.kernel.org
2024-06-14drm/amd/display: Use dc wake for get the replay stateRodrigo Siqueira
Use dc_wake_and_execute_gpint with DM_DMUB_WAIT_TYPE_WAIT_WITH_REPLY to get the replay state. Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: refine imu firmware loadingYang Wang
refine imu firmware loading Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: refine pmfw/smu firmware loadingYang Wang
refine pmfw/smu firmware loading Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: refine gmc firmware loadingYang Wang
refine gmc firmware loading Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: refine vpe firmware loadingYang Wang
refine vpe firmware loading Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: refine vcn firmware loadingYang Wang
refine vcn firmware loading Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: move aca/mca init functions into ras_init() stageYang Wang
adjust the function position to better match aca/mca fini code in ras_fini(). Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: fix overflowed constant warning in mmhub_set_clockgating()Bob Zhou
To fix potential overflowed constant warning, modify the variables to u32 for getting the return value of RREG32_SOC15(). Signed-off-by: Bob Zhou <bob.zhou@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: Indicate CU havest info to CPHarish Kasiviswanathan
To achieve full occupancy CP hardware needs to know if CUs in SE are symmetrically or asymmetrically harvested v2: Reset is_symmetric_cus for each loop Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: Skip coredump during resets for debugLijo Lazar
Skip scheduling coredump when gpu reset is intentionally triggered through debugfs. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: refine sdma firmware loadingYang Wang
refine sdma firmware loading Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: refine psp firmware loadingYang Wang
refine psp firmware loading Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: add lock in kfd_process_dequeue_from_deviceYunxiang Li
We need to take the reset domain lock before talking to MES. While in this case we can take the lock inside the mes helper. We can't do so for most other mes helpers since they are used during reset. So for consistency sake we add the lock here. Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: refine mes firmware loadingYang Wang
v1: refine mes firmware loading v2: use dev_info instead of DRM_INFO Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: Add missing locking for MES API callsMukul Joshi
Add missing locking at a few places when calling MES APIs to ensure exclusive access to MES queue. Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Set default brightness according to ACPIMario Limonciello
Currently, amdgpu will always set up the brightness at 100% when it loads. However this is jarring when the BIOS has it previously programmed to a much lower value. The ACPI ATIF method includes two members for "ac_level" and "dc_level". These represent the default values that should be used if the system is brought up in AC and DC respectively. Use these values to set up the default brightness when the backlight device is registered. v2: squash in ACPI fix Reviewed-by: Leo Li <sunpeng.li@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: drop some kernel messages in VCN codeDavid (Ming Qiang) Wu
Similar to commit 813e7d4cd05e where some kernel log messages are dropped. With this commit, more log messages in older version of VCN/JPEG code are dropped. Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14Revert "drm/amd/display: Add NULL check for 'afb' before dereferencing in ↵Ivan Lipski
amdgpu_dm_plane_handle_cursor_update" [WHY] This patch is a dupplicate implementation of 14bcf29b, which we are reverting due to a regression with kms_plane_cursor IGT tests. This reverts commit 38e6f715b02b572f74677eb2f29d3b4bc6f1ddff. Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Tested-by: George Zhang <George.zhang@amd.com> Signed-off-by: Ivan Lipski <ivlipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14Revert "drm/amd/display: Add null check for 'afb' in amdgpu_dm_update_cursor"Ivan Lipski
[WHY] This commit introduced a regression with kms_plane_cursor IGT tests, causing AMD Asics to fail these tests. This reverts commit ce66ffd9813c8bd73e21b96d6476e5fb32b727c7. Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Tested-by: George Zhang <George.zhang@amd.com> Signed-off-by: Ivan Lipski <ivlipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: refine gpu_info firmware loadingYang Wang
refine gpu_info firmware loading Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: prevent register access while in IPSHamza Mahfooz
We can't read/write to DCN registers while in IPS. Since, that can cause the system to hang. So, before proceeding with the access in that scenario, force the system out of IPS. Cc: stable@vger.kernel.org # 6.6+ Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: enhance amdgpu_ucode_request() function flexibilityYang Wang
v1: Adding formatting string feature to improve function flexibility. v2: modify macro name to ADMGPU_UCODE_MAX_NAME. Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: fix the overflowed constant warning for RREG32_SOC15()Bob Zhou
To fix potential overflowed constant warning reported by Coverity, modify the variables to uint32_t. Signed-off-by: Bob Zhou <bob.zhou@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: add lock in amdgpu_gart_invalidate_tlbYunxiang Li
We need to take the reset domain lock before flush hdp. We can't put the lock inside amdgpu_device_flush_hdp itself because it is used during reset where we already take the write side lock. Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: fix locking scope when flushing tlbYunxiang Li
Which method is used to flush tlb does not depend on whether a reset is in progress or not. We should skip flush altogether if the GPU will get reset. So put both path under reset_domain read lock. Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> CC: stable@vger.kernel.org
2024-06-14drm/amdgpu: call flush_gpu_tlb directly in gfxhub enableYunxiang Li
Here since we are in reset and takes the reset_domain write side lock already. We can't use the flush tlb helper which tries to take the read side. Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: use helper in amdgpu_gart_unbindYunxiang Li
When amdgpu_gart_invalidate_tlb helper is introduced this part was left out of the conversion. Avoid the code duplication here. Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: remove tlb flush in amdgpu_gtt_mgr_recoverYunxiang Li
At this point the gart is not set up, there's no point to invalidate tlb here and it could even be harmful. Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu/kfd: remove is_hws_hang and is_resettingYunxiang Li
is_hws_hang and is_resetting serves pretty much the same purpose and they all duplicates the work of the reset_domain lock, just check that directly instead. This also eliminate a few bugs listed below and get rid of dqm->ops.pre_reset. kfd_hws_hang did not need to avoid scheduling another reset. If the on-going reset decided to skip GPU reset we have a bad time, otherwise the extra reset will get cancelled anyway. remove_queue_mes forgot to check is_resetting flag compared to the pre-MES path unmap_queue_cpsch, so it did not block hw access during reset correctly. Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: fix sriov host flr handlerYunxiang Li
We send back the ready to reset message before we stop anything. This is wrong. Move it to when we are actually ready for the FLR to happen. In the current state since we take tens of seconds to stop everything, it is very likely that host would give up waiting and reset the GPU before we send ready, so it would be the same as before. But this gets rid of the hack with reset_domain locking and also let us tell how slow ready to reset actually is from the host. The ready to reset speed can be improved later. Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: add skip_hw_access checks for sriovYunxiang Li
Accessing registers via host is missing the check for skip_hw_access and the lockdep check that comes with it. Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: add reset source in various casesEric Huang
To fullfill the reset event description. Suggested-by: Lijo Lazar <Lijo.Lazar@amd.com> Signed-off-by: Eric Huang <jinhuieric.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: fix NULL pointer in amdgpu_reset_get_descEric Huang
amdgpu_job_ring may return NULL, which causes kernel NULL pointer error, using another way to print ring name instead of ring->name. Suggested-by: Lijo Lazar <Lijo.Lazar@amd.com> Signed-off-by: Eric Huang <jinhuieric.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: dc 3.2.287Aric Cyr
This version brings the following changes: - Add sequential ONO sequencing for DCN35 - Add new GPINT command definitions - reduce ODM slice count to initial new dc state only when needed - Enable copying of bounding box data from VBIOS DMUB - Guard reading 3DLUT registers for dcn32/dcn35 Reviewed-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Fix DSC slice and delay calculationsSung Joon Kim
[why] There are other factors that determine the number of DSC slices. The slices should not be determined in DML but retrieve the value calculated from driver. [how] Update the logic to determine DSC slice. Make DSCDelay per display pipe. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Increase MAX_LINKS by 2Alex Hung
Two additional virtual links are created and thus increasing size for dc->links by two. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Guard reading 3DLUT registers for dcn32/dcn35Nicholas Kazlauskas
[Why] 3DLUT is not part of the DPP on DCN32/DCN35 ASIC and these registers now exist in MCM state. [How] Add guards when reading DPP state based on whether the register has a valid offset. Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Various DML2 fixes for FAMS2Dillon Varone
- Ensure SubVP stream settings match ODM policy - Fix MALL size calculations when DCC is enabled - Fail if any stream fails DRR policy check Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-13 03:14:16 +0000