summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-04regulator: stm32-vrefbuf: fix a possible overshoot when re-enablingFabrice Gasnier
There maybe an overshoot, when disabling, then re-enabling vrefbuf too quickly. VREFBUF is used by ADC/DAC on some boards. When re-enabling too quickly, an overshoot on the reference voltage make the conversions inaccurate for a short period of time. - Don't put the VREFBUF in HiZ when disabling, to force an active discharge. - Enforce a 1ms OFF/ON delay Fixes: 0cdbf481e927 ("regulator: Add support for stm32-vrefbuf") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Message-Id: <1583312132-20932-1-git-send-email-fabrice.gasnier@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04drm: kirin: Revert "Fix for hikey620 display offset problem"John Stultz
This reverts commit ff57c6513820efe945b61863cf4a51b79f18b592. With the commit ff57c6513820 ("drm: kirin: Fix for hikey620 display offset problem") we added support for handling LDI overflows by resetting the hardware. However, its been observed that when we do hit the LDI overflow condition, the irq seems to be screaming, and we do nothing but stream: [drm:ade_irq_handler [kirin_drm]] *ERROR* LDI underflow! over and over to the screen I've tried a few appraoches to avoid this, but none has yet been successful and the cure here is worse then the original disease, so revert this for now. Cc: Xinliang Liu <xinliang.liu@linaro.org> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Fixes: ff57c6513820 ("drm: kirin: Fix for hikey620 display offset problem") Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Xinliang Liu <xinliang.liu@linaro.org> Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200303163228.52741-1-john.stultz@linaro.org
2020-03-04ASoC: stm32: sai: manage rebind issueOlivier Moysan
The commit e894efef9ac7 ("ASoC: core: add support to card rebind") allows to rebind the sound card after a rebind of one of its component. With this commit, the sound card is actually rebound, but may be no more functional. The following problems have been seen with STM32 SAI driver. 1) DMA channel is not requested: With the sound card rebind the simplified call sequence is: stm32_sai_sub_probe snd_soc_register_component snd_soc_try_rebind_card snd_soc_instantiate_card devm_snd_dmaengine_pcm_register The problem occurs because the pcm must be registered, before snd_soc_instantiate_card() is called. Modify SAI driver, to change the call sequence as follows: stm32_sai_sub_probe devm_snd_dmaengine_pcm_register snd_soc_register_component snd_soc_try_rebind_card 2) DMA channel is not released: dma_release_channel() is not called when devm_dmaengine_pcm_release() is executed. This occurs because SND_DMAENGINE_PCM_DRV_NAME component, has already been released through devm_component_release(). devm_dmaengine_pcm_release() should be called before devm_component_release() to avoid this problem. Call snd_dmaengine_pcm_unregister() and snd_soc_unregister_component() explicitly from SAI driver, to have the right sequence. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Message-Id: <20200304102406.8093-1-olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04drm/i915/gt: Drop the timeline->mutex as we wait for retirementChris Wilson
As we have pinned the timeline (using tl->active_count), we can safely drop the tl->mutex as we wait for what we believe to be the final request on that timeline. This is useful for ensuring that we do not block the engine heartbeat by hogging the kernel_context's timeline on a dead GPU. References: https://gitlab.freedesktop.org/drm/intel/issues/1364 Fixes: 058179e72e09 ("drm/i915/gt: Replace hangcheck by heartbeats") Fixes: f33a8a51602c ("drm/i915: Merge wait_for_timelines with retire_request") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200303140009.1494819-1-chris@chris-wilson.co.uk (cherry picked from commit 82126e596d8519baac416aee83cad938f1d23cf8) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-03-04drm/i915/perf: Reintroduce wait on OA configuration completionChris Wilson
We still need to wait for the initial OA configuration to happen before we enable OA report writes to the OA buffer. Reported-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: 15d0ace1f876 ("drm/i915/perf: execute OA configuration from command stream") Closes: https://gitlab.freedesktop.org/drm/intel/issues/1356 Testcase: igt/perf/stream-open-close Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200302085812.4172450-7-chris@chris-wilson.co.uk (cherry picked from commit 4b4e973d5eb89244b67d3223b60f752d0479f253) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-03-04s390/pci: Fix unexpected write combine on resourceNiklas Schnelle
In the initial MIO support introduced in commit 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions") zpci_map_resource() and zpci_setup_resources() default to using the mio_wb address as the resource's start address. This means users of the mapping, which includes most drivers, will get write combining on PCI Stores. This may lead to problems when drivers expect write through behavior when not using an explicit ioremap_wc(). Cc: stable@vger.kernel.org Fixes: 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions") Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-04s390/mm: fix panic in gup_fast on large pudGerald Schaefer
On s390 there currently is no implementation of pud_write(). That was ok as long as we had our own implementation of get_user_pages_fast() which checked for pud protection by testing the bit directly w/o using pud_write(). The other callers of pud_write() are not reachable on s390. After commit 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code") we use the generic get_user_pages_fast(), which does call pud_write() in pud_access_permitted() for FOLL_WRITE access on a large pud. Without an s390 specific pud_write(), the generic version is called, which contains a BUG() statement to remind us that we don't have a proper implementation. This results in a kernel panic. Fix this by providing an implementation of pud_write(). Cc: <stable@vger.kernel.org> # 5.2+ Fixes: 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code") Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-03Merge tag '5.6-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: "Five small cifs/smb3 fixes, two for stable (one for a reconnect problem and the other fixes a use case when renaming an open file)" * tag '5.6-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: Use #define in cifs_dbg cifs: fix rename() by ensuring source handle opened with DELETE bit cifs: add missing mount option to /proc/mounts cifs: fix potential mismatch of UNC paths cifs: don't leak -EAGAIN for stat() during reconnect
2020-03-03dt-bindings: mfd: Fix typo in file name of twl-familly.txtJonathan Neuschäfer
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-03dt-bindings: mfd: tps65910: Improve grammarJonathan Neuschäfer
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-03dt-bindings: mfd: zii,rave-sp: Fix a typo ("onborad")Jonathan Neuschäfer
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-03drm/sun4i: Fix DE2 VI layer format supportJernej Skrabec
DE2 VI layer doesn't support blending which means alpha channel is ignored. Replace all formats with alpha with "don't care" (X) channel. Fixes: 7480ba4d7571 ("drm/sun4i: Add support for DE2 VI planes") Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200224173901.174016-4-jernej.skrabec@siol.net
2020-03-03drm/sun4i: Add separate DE3 VI layer formatsJernej Skrabec
DE3 VI layers support alpha blending, but DE2 VI layers do not. Additionally, DE3 VI layers support 10-bit RGB and YUV formats. Make a separate list for DE3. Fixes: c50519e6db4d ("drm/sun4i: Add basic support for DE3") Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200224173901.174016-3-jernej.skrabec@siol.net
2020-03-03drm/sun4i: de2/de3: Remove unsupported VI layer formatsJernej Skrabec
YUV444 and YVU444 are planar formats, but HW format RGB888 is packed. This means that those two mappings were never correct. Remove them. Fixes: 60a3dcf96aa8 ("drm/sun4i: Add DE2 definitions for YUV formats") Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200224173901.174016-2-jernej.skrabec@siol.net
2020-03-03hwmon: (adt7462) Fix an error return in ADT7462_REG_VOLT()Dan Carpenter
This is only called from adt7462_update_device(). The caller expects it to return zero on error. I fixed a similar issue earlier in commit a4bf06d58f21 ("hwmon: (adt7462) ADT7462_REG_VOLT_MAX() should return 0") but I missed this one. Fixes: c0b4e3ab0c76 ("adt7462: new hwmon driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Link: https://lore.kernel.org/r/20200303101608.kqjwfcazu2ylhi2a@kili.mountain Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-03-03riscv: Change code model of module to medany to improve data accessingVincent Chen
All the loaded module locates in the region [＆_end-2G，VMALLOC_END] at runtime, so the distance from the module start to the end of the kernel image does not exceed 2GB. Hence, the code model of the kernel module can be changed to medany to improve the performance data access. Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-03riscv: avoid the PIC offset of static percpu data in module beyond 2G limitsVincent Chen
The compiler uses the PIC-relative method to access static variables instead of GOT when the code model is PIC. Therefore, the limitation of the access range from the instruction to the symbol address is +-2GB. Under this circumstance, the kernel cannot load a kernel module if this module has static per-CPU symbols declared by DEFINE_PER_CPU(). The reason is that kernel relocates the .data..percpu section of the kernel module to the end of kernel's .data..percpu. Hence, the distance between the per-CPU symbols and the instruction will exceed the 2GB limits. To solve this problem, the kernel should place the loaded module in the memory area [&_end-2G, VMALLOC_END]. Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Suggested-by: Alexandre Ghiti <alex@ghiti.fr> Suggested-by: Anup Patel <anup@brainfault.org> Tested-by: Alexandre Ghiti <alex@ghiti.fr> Tested-by: Carlos de Paula <me@carlosedp.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-03dm: bump version of core and various targetsMike Snitzer
Changes made during the 5.6 cycle warrant bumping the version number for DM core and the targets modified by this commit. It should be noted that dm-thin, dm-crypt and dm-raid already had their target version bumped during the 5.6 merge window. Signed-off-by; Mike Snitzer <snitzer@redhat.com>
2020-03-03dm: fix congested_fn for request-based deviceHou Tao
We neither assign congested_fn for requested-based blk-mq device nor implement it correctly. So fix both. Also, remove incorrect comment from dm_init_normal_md_queue and rename it to dm_init_congested_fn. Fixes: 4aa9c692e052 ("bdi: separate out congested state into a separate struct") Cc: stable@vger.kernel.org Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-03-03fcntl: Distribute switch variables for initializationKees Cook
Variables declared in a switch statement before any case statements cannot be automatically initialized with compiler instrumentation (as they are not part of any execution flow). With GCC's proposed automatic stack variable initialization feature, this triggers a warning (and they don't get initialized). Clang's automatic stack variable initialization (via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also doesn't initialize such variables[1]. Note that these warnings (or silent skipping) happen before the dead-store elimination optimization phase, so even when the automatic initializations are later elided in favor of direct initializations, the warnings remain. To avoid these problems, move such variables into the "case" where they're used or lift them up into the main function body. fs/fcntl.c: In function ‘send_sigio_to_task’: fs/fcntl.c:738:20: warning: statement will never be executed [-Wswitch-unreachable] 738 | kernel_siginfo_t si; | ^~ [1] https://bugs.llvm.org/show_bug.cgi?id=44916 Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jeff Layton <jlayton@kernel.org>
2020-03-03dm integrity: use dm_bio_record and dm_bio_restoreMike Snitzer
In cases where dec_in_flight() has to requeue the integrity_bio_wait work to transfer the rest of the data, the bio's __bi_remaining might already have been decremented to 0, e.g.: if bio passed to underlying data device was split via blk_queue_split(). Use dm_bio_{record,restore} rather than effectively open-coding them in dm-integrity -- these methods now manage __bi_remaining too. Depends-on: f7f0b057a9c1 ("dm bio record: save/restore bi_end_io and bi_integrity") Reported-by: Daniel Glöckner <dg@emlix.com> Suggested-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-03-03dm bio record: save/restore bi_end_io and bi_integrityMike Snitzer
Also, save/restore __bi_remaining in case the bio was used in a BIO_CHAIN (e.g. due to blk_queue_split). Suggested-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-03-03btrfs: fix RAID direct I/O reads with alternate csumsOmar Sandoval
btrfs_lookup_and_bind_dio_csum() does pointer arithmetic which assumes 32-bit checksums. If using a larger checksum, this leads to spurious failures when a direct I/O read crosses a stripe. This is easy to reproduce: # mkfs.btrfs -f --checksum blake2 -d raid0 /dev/vdc /dev/vdd ... # mount /dev/vdc /mnt # cd /mnt # dd if=/dev/urandom of=foo bs=1M count=1 status=none # dd if=foo of=/dev/null bs=1M iflag=direct status=none dd: error reading 'foo': Input/output error # dmesg | tail -1 [ 135.821568] BTRFS warning (device vdc): csum failed root 5 ino 257 off 421888 ... Fix it by using the actual checksum size. Fixes: 1e25a2e3ca0d ("btrfs: don't assume ordered sums to be 4 bytes") CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-03ASoC: SOF: Fix snd_sof_ipc_stream_posn()Dan Carpenter
We're passing "&posn" instead of "posn" so it ends up corrupting memory instead of doing something useful. Fixes: 53e0c72d98ba ("ASoC: SOF: Add support for IPC IO between DSP and Host") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200303101858.ytehbrivocyp3cnf@kili.mountain Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-03ASoC: rt1015: modify pre-divider for sysclkJack Yu
Modify pre-divider for system clock. Signed-off-by: Jack Yu <jack.yu@realtek.com> Link: https://lore.kernel.org/r/20200303025913.24499-1-jack.yu@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-03efi: Add embedded peripheral firmware supportHans de Goede
Just like with PCI options ROMs, which we save in the setup_efi_pci* functions from arch/x86/boot/compressed/eboot.c, the EFI code / ROM itself sometimes may contain data which is useful/necessary for peripheral drivers to have access to. Specifically the EFI code may contain an embedded copy of firmware which needs to be (re)loaded into the peripheral. Normally such firmware would be part of linux-firmware, but in some cases this is not feasible, for 2 reasons: 1) The firmware is customized for a specific use-case of the chipset / use with a specific hardware model, so we cannot have a single firmware file for the chipset. E.g. touchscreen controller firmwares are compiled specifically for the hardware model they are used with, as they are calibrated for a specific model digitizer. 2) Despite repeated attempts we have failed to get permission to redistribute the firmware. This is especially a problem with customized firmwares, these get created by the chip vendor for a specific ODM and the copyright may partially belong with the ODM, so the chip vendor cannot give a blanket permission to distribute these. This commit adds support for finding peripheral firmware embedded in the EFI code and makes the found firmware available through the new efi_get_embedded_fw() function. Support for loading these firmwares through the standard firmware loading mechanism is added in a follow-up commit in this patch-series. Note we check the EFI_BOOT_SERVICES_CODE for embedded firmware near the end of start_kernel(), just before calling rest_init(), this is on purpose because the typical EFI_BOOT_SERVICES_CODE memory-segment is too large for early_memremap(), so the check must be done after mm_init(). This relies on EFI_BOOT_SERVICES_CODE not being free-ed until efi_free_boot_services() is called, which means that this will only work on x86 for now. Reported-by: Dave Olsthoorn <dave@bewaar.me> Suggested-by: Peter Jones <pjones@redhat.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200115163554.101315-3-hdegoede@redhat.com Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-03-03efi: Export boot-services code and data as debugfs-blobsHans de Goede
Sometimes it is useful to be able to dump the efi boot-services code and data. This commit adds these as debugfs-blobs to /sys/kernel/debug/efi, but only if efi=debug is passed on the kernel-commandline as this requires not freeing those memory-regions, which costs 20+ MB of RAM. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200115163554.101315-2-hdegoede@redhat.com Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-03-02Revert "bcache: ignore pending signals when creating gc and allocator thread"Jens Axboe
This reverts commit 0b96da639a4874311e9b5156405f69ef9fc3bef8. We can't just go flushing random signals, under the assumption that the OOM killer will just do something else. It's not safe from the OOM perspective, and it could also cause other signals to get randomly lost. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-02dt-bindings: arm: fsl: fix APF6Dev compatibleSébastien Szymanski
APF6 Dev compatible is armadeus,imx6dl-apf6dev and not armadeus,imx6dl-apf6dldev. Fixes: 3d735471d066 ("dt-bindings: arm: Document Armadeus SoM and Dev boards devicetree binding") Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-02io-wq: remove io_wq_flush and IO_WQ_WORK_INTERNALPavel Begunkov
io_wq_flush() is buggy, during cancelation of a flush, the associated work may be passed to the caller's (i.e. io_uring) @match callback. That callback is expecting it to be embedded in struct io_kiocb. Cancelation of internal work probably doesn't make a lot of sense to begin with. As the flush helper is no longer used, just delete it and the associated work flag. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-02selftest/lkdtm: Use local .gitignoreChristophe Leroy
Commit 68ca0fd272da ("selftest/lkdtm: Don't pollute 'git status'") introduced patterns for git to ignore files generated in tools/testing/selftests/lkdtm/ Use local .gitignore file instead of using the root one. Fixes: 68ca0fd272da ("selftest/lkdtm: Don't pollute 'git status'") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-03-02IB/hfi1, qib: Ensure RCU is locked when accessing listDennis Dalessandro
The packet handling function, specifically the iteration of the qp list for mad packet processing misses locking RCU before running through the list. Not only is this incorrect, but the list_for_each_entry_rcu() call can not be called with a conditional check for lock dependency. Remedy this by invoking the rcu lock and unlock around the critical section. This brings MAD packet processing in line with what is done for non-MAD packets. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Link: https://lore.kernel.org/r/20200225195445.140896.41873.stgit@awfm-01.aw.intel.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-02spi: bcm63xx-hsspi: Really keep pll clk enabledChristophe JAILLET
The purpose of commit 0fd85869c2a9 ("spi/bcm63xx-hsspi: keep pll clk enabled") was to keep the pll clk enabled through the lifetime of the device. In order to do that, some 'clk_prepare_enable()'/'clk_disable_unprepare()' calls have been added in the error handling path of the probe function, in the remove function and in the suspend and resume functions. However, a 'clk_disable_unprepare()' call has been unfortunately left in the probe function. So the commit seems to be more or less a no-op. Axe it now, so that the pll clk is left enabled through the lifetime of the device, as described in the commit. Fixes: 0fd85869c2a9 ("spi/bcm63xx-hsspi: keep pll clk enabled") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Jonas Gorski <jonas.gorski@gmail.com> Link: https://lore.kernel.org/r/20200228213838.7124-1-christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-02io-wq: fix IO_WQ_WORK_NO_CANCEL cancellationPavel Begunkov
To cancel a work, io-wq sets IO_WQ_WORK_CANCEL and executes the callback. However, IO_WQ_WORK_NO_CANCEL works will just execute and may return next work, which will be ignored and lost. Cancel the whole link. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-02block: Remove used kblockd_schedule_work_on()Daniel Wagner
Commit ee63cfa7fc19 ("block: add kblockd_schedule_work_on()") introduced the helper in 2016. Remove it because since then no caller was added. Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-02ASoC: rt1015: add operation callback function for rt1015_dai[]Jack Yu
Add operation callback function for rt1015_dai[]. Signed-off-by: Jack Yu <jack.yu@realtek.com> Link: https://lore.kernel.org/r/20200302015424.9075-1-jack.yu@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-02Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: a pkeys fix for a bug that triggers with weird BIOS settings, and two Xen PV fixes: a paravirt interface fix, and pagetable dumping fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Fix dump_pagetables with Xen PV x86/ioperm: Add new paravirt function update_io_bitmap() x86/pkeys: Manually set X86_FEATURE_OSPKE to preserve existing changes
2020-03-02Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Ingo Molnar: "Fix a scheduler statistics bug" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix statistics for find_idlest_group()
2020-03-02Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "No kernel side changes, all tooling fixes plus two tooling cleanups that were committed late in the merge window alongside the perf annotate fixes, delayed by Arnaldo's European trip" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) perf annotate: Fix segfault with source toggle perf annotate: Align struct annotate_args perf annotate: Simplify disasm_line allocation and freeing code perf annotate: Remove privsize from symbol__annotate() args perf probe: Check return value of strlist__add() for -ENOMEM perf config: Document missing config options perf annotate: Fix perf config option description perf annotate: Prefer cmdline option over default config perf annotate: Make perf config effective perf config: Introduce perf_config_u8() perf annotate: Fix --show-nr-samples for tui/stdio2 perf annotate: Fix --show-total-period for tui/stdio2 perf annotate/tui: Re-render title bar after switching back from script browser tools headers UAPI: Update tools's copy of kvm.h headers tools arch x86: Sync the msr-index.h copy with the kernel sources perf arch powerpc: Sync powerpc syscall.tbl with the kernel sources perf auxtrace: Add auxtrace_record__read_finish() perf arm-spe: Fix endless record after being terminated perf cs-etm: Fix endless record after being terminated perf intel-bts: Fix endless record after being terminated ...
2020-03-02Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: "Three fixes to EFI mixed boot mode, mostly related to x86-64 vmap stacks activated years ago, bug-fixed recently for EFI, which had knock-on effects of various 1:1 mapping assumptions in mixed mode. There's also a READ_ONCE() fix for reading an mmap-ed EFI firmware data field only once, out of caution" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: READ_ONCE rng seed size before munmap efi/x86: Handle by-ref arguments covering multiple pages in mixed mode efi/x86: Remove support for EFI time and counter services in mixed mode efi/x86: Align GUIDs to their size in the mixed mode runtime wrapper
2020-03-02arm64: context: Fix ASID limit in boot messagesJean-Philippe Brucker
Since commit f88f42f853a8 ("arm64: context: Free up kernel ASIDs if KPTI is not in use"), the NUM_USER_ASIDS macro doesn't correspond to the effective number of ASIDs when KPTI is enabled. Get an accurate number of available ASIDs in an arch_initcall, once we've discovered all CPUs' capabilities and know if we still need to halve the ASID space for KPTI. Fixes: f88f42f853a8 ("arm64: context: Free up kernel ASIDs if KPTI is not in use") Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Will Deacon <will@kernel.org>
2020-03-02drivers/perf: arm_pmu_acpi: Fix incorrect checking of gicc pointerluanshi
Fix bogus NULL checks on the return value of acpi_cpu_get_madt_gicc() by checking for a 0 'gicc->performance_interrupt' value instead. Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-03-02drivers/perf: fsl_imx8_ddr: Correct the CLEAR bit definitionJoakim Zhang
When disabling a counter from ddr_perf_event_stop(), the counter value is reset to 0 at the same time. Preserve the counter value by performing a read-modify-write of the PMU register and clearing only the enable bit. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-03-02drm/i915/selftests: Fix return in assert_mmap_offset()Dan Carpenter
The assert_mmap_offset() returns type bool so if we return an error pointer that is "return true;" or success. If we have an error, then we should return false. Fixes: 3d81d589d6e3 ("drm/i915: Test exhaustion of the mmap space") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200228141413.qfjf4abr323drlo4@kili.mountain (cherry picked from commit efbf928824820f2738f41271934f6ec2c6ebd587) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-03-02drm/i915: Protect i915_request_await_start from early waitsChris Wilson
We need to be extremely careful inside i915_request_await_start() as it needs to walk the list of requests in the foreign timeline with very little protection. As we hold our own timeline mutex, we can not nest inside the signaler's timeline mutex, so all that remains is our RCU protection. However, to be safe we need to tell the compiler that we may be traversing the list only under RCU protection, and furthermore we need to start declaring requests as elements of the timeline from their construction. Fixes: 9ddc8ec027a3 ("drm/i915: Eliminate the trylock for awaiting an earlier request") Fixes: 6a79d848403d ("drm/i915: Lock signaler timeline while navigating") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200227085723.1961649-11-chris@chris-wilson.co.uk (cherry picked from commit d22d2d073ef859b346bc32cb25299262e3973769) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-03-02drm/i915/tgl: Add Wa_1608008084Lucas De Marchi
Wa_1608008084 is an additional WA that applies to writes on FF_MODE2 register. We can't read it back either from CPU or GPU. Since the other bits should be 0, recommendation to handle Wa_1604555607 is to actually just write the timer value. Do a write only and don't try to read it, neither before or after the WA is applied. Fixes: ff690b2111ba ("drm/i915/tgl: Implement Wa_1604555607") Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200224191258.15668-1-lucas.demarchi@intel.com (cherry picked from commit e94bda14325ccf1a519ffb516738d1201457f97f) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-03-02drm/i915/tgl: Add Wa_22010178259:tglMatt Roper
We need to explicitly set the TLB Request Timer initial value in the BW_BUDDY registers to 0x8 rather than relying on the hardware default. v2: Apply missing REG_FIELD_PREP to ensure 0x8 is placed in the correct bits during the rmw. (Jose) Bspec: 52890 Bspec: 50044 Fixes: 3fa01d642fa7 ("drm/i915/tgl: Program BW_BUDDY registers during display init") Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200219215655.2923650-1-matthew.d.roper@intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com> (cherry picked from commit 87e04f75928bb5d357ef7df4eedc1a7e2761a833) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200228004320.127142-2-matthew.d.roper@intel.com
2020-03-02drm/i915: Program MBUS with rmw during initializationMatt Roper
It wasn't terribly clear from the bspec's wording, but after discussion with the hardware folks, it turns out that we need to preserve the pre-existing contents of the MBUS ABOX control register when initializing a few specific bits. Bspec: 49213 Bspec: 50096 Fixes: 4cb4585e5a7f ("drm/i915/icl: initialize MBus during display init") Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200204011032.582737-1-matthew.d.roper@intel.com Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> (cherry picked from commit 837b63e6087838d0f1e612d448405419199d8033) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200228004320.127142-1-matthew.d.roper@intel.com
2020-03-02drm/i915/psr: Force PSR probe only after full initializationJosé Roberto de Souza
Commit 60c6a14b489b ("drm/i915/display: Force the state compute phase once to enable PSR") was forcing the state compute too earlier causing errors because not everything was initialized, so here moving to the end of i915_driver_modeset_probe() when the display is all initialized. Also fixing the place where it disarm the force probe as during the atomic check phase errors could happen like the ones due locking and it would cause PSR to never be enabled if that happens. Leaving the disarm to the atomic commit phase, intel_psr_enable() or intel_psr_update() will be called even if the current state do not allow PSR to be enabled. v2: Check if intel_dp is null in intel_psr_force_mode_changed_set() v3: Check intel_dp before get dev_priv v4: - renamed intel_psr_force_mode_changed_set() to intel_psr_set_force_mode_changed() - removed the set parameter from intel_psr_set_force_mode_changed() - not calling intel_psr_set_force_mode_changed() from intel_psr_enable/update(), directly setting it after the same checks that intel_psr_set_force_mode_changed() does - moved intel_psr_set_force_mode_changed() arm call to i915_driver_modeset_probe() as it is a better for a PSR call, all the functions calls happening between the old and the new function call will cause issue [backported to v5.6-rc3] Fixes: 60c6a14b489b ("drm/i915/display: Force the state compute phase once to enable PSR") Closes: https://gitlab.freedesktop.org/drm/intel/issues/1151 Tested-by: Ross Zwisler <zwisler@google.com> Reported-by: Ross Zwisler <zwisler@google.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200221212635.11614-1-jose.souza@intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20200227205540.126135-1-jose.souza@intel.com (cherry picked from commit df1a5bfc16f3275a74f77d73375e69bc62c45c4b) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-03-02drm/i915/gem: Break up long lists of object reclaimChris Wilson
Call cond_resched() between each freed object in case we have a really, really long list, and we don't want to block normal processes. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200221100953.2587176-1-chris@chris-wilson.co.uk (cherry picked from commit deeee411a97559096523f97655ff16da34cf0573) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
generated by cgit (git 2.34.1) at 2025-09-11 14:28:18 +0000