| Age | Commit message (Collapse) | Author |
|---|
|
Pull io_uring fix from Jens Axboe:
"Just a single fix, annotating the fdinfo side SQ/CQ head/tail reads
with data_race() as they are known racy.
Only serves to silence syzbot testing, by definition these debug
outputs are going to be racy as they may change as soon as we've read
them"
* tag 'io_uring-6.15-20250502' of git://git.kernel.dk/linux:
io_uring/fdinfo: annotate racy sq/cq head/tail reads
|
|
Pull bcachefs fixes from Kent Overstreet:
"Lots of assorted small fixes...
- Some repair path fixes, a fix for -ENOMEM when reconstructing lots
of alloc info on large filesystems, upgrade for ancient 0.14
filesystems, etc.
- Various assert tweaks; assert -> ERO, ERO -> log the error in the
superblock and continue
- casefolding now uses d_ops like on other casefolding filesystems
- fix device label create on device add, fix bucket array resize on
filesystem resize
- fix xattrs with FORTIFY_SOURCE builds with gcc-15/clang"
* tag 'bcachefs-2025-05-01' of git://evilpiepirate.org/bcachefs: (22 commits)
bcachefs: Remove incorrect __counted_by annotation
bcachefs: add missing sched_annotate_sleep()
bcachefs: Fix __bch2_dev_group_set()
bcachefs: Kill ERO for i_blocks check in truncate
bcachefs: check for inode.bi_sectors underflow
bcachefs: Kill ERO in __bch2_i_sectors_acct()
bcachefs: readdir fixes
bcachefs: improve missing journal write device error message
bcachefs: Topology error after insert is now an ERO
bcachefs: Use bch2_kvmalloc() for journal keys array
bcachefs: More informative error message when shutting down due to error
bcachefs: btree_root_unreadable_and_scan_found_nothing autofix for non data btrees
bcachefs: btree_node_data_missing is now autofix
bcachefs: Don't generate alloc updates to invalid buckets
bcachefs: Improve bch2_dev_bucket_missing()
bcachefs: fix bch2_dev_buckets_resize()
bcachefs: Add upgrade table entry from 0.14
bcachefs: Run BCH_RECOVERY_PASS_reconstruct_snapshots on missing subvol -> snapshot
bcachefs: Add missing utf8_unload()
bcachefs: Emit unicode version message on startup
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix potential NULL dereference in the i.MX driver
- Fix the pull up/down resistor values in the Meson driver
- Fix the mapping of the PHY LED pins in the Airhoa driver
- Fix EINT interrupts on older controllers and a debounce value issue
in the Mediatek driver
- Fix an erronoeus PINGROUP define in the Qualcomm driver
* tag 'pinctrl-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: Fix PINGROUP definition for sm8750
pinctrl: mediatek: common-v1: Fix error checking in mtk_eint_init()
pinctrl: mediatek: Fix new design debounce issue
pinctrl: mediatek: common-v1: Fix EINT breakage on older controllers
pinctrl: airoha: fix wrong PHY LED mapping and PHY2 LED defines
pinctrl: meson: define the pull up/down resistor value as 60 kOhm
pinctrl: imx: Return NULL if no group is matched and found
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
"ARM-SMMU fixes:
- Fix broken detection of the S2FWB feature
- Ensure page-size bitmap is initialised for SVA domains
- Fix handling of SMMU client devices with duplicate Stream IDs
- Don't fail SMMU probe if Stream IDs are aliased across clients
Intel VT-d fixes:
- Add quirk for IGFX device
- Revert an ATS change to fix a boot failure
AMD IOMMU:
- Fix potential buffer overflow
Core:
- Fix for iommu_copy_struct_from_user()"
* tag 'iommu-fixes-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/vt-d: Apply quirk_iommu_igfx for 8086:0044 (QM57/QS57)
iommu/vt-d: Revert ATS timing change to fix boot failure
iommu: Fix two issues in iommu_copy_struct_from_user()
iommu/amd: Fix potential buffer overflow in parse_ivrs_acpihid
iommu/arm-smmu-v3: Fail aliasing StreamIDs more gracefully
iommu/arm-smmu-v3: Fix iommu_device_probe bug due to duplicated stream ids
iommu/arm-smmu-v3: Fix pgsize_bit for sva domains
iommu/arm-smmu-v3: Add missing S2FWB feature detection
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
- Stable fix to avoid bugs due to leftover obj_ext after allocation
profiling is disabled at runtime (Zhenhua Huang)
* tag 'slab-for-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm, slab: clean up slab->obj_exts always
|
|
This actually reverts 86e92eeeb237 ("bcachefs: Annotate struct bch_xattr
with __counted_by()").
After the x_name, there is a value. According to the disscussion[1],
__counted_by assumes that the flexible array member contains exactly
the amount of elements that are specified. Now there are users came across
a false positive detection of an out of bounds write caused by
the __counted_by here[2], so revert that.
[1] https://lore.kernel.org/lkml/Zv8VDKWN1GzLRT-_@archlinux/T/#m0ce9541c5070146320efd4f928cc1ff8de69e9b2
[2] https://privatebin.net/?a0d4e97d590d71e1#9bLmp2Kb5NU6X6cZEucchDcu88HzUQwHUah8okKPReEt
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
00594 ------------[ cut here ]------------
00594 do not call blocking ops when !TASK_RUNNING; state=2 set at [<000000003e51ef4a>] prepare_to_wait_event+0x5c/0x1c0
00594 WARNING: CPU: 12 PID: 1117 at kernel/sched/core.c:8741 __might_sleep+0x74/0x88
00594 Modules linked in:
00594 CPU: 12 UID: 0 PID: 1117 Comm: umount Not tainted 6.15.0-rc4-ktest-g3a72e369412d #21845 PREEMPT
00594 Hardware name: linux,dummy-virt (DT)
00594 pstate: 60001005 (nZCv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--)
00594 pc : __might_sleep+0x74/0x88
00594 lr : __might_sleep+0x74/0x88
00594 sp : ffffff80c8d67a90
00594 x29: ffffff80c8d67a90 x28: ffffff80f5903500 x27: 0000000000000000
00594 x26: 0000000000000000 x25: ffffff80cf5002a0 x24: ffffffc087dad000
00594 x23: ffffff80c8d67b40 x22: 0000000000000000 x21: 0000000000000000
00594 x20: 0000000000000242 x19: ffffffc080b92020 x18: 00000000ffffffff
00594 x17: 30303c5b20746120 x16: 74657320323d6574 x15: 617473203b474e49
00594 x14: 0000000000000001 x13: 00000000000c0000 x12: ffffff80facc0000
00594 x11: 0000000000000001 x10: 0000000000000001 x9 : ffffffc0800b0774
00594 x8 : c0000000fffbffff x7 : ffffffc087dac670 x6 : 00000000015fffa8
00594 x5 : ffffff80facbffa8 x4 : ffffff80fbd30b90 x3 : 0000000000000000
00594 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffff80f5903500
00594 Call trace:
00594 __might_sleep+0x74/0x88 (P)
00594 __mutex_lock+0x64/0x8d8
00594 mutex_lock_nested+0x28/0x38
00594 bch2_fs_ec_flush+0xf8/0x128
00594 __bch2_fs_read_only+0x54/0x1d8
00594 bch2_fs_read_only+0x3e0/0x438
00594 __bch2_fs_stop+0x5c/0x250
00594 bch2_put_super+0x18/0x28
00594 generic_shutdown_super+0x6c/0x140
00594 bch2_kill_sb+0x1c/0x38
00594 deactivate_locked_super+0x54/0xd0
00594 deactivate_super+0x70/0x90
00594 cleanup_mnt+0xec/0x188
00594 __cleanup_mnt+0x18/0x28
00594 task_work_run+0x90/0xd8
00594 do_notify_resume+0x138/0x148
00594 el0_svc+0x9c/0xa0
00594 el0t_64_sync_handler+0x104/0x130
00594 el0t_64_sync+0x154/0x158
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Happy May Day.
Things have calmed down on our end (knock on wood), no outstanding
investigations. Including fixes from Bluetooth and WiFi.
Current release - fix to a fix:
- igc: fix lock order in igc_ptp_reset
Current release - new code bugs:
- Revert "wifi: iwlwifi: make no_160 more generic", fixes regression
to Killer line of devices reported by a number of people
- Revert "wifi: iwlwifi: add support for BE213", initial FW is too
buggy
- number of fixes for mld, the new Intel WiFi subdriver
Previous releases - regressions:
- wifi: mac80211: restore monitor for outgoing frames
- drv: vmxnet3: fix malformed packet sizing in vmxnet3_process_xdp
- eth: bnxt_en: fix timestamping FIFO getting out of sync on reset,
delivering stale timestamps
- use sock_gen_put() in the TCP fraglist GRO heuristic, don't assume
every socket is a full socket
Previous releases - always broken:
- sched: adapt qdiscs for reentrant enqueue cases, fix list
corruptions
- xsk: fix race condition in AF_XDP generic RX path, shared UMEM
can't be protected by a per-socket lock
- eth: mtk-star-emac: fix spinlock recursion issues on rx/tx poll
- btusb: avoid NULL pointer dereference in skb_dequeue()
- dsa: felix: fix broken taprio gate states after clock jump"
* tag 'net-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
net: vertexcom: mse102x: Fix RX error handling
net: vertexcom: mse102x: Add range check for CMD_RTS
net: vertexcom: mse102x: Fix LEN_MASK
net: vertexcom: mse102x: Fix possible stuck of SPI interrupt
net: hns3: defer calling ptp_clock_register()
net: hns3: fixed debugfs tm_qset size
net: hns3: fix an interrupt residual problem
net: hns3: store rx VLAN tag offload state for VF
octeon_ep: Fix host hang issue during device reboot
net: fec: ERR007885 Workaround for conventional TX
net: lan743x: Fix memleak issue when GSO enabled
ptp: ocp: Fix NULL dereference in Adva board SMA sysfs operations
net: use sock_gen_put() when sk_state is TCP_TIME_WAIT
bnxt_en: fix module unload sequence
bnxt_en: Fix ethtool -d byte order for 32-bit values
bnxt_en: Fix out-of-bound memcpy() during ethtool -w
bnxt_en: Fix coredump logic to free allocated buffer
bnxt_en: delay pci_alloc_irq_vectors() in the AER path
bnxt_en: call pci_alloc_irq_vectors() after bnxt_reserve_rings()
bnxt_en: Add missing skb_mark_for_recycle() in bnxt_rx_vlan()
...
|
|
bch2_sb_disk_groups_to_cpu() goes off of the superblock member info, so
we need to set that first.
Reported-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Stefan Wahren says:
====================
net: vertexcom: mse102x: Fix RX handling
This series is the first part of two series for the Vertexcom driver.
It contains substantial fixes for the RX handling of the Vertexcom MSE102x.
====================
Link: https://patch.msgid.link/20250430133043.7722-1-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In case the CMD_RTS got corrupted by interferences, the MSE102x
doesn't allow a retransmission of the command. Instead the Ethernet
frame must be shifted out of the SPI FIFO. Since the actual length is
unknown, assume the maximum possible value.
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250430133043.7722-5-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since there is no protection in the SPI protocol against electrical
interferences, the driver shouldn't blindly trust the length payload
of CMD_RTS. So introduce a bounds check for incoming frames.
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250430133043.7722-4-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The LEN_MASK for CMD_RTS doesn't cover the whole parameter mask.
The Bit 11 is reserved, so adjust LEN_MASK accordingly.
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250430133043.7722-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MSE102x doesn't provide any SPI commands for interrupt handling.
So in case the interrupt fired before the driver requests the IRQ,
the interrupt will never fire again. In order to fix this always poll
for pending packets after opening the interface.
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250430133043.7722-2-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jijie Shao says:
====================
There are some bugfix for the HNS3 ethernet driver
====================
Link: https://patch.msgid.link/20250430093052.2400464-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently the ptp_clock_register() is called before relative
ptp resource ready. It may cause unexpected result when upper
layer called the ptp API during the timewindow. Fix it by
moving the ptp_clock_register() to the function end.
Fixes: 0bf5eb788512 ("net: hns3: add support for PTP")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250430093052.2400464-5-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The size of the tm_qset file of debugfs is limited to 64 KB,
which is too small in the scenario with 1280 qsets.
The size needs to be expanded to 1 MB.
Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250430093052.2400464-4-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a VF is passthrough to a VM, and the VM is killed, the reported
interrupt may not been handled, it will remain, and won't be clear by
the nic engine even with a flr or tqp reset. When the VM restart, the
interrupt of the first vector may be dropped by the second enable_irq
in vfio, see the issue below:
https://gitlab.com/qemu-project/qemu/-/issues/2884#note_2423361621
We notice that the vfio has always behaved this way, and the interrupt
is a residue of the nic engine, so we fix the problem by moving the
vector enable process out of the enable_irq loop.
Fixes: 08a100689d4b ("net: hns3: re-organize vector handle")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250430093052.2400464-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The VF driver missed to store the rx VLAN tag strip state when
user change the rx VLAN tag offload state. And it will default
to enable the rx vlan tag strip when re-init VF device after
reset. So if user disable rx VLAN tag offload, and trig reset,
then the HW will still strip the VLAN tag from packet nad fill
into RX BD, but the VF driver will ignore it for rx VLAN tag
offload disabled. It may cause the rx VLAN tag dropped.
Fixes: b2641e2ad456 ("net: hns3: Add support of hardware rx-vlan-offload to HNS3 VF driver")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250430093052.2400464-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-04-29 (idpf, igc)
For idpf:
Michal fixes error path handling to remove memory leak.
Larysa prevents reset from being called during shutdown.
For igc:
Jake adjusts locking order to resolve sleeping in atomic context.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: fix lock order in igc_ptp_reset
idpf: protect shutdown from reset
idpf: fix potential memory leak on kcalloc() failure
====================
Link: https://patch.msgid.link/20250429221034.3909139-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the host loses heartbeat messages from the device,
the driver calls the device-specific ndo_stop function,
which frees the resources. If the driver is unloaded in
this scenario, it calls ndo_stop again, attempting to free
resources that have already been freed, leading to a host
hang issue. To resolve this, dev_close should be called
instead of the device-specific stop function.dev_close
internally calls ndo_stop to stop the network interface
and performs additional cleanup tasks. During the driver
unload process, if the device is already down, ndo_stop
is not called.
Fixes: 5cb96c29aa0e ("octeon_ep: add heartbeat monitor")
Signed-off-by: Sathesh B Edara <sedara@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250429114624.19104-1-sedara@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Activate TX hang workaround also in
fec_enet_txq_submit_skb() when TSO is not enabled.
Errata: ERR007885
Symptoms: NETDEV WATCHDOG: eth0 (fec): transmit queue 0 timed out
commit 37d6017b84f7 ("net: fec: Workaround for imx6sx enet tx hang when enable three queues")
There is a TDAR race condition for mutliQ when the software sets TDAR
and the UDMA clears TDAR simultaneously or in a small window (2-4 cycles).
This will cause the udma_tx and udma_tx_arbiter state machines to hang.
So, the Workaround is checking TDAR status four time, if TDAR cleared by
hardware and then write TDAR, otherwise don't set TDAR.
Fixes: 53bb20d1faba ("net: fec: add variable reg_desc_active to speed things up")
Signed-off-by: Mattias Barthel <mattias.barthel@atlascopco.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250429090826.3101258-1-mattiasbarthel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Always map the `skb` to the LS descriptor. Previously skb was
mapped to EXT descriptor when the number of fragments is zero with
GSO enabled. Mapping the skb to EXT descriptor prevents it from
being freed, leading to a memory leak
Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250429052527.10031-1-thangaraj.s@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On Adva boards, SMA sysfs store/get operations can call
__handle_signal_outputs() or __handle_signal_inputs() while the `irig`
and `dcf` pointers are uninitialized, leading to a NULL pointer
dereference in __handle_signal() and causing a kernel crash. Adva boards
don't use `irig` or `dcf` functionality, so add Adva-specific callbacks
`ptp_ocp_sma_adva_set_outputs()` and `ptp_ocp_sma_adva_set_inputs()` that
avoid invoking `irig` or `dcf` input/output routines.
Fixes: ef61f5528fca ("ptp: ocp: add Adva timecard support")
Signed-off-by: Sagi Maimon <maimon.sagi@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250429073320.33277-1-maimon.sagi@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It is possible for a pointer of type struct inet_timewait_sock to be
returned from the functions __inet_lookup_established() and
__inet6_lookup_established(). This can cause a crash when the
returned pointer is of type struct inet_timewait_sock and
sock_put() is called on it. The following is a crash call stack that
shows sk->sk_wmem_alloc being accessed in sk_free() during the call to
sock_put() on a struct inet_timewait_sock pointer. To avoid this issue,
use sock_gen_put() instead of sock_put() when sk->sk_state
is TCP_TIME_WAIT.
mrdump.ko ipanic() + 120
vmlinux notifier_call_chain(nr_to_call=-1, nr_calls=0) + 132
vmlinux atomic_notifier_call_chain(val=0) + 56
vmlinux panic() + 344
vmlinux add_taint() + 164
vmlinux end_report() + 136
vmlinux kasan_report(size=0) + 236
vmlinux report_tag_fault() + 16
vmlinux do_tag_recovery() + 16
vmlinux __do_kernel_fault() + 88
vmlinux do_bad_area() + 28
vmlinux do_tag_check_fault() + 60
vmlinux do_mem_abort() + 80
vmlinux el1_abort() + 56
vmlinux el1h_64_sync_handler() + 124
vmlinux > 0xFFFFFFC080011294()
vmlinux __lse_atomic_fetch_add_release(v=0xF2FFFF82A896087C)
vmlinux __lse_atomic_fetch_sub_release(v=0xF2FFFF82A896087C)
vmlinux arch_atomic_fetch_sub_release(i=1, v=0xF2FFFF82A896087C)
+ 8
vmlinux raw_atomic_fetch_sub_release(i=1, v=0xF2FFFF82A896087C)
+ 8
vmlinux atomic_fetch_sub_release(i=1, v=0xF2FFFF82A896087C) + 8
vmlinux __refcount_sub_and_test(i=1, r=0xF2FFFF82A896087C,
oldp=0) + 8
vmlinux __refcount_dec_and_test(r=0xF2FFFF82A896087C, oldp=0) + 8
vmlinux refcount_dec_and_test(r=0xF2FFFF82A896087C) + 8
vmlinux sk_free(sk=0xF2FFFF82A8960700) + 28
vmlinux sock_put() + 48
vmlinux tcp6_check_fraglist_gro() + 236
vmlinux tcp6_gro_receive() + 624
vmlinux ipv6_gro_receive() + 912
vmlinux dev_gro_receive() + 1116
vmlinux napi_gro_receive() + 196
ccmni.ko ccmni_rx_callback() + 208
ccmni.ko ccmni_queue_recv_skb() + 388
ccci_dpmaif.ko dpmaif_rxq_push_thread() + 1088
vmlinux kthread() + 268
vmlinux 0xFFFFFFC08001F30C()
Fixes: c9d1d23e5239 ("net: add heuristic for enabling TCP fraglist GRO")
Signed-off-by: Jibin Zhang <jibin.zhang@mediatek.com>
Signed-off-by: Shiming Cheng <shiming.cheng@mediatek.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250429020412.14163-1-shiming.cheng@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recent updates to the PTP part of bnxt changed the way PTP FIFO is
cleared, skbs waiting for TX timestamps are now cleared during
ndo_close() call. To do clearing procedure, the ptp structure must
exist and point to a valid address. Module destroy sequence had ptp
clear code running before netdev close causing invalid memory access and
kernel crash. Change the sequence to destroy ptp structure after device
close.
Fixes: 8f7ae5a85137 ("bnxt_en: improve TX timestamping FIFO configuration")
Reported-by: Taehee Yoo <ap420073@gmail.com>
Closes: https://lore.kernel.org/netdev/CAMArcTWDe2cd41=ub=zzvYifaYcYv-N-csxfqxUvejy_L0D6UQ@mail.gmail.com/
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Tested-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250430170343.759126-1-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace with logging the error in the superblock.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We won't be root causing this in the immediate future, and it's fairly
innocuous - so just log it in the superblock.
https://github.com/koverstreet/bcachefs/issues/869
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Clang and GCC have different behaviors around disabling warnings
included in -Wall and -Wextra and the order in which flags are
specified, which is exposed by clang's new support for
-Wunterminated-string-initialization.
$ cat test.c
const char foo[3] = "FOO";
const char bar[3] __attribute__((__nonstring__)) = "BAR";
$ clang -fsyntax-only -Wextra test.c
test.c:1:21: warning: initializer-string for character array is too long, array size is 3 but initializer has size 4 (including the null terminating character); did you mean to use the 'nonstring' attribute? [-Wunterminated-string-initialization]
1 | const char foo[3] = "FOO";
| ^~~~~
$ clang -fsyntax-only -Wextra -Wno-unterminated-string-initialization test.c
$ clang -fsyntax-only -Wno-unterminated-string-initialization -Wextra test.c
test.c:1:21: warning: initializer-string for character array is too long, array size is 3 but initializer has size 4 (including the null terminating character); did you mean to use the 'nonstring' attribute? [-Wunterminated-string-initialization]
1 | const char foo[3] = "FOO";
| ^~~~~
$ gcc -fsyntax-only -Wextra test.c
test.c:1:21: warning: initializer-string for array of ‘char’ truncates NUL terminator but destination lacks ‘nonstring’ attribute (4 chars into 3 available) [-Wunterminated-string-initialization]
1 | const char foo[3] = "FOO";
| ^~~~~
$ gcc -fsyntax-only -Wextra -Wno-unterminated-string-initialization test.c
$ gcc -fsyntax-only -Wno-unterminated-string-initialization -Wextra test.c
Move -Wextra up right below -Wall in Makefile.extrawarn to ensure these
flags are at the beginning of the warning options list. Move the couple
of warning options that have been added to the main Makefile since
commit e88ca24319e4 ("kbuild: consolidate warning flags in
scripts/Makefile.extrawarn") to scripts/Makefile.extrawarn after -Wall /
-Wextra to ensure they get properly disabled for all compilers.
Fixes: 9d7a0577c9db ("gcc-15: disable '-Wunterminated-string-initialization' entirely for now")
Link: https://github.com/llvm/llvm-project/issues/10359
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix potential inode leak in iget() after memory allocation failure
- in subpage mode, fix extent buffer bitmap iteration when writing out
dirty sectors
- fix range calculation when falling back to COW for a NOCOW file
* tag 'for-6.15-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: adjust subpage bit start based on sectorsize
btrfs: fix the inode leak in btrfs_iget()
btrfs: fix COW handling in run_delalloc_nocow()
|
|
- Don't call bch2_trans_relock() after dir_emit(); taking a transaction
restart here will cause us to emit the same dirent to userspace twice
- Fix incorrect checking of the return value on dir_emit(): "true" means
success, keep going, but bch2_dir_emit() needs to return true when
we're finished iterating.
https://github.com/koverstreet/bcachefs/issues/867
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull modules fixes from Petr Pavlu:
"A single series to properly handle the module_kobject creation.
This fixes a problem with missing /sys/module/<module>/drivers for
built-in modules"
* tag 'modules-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
drivers: base: handle module_kobject creation
kernel: globalize lookup_or_create_module_kobject()
kernel: refactor lookup_or_create_module_kobject()
kernel: param: rename locate_module_kobject
|
|
syzbot complains about the cached sq head read, and it's totally right.
But we don't need to care, it's just reading fdinfo, and reading the
CQ or SQ tail/head entries are known racy in that they are just a view
into that very instant and may of course be outdated by the time they
are reported.
Annotate both the SQ head and CQ tail read with data_race() to avoid
this syzbot complaint.
Link: https://lore.kernel.org/io-uring/6811f6dc.050a0220.39e3a1.0d0e.GAE@google.com/
Reported-by: syzbot+3e77fd302e99f5af9394@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Michael Chan says:
====================
bnxt_en: Misc. bug fixes
This series fixes a bug in the driver initialization path, MSIX
setup sequencing issue in the FW error and AER paths, a missing
skb_mark_for_recycle() in the VLAN error path, some ethtool coredump
fixes, an ethtool selftest fix, and an ethtool register dump byte order
fix.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For version 1 register dump that includes the PCIe stats, the existing
code incorrectly assumes that all PCIe stats are 64-bit values. Fix it
by using an array containing the starting and ending index of the 32-bit
values. The loop in bnxt_get_regs() will use the array to do proper
endian swap for the 32-bit values.
Fixes: b5d600b027eb ("bnxt_en: Add support for 'ethtool -d'")
Reviewed-by: Shruti Parab <shruti.parab@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When retrieving the FW coredump using ethtool, it can sometimes cause
memory corruption:
BUG: KFENCE: memory corruption in __bnxt_get_coredump+0x3ef/0x670 [bnxt_en]
Corrupted memory at 0x000000008f0f30e8 [ ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ] (in kfence-#45):
__bnxt_get_coredump+0x3ef/0x670 [bnxt_en]
ethtool_get_dump_data+0xdc/0x1a0
__dev_ethtool+0xa1e/0x1af0
dev_ethtool+0xa8/0x170
dev_ioctl+0x1b5/0x580
sock_do_ioctl+0xab/0xf0
sock_ioctl+0x1ce/0x2e0
__x64_sys_ioctl+0x87/0xc0
do_syscall_64+0x5c/0xf0
entry_SYSCALL_64_after_hwframe+0x78/0x80
...
This happens when copying the coredump segment list in
bnxt_hwrm_dbg_dma_data() with the HWRM_DBG_COREDUMP_LIST FW command.
The info->dest_buf buffer is allocated based on the number of coredump
segments returned by the FW. The segment list is then DMA'ed by
the FW and the length of the DMA is returned by FW. The driver then
copies this DMA'ed segment list to info->dest_buf.
In some cases, this DMA length may exceed the info->dest_buf length
and cause the above BUG condition. Fix it by capping the copy
length to not exceed the length of info->dest_buf. The extra
DMA data contains no useful information.
This code path is shared for the HWRM_DBG_COREDUMP_LIST and the
HWRM_DBG_COREDUMP_RETRIEVE FW commands. The buffering is different
for these 2 FW commands. To simplify the logic, we need to move
the line to adjust the buffer length for HWRM_DBG_COREDUMP_RETRIEVE
up, so that the new check to cap the copy length will work for both
commands.
Fixes: c74751f4c392 ("bnxt_en: Return error if FW returns more data than dump length")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Shruti Parab <shruti.parab@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When handling HWRM_DBG_COREDUMP_LIST FW command in
bnxt_hwrm_dbg_dma_data(), the allocated buffer info->dest_buf is
not freed in the error path. In the normal path, info->dest_buf
is assigned to coredump->data and it will eventually be freed after
the coredump is collected.
Free info->dest_buf immediately inside bnxt_hwrm_dbg_dma_data() in
the error path.
Fixes: c74751f4c392 ("bnxt_en: Return error if FW returns more data than dump length")
Reported-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Shruti Parab <shruti.parab@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is similar to the last patch to delay the
pci_alloc_irq_vectors() call in the AER path until after calling
bnxt_reserve_rings(). bnxt_reserve_rings() needs to properly map
the MSIX table first before we call pci_alloc_irq_vectors() which
may immediately write to the MSIX table in some architectures.
Move the bnxt_init_int_mode() call from bnxt_io_slot_reset() to
bnxt_io_resume() after calling bnxt_reserve_rings().
With this change, the AER path may call bnxt_open() ->
bnxt_hwrm_if_change() with bp->irq_tbl set to NULL. bp->irq_tbl is
cleared when we call bnxt_clear_int_mode() in bnxt_io_slot_reset().
So we cannot use !bp->irq_tbl to detect aborted FW reset. Add a
new BNXT_FW_RESET_STATE_ABORT to detect aborted FW reset in
bnxt_hwrm_if_change().
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On some architectures (e.g. ARM), calling pci_alloc_irq_vectors()
will immediately cause the MSIX table to be written. This will not
work if we haven't called bnxt_reserve_rings() to properly map
the MSIX table to the MSIX vectors reserved by FW.
Fix the FW error recovery path to delay the bnxt_init_int_mode() ->
pci_alloc_irq_vectors() call by removing it from bnxt_hwrm_if_change().
bnxt_request_irq() later in the code path will call it and by then the
MSIX table is properly mapped.
Fixes: 4343838ca5eb ("bnxt_en: Replace deprecated PCI MSIX APIs")
Suggested-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If bnxt_rx_vlan() fails because the VLAN protocol ID is invalid,
the SKB is freed but we're missing the call to recycle it. This
may cause the warning:
"page_pool_release_retry() stalled pool shutdown"
Add the missing skb_mark_for_recycle() in bnxt_rx_vlan().
Fixes: 86b05508f775 ("bnxt_en: Use the unified RX page pool buffers for XDP and non-XDP")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When RDMA driver is loaded, running offline self test is not
supported and driver returns failure early. But it is not clearing
the input buffer and hence the application prints some junk
characters for individual test results.
Fix it by clearing the buffer before returning.
Fixes: 895621f1c816 ("bnxt_en: Don't support offline self test when RoCE driver is loaded")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
WARN_ON() is triggered in __flush_work() if bnxt_init_chip() fails
because we call cancel_work_sync() on dim work that has not been
initialized.
WARNING: CPU: 37 PID: 5223 at kernel/workqueue.c:4201 __flush_work.isra.0+0x212/0x230
The driver relies on the BNXT_STATE_NAPI_DISABLED bit to check if dim
work has already been cancelled. But in the bnxt_open() path,
BNXT_STATE_NAPI_DISABLED is not set and this causes the error
path to think that it needs to cancel the uninitalized dim work.
Fix it by setting BNXT_STATE_NAPI_DISABLED during initialization.
The bit will be cleared when we enable NAPI and initialize dim work.
Fixes: 40452969a506 ("bnxt_en: Fix DIM shutdown")
Suggested-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Shravya KN <shravya.k-n@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This fixes a regression in scompress"
* tag 'v6.15-p6' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: scompress - increment scomp_scratch_users when already allocated
|
|
If any address or port is changed, update it in all packets and recalculate
checksum.
Fixes: 9fd1ff5d2ac7 ("udp: Support UDP fraglist GRO/GSO.")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250426153210.14044-1-nbd@nbd.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Vladimir Oltean says:
====================
Fix Felix DSA taprio gates after clock jump
Richie Pearn presented a reproducible situation where traffic would get
blocked on the NXP LS1028A switch if a certain taprio schedule was
applied, and stepping the PTP clock would take place. The latter event
is an expected initial occurrence, but also at runtime, for example when
transitioning from one grandmaster to another.
The issue is completely described in patch 1/4, which also contains
the fix, but it has left me with some doubts regarding the need for
vsc9959_tas_clock_adjust() in general.
In order to prove to myself that vsc9959_tas_clock_adjust() is needed in
general, I have written a selftest for the tc-taprio data path in patch
4/4. On the LS1028A, we can clearly see the following failures without
that function:
INFO: Forcing a backward clock jump
TEST: ping [FAIL]
INFO: Setting up taprio after PTP
TEST: In band with gate [FAIL]
Reception of 100 packets failed
TEST: Out of band with gate [FAIL]
Reception of 100 packets failed
As for testing my fix from patch 1/4, that was quite a bit more complex
to do automatically. In fact, I couldn't find any other schedule that
would fail to be updated by vsc9959_tas_clock_adjust() as cleanly as
the schedule from Richie, so I've added that specific schedule as the
test_clock_jump_backward() test.
The test ordering is also (unfortunately) very strategic. Running the
selftest to the end dirties the GCL RAM, and when running
test_clock_jump_backward() once again, the GCL entries won't be all
zeroes as they were the first time around. They will contain bits and
pieces of old schedules, making it very challenging to make it fail.
Thus, test_clock_jump_backward() is the first in the test suite, and
without patch 1/4, it is only supposed to fail the _first_ time when
running after a clean boot.
====================
Link: https://patch.msgid.link/20250426144859.3128352-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a forwarding path test for tc-taprio, based on isochron. This is
specifically intended for NICs with an offloaded data path (switchdev/DSA)
and requires taprio 'flags 2'. Also, $h1 and $h2 must support hardware
timestamping, and $h1 tc-etf offload, for isochron to work.
Packets received by a switch while the egress port has a taprio schedule
with an open gate for the traffic class must be sent right away.
Packets received by the switch while the traffic class gate must be
delayed until it opens.
Packets received by the switch must be dropped if the gate for the
traffic class never opens.
Packets should pass if the maximum SDU for the traffic class allows it,
and should be dropped otherwise.
The schedule should auto-update itself if clock jumps take place while
taprio is installed. Repeat most of the above tests after forcing two
clock jumps, one backwards (in Jan 1970) and one back into the present.
Symlink it from tools/testing/selftests/drivers/net/dsa, because usually
DSA ports have the same MAC address, and we need STABLE_MAC_ADDRS=yes
from its forwarding.config for the test to run successfully.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250426144859.3128352-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make out-of-band testing (send a packet when its traffic class gate is
closed, expecting it to be delayed) more predictable by allowing the
window size to be customized by isochron_do().
From man isochron-send, the window size alters the advance time (the
delta between the transmission time of the packet, and its expected TX
time when using SO_TXTIME or tc-taprio on the sender). In absence of the
argument, isochron-send defaults to maximizing the advance time (making
it equal to the cycle length).
The default behavior is exactly what is problematic. An advance time
that is too large will make packets intended to be out-of-band still be
potentially in-band with an open gate from the schedule's previous cycle.
We need to allow that advance time to be reduced.
Perhaps a bit confusingly, isochron_do() has a shift_time argument
currently, but that does not help here. The shift time shifts both the
user space wakeup time and the expected TX time by equal amounts, it is
unable of bringing them closer to one another.
Set the window size properly for the Ocelot PSFP selftest as well.
That used to work due to a very carefully chosen SHIFT_TIME_NS.
I've re-tested that the test still works properly.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250426144859.3128352-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This snippet will be necessary for a future isochron-based test, so
provide a simpler high-level interface for counting the received
packets.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250426144859.3128352-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
