summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-04-03net/mlx5e: Add SW implementation to support IPsec 64 bit soft and hard limitsLeon Romanovsky
The CX7 cards which support IPsec packet offload use 32 bits to configure soft and hard packet limits. This is not enough as the software part using 64 bits. The needed functionality of supporting 64 bits is implemented through mlx5 abstraction layer, which will ensure that HW is reconfigured on-demand every 2^31 packets. To simulate the 64 bit IPsec soft/hard limits, we divide the soft/hard limits to multiple interrupts (rounds). Each round counts 2^31 packets. Once the counter is less than or equal to 2^31, the soft event is raised and software sets the bit 31 of the counter and decrement the round counter. Link: https://lore.kernel.org/r/5a86c890b6dccb6865acf9042a8b03f899d1f3f9.1680162300.git.leonro@nvidia.com Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2023-04-03net/mlx5e: Prevent zero IPsec soft/hard limitsLeon Romanovsky
Hardware triggers limit events when the packets arrive and are processed through the device. In case zero was configured as a limit, the HW won't be able to arm event as it happens at the end of execution pipeline. Let's prevent such configuration. Link: https://lore.kernel.org/r/80d0ba33e21fb28b1b91d306d1da39df3d990b68.1680162300.git.leonro@nvidia.com Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2023-04-03net/mlx5e: Factor out IPsec ASO update functionLeon Romanovsky
The ASO update is common operation which is going to be used in next patch, so as a preparation, let's refactor the code for future reuse. As part of this refactoring, not used function argument was removed too. Link: https://lore.kernel.org/r/d04770b959822fed51c22c13e798f04d760a682e.1680162300.git.leonro@nvidia.com Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2023-04-03drm/panfrost: Fix the panfrost_mmu_map_fault_addr() error pathBoris Brezillon
Make sure all bo->base.pages entries are either NULL or pointing to a valid page before calling drm_gem_shmem_put_pages(). Reported-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: <stable@vger.kernel.org> Fixes: 187d2929206e ("drm/panfrost: Add support for GPU heap allocations") Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210521093811.1018992-1-boris.brezillon@collabora.com
2023-04-02ksmbd: fix slab-out-of-bounds in init_smb2_rsp_hdrNamjae Jeon
When smb1 mount fails, KASAN detect slab-out-of-bounds in init_smb2_rsp_hdr like the following one. For smb1 negotiate(56bytes) , init_smb2_rsp_hdr() for smb2 is called. The issue occurs while handling smb1 negotiate as smb2 server operations. Add smb server operations for smb1 (get_cmd_val, init_rsp_hdr, allocate_rsp_buf, check_user_session) to handle smb1 negotiate so that smb2 server operation does not handle it. [ 411.400423] CIFS: VFS: Use of the less secure dialect vers=1.0 is not recommended unless required for access to very old servers [ 411.400452] CIFS: Attempting to mount \\192.168.45.139\homes [ 411.479312] ksmbd: init_smb2_rsp_hdr : 492 [ 411.479323] ================================================================== [ 411.479327] BUG: KASAN: slab-out-of-bounds in init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd] [ 411.479369] Read of size 16 at addr ffff888488ed0734 by task kworker/14:1/199 [ 411.479379] CPU: 14 PID: 199 Comm: kworker/14:1 Tainted: G OE 6.1.21 #3 [ 411.479386] Hardware name: ASUSTeK COMPUTER INC. Z10PA-D8 Series/Z10PA-D8 Series, BIOS 3801 08/23/2019 [ 411.479390] Workqueue: ksmbd-io handle_ksmbd_work [ksmbd] [ 411.479425] Call Trace: [ 411.479428] <TASK> [ 411.479432] dump_stack_lvl+0x49/0x63 [ 411.479444] print_report+0x171/0x4a8 [ 411.479452] ? kasan_complete_mode_report_info+0x3c/0x200 [ 411.479463] ? init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd] [ 411.479497] kasan_report+0xb4/0x130 [ 411.479503] ? init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd] [ 411.479537] kasan_check_range+0x149/0x1e0 [ 411.479543] memcpy+0x24/0x70 [ 411.479550] init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd] [ 411.479585] handle_ksmbd_work+0x109/0x760 [ksmbd] [ 411.479616] ? _raw_spin_unlock_irqrestore+0x50/0x50 [ 411.479624] ? smb3_encrypt_resp+0x340/0x340 [ksmbd] [ 411.479656] process_one_work+0x49c/0x790 [ 411.479667] worker_thread+0x2b1/0x6e0 [ 411.479674] ? process_one_work+0x790/0x790 [ 411.479680] kthread+0x177/0x1b0 [ 411.479686] ? kthread_complete_and_exit+0x30/0x30 [ 411.479692] ret_from_fork+0x22/0x30 [ 411.479702] </TASK> Fixes: 39b291b86b59 ("ksmbd: return unsupported error on smb1 mount") Cc: stable@vger.kernel.org Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-04-02ksmbd: delete asynchronous work from listNamjae Jeon
When smb2_lock request is canceled by smb2_cancel or smb2_close(), ksmbd is missing deleting async_request_entry async_requests list. Because calling init_smb2_rsp_hdr() in smb2_lock() mark ->synchronous as true and then it will not be deleted in ksmbd_conn_try_dequeue_request(). This patch add release_async_work() to release the ones allocated for async work. Cc: stable@vger.kernel.org Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-04-02scsi: iscsi_tcp: Check that sock is valid before iscsi_set_param()Zhong Jinghua
The validity of sock should be checked before assignment to avoid incorrect values. Commit 57569c37f0ad ("scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()") introduced this change which may lead to inconsistent values of tcp_sw_conn->sendpage and conn->datadgst_en. Fix the issue by moving the position of the assignment. Fixes: 57569c37f0ad ("scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()") Signed-off-by: Zhong Jinghua <zhongjinghua@huawei.com> Link: https://lore.kernel.org/r/20230329071739.2175268-1-zhongjinghua@huaweicloud.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-04-02scsi: qla2xxx: Fix memory leak in qla2x00_probe_one()Li Zetao
There is a memory leak reported by kmemleak: unreferenced object 0xffffc900003f0000 (size 12288): comm "modprobe", pid 19117, jiffies 4299751452 (age 42490.264s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000629261a8>] __vmalloc_node_range+0xe56/0x1110 [<0000000001906886>] __vmalloc_node+0xbd/0x150 [<000000005bb4dc34>] vmalloc+0x25/0x30 [<00000000a2dc1194>] qla2x00_create_host+0x7a0/0xe30 [qla2xxx] [<0000000062b14b47>] qla2x00_probe_one+0x2eb8/0xd160 [qla2xxx] [<00000000641ccc04>] local_pci_probe+0xeb/0x1a0 The root cause is traced to an error-handling path in qla2x00_probe_one() when the adapter "base_vha" initialize failed. The fab_scan_rp "scan.l" is used to record the port information and it is allocated in qla2x00_create_host(). However, it is not released in the error handling path "probe_failed". Fix this by freeing the memory of "scan.l" when an error occurs in the adapter initialization process. Fixes: a4239945b8ad ("scsi: qla2xxx: Add switch command to simplify fabric discovery") Signed-off-by: Li Zetao <lizetao1@huawei.com> Link: https://lore.kernel.org/r/20230325110004.363898-1-lizetao1@huawei.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-04-02scsi: mpi3mr: Handle soft reset in progress fault code (0xF002)Ranjan Kumar
The driver is exiting from the fault watchdog thread if it sees the 0xF002 (Soft reset in progress) fault code. If the driver initiates the soft reset, then the driver restarts the watchdog at the end of the soft reset completion. However, if the soft reset is initiated by the firmware asynchronously, then the driver will never restart the watchdog and never re-initialize the controller after the asynchronous soft reset completion. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20230331122317.11391-1-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-04-02scsi: Revert "scsi: ufs: core: Initialize devfreq synchronously"Adrien Thierry
This reverts commit 7dafc3e007918384c8693ff8d70381b5c1e9c247. This patch introduced a regression [1] where hba->pwr_info is used before being initialized, which could create issues in ufshcd_scale_gear(). Revert it until a better solution is found. [1] https://lore.kernel.org/all/CAGaU9a_PMZhqv+YJ0r3w-hJMsR922oxW6Kg59vw+oen-NZ6Otw@mail.gmail.com Signed-off-by: Adrien Thierry <athierry@redhat.com> Link: https://lore.kernel.org/r/20230329205426.46393-1-athierry@redhat.com Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-04-02bpf, docs: Add docs on extended 64-bit immediate instructionsDave Thaler
Add docs on extended 64-bit immediate instructions, including six instructions previously undocumented. Include a brief description of maps and variables, as used by those instructions. V1 -> V2: rebased on top of latest master V2 -> V3: addressed comments from Alexei V3 -> V4: addressed comments from David Vernet Signed-off-by: Dave Thaler <dthaler@microsoft.com> Link: https://lore.kernel.org/r/20230326054946.2331-1-dthaler1968@googlemail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-04-02Update email address and mailing list for v9fsEric Van Hensbergen
We've recently moved the mailing list to lists.linux.dev to move away from the sourceforge infrastructure. This also updates the website from the (no longer v9fs relevant?) swik.net address to the github group which contains pointers to test cases, the protocol, servers, etc. This also changes my email from my gmail to my kernel.org address. Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org> Acked-by: Dominique Martinet <asmadeus@codewreck.org> Acked-by: Christian Schoenebeck <linux_oss@crudebyte.com>
2023-04-02Linux 6.3-rc5v6.3-rc5Linus Torvalds
2023-04-02Merge tag 'for-6.3-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - scan block devices in non-exclusive mode to avoid temporary mkfs failures - fix race between quota disable and quota assign ioctls - fix deadlock when aborting transaction during relocation with scrub - ignore fiemap path cache when there are multiple paths for a node * tag 'for-6.3-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: ignore fiemap path cache when there are multiple paths for a node btrfs: fix deadlock when aborting transaction during relocation with scrub btrfs: scan device in non-exclusive mode btrfs: fix race between quota disable and quota assign ioctls
2023-04-02Revert "venus: firmware: Correct non-pix start and end addresses"Javier Martinez Canillas
This reverts commit a837e5161cff, which broke probing of the venus driver, at least on the SC7180 SoC HP X2 Chromebook: qcom-venus aa00000.video-codec: Adding to iommu group 11 qcom-venus aa00000.video-codec: non legacy binding qcom-venus aa00000.video-codec: failed to reset venus core qcom-venus: probe of aa00000.video-codec failed with error -110 Matthias Kaehlcke also reported that the same change caused a regression in SC7180 and sc7280, that prevents AOSS from entering sleep mode during system suspend. So let's revert this commit for now to fix both issues. Fixes: a837e5161cff ("venus: firmware: Correct non-pix start and end addresses") Reported-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-04-02Merge tag 'driver-core-6.3-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are three small changes for 6.3-rc5 semi-related to driver core stuff: - documentation update where we move the security_bugs file to a more relevant location. - mdt/spi-nor debugfs memory leak fix that's been floating around for a long time and acked by the maintainer - cacheinfo bugfix for a regression in 6.3-rc1 All have been in linux-next with no reported problems" * tag 'driver-core-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: cacheinfo: Fix LLC is not exported through sysfs Documentation/security-bugs: move from admin-guide/ to process/ mtd: spi-nor: fix memory leak when using debugfs_lookup()
2023-04-02Merge tag 'powerpc-6.3-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix a false positive warning in __pte_needs_flush() (with DEBUG_VM=y) - Fix oops when a PF_IO_WORKER thread tries to core dump - Don't try to reconfigure VAS when it's disabled Thanks to Benjamin Gray, Haren Myneni, Jens Axboe, Nathan Lynch, and Russell Currey. * tag 'powerpc-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries/vas: Ignore VAS update for DLPAR if copy/paste is not enabled powerpc: Don't try to copy PPR for task with NULL pt_regs powerpc/64s: Fix __pte_needs_flush() false positive warning
2023-04-02bpf: compute hashes in bloom filter similar to hashmapAnton Protopopov
If the value size in a bloom filter is a multiple of 4, then the jhash2() function is used to compute hashes. The length parameter of this function equals to the number of 32-bit words in input. Compute it in the hot path instead of pre-computing it, as this is translated to one extra shift to divide the length by four vs. one extra memory load of a pre-computed length. Signed-off-by: Anton Protopopov <aspsk@isovalent.com> Link: https://lore.kernel.org/r/20230402114340.3441-1-aspsk@isovalent.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-04-02sctp: check send stream number after wait_for_sndbufXin Long
This patch fixes a corner case where the asoc out stream count may change after wait_for_sndbuf. When the main thread in the client starts a connection, if its out stream count is set to N while the in stream count in the server is set to N - 2, another thread in the client keeps sending the msgs with stream number N - 1, and waits for sndbuf before processing INIT_ACK. However, after processing INIT_ACK, the out stream count in the client is shrunk to N - 2, the same to the in stream count in the server. The crash occurs when the thread waiting for sndbuf is awake and sends the msg in a non-existing stream(N - 1), the call trace is as below: KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f] Call Trace: <TASK> sctp_cmd_send_msg net/sctp/sm_sideeffect.c:1114 [inline] sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1777 [inline] sctp_side_effects net/sctp/sm_sideeffect.c:1199 [inline] sctp_do_sm+0x197d/0x5310 net/sctp/sm_sideeffect.c:1170 sctp_primitive_SEND+0x9f/0xc0 net/sctp/primitive.c:163 sctp_sendmsg_to_asoc+0x10eb/0x1a30 net/sctp/socket.c:1868 sctp_sendmsg+0x8d4/0x1d90 net/sctp/socket.c:2026 inet_sendmsg+0x9d/0xe0 net/ipv4/af_inet.c:825 sock_sendmsg_nosec net/socket.c:722 [inline] sock_sendmsg+0xde/0x190 net/socket.c:745 The fix is to add an unlikely check for the send stream number after the thread wakes up from the wait_for_sndbuf. Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations") Reported-by: syzbot+47c24ca20a2fa01f082e@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-02net: alteon: remove unused len variableTom Rix
clang with W=1 reports drivers/net/ethernet/alteon/acenic.c:2438:10: error: variable 'len' set but not used [-Werror,-Wunused-but-set-variable] int i, len = 0; ^ This variable is not used so remove it. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-02Merge branch 'mlxsw-transceiver-trip-points'David S. Miller
Petr Machata says: ==================== mlxsw: Use static trip points for transceiver modules Ido Schimmel writes: See patch #1 for motivation and implementation details. Patches #2-#3 are simple cleanups as a result of the changes in the first patch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-02mlxsw: core_thermal: Simplify transceiver module get_temp() callbackIdo Schimmel
The get_temp() callback of a thermal zone associated with a transceiver module no longer needs to read the temperature thresholds of the module. Therefore, simplify the callback by only reading the temperature. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-02mlxsw: core_thermal: Make mlxsw_thermal_module_init() voidIdo Schimmel
The function can no longer fail so make it void and remove the associated error path. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-02mlxsw: core_thermal: Use static trip points for transceiver modulesIdo Schimmel
The driver registers a thermal zone for each transceiver module and tries to set the trip point temperatures according to the thresholds read from the transceiver. If a threshold cannot be read or if a transceiver is unplugged, the trip point temperature is set to zero, which means that it is disabled as far as the thermal subsystem is concerned. A recent change in the thermal core made it so that such trip points are no longer marked as disabled, which lead the thermal subsystem to incorrectly set the associated cooling devices to the their maximum state [1]. A fix to restore this behavior was merged in commit f1b80a3878b2 ("thermal: core: Restore behavior regarding invalid trip points"). However, the thermal maintainer suggested to not rely on this behavior and instead always register a valid array of trip points [2]. Therefore, create a static array of trip points with sane defaults (suggested by Vadim) and register it with the thermal zone of each transceiver module. User space can choose to override these defaults using the thermal zone sysfs interface since these files are writeable. Before: $ cat /sys/class/thermal/thermal_zone11/type mlxsw-module11 $ cat /sys/class/thermal/thermal_zone11/trip_point_*_temp 65000 75000 80000 After: $ cat /sys/class/thermal/thermal_zone11/type mlxsw-module11 $ cat /sys/class/thermal/thermal_zone11/trip_point_*_temp 55000 65000 80000 Also tested by reverting commit f1b80a3878b2 ("thermal: core: Restore behavior regarding invalid trip points") and making sure that the associated cooling devices are not set to their maximum state. [1] https://lore.kernel.org/linux-pm/ZA3CFNhU4AbtsP4G@shredder/ [2] https://lore.kernel.org/linux-pm/f78e6b70-a963-c0ca-a4b2-0d4c6aeef1fb@linaro.org/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-02net: ethernet: mtk_eth_soc: fix remaining throughput regressionFelix Fietkau
Based on further tests, it seems that the QDMA shaper is not able to perform shaping close to the MAC link rate without throughput loss. This cannot be compensated by increasing the shaping rate, so it seems to be an internal limit. Fix the remaining throughput regression by detecting that condition and limiting shaping to ports with lower link speed. This patch intentionally ignores link speed gain from TRGMII, because even on such links, shaping to 1000 Mbit/s incurs some throughput degradation. Fixes: f63959c7eec3 ("net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queues") Tested-By: Frank Wunderlich <frank-w@public-files.de> Reported-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-02net: dsa: mv88e6xxx: Reset mv88e6393x force WD event bitGustav Ekelund
The force watchdog event bit is not cleared during SW reset in the mv88e6393x switch. This is a different behavior compared to mv886390 which clears the force WD event bit as advertised. This causes a force WD event to be handled over and over again as the SW reset following the event never clears the force WD event bit. Explicitly clear the watchdog event register to 0 in irq_action when handling an event to prevent the switch from sending continuous interrupts. Marvell aren't aware of any other stuck bits apart from the force WD bit. Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family" Signed-off-by: Gustav Ekelund <gustaek@axis.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-02net: minor reshuffle of napi_structJakub Kicinski
napi_id is read by GRO and drivers to mark skbs, and it currently sits at the end of the structure, in a mostly unused cache line. Move it up into a hole, and separate the clearly control path fields from the important ones. Before: struct napi_struct { struct list_head poll_list; /* 0 16 */ long unsigned int state; /* 16 8 */ int weight; /* 24 4 */ int defer_hard_irqs_count; /* 28 4 */ long unsigned int gro_bitmask; /* 32 8 */ int (*poll)(struct napi_struct *, int); /* 40 8 */ int poll_owner; /* 48 4 */ /* XXX 4 bytes hole, try to pack */ struct net_device * dev; /* 56 8 */ /* --- cacheline 1 boundary (64 bytes) --- */ struct gro_list gro_hash[8]; /* 64 192 */ /* --- cacheline 4 boundary (256 bytes) --- */ struct sk_buff * skb; /* 256 8 */ struct list_head rx_list; /* 264 16 */ int rx_count; /* 280 4 */ /* XXX 4 bytes hole, try to pack */ struct hrtimer timer; /* 288 64 */ /* XXX last struct has 4 bytes of padding */ /* --- cacheline 5 boundary (320 bytes) was 32 bytes ago --- */ struct list_head dev_list; /* 352 16 */ struct hlist_node napi_hash_node; /* 368 16 */ /* --- cacheline 6 boundary (384 bytes) --- */ unsigned int napi_id; /* 384 4 */ /* XXX 4 bytes hole, try to pack */ struct task_struct * thread; /* 392 8 */ /* size: 400, cachelines: 7, members: 17 */ /* sum members: 388, holes: 3, sum holes: 12 */ /* paddings: 1, sum paddings: 4 */ /* last cacheline: 16 bytes */ }; After: struct napi_struct { struct list_head poll_list; /* 0 16 */ long unsigned int state; /* 16 8 */ int weight; /* 24 4 */ int defer_hard_irqs_count; /* 28 4 */ long unsigned int gro_bitmask; /* 32 8 */ int (*poll)(struct napi_struct *, int); /* 40 8 */ int poll_owner; /* 48 4 */ /* XXX 4 bytes hole, try to pack */ struct net_device * dev; /* 56 8 */ /* --- cacheline 1 boundary (64 bytes) --- */ struct gro_list gro_hash[8]; /* 64 192 */ /* --- cacheline 4 boundary (256 bytes) --- */ struct sk_buff * skb; /* 256 8 */ struct list_head rx_list; /* 264 16 */ int rx_count; /* 280 4 */ unsigned int napi_id; /* 284 4 */ struct hrtimer timer; /* 288 64 */ /* XXX last struct has 4 bytes of padding */ /* --- cacheline 5 boundary (320 bytes) was 32 bytes ago --- */ struct task_struct * thread; /* 352 8 */ struct list_head dev_list; /* 360 16 */ struct hlist_node napi_hash_node; /* 376 16 */ /* size: 392, cachelines: 7, members: 17 */ /* sum members: 388, holes: 1, sum holes: 4 */ /* paddings: 1, sum paddings: 4 */ /* forced alignments: 1 */ /* last cacheline: 8 bytes */ } __attribute__((__aligned__(8))); Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-02net: don't let netpoll invoke NAPI if in xmit contextJakub Kicinski
Commit 0db3dc73f7a3 ("[NETPOLL]: tx lock deadlock fix") narrowed down the region under netif_tx_trylock() inside netpoll_send_skb(). (At that point in time netif_tx_trylock() would lock all queues of the device.) Taking the tx lock was problematic because driver's cleanup method may take the same lock. So the change made us hold the xmit lock only around xmit, and expected the driver to take care of locking within ->ndo_poll_controller(). Unfortunately this only works if netpoll isn't itself called with the xmit lock already held. Netpoll code is careful and uses trylock(). The drivers, however, may be using plain lock(). Printing while holding the xmit lock is going to result in rare deadlocks. Luckily we record the xmit lock owners, so we can scan all the queues, the same way we scan NAPI owners. If any of the xmit locks is held by the local CPU we better not attempt any polling. It would be nice if we could narrow down the check to only the NAPIs and the queue we're trying to use. I don't see a way to do that now. Reported-by: Roman Gushchin <roman.gushchin@linux.dev> Fixes: 0db3dc73f7a3 ("[NETPOLL]: tx lock deadlock fix") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-02i40e: Add support for VF to specify its primary MAC addressSylwester Dziedziuch
Currently in the i40e driver there is no implementation of different MAC address handling depending on whether it is a legacy or primary. Introduce new checks for VF to be able to specify its primary MAC address based on the VIRTCHNL_ETHER_ADDR_PRIMARY type. Primary MAC address are treated differently compared to legacy ones in a scenario where: 1. If a unicast MAC is being added and it's specified as VIRTCHNL_ETHER_ADDR_PRIMARY, then replace the current default_lan_addr.addr. 2. If a unicast MAC is being deleted and it's type is specified as VIRTCHNL_ETHER_ADDR_PRIMARY, then zero the hw_lan_addr.addr. Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-029p/xen : Fix use after free bug in xen_9pfs_front_remove due to race conditionZheng Wang
In xen_9pfs_front_probe, it calls xen_9pfs_front_alloc_dataring to init priv->rings and bound &ring->work with p9_xen_response. When it calls xen_9pfs_front_event_handler to handle IRQ requests, it will finally call schedule_work to start the work. When we call xen_9pfs_front_remove to remove the driver, there may be a sequence as follows: Fix it by finishing the work before cleanup in xen_9pfs_front_free. Note that, this bug is found by static analysis, which might be false positive. CPU0 CPU1 |p9_xen_response xen_9pfs_front_remove| xen_9pfs_front_free| kfree(priv) | //free priv | |p9_tag_lookup |//use priv->client Fixes: 71ebd71921e4 ("xen/9pfs: connect to the backend") Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
2023-04-01io_uring: fix memory leak when removing provided buffersWojciech Lukowicz
When removing provided buffers, io_buffer structs are not being disposed of, leading to a memory leak. They can't be freed individually, because they are allocated in page-sized groups. They need to be added to some free list instead, such as io_buffers_cache. All callers already hold the lock protecting it, apart from when destroying buffers, so had to extend the lock there. Fixes: cc3cec8367cb ("io_uring: speedup provided buffer handling") Signed-off-by: Wojciech Lukowicz <wlukowicz01@gmail.com> Link: https://lore.kernel.org/r/20230401195039.404909-2-wlukowicz01@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-01io_uring: fix return value when removing provided buffersWojciech Lukowicz
When a request to remove buffers is submitted, and the given number to be removed is larger than available in the specified buffer group, the resulting CQE result will be the number of removed buffers + 1, which is 1 more than it should be. Previously, the head was part of the list and it got removed after the loop, so the increment was needed. Now, the head is not an element of the list, so the increment shouldn't be there anymore. Fixes: dbc7d452e7cf ("io_uring: manage provided buffers strictly ordered") Signed-off-by: Wojciech Lukowicz <wlukowicz01@gmail.com> Link: https://lore.kernel.org/r/20230401195039.404909-2-wlukowicz01@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-01bpf: optimize hashmap lookups when key_size is divisible by 4Anton Protopopov
The BPF hashmap uses the jhash() hash function. There is an optimized version of this hash function which may be used if hash size is a multiple of 4. Apply this optimization to the hashmap in a similar way as it is done in the bloom filter map. On practice the optimization is only noticeable for smaller key sizes, which, however, is sufficient for many applications. An example is listed in the following table of measurements (a hashmap of 65536 elements was used): -------------------------------------------------------------------- | key_size | fullness | lookups /sec | lookups (opt) /sec | gain | -------------------------------------------------------------------- | 4 | 25% | 42.990M | 46.000M | 7.0% | | 4 | 50% | 37.910M | 39.094M | 3.1% | | 4 | 75% | 34.486M | 36.124M | 4.7% | | 4 | 100% | 31.760M | 32.719M | 3.0% | -------------------------------------------------------------------- | 8 | 25% | 43.855M | 49.626M | 13.2% | | 8 | 50% | 38.328M | 42.152M | 10.0% | | 8 | 75% | 34.483M | 38.088M | 10.5% | | 8 | 100% | 31.306M | 34.686M | 10.8% | -------------------------------------------------------------------- | 12 | 25% | 38.398M | 43.770M | 14.0% | | 12 | 50% | 33.336M | 37.712M | 13.1% | | 12 | 75% | 29.917M | 34.440M | 15.1% | | 12 | 100% | 27.322M | 30.480M | 11.6% | -------------------------------------------------------------------- | 16 | 25% | 41.491M | 41.921M | 1.0% | | 16 | 50% | 36.206M | 36.474M | 0.7% | | 16 | 75% | 32.529M | 33.027M | 1.5% | | 16 | 100% | 29.581M | 30.325M | 2.5% | -------------------------------------------------------------------- | 20 | 25% | 34.240M | 36.787M | 7.4% | | 20 | 50% | 30.328M | 32.663M | 7.7% | | 20 | 75% | 27.536M | 29.354M | 6.6% | | 20 | 100% | 24.847M | 26.505M | 6.7% | -------------------------------------------------------------------- | 24 | 25% | 36.329M | 40.608M | 11.8% | | 24 | 50% | 31.444M | 35.059M | 11.5% | | 24 | 75% | 28.426M | 31.452M | 10.6% | | 24 | 100% | 26.278M | 28.741M | 9.4% | -------------------------------------------------------------------- | 28 | 25% | 31.540M | 31.944M | 1.3% | | 28 | 50% | 27.739M | 28.063M | 1.2% | | 28 | 75% | 24.993M | 25.814M | 3.3% | | 28 | 100% | 23.513M | 23.500M | -0.1% | -------------------------------------------------------------------- | 32 | 25% | 32.116M | 33.953M | 5.7% | | 32 | 50% | 28.879M | 29.859M | 3.4% | | 32 | 75% | 26.227M | 26.948M | 2.7% | | 32 | 100% | 23.829M | 24.613M | 3.3% | -------------------------------------------------------------------- | 64 | 25% | 22.535M | 22.554M | 0.1% | | 64 | 50% | 20.471M | 20.675M | 1.0% | | 64 | 75% | 19.077M | 19.146M | 0.4% | | 64 | 100% | 17.710M | 18.131M | 2.4% | -------------------------------------------------------------------- The following script was used to gather the results (SMT & frequency off): cd tools/testing/selftests/bpf for key_size in 4 8 12 16 20 24 28 32 64; do for nr_entries in `seq 16384 16384 65536`; do fullness=$(printf '%3s' $((nr_entries*100/65536))) echo -n "key_size=$key_size: $fullness% full: " sudo ./bench -d2 -a bpf-hashmap-lookup --key_size=$key_size --nr_entries=$nr_entries --max_entries=65536 --nr_loops=2000000 --map_flags=0x40 | grep cpu done echo done Signed-off-by: Anton Protopopov <aspsk@isovalent.com> Link: https://lore.kernel.org/r/20230401200602.3275-1-aspsk@isovalent.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-04-01Merge tag '6.3-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs client fixes from Steve French: "Four cifs/smb3 client (reconnect and DFS related) fixes, including two for stable: - DFS oops fix - DFS reconnect recursion fix - An SMB1 parallel reconnect fix - Trivial dead code removal in smb2_reconnect" * tag '6.3-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: get rid of dead check in smb2_reconnect() cifs: prevent infinite recursion in CIFSGetDFSRefer() cifs: avoid races in parallel reconnects in smb1 cifs: fix DFS traversal oops without CONFIG_CIFS_DFS_UPCALL
2023-04-01Merge tag 'input-for-v6.3-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - fixes to ALPS and Focaltech PS/2 drivers dealing with the breakage of switching to -funsigned-char - quirks to i8042 to better handle Lifebook A574/H and TUXEDO devices - a quirk to Goodix touchscreen driver to handle Yoga Book X90F - a fix for incorrectly merged patch to xpad game controller driver * tag 'input-for-v6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - add TUXEDO devices to i8042 quirk tables for partial fix Input: alps - fix compatibility with -funsigned-char Input: focaltech - use explicitly signed char type Input: xpad - fix incorrectly applied patch for MAP_PROFILE_BUTTON Input: goodix - add Lenovo Yoga Book X90F to nine_bytes_report DMI table Input: i8042 - add quirk for Fujitsu Lifebook A574/H
2023-04-01Merge tag 'pinctrl-v6.3-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Some pin control fixes for the v6.3 series. The most notable and urgent one is probably the AMD fix which affects AMD laptops, found by the Chromium people. Summary: - Fix up the Kconfig options for MediaTek MT7981 - Fix the irq domain name in the AT91-PIO4 driver - Fix some alternative muxing modes in the Ocelot driver - Allocate the GPIO numbers dynamically in the STM32 driver - Disable and mask interrupts on resume in the AMD driver - Fix a typo in the Qualcomm SM8550 pin control device tree bindings" * tag 'pinctrl-v6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: dt-bindings: pinctrl: qcom,sm8550-lpass-lpi: allow input-enabled and bias-bus-hold pinctrl: amd: Disable and mask interrupts on resume pinctrl: stm32: use dynamic allocation of GPIO base pinctrl: ocelot: Fix alt mode for ocelot pinctrl: at91-pio4: fix domain name assignment pinctrl: mediatek: fix naming inconsistency pinctrl: mediatek: add missing options to PINCTRL_MT7981
2023-04-01Merge tag 'kbuild-fixes-v6.3-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix linux-headers debian package - Fix a merge_config.sh error due to a misspelled variable - Fix modversion for 32-bit build machines * tag 'kbuild-fixes-v6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: modpost: Fix processing of CRCs on 32-bit build machines scripts: merge_config: Fix typo in variable name. kbuild: deb-pkg: set version for linux-headers paths
2023-04-01Merge tag 'iommu-fixes-6.3-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - Maintainer update for S390 IOMMU driver - A fix for the set_platform_dma_ops() call-back in the Exynos IOMMU driver - Intel VT-d fixes from Lu Baolu: - Fix a lockdep splat - Fix a supplement of the specification - Fix a warning in perfmon code * tag 'iommu-fixes-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Fix an IOMMU perfmon warning when CPU hotplug iommu/vt-d: Allow zero SAGAW if second-stage not supported iommu/vt-d: Remove unnecessary locking in intel_irq_remapping_alloc() iommu/exynos: Fix set_platform_dma_ops() callback MAINTAINERS: Update s390-iommu driver maintainer information
2023-04-01Merge branch 'Enable RCU semantics for task kptrs'Alexei Starovoitov
David Vernet says: ==================== In commit 22df776a9a86 ("tasks: Extract rcu_users out of union"), the 'refcount_t rcu_users' field was extracted out of a union with the 'struct rcu_head rcu' field. This allows us to use the field for refcounting struct task_struct with RCU protection, as the RCU callback no longer flips rcu_users to be nonzero after the callback is scheduled. This patch set leverages this to do a few things: 1. Marks struct task_struct as RCU safe in the verifier, allowing referenced kptr tasks stored in maps to be accessed in an RCU read region without acquiring a reference (with just a NULL check). 2. Makes bpf_task_acquire() a KF_ACQUIRE | KF_RCU | KF_RET_NULL kfunc. 3. Removes bpf_task_kptr_get() and bpf_task_acquire_not_zero(), as they're now redundant with the above two changes. 4. Updates selftests and documentation accordingly. --- Changelog: v1: https://lore.kernel.org/all/20230331005733.406202-1-void@manifault.com/ v1 -> v2: - Remove testcases validating nested trust inheritance. The first version used 'struct task_struct __rcu *parent', but because that field has the __rcu tag it functions differently on gcc and llvm and causes gcc selftests to fail. Alexei is reworking nested trust, anyways so let's leave it off for now (Alexei). ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-04-01bpf,docs: Update documentation to reflect new task kfuncsDavid Vernet
Now that struct task_struct objects are RCU safe, and bpf_task_acquire() can return NULL, we should update the BPF task kfunc documentation to reflect the current state of the API. Signed-off-by: David Vernet <void@manifault.com> Link: https://lore.kernel.org/r/20230331195733.699708-4-void@manifault.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-04-01bpf: Remove now-defunct task kfuncsDavid Vernet
In commit 22df776a9a86 ("tasks: Extract rcu_users out of union"), the 'refcount_t rcu_users' field was extracted out of a union with the 'struct rcu_head rcu' field. This allows us to safely perform a refcount_inc_not_zero() on task->rcu_users when acquiring a reference on a task struct. A prior patch leveraged this by making struct task_struct an RCU-protected object in the verifier, and by bpf_task_acquire() to use the task->rcu_users field for synchronization. Now that we can use RCU to protect tasks, we no longer need bpf_task_kptr_get(), or bpf_task_acquire_not_zero(). bpf_task_kptr_get() is truly completely unnecessary, as we can just use RCU to get the object. bpf_task_acquire_not_zero() is now equivalent to bpf_task_acquire(). In addition to these changes, this patch also updates the associated selftests to no longer use these kfuncs. Signed-off-by: David Vernet <void@manifault.com> Link: https://lore.kernel.org/r/20230331195733.699708-3-void@manifault.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-04-01bpf: Make struct task_struct an RCU-safe typeDavid Vernet
struct task_struct objects are a bit interesting in terms of how their lifetime is protected by refcounts. task structs have two refcount fields: 1. refcount_t usage: Protects the memory backing the task struct. When this refcount drops to 0, the task is immediately freed, without waiting for an RCU grace period to elapse. This is the field that most callers in the kernel currently use to ensure that a task remains valid while it's being referenced, and is what's currently tracked with bpf_task_acquire() and bpf_task_release(). 2. refcount_t rcu_users: A refcount field which, when it drops to 0, schedules an RCU callback that drops a reference held on the 'usage' field above (which is acquired when the task is first created). This field therefore provides a form of RCU protection on the task by ensuring that at least one 'usage' refcount will be held until an RCU grace period has elapsed. The qualifier "a form of" is important here, as a task can remain valid after task->rcu_users has dropped to 0 and the subsequent RCU gp has elapsed. In terms of BPF, we want to use task->rcu_users to protect tasks that function as referenced kptrs, and to allow tasks stored as referenced kptrs in maps to be accessed with RCU protection. Let's first determine whether we can safely use task->rcu_users to protect tasks stored in maps. All of the bpf_task* kfuncs can only be called from tracepoint, struct_ops, or BPF_PROG_TYPE_SCHED_CLS, program types. For tracepoint and struct_ops programs, the struct task_struct passed to a program handler will always be trusted, so it will always be safe to call bpf_task_acquire() with any task passed to a program. Note, however, that we must update bpf_task_acquire() to be KF_RET_NULL, as it is possible that the task has exited by the time the program is invoked, even if the pointer is still currently valid because the main kernel holds a task->usage refcount. For BPF_PROG_TYPE_SCHED_CLS, tasks should never be passed as an argument to the any program handlers, so it should not be relevant. The second question is whether it's safe to use RCU to access a task that was acquired with bpf_task_acquire(), and stored in a map. Because bpf_task_acquire() now uses task->rcu_users, it follows that if the task is present in the map, that it must have had at least one task->rcu_users refcount by the time the current RCU cs was started. Therefore, it's safe to access that task until the end of the current RCU cs. With all that said, this patch makes struct task_struct is an RCU-protected object. In doing so, we also change bpf_task_acquire() to be KF_ACQUIRE | KF_RCU | KF_RET_NULL, and adjust any selftests as necessary. A subsequent patch will remove bpf_task_kptr_get(), and bpf_task_acquire_not_zero() respectively. Signed-off-by: David Vernet <void@manifault.com> Link: https://lore.kernel.org/r/20230331195733.699708-2-void@manifault.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-04-01Merge branch 'Prepare veristat for packaging'Alexei Starovoitov
Andrii Nakryiko says: ==================== This patch set relicenses veristat.c to dual GPL-2.0/BSD-2 license and prepares it to be mirrored to Github at libbpf/veristat repo. Few small issues in the source code are fixed, found during Github sync preparetion. v2->v3: - fix few warnings about uninitialized variable uses; v1->v2: - drop linux/compiler.h and define own ARRAY_SIZE macro; ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-04-01veristat: small fixed found in -O2 modeAndrii Nakryiko
Fix few potentially unitialized variables uses, found while building veristat.c in release (-O2) mode. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20230331222405.3468634-5-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-04-01veristat: avoid using kernel-internal headersAndrii Nakryiko
Drop linux/compiler.h include, which seems to be needed for ARRAY_SIZE macro only. Redefine own version of ARRAY_SIZE instead. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20230331222405.3468634-4-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-04-01veristat: improve version reportingAndrii Nakryiko
For packaging version of the tool is important, so add a simple way to specify veristat version for upstream mirror at Github. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20230331222405.3468634-3-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-04-01veristat: relicense veristat.c as dual GPL-2.0-only or BSD-2-Clause licensedAndrii Nakryiko
Dual-license veristat.c to dual GPL-2.0-only or BSD-2-Clause license. This is needed to mirror it to Github to make it convenient for distro packagers to package veristat as a separate package. Veristat grew into a useful tool by itself, and there are already a bunch of users relying on veristat as generic BPF loading and verification helper tool. So making it easy to packagers by providing Github mirror just like we do for bpftool and libbpf is the next step to get veristat into the hands of users. Apart from few typo fixes, I'm the sole contributor to veristat.c so far, so no extra Acks should be needed for relicensing. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20230331222405.3468634-2-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-04-01ALSA: hda/hdmi: Preserve the previous PCM device upon re-enablementTakashi Iwai
When a DRM driver turns on or off the screen with the audio capability, it notifies the ELD to HD-audio HDMI codec driver via component ops. HDMI codec driver, in turn, attaches or detaches the PCM stream for the given port on the fly. The problem is that, since the recent code change, the HDMI driver always treats the PCM stream assignment dynamically; this ended up the confusion of the PCM device appearance. e.g. when a screen goes once off and on again, it may appear on a different PCM device before the screen-off. Although the application should treat such a change, it doesn't seem working gracefully with the current pipewire (maybe PulseAudio, too). As a workaround, this patch changes the HDMI codec driver behavior slightly to be more consistent. Now it remembers the previous PCM slot for the given port and try to assign to it. That is, if a port is re-enabled, the driver tries to use the same PCM slot that was assigned to that port previously. If it conflicts, a new slot is searched and used like before, instead. Note that multiple monitor connections are the only typical case where the PCM slot preservation is effective. As long as only a single monitor is connected, the behavior isn't changed, and the first PCM slot is still assigned always. Fixes: ef6f5494faf6 ("ALSA: hda/hdmi: Use only dynamic PCM device allocation") Reviewed-by: Jaroslav Kysela <perex@perex.cz> Link: https://bugzilla.kernel.org/show_bug.cgi?id=217259 Link: https://lore.kernel.org/r/20230331142217.19791-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-03-31Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-03-30 (documentation, ice) This series contains updates to driver documentation and the ice driver. Tony removes links and addresses related to the out-of-tree driver from the Intel ethernet driver documentation. Jake removes a comment that is no longer valid to the ice driver. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: remove comment about not supporting driver reinit Documentation/eth/intel: Remove references to SourceForge Documentation/eth/intel: Update address for driver support ==================== Link: https://lore.kernel.org/r/20230330165935.2503604-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-31icmp: guard against too small mtuEric Dumazet
syzbot was able to trigger a panic [1] in icmp_glue_bits(), or more exactly in skb_copy_and_csum_bits() There is no repro yet, but I think the issue is that syzbot manages to lower device mtu to a small value, fooling __icmp_send() __icmp_send() must make sure there is enough room for the packet to include at least the headers. We might in the future refactor skb_copy_and_csum_bits() and its callers to no longer crash when something bad happens. [1] kernel BUG at net/core/skbuff.c:3343 ! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 15766 Comm: syz-executor.0 Not tainted 6.3.0-rc4-syzkaller-00039-gffe78bbd5121 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 RIP: 0010:skb_copy_and_csum_bits+0x798/0x860 net/core/skbuff.c:3343 Code: f0 c1 c8 08 41 89 c6 e9 73 ff ff ff e8 61 48 d4 f9 e9 41 fd ff ff 48 8b 7c 24 48 e8 52 48 d4 f9 e9 c3 fc ff ff e8 c8 27 84 f9 <0f> 0b 48 89 44 24 28 e8 3c 48 d4 f9 48 8b 44 24 28 e9 9d fb ff ff RSP: 0018:ffffc90000007620 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000001e8 RCX: 0000000000000100 RDX: ffff8880276f6280 RSI: ffffffff87fdd138 RDI: 0000000000000005 RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000 R10: 00000000000001e8 R11: 0000000000000001 R12: 000000000000003c R13: 0000000000000000 R14: ffff888028244868 R15: 0000000000000b0e FS: 00007fbc81f1c700(0000) GS:ffff88802ca00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2df43000 CR3: 00000000744db000 CR4: 0000000000150ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> icmp_glue_bits+0x7b/0x210 net/ipv4/icmp.c:353 __ip_append_data+0x1d1b/0x39f0 net/ipv4/ip_output.c:1161 ip_append_data net/ipv4/ip_output.c:1343 [inline] ip_append_data+0x115/0x1a0 net/ipv4/ip_output.c:1322 icmp_push_reply+0xa8/0x440 net/ipv4/icmp.c:370 __icmp_send+0xb80/0x1430 net/ipv4/icmp.c:765 ipv4_send_dest_unreach net/ipv4/route.c:1239 [inline] ipv4_link_failure+0x5a9/0x9e0 net/ipv4/route.c:1246 dst_link_failure include/net/dst.h:423 [inline] arp_error_report+0xcb/0x1c0 net/ipv4/arp.c:296 neigh_invalidate+0x20d/0x560 net/core/neighbour.c:1079 neigh_timer_handler+0xc77/0xff0 net/core/neighbour.c:1166 call_timer_fn+0x1a0/0x580 kernel/time/timer.c:1700 expire_timers+0x29b/0x4b0 kernel/time/timer.c:1751 __run_timers kernel/time/timer.c:2022 [inline] Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+d373d60fddbdc915e666@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230330174502.1915328-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-15 02:56:40 +0000