summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-08-03net: dsa: bcm_sf2: Disable learning while in WoLFlorian Fainelli
When we are in Wake-on-LAN, we operate with the host sofware not running a network stack, so we want to the switch to flood packets in order to cause a system wake-up when matching specific filters (unicast or multicast). This was not necessary before since we supported Magic Packet which are targeting a broadcast MAC address which the switch already floods. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03net: dsa: bcm_sf2: Allow targeting CPU ports for CFP rulesFlorian Fainelli
ds->enabled_port_mask only contains a bitmask of user-facing enabled ports, we also need to allow programming CFP rules that target CPU ports (e.g: ports 5 and 8). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03netfilter: nft_tproxy: Add missing config checkMáté Eckl
A config check was missing form the code when using nf_defrag_ipv6_enable with NFT_TPROXY != n and NF_DEFRAG_IPV6 = n and this caused the following error: ../net/netfilter/nft_tproxy.c: In function 'nft_tproxy_init': ../net/netfilter/nft_tproxy.c:237:3: error: implicit declaration of function +'nf_defrag_ipv6_enable' [-Werror=implicit-function-declaration] err = nf_defrag_ipv6_enable(ctx->net); This patch adds a check for NF_TABLES_IPV6 when NF_DEFRAG_IPV6 is selected by Kconfig. Reported-by: Randy Dunlap <rdunlap@infradead.org> Fixes: 4ed8eb6570a4 ("netfilter: nf_tables: Add native tproxy support") Signed-off-by: Máté Eckl <ecklm94@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-08-03Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fix from Jason Gunthorpe: "One bug for missing user input validation: refuse invalid port numbers in the modify_qp system call" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/uverbs: Expand primary and alt AV port checks
2018-08-03Merge tag 'for-linus-20180803' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fix from Jens Axboe: "Just a single fix, from Ming, fixing a regression in this cycle where the busy tag iteration was changed to only calling the callback function for requests that are started. We really want all non-free requests. This fixes a boot regression on certain VM setups" * tag 'for-linus-20180803' of git://git.kernel.dk/linux-block: blk-mq: fix blk_mq_tagset_busy_iter
2018-08-03Merge tag 'nfs-for-4.18-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfix from Trond Myklebust: "Fix a NFSv4 file locking regression" * tag 'nfs-for-4.18-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: Fix _nfs4_do_setlk()
2018-08-03Merge tag 'powerpc-4.18-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One fix for a regression in a recent TLB flush optimisation, which caused us to incorrectly not send TLB invalidations to coprocessors. Thanks to Frederic Barrat, Nicholas Piggin, Vaibhav Jain" * tag 'powerpc-4.18-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s/radix: Fix missing global invalidations when removing copro
2018-08-03Merge tag 'drm-fixes-2018-08-03' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Nothing too major at this late stage: - adv7511: reset fix - vc4: scaling fix - two atomic core fixes - one legacy core error handling fix I had a bunch of driver fixes from hdlcd but I think I'll leave them for -next at this point" * tag 'drm-fixes-2018-08-03' of git://anongit.freedesktop.org/drm/drm: drm/vc4: Reset ->{x, y}_scaling[1] when dealing with uniplanar formats drm/atomic: Initialize variables in drm_atomic_helper_async_check() to make gcc happy drm/atomic: Check old_plane_state->crtc in drm_atomic_helper_async_check() drm: re-enable error handling drm/bridge: adv7511: Reset registers on hotplug
2018-08-03Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "Fix a memory corruption in the padlock-aes driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: padlock-aes - Fix Nano workaround data corruption
2018-08-03Merge branch 'l2tp-mtu'David S. Miller
Guillaume Nault says: ==================== l2tp: sanitise MTU handling on sessions Most of the code handling sessions' MTU has no effect. The ->mtu field in struct l2tp_session might be used at session creation time, but neither PPP nor Ethernet pseudo-wires take updates into account. L2TP sessions don't have a concept of MTU, which is the reason why ->mtu is mostly ignored. MTU should remain a network device thing. Therefore this patch set does not try to propagate/update ->mtu to/from the device. That would complicate the code unnecessarily. Instead this field and the associated ioctl commands and netlink attributes are removed. Patch #1 defines l2tp_tunnel_dst_mtu() in order to simplify the following patches. Then patches #2 and #3 remove MTU handling from PPP and Ethernet pseudo-wires respectively. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03l2tp: ignore L2TP_ATTR_MTUGuillaume Nault
This attribute's handling is broken. It can only be used when creating Ethernet pseudo-wires, in which case its value can be used as the initial MTU for the l2tpeth device. However, when handling update requests, L2TP_ATTR_MTU only modifies session->mtu. This value is never propagated to the l2tpeth device. Dump requests also return the value of session->mtu, which is not synchronised anymore with the device MTU. The same problem occurs if the device MTU is properly updated using the generic IFLA_MTU attribute. In this case, session->mtu is not updated, and L2TP_ATTR_MTU will report an invalid value again when dumping the session. It does not seem worthwhile to complexify l2tp_eth.c to synchronise session->mtu with the device MTU. Even the ip-l2tp manpage advises to use 'ip link' to initialise the MTU of l2tpeth devices (iproute2 does not handle L2TP_ATTR_MTU at all anyway). So let's just ignore it entirely. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03l2tp: simplify MTU handling in l2tp_pppGuillaume Nault
The value of the session's .mtu field, as defined by pppol2tp_connect() or pppol2tp_session_create(), is later overwritten by pppol2tp_session_init() (unless getting the tunnel's socket PMTU fails). This field is then only used when setting the PPP channel's MTU in pppol2tp_connect(). Furthermore, the SIOC[GS]IFMTU ioctls only act on the session's .mtu without propagating this value to the PPP channel, making them useless. This patch initialises the PPP channel's MTU directly and ignores the session's .mtu entirely. MTU is still computed by subtracting the PPPOL2TP_HEADER_OVERHEAD constant. It is not optimal, but that doesn't really matter: po->chan.mtu is only used when the channel is part of a multilink PPP bundle. Running multilink PPP over packet switched networks is certainly not going to be efficient, so not picking the best MTU does not harm (in the worst case, packets will just be fragmented by the underlay). The SIOC[GS]IFMTU ioctls are removed entirely (as opposed to simply ignored), because these ioctls commands are part of the requests that should be handled generically by the socket layer. PX_PROTO_OL2TP was the only socket type abusing these ioctls. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03l2tp: define l2tp_tunnel_dst_mtu()Guillaume Nault
Consolidate retrieval of tunnel's socket mtu in order to simplify l2tp_eth and l2tp_ppp a bit. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03Merge branch 'hns3-next'David S. Miller
Salil Mehta says: ==================== Some important fixes for HNS3 driver This patch presents some important fixes related to MSIX allocation in HNS3 driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03net: hns3: Refine the MSIX allocation for PFJian Shen
The offset of msix number for roce is different between different revision id. We should get it from firmware, instead of a fix value. This patch refines the msix allocation, make it compatible. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03net: hns3: Fix MSIX allocation issue for VFJian Shen
The msix number for vf is different, depends on the max vf number. Futherly if the vf supports roce, the offset of msix is not fixed. It's incorrect to fix the msix number to 33. This patch fixes it by querying the msix number from firmware, and adjusting it with roce support. Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03netfilter: cttimeout: Make NF_CT_NETLINK_TIMEOUT depend on NF_CONNTRACK_TIMEOUTHarsha Sharma
With this, remove ifdef for CONFIG_NF_CONNTRACK_TIMEOUT in nfnetlink_cttimeout. This is also required for moving ctnl_untimeout from nfnetlink_cttimeout to nf_conntrack_timeout. Signed-off-by: Harsha Sharma <harshasharmaiitr@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-08-03netfilter: nf_tables: remove unused variableYueHaibing
Variable 'ext' is being assigned but are never used hence they are unused and can be removed. Cleans up clang warnings: net/netfilter/nf_tables_api.c:4032:28: warning: variable ‘ext’ set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-08-03rxrpc: Reuse SKCIPHER_REQUEST_ON_STACK bufferKees Cook
The use of SKCIPHER_REQUEST_ON_STACK() will trigger FRAME_WARN warnings (when less than 2048) once the VLA is no longer hidden from the check: net/rxrpc/rxkad.c:398:1: warning: the frame size of 1152 bytes is larger than 1024 bytes [-Wframe-larger-than=] net/rxrpc/rxkad.c:242:1: warning: the frame size of 1152 bytes is larger than 1024 bytes [-Wframe-larger-than=] This passes the initial SKCIPHER_REQUEST_ON_STACK allocation to the leaf functions for reuse. Two requests allocated on the stack is not needed when only one is used at a time. Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03net: sched: fix flush on non-existing chainJiri Pirko
User was able to perform filter flush on chain 0 even if it didn't have any filters in it. With the patch that avoided implicit chain 0 creation, this changed. So in case user wants filter flush on chain which does not exist, just return success. There's no reason for non-0 chains to behave differently than chain 0, so do the same for them. Reported-by: Ido Schimmel <idosch@mellanox.com> Fixes: f71e0ca4db18 ("net: sched: Avoid implicit chain 0 creation") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03bnxt_en: combine 'else if' and 'else' into single branchYueHaibing
The else-if branch and else branch set mac_ok to true similarly, so combine the two into single else branch. Also add comments to explain the two conditions, which from Michael Chan and Vasundhara Volam. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03netfilter: nf_tables: flow event notifier must use transaction mutexFlorian Westphal
Fixes: f102d66b335a4 ("netfilter: nf_tables: use dedicated mutex to guard transactions") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-08-03netfilter: nfnetlink_osf: rename nf_osf header file to nfnetlink_osfFernando Fernandez Mancera
The first client of the nf_osf.h userspace header is nft_osf, coming in this batch, rename it to nfnetlink_osf.h as there are no userspace clients for this yet, hence this looks consistent with other nfnetlink subsystem. Suggested-by: Jan Engelhardt <jengelh@inai.de> Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-08-03netfilter: nf_osf: move nf_osf_fingers to non-uapi header fileFernando Fernandez Mancera
All warnings (new ones prefixed by >>): >> ./usr/include/linux/netfilter/nf_osf.h:73: userspace cannot reference function or variable defined in the kernel Fixes: f9324952088f ("netfilter: nfnetlink_osf: extract nfnetlink_subsystem code from xt_osf.c") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-08-03netfilter: use kvmalloc_array to allocate memory for hashtableLi RongQing
nf_ct_alloc_hashtable is used to allocate memory for conntrack, NAT bysrc and expectation hashtable. Assuming 64k bucket size, which means 7th order page allocation, __get_free_pages, called by nf_ct_alloc_hashtable, will trigger the direct memory reclaim and stall for a long time, when system has lots of memory stress so replace combination of __get_free_pages and vzalloc with kvmalloc_array, which provides a overflow check and a fallback if no high order memory is available, and do not retry to reclaim memory, reduce stall and remove nf_ct_free_hashtable, since it is just a kvfree Signed-off-by: Zhang Yu <zhangyu31@baidu.com> Signed-off-by: Wang Li <wangli39@baidu.com> Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-08-03nohz: Fix missing tick reprogram when interrupting an inline softirqFrederic Weisbecker
The full nohz tick is reprogrammed in irq_exit() only if the exit is not in a nesting interrupt. This stands as an optimization: whether a hardirq or a softirq is interrupted, the tick is going to be reprogrammed when necessary at the end of the inner interrupt, with even potential new updates on the timer queue. When soft interrupts are interrupted, it's assumed that they are executing on the tail of an interrupt return. In that case tick_nohz_irq_exit() is called after softirq processing to take care of the tick reprogramming. But the assumption is wrong: softirqs can be processed inline as well, ie: outside of an interrupt, like in a call to local_bh_enable() or from ksoftirqd. Inline softirqs don't reprogram the tick once they are done, as opposed to interrupt tail softirq processing. So if a tick interrupts an inline softirq processing, the next timer will neither be reprogrammed from the interrupting tick's irq_exit() nor after the interrupted softirq processing. This situation may leave the tick unprogrammed while timers are armed. To fix this, simply keep reprogramming the tick even if a softirq has been interrupted. That can be optimized further, but for now correctness is more important. Note that new timers enqueued in nohz_full mode after a softirq gets interrupted will still be handled just fine through self-IPIs triggered by the timer code. Reported-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: stable@vger.kernel.org # 4.14+ Link: https://lkml.kernel.org/r/1533303094-15855-1-git-send-email-frederic@kernel.org
2018-08-03genirq: Make force irq threading setup more robustThomas Gleixner
The support of force threading interrupts which are set up with both a primary and a threaded handler wreckaged the setup of regular requested threaded interrupts (primary handler == NULL). The reason is that it does not check whether the primary handler is set to the default handler which wakes the handler thread. Instead it replaces the thread handler with the primary handler as it would do with force threaded interrupts which have been requested via request_irq(). So both the primary and the thread handler become the same which then triggers the warnon that the thread handler tries to wakeup a not configured secondary thread. Fortunately this only happens when the driver omits the IRQF_ONESHOT flag when requesting the threaded interrupt, which is normaly caught by the sanity checks when force irq threading is disabled. Fix it by skipping the force threading setup when a regular threaded interrupt is requested. As a consequence the interrupt request which lacks the IRQ_ONESHOT flag is rejected correctly instead of silently wreckaging it. Fixes: 2a1d3ab8986d ("genirq: Handle force threading of irqs with primary and thread handler") Reported-by: Kurt Kanzenbach <kurt.kanzenbach@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Kurt Kanzenbach <kurt.kanzenbach@linutronix.de> Cc: stable@vger.kernel.org
2018-08-03Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990Balakrishna Godavarthi
Add support to set voltage/current of various regulators to power up/down Bluetooth chip wcn3990. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: btqca: Add wcn3990 firmware download support.Balakrishna Godavarthi
This patch enables the RAM and NV patch download for wcn3990. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: hci_qca: Enable 3.2 Mbps operating speed.Balakrishna Godavarthi
Enable Qualcomm chips to operate at 3.2Mbps. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: hci_qca: Add wrapper functions for setting UART speedBalakrishna Godavarthi
In function qca_setup, we set initial and operating speeds for Qualcomm Bluetooth SoC's. This block of code is common across different Qualcomm Bluetooth SoC's. Instead of duplicating the code, created a wrapper function to set the speeds. So that future coming SoC's can use these wrapper functions to set speeds. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: btqca: Redefine qca_uart_setup() to generic function.Balakrishna Godavarthi
Redefinition of qca_uart_setup will help future Qualcomm Bluetooth SoC, to use the same function instead of duplicating the function. Added new arguments soc_type and soc_ver to the functions. These arguments will help to decide type of firmware files to be loaded into Bluetooth chip. soc_type holds the Bluetooth chip connected to APPS processor. soc_ver holds the Bluetooth chip version. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: btqca: Rename ROME specific functions to generic functionsBalakrishna Godavarthi
Some of the QCA BTSoC ROME functions, are used for different versions or different make of BTSoC's. Instead of duplicating the same functions for new chip, update names of the functions that are used for both chips to keep this generic and would help in future when we would have new BT SoC. To have generic text in logs updated from ROME to QCA where ever possible. This avoids confusion to user, when using the future Qualcomm Bluetooth SoC's. Updated BT_DBG, BT_ERR and BT_INFO with bt_dev_dbg, bt_dev_err and bt_dev_info where ever applicable. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03dt-bindings: net: bluetooth: Add device tree bindings for QTI chip wcn3990Balakrishna Godavarthi
This patch enables regulators for the Qualcomm Bluetooth wcn3990 controller. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: hci_h5: Add support for enable and device-wake GPIOsHans de Goede
Add support for the enable and device-wake GPIOs used on ACPI enumerated RTL8723BS devices. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: hci_h5: Add support for the RTL8723BSJeremy Cline
Implement support for the RTL8723BS chip. Signed-off-by: Jeremy Cline <jeremy@jcline.org> [hdegoede@redhat.com: Port from bt3wire.c to hci_h5.c, drop broken GPIO code] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: hci_h5: Add vendor setup, open, and close callbacksJeremy Cline
Allow vendor-specific setup, open, and close functions to be defined. Signed-off-by: Jeremy Cline <jeremy@jcline.org> [hdegoede@redhat.com: Port from bt3wire.c to hci_h5.c, drop dt support] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: hci_h5: Add support for serdev enumerated devicesHans de Goede
Add basic support for serdev enumerated devices, note sine this does not (yet) declare any of / ACPI ids to bind to atm this is a nop. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: btrtl: Add support for a config filename postfixHans de Goede
The contents of the rtl_bt/rtlXXXX_config.bin file may be board specific allow the caller of btrtl_initialize to specify a postfix identifying the board, which if specified will make btrtl_initialize look for rtl_bt/rtlXXXX_config-<postfix>.bin instead. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: btrtl: add support for the RTL8723BS and RTL8723DS chipsMartin Blumenstingl
The Realtek RTL8723BS and RTL8723DS chipsets are SDIO wifi chips. They also contain a Bluetooth module which is connected via UART to the host. Realtek's userspace initialization tool (rtk_hciattach) differentiates these two via the HCI version and revision returned by the HCI_OP_READ_LOCAL_VERSION command. Additionally we apply these checks only the for UART devices. Everything else is assumed to be a "RTL8723B" which was originally supported by the driver (communicating via USB). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jeremy Cline <jeremy@jcline.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: btrtl: add support for retrieving the UART settingsMartin Blumenstingl
The UART settings are embedded in the config blob. This has to be parsed to successfully initialize the Bluetooth part of the RTL8723BS (which is an SDIO chip, but the Bluetooth part is connected via UART). The Realtek "rtl8723bs_bt" and "rtl8723ds_bt" userspace Bluetooth UART initialization tools (rtk_hciattach) use the following sequence: - send H5 sync pattern (already supported by hci_h5) - get LMP version (already supported by btrtl) - get ROM version (already supported by btrtl) - load the firmware and config for the current chipset (already supported by btrtl) - read UART settings from the config blob (part of this patch) - send UART settings via a vendor command to the device (which changes the baudrate of the device and enables or disables flow control depending on the config) - change the baudrate and flow control settings on the host - send the firmware and config blob to the device (already supported by btrtl) Sending the last firmware and config blob download command (rtl_download_cmd) fails if the UART settings are not updated beforehand. This is presumably because the device applies the config right after the firmware and config blob download - which means that at this point the host is using different UART settings than the device (which will obviously result in non-working communication). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jeremy Cline <jeremy@jcline.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: btrtl: Use rtl_dev_err and rtl_dev_infoHans de Goede
Consistently use rtl_dev_err and rtl_dev_info everywhere for messages. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: btrtl: split the device initialization into smaller partsMartin Blumenstingl
This prepares the btrtl code so it can be used to initialize Bluetooth modules connected via UART (these are found for example on the RTL8723BS and RTL8723DS SDIO chips, which come with an embedded UART Bluetooth module). The Realtek "rtl8723bs_bt" and "rtl8723ds_bt" userspace Bluetooth UART initialization tools (rtk_hciattach) use the following sequence: 1) send H5 sync pattern (already supported by hci_h5) 2) get LMP version (already supported by btrtl) 3) get ROM version (already supported by btrtl) 4) load the firmware and config for the current chipset (already supported by btrtl) 5) read UART settings from the config blob (currently not supported) 6) send UART settings via a vendor command to the device (which changes the baudrate of the device and enables or disables flow control depending on the config) 7) change the baudrate and flow control settings on the host 8) send the firmware and config blob to the device (already supported by btrtl) The main reason why the initialization has to be split is step #7. This requires changes to the underlying "bus", which should be kept outside of the "generic" btrtl driver. The idea for this split is borrowed from the btbcm driver but adjusted where needed (the btrtl driver for example needs two blobs: firmware and config, while the btbcm only needs one). This also prepares the code for step #5 (parsing the config blob) by centralizing the code which loads the firmware and config blobs and storing the result in the new struct btrtl_device_info. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jeremy Cline <jeremy@jcline.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: btrtl: add MODULE_FIRMWARE declarationsMartin Blumenstingl
This makes the firmware names show up in modinfo. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jeremy Cline <jeremy@jcline.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: btusb: Use bt_dev_err for Intel firmware loading errorsMarcel Holtmann
Replace the BT_ERR functions with bt_dev_err to get a consistent error printout that always prefixes the HCI device identifier. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2018-08-03selftests/bpf: update test_lwt_seg6local.sh according to iproute2Mathieu Xhonneux
The shell file for test_lwt_seg6local contains an early iproute2 syntax for installing a seg6local End.BPF route. iproute2 support for this feature has recently been upstreamed, but with an additional keyword required. This patch updates test_lwt_seg6local.sh to the definitive iproute2 syntax Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-03Bluetooth: btusb: Release RF resource on BT shutdownAmit K Bag
Issue description: Intel 7265 shares the same RF with Wifi and BT. In the shutdown scenario turn off BT, followed by turn WiFi off and on causing error in RF calibration in WiFi Module Solution: before shutdown BT ensure any RF activity to clear by HCI reset command. Reference Logs: ERR kernel: [ 386.193284] iwlwifi 0000:01:00.0: Failed to run INIT calibrations: -5 ERR kernel: [ 386.193298] iwlwifi 0000:01:00.0: Failed to run INIT ucode: -5 ERR kernel: [ 386.193309] iwlwifi 0000:01:00.0: Failed to start RT ucode: -5 Signed-off-by: Amit K Bag <amit.k.bag@intel.com> Singed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03selftests/bpf: fix a typo in map in map testRoman Gushchin
Commit fbeb1603bf4e ("bpf: verifier: MOV64 don't mark dst reg unbounded") revealed a typo in commit fb30d4b71214 ("bpf: Add tests for map-in-map"): BPF_MOV64_REG(BPF_REG_0, 0) was used instead of BPF_MOV64_IMM(BPF_REG_0, 0). I've noticed the problem by running bpf kselftests. Fixes: fb30d4b71214 ("bpf: Add tests for map-in-map") Signed-off-by: Roman Gushchin <guro@fb.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Arthur Fabre <afabre@cloudflare.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-02tools: bpf: fix BTF code added twice to different treesJakub Kicinski
commit 38d5d3b3d5db ("bpf: Introduce BPF_ANNOTATE_KV_PAIR") added to the bpf and net trees what commit 92b57121ca79 ("bpf: btf: export btf types and name by offset from lib") has already added to bpf-next/net-next, but in slightly different location. Remove the duplicates (to fix build of libbpf). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02Merge tag 'media/v4.18-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - a deadlock regression at vsp1 driver - some Remote Controller fixes related to the new BPF filter logic added on it for Kernel 4.18. * tag 'media/v4.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: v4l: vsp1: Fix deadlock in VSPDL DRM pipelines media: rc: read out of bounds if bpf reports high protocol number media: bpf: ensure bpf program is freed on detach media: rc: be less noisy when driver misbehaves
generated by cgit (git 2.34.1) at 2025-09-10 17:17:33 +0000