| Age | Commit message (Collapse) | Author |
|---|
|
git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- tegra: support for Tegra264
- broadcom: convert bcm2835 bindings from txt to yaml bcm2835
- qcom: support for IPQ5018
- ti: always zero TX data fields
* tag 'mailbox-v6.5' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: ti-msgmgr: Fill non-message tx data fields with 0x0
mailbox: tegra: add support for Tegra264
dt-bindings: mailbox: tegra: Document Tegra264 HSP
dt-bindings: mailbox: convert bcm2835-mbox bindings to YAML
dt-bindings: mailbox: qcom: Add IPQ5018 APCS compatible
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"The isl1208 dirver was reworked tobe able to work as part of an MFD.
All the Loongson chips are now supported through a new driver, the old
one is removed.
Summary:
Subsystem:
- Switch i2c drivers back to use .probe()
- Constify pointers to hwmon_channel_info
New driver:
- Loongson on chip RTC, replacing the Loongson 1 only driver
Drivers:
- isl1208: cleanup and support for RAA215300
- st-lpc: cleanups
- stm32: fix wakeup"
* tag 'rtc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (21 commits)
rtc: Add rtc driver for the Loongson family chips
rtc: Remove the Loongson-1 RTC driver
dt-bindings: rtc: Split loongson,ls2x-rtc into SoC-based compatibles
rtc: rv3028: make rv3028 probeable from userspace
rtc: isl1208: Add support for the built-in RTC on the PMIC RAA215300
rtc: isl1208: Add isl1208_set_xtoscb()
rtc: isl1208: Drop enum isl1208_id and split isl1208_configs[]
rtc: isl1208: Make similar I2C and DT-based matching table
rtc: isl1208: Drop name variable
dt-bindings: rtc: isil,isl1208: Document clock and clock-names properties
dt-bindings: rtc: isl1208: Convert to json-schema
rtc: st-lpc: Simplify clk handling in st_rtc_probe()
rtc: st-lpc: Release some resources in st_rtc_probe() in case of error
rtc: stm32: remove dedicated wakeup management
dt-bindings: rtc: restrict node name suffixes
rtc: add HAS_IOPORT dependencies
rtc: Switch i2c drivers back to use .probe()
rtc: rv3032: constify pointers to hwmon_channel_info
rtc: isl12022: constify pointers to hwmon_channel_info
rtc: ds3232: constify pointers to hwmon_channel_info
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
- svc: fix suspend/resume on some platforms, fix locking issues
* tag 'i3c/for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: svc: add NACK check after start byte sent
i3c: master: svc: fix cpu schedule in spin lock
i3c: master: svc: fix i3c suspend/resume issue
|
|
Commit 408579cd627a ("mm: Update do_vmi_align_munmap() return
semantics") made the return value and locking semantics of
do_vmi_align_munmap() more straightforward, but in the process it ended
up unlocking the mmap lock just a tad too early: the debug code doing
the mmap layout validation still needs to run with the lock held, or
things might change under it while it's trying to validate things.
So just move the unlocking to after the validate_mm() call.
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/lkml/ZKIsoMOT71uwCIZX@xsang-OptiPlex-9020/
Fixes: 408579cd627a ("mm: Update do_vmi_align_munmap() return semantics")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We do not want to add prototypes for all parisc specific syscalls, so
simply drop such warnings when building the kernel.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The math-emu code is a snapshot from the HP-UX kernel. They've
been modified as little as possible.
See arch/parisc/math-emu/README.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Raise the minimum gcc version for parisc64 to 12.0.0 (for __int128 type)
and keep 5.1.0 as minimum for 32-bit parisc target.
Fixes: 8664645ade97 ("parisc: Raise minimal GCC version")
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
While our user stacks can grow either down (all common architectures) or
up (parisc and the ia64 register stack), the initial stack setup when we
copy the argument and environment strings to the new stack at execve()
time is always done by extending the stack downwards.
But it turns out that in commit 8d7071af8907 ("mm: always expand the
stack with the mmap write lock held"), as part of making the stack
growing code more robust, 'expand_downwards()' was now made to actually
check the vma flags:
if (!(vma->vm_flags & VM_GROWSDOWN))
return -EFAULT;
and that meant that this execve-time stack expansion started failing on
parisc, because on that architecture, the stack flags do not contain the
VM_GROWSDOWN bit.
At the same time the new check in expand_downwards() is clearly correct,
and simplified the callers, so let's not remove it.
The solution is instead to just codify the fact that yes, during
execve(), the stack grows down. This not only matches reality, it ends
up being particularly simple: we already have special execve-time flags
for the stack (VM_STACK_INCOMPLETE_SETUP) and use those flags to avoid
page migration during this setup time (see vma_is_temporary_stack() and
invalid_migration_vma()).
So just add VM_GROWSDOWN to that set of temporary flags, and now our
stack flags automatically match reality, and the parisc stack expansion
works again.
Note that the VM_STACK_INCOMPLETE_SETUP bits will be cleared when the
stack is finalized, so we only add the extra VM_GROWSDOWN bit on
CONFIG_STACK_GROWSUP architectures (ie parisc) rather than adding it in
general.
Link: https://lore.kernel.org/all/612eaa53-6904-6e16-67fc-394f4faa0e16@bell.net/
Link: https://lore.kernel.org/all/5fd98a09-4792-1433-752d-029ae3545168@gmx.de/
Fixes: 8d7071af8907 ("mm: always expand the stack with the mmap write lock held")
Reported-by: John David Anglin <dave.anglin@bell.net>
Reported-and-tested-by: Helge Deller <deller@gmx.de>
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
./fs/xfs/xfs_extfree_item.c:723:3-4: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5728
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Similar to the recent patch strengthening the AGF agf_length
verification, the AGI verifier does not check that the AGI length field
is within known good bounds. This isn't currently checked by runtime
kernel code, yet we assume in many places that it is correct and verify
other metadata against it.
Add length verification to the AGI verifier. Just like the AGF length
checking, the length of the AGI must be equal to the size of the AG
specified in the superblock, unless it is the last AG in the filesystem.
In that case, it must be less than or equal to sb->sb_agblocks and
greater than XFS_MIN_AG_BLOCKS, which is the smallest AG a growfs
operation will allow to exist.
There's only one place in the filesystem that actually uses agi_length,
but let's not leave it vulnerable to the same weird nonsense that
generates syzbot bugs, eh?
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Avoid gcc warning about missing prototype for start_cpu_itimer().
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Include linux/proc_fs.h to avoid compiler warning about missing
prototype for 'arch_report_meminfo'
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The parameter name in the function declaration and definition
should be the same.
drivers/vhost/vhost.h,
int vhost_get_vq_desc(..., unsigned int iov_count,...);
drivers/vhost/vhost.c,
int vhost_get_vq_desc(..., unsigned int iov_size,...)
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Message-Id: <20230621093835.36878-1-xianting.tian@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
vduse_vdpa_set_vq_affinity callback can be called
with NULL value as cpu_mask when deleting the vduse
device.
This patch resets virtqueue's IRQ affinity mask value
to set all CPUs instead of dereferencing NULL cpu_mask.
[ 4760.952149] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 4760.959110] #PF: supervisor read access in kernel mode
[ 4760.964247] #PF: error_code(0x0000) - not-present page
[ 4760.969385] PGD 0 P4D 0
[ 4760.971927] Oops: 0000 [#1] PREEMPT SMP PTI
[ 4760.976112] CPU: 13 PID: 2346 Comm: vdpa Not tainted 6.4.0-rc6+ #4
[ 4760.982291] Hardware name: Dell Inc. PowerEdge R640/0W23H8, BIOS 2.8.1 06/26/2020
[ 4760.989769] RIP: 0010:memcpy_orig+0xc5/0x130
[ 4760.994049] Code: 16 f8 4c 89 07 4c 89 4f 08 4c 89 54 17 f0 4c 89 5c 17 f8 c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 83 fa 08 72 1b <4c> 8b 06 4c 8b 4c 16 f8 4c 89 07 4c 89 4c 17 f8 c3 cc cc cc cc 66
[ 4761.012793] RSP: 0018:ffffb1d565abb830 EFLAGS: 00010246
[ 4761.018020] RAX: ffff9f4bf6b27898 RBX: ffff9f4be23969c0 RCX: ffff9f4bcadf6400
[ 4761.025152] RDX: 0000000000000008 RSI: 0000000000000000 RDI: ffff9f4bf6b27898
[ 4761.032286] RBP: 0000000000000000 R08: 0000000000000008 R09: 0000000000000000
[ 4761.039416] R10: 0000000000000000 R11: 0000000000000600 R12: 0000000000000000
[ 4761.046549] R13: 0000000000000000 R14: 0000000000000080 R15: ffffb1d565abbb10
[ 4761.053680] FS: 00007f64c2ec2740(0000) GS:ffff9f635f980000(0000) knlGS:0000000000000000
[ 4761.061765] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4761.067513] CR2: 0000000000000000 CR3: 0000001875270006 CR4: 00000000007706e0
[ 4761.074645] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4761.081775] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 4761.088909] PKRU: 55555554
[ 4761.091620] Call Trace:
[ 4761.094074] <TASK>
[ 4761.096180] ? __die+0x1f/0x70
[ 4761.099238] ? page_fault_oops+0x171/0x4f0
[ 4761.103340] ? exc_page_fault+0x7b/0x180
[ 4761.107265] ? asm_exc_page_fault+0x22/0x30
[ 4761.111460] ? memcpy_orig+0xc5/0x130
[ 4761.115126] vduse_vdpa_set_vq_affinity+0x3e/0x50 [vduse]
[ 4761.120533] virtnet_clean_affinity.part.0+0x3d/0x90 [virtio_net]
[ 4761.126635] remove_vq_common+0x1a4/0x250 [virtio_net]
[ 4761.131781] virtnet_remove+0x5d/0x70 [virtio_net]
[ 4761.136580] virtio_dev_remove+0x3a/0x90
[ 4761.140509] device_release_driver_internal+0x19b/0x200
[ 4761.145742] bus_remove_device+0xc2/0x130
[ 4761.149755] device_del+0x158/0x3e0
[ 4761.153245] ? kernfs_find_ns+0x35/0xc0
[ 4761.157086] device_unregister+0x13/0x60
[ 4761.161010] unregister_virtio_device+0x11/0x20
[ 4761.165543] device_release_driver_internal+0x19b/0x200
[ 4761.170770] bus_remove_device+0xc2/0x130
[ 4761.174782] device_del+0x158/0x3e0
[ 4761.178276] ? __pfx_vdpa_name_match+0x10/0x10 [vdpa]
[ 4761.183336] device_unregister+0x13/0x60
[ 4761.187260] vdpa_nl_cmd_dev_del_set_doit+0x63/0xe0 [vdpa]
Fixes: 28f6288eb63d ("vduse: Support set_vq_affinity callback")
Cc: xieyongji@bytedance.com
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Message-Id: <20230622204851.318125-1-maxime.coquelin@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
|
|
This patch drops the requirement that we can only switch workers if work
has not been queued by using RCU for the vq based queueing paths and a
mutex for the device wide flush.
We can also use this to support SIGKILL properly in the future where we
should exit almost immediately after getting that signal. With this
patch, when get_signal returns true, we can set the vq->worker to NULL
and do a synchronize_rcu to prevent new work from being queued to the
vhost_task that has been killed.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-18-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This has vhost-scsi support the worker ioctls by calling the
vhost_worker_ioctl helper.
With a single worker, the single thread becomes a bottlneck when trying
to use 3 or more virtqueues like:
fio --filename=/dev/sdb --direct=1 --rw=randrw --bs=4k \
--ioengine=libaio --iodepth=128 --numjobs=3
With the patches and doing a worker per vq, we can scale to at least
16 vCPUs/vqs (that's my system limit) with the same command fio command
above with numjobs=16:
fio --filename=/dev/sdb --direct=1 --rw=randrw --bs=4k \
--ioengine=libaio --iodepth=64 --numjobs=16
which gives around 2002K IOPs.
Note that for testing I dropped depth to 64 above because the vhost/virt
layer supports only 1024 total commands per device. And the only tuning I
did was set LIO's emulate_pr to 0 to avoid LIO's PR lock in the main IO
path which becomes an issue at around 12 jobs/virtqueues.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-17-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
For vhost-scsi with 3 vqs or more and a workload that tries to use
them in parallel like:
fio --filename=/dev/sdb --direct=1 --rw=randrw --bs=4k \
--ioengine=libaio --iodepth=128 --numjobs=3
the single vhost worker thread will become a bottlneck and we are stuck
at around 500K IOPs no matter how many jobs, virtqueues, and CPUs are
used.
To better utilize virtqueues and available CPUs, this patch allows
userspace to create workers and bind them to vqs. You can have N workers
per dev and also share N workers with M vqs on that dev.
This patch adds the interface related code and the next patch will hook
vhost-scsi into it. The patches do not try to hook net and vsock into
the interface because:
1. multiple workers don't seem to help vsock. The problem is that with
only 2 virtqueues we never fully use the existing worker when doing
bidirectional tests. This seems to match vhost-scsi where we don't see
the worker as a bottleneck until 3 virtqueues are used.
2. net already has a way to use multiple workers.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-16-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The next patch allows userspace to create multiple workers per device,
so this patch replaces the vhost_worker pointer with an xarray so we
can store mupltiple workers and look them up.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-15-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The next patches add new vhost worker ioctls which will need to get a
vhost_virtqueue from a userspace struct which specifies the vq's index.
This moves the vhost_vring_ioctl code to do this to a helper so it can
be shared.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-14-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
vhost_work_queue is no longer used. Each driver is using the poll or vq
based queueing, so remove vhost_work_queue.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-13-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
With one worker we will always send the scsi cmd responses then send the
TMF rsp, because LIO will always complete the scsi cmds first then call
into us to send the TMF response.
With multiple workers, the IO vq workers could be running while the
TMF/ctl vq worker is running so this has us do a flush before completing
the TMF to make sure cmds are completed when it's work is later queued
and run.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-12-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Convert from vhost_work_queue to vhost_vq_work_queue so we can
remove vhost_work_queue.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-11-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This patch separates the scsi cmd completion code paths so we can complete
cmds based on their vq instead of having all cmds complete on the same
worker/CPU. This will be useful with the next patches that allow us to
create mulitple worker threads and bind them to different vqs, and we can
have completions running on different threads/CPUs.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230626232307.97930-10-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Convert from vhost_work_queue to vhost_vq_work_queue, so we can drop
vhost_work_queue.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-9-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This has the drivers pass in their poll to vq mapping and then converts
the core poll code to use the vq based helpers. In the next patches we
will allow vqs to be handled by different workers, so to allow drivers
to execute operations like queue, stop, flush, etc on specific polls/vqs
we need to know the mappings.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-8-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This patch has the core work flush function take a worker. When we
support multiple workers we can then flush each worker during device
removal, stoppage, etc. It also adds a helper to flush specific
virtqueues, so vhost-scsi can flush IO vqs from it's ctl vq.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-7-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This patch has the core work queueing function take a worker for when we
support multiple workers. It also adds a helper that takes a vq during
queueing so modules can control which vq/worker to queue work on.
This temp leaves vhost_work_queue. It will be removed when the drivers
are converted in the next patches.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-6-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
In the next patches each vq might have different workers so one could
have work but others do not. For net, we only want to check specific vqs,
so this adds a helper to check if a vq has work pending and converts
vhost-net to use it.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230626232307.97930-5-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This patchset allows userspace to map vqs to different workers. This
patch adds a worker pointer to the vq so in later patches in this set
we can queue/flush specific vqs and their workers.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-4-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This patchset allows us to allocate multiple workers, so this has us
move from the vhost_worker that's embedded in the vhost_dev to
dynamically allocating it.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-3-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
vsock can start queueing work after VHOST_VSOCK_SET_GUEST_CID, so
after we have called vhost_worker_create it can be calling
vhost_work_queue and trying to access the vhost worker/task. If
vhost_dev_alloc_iovecs fails, then vhost_worker_free could free
the worker/task from under vsock.
This moves vhost_worker_create to the end of vhost_dev_set_owner
where we know we can no longer fail in that path. If it fails
after the VHOST_SET_OWNER and userspace closes the device, then
the normal vsock release handling will do the right thing.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-2-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
For virtio-net we were getting CPU stall warnings, and fixed it by
calling the scheduler: see f8bb51043945 ("virtio_net: suppress cpu stall
when free_unused_bufs").
This driver is similar so theoretically the same logic applies.
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Message-Id: <20230609131817.712867-4-xianting.tian@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
For virtio-net we were getting CPU stall warnings, and fixed it by
calling the scheduler: see f8bb51043945 ("virtio_net: suppress cpu stall
when free_unused_bufs").
This driver is similar so theoretically the same logic applies.
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Message-Id: <20230609131817.712867-3-xianting.tian@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
For virtio-net we were getting CPU stall warnings, and fixed it by
calling the scheduler: see f8bb51043945 ("virtio_net: suppress cpu stall
when free_unused_bufs").
This driver is similar so theoretically the same logic applies.
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Message-Id: <20230609131817.712867-2-xianting.tian@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This commit implements a better layout of the
live migration bar, therefore the accessors for virtqueue
state have been refactored.
This commit also add a comment to the probing-ids list,
indicating this driver drives F2000X-PL virtio-net
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Message-Id: <20230612151420.1019504-4-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Rather than a hardcode, this commit detects
and reports the max value of allowed size
of the virtqueues
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Message-Id: <20230612151420.1019504-3-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This commit dynamically allocates the data
stores for the virtqueues based on
virtio_pci_common_cfg.num_queues.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Message-Id: <20230612151420.1019504-2-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
While initially I thought that we couldn't move all new mount api
handling into params.{c,h} it turns out it is possible. So this just
moves a good chunk of code out of super.c and into params.{c,h}.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
kdb_send_sig() is defined in the signal code and called from kdb,
but the declaration is part of the kdb internal code.
Move the declaration to the shared header to avoid the warning:
kernel/signal.c:4789:6: error: no previous prototype for 'kdb_send_sig' [-Werror=missing-prototypes]
Reported-by: Arnd Bergmann <arnd@arndb.de>
Closes: https://lore.kernel.org/lkml/20230517125423.930967-1-arnd@kernel.org/
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20230630201206.2396930-1-daniel.thompson@linaro.org
|
|
Pull iomap updates from Darrick Wong:
- Fix a type signature mismatch
- Drop Christoph as maintainer
* tag 'iomap-6.5-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: drop me [hch] from MAINTAINERS for iomap
fs: iomap: Change the type of blocksize from 'int' to 'unsigned int' in iomap_file_buffered_write_punch_delalloc
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fix from Christian Brauner:
"A fix for the backing file work from this cycle.
When init_file() failed it would call file_free_rcu() on the file
allocated by the caller of init_file(). It naively assumed that the
correct cleanup operation would be called depending on whether it is a
regular file or a backing file. However, that presupposes that the
FMODE_BACKING flag would already be set which it won't be as that is
done in the caller of init_file().
Fix that bug by moving the cleanup of the allocated file into the
caller where it belongs in the first place. There's no good reason for
init_file() to consume resources it didn't allocate. This is a
mainline only fix and was reported by syzbot. The fix was validated by
syzbot against the provided reproducer"
* tag 'v6.5/vfs.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: move cleanup from init_file() into its callers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- I2C has now a co-maintainer taking care of the host drivers. Welcome
Andi Shyti and have fun!
- platform remove callback converted to return void in drivers
- simplify drivers by using devm_clk_get_enabled()
- introduce i2c_get_match_data() to avoid more boilerplate code
(especially since the core stopped delivering an i2c_device_id)
- and the usual bunch of driver updates
* tag 'i2c-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits)
i2c: uniphier: Use devm_clk_get_enabled()
i2c: uniphier-f: Use devm_clk_get_enabled()
i2c: owl: Use devm_clk_get_enabled()
i2c: lpc2k: Use devm_clk_get_enabled()
i2c: hix5hd2: Use devm_clk_get_enabled()
i2c: sun6i-p2wi: Use devm_clk_get_enabled()
i2c: pasemi-platform: Use devm_clk_get_enabled()
i2c: mt7621: Use devm_clk_get_enabled()
i2c: xiic: Use devm_clk_get_enabled()
i2c: davinci: Use platform table macro over module_alias
i2c: ocores: use devm_ managed clks
i2c: nomadik: Use dev_err_probe() whenever possible
i2c: nomadik: Use devm_clk_get_enabled()
i2c: nomadik: Remove unnecessary goto label
usb: typec: ucsi: Mark dGPUs as DEVICE scope
i2c: wmt: Use devm_platform_get_and_ioremap_resource()
i2c: versatile: Use devm_platform_get_and_ioremap_resource()
i2c: hix5hd2: Add I2C_M_STOP flag support for i2c-hix5hd2 driver.
i2c: mpc: Use of_property_read_reg() to parse "reg"
i2c: imx-lpi2c: Don't open-code DIV_ROUND_UP
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
- Add missing cacheflush() syscall
- Fix STI console on 64-bit-only machines
- Move kernel debug options to Kconfig.debug
- Lots of warning fixes in arch/parisc/ and drivers/parisc/ when
compiled with W=1
- Enable some more graphics drivers in refreshed defconfigs
* tag 'parisc-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: (29 commits)
parisc: Refresh defconfigs
parisc: irq: Add irq-related function declarations
parisc: Move init function declarations into header file
parisc: dino: Make dino_init() returning void
parisc: lba_pci: Mark two variables __maybe_unused
parisc: unaligned: Include header file to avoid missing prototype warnings
parisc: signal: Mark do_notify_resume() and sys_rt_sigreturn() asmlinkage
parisc: unwind: Mark start and stop variables __maybe_unused
parisc: init: Drop unused variable end_paddr
parisc: traps: Mark functions static
parisc: processor: Fix kdoc for init_cpu_profiler()
parisc: sys_parisc: parisc_personality() is called from asm code
parisc: ccio-dma: Fix kdoc and compiler warnings
parisc: pdc_stable: Fix kdoc and compiler warnings
parisc: pci-dma: Make pcxl_alloc_range() static
parisc: Mark image_size __maybe_unused in perf_write()
parisc: module: Mark symindex __maybe_unused
parisc: pdc_chassis: Fix kdoc warnings
parisc: firmware: Fix kdoc warnings
parisc: drivers: Fix kdoc warnings
...
|
|
The value of "end" should be "start + length - 1".
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Use struct initializers to ensure that the xfs_btree_irecs passed into
the query_range function are completely initialized. No functional
changes, just closing some sloppy hygiene.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Improve the validation of the fsmap offset fields in the query keys and
move the validation to the top of the function now that we have pushed
the low key adjustment code downwards.
Also fix some indenting issues that aren't worth a separate patch.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
The external log device fsmap backend doesn't have an rmapbt to query,
so it's wasteful to spend time initializing the rmap_irec objects.
Worse yet, the log could (someday) be longer than 2^32 fsblocks, so
using the rmap irec structure will result in integer overflows.
Fix this mess by computing the start address that we want from keys[0]
directly, and use the daddr-based record filtering algorithm that we
also use for rtbitmap queries.
Fixes: e89c041338ed ("xfs: implement the GETFSMAP ioctl")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
The rtbitmap fsmap backend doesn't query the rmapbt, so it's wasteful to
spend time initializing the rmap_irec objects. Worse yet, the logic to
query the rtbitmap is spread across three separate functions, which is
unnecessarily difficult to follow.
Compute the start rtextent that we want from keys[0] directly and
combine the functions to avoid passing parameters around everywhere, and
consolidate all the logic into a single function. At one point many
years ago I intended to use __xfs_getfsmap_rtdev as the launching point
for realtime rmapbt queries, but this hasn't been the case for a long
time.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
The realtime section ends at the last rt extent. If the user configures
the rt geometry with an extent size that is not an integer factor of the
number of rt blocks, it's possible for there to be rt blocks past the
end of the last rt extent. These tail blocks cannot ever be allocated
and will cause corruption reports if the last extent coincides with the
end of an rt bitmap block, so do not report consider them for the
GETFSMAP output.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
