summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-02-26efi: READ_ONCE rng seed size before munmapJason A. Donenfeld
This function is consistent with using size instead of seed->size (except for one place that this patch fixes), but it reads seed->size without using READ_ONCE, which means the compiler might still do something unwanted. So, this commit simply adds the READ_ONCE wrapper. Fixes: 636259880a7e ("efi: Add support for seeding the RNG from a UEFI ...") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: linux-efi@vger.kernel.org Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20200217123354.21140-1-Jason@zx2c4.com Link: https://lore.kernel.org/r/20200221084849.26878-5-ardb@kernel.org
2020-02-26efi/x86: Handle by-ref arguments covering multiple pages in mixed modeArd Biesheuvel
The mixed mode runtime wrappers are fragile when it comes to how the memory referred to by its pointer arguments are laid out in memory, due to the fact that it translates these addresses to physical addresses that the runtime services can dereference when running in 1:1 mode. Since vmalloc'ed pages (including the vmap'ed stack) are not contiguous in the physical address space, this scheme only works if the referenced memory objects do not cross page boundaries. Currently, the mixed mode runtime service wrappers require that all by-ref arguments that live in the vmalloc space have a size that is a power of 2, and are aligned to that same value. While this is a sensible way to construct an object that is guaranteed not to cross a page boundary, it is overly strict when it comes to checking whether a given object violates this requirement, as we can simply take the physical address of the first and the last byte, and verify that they point into the same physical page. When this check fails, we emit a WARN(), but then simply proceed with the call, which could cause data corruption if the next physical page belongs to a mapping that is entirely unrelated. Given that with vmap'ed stacks, this condition is much more likely to trigger, let's relax the condition a bit, but fail the runtime service call if it does trigger. Fixes: f6697df36bdf0bf7 ("x86/efi: Prevent mixed mode boot corruption with CONFIG_VMAP_STACK=y") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: linux-efi@vger.kernel.org Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20200221084849.26878-4-ardb@kernel.org
2020-02-26efi/x86: Remove support for EFI time and counter services in mixed modeArd Biesheuvel
Mixed mode calls at runtime are rather tricky with vmap'ed stacks, as we can no longer assume that data passed in by the callers of the EFI runtime wrapper routines is contiguous in physical memory. We need to fix this, but before we do, let's drop the implementations of routines that we know are never used on x86, i.e., the RTC related ones. Given that UEFI rev2.8 permits any runtime service to return EFI_UNSUPPORTED at runtime, let's return that instead. As get_next_high_mono_count() is never used at all, even on other architectures, let's make that return EFI_UNSUPPORTED too. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: linux-efi@vger.kernel.org Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20200221084849.26878-3-ardb@kernel.org
2020-02-26efi/x86: Align GUIDs to their size in the mixed mode runtime wrapperArd Biesheuvel
Hans reports that his mixed mode systems running v5.6-rc1 kernels hit the WARN_ON() in virt_to_phys_or_null_size(), caused by the fact that efi_guid_t objects on the vmap'ed stack happen to be misaligned with respect to their sizes. As a quick (i.e., backportable) fix, copy GUID pointer arguments to the local stack into a buffer that is naturally aligned to its size, so that it is guaranteed to cover only one physical page. Note that on x86, we cannot rely on the stack pointer being aligned the way the compiler expects, so we need to allocate an 8-byte aligned buffer of sufficient size, and copy the GUID into that buffer at an offset that is aligned to 16 bytes. Fixes: f6697df36bdf0bf7 ("x86/efi: Prevent mixed mode boot corruption with CONFIG_VMAP_STACK=y") Reported-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Hans de Goede <hdegoede@redhat.com> Cc: linux-efi@vger.kernel.org Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20200221084849.26878-2-ardb@kernel.org
2020-02-26Merge tag 'efi-next' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core Pull EFI updates for v5.7 from Ard Biesheuvel: This time, the set of changes for the EFI subsystem is much larger than usual. The main reasons are: - Get things cleaned up before EFI support for RISC-V arrives, which will increase the size of the validation matrix, and therefore the threshold to making drastic changes, - After years of defunct maintainership, the GRUB project has finally started to consider changes from the distros regarding UEFI boot, some of which are highly specific to the way x86 does UEFI secure boot and measured boot, based on knowledge of both shim internals and the layout of bootparams and the x86 setup header. Having this maintenance burden on other architectures (which don't need shim in the first place) is hard to justify, so instead, we are introducing a generic Linux/UEFI boot protocol. Summary of changes: - Boot time GDT handling changes (Arvind) - Simplify handling of EFI properties table on arm64 - Generic EFI stub cleanups, to improve command line handling, file I/O, memory allocation, etc. - Introduce a generic initrd loading method based on calling back into the firmware, instead of relying on the x86 EFI handover protocol or device tree. - Introduce a mixed mode boot method that does not rely on the x86 EFI handover protocol either, and could potentially be adopted by other architectures (if another one ever surfaces where one execution mode is a superset of another) - Clean up the contents of struct efi, and move out everything that doesn't need to be stored there. - Incorporate support for UEFI spec v2.8A changes that permit firmware implementations to return EFI_UNSUPPORTED from UEFI runtime services at OS runtime, and expose a mask of which ones are supported or unsupported via a configuration table. - Various documentation updates and minor code cleanups (Heinrich) - Partial fix for the lack of by-VA cache maintenance in the decompressor on 32-bit ARM. Note that these patches were deliberately put at the beginning so they can be used as a stable branch that will be shared with a PR containing the complete fix, which I will send to the ARM tree. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-02-26Merge tag 'perf-urgent-for-mingo-5.6-20200220' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: auxtrace: Adrian Hunter: - Fix endless record after being terminated on arm-spe. Wei Li: - Fix endless record after being terminated on Intel PT and BTS and on ARM's cs-etm. perf test: Thomas Richter - Fix test trace+probe_vfs_getname.sh on s390 PowerPC: Arnaldo Carvalho de Melo: - Sync powerpc syscall.tbl with the kernel sources. BPF: Arnaldo Carvalho de Melo: - Remove extraneous bpf/ subdir from bpf.h headers used to build bpf events. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-02-26io_uring: import_single_range() returns 0/-ERRORJens Axboe
Unlike the other core import helpers, import_single_range() returns 0 on success, not the length imported. This means that links that depend on the result of non-vec based IORING_OP_{READ,WRITE} that were added for 5.5 get errored when they should not be. Fixes: 3a6820f2bb8a ("io_uring: add non-vectored read/write commands") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-26io_uring: pick up link work on submit reference dropJens Axboe
If work completes inline, then we should pick up a dependent link item in __io_queue_sqe() as well. If we don't do so, we're forced to go async with that item, which is suboptimal. This also fixes an issue with io_put_req_find_next(), which always looks up the next work item. That should only be done if we're dropping the last reference to the request, to prevent multiple lookups of the same work item. Outside of being a fix, this also enables a good cleanup series for 5.7, where we never have to pass 'nxt' around or into the work handlers. Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-26selftests: nft_concat_range: Add test for reported add/flush/add issueStefano Brivio
Add a specific test for the crash reported by Phil Sutter and addressed in the previous patch. The test cases that, in my intention, should have covered these cases, that is, the ones from the 'concurrency' section, don't run these sequences tightly enough and spectacularly failed to catch this. While at it, define a convenient way to add these kind of tests, by adding a "reported issues" test section. It's more convenient, for this particular test, to execute the set setup in its own function. However, future test cases like this one might need to call setup functions, and will typically need no tools other than nft, so allow for this in check_tools(). The original form of the reproducer used here was provided by Phil. Reported-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-02-26nft_set_pipapo: Actually fetch key data in nft_pipapo_remove()Stefano Brivio
Phil reports that adding elements, flushing and re-adding them right away: nft add table t '{ set s { type ipv4_addr . inet_service; flags interval; }; }' nft add element t s '{ 10.0.0.1 . 22-25, 10.0.0.1 . 10-20 }' nft flush set t s nft add element t s '{ 10.0.0.1 . 10-20, 10.0.0.1 . 22-25 }' triggers, almost reliably, a crash like this one: [ 71.319848] general protection fault, probably for non-canonical address 0x6f6b6e696c2e756e: 0000 [#1] PREEMPT SMP PTI [ 71.321540] CPU: 3 PID: 1201 Comm: kworker/3:2 Not tainted 5.6.0-rc1-00377-g2bb07f4e1d861 #192 [ 71.322746] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190711_202441-buildvm-armv7-10.arm.fedoraproject.org-2.fc31 04/01/2014 [ 71.324430] Workqueue: events nf_tables_trans_destroy_work [nf_tables] [ 71.325387] RIP: 0010:nft_set_elem_destroy+0xa5/0x110 [nf_tables] [ 71.326164] Code: 89 d4 84 c0 74 0e 8b 77 44 0f b6 f8 48 01 df e8 41 ff ff ff 45 84 e4 74 36 44 0f b6 63 08 45 84 e4 74 2c 49 01 dc 49 8b 04 24 <48> 8b 40 38 48 85 c0 74 4f 48 89 e7 4c 8b [ 71.328423] RSP: 0018:ffffc9000226fd90 EFLAGS: 00010282 [ 71.329225] RAX: 6f6b6e696c2e756e RBX: ffff88813ab79f60 RCX: ffff88813931b5a0 [ 71.330365] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff88813ab79f9a [ 71.331473] RBP: ffff88813ab79f60 R08: 0000000000000008 R09: 0000000000000000 [ 71.332627] R10: 000000000000021c R11: 0000000000000000 R12: ffff88813ab79fc2 [ 71.333615] R13: ffff88813b3adf50 R14: dead000000000100 R15: ffff88813931b8a0 [ 71.334596] FS: 0000000000000000(0000) GS:ffff88813bd80000(0000) knlGS:0000000000000000 [ 71.335780] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 71.336577] CR2: 000055ac683710f0 CR3: 000000013a222003 CR4: 0000000000360ee0 [ 71.337533] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 71.338557] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 71.339718] Call Trace: [ 71.340093] nft_pipapo_destroy+0x7a/0x170 [nf_tables_set] [ 71.340973] nft_set_destroy+0x20/0x50 [nf_tables] [ 71.341879] nf_tables_trans_destroy_work+0x246/0x260 [nf_tables] [ 71.342916] process_one_work+0x1d5/0x3c0 [ 71.343601] worker_thread+0x4a/0x3c0 [ 71.344229] kthread+0xfb/0x130 [ 71.344780] ? process_one_work+0x3c0/0x3c0 [ 71.345477] ? kthread_park+0x90/0x90 [ 71.346129] ret_from_fork+0x35/0x40 [ 71.346748] Modules linked in: nf_tables_set nf_tables nfnetlink 8021q [last unloaded: nfnetlink] [ 71.348153] ---[ end trace 2eaa8149ca759bcc ]--- [ 71.349066] RIP: 0010:nft_set_elem_destroy+0xa5/0x110 [nf_tables] [ 71.350016] Code: 89 d4 84 c0 74 0e 8b 77 44 0f b6 f8 48 01 df e8 41 ff ff ff 45 84 e4 74 36 44 0f b6 63 08 45 84 e4 74 2c 49 01 dc 49 8b 04 24 <48> 8b 40 38 48 85 c0 74 4f 48 89 e7 4c 8b [ 71.350017] RSP: 0018:ffffc9000226fd90 EFLAGS: 00010282 [ 71.350019] RAX: 6f6b6e696c2e756e RBX: ffff88813ab79f60 RCX: ffff88813931b5a0 [ 71.350019] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff88813ab79f9a [ 71.350020] RBP: ffff88813ab79f60 R08: 0000000000000008 R09: 0000000000000000 [ 71.350021] R10: 000000000000021c R11: 0000000000000000 R12: ffff88813ab79fc2 [ 71.350022] R13: ffff88813b3adf50 R14: dead000000000100 R15: ffff88813931b8a0 [ 71.350025] FS: 0000000000000000(0000) GS:ffff88813bd80000(0000) knlGS:0000000000000000 [ 71.350026] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 71.350027] CR2: 000055ac683710f0 CR3: 000000013a222003 CR4: 0000000000360ee0 [ 71.350028] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 71.350028] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 71.350030] Kernel panic - not syncing: Fatal exception [ 71.350412] Kernel Offset: disabled [ 71.365922] ---[ end Kernel panic - not syncing: Fatal exception ]--- which is caused by dangling elements that have been deactivated, but never removed. On a flush operation, nft_pipapo_walk() walks through all the elements in the mapping table, which are then deactivated by nft_flush_set(), one by one, and added to the commit list for removal. Element data is then freed. On transaction commit, nft_pipapo_remove() is called, and failed to remove these elements, leading to the stale references in the mapping. The first symptom of this, revealed by KASan, is a one-byte use-after-free in subsequent calls to nft_pipapo_walk(), which is usually not enough to trigger a panic. When stale elements are used more heavily, though, such as double-free via nft_pipapo_destroy() as in Phil's case, the problem becomes more noticeable. The issue comes from that fact that, on a flush operation, nft_pipapo_remove() won't get the actual key data via elem->key, elements to be deleted upon commit won't be found by the lookup via pipapo_get(), and removal will be skipped. Key data should be fetched via nft_set_ext_key(), instead. Reported-by: Phil Sutter <phil@nwl.cc> Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-02-26drm/ttm: fix leaking fences via ttm_buffer_object_transferAhzo
Set the drm_device to NULL, so that the newly created buffer object doesn't appear to use the embedded gem object. This is necessary, because otherwise no corresponding dma_resv_fini for the dma_resv_init is called, resulting in a memory leak. The dma_resv_fini in ttm_bo_release_list is only called if the embedded gem object is not used, which is determined by checking if the drm_device is NULL. Bug: https://gitlab.freedesktop.org/drm/amd/issues/958 Fixes: 1e053b10ba60 ("drm/ttm: use gem reservation object") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Ahzo <Ahzo@tutanota.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/355089/
2020-02-26Merge branch 'master' of git://blackhole.kfki.hu/nfPablo Neira Ayuso
Jozsef Kadlecsik says: ==================== ipset patches for nf The first one is larger than usual, but the issue could not be solved simpler. Also, it's a resend of the patch I submitted a few days ago, with a one line fix on top of that: the size of the comment extensions was not taken into account at reporting the full size of the set. - Fix "INFO: rcu detected stall in hash_xxx" reports of syzbot by introducing region locking and using workqueue instead of timer based gc of timed out entries in hash types of sets in ipset. - Fix the forceadd evaluation path - the bug was also uncovered by the syzbot. ==================== Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-02-26drm/i915: Avoid recursing onto active vma from the shrinkerChris Wilson
We mark the vma as active while binding it in order to protect outselves from being shrunk under mempressure. This only works if we are strict in not attempting to shrink active objects. <6> [472.618968] Workqueue: events_unbound fence_work [i915] <4> [472.618970] Call Trace: <4> [472.618974] ? __schedule+0x2e5/0x810 <4> [472.618978] schedule+0x37/0xe0 <4> [472.618982] schedule_preempt_disabled+0xf/0x20 <4> [472.618984] __mutex_lock+0x281/0x9c0 <4> [472.618987] ? mark_held_locks+0x49/0x70 <4> [472.618989] ? _raw_spin_unlock_irqrestore+0x47/0x60 <4> [472.619038] ? i915_vma_unbind+0xae/0x110 [i915] <4> [472.619084] ? i915_vma_unbind+0xae/0x110 [i915] <4> [472.619122] i915_vma_unbind+0xae/0x110 [i915] <4> [472.619165] i915_gem_object_unbind+0x1dc/0x400 [i915] <4> [472.619208] i915_gem_shrink+0x328/0x660 [i915] <4> [472.619250] ? i915_gem_shrink_all+0x38/0x60 [i915] <4> [472.619282] i915_gem_shrink_all+0x38/0x60 [i915] <4> [472.619325] vm_alloc_page.constprop.25+0x1aa/0x240 [i915] <4> [472.619330] ? rcu_read_lock_sched_held+0x4d/0x80 <4> [472.619363] ? __alloc_pd+0xb/0x30 [i915] <4> [472.619366] ? module_assert_mutex_or_preempt+0xf/0x30 <4> [472.619368] ? __module_address+0x23/0xe0 <4> [472.619371] ? is_module_address+0x26/0x40 <4> [472.619374] ? static_obj+0x34/0x50 <4> [472.619376] ? lockdep_init_map+0x4d/0x1e0 <4> [472.619407] setup_page_dma+0xd/0x90 [i915] <4> [472.619437] alloc_pd+0x29/0x50 [i915] <4> [472.619470] __gen8_ppgtt_alloc+0x443/0x6b0 [i915] <4> [472.619503] gen8_ppgtt_alloc+0xd7/0x300 [i915] <4> [472.619535] ppgtt_bind_vma+0x2a/0xe0 [i915] <4> [472.619577] __vma_bind+0x26/0x40 [i915] <4> [472.619611] fence_work+0x1c/0x90 [i915] <4> [472.619617] process_one_work+0x26a/0x620 Fixes: 2850748ef876 ("drm/i915: Pull i915_vma_pin under the vm->mutex") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200221221818.2861432-1-chris@chris-wilson.co.uk (cherry picked from commit 6f24e41022f28061368776ea1514db0a6e67a9b1) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-02-26drm/i915/pmu: Avoid using globals for PMU eventsMichał Winiarski
Attempting to bind / unbind module from devices where we have both integrated and discreete GPU handled by i915, will cause us to try and double free the global state, hitting null ptr deref in free_event_attributes. Let's move it to i915_pmu. Fixes: 05488673a4d4 ("drm/i915/pmu: Support multiple GPUs") Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200219161822.24592-2-michal.winiarski@intel.com (cherry picked from commit 46129dc10f47c5c2b51c93a82b7b2aca46574ae0) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-02-26drm/i915/pmu: Avoid using globals for CPU hotplug stateMichał Winiarski
Attempting to bind / unbind module from devices where we have both integrated and discreete GPU handled by i915 can lead to leaks and warnings from cpuhp: Error: Removing state XXX which has instances left. Let's move the state to i915_pmu. Fixes: 05488673a4d4 ("drm/i915/pmu: Support multiple GPUs") Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200219161822.24592-1-michal.winiarski@intel.com (cherry picked from commit f5a179d4687d4e7bfadd7cbda7ee5d0bad76761f) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-02-26drm/i915/gtt: Downgrade gen7 (ivb, byt, hsw) back to aliasing-ppgttChris Wilson
Full-ppgtt on gen7 is proving to be highly unstable and not robust. Closes: https://gitlab.freedesktop.org/drm/intel/issues/694 Fixes: 3cd6e8860ecd ("drm/i915/gen7: Re-enable full-ppgtt for ivb & hsw") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Dave Airlie <airlied@redhat.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200224101120.4024481-1-chris@chris-wilson.co.uk (cherry picked from commit 4fbe112a569526e46fa2accb5763c069f78cb431) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-02-26drm/i915: fix header test with GCOVJani Nikula
$(CC) with $(CFLAGS_GCOV) assumes the output filename with .gcno suffix appended is writable. This is not the case when the output filename is /dev/null: HDRTEST drivers/gpu/drm/i915/display/intel_frontbuffer.h /dev/null:1:0: error: cannot open /dev/null.gcno HDRTEST drivers/gpu/drm/i915/display/intel_ddi.h /dev/null:1:0: error: cannot open /dev/null.gcno make[5]: *** [../drivers/gpu/drm/i915/Makefile:307: drivers/gpu/drm/i915/display/intel_ddi.hdrtest] Error 1 make[5]: *** Waiting for unfinished jobs.... make[5]: *** [../drivers/gpu/drm/i915/Makefile:307: drivers/gpu/drm/i915/display/intel_frontbuffer.hdrtest] Error 1 Filter out $(CFLAGS_GVOC) from the header test $(c_flags) as they don't make sense here anyway. References: http://lore.kernel.org/r/d8112767-4089-4c58-d7d3-2ce03139858a@infradead.org Reported-by: Randy Dunlap <rdunlap@infradead.org> Fixes: c6d4a099a240 ("drm/i915: reimplement header test feature") Cc: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200221105414.14358-1-jani.nikula@intel.com (cherry picked from commit 408c1b3253dab93da175690dc0e21dd8bccf3371) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-02-26zonefs: select FS_IOMAPJohannes Thumshirn
Zonefs makes use of iomap internally, so it should also select iomap in Kconfig. Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
2020-02-26zonefs: fix IOCB_NOWAIT handlingChristoph Hellwig
IOCB_NOWAIT can't just be ignored as it breaks applications expecting it not to block. Just refuse the operation as applications must handle that (e.g. by falling back to a thread pool). Fixes: 8dcc1a9d90c1 ("fs: New zonefs file system") Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
2020-02-25bootconfig: Fix CONFIG_BOOTTIME_TRACING dependency issueMasami Hiramatsu
Since commit d8a953ddde5e ("bootconfig: Set CONFIG_BOOT_CONFIG=n by default") also changed the CONFIG_BOOTTIME_TRACING to select CONFIG_BOOT_CONFIG to show the boot-time tracing on the menu, it introduced wrong dependencies with BLK_DEV_INITRD as below. WARNING: unmet direct dependencies detected for BOOT_CONFIG Depends on [n]: BLK_DEV_INITRD [=n] Selected by [y]: - BOOTTIME_TRACING [=y] && TRACING_SUPPORT [=y] && FTRACE [=y] && TRACING [=y] This makes the CONFIG_BOOT_CONFIG selects CONFIG_BLK_DEV_INITRD to fix this error and make CONFIG_BOOTTIME_TRACING=n by default, so that both boot-time tracing and boot configuration off but those appear on the menu list. Link: http://lkml.kernel.org/r/158264140162.23842.11237423518607465535.stgit@devnote2 Fixes: d8a953ddde5e ("bootconfig: Set CONFIG_BOOT_CONFIG=n by default") Reported-by: Randy Dunlap <rdunlap@infradead.org> Compiled-tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-25hwmon: (pmbus/xdpe12284) Add callback for vout limits conversionVadim Pasternak
Provide read_word_data() callback for overvoltage and undervoltage output readouts conversion. These registers are presented in 'slinear11' format, while default conversion for 'vout' class for the devices is 'vid'. It is resulted in wrong conversion in pmbus_reg2data() for in{3-4}_lcrit and in{3-4}_crit attributes. ) Fixes: aaafb7c8eb1c ("hwmon: (pmbus) Add support for Infineon Multi-phase xdpe122 family controllers") Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Link: https://lore.kernel.org/r/20200224225202.19576-1-vadimp@mellanox.com [gropeck: Adjusted to mainline PMBus API] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-02-25io-wq: ensure work->task_pid is cleared on initJens Axboe
We use ->task_pid for exit cancellation, but we need to ensure it's cleared to zero for io_req_work_grab_env() to do the right thing. Take a suggestion from Bart and clear the whole thing, just setting the function passed in. This makes it more future proof as well. Fixes: 36282881a795 ("io-wq: add io_wq_cancel_pid() to cancel based on a specific pid") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-25drm/panfrost: Don't try to map on error faultsTomeu Vizoso
If the exception type isn't a translation fault, don't try to map and instead go straight to a terminal fault. Otherwise, we can get flooded by kernel warnings and further faults. Fixes: 187d2929206e ("drm/panfrost: Add support for GPU heap allocations") Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200212202236.13095-1-robh@kernel.org
2020-02-25icmp: allow icmpv6_ndo_send to work with CONFIG_IPV6=nJason A. Donenfeld
The icmpv6_send function has long had a static inline implementation with an empty body for CONFIG_IPV6=n, so that code calling it doesn't need to be ifdef'd. The new icmpv6_ndo_send function, which is intended for drivers as a drop-in replacement with an identical function signature, should follow the same pattern. Without this patch, drivers that used to work with CONFIG_IPV6=n now result in a linker error. Cc: Chen Zhou <chenzhou10@huawei.com> Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 0b41713b6066 ("icmp: introduce helper for nat'd source address in network device context") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-25Merge tag 'riscv-for-linux-5.6-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: "This contains a handful of RISC-V related fixes that I've collected and would like to target for 5.6-rc4: - A fix to set up the PMPs on boot, which allows the kernel to access memory on systems that don't set up permissive PMPs before getting to Linux. This only effects machine-mode kernels, which currently means only NOMMU kernels. - A fix to avoid enabling supervisor-mode interrupts when running in machine-mode, also only for NOMMU kernels. - A pair of fixes to our KASAN support to avoid corrupting memory. - A gitignore fix. This boots on QEMU's virt board for me" * tag 'riscv-for-linux-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: adjust the indent riscv: allocate a complete page size for each page table riscv: Fix gitignore RISC-V: Don't enable all interrupts in trap_init() riscv: set pmp configuration if kernel is running in M-mode
2020-02-25Merge branch 'mips-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Paul Burton: "Here are a few MIPS fixes, and a MAINTAINERS update to hand over MIPS maintenance to Thomas Bogendoerfer - this will be my final pull request as MIPS maintainer. Thanks for your helpful comments, useful corrections & responsiveness during the time I've fulfilled the role, and I'm sure I'll pop up elsewhere in the tree somewhere down the line" * 'mips-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MAINTAINERS: Hand MIPS over to Thomas MIPS: ingenic: DTS: Fix watchdog nodes MIPS: X1000: Fix clock of watchdog node. MIPS: vdso: Wrap -mexplicit-relocs in cc-option MIPS: VPE: Fix a double free and a memory leak in 'release_vpe()' MIPS: cavium_octeon: Fix syncw generation. mips: vdso: add build time check that no 'jalr t9' calls left MIPS: Disable VDSO time functionality on microMIPS mips: vdso: fix 'jalr t9' crash in vdso code
2020-02-25dm integrity: fix invalid table returned due to argument count mismatchMikulas Patocka
If the flag SB_FLAG_RECALCULATE is present in the superblock, but it was not specified on the command line (i.e. ic->recalculate_flag is false), dm-integrity would return invalid table line - the reported number of arguments would not match the real number. Fixes: 468dfca38b1a ("dm integrity: add a bitmap mode") Cc: stable@vger.kernel.org # v5.2+ Reported-by: Ondrej Kozina <okozina@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-02-25dm integrity: fix a deadlock due to offloading to an incorrect workqueueMikulas Patocka
If we need to perform synchronous I/O in dm_integrity_map_continue(), we must make sure that we are not in the map function - in order to avoid the deadlock due to bio queuing in generic_make_request. To avoid the deadlock, we offload the request to metadata_wq. However, metadata_wq also processes metadata updates for write requests. If there are too many requests that get offloaded to metadata_wq at the beginning of dm_integrity_map_continue, the workqueue metadata_wq becomes clogged and the system is incapable of processing any metadata updates. This causes a deadlock because all the requests that need to do metadata updates wait for metadata_wq to proceed and metadata_wq waits inside wait_and_add_new_range until some existing request releases its range lock (which doesn't happen because the range lock is released after metadata update). In order to fix the deadlock, we create a new workqueue offload_wq and offload requests to it - so that processing of offload_wq is independent from processing of metadata_wq. Fixes: 7eada909bfd7 ("dm: add integrity target") Cc: stable@vger.kernel.org # v4.12+ Reported-by: Heinz Mauelshagen <heinzm@redhat.com> Tested-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-02-25dm integrity: fix recalculation when moving from journal mode to bitmap modeMikulas Patocka
If we resume a device in bitmap mode and the on-disk format is in journal mode, we must recalculate anything above ic->sb->recalc_sector. Otherwise, there would be non-recalculated blocks which would cause I/O errors. Fixes: 468dfca38b1a ("dm integrity: add a bitmap mode") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-02-25null_blk: remove unused fields in 'nullb_cmd'Dongli Zhang
'list', 'll_list' and 'csd' are no longer used. The 'list' is not used since it was introduced by commit f2298c0403b0 ("null_blk: multi queue aware block test driver"). The 'll_list' is no longer used since commit 3c395a969acc ("null_blk: set a separate timer for each command"). The 'csd' is no longer used since commit ce2c350b2cfe ("null_blk: use blk_complete_request and blk_mq_complete_request"). Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-25amdgpu/gmc_v9: save/restore sdpif regs during S3Shirish S
fixes S3 issue with IOMMU + S/G enabled @ 64M VRAM. Suggested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-02-25drm/amdgpu: fix memory leak during TDR test(v2)Monk Liu
fix system memory leak v2: fix coding style Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25io-wq: remove spin-for-work optimizationJens Axboe
Andres reports that buffered IO seems to suck up more cycles than we would like, and he narrowed it down to the fact that the io-wq workers will briefly spin for more work on completion of a work item. This was a win on the networking side, but apparently some other cases take a hit because of it. Remove the optimization to avoid burning more CPU than we have to for disk IO. Reported-by: Andres Freund <andres@anarazel.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-25io_uring: fix poll_list race for SETUP_IOPOLL|SETUP_SQPOLLXiaoguang Wang
After making ext4 support iopoll method: let ext4_file_operations's iopoll method be iomap_dio_iopoll(), we found fio can easily hang in fio_ioring_getevents() with below fio job: rm -f testfile; sync; sudo fio -name=fiotest -filename=testfile -iodepth=128 -thread -rw=write -ioengine=io_uring -hipri=1 -sqthread_poll=1 -direct=1 -bs=4k -size=10G -numjobs=8 -runtime=2000 -group_reporting with IORING_SETUP_SQPOLL and IORING_SETUP_IOPOLL enabled. There are two issues that results in this hang, one reason is that when IORING_SETUP_SQPOLL and IORING_SETUP_IOPOLL are enabled, fio does not use io_uring_enter to get completed events, it relies on kernel io_sq_thread to poll for completed events. Another reason is that there is a race: when io_submit_sqes() in io_sq_thread() submits a batch of sqes, variable 'inflight' will record the number of submitted reqs, then io_sq_thread will poll for reqs which have been added to poll_list. But note, if some previous reqs have been punted to io worker, these reqs will won't be in poll_list timely. io_sq_thread() will only poll for a part of previous submitted reqs, and then find poll_list is empty, reset variable 'inflight' to be zero. If app just waits these deferred reqs and does not wake up io_sq_thread again, then hang happens. For app that entirely relies on io_sq_thread to poll completed requests, let io_iopoll_req_issued() wake up io_sq_thread properly when adding new element to poll_list, and when io_sq_thread prepares to sleep, check whether poll_list is empty again, if not empty, continue to poll. Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-25blktrace: Protect q->blk_trace with RCUJan Kara
KASAN is reporting that __blk_add_trace() has a use-after-free issue when accessing q->blk_trace. Indeed the switching of block tracing (and thus eventual freeing of q->blk_trace) is completely unsynchronized with the currently running tracing and thus it can happen that the blk_trace structure is being freed just while __blk_add_trace() works on it. Protect accesses to q->blk_trace by RCU during tracing and make sure we wait for the end of RCU grace period when shutting down tracing. Luckily that is rare enough event that we can afford that. Note that postponing the freeing of blk_trace to an RCU callback should better be avoided as it could have unexpected user visible side-effects as debugfs files would be still existing for a short while block tracing has been shut down. Link: https://bugzilla.kernel.org/show_bug.cgi?id=205711 CC: stable@vger.kernel.org Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reported-by: Tristan Madani <tristmd@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-25selftests: nft_concat_range: Move option for 'list ruleset' before commandStefano Brivio
Before nftables commit fb9cea50e8b3 ("main: enforce options before commands"), 'nft list ruleset -a' happened to work, but it's wrong and won't work anymore. Replace it by 'nft -a list ruleset'. Reported-by: Chen Yi <yiche@redhat.com> Fixes: 611973c1e06f ("selftests: netfilter: Introduce tests for sets with range concatenation") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-02-25docs: Fix empty parallelism argumentKees Cook
When there was no parallelism (no top-level -j arg and a pre-1.7 sphinx-build), the argument passed would be empty ("") instead of just being missing, which would (understandably) badly confuse sphinx-build. Fix this by removing the quotes. Reported-by: Rafael J. Wysocki <rafael@kernel.org> Fixes: 51e46c7a4007 ("docs, parallelism: Rearrange how jobserver reservations are made") Cc: stable@vger.kernel.org # v5.5 only Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-02-25docs: remove MPX from the x86 tocStephen Kitt
MPX was removed in commit 45fc24e89b7c ("x86/mpx: remove MPX from arch/x86"), this removes the corresponding entry in the x86 toc. This was suggested by a Sphinx warning. Signed-off-by: Stephen Kitt <steve@sk2.org> Fixes: 45fc24e89b7cc ("x86/mpx: remove MPX from arch/x86") Acked-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-02-25dmaengine: imx-sdma: Fix the event id check to include RX event for UART6Frieder Schrempf
On i.MX6UL/ULL and i.MX6SX the DMA event id for the RX channel of UART6 is '0'. To fix the broken DMA support for UART6, we change the check for event_id0 to include '0' as a valid id. Fixes: 1ec1e82f2510 ("dmaengine: Add Freescale i.MX SDMA support") Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200225082139.7646-1-frieder.schrempf@kontron.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25drm/i915/gvt: Fix orphan vgpu dmabuf_objs' lifetimeTina Zhang
Deleting dmabuf item's list head after releasing its container can lead to KASAN-reported issue: BUG: KASAN: use-after-free in __list_del_entry_valid+0x15/0xf0 Read of size 8 at addr ffff88818a4598a8 by task kworker/u8:3/13119 So fix this issue by puting deleting dmabuf_objs ahead of releasing its container. Fixes: dfb6ae4e14bd6 ("drm/i915/gvt: Handle orphan dmabuf_objs") Signed-off-by: Tina Zhang <tina.zhang@intel.com> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200225053527.8336-2-tina.zhang@intel.com
2020-02-24MAINTAINERS: Hand MIPS over to ThomasPaul Burton
My time with MIPS the company has reached its end, and so at best I'll have little time spend on maintaining arch/mips/. Ralf last authored a patch over 2 years ago, the last time he committed one is even further back & activity was sporadic for a while before that. The reality is that he isn't active. Having a new maintainer with time to do things properly will be beneficial all round. Thomas Bogendoerfer has been involved in MIPS development for a long time & has offered to step up as maintainer, so add Thomas and remove myself & Ralf from the MIPS entry. Ralf already has an entry in CREDITS to honor his contributions, so this just adds one for me. Signed-off-by: Paul Burton <paulburton@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@vger.kernel.org
2020-02-25dmaengine: tegra-apb: Prevent race conditions of tasklet vs free listDmitry Osipenko
The interrupt handler puts a half-completed DMA descriptor on a free list and then schedules tasklet to process bottom half of the descriptor that executes client's callback, this creates possibility to pick up the busy descriptor from the free list. Thus, let's disallow descriptor's re-use until it is fully processed. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200209163356.6439-3-digetx@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25dmaengine: tegra-apb: Fix use-after-freeDmitry Osipenko
I was doing some experiments with I2C and noticed that Tegra APB DMA driver crashes sometime after I2C DMA transfer termination. The crash happens because tegra_dma_terminate_all() bails out immediately if pending list is empty, and thus, it doesn't release the half-completed descriptors which are getting re-used before ISR tasklet kicks-in. tegra-i2c 7000c400.i2c: DMA transfer timeout elants_i2c 0-0010: elants_i2c_irq: failed to read data: -110 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 142 at lib/list_debug.c:45 __list_del_entry_valid+0x45/0xac list_del corruption, ddbaac44->next is LIST_POISON1 (00000100) Modules linked in: CPU: 0 PID: 142 Comm: kworker/0:2 Not tainted 5.5.0-rc2-next-20191220-00175-gc3605715758d-dirty #538 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: events_freezable_power_ thermal_zone_device_check [<c010e5c5>] (unwind_backtrace) from [<c010a1c5>] (show_stack+0x11/0x14) [<c010a1c5>] (show_stack) from [<c0973925>] (dump_stack+0x85/0x94) [<c0973925>] (dump_stack) from [<c011f529>] (__warn+0xc1/0xc4) [<c011f529>] (__warn) from [<c011f7e9>] (warn_slowpath_fmt+0x61/0x78) [<c011f7e9>] (warn_slowpath_fmt) from [<c042497d>] (__list_del_entry_valid+0x45/0xac) [<c042497d>] (__list_del_entry_valid) from [<c047a87f>] (tegra_dma_tasklet+0x5b/0x154) [<c047a87f>] (tegra_dma_tasklet) from [<c0124799>] (tasklet_action_common.constprop.0+0x41/0x7c) [<c0124799>] (tasklet_action_common.constprop.0) from [<c01022ab>] (__do_softirq+0xd3/0x2a8) [<c01022ab>] (__do_softirq) from [<c0124683>] (irq_exit+0x7b/0x98) [<c0124683>] (irq_exit) from [<c0168c19>] (__handle_domain_irq+0x45/0x80) [<c0168c19>] (__handle_domain_irq) from [<c043e429>] (gic_handle_irq+0x45/0x7c) [<c043e429>] (gic_handle_irq) from [<c0101aa5>] (__irq_svc+0x65/0x94) Exception stack(0xde2ebb90 to 0xde2ebbd8) Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200209163356.6439-2-digetx@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25drm/mediatek: Handle component type MTK_DISP_OVL_2L correctlyPhong LE
The larb device remains NULL if the type is MTK_DISP_OVL_2L. A kernel panic is raised when a crtc uses mtk_smi_larb_get or mtk_smi_larb_put. Fixes: b17bdd0d7a73 ("drm/mediatek: add component OVL_2L0") Signed-off-by: Phong LE <ple@baylibre.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2020-02-24blk-mq: insert passthrough request into hctx->dispatch directlyMing Lei
For some reason, device may be in one situation which can't handle FS request, so STS_RESOURCE is always returned and the FS request will be added to hctx->dispatch. However passthrough request may be required at that time for fixing the problem. If passthrough request is added to scheduler queue, there isn't any chance for blk-mq to dispatch it given we prioritize requests in hctx->dispatch. Then the FS IO request may never be completed, and IO hang is caused. So passthrough request has to be added to hctx->dispatch directly for fixing the IO hang. Fix this issue by inserting passthrough request into hctx->dispatch directly together withing adding FS request to the tail of hctx->dispatch in blk_mq_dispatch_rq_list(). Actually we add FS request to tail of hctx->dispatch at default, see blk_mq_request_bypass_insert(). Then it becomes consistent with original legacy IO request path, in which passthrough request is always added to q->queue_head. Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-24Merge tag 'mac80211-for-net-2020-02-24' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg ==================== A few fixes: * remove a double mutex-unlock * fix a leak in an error path * NULL pointer check * include if_vlan.h where needed * avoid RCU list traversal when not under RCU ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24audit: always check the netlink payload length in audit_receive_msg()Paul Moore
This patch ensures that we always check the netlink payload length in audit_receive_msg() before we take any action on the payload itself. Cc: stable@vger.kernel.org Reported-by: syzbot+399c44bf1f43b8747403@syzkaller.appspotmail.com Reported-by: syzbot+e4b12d8d202701f08b6d@syzkaller.appspotmail.com Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-02-24riscv: adjust the indentZong Li
Adjust the indent to match Linux coding style. Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-24riscv: allocate a complete page size for each page tableZong Li
Each page table should be created by allocating a complete page size for it. Otherwise, the content of the page table would be corrupted somewhere through memory allocation which allocates the memory at the middle of the page table for other use. Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-24ASoC: Intel: Skylake: Fix available clock counter incrementationAmadeusz Sławiński
Incrementation of avail_clk_cnt was incorrectly moved to error path. Put it back to success path. Fixes: 6ee927f2f01466 ('ASoC: Intel: Skylake: Fix NULL ptr dereference when unloading clk dev') Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200224125202.13784-1-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-12 02:41:36 +0000