summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-04-13usb: host: xhci: add a new quirk XHCI_NO_64BIT_SUPPORTYoshihiro Shimoda
On some xHCI controllers (e.g. R-Car SoCs), the AC64 bit (bit 0) of HCCPARAMS1 is set to 1. However, the xHCs don't support 64-bit address memory pointers actually. So, in this case, this driver should call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in xhci_gen_setup(). Otherwise, the xHCI controller will be died after a usb device is connected if it runs on above 4GB physical memory environment. So, this patch adds a new quirk XHCI_NO_64BIT_SUPPORT to resolve such an issue. Cc: <stable@vger.kernel.org> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-13xhci: resume USB 3 roothub firstMathias Nyman
Give USB3 devices a better chance to enumerate at USB 3 speeds if they are connected to a suspended host. Solves an issue with NEC uPD720200 host hanging when partially enumerating a USB3 device as USB2 after host controller runtime resume. Cc: <stable@vger.kernel.org> Tested-by: Mike Murdoch <main.haarp@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-13usb: xhci: applying XHCI_PME_STUCK_QUIRK to Intel BXT B0 hostRafal Redzimski
Broxton B0 also requires XHCI_PME_STUCK_QUIRK. Adding PCI device ID for Broxton B and adding to quirk. Cc: <stable@vger.kernel.org> Signed-off-by: Rafal Redzimski <rafal.f.redzimski@intel.com> Signed-off-by: Robert Dobrowolski <robert.dobrowolski@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-13cdc-acm: fix crash if flushed with nothing bufferedOliver Neukum
Under some circumstances acm_tty_flush_chars() is called with no buffer to flush. We simply need to do nothing. Signed-off-by: Oliver Neukum <ONeukum@suse.com> Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-13lib: lz4: cleanup unaligned access efficiency detectionRui Salvaterra
These identifiers are bogus. The interested architectures should define HAVE_EFFICIENT_UNALIGNED_ACCESS whenever relevant to do so. If this isn't true for some arch, it should be fixed in the arch definition. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-13lib: lz4: fixed zram with lz4 on big endian machinesRui Salvaterra
Based on Sergey's test patch [1], this fixes zram with lz4 compression on big endian cpus. Note that the 64-bit preprocessor test is not a cleanup, it's part of the fix, since those identifiers are bogus (for example, __ppc64__ isn't defined anywhere else in the kernel, which means we'd fall into the 32-bit definitions on ppc64). Tested on ppc64 with no regression on x86_64. [1] http://marc.info/?l=linux-kernel&m=145994470805853&w=4 Cc: stable@vger.kernel.org Suggested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-13dmaengine: dw: fix master selectionAndy Shevchenko
The commit 895005202987 ("dmaengine: dw: apply both HS interfaces and remove slave_id usage") cleaned up the code to avoid usage of depricated slave_id member of generic slave configuration. Meanwhile it broke the master selection by removing important call to dwc_set_masters() in ->device_alloc_chan_resources() which copied masters from custom slave configuration to the internal channel structure. Everything works until now since there is no customized connection of DesignWare DMA IP to the bus, i.e. one bus and one or more masters are in use. The configurations where 2 masters are connected to the different masters are not working anymore. We are expecting one user of such configuration and need to select masters properly. Besides that it is obviously a performance regression since only one master is in use in multi-master configuration. Select masters in accordance with what user asked for. Keep this patch in a form more suitable for back porting. We are safe to take necessary data in ->device_alloc_chan_resources() because we don't support generic slave configuration embedded into custom one, and thus the only way to provide such is to use the parameter to a filter function which is called exactly before channel resource allocation. While here, replase BUG_ON to less noisy dev_warn() and prevent channel allocation in case of error. Fixes: 895005202987 ("dmaengine: dw: apply both HS interfaces and remove slave_id usage") Cc: stable@vger.kernel.org Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu/coldfire fix from Greg Ungerer: "Only a single change that removes a local arch specific gpio bus sysfs device that now clashes with the generic gpio bus sysfs device interface" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k/gpio: remove arch specific sysfs bus device
2016-04-13Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A batch of fixes for -rc4, for various platforms. Nothing really substantial and worth pointing out in particular; small fixes for various bugs, see shortlog for details" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: sa1100: remove references to the defunct handhelds.org bus: uniphier-system-bus: fix condition of overlap check ARM: uniphier: drop weird sizeof() ARM: dts: am335x-baltos-ir5221: fix cpsw_emac0 link type ARM: OMAP: Correct interrupt type for ARM TWD ARM: DRA722: Add ID detect for Silicon Rev 2.0 ARM: dts: am43xx: fix edma memcpy channel allocation ARM: dts: AM43x-epos: Fix clk parent for synctimer ARM: OMAP2: Fix up interconnect barrier initialization for DRA7 documentation: Fix pinctrl documentation for Meson8 / Meson8b ARM: dts: amlogic: Split pinctrl device for Meson8 / Meson8b ARM: mvebu: Correct unit address for linksys bus: mvebu-mbus: use %pa to print phys_addr_t arm64: dts: vulcan: Update PCI ranges ARM: u8500_defconfig: turn on the Synaptics RMI4 driver ARM: pxa: fix the number of DMA requestor lines ARM: OMAP2+: hwmod: Fix updating of sysconfig register ARM: OMAP2+: Use srst_udelay for USB on dm814x
2016-04-13Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Radim Krčmář: "ARM fixes: - Wrong indentation in the PMU code from the merge window - A long-time bug occuring with running ntpd on the host, candidate for stable - Properly handle (and warn about) the unsupported configuration of running on systems with less than 40 bits of PA space - More fixes to the PM and hotplug notifier stuff from the merge window x86: - leak of guest xcr0 (typically shows up as SIGILL) - new maintainer (who is sending the pull request too) - fix for merge window regression - fix for guest CPUID" Paolo Bonzini points out: "For the record, this tag is signed by me because I prepared the pull request. Further pull requests for 4.6 will be signed and sent out by Radim directly" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: mask CPUID(0xD,0x1).EAX against host value kvm: x86: do not leak guest xcr0 into host interrupt handlers KVM: MMU: fix permission_fault() KVM: new maintainer on the block arm64: KVM: unregister notifiers in hyp mode teardown path arm64: KVM: Warn when PARange is less than 40 bits KVM: arm/arm64: Handle forward time correction gracefully arm64: KVM: Add braces to multi-line if statement in virtual PMU code
2016-04-13phy: rockchip-emmc: adapt binding to specifiy register offset and lengthHeiko Stuebner
The emmc-phy occupies a contiguous set of 8 registers inside the general register files, so the reg property should specify this. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-04-13phy: rockchip-emmc: should be a child device of the GRFHeiko Stuebner
The emmc-phy is fully enclosed in the general register files (GRF). Therefore as seen from the device-tree it shouldn't be a separate platform- device but instead a sub-device of the GRF - using the simply-mfd mechanism. The driver entered the kernel in the current merge-window, so we can still adapt the binding without needing a fallback, as the binding hasn't been released with a full kernel yet. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-04-13phy: rockchip-dp: should be a child device of the GRFHeiko Stuebner
The displayport-phy is fully enclosed in the general register files (GRF). Therefore as seen from the device-tree it shouldn't be a separate platform- device but instead a sub-device of the GRF - using the simply-mfd mechanism. The driver entered the kernel in the current merge-window, so we can still adapt the binding without needing a fallback, as the binding hasn't been released with a full kernel yet. While the edp phy is fully part of the GRF, it doesn't have any separate register set there, so doesn't get any register-area assigned. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-04-13Revert "soc: mediatek: SCPSYS: Fix double enabling of regulators"James Liao
This reverts commit cc8ed76938b5cf6a54ab3d60edabaf808dc960d1 ("soc: mediatek: SCPSYS: Fix double enabling of regulators") [1]. This patch fixes mt8173-evb failing boot issue. With commit [1], genpd state will not sync to real power domain state. So some resources such as clocks and regulators may stay in a wrong state. There is no regulator double enabling issue on mainline kernel, so we can refert commit [1] safely. Signed-off-by: James Liao <jamesjj.liao@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2016-04-13x86/mce: Avoid using object after free in genpoolTony Luck
When we loop over all queued machine check error records to pass them to the registered notifiers we use llist_for_each_entry(). But the loop calls gen_pool_free() for the entry in the body of the loop - and then the iterator looks at node->next after the free. Use llist_for_each_entry_safe() instead. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/0205920@agluck-desk.sc.intel.com Link: http://lkml.kernel.org/r/1459929916-12852-4-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-13ARM: mach-imx: sdhci-esdhc-imx: initialize DMA maskAlexander Kurz
With commit 7b91369b4655 ("mmc: sdhci: Set DMA mask when adding host") DMA access got disabled for device drivers with zero DMA mask property. sdhci-esdhc-imx got blocked from DMA access by this. Hence: initialize the DMA mask to enable access again. Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-13ALSA: hda - Fix inconsistent monitor_present state until repollTakashi Iwai
While the previous commit fixed the missing monitor_present flag update, it may be still in an inconsistent state while the driver repolls: the flag itself is updated, but the eld_valid flag and the contents don't follow until the repoll finishes (and may be repeated for a few times). The basic problem is that pin_eld->monitor_present is updated in the caller side. This should have been updated only in update_eld(). So, the proper fix is to avoid accessing pin_eld but only spec->temp_eld. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-13ALSA: hda - Fix regression of monitor_present flag in eld proc fileHyungwon Hwang
The commit [bd48128539ab: ALSA: hda - Fix forgotten HDMI monitor_present update] covered the missing update of monitor_present flag, but this caused a regression for devices without the i915 eld notifier. Since the old code supposed that pin_eld->monitor_present was updated by the caller side, the hdmi_present_sense_via_verbs() doesn't update the temporary eld->monitor_present but only pin_eld->monitor_present, which is now overridden in update_eld(). The fix is to update pin_eld->monitor_present as well before calling update_eld(). Note that this may still leave monitor_present flag in an inconsistent state when the driver repolls, but this is at least the old behavior. More proper fix will follow in the later patch. Fixes: bd48128539ab ('ALSA: hda - Fix forgotten HDMI monitor_present update') Signed-off-by: Hyungwon Hwang <hyungwon.hwang7@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-12ext4/fscrypto: avoid RCU lookup in d_revalidateJaegeuk Kim
As Al pointed, d_revalidate should return RCU lookup before using d_inode. This was originally introduced by: commit 34286d666230 ("fs: rcu-walk aware d_revalidate method"). Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Theodore Ts'o <tytso@mit.edu> Cc: stable <stable@vger.kernel.org>
2016-04-13Merge tag 'keys-fixes-20160412' of ↵James Morris
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs into for-linus
2016-04-13netfilter: ebtables: Fix extension lookup with identical namePhil Sutter
If a requested extension exists as module and is not loaded, ebt_check_match() might accidentally use an NFPROTO_UNSPEC one with same name and fail. Reproduced with limit match: Given xt_limit and ebt_limit both built as module, the following would fail: modprobe xt_limit ebtables -I INPUT --limit 1/s -j ACCEPT The fix is to make ebt_check_match() distrust a found NFPROTO_UNSPEC extension and retry after requesting an appropriate module. Cc: Florian Westphal <fw@strlen.de> Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-04-12debugfs: Make automount point inodes permanently emptySeth Forshee
Starting with 4.1 the tracing subsystem has its own filesystem which is automounted in the tracing subdirectory of debugfs. Prior to this debugfs could be bind mounted in a cloned mount namespace, but if tracefs has been mounted under debugfs this now fails because there is a locked child mount. This creates a regression for container software which bind mounts debugfs to satisfy the assumption of some userspace software. In other pseudo filesystems such as proc and sysfs we're already creating mountpoints like this in such a way that no dirents can be created in the directories, allowing them to be exceptions to some MNT_LOCKED tests. In fact we're already do this for the tracefs mountpoint in sysfs. Do the same in debugfs_create_automount(), since the intention here is clearly to create a mountpoint. This fixes the regression, as locked child mounts on permanently empty directories do not cause a bind mount to fail. Cc: stable@vger.kernel.org # v4.1+ Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-12i2c: ismt: Add Intel DNV PCI IDMika Westerberg
Intel DNV has the same iSMT SMBus host controller than Intel Avoton. Add DNV PCI ID to the list of supported devices. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-04-12i2c: xlp9xx: add support for Broadcom VulcanTanmay Jagdale
The Broadcom Vulcan ARM64 processor uses the same I2C controller present on the Broadcom XLP9xx/5xx MIPS processor family. Updated the Kconfig by adding ARCH_VULCAN option. Signed-off-by: Tanmay Jagdale <tanmay.jagdale@broadcom.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-04-12i2c: rk3x: add support for rk3228Yakir Yang
Enable the I2C core for this SoC. Signed-off-by: Yakir Yang <ykk@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-04-12Merge tag 'mvebu-fixes-4.6-1' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson
mvebu fixes for 4.6 (part 1) - fix USB adress register for Linksys Armada 388 based boards - fix build warning in mvebu-mbus * tag 'mvebu-fixes-4.6-1' of git://git.infradead.org/linux-mvebu: ARM: mvebu: Correct unit address for linksys bus: mvebu-mbus: use %pa to print phys_addr_t Signed-off-by: Olof Johansson <olof@lixom.net>
2016-04-12ARM: sa1100: remove references to the defunct handhelds.orgLinus Walleij
The website handhelds.org has been down for a long time and is likely never coming back online. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-04-12Merge tag 'pxa-fixes-v4.6' of https://github.com/rjarzmik/linux into fixesOlof Johansson
ARM: pxa: fixes for v4.6 There is only a single fix for dma requestor lines initial setup, triggered by dmaengine previous fix. * tag 'pxa-fixes-v4.6' of https://github.com/rjarzmik/linux: ARM: pxa: fix the number of DMA requestor lines Signed-off-by: Olof Johansson <olof@lixom.net>
2016-04-12Merge tag 'omap-for-v4.6/fixes-rc1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omaps against v4.6-rc1. Mostly minor fixes for the newer SoCs with few board fixes and a fix for a long time hwmod bug: - Fix cpsw_emac0 link type for baltos-ir5221 - Fix interrupt type for TWD - Fix edma memcpy channel allocation for am43x - Fix am43x-epos sycntimer32k by using the correct assigned clock - Fix interconnect barrier for dra7 - Fix a long time hwmod bug for updating sysconfig register properly - Fix flakey booting on dm814x where USB reset needs a delay And there is one minor change that is not strictly a fix, but is good to have for proper hardware detection: - Detect dra7 silicon revision 2.0 properly * tag 'omap-for-v4.6/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-baltos-ir5221: fix cpsw_emac0 link type ARM: OMAP: Correct interrupt type for ARM TWD ARM: DRA722: Add ID detect for Silicon Rev 2.0 ARM: dts: am43xx: fix edma memcpy channel allocation ARM: dts: AM43x-epos: Fix clk parent for synctimer ARM: OMAP2: Fix up interconnect barrier initialization for DRA7 ARM: OMAP2+: hwmod: Fix updating of sysconfig register ARM: OMAP2+: Use srst_udelay for USB on dm814x Signed-off-by: Olof Johansson <olof@lixom.net>
2016-04-12bus: uniphier-system-bus: fix condition of overlap checkKunihiko Hayashi
This patch fixes condition whether the specified address ranges overlap each other. Fixes: 4b7f48d395a7 ("bus: uniphier-system-bus: add UniPhier System Bus driver") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-04-12ARM: uniphier: drop weird sizeof()Masahiro Yamada
My intention was to ioremap a 4-byte register. Coincidentally enough, sizeof(SZ_4) equals to SZ_4, but this code is weird anyway. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-04-12fscrypto: don't let data integrity writebacks fail with ENOMEMJaegeuk Kim
This patch fixes the issue introduced by the ext4 crypto fix in a same manner. For F2FS, however, we flush the pending IOs and wait for a while to acquire free memory. Fixes: c9af28fdd4492 ("ext4 crypto: don't let data integrity writebacks fail with ENOMEM") Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-04-12f2fs: use dget_parent and file_dentry in f2fs_file_openJaegeuk Kim
This patch synced with the below two ext4 crypto fixes together. In 4.6-rc1, f2fs newly introduced accessing f_path.dentry which crashes overlayfs. To fix, now we need to use file_dentry() to access that field. Fixes: c0a37d487884 ("ext4: use file_dentry()") Fixes: 9dd78d8c9a7b ("ext4: use dget_parent() in ext4_file_open()") Cc: Miklos Szeredi <mszeredi@redhat.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-04-12fscrypto: use dget_parent() in fscrypt_d_revalidate()Jaegeuk Kim
This patch updates fscrypto along with the below ext4 crypto change. Fixes: 3d43bcfef5f0 ("ext4 crypto: use dget_parent() in ext4_d_revalidate()") Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-04-13drm/exynos: Use VIDEO_SAMSUNG_S5P_G2D=n as G2D Kconfig dependencyJavier Martinez Canillas
Commit 254d4d111ee1 ("drm/exynos: Add dependency for G2D in Kconfig") made the DRM_EXYNOS_G2D symbol to only be selectable if the s5p-g2d V4L2 driver is not enabled, since both use the same HW IP block. But added the dependency as depends on !VIDEO_SAMSUNG_S5P_G2D which isn't correct since Kconfig expressions are not boolean but tristate. So it will only evaluate to 'n' if VIDEO_SAMSUNG_S5P_G2D=y but it will evaluate to m if VIDEO_SAMSUNG_S5P_G2D=m. This means that both the V4L2 and DRM drivers can be enabled if the former is enabled as a module, which is not what we want. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-12drm/exynos: fix a warning messageDan Carpenter
The "ret = regmap_write()" assignment was missing so this error message is never printed. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-12drm/exynos: mic: fix an error codeDan Carpenter
We accidentally return success instead of a negative error code here. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-12drm/exynos: fimd: fix broken dp_clock controlMarek Szyprowski
Commit 1feafd3afd294b03dbbedb8e8f94e0c4db526f10 ("drm/exynos: add exynos5420 support for fimd") add support for Exynos 5420 SoC, but it broke enabling display clock feature because of incorrect condition check. This patch fixes it, so display is working again on platforms requiring display clock control (i.e. Exynos5250-based SNOW platform). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-12drm/exynos: build fbdev code conditionallyAndrzej Hajda
Fbdev code should be compiled only if CONFIG_DRM_FBDEV_EMULATION option is enabled. The patch fixes exynos-drm code trying to manipulate fbdev data which is not initialized in case CONFIG_DRM_FBDEV_EMULATION is disabled. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-12drm/exynos: fix adjusted_mode pointer in exynos_plane_mode_setAndrzej Hajda
exynos_plane_mode_set should use adjusted_mode from the same atomic state as plane state. Otherwise it will result in incorrect behavior in case crtc mode changes. The patch fixes bug with black console framebuffer in case of command mode panels. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-12drm/exynos: fix error handling in exynos_drm_subdrv_openArnd Bergmann
gcc-6 warns about a pointless loop in exynos_drm_subdrv_open: drivers/gpu/drm/exynos/exynos_drm_core.c: In function 'exynos_drm_subdrv_open': drivers/gpu/drm/exynos/exynos_drm_core.c:104:199: error: self-comparison always evaluates to false [-Werror=tautological-compare] list_for_each_entry_reverse(subdrv, &subdrv->list, list) { Here, the list_for_each_entry_reverse immediately terminates because the subdrv pointer is compared to itself as the loop end condition. If we were to take the current subdrv pointer as the start of the list (as we would do if list_for_each_entry_reverse() was not a macro), we would iterate backwards over the &exynos_drm_subdrv_list anchor, which would be even worse. Instead, we need to use list_for_each_entry_continue_reverse() to go back over each subdrv that was successfully opened until the first entry. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-12nl80211: check netlink protocol in socket release notificationDmitry Ivanov
A non-privileged user can create a netlink socket with the same port_id as used by an existing open nl80211 netlink socket (e.g. as used by a hostapd process) with a different protocol number. Closing this socket will then lead to the notification going to nl80211's socket release notification handler, and possibly cause an action such as removing a virtual interface. Fix this issue by checking that the netlink protocol is NETLINK_GENERIC. Since generic netlink has no notifier chain of its own, we can't fix the problem more generically. Fixes: 026331c4d9b5 ("cfg80211/mac80211: allow registering for and sending action frames") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Ivanov <dima@ubnt.com> [rewrite commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-12ALSA: usb-audio: Skip volume controls triggers hangup on Dell USB DockKailang Yang
This is Dell usb dock audio workaround. It was fixed the master volume keep lower. [Some background: the patch essentially skips the controls of a couple of FU volumes. Although the firmware exposes the dB and the value information via the usb descriptor, changing the values (we set the min volume as default) screws up the device. Although this has been fixed in the newer firmware, the devices are shipped with the old firmware, thus we need the workaround in the driver side. -- tiwai] Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-12mailbox: Stop using ENOSYS for anything other than unimplemented syscallsLee Jones
In accordance with e15f431fe2d5 ("errno.h: Improve ENOSYS's comment") and 91c9afaf97ee ("checkpatch.pl: new instances of ENOSYS are errors") we're converting from the old meaning of: ENOSYS "Function not implemented" to a more standard EINVAL. Reported-by: Seraphin Bonnaffe <seraphin.bonnaffe@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-04-12mailbox: mailbox-test: Prevent memory leakLee Jones
If we set the Signal twice or more, without using it as part of a message, memory will be re-allocated and the pointer over-written. Prevent this potential leak by only allocating memory when there isn't any already. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-04-12mailbox: mailbox-test: Use more consistent format for calling copy_from_user()Lee Jones
While we're at it, ensure copy-to location is NULL'ed in the error path. Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-04-12ASoC: Intel: Skylake: Fix ibs/obs calc for non-integral sampling ratesSubhransu S. Prusty
FW expects sampling rate rounded up to next higher integer value when calculating ibs/obs. For example for 44.1k, it should be rounded up to 45 to calculate ibs/obs. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-11devlink: add missing install of headerstephen hemminger
The new devlink.h in uapi was not being installed by make headers_install Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-11net: vrf: Fix dev refcnt leak due to IPv6 prefix routeDavid Ahern
ifupdown2 found a kernel bug with IPv6 routes and movement from the main table to the VRF table. Sequence of events: Create the interface and add addresses: ip link add dev eth4.105 link eth4 type vlan id 105 ip addr add dev eth4.105 8.105.105.10/24 ip -6 addr add dev eth4.105 2008:105:105::10/64 At this point IPv6 has inserted a prefix route in the main table even though the interface is 'down'. From there the VRF device is created: ip link add dev vrf105 type vrf table 105 ip addr add dev vrf105 9.9.105.10/32 ip -6 addr add dev vrf105 2000:9:105::10/128 ip link set vrf105 up Then the interface is enslaved, while still in the 'down' state: ip link set dev eth4.105 master vrf105 Since the device is down the VRF driver cycling the device does not send the NETDEV_UP and NETDEV_DOWN but rather the NETDEV_CHANGE event which does not flush the routes inserted prior. When the link is brought up ip link set dev eth4.105 up the prefix route is added in the VRF table, but does not remove the route from the main table. Fix by handling the NETDEV_CHANGEUPPER event similar what was implemented for IPv4 in 7f49e7a38b77 ("net: Flush local routes when device changes vrf association") Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-11net: vrf: Fix dst reference countingDavid Ahern
Vivek reported a kernel exception deleting a VRF with an active connection through it. The root cause is that the socket has a cached reference to a dst that is destroyed. Converting the dst_destroy to dst_release and letting proper reference counting kick in does not work as the dst has a reference to the device which needs to be released as well. I talked to Hannes about this at netdev and he pointed out the ipv4 and ipv6 dst handling has dst_ifdown for just this scenario. Rather than continuing with the reinvented dst wheel in VRF just remove it and leverage the ipv4 and ipv6 versions. Fixes: 193125dbd8eb2 ("net: Introduce VRF device driver") Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 00:39:29 +0000