summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-08-06Blackfin: add EVT_OVERRIDE/IPRIO core MMR helpersMike Frysinger
These were partially defined, so fill out the def/cdef pieces properly. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: add support for dynamic ftraceMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: add support for LZO compressed kernelsMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: portmux: fix peripheral map overflow when requesting pinsMichael Hennerich
Some processors have groups of pins that aren't an even number of 16. This causes the array size calculation to under count the number of needed entries due to integer truncation. So on the BF51x, while we should have 3 bitmaps (41 / 16), we end up with 2 and pin requests for the 3rd bank end up scribbling over the top of the GPIO IRQ array. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: document SPI CS limitations with CPHA=0Michael Hennerich
With the Blackfin on-chip SPI peripheral, there is some logic tied to the CPHA bit whether the Slave Select Line is controlled by hardware (CPHA=0) or controlled by software (CPHA=1). However, the Linux SPI bus driver assumes that the Slave Select being asserted during the entire SPI transfer. So explain these small details for people who need certain SPI modes with standard CS behavior. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: remove useless and outdated documentationMichael Hennerich
The filesystem and cache files duplicate existing & better documents, and these contain outdated information. So punt them. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: BF51x/BF52x: support GPIO Hysteresis/Schmitt Trigger optionsMichael Hennerich
Newer parts have optional Hysteresis/Schmitt Trigger options to help with dirty signals. So add some kconfig options for tuning this and enable it by default for people. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: gpio/portmux: clean up whitespace corruptionMike Frysinger
Random tabs instead of spaces, mixes of the two, and unicode spaces instead of ascii spaces. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: make sure mmiowb inserts a write barrier with SSYNCMichael Hennerich
Add SSYNC to our implementation of I/O write barrier to ensure ordering of I/O space writes. This will make sure that writes following the barrier will arrive after all previous writes. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: fix DMA/cache bug when resuming from suspend to RAMMichael Hennerich
The dma_memcpy() function takes care of flushing different caches for us. Normally this is what we want, but when resuming from mem, we don't yet have caches enabled. If these functions happen to be placed into L1 mem (which is what we're trying to relocate), then things aren't going to work. So define a non-cache dma_memcpy() variant to utilize in situations like this. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: BF51x: fix handling of PH8 (the "internal" SPI0SEL4 pin)Mike Frysinger
Even though the PH8 pin is only internal to the processor packaging, it can be controlled like any other GPIO pin. Now that we have a proper GPIO define, we can fix the SPI0 CS4 define for the internal SPI flash. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: add a GPIO_DEFAULT_BOOT_SPI_CSMike Frysinger
This is parallel to the existing P_DEFAULT_BOOT_SPI_CS, but in terms of the GPIO value so it can be used with the normal gpio API. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: fix typo in hweight asmMike Frysinger
Run ONES on the incoming value rather than random garbage. This fixes random crashes with some networking code. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: BF51x: fix typo in HWAIT pin defineMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: BF54x: add ifdef protection to gpio headerMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: gpio: unify & clean up reserved map handlingMike Frysinger
The duplicated bit banging logic is getting out of hand, so unify the local API to make management a lot easier. This also makes the code a lot easier to follow. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: allow cache funcs to be in L1 for IFLUSH Anomaly 05000491Mike Frysinger
Anomaly 05000491 says that IFLUSH cannot have certain types of memory stalls triggered before it has completed in order to function correctly. One such condition is that it be in L1 instruction. So add a config option to move it there, default it to on, and throw up a warning when it is turned off and this anomaly exists. Since the anomaly should be worked around, we can drop the older method of calling IFLUSH multiple times. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2010-08-06Blackfin: update anomaly lists to latest public infoMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: merge anomalies 475 and 220 to follow official listsMike Frysinger
Design found that these anomalies had the same root issue, so they've merged 475 into 220. We need to do the same to update to the latest anomaly sheets. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: move MPU anomaly check to common locationMike Frysinger
Keep all anomaly/arch checks in one place to keep logic simple. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: use common EXCEPTION_TABLE() in vmlinux.ldsMike Frysinger
Rather than do our own thing, use what common code provides. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: stub fpregs dumpingMike Frysinger
The Blackfin processor has no FPU, so there are no FPU regs to dump. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: new dynamic bfin read/write mmr helpersMike Frysinger
These are useful when working with C structs of MMRs as the appropriate size is selected based on the given argument. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: punt NFC MMR bitsMike Frysinger
Now that the NFC driver has its own defines, scrub the ones from the global namespace to avoid ugly collisions with common code. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (27 commits) sched: Use correct macro to display sched_child_runs_first in /proc/sched_debug sched: No need for bootmem special cases sched: Revert nohz_ratelimit() for now sched: Reduce update_group_power() calls sched: Update rq->clock for nohz balanced cpus sched: Fix spelling of sibling sched, cpuset: Drop __cpuexit from cpu hotplug callbacks sched: Fix the racy usage of thread_group_cputimer() in fastpath_timer_check() sched: run_posix_cpu_timers: Don't check ->exit_state, use lock_task_sighand() sched: thread_group_cputime: Simplify, document the "alive" check sched: Remove the obsolete exit_state/signal hacks sched: task_tick_rt: Remove the obsolete ->signal != NULL check sched: __sched_setscheduler: Read the RLIMIT_RTPRIO value lockless sched: Fix comments to make them DocBook happy sched: Fix fix_small_capacity powerpc: Exclude arch_sd_sibiling_asym_packing() on UP powerpc: Enable asymmetric SMT scheduling on POWER7 sched: Add asymmetric group packing option for sibling domain sched: Fix capacity calculations for SMT4 sched: Change nohz idle load balancing logic to push model ...
2010-08-06Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (162 commits) tracing/kprobes: unregister_trace_probe needs to be called under mutex perf: expose event__process function perf events: Fix mmap offset determination perf, powerpc: fsl_emb: Restore setting perf_sample_data.period perf, powerpc: Convert the FSL driver to use local64_t perf tools: Don't keep unreferenced maps when unmaps are detected perf session: Invalidate last_match when removing threads from rb_tree perf session: Free the ref_reloc_sym memory at the right place x86,mmiotrace: Add support for tracing STOS instruction perf, sched migration: Librarize task states and event headers helpers perf, sched migration: Librarize the GUI class perf, sched migration: Make the GUI class client agnostic perf, sched migration: Make it vertically scrollable perf, sched migration: Parameterize cpu height and spacing perf, sched migration: Fix key bindings perf, sched migration: Ignore unhandled task states perf, sched migration: Handle ignored migrate out events perf: New migration tool overview tracing: Drop cpparg() macro perf: Use tracepoint_synchronize_unregister() to flush any pending tracepoint call ... Fix up trivial conflicts in Makefile and drivers/cpufreq/cpufreq.c
2010-08-06Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: Revert "net: Make accesses to ->br_port safe for sparse RCU" mce: convert to rcu_dereference_index_check() net: Make accesses to ->br_port safe for sparse RCU vfs: add fs.h to define struct file lockdep: Add an in_workqueue_context() lockdep-based test function rcu: add __rcu API for later sparse checking rcu: add an rcu_dereference_index_check() tree/tiny rcu: Add debug RCU head objects mm: remove all rcu head initializations fs: remove all rcu head initializations, except on_stack initializations powerpc: remove all rcu head initializations
2010-08-06Merge branch 'core-iommu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86/amd-iommu: Export cache-coherency capability iommu-api: Extension to check for interrupt remapping x86/amd-iommu: Use for_each_pci_dev()
2010-08-06Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_fsl,mv,nv: prepare for NCQ command completion update ata: Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used) libata: more PCI IDs for jmicron controllers ata_piix: fix locking around SIDPR access [libata] update blacklist for new hyphenated pattern ranges (v2) libata: allow hyphenated pattern ranges ata_generic: drop hard coded DMA force logic for CENATEK [libata] ahci: Fix warning: comparison between 'enum <anonymous>' and 'enum <anonymous>' [libata] add ATA_CMD_DSM to ata_get_cmd_descript [libata] Add Samsung PATA controller driver, pata_samsung_cf [libata] Add 460EX on-chip SATA driver, sata_dwc_460ex libata: reduce blacklist size even more (v2) libata: reduce blacklist size (v2) libata: glob_match for ata_device_blacklist (v2) ahci_platform: Remove unneeded ahci_driver.probe assignment ahci_platform: Provide for vendor specific init
2010-08-06SCSI: remove fake "address-of" expressionAlan Stern
Fake "address-of" expressions that evaluate to NULL generally confuse readers and can provoke compiler warnings. This patch (as1411) removes one such fake expression, using an "#ifdef" in its place. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-06kconfig: fix make oldconfigSam Ravnborg
Linus wrote: This seems to make "make oldconfig" a _lot_ more verbose than it used to be. In a very annoying way. I just did a quick git bisect. It's introduced by commit 4062f1a4c030 ("kconfig: use long options in conf") by Sam Ravnborg. Apparently that thing is totally buggy, and doesn't just change the option names, but actively breaks them. The old behaviour (from years ago) were reintroduced by accident. Fix this so we are back to the version that are silent if there is nothing to ask about. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-06Fix init ordering of /dev/console vs callers of modprobeDavid Howells
Make /dev/console get initialised before any initialisation routine that invokes modprobe because if modprobe fails, it's going to want to open /dev/console, presumably to write an error message to. The problem with that is that if the /dev/console driver is not yet initialised, the chardev handler will call request_module() to invoke modprobe, which will fail, because we never compile /dev/console as a module. This will lead to a modprobe loop, showing the following in the kernel log: request_module: runaway loop modprobe char-major-5-1 request_module: runaway loop modprobe char-major-5-1 request_module: runaway loop modprobe char-major-5-1 request_module: runaway loop modprobe char-major-5-1 request_module: runaway loop modprobe char-major-5-1 This can happen, for example, when the built in md5 module can't find the built in cryptomgr module (because the latter fails to initialise). The md5 module comes before the call to tty_init(), presumably because 'crypto' comes before 'drivers' alphabetically. Fix this by calling tty_init() from chrdev_init(). Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-06KEYS: request_key() should return -ENOKEY if the constructed key is negativeDavid Howells
request_key() should return -ENOKEY if the key it constructs has been negatively instantiated. Without this, request_key() can return an unusable key to its caller, and if the caller then does key_validate() that won't catch the problem. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-06mxc_nand: Add v3 (i.MX51) SupportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mxc_nand: support 8bit eccSascha Hauer
Nand devices with at least 26 bytes of oob data per 512 byte block can have 8bit ecc on v2 type controllers. This is currently not tested, but at least this patch puts the ECC_MODE bit into a well defined state. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mxc_nand: fix correct_data functionSascha Hauer
The v2 controller has a totally different mechanism to check whether the data we read had ecc errors or not. Implement this. The mechanism in the v2 controller happens to be identical to the v3 controller. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mxc_nand: add V1_V2 namespace to registersSascha Hauer
This prepares the driver for v3 support. The v3 controller has a completely different register layout, so add a V1_V2_ namespace to the register defines to avoid confusion with the v3 regs. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mxc_nand: factor out a check_int functionSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mxc_nand: make some internally used functions overwriteableSascha Hauer
This patch prepares the driver to add v3 controller support later. The v3 controller is basically the same controller as v1 and v2, but with a completely different register layout. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mxc_nand: rework get_dev_statusSascha Hauer
We save/restore the value in the buffer anyway, so it makes no difference whether we use main_area0 or main_area1. So, we can use main_area0 and remove main_area1 from the driver which is otherwise unused. Also, clean up the comments in get_dev_status. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mxc_nand: remove 0xe00 offset from registersSascha Hauer
Add the offset to the register base instead. This is done in preparation for v3 controller support. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: denali: Add multi connected NAND supportChuanxiao Dong
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: denali: Remove set_ecc_config functionChuanxiao Dong
set_ecc_config function only set ECC_CORRECTION register, so move register setting to probe function. Since controller only support 15bit and 8bit ecc correction, updated nand ecc layout information. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: denali: Remove unuseful code in get_xx_nand_para functionsChuanxiao Dong
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: denali: Remove device_info_tag structureChuanxiao.Dong
Hi David, I sent 4 patches using my intel email account. If there is any problem about the format of these patches, I will resend them after I arrived at home by using my gmail account, and I will keep on using gmail account to send patches. Thanks. >From 242e3bf5e17f54b1df8cf285154a7c7a61ff62e9 Mon Sep 17 00:00:00 2001 From: Chuanxiao Dong <chuanxiao.dong@intel.com> Date: Fri, 6 Aug 2010 15:29:41 +0800 Subject: [PATCH 1/4] mtd: denali: Remove device_info_tag structure. Most of the variables in this structure are useless, so just remove this structure and relevant codes. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06Merge branch 'master' into for-linusChris Metcalf
2010-08-06mtd: m25p80: add support for the Winbond W25Q32 SPI flash chipGabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-08-06mtd: m25p80: add support for the Intel/Numonyx {16,32,64}0S33B SPI flash chipsGabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: m25p80: add support for the EON EN25P{32, 64} SPI flash chipsGabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: cfi_cmdset_0002: consider version 1.4 as a valid primary extension versionGuillaume LECERF
The Spansion S29WS-P device family uses CFI version 1.4 [1]. Consider it as a valid version. [1] http://www.spansion.com/Support/Datasheets/s29ws-p_00_a12_e.pdf Signed-off-by: Guillaume LECERF <glecerf@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
generated by cgit (git 2.34.1) at 2025-09-11 17:23:59 +0000