| Age | Commit message (Collapse) | Author |
|---|
|
IO can be started before add_disk() returns, such as reading parititon table,
then the monitor work should work for making forward progress.
So mark device as LIVE before adding disk, meantime change to
DEAD if add_disk() fails.
Fixed: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver")
Reviewed-by: Ziyang Zhang <ZiyangZhang@linux.alibaba.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230318141231.55562-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
RAC flush causes kernel panics on BCM6358 with EHCI/OHCI when booting from TP1:
[ 3.881739] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 3.895011] Reserved instruction in kernel code[#1]:
[ 3.900113] CPU: 0 PID: 1 Comm: init Not tainted 5.10.16 #0
[ 3.905829] $ 0 : 00000000 10008700 00000000 77d94060
[ 3.911238] $ 4 : 7fd1f088 00000000 81431cac 81431ca0
[ 3.916641] $ 8 : 00000000 ffffefff 8075cd34 00000000
[ 3.922043] $12 : 806f8d40 f3e812b7 00000000 000d9aaa
[ 3.927446] $16 : 7fd1f068 7fd1f080 7ff559b8 81428470
[ 3.932848] $20 : 00000000 00000000 55590000 77d70000
[ 3.938251] $24 : 00000018 00000010
[ 3.943655] $28 : 81430000 81431e60 81431f28 800157fc
[ 3.949058] Hi : 00000000
[ 3.952013] Lo : 00000000
[ 3.955019] epc : 80015808 setup_sigcontext+0x54/0x24c
[ 3.960464] ra : 800157fc setup_sigcontext+0x48/0x24c
[ 3.965913] Status: 10008703 KERNEL EXL IE
[ 3.970216] Cause : 00800028 (ExcCode 0a)
[ 3.974340] PrId : 0002a010 (Broadcom BMIPS4350)
[ 3.979170] Modules linked in: ohci_platform ohci_hcd fsl_mph_dr_of ehci_platform ehci_fsl ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
[ 3.992907] Process init (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=77e22ec8)
[ 4.000776] Stack : 81431ef4 7fd1f080 81431f28 81428470 7fd1f068 81431edc 7ff559b8 81428470
[ 4.009467] 81431f28 7fd1f080 55590000 77d70000 77d5498c 80015c70 806f0000 8063ae74
[ 4.018149] 08100002 81431f28 0000000a 08100002 81431f28 0000000a 77d6b418 00000003
[ 4.026831] ffffffff 80016414 80080734 81431ecc 81431ecc 00000001 00000000 04000000
[ 4.035512] 77d54874 00000000 00000000 00000000 00000000 00000012 00000002 00000000
[ 4.044196] ...
[ 4.046706] Call Trace:
[ 4.049238] [<80015808>] setup_sigcontext+0x54/0x24c
[ 4.054356] [<80015c70>] setup_frame+0xdc/0x124
[ 4.059015] [<80016414>] do_notify_resume+0x1dc/0x288
[ 4.064207] [<80011b50>] work_notifysig+0x10/0x18
[ 4.069036]
[ 4.070538] Code: 8fc300b4 00001025 26240008 <ac820000> ac830004 3c048063 0c0228aa 24846a00 26240010
[ 4.080686]
[ 4.082517] ---[ end trace 22a8edb41f5f983b ]---
[ 4.087374] Kernel panic - not syncing: Fatal exception
[ 4.092753] Rebooting in 1 seconds..
Because the bootloader (CFE) is not initializing the Read-ahead cache properly
on the second thread (TP1). Since the RAC was not initialized properly, we
should avoid flushing it at the risk of corrupting the instruction stream as
seen in the trace above.
Fixes: d59098a0e9cb ("MIPS: bmips: use generic dma noncoherent ops")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Signal 16 and higher represent the device's Index lines. The
priv->preset_enable array holds the device configuration for these Index
lines. The preset_enable configuration is active low on the device, so
invert the conditional check in quad8_action_read() to properly handle
the logical state of preset_enable.
Fixes: f1d8a071d45b ("counter: 104-quad-8: Add Generic Counter interface support")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230316203426.224745-1-william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
|
|
The Counter (CNTR) register is 24 bits wide, but we can have an
effective 25-bit count value by setting bit 24 to the XOR of the Borrow
flag and Carry flag. The flags can be read from the FLAG register, but a
race condition exists: the Borrow flag and Carry flag are instantaneous
and could change by the time the count value is read from the CNTR
register.
Since the race condition could result in an incorrect 25-bit count
value, remove support for 25-bit count values from this driver;
hard-coded maximum count values are replaced by a LS7267_CNTR_MAX define
for consistency and clarity.
Fixes: 28e5d3bb0325 ("iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8")
Cc: <stable@vger.kernel.org> # 6.1.x
Cc: <stable@vger.kernel.org> # 6.2.x
Link: https://lore.kernel.org/r/20230312231554.134858-1-william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
|
|
Eric Dumazet says:
====================
net: better const qualifier awareness
This is a follow-up of d27d367d3b78 ("inet: better const qualifier awareness")
Adopting container_of_const() to perform (struct sock *)->(protocol sock *)
operation is allowing us to propagate const qualifier and thus detect
misuses at compile time.
Most conversions are trivial, because most protocols did not adopt yet
const sk pointers where it could make sense.
Only mptcp and tcp patches (end of this series) are requiring small
adjustments.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can change tcp_sk() to propagate its argument const qualifier,
thanks to container_of_const().
We have two places where a const sock pointer has to be upgraded
to a write one. We have been using const qualifier for lockless
listeners to clearly identify points where writes could happen.
Add tcp_sk_rw() helper to better document these.
tcp_inbound_md5_hash(), __tcp_grow_window(), tcp_reset_check()
and tcp_rack_reo_wnd() get an additional const qualififer
for their @tp local variables.
smc_check_reset_syn_req() also needs a similar change.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can change mptcp_sk() to propagate its argument const qualifier,
thanks to container_of_const().
We need to change few things to avoid build errors:
mptcp_set_datafin_timeout() and mptcp_rtx_head() have to accept
non-const sk pointers.
@msk local variable in mptcp_pending_tail() must be const.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can change [a]x25_sk() to propagate their argument const qualifier,
thanks to container_of_const().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can change smc_sk() to propagate its argument const qualifier,
thanks to container_of_const().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Karsten Graul <kgraul@linux.ibm.com>
Cc: Wenjia Zhang <wenjia@linux.ibm.com>
Cc: Jan Karcher <jaka@linux.ibm.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can change unix_sk() to propagate its argument const qualifier,
thanks to container_of_const().
We need to change dump_common_audit_data() 'struct unix_sock *u'
local var to get a const attribute.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can change dccp_sk() to propagate its argument const qualifier,
thanks to container_of_const().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can change raw6_sk() to propagate its argument const qualifier,
thanks to container_of_const().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can change raw_sk() to propagate const qualifier of its argument,
thanks to container_of_const()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can change pkt_sk() to propagate const qualifier of its argument,
thanks to container_of_const()
This should avoid some potential errors caused by accidental
(const -> not_const) promotion.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can change udp_sk() to propagate const qualifier of its argument,
thanks to container_of_const()
This should avoid some potential errors caused by accidental
(const -> not_const) promotion.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Another Lenovo convertable which reports a landscape resolution of
1920x1200 with a pitch of (1920 * 4) bytes, while the actual framebuffer
has a resolution of 1200x1920 with a pitch of (1200 * 4) bytes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Commit 8633ef82f101 ("drivers/firmware: consolidate EFI framebuffer setup
for all arches") moved the sysfb_apply_efi_quirks() call in sysfb_init()
from before the [sysfb_]parse_mode() call to after it.
But sysfb_apply_efi_quirks() modifies the global screen_info struct which
[sysfb_]parse_mode() parses, so doing it later is too late.
This has broken all DMI based quirks for correcting wrong firmware efifb
settings when simpledrm is used.
To fix this move the sysfb_apply_efi_quirks() call back to its old place
and split the new setup of the efifb_fwnode (which requires
the platform_device) into its own function and call that at
the place of the moved sysfb_apply_efi_quirks(pd) calls.
Fixes: 8633ef82f101 ("drivers/firmware: consolidate EFI framebuffer setup for all arches")
Cc: stable@vger.kernel.org
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
We no longer use the recsize argument for locating the string table in
an SMBIOS record, so we can drop it from the internal API.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Instead of using the SMBIOS type 1 record 'family' field, which is often
modified by OEMs, use the type 4 'processor ID' and 'processor version'
fields, which are set to a small set of probe-able values on all known
Ampere EFI systems in the field.
Fixes: 550b33cfd4452968 ("arm64: efi: Force the use of ...")
Tested-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The type 1 SMBIOS record happens to always be the same size, but there
are other record types which have been augmented over time, and so we
should really use the length field in the header to decide where the
string table starts.
Fixes: 550b33cfd4452968 ("arm64: efi: Force the use of ...")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Gavin Li says:
====================
net/mlx5e: Add GBP VxLAN HW offload support
Patch-1: Remove unused argument from functions.
Patch-2: Expose helper function vxlan_build_gbp_hdr.
Patch-3: Add helper function for encap_info_equal for tunnels with options.
Patch-4: Preserving the const-ness of the pointer in ip_tunnel_info_opts.
Patch-5: Add HW offloading support for TC flows with VxLAN GBP encap/decap
in mlx ethernet driver.
====================
Link: https://lore.kernel.org/r/20230316070758.83512-1-gavinl@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add HW offloading support for TC flows with VxLAN GBP encap/decap.
Example of encap rule:
tc filter add dev eth0 protocol ip ingress flower \
action tunnel_key set id 42 vxlan_opts 512 \
action mirred egress redirect dev vxlan1
Example of decap rule:
tc filter add dev vxlan1 protocol ip ingress flower \
enc_key_id 42 enc_dst_port 4789 vxlan_opts 1024 \
action tunnel_key unset action mirred egress redirect dev eth0
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Gavi Teitz <gavi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Acked-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Change ip_tunnel_info_opts( ) from static function to macro to cast return
value and preserve the const-ness of the pointer.
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For tunnels with options, eg, geneve and vxlan with gbp, they share the
same way to compare the headers and options. Extract the code as a common
function for them.
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Gavi Teitz <gavi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Acked-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function vxlan_build_gbp_hdr will be used by other modules to build
gbp option in vxlan header according to gbp flags.
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Gavi Teitz <gavi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Acked-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
vxlan_build_gpe_hdr( )
Remove unused argument (i.e. u32 vxflags) in vxlan_build_gbp_hdr( ) and
vxlan_build_gpe_hdr( ) function arguments.
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-03-16 (iavf)
This series contains updates to iavf driver only.
Alex fixes incorrect check against Rx hash feature and corrects payload
value for IPv6 UDP packet.
Ahmed removes bookkeeping of VLAN 0 filter as it always exists and can
cause a false max filter error message.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: do not track VLAN 0 filters
iavf: fix non-tunneled IPv6 UDP packet type and hashing
iavf: fix inverted Rx hash condition leading to disabled hash
====================
Link: https://lore.kernel.org/r/20230316155316.1554931-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
wwan_port_fops_write inputs the SKB parameter to the TX callback of
the WWAN device driver. However, the WWAN device (e.g., t7xx) may
have an MTU less than the size of SKB, causing the TX buffer to be
sliced and copied once more in the WWAN device driver.
This patch implements the slicing in the WWAN subsystem and gives
the WWAN devices driver the option to slice(by frag_len) or not. By
doing so, the additional memory copy is reduced.
Meanwhile, this patch gives WWAN devices driver the option to reserve
headroom in fragments for the device-specific metadata.
Signed-off-by: haozhe chang <haozhe.chang@mediatek.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/20230316095826.181904-1-haozhe.chang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The CPTS PPS GENf adjustment settings are invalid after it has been
disabled for a while, so reset them.
Fixes: eb9233ce6751 ("net: ethernet: ti: am65-cpts: adjust pps following ptp changes")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://lore.kernel.org/r/20230316095232.2002680-1-s-vadapalli@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Increase halt timeout to accommodate for 16K SRAM at 10Mbps rounded.
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230316083050.2108-1-harini.katakam@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for SDX65, which uses IPA v5.0.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20230315194305.1647311-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Klaus Kudielka says:
====================
net: dsa: mv88e6xxx: accelerate C45 scan
Starting with commit 1a136ca2e089 ("net: mdio: scan bus based on bus
capabilities for C22 and C45"), mdiobus_scan_bus_c45() is being called on
buses with MDIOBUS_NO_CAP. On a Turris Omnia (Armada 385, 88E6176 switch),
this causes a significant increase of boot time, from 1.6 seconds, to 6.3
seconds. The boot time stated here is until start of /init.
Further testing revealed that the C45 scan is indeed expensive (around
2.7 seconds, due to a huge number of bus transactions), and called twice.
Two things were suggested:
(1) to move the expensive call of mv88e6xxx_mdios_register() from
mv88e6xxx_probe() to mv88e6xxx_setup().
(2) to mask apparently non-existing phys during probing.
Before that:
Patch #1 prepares the driver to handle the movement of
mv88e6xxx_mdios_register() to mv88e6xxx_setup() for cross-chip DSA trees.
Patch #2 is preparatory code movement, without functional change.
With those changes, boot time on the Turris Omnia is back to normal.
Link: https://lore.kernel.org/lkml/449bde236c08d5ab5e54abd73b645d8b29955894.camel@gmail.com/
====================
Link: https://lore.kernel.org/r/20230315163846.3114-1-klaus.kudielka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To avoid excessive mdio bus transactions during probing, mask all phy
addresses that do not exist (there is a 1:1 mapping between switch port
number and phy address).
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Call the rather expensive mv88e6xxx_mdios_register() at the beginning of
mv88e6xxx_setup(). This avoids the double call via mv88e6xxx_probe()
during boot.
For symmetry, call mv88e6xxx_mdios_unregister() at the end of
mv88e6xxx_teardown().
Link: https://lore.kernel.org/lkml/449bde236c08d5ab5e54abd73b645d8b29955894.camel@gmail.com/
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move mv88e6xxx_setup() below mv88e6xxx_mdios_register(), so that we are
able to call the latter one from here. Do the same thing for the
inverse functions.
Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
irq_find_mapping() does not need irq_dispose_mapping(), only
irq_create_mapping() does.
Calling irq_dispose_mapping() from mv88e6xxx_g2_irq_mdio_free() and from
the error path of mv88e6xxx_g2_irq_mdio_setup() effectively means that
the mdiobus logic (for internal PHY interrupts) is disposing of a
hwirq->virq mapping which it is not responsible of (but instead, the
function pair mv88e6xxx_g2_irq_setup() + mv88e6xxx_g2_irq_free() is).
With the current code structure, this isn't such a huge problem, because
mv88e6xxx_g2_irq_mdio_free() is called relatively close to the real
owner of the IRQ mappings:
mv88e6xxx_remove()
-> mv88e6xxx_unregister_switch()
-> mv88e6xxx_mdios_unregister()
-> mv88e6xxx_g2_irq_mdio_free()
-> mv88e6xxx_g2_irq_free()
and the switch isn't 'live' in any way such that it would be able of
generating interrupts at this point (mv88e6xxx_unregister_switch() has
been called).
However, there is a desire to split mv88e6xxx_mdios_unregister() and
mv88e6xxx_g2_irq_free() such that mv88e6xxx_mdios_unregister() only gets
called from mv88e6xxx_teardown(). This is much more problematic, as can
be seen below.
In a cross-chip scenario (say 3 switches d0032004.mdio-mii:10,
d0032004.mdio-mii:11 and d0032004.mdio-mii:12 which form a single DSA
tree), it is possible to unbind the device driver from a single switch
(say d0032004.mdio-mii:10).
When that happens, mv88e6xxx_remove() will be called for just that one
switch, and this will call mv88e6xxx_unregister_switch() which will tear
down the entire tree (calling mv88e6xxx_teardown() for all 3 switches).
Assuming mv88e6xxx_mdios_unregister() was moved to mv88e6xxx_teardown(),
at this stage, all 3 switches will have called irq_dispose_mapping() on
their mdiobus virqs.
When we bind again the device driver to d0032004.mdio-mii:10,
mv88e6xxx_probe() is called for it, which calls dsa_register_switch().
The DSA tree is now complete again, and mv88e6xxx_setup() is called for
all 3 switches.
Also assuming that mv88e6xxx_mdios_register() is moved to
mv88e6xxx_setup() (the 2 assumptions go together), at this point,
d0032004.mdio-mii:11 and d0032004.mdio-mii:12 don't have an IRQ mapping
for the internal PHYs anymore, as they've disposed of it in
mv88e6xxx_teardown(). Whereas switch d0032004.mdio-mii:10 has re-created
it, because its code path comes from mv88e6xxx_probe().
Simply put, this change prepares the driver to handle the movement of
mv88e6xxx_mdios_register() to mv88e6xxx_setup() for cross-chip DSA trees.
Also, the code being deleted was partially wrong anyway (in a way which
may have hidden this other issue). mv88e6xxx_g2_irq_mdio_setup()
populates bus->irq[] starting with offset chip->info->phy_base_addr, but
the teardown path doesn't apply that offset too. So it disposes of virq
0 for phy = [ 0, phy_base_addr ).
All switch families have phy_base_addr = 0, except for MV88E6141 and
MV88E6341 which have it as 0x10. I guess those families would have
happened to work by mistake in cross-chip scenarios too.
I'm deleting the body of mv88e6xxx_g2_irq_mdio_free() but leaving its
call sites and prototype in place. This is because, if we ever need to
add back some teardown procedure in the future, it will be perhaps
error-prone to deduce the proper call sites again. Whereas like this,
no extra code should get generated, it shouldn't bother anybody.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove PCI_VENDOR_ID_WANGXUN which is redefined in
drivers/pci/quirks.
Signed-off-by: mengyuanlou <mengyuanlou@net-swift.com>
Link: https://lore.kernel.org/r/20230315091846.17314-1-mengyuanlou@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Packet length retrieved from descriptor may be larger than
the actual socket buffer length. In such case the cloned
skb passed up the network stack will leak kernel memory contents.
Fixes: 2f7ca802bdae ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver")
Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230316101954.75836-1-szymon.heidrich@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KVM_HC_CLOCK_PAIRING currently fails inside SEV-SNP guests because the
guest passes an address to static data to the host. In confidential
computing the host can't access arbitrary guest memory so handling the
hypercall runs into an "rmpfault". To make the hypercall work, the guest
needs to explicitly mark the memory as decrypted. Do that in
kvm_arch_ptp_init(), but retain the previous behavior for
non-confidential guests to save us from having to allocate memory.
Add a new arch-specific function (kvm_arch_ptp_exit()) to free the
allocation and mark the memory as encrypted again.
Signed-off-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Link: https://lore.kernel.org/r/20230308150531.477741-1-jpiotrowski@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
CPU port should also be enabled in order to get a working switch.
Fixes: a5538a777b73 ("net: dsa: b53: mmap: Add device tree support")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230316172807.460146-1-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fixes: 0813299c586b ("ext4: Fix possible corruption when moving a directory")
Link: https://lore.kernel.org/r/5efbe1b9-ad8b-4a4f-b422-24824d2b775c@kili.mountain
Reported-by: Dan Carpenter <error27@gmail.com>
Reported-by: syzbot+0c73d1d8b952c5f3d714@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
show_stack dumps raw stack contents which may trigger an unnecessary
KASAN report. Fix it by copying stack contents to a temporary buffer
with __memcpy and then printing that buffer instead of passing stack
pointer directly to the print_hex_dump.
Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
net/wireless/nl80211.c
b27f07c50a73 ("wifi: nl80211: fix puncturing bitmap policy")
cbbaf2bb829b ("wifi: nl80211: add a command to enable/disable HW timestamping")
https://lore.kernel.org/all/20230314105421.3608efae@canb.auug.org.au
tools/testing/selftests/net/Makefile
62199e3f1658 ("selftests: net: Add VXLAN MDB test")
13715acf8ab5 ("selftest: Add test for bind() conflicts.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, test_progs outputs all stdout/stderr as it runs, and when it
is done, prints a summary.
It is non-trivial for tooling to parse that output and extract meaningful
information from it.
This change adds a new option, `--json-summary`/`-J` that let the caller
specify a file where `test_progs{,-no_alu32}` can write a summary of the
run in a json format that can later be parsed by tooling.
Currently, it creates a summary section with successes/skipped/failures
followed by a list of failed tests and subtests.
A test contains the following fields:
- name: the name of the test
- number: the number of the test
- message: the log message that was printed by the test.
- failed: A boolean indicating whether the test failed or not. Currently
we only output failed tests, but in the future, successful tests could
be added.
- subtests: A list of subtests associated with this test.
A subtest contains the following fields:
- name: same as above
- number: sanme as above
- message: the log message that was printed by the subtest.
- failed: same as above but for the subtest
An example run and json content below:
```
$ sudo ./test_progs -a $(grep -v '^#' ./DENYLIST.aarch64 | awk '{print
$1","}' | tr -d '\n') -j -J /tmp/test_progs.json
$ jq < /tmp/test_progs.json | head -n 30
{
"success": 29,
"success_subtest": 23,
"skipped": 3,
"failed": 28,
"results": [
{
"name": "bpf_cookie",
"number": 10,
"message": "test_bpf_cookie:PASS:skel_open 0 nsec\n",
"failed": true,
"subtests": [
{
"name": "multi_kprobe_link_api",
"number": 2,
"message": "kprobe_multi_link_api_subtest:PASS:load_kallsyms 0 nsec\nlibbpf: extern 'bpf_testmod_fentry_test1' (strong): not resolved\nlibbpf: failed to load object 'kprobe_multi'\nlibbpf: failed to load BPF skeleton 'kprobe_multi': -3\nkprobe_multi_link_api_subtest:FAIL:fentry_raw_skel_load unexpected error: -3\n",
"failed": true
},
{
"name": "multi_kprobe_attach_api",
"number": 3,
"message": "libbpf: extern 'bpf_testmod_fentry_test1' (strong): not resolved\nlibbpf: failed to load object 'kprobe_multi'\nlibbpf: failed to load BPF skeleton 'kprobe_multi': -3\nkprobe_multi_attach_api_subtest:FAIL:fentry_raw_skel_load unexpected error: -3\n",
"failed": true
},
{
"name": "lsm",
"number": 8,
"message": "lsm_subtest:PASS:lsm.link_create 0 nsec\nlsm_subtest:FAIL:stack_mprotect unexpected stack_mprotect: actual 0 != expected -1\n",
"failed": true
}
```
The file can then be used to print a summary of the test run and list of
failing tests/subtests:
```
$ jq -r < /tmp/test_progs.json '"Success: \(.success)/\(.success_subtest), Skipped: \(.skipped), Failed: \(.failed)"'
Success: 29/23, Skipped: 3, Failed: 28
$ jq -r < /tmp/test_progs.json '.results | map([
if .failed then "#\(.number) \(.name)" else empty end,
(
. as {name: $tname, number: $tnum} | .subtests | map(
if .failed then "#\($tnum)/\(.number) \($tname)/\(.name)" else empty end
)
)
]) | flatten | .[]' | head -n 20
#10 bpf_cookie
#10/2 bpf_cookie/multi_kprobe_link_api
#10/3 bpf_cookie/multi_kprobe_attach_api
#10/8 bpf_cookie/lsm
#15 bpf_mod_race
#15/1 bpf_mod_race/ksym (used_btfs UAF)
#15/2 bpf_mod_race/kfunc (kfunc_btf_tab UAF)
#36 cgroup_hierarchical_stats
#61 deny_namespace
#61/1 deny_namespace/unpriv_userns_create_no_bpf
#73 fexit_stress
#83 get_func_ip_test
#99 kfunc_dynptr_param
#99/1 kfunc_dynptr_param/dynptr_data_null
#99/4 kfunc_dynptr_param/dynptr_data_null
#100 kprobe_multi_bench_attach
#100/1 kprobe_multi_bench_attach/kernel
#100/2 kprobe_multi_bench_attach/modules
#101 kprobe_multi_test
#101/1 kprobe_multi_test/skel_api
```
Signed-off-by: Manu Bretelle <chantr4@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230317163256.3809328-1-chantr4@gmail.com
|
|
Alexei Starovoitov says:
====================
From: Alexei Starovoitov <ast@kernel.org>
Allow BPF programs detect at load time whether particular kfunc exists.
Patch 1: Allow ld_imm64 to point to kfunc in the kernel.
Patch 2: Fix relocation of kfunc in ld_imm64 insn when kfunc is in kernel module.
Patch 3: Introduce bpf_ksym_exists() macro.
Patch 4: selftest.
NOTE: detection of kfuncs from light skeleton is not supported yet.
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
Add load and run time test for bpf_ksym_exists() and check that the verifier
performs dead code elimination for non-existing kfunc.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20230317201920.62030-5-alexei.starovoitov@gmail.com
|
|
Introduce bpf_ksym_exists() macro that can be used by BPF programs
to detect at load time whether particular ksym (either variable or kfunc)
is present in the kernel.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230317201920.62030-4-alexei.starovoitov@gmail.com
|
|
void *p = kfunc; -> generates ld_imm64 insn.
kfunc() -> generates bpf_call insn.
libbpf patches bpf_call insn correctly while only btf_id part of ld_imm64 is
set in the former case. Which means that pointers to kfuncs in modules are not
patched correctly and the verifier rejects load of such programs due to btf_id
being out of range. Fix libbpf to patch ld_imm64 for kfunc.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230317201920.62030-3-alexei.starovoitov@gmail.com
|
|
Allow ld_imm64 insn with BPF_PSEUDO_BTF_ID to hold the address of kfunc. The
ld_imm64 pointing to a valid kfunc will be seen as non-null PTR_TO_MEM by
is_branch_taken() logic of the verifier, while libbpf will resolve address to
unknown kfunc as ld_imm64 reg, 0 which will also be recognized by
is_branch_taken() and the verifier will proceed dead code elimination. BPF
programs can use this logic to detect at load time whether kfunc is present in
the kernel with bpf_ksym_exists() macro that is introduced in the next patches.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20230317201920.62030-2-alexei.starovoitov@gmail.com
|
|
We need to reset forceidle_sum to 0 when reading from root, since the
bstat we accumulate into is stack allocated.
To make this more robust, just replace the existing cputime reset with a
memset of the overall bstat.
Signed-off-by: Josh Don <joshdon@google.com>
Fixes: 1fcf54deb767 ("sched/core: add forced idle accounting for cgroups")
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Tejun Heo <tj@kernel.org>
|
