summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-10-21drm/kmb: Disable change of plane parametersEdmund Dea
Due to HW limitations, KMB cannot change height, width, or pixel format after initial plane configuration. v2: removed memset disp_cfg as it is already zero. Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display") Signed-off-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-4-anitha.chrisanthus@intel.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-21drm/kmb: Remove clearing DPHY regsEdmund Dea
Don't clear the shared DPHY registers common to MIPI Rx and MIPI Tx during DSI initialization since this was causing MIPI Rx reset. Rest of the writes are bitwise, so will not affect Mipi Rx side. Fixes: 98521f4d4b4c ("drm/kmb: Mipi DSI part of the display driver") Signed-off-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-3-anitha.chrisanthus@intel.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-21drm/kmb: Limit supported mode to 1080pAnitha Chrisanthus
KMB only supports single resolution(1080p), this commit checks for 1920x1080x60 or 1920x1080x59 in crtc_mode_valid. Also, modes with vfp < 4 are not supported in KMB display. This change prunes display modes with vfp < 4. v2: added vfp check Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display") Co-developed-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link:https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-2-anitha.chrisanthus@intel.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-21drm/kmb: Work around for higher system clockAnitha Chrisanthus
Use a different value for system clock offset in the ppl/llp ratio calculations for clocks higher than 500 Mhz. Fixes: 98521f4d4b4c ("drm/kmb: Mipi DSI part of the display driver") Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-1-anitha.chrisanthus@intel.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-21drm/panel: ilitek-ili9881c: Fix sync for Feixin K101-IM2BYL02 panelDan Johansen
This adjusts sync values according to the datasheet Fixes: 1c243751c095 ("drm/panel: ilitek-ili9881c: add support for Feixin K101-IM2BYL02 panel") Co-developed-by: Marius Gripsgard <marius@ubports.com> Signed-off-by: Dan Johansen <strit@manjaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210818214818.298089-1-strit@manjaro.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-21drm: mxsfb: Fix NULL pointer dereference crash on unloadMarek Vasut
The mxsfb->crtc.funcs may already be NULL when unloading the driver, in which case calling mxsfb_irq_disable() via drm_irq_uninstall() from mxsfb_unload() leads to NULL pointer dereference. Since all we care about is masking the IRQ and mxsfb->base is still valid, just use that to clear and mask the IRQ. Fixes: ae1ed00932819 ("drm: mxsfb: Stop using DRM simple display pipeline helper") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Abrecht <public@danielabrecht.ch> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stefan Agner <stefan@agner.ch> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211016210446.171616-1-marex@denx.de Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-21compiler-gcc.h: Define __SANITIZE_ADDRESS__ under hwaddress sanitizerKees Cook
When Clang is using the hwaddress sanitizer, it sets __SANITIZE_ADDRESS__ explicitly: #if __has_feature(address_sanitizer) || __has_feature(hwaddress_sanitizer) /* Emulate GCC's __SANITIZE_ADDRESS__ flag */ #define __SANITIZE_ADDRESS__ #endif Once hwaddress sanitizer was added to GCC, however, a separate define was created, __SANITIZE_HWADDRESS__. The kernel is expecting to find __SANITIZE_ADDRESS__ in either case, though, and the existing string macros break on supported architectures: #if (defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS)) && \ !defined(__SANITIZE_ADDRESS__) where as other architectures (like arm32) have no idea about hwaddress sanitizer and just check for __SANITIZE_ADDRESS__: #if defined(CONFIG_KASAN) && !defined(__SANITIZE_ADDRESS__) This would lead to compiler foritfy self-test warnings when building with CONFIG_KASAN_SW_TAGS=y: warning: unsafe memmove() usage lacked '__read_overflow2' symbol in lib/test_fortify/read_overflow2-memmove.c warning: unsafe memcpy() usage lacked '__write_overflow' symbol in lib/test_fortify/write_overflow-memcpy.c ... Sort this out by also defining __SANITIZE_ADDRESS__ in GCC under the hwaddress sanitizer. Suggested-by: Arnd Bergmann <arnd@arndb.de> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Will Deacon <will@kernel.org> Cc: Arvind Sankar <nivedita@alum.mit.edu> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: llvm@lists.linux.dev Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Miguel Ojeda <ojeda@kernel.org> Reviewed-by: Marco Elver <elver@google.com> Link: https://lore.kernel.org/r/20211020200039.170424-1-keescook@chromium.org
2021-10-21fuse: clean up error exits in fuse_fill_super()Miklos Szeredi
Instead of "goto err", return error directly, since there's no error cleanup to do now. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-21fuse: always initialize sb->s_fs_infoMiklos Szeredi
Syzkaller reports a null pointer dereference in fuse_test_super() that is caused by sb->s_fs_info being NULL. This is due to the fact that fuse_fill_super() is initializing s_fs_info, which is too late, it's already on the fs_supers list. The initialization needs to be done in sget_fc() with the sb_lock held. Move allocation of fuse_mount and fuse_conn from fuse_fill_super() into fuse_get_tree(). After this ->kill_sb() will always be called with non-NULL ->s_fs_info, hence fuse_mount_destroy() can drop the test for non-NULL "fm". Reported-by: syzbot+74a15f02ccb51f398601@syzkaller.appspotmail.com Fixes: 5d5b74aa9c76 ("fuse: allow sharing existing sb") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-21fuse: clean up fuse_mount destructionMiklos Szeredi
1. call fuse_mount_destroy() for open coded variants 2. before deactivate_locked_super() don't need fuse_mount destruction since that will now be done (if ->s_fs_info is not cleared) 3. rearrange fuse_mount setup in fuse_get_tree_submount() so that the regular pattern can be used Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-21fuse: get rid of fuse_put_super()Miklos Szeredi
The ->put_super callback is called from generic_shutdown_super() in case of a fully initialized sb. This is called from kill_***_super(), which is called from ->kill_sb instances. Fuse uses ->put_super to destroy the fs specific fuse_mount and drop the reference to the fuse_conn, while it does the same on each error case during sb setup. This patch moves the destruction from fuse_put_super() to fuse_mount_destroy(), called at the end of all ->kill_sb instances. A follup patch will clean up the error paths. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-21fuse: check s_root when destroying sbMiklos Szeredi
Checking "fm" works because currently sb->s_fs_info is cleared on error paths; however, sb->s_root is what generic_shutdown_super() checks to determine whether the sb was fully initialized or not. This change will allow cleanup of sb setup error paths. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-10-21KVM: nVMX: promptly process interrupts delivered while in guest modePaolo Bonzini
Since commit c300ab9f08df ("KVM: x86: Replace late check_nested_events() hack with more precise fix") there is no longer the certainty that check_nested_events() tries to inject an external interrupt vmexit to L1 on every call to vcpu_enter_guest. Therefore, even in that case we need to set KVM_REQ_EVENT. This ensures that inject_pending_event() is called, and from there kvm_check_nested_events(). Fixes: c300ab9f08df ("KVM: x86: Replace late check_nested_events() hack with more precise fix") Cc: stable@vger.kernel.org Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-21KVM: x86: check for interrupts before deciding whether to exit the fast pathPaolo Bonzini
The kvm_x86_sync_pir_to_irr callback can sometimes set KVM_REQ_EVENT. If that happens exactly at the time that an exit is handled as EXIT_FASTPATH_REENTER_GUEST, vcpu_enter_guest will go incorrectly through the loop that calls kvm_x86_run, instead of processing the request promptly. Fixes: 379a3c8ee444 ("KVM: VMX: Optimize posted-interrupt delivery for timer fastpath") Cc: stable@vger.kernel.org Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-21x86/process: Move arch_thread_struct_whitelist() out of lineThomas Gleixner
In preparation for dynamically enabled FPU features move the function out of line as the goal is to expose less and not more information. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20211013145322.869001791@linutronix.de
2021-10-21x86/fpu: Do not leak fpstate pointer on forkThomas Gleixner
If fork fails early then the copied task struct would carry the fpstate pointer of the parent task. Not a problem right now, but later when dynamically allocated buffers are available, keeping the pointer might result in freeing the parent's buffer. Set it to NULL which prevents that. If fork reaches clone_thread(), the pointer will be correctly set to the new task context. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20211013145322.817101108@linutronix.de
2021-10-20scsi: ufs: ufs-exynos: Correct timeout value setting registersChanho Park
PA_PWRMODEUSERDATA0 -> DL_FC0PROTTIMEOUTVAL PA_PWRMODEUSERDATA1 -> DL_TC0REPLAYTIMEOUTVAL PA_PWRMODEUSERDATA2 -> DL_AFC0REQTIMEOUTVAL Link: https://lore.kernel.org/r/20211018062841.18226-1-chanho61.park@samsung.com Fixes: a967ddb22d94 ("scsi: ufs: ufs-exynos: Apply vendor-specific values for three timeouts") Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Kiwoong Kim <kwmad.kim@samsung.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-20scsi: ibmvfc: Fix up duplicate response detectionBrian King
Commit a264cf5e81c7 ("scsi: ibmvfc: Fix command state accounting and stale response detection") introduced a regression in detecting duplicate responses. This was observed in test where a command was sent to the VIOS and completed before ibmvfc_send_event() set the active flag to 1, which resulted in the atomic_dec_if_positive() call in ibmvfc_handle_crq() thinking this was a duplicate response, which resulted in scsi_done() not getting called, so we then hit a SCSI command timeout for this command once the timeout expires. This simply ensures the active flag gets set prior to making the hcall to send the command to the VIOS, in order to close this window. Link: https://lore.kernel.org/r/20211019152129.16558-1-brking@linux.vnet.ibm.com Fixes: a264cf5e81c7 ("scsi: ibmvfc: Fix command state accounting and stale response detection") Cc: stable@vger.kernel.org Acked-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-20autofs: fix wait name hash calculation in autofs_wait()Ian Kent
There's a mistake in commit 2be7828c9fefc ("get rid of autofs_getpath()") that affects kernels from v5.13.0, basically missed because of me not fully testing the change for Al. The problem is that the hash calculation for the wait name qstr hasn't been updated to account for the change to use dentry_path_raw(). This prevents the correct matching an existing wait resulting in multiple notifications being sent to the daemon for the same mount which must not occur. The problem wasn't discovered earlier because it only occurs when multiple processes trigger a request for the same mount concurrently so it only shows up in more aggressive testing. Fixes: 2be7828c9fefc ("get rid of autofs_getpath()") Cc: stable@vger.kernel.org Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2021-10-20dmaengine: pxa_dma: Prefer struct_size over open coded arithmeticLen Baker
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. So, use the struct_size() helper to do the arithmetic instead of the argument "size + count * size" in the kzalloc() function. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments Signed-off-by: Len Baker <len.baker@gmx.com> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-10-20KVM: PPC: Replace zero-length array with flexible array memberLen Baker
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use "flexible array members" [1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. Also, make use of the struct_size() helper in kzalloc(). [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Len Baker <len.baker@gmx.com> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-10-20aio: Prefer struct_size over open coded arithmeticLen Baker
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. So, use the struct_size() helper to do the arithmetic instead of the argument "size + size * count" in the kzalloc() function. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments Signed-off-by: Len Baker <len.baker@gmx.com> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-10-20writeback: prefer struct_size over open coded arithmeticLen Baker
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. In this case these are not actually dynamic sizes: all the operands involved in the calculation are constant values. However it is better to refactor them anyway, just to keep the open-coded math idiom out of code. So, use the struct_size() helper to do the arithmetic instead of the argument "size + count * size" in the kzalloc() functions. This code was detected with the help of Coccinelle and audited and fixed manually. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments Signed-off-by: Len Baker <len.baker@gmx.com> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-10-20xfs: Use kvcalloc() instead of kvzalloc()Gustavo A. R. Silva
Use 2-factor argument multiplication form kvcalloc() instead of kvzalloc(). Link: https://github.com/KSPP/linux/issues/162 Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-10-20x86/fpu: Remove fpu::stateThomas Gleixner
All users converted. Remove it along with the sanity checks. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20211013145322.765063318@linutronix.de
2021-10-20x86/math-emu: Convert to fpstateThomas Gleixner
Convert math emulation code to the new register storage mechanism in preparation for dynamically sized buffers. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20211013145322.711347464@linutronix.de
2021-10-20x86/fpu/core: Convert to fpstateThomas Gleixner
Convert the rest of the core code to the new register storage mechanism in preparation for dynamically sized buffers. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20211013145322.659456185@linutronix.de
2021-10-20x86/fpu/signal: Convert to fpstateThomas Gleixner
Convert signal related code to the new register storage mechanism in preparation for dynamically sized buffers. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20211013145322.607370221@linutronix.de
2021-10-20x86/fpu/regset: Convert to fpstateThomas Gleixner
Convert regset related code to the new register storage mechanism in preparation for dynamically sized buffers. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20211013145322.555239736@linutronix.de
2021-10-20x86/fpu: Convert tracing to fpstateThomas Gleixner
Convert FPU tracing code to the new register storage mechanism in preparation for dynamically sized buffers. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20211013145322.503327333@linutronix.de
2021-10-20x86/KVM: Convert to fpstateThomas Gleixner
Convert KVM code to the new register storage mechanism in preparation for dynamically sized buffers. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: kvm@vger.kernel.org Link: https://lkml.kernel.org/r/20211013145322.451439983@linutronix.de
2021-10-20x86/fpu: Replace KVMs xstate component clearingThomas Gleixner
In order to prepare for the support of dynamically enabled FPU features, move the clearing of xstate components to the FPU core code. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: kvm@vger.kernel.org Link: https://lkml.kernel.org/r/20211013145322.399567049@linutronix.de
2021-10-20x86/fpu: Convert restore_fpregs_from_fpstate() to struct fpstateThomas Gleixner
Convert restore_fpregs_from_fpstate() and related code to the new register storage mechanism in preparation for dynamically sized buffers. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20211013145322.347395546@linutronix.de
2021-10-20x86/fpu: Convert fpstate_init() to struct fpstateThomas Gleixner
Convert fpstate_init() and related code to the new register storage mechanism in preparation for dynamically sized buffers. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20211013145322.292157401@linutronix.de
2021-10-20x86/fpu: Provide struct fpstateThomas Gleixner
New xfeatures will not longer be automatically stored in the regular XSAVE buffer in thread_struct::fpu. The kernel will provide the default sized buffer for storing the regular features up to AVX512 in thread_struct::fpu and if a task requests to use one of the new features then the register storage has to be extended. The state will be accessed via a pointer in thread_struct::fpu which defaults to the builtin storage and can be switched when extended storage is required. To avoid conditionals all over the code, create a new container for the register storage which will gain other information, e.g. size, feature masks etc., later. For now it just contains the register storage, which gives it exactly the same layout as the exiting fpu::state. Stick fpu::state and the new fpu::__fpstate into an anonymous union and initialize the pointer. Add build time checks to validate that both are at the same place and have the same size. This allows step by step conversion of all users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20211013145322.234458659@linutronix.de
2021-10-20Merge tag 'ceph-for-5.15-rc7' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fixes from Ilya Dryomov: "Two important filesystem fixes, marked for stable. The blocklisted superblocks issue was particularly annoying because for unexperienced users it essentially exacted a reboot to establish a new functional mount in that scenario" * tag 'ceph-for-5.15-rc7' of git://github.com/ceph/ceph-client: ceph: fix handling of "meta" errors ceph: skip existing superblocks that are blocklisted or shut down when mounting
2021-10-20x86/fpu: Replace KVMs home brewed FPU copy to userThomas Gleixner
Similar to the copy from user function the FPU core has this already implemented with all bells and whistles. Get rid of the duplicated code and use the core functionality. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: kvm@vger.kernel.org Link: https://lkml.kernel.org/r/20211015011539.244101845@linutronix.de
2021-10-20Merge tag 'dma-mapping-5.15-2' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping fixes from Christoph Hellwig: - fix more dma-debug fallout (Gerald Schaefer, Hamza Mahfooz) - fix a kerneldoc warning (Logan Gunthorpe) * tag 'dma-mapping-5.15-2' of git://git.infradead.org/users/hch/dma-mapping: dma-debug: teach add_dma_entry() about DMA_ATTR_SKIP_CPU_SYNC dma-debug: fix sg checks in debug_dma_map_sg() dma-mapping: fix the kerneldoc for dma_map_sgtable()
2021-10-20drm/amdgpu: support B0&B1 external revision id for yellow carpAaron Liu
B0 internal rev_id is 0x01, B1 internal rev_id is 0x02. The external rev_id for B0 and B1 is 0x20. The original expression is not suitable for B1. v2: squash in fix for display code (Alex) Signed-off-by: Aaron Liu <aaron.liu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-20drm/amd/display: Moved dccg init to after bios golden initJake Wang
[Why] bios_golden_init will override dccg_init during init_hw. [How] Move dccg_init to after bios_golden_init. Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-20drm/amd/display: Increase watermark latencies for DCN3.1Nikola Cornij
[why] The original latencies were causing underflow in some modes [how] Replace with the up-to-date watermark values based on new measurments Reviewed-by: Ahmad Othman <ahmad.othman@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-20drm/amd/display: increase Z9 latency to workaround underflow in Z9Eric Yang
[Why] Z9 latency is higher than when we originally tuned the watermark parameters, causing underflow. Increasing the value until the latency issues is resolved. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-20drm/amd/display: Require immediate flip support for DCN3.1 planesNicholas Kazlauskas
[Why] Immediate flip can be enabled dynamically and has higher BW requirements when validating which voltage mode to use. If we validate when it's not set then potentially DCFCLK will be too low and we will underflow. [How] DM always requires support so always require it as part of DML input parameters. This can't be enabled unconditionally on older ASIC because it blocks some expected modes so only target DCN3.1 for now. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-20drm/amd/display: Fix prefetch bandwidth calculation for DCN3.1Nicholas Kazlauskas
[Why] Prefetch BW calculated is lower than the DML reference because of a porting error that's excluding cursor and row bandwidth from the pixel data bandwidth. [How] Change the dml_max4 to dml_max3 and include cursor and row bandwidth in the same calculation as the rest of the pixel data during vactive. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-20drm/amd/display: Limit display scaling to up to true 4k for DCN 3.1Nikola Cornij
[why] The requirement is that image width up to 4096 shall be supported Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-20drm/amdgpu: fix out of bounds writeThelford Williams
Size can be any value and is user controlled resulting in overwriting the 40 byte array wr_buf with an arbitrary length of data from buf. Signed-off-by: Thelford Williams <tdwilliamsiv@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-20irqchip: Fix kernel-doc parameter typo for IRQCHIP_DECLAREFlorian Fainelli
The documentation refers to "compstr" when we have the parameter named "compat", fix the typo. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211020184859.2705451-14-f.fainelli@gmail.com
2021-10-20ARM: bcm: Removed forced select of interrupt controllersFlorian Fainelli
Now that the various second level interrupt controllers have been moved to IRQCHIP_PLATFORM_DRIVER and they do default to ARCH_BRCMSTB and ARCH_BCM2835 where relevant, remove their forced selection from the machine entry to allow an user to build them as modules. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211020184859.2705451-13-f.fainelli@gmail.com
2021-10-20arm64: broadcom: Removed forced select of interrupt controllersFlorian Fainelli
Now that the various second level interrupt controllers have been moved to IRQCHIP_PLATFORM_DRIVER and they do default to ARCH_BRCMSTB and ARCH_BCM2835 where relevant, remove their forced selection from the machine entry to allow an user to build them as modules. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211020184859.2705451-12-f.fainelli@gmail.com
2021-10-20irqchip/irq-bcm7120-l2: Switch to IRQCHIP_PLATFORM_DRIVERFlorian Fainelli
Allow the user selection and building of this interrupt controller driver as a module since it is used on ARM/ARM64 based systems as a second level interrupt controller hanging off the ARM GIC and is therefore loadable during boot. To avoid using of_irq_count() which is not exported towards module, switch the driver to use the platform_device provided by the irqchip platform driver code and resolve the number of interrupts using platform_irq_count(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211020184859.2705451-11-f.fainelli@gmail.com
generated by cgit (git 2.34.1) at 2025-09-30 20:29:21 +0000