| Age | Commit message (Collapse) | Author |
|---|
|
Following process will make ubi attaching failed since commit
1b42b1a36fc946 ("ubi: ensure that VID header offset ... size"):
ID="0xec,0xa1,0x00,0x15" # 128M 128KB 2KB
modprobe nandsim id_bytes=$ID
flash_eraseall /dev/mtd0
modprobe ubi mtd="0,2048" # set vid_hdr offset as 2048 (one page)
(dmesg):
ubi0 error: ubi_attach_mtd_dev [ubi]: VID header offset 2048 too large.
UBI error: cannot attach mtd0
UBI error: cannot initialize UBI, error -22
Rework original solution, the key point is making sure
'vid_hdr_shift + UBI_VID_HDR_SIZE < ubi->vid_hdr_alsize',
so we should check vid_hdr_shift rather not vid_hdr_offset.
Then, ubi still support (sub)page aligined VID header offset.
Fixes: 1b42b1a36fc946 ("ubi: ensure that VID header offset ... size")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Tested-by: Nicolas Schichan <nschichan@freebox.fr>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com> # v5.10, v4.19
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
8b/10b encoding needs to add 3% fec overhead into the pbn.
In the Synapcis Cascaded MST hub, the first stage MST branch device
needs the information to determine the timeslot count for the
second stage MST branch device. Missing this overhead will leads to
insufficient timeslot allocation.
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Traditional synaptics hub has one MST branch device without virtual dpcd.
Synaptics cascaded hub has two chained MST branch devices. DSC decoding
is performed via root MST branch device, instead of the second MST branch
device.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Yixin Shen says:
====================
This series allow BPF TCP CCs to write app_limited of struct
tcp_sock. A built-in CC or one from a kernel module is already
able to write to app_limited of struct tcp_sock. Until now,
a BPF CC doesn't have write access to this member of struct
tcp_sock.
v2:
- Merge the test of writing app_limited into the test of
writing sk_pacing. (Martin KaFai Lau)
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Test whether a TCP CC implemented in BPF is allowed to write
app_limited in struct tcp_sock. This is already allowed for
the built-in TCP CC.
Signed-off-by: Yixin Shen <bobankhshen@gmail.com>
Link: https://lore.kernel.org/r/20230329073558.8136-3-bobankhshen@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
A CC that implements tcp_congestion_ops.cong_control() should be able to
write app_limited. A built-in CC or one from a kernel module is already
able to write to this member of struct tcp_sock.
For a BPF program, write access has not been allowed, yet.
Signed-off-by: Yixin Shen <bobankhshen@gmail.com>
Link: https://lore.kernel.org/r/20230329073558.8136-2-bobankhshen@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
alternative dependency"
Conor Dooley <conor.dooley@microchip.com> says:
Here's my attempt at fixing both the use of an FPU on XIP kernels and
the issue that Jason ran into where CONFIG_FPU, which needs the
alternatives frame work for has_fpu() checks, could be enabled without
the alternatives actually being present.
For the former, a "slow" fallback that does not use alternatives is
added to riscv_has_extension_[un]likely() that can be used with XIP.
Obviously, we want to make use of Jisheng's alternatives based approach
where possible, so any users of riscv_has_extension_[un]likely() will
want to make sure that they select RISCV_ALTERNATIVE.
If they don't however, they'll hit the fallback path which (should,
sparing a silly mistake from me!) behave in the same way, thus
succeeding silently. Sounds like a
To prevent "depends on !XIP_KERNEL; select RISCV_ALTERNATIVE" spreading
like the plague through the various places that want to check for the
presence of extensions, and sidestep the potential silent "success"
mentioned above, all users RISCV_ALTERNATIVE are converted from selects
to dependencies, with the option being selected for all !XIP_KERNEL
builds.
I know that the VDSO was a key place that Jisheng wanted to use the new
helper rather than static branches, and I think the fallback path
should not cause issues there.
See the thread at [1] for the prior discussion.
1 - https://lore.kernel.org/linux-riscv/20230128172856.3814-1-jszhang@kernel.org/T/#m21390d570997145d31dd8bb95002fd61f99c6573
[Palmer: merging in the fixes as a branch as there's some features that
depend on it.]
* b4-shazam-merge:
RISC-V: always select RISCV_ALTERNATIVE for non-xip kernels
RISC-V: add non-alternative fallback for riscv_has_extension_[un]likely()
Link: https://lore.kernel.org/r/20230324100538.3514663-1-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Update I2C timing registers based on latest hardware design.
This fix does not break functionality of chips with older design and
existing users will not be affected.
Fixes: 361693697249 ("i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch")
Signed-off-by: Tharun Kumar P <tharunkumar.pasumarthi@microchip.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
When moving switch_to's has_fpu() over to using
riscv_has_extension_likely() rather than static branches, the FPU code
gained a dependency on the alternatives framework.
That dependency has now been removed, as riscv_has_extension_ikely() now
contains a fallback path, using __riscv_isa_extension_available(), but
if CONFIG_RISCV_ALTERNATIVE isn't selected when CONFIG_FPU is, has_fpu()
checks will not benefit from the "fast path" that the alternatives
framework provides.
We want to ensure that alternatives are available whenever
riscv_has_extension_[un]likely() is used, rather than silently falling
back to the slow path, but rather than rely on selecting
RISCV_ALTERNATIVE in the myriad of locations that may use
riscv_has_extension_[un]likely(), select it (almost) always instead by
adding it to the main RISCV config entry.
xip kernels cannot make use of the alternatives framework, so it is not
enabled for those configurations, although this is the status quo.
All current sites that select RISCV_ALTERNATIVE are converted to
dependencies on the option instead. The explicit dependencies on
!XIP_KERNEL can be dropped, as RISCV_ALTERNATIVE is not user selectable.
Fixes: 702e64550b12 ("riscv: fpu: switch has_fpu() to riscv_has_extension_likely()")
Link: https://lore.kernel.org/all/ZBruFRwt3rUVngPu@zx2c4.com/
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20230324100538.3514663-3-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The has_fpu() check, which in turn calls riscv_has_extension_likely(),
relies on alternatives to figure out whether the system has an FPU.
As a result, it will malfunction on XIP kernels, as they do not support
the alternatives mechanism.
When alternatives support is not present, fall back to using
__riscv_isa_extension_available() in riscv_has_extension_[un]likely()
instead stead, which handily takes the same argument, so that kernels
that do not support alternatives can accurately report the presence of
FPU support.
Fixes: 702e64550b12 ("riscv: fpu: switch has_fpu() to riscv_has_extension_likely()")
Link: https://lore.kernel.org/all/ad445951-3d13-4644-94d9-e0989cda39c3@spud/
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20230324100538.3514663-2-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
It was found that commit 7a2127e66a00 ("cpuset: Call
set_cpus_allowed_ptr() with appropriate mask for task") introduced a bug
that corrupted "cpuset.cpus" of a partition root when it was updated.
It is because the tmp->new_cpus field of the passed tmp parameter
of update_parent_subparts_cpumask() should not be used at all as
it contains important cpumask data that should not be overwritten.
Fix it by using tmp->addmask instead.
Also update update_cpumask() to make sure that trialcs->cpu_allowed
will not be corrupted until it is no longer needed.
Fixes: 7a2127e66a00 ("cpuset: Call set_cpus_allowed_ptr() with appropriate mask for task")
Signed-off-by: Waiman Long <longman@redhat.com>
Cc: stable@vger.kernel.org # v6.2+
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Commit 52f04f10b900 ("thermal: intel: int340x: processor_thermal: Fix
deadlock") addressed deadlock issue during user space trip update. But it
missed a case when thermal zone device is disabled when user writes 0.
Call to thermal_zone_device_disable() also causes deadlock as it also
tries to lock tz->lock, which is already claimed by trip_point_temp_store()
in the thermal core code.
Remove call to thermal_zone_device_disable() in the function
sys_set_trip_temp(), which is called from trip_point_temp_store().
Fixes: 52f04f10b900 ("thermal: intel: int340x: processor_thermal: Fix deadlock")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 6.2+ <stable@vger.kernel.org> # 6.2+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 3e453522593d ("md: Free resources in __md_stop") tried to fix
null-ptr-deference for 'active_io' by moving percpu_ref_exit() to
__md_stop(), however, the commit also moving 'writes_pending' to
__md_stop(), and this will cause mdadm tests broken:
BUG: kernel NULL pointer dereference, address: 0000000000000038
Oops: 0000 [#1] PREEMPT SMP
CPU: 15 PID: 17830 Comm: mdadm Not tainted 6.3.0-rc3-next-20230324-00009-g520d37
RIP: 0010:free_percpu+0x465/0x670
Call Trace:
<TASK>
__percpu_ref_exit+0x48/0x70
percpu_ref_exit+0x1a/0x90
__md_stop+0xe9/0x170
do_md_stop+0x1e1/0x7b0
md_ioctl+0x90c/0x1aa0
blkdev_ioctl+0x19b/0x400
vfs_ioctl+0x20/0x50
__x64_sys_ioctl+0xba/0xe0
do_syscall_64+0x6c/0xe0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
And the problem can be reporduced 100% by following test:
mdadm -CR /dev/md0 -l1 -n1 /dev/sda --force
echo inactive > /sys/block/md0/md/array_state
echo read-auto > /sys/block/md0/md/array_state
echo inactive > /sys/block/md0/md/array_state
Root cause:
// start raid
raid1_run
mddev_init_writes_pending
percpu_ref_init
// inactive raid
array_state_store
do_md_stop
__md_stop
percpu_ref_exit
// start raid again
array_state_store
do_md_run
raid1_run
mddev_init_writes_pending
if (mddev->writes_pending.percpu_count_ptr)
// won't reinit
// inactive raid again
...
percpu_ref_exit
-> null-ptr-deference
Before the commit, 'writes_pending' is exited when mddev is freed, and
it's safe to restart raid because mddev_init_writes_pending() already make
sure that 'writes_pending' will only be initialized once.
Fix the prblem by moving 'writes_pending' back, it's a litter hard to find
the relationship between alloc memory and free memory, however, code
changes is much less and we lived with this for a long time already.
Fixes: 3e453522593d ("md: Free resources in __md_stop")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230328094400.1448955-1-yukuai1@huaweicloud.com
|
|
Pull xtensa fixes from Max Filippov:
- fix KASAN report in show_stack
- drop linux-xtensa mailing list from the MAINTAINERS file
* tag 'xtensa-20230327' of https://github.com/jcmvbkbc/linux-xtensa:
MAINTAINERS: xtensa: drop linux-xtensa@linux-xtensa.org mailing list
xtensa: fix KASAN report for show_stack
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs fix from Jaegeuk Kim:
"This fixes a tracepoint field size in f2fs in preparation for stricter
rules for tracing fields"
* tag 'f2fs-fix-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: Fix f2fs_truncate_partial_nodes ftrace event
|
|
This is essentially a backport of iproute2's
commit ed54f76484b5 ("json: fix backslash escape typo in jsonw_puts")
Also added the stdio.h include in json_writer.h to be able to compile
and run the json_writer test as used below).
Before this fix:
$ gcc -D notused -D TEST -I../../include -o json_writer json_writer.c
json_writer.h
$ ./json_writer
{
"Vyatta": {
"url": "http://vyatta.com",
"downloads": 2000000,
"stock": 8.16,
"ARGV": [],
"empty": [],
"NIL": {},
"my_null": null,
"special chars": [
"slash": "/",
"newline": "\n",
"tab": "\t",
"ff": "\f",
"quote": "\"",
"tick": "'",
"backslash": "\n"
]
}
}
After:
$ gcc -D notused -D TEST -I../../include -o json_writer json_writer.c
json_writer.h
$ ./json_writer
{
"Vyatta": {
"url": "http://vyatta.com",
"downloads": 2000000,
"stock": 8.16,
"ARGV": [],
"empty": [],
"NIL": {},
"my_null": null,
"special chars": [
"slash": "/",
"newline": "\n",
"tab": "\t",
"ff": "\f",
"quote": "\"",
"tick": "'",
"backslash": "\\"
]
}
}
Signed-off-by: Manu Bretelle <chantr4@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230329073002.2026563-1-chantr4@gmail.com
|
|
We should not be looking at ctx->rsrc_node and anyhow modifying the node
without holding uring_lock, grabbing references in such a way is not
safe either.
Cc: stable@vger.kernel.org
Fixes: 5106dd6e74ab6 ("io_uring: propagate issue_flags state down to file assignment")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1202ede2d7bb90136e3482b2b84aad9ed483e5d6.1680098433.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The drm_buddy_test KUnit tests verify that returned blocks have sizes
which are powers of two using is_power_of_2(). However, is_power_of_2()
operations on a 'long', but the block size is a u64. So on systems where
long is 32-bit, this can sometimes fail even on correctly sized blocks.
This only reproduces randomly, as the parameters passed to the buddy
allocator in this test are random. The seed 0xb2e06022 reproduced it
fine here.
For now, just hardcode an is_power_of_2() implementation using
x & (x - 1).
Signed-off-by: David Gow <davidgow@google.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Arunpravin Paneer Selvam <arunpravin.paneerselvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329065532.2122295-2-davidgow@google.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
The drm buddy allocator tests were broken on 32-bit systems, as
rounddown_pow_of_two() takes a long, and the buddy allocator handles
64-bit sizes even on 32-bit systems.
This can be reproduced with the drm_buddy_allocator KUnit tests on i386:
./tools/testing/kunit/kunit.py run --arch i386 \
--kunitconfig ./drivers/gpu/drm/tests drm_buddy
(It results in kernel BUG_ON() when too many blocks are created, due to
the block size being too small.)
This was independently uncovered (and fixed) by Luís Mendes, whose patch
added a new u64 variant of rounddown_pow_of_two(). This version instead
recalculates the size based on the order.
Reported-by: Luís Mendes <luis.p.mendes@gmail.com>
Link: https://lore.kernel.org/lkml/CAEzXK1oghXAB_KpKpm=-CviDQbNaH0qfgYTSSjZgvvyj4U78AA@mail.gmail.com/T/
Signed-off-by: David Gow <davidgow@google.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <arunpravin.paneerselvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329065532.2122295-1-davidgow@google.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
If an IPC4 topology contains an unsupported widget, its .module_info
field won't be set, then sof_ipc4_route_setup() will cause a kernel
Oops trying to dereference it. Add a check for such cases.
Cc: stable@vger.kernel.org # 6.2
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230329113828.28562-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix headset microphone detection on Lenovo ZhaoYang CF4620Z.
[ adjusted to be applicable to the latest tree -- tiwai ]
Signed-off-by: huangwenhui <huangwenhuia@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230328074644.30142-1-huangwenhuia@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The hypervisor supports user-mode NX from Power10.
pseries_vas_dlpar_cpu() is called from lparcfg_write() to update VAS
windows for DLPAR event in shared processor mode and the kernel gets
-ENOTSUPP for HCALLs if the user-mode NX is not supported. The current
VAS implementation also supports only with Radix page tables. Whereas in
dedicated processor mode, pseries_vas_notifier() is registered only if
the copy/paste feature is enabled. So instead of displaying HCALL error
messages, update VAS capabilities if the copy/paste feature is
available.
This patch ignores updating VAS capabilities in pseries_vas_dlpar_cpu()
and returns success if the copy/paste feature is not enabled. Then
lparcfg_write() completes the processor DLPAR operations without any
failures.
Fixes: 2147783d6bf0 ("powerpc/pseries: Use lparcfg to reconfig VAS windows for DLPAR CPU")
Cc: stable@vger.kernel.org # v6.1+
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1d0e727e7dbd9a28627ef08ca9df9c86a50175e2.camel@linux.ibm.com
|
|
After entering 6.3-rc1 the LLC cacheinfo is not exported on our ACPI
based arm64 server. This is because the LLC cacheinfo is partly reset
when secondary CPUs boot up. On arm64 the primary cpu will allocate
and setup cacheinfo:
init_cpu_topology()
for_each_possible_cpu()
fetch_cache_info() // Allocate cacheinfo and init levels
detect_cache_attributes()
cache_shared_cpu_map_setup()
if (!last_level_cache_is_valid()) // not valid, setup LLC
cache_setup_properties() // setup LLC
On secondary CPU boot up:
detect_cache_attributes()
populate_cache_leaves()
get_cache_type() // Get cache type from clidr_el1,
// for LLC type=CACHE_TYPE_NOCACHE
cache_shared_cpu_map_setup()
if (!last_level_cache_is_valid()) // Valid and won't go to this branch,
// leave LLC's type=CACHE_TYPE_NOCACHE
The last_level_cache_is_valid() use cacheinfo->{attributes, fw_token} to
test it's valid or not, but populate_cache_leaves() will only reset
LLC's type, so we won't try to re-setup LLC's type and leave it
CACHE_TYPE_NOCACHE and won't export it through sysfs.
This patch tries to fix this by not re-populating the cache leaves if
the LLC is valid.
Fixes: 5944ce092b97 ("arch_topology: Build cacheinfo from primary CPU")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20230328114915.33340-1-yangyicong@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The nouveau code used to call drm_fb_helper_initial_config() from
nouveau_fbcon_init() before calling drm_dev_register(). This would
probe all connectors so that drm_connector->status could be used during
backlight registration which runs from nouveau_connector_late_register().
After commit 4a16dd9d18a0 ("drm/nouveau/kms: switch to drm fbdev helpers")
the fbdev emulation code, which now is a drm-client, can only run after
drm_dev_register(). So during backlight registration the connectors are
not probed yet and the drm_connector->status == connected check in
nv50_backlight_init() would now always fail.
Replace the drm_connector->status == connected check with
a drm_helper_probe_detect() == connected check to fix nv_backlight
no longer getting registered because of this.
Fixes: 4a16dd9d18a0 ("drm/nouveau/kms: switch to drm fbdev helpers")
Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/202
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2181941
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230326205433.36485-1-hdegoede@redhat.com
|
|
This modem supports several modes with a class network function
and a number of serial functions, all using ff/00/00
The device ID is the same in all modes.
RNDIS mode
----------
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=0900 Rev= 4.04
S: Manufacturer=Quectel
S: Product=RM500U-CN
S: SerialNumber=0123456789ABCDEF
C:* #Ifs= 7 Cfg#= 1 Atr=c0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
ECM mode
--------
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=0900 Rev= 4.04
S: Manufacturer=Quectel
S: Product=RM500U-CN
S: SerialNumber=0123456789ABCDEF
C:* #Ifs= 7 Cfg#= 1 Atr=c0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
NCM mode
--------
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=0900 Rev= 4.04
S: Manufacturer=Quectel
S: Product=RM500U-CN
S: SerialNumber=0123456789ABCDEF
C:* #Ifs= 7 Cfg#= 1 Atr=c0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0d Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0d Prot=00 Driver=cdc_ncm
E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Reported-by: Andrew Green <askgreen@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
SCI IP on RZ/G2L alike SoCs do not need regshift compared to other SCI
IPs on the SH platform. Currently, it does regshift and configuring Rx
wrongly. Drop adding regshift for RZ/G2L alike SoCs.
Fixes: dfc80387aefb ("serial: sh-sci: Compute the regshift value for SCI ports")
Cc: stable@vger.kernel.org
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230321114753.75038-3-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For serdev framework, tty->dev is a NULL pointer, lpuart_uport_is_active
calling device_may_wakeup() may cause kernel NULL pointer crash, so here
add the NULL pointer check before using it.
Fixes: 4f5cb8c5e915 ("tty: serial: fsl_lpuart: enable wakeup source for lpuart")
Cc: stable <stable@kernel.org>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20230323110923.24581-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
UARTCTRL_SBK is asserted in lpuart32_tx_empty
According to LPUART RM, Transmission Complete Flag becomes 0 if queuing
a break character by writing 1 to CTRL[SBK], so here need to avoid
checking for transmission complete when UARTCTRL_SBK is asserted,
otherwise the lpuart32_tx_empty may never get TIOCSER_TEMT.
Commit 2411fd94ceaa("tty: serial: fsl_lpuart: skip waiting for
transmission complete when UARTCTRL_SBK is asserted") only fix it in
lpuart32_set_termios(), here also fix it in lpuart32_tx_empty().
Fixes: 380c966c093e ("tty: serial: fsl_lpuart: add 32-bit register interface support")
Cc: stable <stable@kernel.org>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20230323054415.20363-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Hans de Goede reported Bluetooth adapters (HCIs) connected over an UART
connection failed due corrupted Rx payload. The problem was narrowed
down to DMA Rx starting on UART_IIR_THRI interrupt. The problem occurs
despite LSR having DR bit set, which is precondition for attempting to
start DMA Rx in the first place.
From a debug patch:
[x.807834] 8250irq: iir=cc lsr+saved=60 received=0/15 ier=0f dma_t/rx/err=0/0/0
[x.808676] 8250irq: iir=c2 lsr+saved=61 received=0/0 ier=0f dma_t/rx/err=0/0/0
[x.808776] 8250irq: iir=cc lsr+saved=60 received=1/12 ier=0d dma_t/rx/err=0/1/0
[x.808870] Bluetooth: hci0: Frame reassembly failed (-84)
In the debug snippet, received field indicates 1 byte was transferred
over DMA and 12 bytes after that with the non-DMA Rx. The sole byte DMA
handled was corrupted (gets zeroed) which leads to the HCI failure.
This problem became apparent after commit e8ffbb71f783 ("serial: 8250:
use THRE & __stop_tx also with DMA") changed Tx stop behavior. Tx stop
is now triggered from a THRI interrupt.
Despite that this problem looks like a HW bug, this fix is not adding
UART_BUG_xx flag to the driver beucase it seems useful in general to
avoid starting DMA when there are only a few bytes to transfer.
Skipping DMA for small transfers avoids the extra overhead DMA incurs.
Thus, don't setup DMA Rx on UART_IIR_THRI but leave it to a subsequent
interrupt which has Rx a related IIR value.
By returning false from handle_rx_dma(), the DMA vs non-DMA decision is
postponed until either UART_IIR_RDI (FIFO threshold worth of bytes
awaiting) or UART_IIR_TIMEOUT (inter-character timeout) triggers at a
later time which allows better to discern whether the number of bytes
warrants starting DMA or not.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Fixes: e8ffbb71f783 ("serial: 8250: use THRE & __stop_tx also with DMA")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230317103034.12881-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The fourth interrupt on SCIF variants with four interrupts (RZ/A1) is
the Break interrupt, not the Transmit End interrupt (like on SCI(g)).
Update the description and interrupt name to fix this.
Fixes: 384d00fae8e51f8f ("dt-bindings: serial: sh-sci: Convert to json-schema")
Cc: stable <stable@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/719d1582e0ebbe3d674e3a48fc26295e1475a4c3.1679046394.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The fourth interrupt on SCI port is transmit end interrupt compared to
the break interrupt on other port types. So, shuffle the interrupts to fix
the transmit end interrupt handler.
Fixes: e1d0be616186 ("sh-sci: Add h8300 SCI")
Cc: stable <stable@kernel.org>
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230317150403.154094-1-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
bias-bus-hold
Add missing common pin configuration properties: input-enabled and
bias-bus-hold.
Fixes: 268e97ccc311 ("dt-bindings: pinctrl: qcom,sm8550-lpass-lpi-pinctrl: add SM8550 LPASS")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230324084127.29362-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
When we set the dual-role port to Host mode, we observed the following
splat:
[ 167.057718] BUG: sleeping function called from invalid context at
include/linux/sched/mm.h:229
[ 167.057872] Workqueue: events tegra_xusb_usb_phy_work
[ 167.057954] Call trace:
[ 167.057962] dump_backtrace+0x0/0x210
[ 167.057996] show_stack+0x30/0x50
[ 167.058020] dump_stack_lvl+0x64/0x84
[ 167.058065] dump_stack+0x14/0x34
[ 167.058100] __might_resched+0x144/0x180
[ 167.058140] __might_sleep+0x64/0xd0
[ 167.058171] slab_pre_alloc_hook.constprop.0+0xa8/0x110
[ 167.058202] __kmalloc_track_caller+0x74/0x2b0
[ 167.058233] kvasprintf+0xa4/0x190
[ 167.058261] kasprintf+0x58/0x90
[ 167.058285] tegra_xusb_find_port_node.isra.0+0x58/0xd0
[ 167.058334] tegra_xusb_find_port+0x38/0xa0
[ 167.058380] tegra_xusb_padctl_get_usb3_companion+0x38/0xd0
[ 167.058430] tegra_xhci_id_notify+0x8c/0x1e0
[ 167.058473] notifier_call_chain+0x88/0x100
[ 167.058506] atomic_notifier_call_chain+0x44/0x70
[ 167.058537] tegra_xusb_usb_phy_work+0x60/0xd0
[ 167.058581] process_one_work+0x1dc/0x4c0
[ 167.058618] worker_thread+0x54/0x410
[ 167.058650] kthread+0x188/0x1b0
[ 167.058672] ret_from_fork+0x10/0x20
The function tegra_xusb_padctl_get_usb3_companion eventually calls
tegra_xusb_find_port and this in turn calls kasprintf which might sleep
and so cannot be called from an atomic context.
Fix this by moving the call to tegra_xusb_padctl_get_usb3_companion to
the tegra_xhci_id_work function where it is really needed.
Fixes: f836e7843036 ("usb: xhci-tegra: Add OTG support")
Cc: stable@vger.kernel.org
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Link: https://lore.kernel.org/r/20230327095548.1599470-1-haotienh@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ModemManger/Apps probing the wwan0xmmrpc0 port for 7560 Modem results in
modem crash.
7560 Modem FW uses the MBIM interface for control command communication
whereas 7360 uses Intel RPC interface so disable wwan0xmmrpc0 port for
7560.
Fixes: d08b0f8f46e4 ("net: wwan: iosm: add rpc interface for xmm modems")
Reported-and-tested-by: Martin <mwolf@adiumentum.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217200
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: Shane Parslow <shaneparslow808@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The HNS3 driver supports Wake-on-LAN, which can wake up
the server from power off state to power on state by magic
packet or magic security packet.
ChangeLog:
v1->v2:
Deleted the debugfs function that overlaps with the ethtool function
from suggestion of Andrew Lunn.
v2->v3:
Return the wol configuration stored in driver,
suggested by Alexander H Duyck.
v3->v4:
Add a helper to go from netdev to the local struct,
suggested by Simon Horman and Jakub Kicinski.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Edward Cree says:
====================
sfc: support TC decap rules
This series adds support for offloading tunnel decapsulation TC rules to
ef100 NICs, allowing matching encapsulated packets to be decapsulated in
hardware and redirected to VFs.
For now an encap match must be on precisely the following fields:
ethertype (IPv4 or IPv6), source IP, destination IP, ipproto UDP,
UDP destination port. This simplifies checking for overlaps in the
driver; the hardware supports a wider range of match fields which
future driver work may expose.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A 'foreign' rule is one for which the net_dev is not the sfc netdevice
or any of its representors. The driver registers indirect flow blocks
for tunnel netdevs so that it can offload decap rules. For example:
tc filter add dev vxlan0 parent ffff: protocol ipv4 flower \
enc_src_ip 10.1.0.2 enc_dst_ip 10.1.0.1 \
enc_key_id 1000 enc_dst_port 4789 \
action tunnel_key unset \
action mirred egress redirect dev $REPRESENTOR
When notified of a rule like this, register an encap match on the IP
and dport tuple (creating an Outer Rule table entry) and insert an MAE
action rule to perform the decapsulation and deliver to the representee.
Moved efx_tc_delete_rule() below efx_tc_flower_release_encap_match() to
avoid the need for a forward declaration.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a hashtable to detect duplicate and conflicting matches. If match
is not a duplicate, call MAE functions to add/remove it from OR table.
Calling code not added yet, so mark the new functions as unused.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
An encap match corresponds to an entry in the exact-match Outer Rule
table; the lookup response includes the encap type (protocol) allowing
the hardware to continue parsing into the inner headers.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Translate the fields from flow dissector into struct efx_tc_match.
In efx_tc_flower_replace(), reject filters that match on them, because
only 'foreign' filters (i.e. those for which the ingress dev is not
the sfc netdev or any of its representors, e.g. a tunnel netdev) can
use them.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend the MAE caps check to validate that the hardware supports these
outer-header matches where used by the driver.
Extend efx_mae_populate_match_criteria() to fill in the outer rule ID
and VNI match fields.
Nothing yet populates these match fields, nor creates outer rules.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Includes an explanation of the lifetime of the 'cursor' action-set `act`.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Herbert Xu says:
====================
macvlan: Allow some packets to bypass broadcast queue
This patch series allows some packets to bypass the broadcast
queue on receive. Currently all multicast packets are queued
on receive and then processed in a work queue. This is to avoid
an unbounded amount of work occurring in the receive path, as
one broadcast packet could easily translate into 4,000 packets.
However, for multicast packets with just one receiver (possible
for IPv6 ND), this introduces unnecessary latency as the packet
will go to exactly one device.
This series allows such multicast packets to be processed inline.
It also adds a toggle which lets the admin control what threshold
to set between queueing and not queueing. A follow-up patch for
iproute will be posted.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make the broadcast cutoff configurable through netlink. Note
that macvlan is weird because there is no central device for
us to configure (the lowerdev could be anything). So all the
options are duplicated over what could be thousands of child
devices.
IFLA_MACVLAN_BC_QUEUE_LEN took the approach of taking the maximum
of all child device settings. This is unnecessary as we could
simply store the option in the port device and take the last
child device that gets updated as the value to use.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As it stands all broadcast and multicast packets are queued and
processed in a work queue. This is so that we don't overwhelm
the receive softirq path by generating thousands of packets or
more (see commit 412ca1550cbe "macvlan: Move broadcasts into a
work queue").
As such all multicast packets will be delayed, even if they will
be received by a single macvlan device. As using a workqueue
is not free in terms of latency, we should avoid this where possible.
This patch adds a new filter to determine which addresses should
be delayed and which ones won't. This is done using a crude
counter of how many times an address has been added to the macvlan
port (ha->synced). For now if an address has been added more than
once, then it will be considered to be broadcast. This could be
tuned further by making this threshold configurable.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Matthieu Baerts says:
====================
mptcp: a couple of cleanups and improvements
Patch 1 removes an unneeded address copy in subflow_syn_recv_sock().
Patch 2 simplifies subflow_syn_recv_sock() to postpone some actions and
to avoid a bunch of conditionals.
Patch 3 stops reporting limits that are not taken into account when the
userspace PM is used.
Patch 4 adds a new test to validate that the 'subflows' field reported
by the kernel is correct. Such info can be retrieved via Netlink (e.g.
with ss) or getsockopt(SOL_MPTCP, MPTCP_INFO).
---
Changes in v2:
- Patch 3/4's commit message has been updated to use the correct SHA
- Rebased on latest net-next
- Link to v1: https://lore.kernel.org/r/20230324-upstream-net-next-20230324-misc-features-v1-0-5a29154592bd@tessares.net
====================
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the mptcp_info fields tests in endpoint_tests(). Add a
new function chk_mptcp_info() to check the given number of the given
mptcp_info field.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/330
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Only the in-kernel PM uses the number of address and subflow limits
allowed per connection.
It then makes more sense not to display such info when other PMs are
used not to confuse the userspace by showing limits not being used.
While at it, we can get rid of the "val" variable and add indentations
instead.
It would have been good to have done this modification directly in
commit 4d25247d3ae4 ("mptcp: bypass in-kernel PM restrictions for non-kernel PMs")
but as we change a bit the behaviour, it is fine not to backport it to
stable.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Postpone the msk cloning to the child process creation
so that we can avoid a bunch of conditionals.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/61
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the syn_recv fallback path, the msk is unused. We can skip
setting the socket address.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
