| Age | Commit message (Collapse) | Author |
|---|
|
of_node_put(priv->ds->slave_mii_bus->dev.of_node) should be
done before mdiobus_free(priv->ds->slave_mii_bus).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: 0d120dfb5d67 ("net: dsa: lantiq_gswip: don't use devres for mdiobus")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/1644921768-26477-1-git-send-email-khoroshilov@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ipv6 flowlabels historically require a reservation before use.
Optionally in exclusive mode (e.g., user-private).
Commit 59c820b2317f ("ipv6: elide flowlabel check if no exclusive
leases exist") introduced a fastpath that avoids this check when no
exclusive leases exist in the system, and thus any flowlabel use
will be granted.
That allows skipping the control operation to reserve a flowlabel
entirely. Though with a warning if the fast path fails:
This is an optimization. Robust applications still have to revert to
requesting leases if the fast path fails due to an exclusive lease.
Still, this is subtle. Better isolate network namespaces from each
other. Flowlabels are per-netns. Also record per-netns whether
exclusive leases are in use. Then behavior does not change based on
activity in other netns.
Changes
v2
- wrap in IS_ENABLED(CONFIG_IPV6) to avoid breakage if disabled
Fixes: 59c820b2317f ("ipv6: elide flowlabel check if no exclusive leases exist")
Link: https://lore.kernel.org/netdev/MWHPR2201MB1072BCCCFCE779E4094837ACD0329@MWHPR2201MB1072.namprd22.prod.outlook.com/
Reported-by: Congyu Liu <liu3101@purdue.edu>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Tested-by: Congyu Liu <liu3101@purdue.edu>
Link: https://lore.kernel.org/r/20220215160037.1976072-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
disabled
Whenever bridge driver hits the max capacity of MDBs, it disables
the MC processing (by setting corresponding bridge option), but never
notifies switchdev about such change (the notifiers are called only upon
explicit setting of this option, through the registered netlink interface).
This could lead to situation when Software MDB processing gets disabled,
but this event never gets offloaded to the underlying Hardware.
Fix this by adding a notify message in such case.
Fixes: 147c1e9b902c ("switchdev: bridge: Offload multicast disabled")
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20220215165303.31908-1-oleksandr.mazur@plvision.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When mounting with SMB2.1 or earlier, even with nomultichannel, we
log the confusing warning message:
"CIFS: VFS: multichannel is not supported on this protocol version, use 3.0 or above"
Fix this so that we don't log this unless they really are trying
to mount with multichannel.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215608
Reported-by: Kim Scarborough <kim@scarborough.kim>
Cc: stable@vger.kernel.org # 5.11+
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Sysfs support might be disabled so we need to guard the code that
instantiates "compression" attribute with an #ifdef.
Fixes: b1ae6dc41eaa ("module: add in-kernel support for decompressing")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
The result of the writeback, whether it is an ENOSPC or an EIO, or
anything else, does not inhibit the NFS client from reporting the
correct file timestamps.
Fixes: 79566ef018f5 ("NFS: Getattr doesn't require data sync semantics")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fix from Ulf Hansson:
"Fix recovery logic for multi block I/O reads (MMC_READ_MULTIPLE_BLOCK)"
* tag 'mmc-v5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: block: fix read single on recovery logic
|
|
Daniel Gibson reports that the n_tty code gets line termination wrong in
very specific cases:
"If you feed a line with exactly 64 chars + terminating newline, and
directly afterwards (without reading) another line into a pseudo
terminal, the the first read() on the other side will return the 64
char line *without* terminating newline, and the next read() will
return the missing terminating newline AND the complete next line (if
it fits in the buffer)"
and bisected the behavior to commit 3b830a9c34d5 ("tty: convert
tty_ldisc_ops 'read()' function to take a kernel pointer").
Now, digging deeper, it turns out that the behavior isn't exactly new:
what changed in commit 3b830a9c34d5 was that the tty line discipline
.read() function is now passed an intermediate kernel buffer rather than
the final user space buffer.
And that intermediate kernel buffer is 64 bytes in size - thus that
special case with exactly 64 bytes plus terminating newline.
The same problem did exist before, but historically the boundary was not
the 64-byte chunk, but the user-supplied buffer size, which is obviously
generally bigger (and potentially bigger than N_TTY_BUF_SIZE, which
would hide the issue entirely).
The reason is that the n_tty canon_copy_from_read_buf() code would look
ahead for the EOL character one byte further than it would actually
copy. It would then decide that it had found the terminator, and unmark
it as an EOL character - which in turn explains why the next read
wouldn't then be terminated by it.
Now, the reason it did all this in the first place is related to some
historical and pretty obscure EOF behavior, see commit ac8f3bf8832a
("n_tty: Fix poll() after buffer-limited eof push read") and commit
40d5e0905a03 ("n_tty: Fix EOF push handling").
And the reason for the EOL confusion is that we treat EOF as a special
EOL condition, with the EOL character being NUL (aka "__DISABLED_CHAR"
in the kernel sources).
So that EOF look-ahead also affects the normal EOL handling.
This patch just removes the look-ahead that causes problems, because EOL
is much more critical than the historical "EOF in the middle of a line
that coincides with the end of the buffer" handling ever was.
Now, it is possible that we should indeed re-introduce the "look at next
character to see if it's a EOF" behavior, but if so, that should be done
not at the kernel buffer chunk boundary in canon_copy_from_read_buf(),
but at a higher level, when we run out of the user buffer.
In particular, the place to do that would be at the top of
'n_tty_read()', where we check if it's a continuation of a previously
started read, and there is no more buffer space left, we could decide to
just eat the __DISABLED_CHAR at that point.
But that would be a separate patch, because I suspect nobody actually
cares, and I'd like to get a report about it before bothering.
Fixes: 3b830a9c34d5 ("tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer")
Fixes: ac8f3bf8832a ("n_tty: Fix poll() after buffer-limited eof push read")
Fixes: 40d5e0905a03 ("n_tty: Fix EOF push handling")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215611
Reported-and-tested-by: Daniel Gibson <metalcaedes@gmail.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add and ACPI idle power level limit for 32-bit ThinkPad T40.
There is a regression on T40 introduced by commit d6b88ce2, starting
with kernel 5.16:
commit d6b88ce2eb9d2698eb24451eb92c0a1649b17bb1
Author: Richard Gong <richard.gong@amd.com>
Date: Wed Sep 22 08:31:16 2021 -0500
ACPI: processor idle: Allow playing dead in C3 state
The above patch is trying to enter C3 state during init, what is causing
a T40 system freeze. I have not found a similar issue on any other of my
32-bit machines.
The fix is to add another exception to the processor_power_dmi_table[] list.
As a result the dmesg shows as expected:
[2.155398] ACPI: IBM ThinkPad T40 detected - limiting to C2 max_cstate. Override with "processor.max_cstate=9"
[2.155404] ACPI: processor limited to max C-state 2
The fix is trivial and affects only vintage T40 systems.
Fixes: d6b88ce2eb9d ("CPI: processor idle: Allow playing dead in C3 state")
Signed-off-by: Woody Suwalski <wsuwalski@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Cc: 5.16+ <stable@vger.kernel.org> # 5.16+
[ rjw: New subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The struct perf_event_attr is initialised differently in Arm64 when
recording in call-graph fp mode, so update the relevant tests, and add
two extra arm64-only tests.
Before:
$ perf test 17 -v
17: Setup struct perf_event_attr
[...]
running './tests/attr/test-record-graph-default'
expected sample_type=295, got 4391
expected sample_regs_user=0, got 1073741824
FAILED './tests/attr/test-record-graph-default' - match failure
test child finished with -1
---- end ----
After:
[...]
running './tests/attr/test-record-graph-default-aarch64'
test limitation 'aarch64'
running './tests/attr/test-record-graph-fp-aarch64'
test limitation 'aarch64'
running './tests/attr/test-record-graph-default'
test limitation '!aarch64'
excluded architecture list ['aarch64']
skipped [aarch64] './tests/attr/test-record-graph-default'
running './tests/attr/test-record-graph-fp'
test limitation '!aarch64'
excluded architecture list ['aarch64']
skipped [aarch64] './tests/attr/test-record-graph-fp'
[...]
Fixes: 7248e308a5758761 ("perf tools: Record ARM64 LR register automatically")
Signed-off-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Truong <alexandre.truong@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lore.kernel.org/lkml/20220125104435.2737-1-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
GCC 12 correctly reports a potential use-after-free condition in the
xrealloc helper. Fix the warning by avoiding an implicit "free(ptr)"
when size == 0:
In file included from help.c:12:
In function 'xrealloc',
inlined from 'add_cmdname' at help.c:24:2: subcmd-util.h:56:23: error: pointer may be used after 'realloc' [-Werror=use-after-free]
56 | ret = realloc(ptr, size);
| ^~~~~~~~~~~~~~~~~~
subcmd-util.h:52:21: note: call to 'realloc' here
52 | void *ret = realloc(ptr, size);
| ^~~~~~~~~~~~~~~~~~
subcmd-util.h:58:31: error: pointer may be used after 'realloc' [-Werror=use-after-free]
58 | ret = realloc(ptr, 1);
| ^~~~~~~~~~~~~~~
subcmd-util.h:52:21: note: call to 'realloc' here
52 | void *ret = realloc(ptr, size);
| ^~~~~~~~~~~~~~~~~~
Fixes: 2f4ce5ec1d447beb ("perf tools: Finalize subcmd independence")
Reported-by: Valdis Klētnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Kees Kook <keescook@chromium.org>
Tested-by: Valdis Klētnieks <valdis.kletnieks@vt.edu>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: linux-hardening@vger.kernel.org
Cc: Valdis Klētnieks <valdis.kletnieks@vt.edu>
Link: http://lore.kernel.org/lkml/20220213182443.4037039-1-keescook@chromium.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Tzvetomir Stoyanov reported an issue with using macro
perf_cpu_map__for_each_cpu using private perf_cpu object.
The issue is caused by recent change that wrapped cpu in struct perf_cpu
to distinguish it from cpu indexes. We need to make struct perf_cpu
public.
Add a simple test for using the perf_cpu_map__for_each_cpu macro.
Fixes: 6d18804b963b78dc ("perf cpumap: Give CPUs their own type")
Reported-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220215153713.31395-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
'perf inject' with Coresight data generates files that cannot be opened
when only the last branch option is specified:
perf inject -i perf.data --itrace=l -o inject.data
perf script -i inject.data
0x33faa8 [0x8]: failed to process type: 9 [Bad address]
This is because cs_etm__synth_instruction_sample() is called even when
the sample type for instructions hasn't been setup. Last branch records
are attached to instruction samples so it doesn't make sense to generate
them when --itrace=i isn't specified anyway.
This change disables all calls of cs_etm__synth_instruction_sample()
unless --itrace=i is specified, resulting in a file with no samples if
only --itrace=l is provided, rather than a bad file.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220210200620.1227232-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
sample_branches and sample_instructions are already saved in the
synth_opts struct. Other usages like synth_opts.last_branch don't save a
value, so make this more consistent by always going through synth_opts
and not saving duplicate values.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220210200620.1227232-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit a7f3713f6bf207e6 ("libperf tests: Add test_stat_multiplexing test")
added printf's of 64-bit ints using %lu which doesn't work on 32-bit
builds:
tests/test-evlist.c:529:29: error: format ‘%lu’ expects argument of type \
‘long unsigned int’, but argument 4 has type ‘uint64_t’ {aka ‘long long unsigned int’} [-Werror=format=]
Use PRIu64 instead which works on both 32-bit and 64-bit systems.
Fixes: a7f3713f6bf207e6 ("libperf tests: Add test_stat_multiplexing test")
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Link: https://lore.kernel.org/r/20220201213903.699656-1-robh@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the trivial change in:
ddecd22878601a60 ("perf: uapi: Document perf_event_attr::sig_data truncation on 32 bit architectures")
Just adds a comment.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h'
diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h
Cc: Marco Elver <elver@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The function trace__symbols_init() runs "perf-read-vdso32" and that ends up
with a SIGCHLD delivered to 'perf'. And this SIGCHLD make perf exit early.
'perf trace' should exit only if the SIGCHLD is from our workload process.
So let's use sigaction() instead of signal() to match such condition.
Committer notes:
Use memset to zero the 'struct sigaction' variable as the '= { 0 }'
method isn't accepted in many compiler versions, e.g.:
4 34.02 alpine:3.6 : FAIL clang version 4.0.0 (tags/RELEASE_400/final)
builtin-trace.c:4897:35: error: suggest braces around initialization of subobject [-Werror,-Wmissing-braces]
struct sigaction sigchld_act = { 0 };
^
{}
builtin-trace.c:4897:37: error: missing field 'sa_mask' initializer [-Werror,-Wmissing-field-initializers]
struct sigaction sigchld_act = { 0 };
^
2 errors generated.
6 32.60 alpine:3.8 : FAIL gcc version 6.4.0 (Alpine 6.4.0)
builtin-trace.c:4897:35: error: suggest braces around initialization of subobject [-Werror,-Wmissing-braces]
struct sigaction sigchld_act = { 0 };
^
{}
builtin-trace.c:4897:37: error: missing field 'sa_mask' initializer [-Werror,-Wmissing-field-initializers]
struct sigaction sigchld_act = { 0 };
^
2 errors generated.
7 34.82 alpine:3.9 : FAIL gcc version 8.3.0 (Alpine 8.3.0)
builtin-trace.c:4897:35: error: suggest braces around initialization of subobject [-Werror,-Wmissing-braces]
struct sigaction sigchld_act = { 0 };
^
{}
builtin-trace.c:4897:37: error: missing field 'sa_mask' initializer [-Werror,-Wmissing-field-initializers]
struct sigaction sigchld_act = { 0 };
^
2 errors generated.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220208140725.3947-1-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Make sure we don't assign an error pointer to crtc_state->mode_blob
as that will break all kinds of places that assume either NULL or a
valid pointer (eg. drm_property_blob_put()).
Cc: stable@vger.kernel.org
Reported-by: fuyufan <fuyufan@huawei.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209091928.14766-1-ville.syrjala@linux.intel.com
Acked-by: Maxime Ripard <maxime@cerno.tech>
|
|
This driver works just fine with the BT404 version of the touchscreen
as well. Tested on the Samsung GT-I8160 (Codina) mobile phone.
Add all the new variants from the binding document so people can
easily test them, we believe most of them work more or less.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220214234033.1052681-1-linus.walleij@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Read HW interrupt pending state from the HW
x86:
- Don't truncate the performance event mask on AMD
- Fix Xen runstate updates to be atomic when preempting vCPU
- Fix for AMD AVIC interrupt injection race
- Several other AMD fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/pmu: Use AMD64_RAW_EVENT_MASK for PERF_TYPE_RAW
KVM: x86/pmu: Don't truncate the PerfEvtSeln MSR when creating a perf event
KVM: SVM: fix race between interrupt delivery and AVIC inhibition
KVM: SVM: set IRR in svm_deliver_interrupt
KVM: SVM: extract avic_ring_doorbell
selftests: kvm: Remove absent target file
KVM: arm64: vgic: Read HW interrupt pending state from the HW
KVM: x86/xen: Fix runstate updates to be atomic when preempting vCPU
KVM: x86: SVM: move avic definitions from AMD's spec to svm.h
KVM: x86: lapic: don't touch irr_pending in kvm_apic_update_apicv when inhibiting it
KVM: x86: nSVM: deal with L1 hypervisor that intercepts interrupts but lets L2 control them
KVM: x86: nSVM: expose clean bit support to the guest
KVM: x86: nSVM/nVMX: set nested_run_pending on VM entry which is a result of RSM
KVM: x86: nSVM: mark vmcb01 as dirty when restoring SMM saved state
KVM: x86: nSVM: fix potential NULL derefernce on nested migration
KVM: x86: SVM: don't passthrough SMAP/SMEP/PKE bits in !NPT && !gCR0.PG case
Revert "svm: Add warning message for AVIC IPI invalid target"
|
|
Paul reports that the ACPI core complains on every boot about a missing
CEDT table. Unlike the standard NUMA tables (SRAT, MADT, and SLIT) that
are critical to NUMA init, CEDT is only expected on CXL platforms. Given
the notice is not actionable lower its severity to debug.
Link: https://lore.kernel.org/r/55f5c077-061c-7e53-b02d-53dde1dd654f@molgen.mpg.de
Fixes: fd49f99c1809 ("ACPI: NUMA: Add a node and memblk for each CFMWS not in SRAT")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- memory leak fix for hid-elo driver (Dongliang Mu)
- fix for hangs on newer AMD platforms with amd_sfh-driven hardware
(Basavaraj Natikar )
- locking fix in i2c-hid (Daniel Thompson)
- a few device-ID specific quirks
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: amd_sfh: Add interrupt handler to process interrupts
HID: amd_sfh: Add functionality to clear interrupts
HID: amd_sfh: Disable the interrupt for all command
HID: amd_sfh: Correct the structure field name
HID: amd_sfh: Handle amd_sfh work buffer in PM ops
HID:Add support for UGTABLET WP5540
HID: amd_sfh: Add illuminance mask to limit ALS max value
HID: amd_sfh: Increase sensor command timeout
HID: i2c-hid: goodix: Fix a lockdep splat
HID: elo: fix memory leak in elo_probe
HID: apple: Set the tilde quirk flag on the Wellspring 5 and later
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- yield CPU more often when defragmenting a large file
- skip defragmenting extents already under writeback
- improve error message when send fails to write file data
- get rid of warning when mounted with 'flushoncommit'
* tag 'for-5.17-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: send: in case of IO error log it
btrfs: get rid of warning on transaction commit when using flushoncommit
btrfs: defrag: don't try to defrag extents which are under writeback
btrfs: don't hold CPU for too long when defragging a file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- Fix miscompilations when function calls are made from inside a
put_user() call
- Drop __init from map_pages() declaration to avoid random boot crashes
- Added #error messages if a 64-bit compiler was used to build a 32-bit
kernel (and vice versa)
- Fix out-of-bound data TLB miss faults in sba_iommu and ccio-dma
drivers
- Add ioread64_lo_hi() and iowrite64_lo_hi() functions to avoid kernel
test robot errors
- Fix link failure when 8250_gsc driver is built without CONFIG_IOSAPIC
* tag 'for-5.17/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
serial: parisc: GSC: fix build when IOSAPIC is not set
parisc: Fix some apparent put_user() failures
parisc: Show error if wrong 32/64-bit compiler is being used
parisc: Add ioread64_lo_hi() and iowrite64_lo_hi()
parisc: Fix sglist access in ccio-dma.c
parisc: Fix data TLB miss in sba_unmap_sg
parisc: Drop __init from map_pages declaration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Rework use of DMA_BIT_MASK in vmbus to work around a clang bug
(Michael Kelley)
- Fix NUMA topology (Long Li)
- Fix a memory leak in vmbus (Miaoqian Lin)
- One minor clean-up patch (Cai Huoqing)
* tag 'hyperv-fixes-signed-20220215' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: utils: Make use of the helper macro LIST_HEAD()
Drivers: hv: vmbus: Rework use of DMA_BIT_MASK(64)
Drivers: hv: vmbus: Fix memory leak in vmbus_add_channel_kobj
PCI: hv: Fix NUMA node assignment when kernel boots with custom NUMA topology
|
|
A broken device may give an extreme offset like 0xFFF0
and a reasonable length for a fragment. In the sanity
check as formulated now, this will create an integer
overflow, defeating the sanity check. Both offset
and offset + len need to be checked in such a manner
that no overflow can occur.
And those quantities should be unsigned.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Do alignment logic properly and use the "ptr" local variable for
calculating the remainder of the alignment.
This became an issue because struct edac_mc_layer has a size that is not
zero modulo eight, and the next offset that was prepared for the private
data was unaligned, causing an alignment exception.
The patch in Fixes: which broke this actually wanted to "what we
actually care about is the alignment of the actual pointer that's about
to be returned." But it didn't check that alignment.
Use the correct variable "ptr" for that.
[ bp: Massage commit message. ]
Fixes: 8447c4d15e35 ("edac: Do alignment logic properly in edac_align_ptr()")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220113100622.12783-2-farbere@amazon.com
|
|
Clang static analysis reports this problem
route.c:425:4: warning: Use of memory after it is freed
trace_mctp_key_acquire(key);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
When mctp_key_add() fails, key is freed but then is later
used in trace_mctp_key_acquire(). Add an else statement
to use the key only when mctp_key_add() is successful.
Fixes: 4f9e1ba6de45 ("mctp: Add tracepoints for tag/key handling")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Looping ~65535 times doing kmalloc() calls can trigger soft lockups,
especially with DEBUG features (like KASAN).
[ 253.536212] watchdog: BUG: soft lockup - CPU#64 stuck for 26s! [b219417889:12575]
[ 253.544433] Modules linked in: vfat fat i2c_mux_pca954x i2c_mux spidev cdc_acm xhci_pci xhci_hcd sha3_generic gq(O)
[ 253.544451] CPU: 64 PID: 12575 Comm: b219417889 Tainted: G S O 5.17.0-smp-DEV #801
[ 253.544457] RIP: 0010:kernel_text_address (./include/asm-generic/sections.h:192 ./include/linux/kallsyms.h:29 kernel/extable.c:67 kernel/extable.c:98)
[ 253.544464] Code: 0f 93 c0 48 c7 c1 e0 63 d7 a4 48 39 cb 0f 92 c1 20 c1 0f b6 c1 5b 5d c3 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 53 48 89 fb <48> c7 c0 00 00 80 a0 41 be 01 00 00 00 48 39 c7 72 0c 48 c7 c0 40
[ 253.544468] RSP: 0018:ffff8882d8baf4c0 EFLAGS: 00000246
[ 253.544471] RAX: 1ffff1105b175e00 RBX: ffffffffa13ef09a RCX: 00000000a13ef001
[ 253.544474] RDX: ffffffffa13ef09a RSI: ffff8882d8baf558 RDI: ffffffffa13ef09a
[ 253.544476] RBP: ffff8882d8baf4d8 R08: ffff8882d8baf5e0 R09: 0000000000000004
[ 253.544479] R10: ffff8882d8baf5e8 R11: ffffffffa0d59a50 R12: ffff8882eab20380
[ 253.544481] R13: ffffffffa0d59a50 R14: dffffc0000000000 R15: 1ffff1105b175eb0
[ 253.544483] FS: 00000000016d3380(0000) GS:ffff88af48c00000(0000) knlGS:0000000000000000
[ 253.544486] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 253.544488] CR2: 00000000004af0f0 CR3: 00000002eabfa004 CR4: 00000000003706e0
[ 253.544491] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 253.544492] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 253.544494] Call Trace:
[ 253.544496] <TASK>
[ 253.544498] ? io_queue_sqe (fs/io_uring.c:7143)
[ 253.544505] __kernel_text_address (kernel/extable.c:78)
[ 253.544508] unwind_get_return_address (arch/x86/kernel/unwind_frame.c:19)
[ 253.544514] arch_stack_walk (arch/x86/kernel/stacktrace.c:27)
[ 253.544517] ? io_queue_sqe (fs/io_uring.c:7143)
[ 253.544521] stack_trace_save (kernel/stacktrace.c:123)
[ 253.544527] ____kasan_kmalloc (mm/kasan/common.c:39 mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:515)
[ 253.544531] ? ____kasan_kmalloc (mm/kasan/common.c:39 mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:515)
[ 253.544533] ? __kasan_kmalloc (mm/kasan/common.c:524)
[ 253.544535] ? kmem_cache_alloc_trace (./include/linux/kasan.h:270 mm/slab.c:3567)
[ 253.544541] ? io_issue_sqe (fs/io_uring.c:4556 fs/io_uring.c:4589 fs/io_uring.c:6828)
[ 253.544544] ? __io_queue_sqe (fs/io_uring.c:?)
[ 253.544551] __kasan_kmalloc (mm/kasan/common.c:524)
[ 253.544553] kmem_cache_alloc_trace (./include/linux/kasan.h:270 mm/slab.c:3567)
[ 253.544556] ? io_issue_sqe (fs/io_uring.c:4556 fs/io_uring.c:4589 fs/io_uring.c:6828)
[ 253.544560] io_issue_sqe (fs/io_uring.c:4556 fs/io_uring.c:4589 fs/io_uring.c:6828)
[ 253.544564] ? __kasan_slab_alloc (mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469)
[ 253.544567] ? __kasan_slab_alloc (mm/kasan/common.c:39 mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469)
[ 253.544569] ? kmem_cache_alloc_bulk (mm/slab.h:732 mm/slab.c:3546)
[ 253.544573] ? __io_alloc_req_refill (fs/io_uring.c:2078)
[ 253.544578] ? io_submit_sqes (fs/io_uring.c:7441)
[ 253.544581] ? __se_sys_io_uring_enter (fs/io_uring.c:10154 fs/io_uring.c:10096)
[ 253.544584] ? __x64_sys_io_uring_enter (fs/io_uring.c:10096)
[ 253.544587] ? do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
[ 253.544590] ? entry_SYSCALL_64_after_hwframe (??:?)
[ 253.544596] __io_queue_sqe (fs/io_uring.c:?)
[ 253.544600] io_queue_sqe (fs/io_uring.c:7143)
[ 253.544603] io_submit_sqe (fs/io_uring.c:?)
[ 253.544608] io_submit_sqes (fs/io_uring.c:?)
[ 253.544612] __se_sys_io_uring_enter (fs/io_uring.c:10154 fs/io_uring.c:10096)
[ 253.544616] __x64_sys_io_uring_enter (fs/io_uring.c:10096)
[ 253.544619] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
[ 253.544623] entry_SYSCALL_64_after_hwframe (??:?)
Fixes: ddf0322db79c ("io_uring: add IORING_OP_PROVIDE_BUFFERS")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: io-uring <io-uring@vger.kernel.org>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220215041003.2394784-1-eric.dumazet@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ocelot_vlan_member_del() will free the struct ocelot_bridge_vlan, so if
this is the same as the port's pvid_vlan which we access afterwards,
what we're accessing is freed memory.
Fix the bug by determining whether to clear ocelot_port->pvid_vlan prior
to calling ocelot_vlan_member_del().
Fixes: d4004422f6f9 ("net: mscc: ocelot: track the port pvid using a pointer")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot reported that two threads might write over agg_select_timer
at the same time. Make agg_select_timer atomic to fix the races.
BUG: KCSAN: data-race in bond_3ad_initiate_agg_selection / bond_3ad_state_machine_handler
read to 0xffff8881242aea90 of 4 bytes by task 1846 on cpu 1:
bond_3ad_state_machine_handler+0x99/0x2810 drivers/net/bonding/bond_3ad.c:2317
process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
worker_thread+0x616/0xa70 kernel/workqueue.c:2454
kthread+0x1bf/0x1e0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30
write to 0xffff8881242aea90 of 4 bytes by task 25910 on cpu 0:
bond_3ad_initiate_agg_selection+0x18/0x30 drivers/net/bonding/bond_3ad.c:1998
bond_open+0x658/0x6f0 drivers/net/bonding/bond_main.c:3967
__dev_open+0x274/0x3a0 net/core/dev.c:1407
dev_open+0x54/0x190 net/core/dev.c:1443
bond_enslave+0xcef/0x3000 drivers/net/bonding/bond_main.c:1937
do_set_master net/core/rtnetlink.c:2532 [inline]
do_setlink+0x94f/0x2500 net/core/rtnetlink.c:2736
__rtnl_newlink net/core/rtnetlink.c:3414 [inline]
rtnl_newlink+0xfeb/0x13e0 net/core/rtnetlink.c:3529
rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5594
netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494
rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343
netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg net/socket.c:725 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2413
___sys_sendmsg net/socket.c:2467 [inline]
__sys_sendmsg+0x195/0x230 net/socket.c:2496
__do_sys_sendmsg net/socket.c:2505 [inline]
__se_sys_sendmsg net/socket.c:2503 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2503
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x00000050 -> 0x0000004f
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 25910 Comm: syz-executor.1 Tainted: G W 5.17.0-rc4-syzkaller-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
1588 Single Step Timestamping code path uses a mutex to
enforce atomicity for two events:
- update of ptp single step register
- transmit ptp event packet
Before this patch the mutex was not initialized. This
caused unexpected crashes in the Tx function.
Fixes: c55211892f463 ("dpaa2-eth: support PTP Sync packet one-step timestamping")
Signed-off-by: Radu Bulie <radu-andrei.bulie@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Clang static analysis reports this representative problem
dpaa2-switch-flower.c:616:24: warning: The right operand of '=='
is a garbage value
tmp->cfg.vlan_id == vlan) {
^ ~~~~
vlan is set in dpaa2_switch_flower_parse_mirror_key(). However
this function can return success without setting vlan. So
change the default return to -EOPNOTSUPP.
Fixes: 0f3faece5808 ("dpaa2-switch: add VLAN based mirroring")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When multiple containers are running in the environment and multiple
macvlan network port are configured in each container, a lot of martian
source prints will appear after martian_log is enabled. they are almost
the same, and printed by net_warn_ratelimited. Each arp message will
trigger this print on each network port.
Such as:
IPv4: martian source 173.254.95.16 from 173.254.100.109,
on dev eth0
ll header: 00000000: ff ff ff ff ff ff 40 00 ad fe 64 6d
08 06 ......@...dm..
IPv4: martian source 173.254.95.16 from 173.254.100.109,
on dev eth1
ll header: 00000000: ff ff ff ff ff ff 40 00 ad fe 64 6d
08 06 ......@...dm..
There is no description of this kind of source in the RFC1812.
Signed-off-by: Zhang Yunkai <zhang.yunkai@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
alg_memory_allocated does not seem to be really used.
alg_proto does have a .memory_allocated field, but no
corresponding .sysctl_mem.
This means sk_has_account() returns true, but all sk_prot_mem_limits()
users will trigger a NULL dereference [1].
THis was not a problem until SO_RESERVE_MEM addition.
general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 1 PID: 3591 Comm: syz-executor153 Not tainted 5.17.0-rc3-syzkaller-00316-gb81b1829e7e3 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:sk_prot_mem_limits include/net/sock.h:1523 [inline]
RIP: 0010:sock_reserve_memory+0x1d7/0x330 net/core/sock.c:1000
Code: 08 00 74 08 48 89 ef e8 27 20 bb f9 4c 03 7c 24 10 48 8b 6d 00 48 83 c5 08 48 89 e8 48 c1 e8 03 48 b9 00 00 00 00 00 fc ff df <80> 3c 08 00 74 08 48 89 ef e8 fb 1f bb f9 48 8b 6d 00 4c 89 ff 48
RSP: 0018:ffffc90001f1fb68 EFLAGS: 00010202
RAX: 0000000000000001 RBX: ffff88814aabc000 RCX: dffffc0000000000
RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffff90e18120
RBP: 0000000000000008 R08: dffffc0000000000 R09: fffffbfff21c3025
R10: fffffbfff21c3025 R11: 0000000000000000 R12: ffffffff8d109840
R13: 0000000000001002 R14: 0000000000000001 R15: 0000000000000001
FS: 0000555556e08300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc74416f130 CR3: 0000000073d9e000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
sock_setsockopt+0x14a9/0x3a30 net/core/sock.c:1446
__sys_setsockopt+0x5af/0x980 net/socket.c:2176
__do_sys_setsockopt net/socket.c:2191 [inline]
__se_sys_setsockopt net/socket.c:2188 [inline]
__x64_sys_setsockopt+0xb1/0xc0 net/socket.c:2188
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fc7440fddc9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffe98f07968 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc7440fddc9
RDX: 0000000000000049 RSI: 0000000000000001 RDI: 0000000000000004
RBP: 0000000000000000 R08: 0000000000000004 R09: 00007ffe98f07990
R10: 0000000020000000 R11: 0000000000000246 R12: 00007ffe98f0798c
R13: 00007ffe98f079a0 R14: 00007ffe98f079e0 R15: 0000000000000000
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:sk_prot_mem_limits include/net/sock.h:1523 [inline]
RIP: 0010:sock_reserve_memory+0x1d7/0x330 net/core/sock.c:1000
Code: 08 00 74 08 48 89 ef e8 27 20 bb f9 4c 03 7c 24 10 48 8b 6d 00 48 83 c5 08 48 89 e8 48 c1 e8 03 48 b9 00 00 00 00 00 fc ff df <80> 3c 08 00 74 08 48 89 ef e8 fb 1f bb f9 48 8b 6d 00 4c 89 ff 48
RSP: 0018:ffffc90001f1fb68 EFLAGS: 00010202
RAX: 0000000000000001 RBX: ffff88814aabc000 RCX: dffffc0000000000
RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffff90e18120
RBP: 0000000000000008 R08: dffffc0000000000 R09: fffffbfff21c3025
R10: fffffbfff21c3025 R11: 0000000000000000 R12: ffffffff8d109840
R13: 0000000000001002 R14: 0000000000000001 R15: 0000000000000001
FS: 0000555556e08300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc74416f130 CR3: 0000000073d9e000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
Fixes: 2bb2f5fb21b0 ("net: add new socket option SO_RESERVE_MEM")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan
Stefan Schmidt says:
====================
Only a single fix this time.
Miquel Raynal fixed the lifs/sifs periods in the ca82010 to take the actual
symbol duration time into account.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function mt7531_phy_mode_supported in the DSA driver set supported
mode to PHY_INTERFACE_MODE_GMII instead of PHY_INTERFACE_MODE_INTERNAL
for the internal PHY, so this check breaks the PHY initialization:
mt7530 mdio-bus:00 wan (uninitialized): failed to connect to PHY: -EINVAL
Remove the check to make it work again.
Reported-by: Hauke Mehrtens <hauke@hauke-m.de>
Fixes: e40d2cca0189 ("net: phy: add MediaTek Gigabit Ethernet PHY driver")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Tested-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian
2.37.90.20220207) the following build error shows up:
{standard input}: Assembler messages:
{standard input}:2088: Error: unrecognized opcode: `ptesync'
make[3]: *** [/builds/linux/scripts/Makefile.build:287: arch/powerpc/lib/sstep.o] Error 1
Add the 'ifdef CONFIG_PPC64' around the 'ptesync' in function
'emulate_update_regs()' to like it is in 'analyse_instr()'. Since it looks like
it got dropped inadvertently by commit 3cdfcbfd32b9 ("powerpc: Change
analyse_instr so it doesn't modify *regs").
A key detail is that analyse_instr() will never recognise lwsync or
ptesync on 32-bit (because of the existing ifdef), and as a result
emulate_update_regs() should never be called with an op specifying
either of those on 32-bit. So removing them from emulate_update_regs()
should be a nop in terms of runtime behaviour.
Fixes: 3cdfcbfd32b9 ("powerpc: Change analyse_instr so it doesn't modify *regs")
Cc: stable@vger.kernel.org # v4.14+
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
[mpe: Add last paragraph of change log mentioning analyse_instr() details]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220211005113.1361436-1-anders.roxell@linaro.org
|
|
Driver builds fine with COMPILE_TEST. Enable it for wider test coverage
and easier maintenance.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Driver builds fine with COMPILE_TEST. Enable it for wider test coverage
and easier maintenance.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
|
|
Driver builds fine with COMPILE_TEST. Enable it for wider test coverage
and easier maintenance.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
|
|
pm_runtime_get_() increments the runtime PM usage counter even
when it returns an error code, thus a matching decrement is needed on
the error handling path to keep the counter balanced.
Signed-off-by: Yongzhi Liu <lyz_cs@pku.edu.cn>
Link: https://lore.kernel.org/r/1642311296-87020-1-git-send-email-lyz_cs@pku.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
As the possible failure of the dma_set_max_seg_size(), it should be
better to check the return value of the dma_set_max_seg_size().
Fixes: 97d49c59e219 ("dmaengine: rcar-dmac: set scatter/gather max segment size")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220111011239.452837-1-jiasheng@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The pm_runtime_enable will increase power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable().
Fixes: 4f3ceca254e0 ("dmaengine: stm32-dmamux: Add PM Runtime support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20220108085336.11992-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Because of the possible failure of the dma_supported(), the
dma_set_mask_and_coherent() may return error num.
Therefore, it should be better to check it and return the error if
fails.
Fixes: dc312349e875 ("dmaengine: rcar-dmac: Widen DMA mask to 40 bits")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220106030939.2644320-1-jiasheng@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add the missing unlock before return from at_xdmac_tasklet().
Fixes: e77e561925df ("dmaengine: at_xdmac: Fix race over irq_status")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20220107024047.1051915-1-yangyingliang@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
When a link comes up we add its presence to the name table to make it
possible for users to subscribe for link up/down events. However, after
a previous call signature change the binding is wrongly published with
the peer node as publishing node, instead of the own node as it should
be. This has the effect that the command 'tipc name table show' will
list the link binding (service type 2) with node scope and a peer node
as originator, something that obviously is impossible.
We correct this bug here.
Fixes: 50a3499ab853 ("tipc: simplify signature of tipc_namtbl_publish()")
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Link: https://lore.kernel.org/r/20220214013852.2803940-1-jmaloy@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In order to free resources correctly in the error handling path of
pt_core_init(), 2 goto's have to be switched. Otherwise, some resources
will leak and we will try to release things that have not been allocated
yet.
Also move a dev_err() to a place where it is more meaningful.
Fixes: fa5d823b16a9 ("dmaengine: ptdma: Initial driver for the AMD PTDMA")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Sanjay R Mehta <sanju.mehta@amd.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/41a963a35173f89c874f5c44df5530dc09fea8da.1644044244.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Before calling blk_mq_map_queues(), the mq_map and nr_queues belonging to
struct blk_mq_queue_map must have a valid value.
If nr_queues is set to 0, the system may encounter a divide by zero
depending on the type of architecture.
blk_mq_map_queues() -> queue_index()
Link: https://lore.kernel.org/r/1891546521.01644873481638.JavaMail.epsvc@epcpadp4
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jinyoung Choi <j-young.choi@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When connected point to point, the driver does not know the FC4's supported
by the other end. In Fabrics, it can query the nameserver. Thus the driver
must send PRLIs for the FC4s it supports and enable support based on the
acc(ept) or rej(ect) of the respective FC4 PRLI. Currently the driver
supports SCSI and NVMe PRLIs.
Unfortunately, although the behavior is per standard, many devices have
come to expect only SCSI PRLIs. In this particular example, the NVMe PRLI
is properly RJT'd but the target decided that it must LOGO after seeing the
unexpected NVMe PRLI. The LOGO causes the sequence to restart and login is
now in an infinite failure loop.
Fix the problem by having the driver, on a pt2pt link, remember NVMe PRLI
accept or reject status across logout as long as the link stays "up". When
retrying login, if the prior NVMe PRLI was rejected, it will not be sent on
the next login.
Link: https://lore.kernel.org/r/20220212163120.15385-1-jsmart2021@gmail.com
Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
