summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-04-19drm/i915/rpl-p: Add PCI IDsMatt Atwood
Adding initial PCI ids for RPL-P. RPL-P behaves identically to ADL-P from i915's point of view. Changes since V1 : - SUBPLATFORM ADL_N and RPL_P clash as both are ADLP based - Matthew R Bspec: 55376 Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com> Signed-off-by: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com> Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com> [mattrope: Corrected comment formatting to match coding style] Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220418062157.2974665-1-tejaskumarx.surendrakumar.upadhyay@intel.com
2022-04-19drm/i915/dg2: Enable Wa_22012727170/Wa_22012727685John Harrison
The above two workaronuds regarding context isolation are implemented by GuC. The KMD just needs to enable them. Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220415224025.3693037-7-umesh.nerlige.ramappa@intel.com
2022-04-19drm/i915/dg2: Enable Wa_14014475959 - RCS / CCS context exitMatthew Brost
There is bug in DG2 where if the CCS contexts switches out while the RCS is running it can cause memory corruption. To workaround this add an atomic to a memory address with a value 1 and semaphore wait to the same address for a value of 0. The GuC firmware is responsible for writing 0 to the memory address when it is safe for the context to switch out. Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220415224025.3693037-6-umesh.nerlige.ramappa@intel.com
2022-04-19drm/i915/guc: Apply Wa_16011777198Vinay Belgaumkar
Enable GuC Wa to reset RCS/CCS before it goes into RC6. Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220415224025.3693037-5-umesh.nerlige.ramappa@intel.com
2022-04-19drm/i915/guc: Enable GuC based workarounds for DG2John Harrison
There are some workarounds for DG2 that are implemented in the GuC firmware. However, the KMD is required to enable these by setting the appropriate flag as GuC does not know what platform it is running on. Wa_16011759253 Wa_14012630569 Wa_14013746162 Signed-off-by: John Harrison <John.C.Harrison@Intel.com> CC: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220415224025.3693037-4-umesh.nerlige.ramappa@intel.com
2022-04-19drm/i915/guc: Enable Wa_22011802037 for gen12 GuC based platformsUmesh Nerlige Ramappa
Initiating a reset when the command streamer is not idle or in the middle of executing an MI_FORCE_WAKE can result in a hang. Multiple command streamers can be part of a single reset domain, so resetting one would mean resetting all command streamers in that domain. To workaround this, before initiating a reset, ensure that all command streamers within that reset domain are either IDLE or are not executing a MI_FORCE_WAKE. Enable GuC PRE_PARSER WA bit so that GuC follows the WA sequence when initiating engine-resets. For gt-resets, ensure that i915 applies the WA sequence. Opens to address in future patches: - The part of the WA to wait for pending forcewakes is also applicable to execlists backend. - The WA also needs to be applied for gen11 Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220415224025.3693037-3-umesh.nerlige.ramappa@intel.com
2022-04-19drm/i915: Add Wa_22011802037 force cs haltTilak Tangudu
Prior to doing a reset, SW must ensure command streamer is stopped, as a workaround, to eliminate a race condition in GPM flow. Setting both the ring stop and prefetch disable bits, will cause the command streamer to halt. Signed-off-by: Tilak Tangudu <tilak.tangudu@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220415224025.3693037-2-umesh.nerlige.ramappa@intel.com
2022-04-19drm: bridge: icn6211: Add DSI lane count DT property parsingMarek Vasut
The driver currently hard-codes DSI lane count to two, however the chip is capable of operating in 1..4 DSI lanes mode. Parse 'data-lanes' DT property and program the result into DSI_CTRL register. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220407185617.179573-2-marex@denx.de
2022-04-19dt-bindings: display: bridge: icn6211: Document DSI data-lanes propertyMarek Vasut
It is necessary to specify the number of connected/used DSI data lanes when using the DSI input port of this bridge. Document the 'data-lanes' property of the DSI input port. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Rob Herring <robh+dt@kernel.org> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: devicetree@vger.kernel.org To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220407185617.179573-1-marex@denx.de
2022-04-19drm/bridge: anx7625: Use uint8 for lane-swing arraysNícolas F. R. A. Prado
As defined in the anx7625 dt-binding, the analogix,lane0-swing and analogix,lane1-swing properties are uint8 arrays. Yet, the driver was reading the array as if it were of uint32 and masking to 8-bit before writing to the registers. This means that a devicetree written in accordance to the dt-binding would have its values incorrectly parsed. Fix the issue by reading the array as uint8 and storing them as uint8 internally, so that we can also drop the masking when writing the registers. Fixes: fd0310b6fe7d ("drm/bridge: anx7625: add MIPI DPI input feature") Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220408013034.673418-1-nfraprado@collabora.com
2022-04-19drm: bridge: dw_hdmi: Audio: Add General Parallel Audio (GPA) driverSandor Yu
General Parallel Audio (GPA) interface is one of the supported audio interface for synopsys HDMI module, which has verified for i.MX8MPlus platform. This is initial version for GPA. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Sandor Yu <Sandor.yu@nxp.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/f21ba3e8c4d9d028ac74c6f3c588ddbffe739399.1649989179.git.Sandor.yu@nxp.com
2022-04-19drm: bridge: dw_hdmi: add reset function for PHY GEN1Sandor Yu
PHY reset register(MC_PHYRSTZ) active high reset control for PHY GEN2, and active low reset control for PHY GEN1. Rename function dw_hdmi_phy_reset to dw_hdmi_phy_gen2_reset. Add dw_hdmi_phy_gen1_reset function for PHY GEN1. Signed-off-by: Sandor Yu <Sandor.yu@nxp.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/e0b3be2d63fe3e95246fb8b8b0dcd57415b29e04.1649989179.git.Sandor.yu@nxp.com
2022-04-19drm: bridge: dw_hdmi: Enable GCP only for Deep ColorSandor Yu
HDMI1.4b specification section 6.5.3: Source shall only send GCPs with non-zero CD to sinks that indicate support for Deep Color. DW HDMI GCP default enabled, but only transmit CD and do not handle AVMUTE, PP norDefault_Phase (yet). Disable Auto GCP when 24-bit color for sinks that not support Deep Color. Signed-off-by: Sandor Yu <Sandor.yu@nxp.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/78fa41e4fb3d3d53354034bc221fcf870dbac617.1649989179.git.Sandor.yu@nxp.com
2022-04-19drm: bridge: dw_hdmi: default enable workaround to clear the overflowSandor Yu
i.MX8MPlus (v2.13a) has verified need the workaround to clear the overflow with one iteration. Only i.MX6Q(v1.30a) need the workaround with 4 iterations, the others versions later than v1.3a have been identified as needing the workaround with a single iteration. Default enable the workaround with one iteration for all versions later than v1.30a. Signed-off-by: Sandor Yu <Sandor.yu@nxp.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/561951005a85574dcdd108e5d6a3a87df930ea3d.1649989179.git.Sandor.yu@nxp.com
2022-04-19drm: bridge: panel: Register connector if DRM device is already registeredMarek Szyprowski
If panel_bridge_attach() happens after DRM device registration, the created connector will not be registered by the DRM core anymore. Fix this by registering it explicitly in such case. This fixes the following issue observed on Samsung Exynos4210-based Trats board with a DSI panel (the panel driver is registered after the Exynos DRM component device is bound): $ ./modetest -c -Mexynos could not get connector 56: No such file or directory Segmentation fault While touching this, move the connector reset() call also under the DRM device registered check, because otherwise it is not really needed. Fixes: 934aef885f9d ("drm: bridge: panel: Reset the connector state pointer") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220419091422.4255-1-m.szyprowski@samsung.com
2022-04-19drm: bridge: adv7511: Enable DRM_BRIDGE_OP_HPD based on HPD interruptBiju Das
Connector detection using poll method won't work in case of bridge attached to the encoder with the flag DRM_BRIDGE_ATTACH_NO_CONNECTOR, as the code defaults to HPD. Enable DRM_BRIDGE_OP_HPD based on HPD interrupt availability, so that it will fall back to polling, if HPD is not available. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220419142453.48839-1-biju.das.jz@bp.renesas.com
2022-04-19drm/bridge: lt9211: Add Lontium LT9211 bridge driverMarek Vasut
Add driver for Lontium LT9211 Single/Dual-Link DSI/LVDS or Single DPI to Single-link/Dual-Link DSI/LVDS or Single DPI bridge. This chip is highly capable at converting formats, but sadly it is also highly undocumented. This driver is written without any documentation from Lontium and based only on shreds of information available in various obscure example codes, hence long runs of unknown register patches and lengthy delays in various places. Whichever register meaning could be divined from its behavior has at least a comment around it. Currently the only mode tested is Single-link DSI to Single-link LVDS. Dual-link LVDS might work as well, the register programming is in place, but is untested. Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220419143958.94873-2-marex@denx.de
2022-04-19dt-bindings: display: bridge: lt9211: Add Lontium LT9211 bridge driverMarek Vasut
Add bindings for Lontium LT9211 Single/Dual-Link DSI/LVDS or Single DPI to Single-link/Dual-Link DSI/LVDS or Single DPI bridge. This chip is highly capable at converting formats, but sadly it is also highly undocumented. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Rob Herring <robh+dt@kernel.org> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: devicetree@vger.kernel.org To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220419143958.94873-1-marex@denx.de
2022-04-19drm/bridge: anx7625: Fill in empty ELD when no connectorHsin-Yi Wang
Speaker may share I2S with DP and .get_eld callback will be called when speaker is playing. When HDMI wans't connected, the connector will be null. Instead of return an error, fill in empty ELD. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Xin Ji <xji@analogixsemi.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220414090003.1806535-1-hsinyi@chromium.org
2022-04-19drm/i915/display/psr: Clear more PSR state during disableJosé Roberto de Souza
After commit 805f04d42a6b ("drm/i915/display/psr: Use continuos full frame to handle frontbuffer invalidations") was merged we started to get some drm_WARN_ON(&dev_priv->drm, !(tmp & PSR2_MAN_TRK_CTL_ENABLE)) in tests that are executed in pipe B. This is probably due psr2_sel_fetch_cff_enabled being left set during PSR disable in the pipe A, so the PSR2_MAN_TRK_CTL write in intel_psr2_program_trans_man_trk_ctl() is skipped in pipe B and then we get the warning when actually enabling PSR after planes programing. We don't get such warnings when running tests in pipe A because PSR2_MAN_TRK_CTL is only cleared when enabling PSR2 with hardware tracking. Was not able to reproduce this issue but cleaning the PSR state disable will not harm anything at all. Fixes: 805f04d42a6b ("drm/i915/display/psr: Use continuos full frame to handle frontbuffer invalidations") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5634 Cc: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220414151118.21980-2-jose.souza@intel.com
2022-04-19drm/i915/display/psr: Unset enable_psr2_sel_fetch if other checks in ↵José Roberto de Souza
intel_psr2_config_valid() fails If any of the PSR2 checks after intel_psr2_sel_fetch_config_valid() fails, enable_psr2_sel_fetch will be kept enabled causing problems in the functions that only checks for it and not for has_psr2. So here moving the check that do not depend on enable_psr2_sel_fetch and for the remaning ones jumping to a section that unset enable_psr2_sel_fetch in case of failure to support PSR2. Fixes: 6e43e276b8c9 ("drm/i915: Initial implementation of PSR2 selective fetch") Cc: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220414151118.21980-1-jose.souza@intel.com
2022-04-19drm/tidss: Soft Reset DISPC on startupDevarsh Thakkar
Soft reset the display subsystem controller on startup and wait for the reset to complete. This helps the scenario where display was already in use by some other core before the linux was booted. Signed-off-by: Devarsh Thakkar <devarsht@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220314113739.18000-1-devarsht@ti.com
2022-04-18Merge drm/drm-next into drm-misc-nextPaul Cercueil
drm/drm-next has a build fix for the NewVision NV3052C panel (drivers/gpu/drm/panel/panel-newvision-nv3052c.c), which needs to be merged back to drm-misc-next, as it was failing to build there. Signed-off-by: Paul Cercueil <paul@crapouillou.net>
2022-04-18drm/nouveau/gr/gf100-: change gf108_gr_fwif from global to staticTom Rix
Smatch reports this issue gf108.c:147:1: warning: symbol 'gf108_gr_fwif' was not declared. Should it be static? gf108_gr_fwif is only used in gf108.c. Single file variables should not be global so change gf108_gr_fwif's storage-class specifier to static. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220418152810.3280502-1-trix@redhat.com
2022-04-18drm/nouveau: change base917c_format from global to staticTom Rix
Smatch reports this issue base917c.c:26:1: warning: symbol 'base917c_format' was not declared. Should it be static? base917c_format is only used in base917.c. Single file variables should not be global so change base917c_format's storage-class specifier to static. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220418141842.296386-1-trix@redhat.com
2022-04-15drm/i915/hwconfig: Add DG2 supportRodrigo Vivi
v2: * Jordan: Drop stepping/skew checking as suggested by John. Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Tested-by: Jordan Justen <jordan.l.justen@intel.com> Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220331231737.315957-1-jordan.l.justen@intel.com
2022-04-15drm/i915: Don't show engine information in fdinfo with GuC submissionAshutosh Dixit
At present i915 does not fetch busyness information from GuC, resulting in incorrect busyness values in fdinfo. Because engine information is coupled with busyness in fdinfo, skip showing client engine information in fdinfo with GuC submission till fetching busyness is supported in the i915 GuC submission backend. v2 (Daniele): Make commit title and description more precise Add FIXME with brief description at code change s/intel_guc_submission_is_used/intel_uc_uses_guc_submission/ v3 (Daniele): Drop FIXME in comment Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/5564 Fixes: 055634e4b62f ("drm/i915: Expose client engine utilisation via fdinfo") Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b614c2c61a954de06fbe2c3a7c70d3a91804407e.1649982207.git.ashutosh.dixit@intel.com
2022-04-15drm/i915/guc/slpc: Use i915_probe_error instead of drm_errVinay Belgaumkar
This will ensure we don't have false positives when we run error injection tests. Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220412224852.21501-1-vinay.belgaumkar@intel.com
2022-04-15drm/i915/uapi: Add DRM_I915_QUERY_GEOMETRY_SUBSLICESMatt Atwood
Newer platforms have DSS that aren't necessarily available for both geometry and compute, two queries will need to exist. This introduces the first, when passing a valid engine class and engine instance in the flags returns a topology describing geometry. Based on past discussion, we currently only support this new query item on Xe_HP and beyond; earlier platforms do not need to worry about geometry and compute pipelines having access to different topology and should continue to use the existing topology query. v2: fix white space errors v3: change flags from hosting 2 8 bit numbers to holding a i915_engine_class_instance struct v4: add error if non rcs engine passed. v5 (by MattR): - Improve kerneldoc and cross references to related structs/enums. (Daniel) - Clarify that geometry query is only supported on render engines (Francisco) - Clarify that the new query is only supported on Xe_HP+. - Fix checkpatch warnings. Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Francisco Jerez <currojerez@riseup.net> UMD (mesa): https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14143 Testcase: igt@i915_query@test-query-geometry-subslices Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Francisco Jerez <currojerez@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20220414192230.749771-4-matthew.d.roper@intel.com
2022-04-15drm/i915/doc: Link query items to their uapi structsMatt Roper
Document the possible options for drm_i915_query_item.query_id with links to the corresponding uapi structures. Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Francisco Jerez <currojerez@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20220414192230.749771-3-matthew.d.roper@intel.com
2022-04-15drm/i915/doc: Convert perf UAPI comments to kerneldocMatt Roper
Convert the comments for drm_i915_query_perf_config and drm_i915_perf_oa_config to kerneldoc so that they will show up in the generated documentation. Also correct a couple places that referred to query_id when they actually meant to refer to query_item.flags. Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Francisco Jerez <currojerez@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20220414192230.749771-2-matthew.d.roper@intel.com
2022-04-15drm/i915/doc: Convert drm_i915_query_topology_info comment to kerneldocMatt Roper
This structure has a great comment describing the fields, but it's not currently in kerneldoc form and does not show up in the generated documentation. Let's fix that and also clarify the description of what "subslice" refers to on gen12 platforms and beyond and that "slice" is no longer meaningful on Xe_HP and beyond. Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Francisco Jerez <currojerez@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20220414192230.749771-1-matthew.d.roper@intel.com
2022-04-14drm/i915/guc: Update to GuC version 70.1.1John Harrison
The latest GuC firmware drops the context descriptor pool in favour of passing all creation data in the create H2G. It also greatly simplifies the work queue and removes the process descriptor used for multi-LRC submission. So, remove all mention of LRC and process descriptors and update the registration code accordingly. Unfortunately, the new API also removes the ability to set default values for the scheduling policies at context registration time. Instead, a follow up H2G must be sent. The individual scheduling policy update H2G commands are also dropped in favour of a single KLV based H2G. So, change the update wrappers accordingly and call this during context registration.. Of course, this second H2G per registration might fail due to being backed up. The registration code has a complicated state machine to cope with the actual registration call failing. However, if that works then there is no support for unwinding if a further call should fail. Unwinding would require sending a H2G to de-register - but that can't be done because the CTB is already backed up. So instead, add a new flag to say whether the context has a pending policy update. This is set if the policy H2G fails at registration time. The submission code checks for this flag and retries the policy update if set. If that call fails, the submission path early exists with a retry error. This is something that is already supported for other reasons. Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220412225955.1802543-2-John.C.Harrison@Intel.com
2022-04-14Revert "video: fbdev: fbmem: fix pointer reference to null device field"Helge Deller
This reverts commit d6cd978f7e6b6f6895f8d0c4ce6e5d2c8e979afe. It has been solved differently already. Signed-off-by: Helge Deller <deller@gmx.de> Acked-by: Paul Menzel <pmenzel@molgen.mpg.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220210065824.368355-1-zhouzhouyi@gmail.com
2022-04-14video: fbdev: fbmem: fix pointer reference to null device fieldZhouyi Zhou
In function do_remove_conflicting_framebuffers, if device is NULL, there will be null pointer reference. The patch add a check to the if expression. Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com> Acked-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Helge Deller <deller@gmx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220210065824.368355-1-zhouzhouyi@gmail.com
2022-04-14fbcon: replace snprintf in show functions with sysfs_emitYang Guang
Use sysfs_emit instead of scnprintf or sprintf. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Yang Guang <yang.guang5@zte.com.cn> Signed-off-by: Helge Deller <deller@gmx.de> Link: https://patchwork.freedesktop.org/patch/msgid/0cb7ca73d9cd7162988a22a24cd18bbcd3d8bb27.1638156341.git.yang.guang5@zte.com.cn
2022-04-14drm/dp: Factor out a function to probe a DPCD addressImre Deak
Factor out from drm_dp_dpcd_read() a function to probe a DPCD address with a 1-byte read access. This will be needed by the next patch doing a read from an LTTPR address, which must happen without the preceding wake-up read in drm_dp_dpcd_read(). While at it add tracing for the 1 byte read even if the read was successful. v2: Add a probe function instead of exporting drm_dp_dpcd_access(). (Jani) v3: Add tracing for the 1-byte read even if the read was successful. (Khaled) Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Khaled Almahallawy <khaled.almahallawy@intel.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220411132539.984647-1-imre.deak@intel.com
2022-04-14drm/edid: add EDID block count and size helpersJani Nikula
Add some helpers to figure out the EDID extension block count, block count, size, pointers to blocks. Unfortunately, we'll need to cast away the const in a few places where we actually need to access the data. v3: fix (!edid_extension_block_count(edid) == 0) (kernel test robot) v2: fix s/j/i/ introduced in a rebase Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/dc7b0850293d837439fb3914c8a9d81e39018b4b.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: add single point of return to drm_do_get_edid()Jani Nikula
This will be useful in the future. Use fail label for fail exit. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/8e564e9415baa4dc9dc3127e4200b2618a8a3ba0.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: drop extra local varJani Nikula
We don't need override as a variable for anything. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/4d249173b34758e1d6c4a74eb98518d180f0a8ae.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: convert extension block read to EDID block read helperJani Nikula
Use the EDID block read helper also for extension block reads, making edid_block_read() the only place with the read retry logic. Note: We observe that drm_do_get_edid() does not use invalid extension blocks to flag the EDID as corrupt. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/a6328b898db40235b85ad4635374bc0768b5a970.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: use EDID block read helper in drm_do_get_edid()Jani Nikula
Convert drm_do_get_edit() from the base block read helper to the generic block read helper. There's quite a bit going on here, as the corrupt and null EDID information is moved back to the caller. As we see, they were not all that clear to begin with, and this change underlines that. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3bcf98453770757ee93386da0cfbc6552d42a312.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: abstract an EDID block read helperJani Nikula
We have an abstraction for the EDID base block read, yet duplicating the retries and error handling for extension block reads. Introduce a more generic EDID block read helper. Switch to the helper piecemeal, starting with drm_edid_get_panel_id(), which doesn't need or have access to the connector anyway. The subtle change is switching from drm_edid_block_valid() to edid_block_check(). We also status print once, not for every attempt. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/47560f7530e4a7b32b56cb9038178244fe30a4af.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: add typedef for block read functionJani Nikula
Make the callback a bit easier on the eye. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/10b8721bb7ea8c7df1fd0c1d97c5d446905abbf4.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: pass struct edid to connector_bad_edid()Jani Nikula
Avoid casting here and there, and make it const. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/4f9fdc961dfd9b36f4649e8ba57d05e43375fc92.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: add a helper to log dump an EDID blockJani Nikula
Unify debug log dumping. There's duplication in the error paths for EDID block validity checks, but this should be neglible. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b56f120a26f54b0defc43faa6d49e26f072d4d8f.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: refactor EDID block status printingJani Nikula
Split out a function to log EDID block status. The printouts get changed slightly. Unfortunately, not all users will have struct drm_device available, so we convert to pr_* debug logging instead of drm device based logging. v2: Complain more loudly about unknown status codes (Ville) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/98d12db95e55e2e18548822078ec3b16ae006732.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: have edid_block_check() detect blocks that are all zeroJani Nikula
We have the check function, have it also detect blocks that are all zero instead of leaving that to callers. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f9ad302e6b7dbcd1dff98d94ec5500ce27bebe10.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: convert edid_is_zero() to edid_block_is_zero() for blocksJani Nikula
As edid_is_zero() is only ever used on EDID blocks, convert it to edid_block_is_zero() with implicit block size. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/5cc9387e22b4a61243df4053d1ebcc14b0007dc8.1649685475.git.jani.nikula@intel.com
2022-04-14drm/i915/migrate: Evict and restore the flatccs capable lmem objRamalingam C
When we are swapping out the local memory obj on flat-ccs capable platform, we need to capture the ccs data too along with main meory and we need to restore it when we are swapping in the content. When lmem object is swapped into a smem obj, smem obj will have the extra pages required to hold the ccs data corresponding to the lmem main memory. So main memory of lmem will be copied into the initial pages of the smem and then ccs data corresponding to the main memory will be copied to the subsequent pages of smem. ccs data is 1/256 of lmem size. Swapin happens exactly in reverse order. First main memory of lmem is restored from the smem's initial pages and the ccs data will be restored from the subsequent pages of smem. Extracting and restoring the CCS data is done through a special cmd called XY_CTRL_SURF_COPY_BLT v2: Fixing the ccs handling v3: Handle the ccs data at same loop as main memory [Thomas] v4: changes for emit_copy_ccs v5: handle non-flat-ccs scenario Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220405150840.29351-10-ramalingam.c@intel.com
generated by cgit (git 2.34.1) at 2025-09-14 15:47:13 +0000