| Age | Commit message (Collapse) | Author |
|---|
|
Due to the incorrect initial vector number in
rvu_nix_unregister_interrupts(), NIX_AF_INT_VEC_GEN is not
geeting free. Fix the vector number to include NIX_AF_INT_VEC_GEN
irq.
Fixes: 5ed66306eab6 ("octeontx2-af: Add devlink health reporters for NIX")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250327094054.2312-1-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When number of RVU VFs > 64, the vfs value passed to "rvu_queue_work"
function is incorrect. Due to which mbox workqueue entries for
VFs 0 to 63 never gets added to workqueue.
Fixes: 9bdc47a6e328 ("octeontx2-af: Mbox communication support btw AF and it's VFs")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250327091441.1284-1-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the netdev_nl_sock_priv_destroy(), an instance lock is acquired
before calling net_devmem_unbind_dmabuf(), then releasing an instance
lock(netdev_unlock(binding->dev)).
However, a binding is freed in the net_devmem_unbind_dmabuf().
So using a binding after net_devmem_unbind_dmabuf() occurs UAF.
To fix this UAF, it needs to use temporary variable.
Fixes: ba6f418fbf64 ("net: bubble up taking netdev instance lock to callers of net_devmem_unbind_dmabuf()")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250328062237.3746875-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jakub Kicinski says:
====================
selftests: drv-net: replace the rpath helper with Path objects
Trying to change the env.rpath() helper during the development
cycle was causing a lot of conflicts between net and net-next.
Let's get it converted now that the trees are converged.
v2: https://lore.kernel.org/20250306171158.1836674-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250327222315.1098596-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that net and net-next have converged we can use the Path
helpers in the ping test without conflicts.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250327222315.1098596-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 29b036be1b0b ("selftests: drv-net: test XDP, HDS auto and
the ioctl path") added an sample XDP_PASS prog in net/lib, so
that we can reuse it in various sub-directories. Delete the old
sample and use the one from the lib in existing tests.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250327222315.1098596-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The single letter + "path" helpers do not have many fans (see Link).
Use a Path object with a better name. test_dir is the replacement
for rpath(), net_lib_dir is a new path of the $ksft/net/lib directory.
The Path() class overloads the "/" operator and can be cast to string
automatically, so to get a path to a file tests can do:
path = env.test_dir / "binary"
Link: https://lore.kernel.org/CA+FuTSemTNVZ5MxXkq8T9P=DYm=nSXcJnL7CJBPZNAT_9UFisQ@mail.gmail.com
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250327222315.1098596-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
drivers/net/wan/lapbether.c uses stacked devices.
Like similar drivers, it must use netdev_lockdep_set_classes()
to avoid LOCKDEP splats.
This is similar to commit 9bfc9d65a1dc ("hamradio:
use netdev_lockdep_set_classes() helper")
Fixes: 7e4d784f5810 ("net: hold netdev instance lock during rtnetlink operations")
Reported-by: syzbot+377b71db585c9c705f8e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/67cd611c.050a0220.14db68.0073.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250327144439.2463509-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MAX31331 is an ultra-low-power, I2C Real-Time Clock RTC.
Signed-off-by: PavithraUdayakumar-adi <pavithra.u@analog.com>
Link: https://lore.kernel.org/r/20250217-add_support_max31331_fix_8-v1-2-16ebcfc02336@analog.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Added DT compatible string for MAX31331.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: PavithraUdayakumar-adi <pavithra.u@analog.com>
Link: https://lore.kernel.org/r/20250217-add_support_max31331_fix_8-v1-1-16ebcfc02336@analog.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
This was previously hard to hit since it requires racing with device
removal, but splitting up io_ref uncovered it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Struct with embedded VLA...
memcpy: detected field-spanning write (size 8) of single field "&gc->r.e" at fs/bcachefs/ec.c:465 (size 3)
WARNING: CPU: 1 PID: 936 at fs/bcachefs/ec.c:465 bch2_trigger_stripe+0x706/0x730
Modules linked in:
CPU: 1 UID: 0 PID: 936 Comm: mount.bcachefs Not tainted 6.14.0-rc6-ktest-00236-gefb0b5c62dbc #55
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:bch2_trigger_stripe+0x706/0x730
Code: b4 00 01 b9 03 00 00 00 48 89 fb 48 c7 c7 33 54 da 81 48 89 d6 49 89 d6 48 c7 c2 c3 36 db 81 e8 60 54 c5 ff 48 89 df 4c 89 f2 <0f> 0b e9 5c fd ff ff e8 fe 5e 4e 00 bf 10 00 00 00 48 c7 c6 ff ff
RSP: 0018:ffff88817081f680 EFLAGS: 00010246
RAX: f8fe7dd1c56b5600 RBX: ffff888101265368 RCX: 0000000000000027
RDX: 0000000000000008 RSI: 00000000fffbffff RDI: ffff888101265368
RBP: 0000000000000000 R08: 000000000003ffff R09: ffff88817f1fe000
R10: 00000000000bfffd R11: 0000000000000004 R12: ffff8881012652c0
R13: 0000000000000000 R14: 0000000000000008 R15: ffff88817081f6c9
FS: 00007fc428bc7c80(0000) GS:ffff888179280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffd3ee4a038 CR3: 000000010a9bc000 CR4: 0000000000750eb0
PKRU: 55555554
Call Trace:
<TASK>
? __warn+0xce/0x1b0
? bch2_trigger_stripe+0x706/0x730
? report_bug+0x11b/0x1a0
? bch2_trigger_stripe+0x706/0x730
? handle_bug+0x5e/0x90
? exc_invalid_op+0x1a/0x50
? asm_exc_invalid_op+0x1a/0x20
? bch2_trigger_stripe+0x706/0x730
bch2_gc_mark_key+0x2cf/0x430
bch2_check_allocations+0x1a64/0x1ed0
? vsnprintf+0x1ad/0x420
? bch2_check_allocations+0x191f/0x1ed0
bch2_run_recovery_passes+0x13b/0x2b0
bch2_fs_recovery+0x9b7/0x1290
? __bch2_print+0xb2/0xf0
? bch2_printbuf_exit+0x1e/0x30
? print_mount_opts+0x153/0x180
bch2_fs_start+0x274/0x3b0
bch2_fs_get_tree+0x516/0x6e0
vfs_get_tree+0x21/0xa0
do_new_mount+0x153/0x350
__x64_sys_mount+0x16c/0x1f0
do_syscall_64+0x6c/0x140
? arch_exit_to_user_mode_prepare+0x9/0x40
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
For striping across devices, we maintain "clocks", and we advance them
by the inverse of "how much free space this device has left", so that we
round robin biased in favor of devices with more free space.
This code was originally trying to do EWMA-ish stuff when originally
written, ~10 years ago, and was never properly cleaned up when it was
realized that an EWMA is not the right approach here.
That left a bug, when we rescale to keep all the clocks in the correct
range and prevent overflow.
It was assumed that we'd always be allocated from the device with the
smallest clock hand, but that's actually not correct: with the target
options, allocations will be first tried from a subset of devices, and
then the entire filesystem if that fails.
Thus, the rescale from the first allocation - allocating from a subset
of devices - can pick the wrong rescale value and cause the rest of the
clocks to go to 0, losing information.
This resuls in incorrect striping behaviour when the desired number of
replicas doesn't fit on the foreground target.
Link: https://www.reddit.com/r/bcachefs/comments/1jn3t26/replica_allocation_not_evenly_distributed_among/
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
It turns out the code to generate the x86 cpufeaturemasks.h header was
way too aggressive, and would re-generate it whenever the timestamp on
the kernel config file changed.
Now, the regular 'make *config' tools are fairly careful to not rewrite
the kernel config file unless the contents change, but other usecases
aren't that careful.
Michael Kelley reports that 'make-kpkg' ends up doing "make syncconfig"
multiple times in prepping to build, and will modify the config file in
the process (and then modify it back, but by then the timestamps have
changed).
Jakub Kicinski reports that the netdev CI does something similar in how
it generates the config file in multiple steps.
In both cases, the config file timestamp updates then cause the
cpufeaturemasks.h file to be regenerated, and that in turn then causes
lots of unnecessary rebuilds due to all the normal dependencies.
Fix it by using our 'filechk' infrastructure in the Makefile to generate
the header file. That will only write a new version of the file if the
contents of the file have actually changed.
Fixes: 841326332bcb ("x86/cpufeatures: Generate the <asm/cpufeaturemasks.h> header based on build config")
Reported-by: Michael Kelley <mhklinux@outlook.com>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/all/SN6PR02MB415756D1829740F6E8AC11D1D4D82@SN6PR02MB4157.namprd02.prod.outlook.com/
Link: https://lore.kernel.org/all/20250328162311.08134fa6@kernel.org/
Cc: Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer updates from Steven Rostedt:
- Restructure the persistent memory to have a "scratch" area
Instead of hard coding the KASLR offset in the persistent memory by
the ring buffer, push that work up to the callers of the persistent
memory as they are the ones that need this information. The offsets
and such is not important to the ring buffer logic and it should not
be part of that.
A scratch pad is now created when the caller allocates a ring buffer
from persistent memory by stating how much memory it needs to save.
- Allow where modules are loaded to be saved in the new scratch pad
Save the addresses of modules when they are loaded into the
persistent memory scratch pad.
- A new module_for_each_mod() helper function was created
With the acknowledgement of the module maintainers a new module
helper function was created to iterate over all the currently loaded
modules. This has a callback to be called for each module. This is
needed for when tracing is started in the persistent buffer and the
currently loaded modules need to be saved in the scratch area.
- Expose the last boot information where the kernel and modules were
loaded
The last_boot_info file is updated to print out the addresses of
where the kernel "_text" location was loaded from a previous boot, as
well as where the modules are loaded. If the buffer is recording the
current boot, it only prints "# Current" so that it does not expose
the KASLR offset of the currently running kernel.
- Allow the persistent ring buffer to be released (freed)
To have this in production environments, where the kernel command
line can not be changed easily, the ring buffer needs to be freed
when it is not going to be used. The memory for the buffer will
always be allocated at boot up, but if the system isn't going to
enable tracing, the memory needs to be freed. Allow it to be freed
and added back to the kernel memory pool.
- Allow stack traces to print the function names in the persistent
buffer
Now that the modules are saved in the persistent ring buffer, if the
same modules are loaded, the printing of the function names will
examine the saved modules. If the module is found in the scratch area
and is also loaded, then it will do the offset shift and use kallsyms
to display the function name. If the address is not found, it simply
displays the address from the previous boot in hex.
* tag 'trace-ringbuffer-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Use _text and the kernel offset in last_boot_info
tracing: Show last module text symbols in the stacktrace
ring-buffer: Remove the unused variable bmeta
tracing: Skip update_last_data() if cleared and remove active check for save_mod()
tracing: Initialize scratch_size to zero to prevent UB
tracing: Fix a compilation error without CONFIG_MODULES
tracing: Freeable reserved ring buffer
mm/memblock: Add reserved memory release function
tracing: Update modules to persistent instances when loaded
tracing: Show module names and addresses of last boot
tracing: Have persistent trace instances save module addresses
module: Add module_for_each_mod() function
tracing: Have persistent trace instances save KASLR offset
ring-buffer: Add ring_buffer_meta_scratch()
ring-buffer: Add buffer meta data for persistent ring buffer
ring-buffer: Use kaslr address instead of text delta
ring-buffer: Fix bytes_dropped calculation issue
|
|
.option arch clobbers .option norvc. Prevent gas from emitting
compressed instructions in the runtime const alternative blocks by
setting .option norvc after .option arch. This issue starts appearing on
gcc 15, which adds zca to the march.
Reported by: Klara Modin <klarasmodin@gmail.com>
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Fixes: a44fb5722199 ("riscv: Add runtime constant support")
Closes: https://lore.kernel.org/all/cc8f3525-20b7-445b-877b-2add28a160a2@gmail.com/
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250331-fix_runtime_const_norvc-v1-1-89bc62687ab8@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
With registered buffers we set up iterators in helpers like
io_import_fixed(), and there is no need for a import_ubuf() before that.
It was fine as we used real pointers for offset calculation, but that's
not the case anymore since introduction of ublk kernel buffers.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9b2de1a50844f848f62c8de609b494971033a6b9.1743437358.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We're relying on callers to verify the IO size, do it inside of
io_import_fixed() instead. It's safer, easier to deal with, and more
consistent as now it's done close to the iter init site.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f9c2c75ec4d356a0c61289073f68d98e8a9db190.1743446271.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Merge series from srinivas.kandagatla@linaro.org:
On Qualcomm Audioreach setup, some of the audio artifacts are seen in
both recording and playback. These patches fix issues by
1. Adjusting the fragment size that dsp can service.
2. schedule available playback buffers in time for dsp to not hit under runs
3. remove some of the manual calculations done to get hardware pointer.
With these patches, am able to see significant Audio quality improvements.
I have few more patches to optimize the dsp drivers, but for now am
keeping this series simple to address the underruns and overruns issues
noticed in pipewire setup.
Any testing would be appreciated.
Please note that on pipewire min-latency has to be set to 512 which
reflects the DSP latency requirements of 10ms. You might see audio
artifacts like glitches if you try to play audio below 256 latency.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing documentation fix from Steven Rostedt:
"Documentation fix for runtime verifier
The runtime verifier documents that were created were not referenced
in the indices, which caused warning when building the documentation
tree. Those documents are now added to the rv indices"
* tag 'trace-latency-v6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
Documentation/rv: Add sched pages to the indices
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Namhyung Kim:
"perf record:
- Introduce latency profiling using scheduler information.
The latency profiling is to show impacts on wall-time rather than
cpu-time. By tracking context switches, it can weight samples and
find which part of the code contributed more to the execution
latency.
The value (period) of the sample is weighted by dividing it by the
number of parallel execution at the moment. The parallelism is
tracked in perf report with sched-switch records. This will reduce
the portion that are run in parallel and in turn increase the
portion of serial executions.
For now, it's limited to profile processes, IOW system-wide
profiling is not supported. You can add --latency option to enable
this.
$ perf record --latency -- make -C tools/perf
I've run the above command for perf build which adds -j option to
make with the number of CPUs in the system internally. Normally
it'd show something like below:
$ perf report -F overhead,comm
...
#
# Overhead Command
# ........ ...............
#
78.97% cc1
6.54% python3
4.21% shellcheck
3.28% ld
1.80% as
1.37% cc1plus
0.80% sh
0.62% clang
0.56% gcc
0.44% perl
0.39% make
...
The cc1 takes around 80% of the overhead as it's the actual
compiler. However it runs in parallel so its contribution to
latency may be less than that. Now, perf report will show both
overhead and latency (if --latency was given at record time) like
below:
$ perf report -s comm
...
#
# Overhead Latency Command
# ........ ........ ...............
#
78.97% 48.66% cc1
6.54% 25.68% python3
4.21% 0.39% shellcheck
3.28% 13.70% ld
1.80% 2.56% as
1.37% 3.08% cc1plus
0.80% 0.98% sh
0.62% 0.61% clang
0.56% 0.33% gcc
0.44% 1.71% perl
0.39% 0.83% make
...
You can see latency of cc1 goes down to around 50% and python3 and
ld contribute a lot more than their overhead. You can use --latency
option in perf report to get the same result but ordered by
latency.
$ perf report --latency -s comm
perf report:
- As a side effect of the latency profiling work, it adds a new
output field 'latency' and a sort key 'parallelism'. The below is a
result from my system with 64 CPUs. The build was well-parallelized
but contained some serial portions.
$ perf report -s parallelism
...
#
# Overhead Latency Parallelism
# ........ ........ ...........
#
16.95% 1.54% 62
13.38% 1.24% 61
12.50% 70.47% 1
11.81% 1.06% 63
7.59% 0.71% 60
4.33% 12.20% 2
3.41% 0.33% 59
2.05% 0.18% 64
1.75% 1.09% 9
1.64% 1.85% 5
...
- Support Feodra mini-debuginfo which is a LZMA compressed symbol
table inside ".gnu_debugdata" ELF section.
perf annotate:
- Add --code-with-type option to enable data-type profiling with the
usual annotate output.
Instead of focusing on data structure, it shows code annotation
together with data type it accesses in case the instruction refers
to a memory location (and it was able to resolve the target data
type). Currently it only works with --stdio.
$ perf annotate --stdio --code-with-type
...
Percent | Source code & Disassembly of vmlinux for cpu/mem-loads,ldlat=30/pp (18 samples, percent: local period)
----------------------------------------------------------------------------------------------------------------------
: 0 0xffffffff81050610 <__fdget>:
0.00 : ffffffff81050610: callq 0xffffffff81c01b80 <__fentry__> # data-type: (stack operation)
0.00 : ffffffff81050615: pushq %rbp # data-type: (stack operation)
0.00 : ffffffff81050616: movq %rsp, %rbp
0.00 : ffffffff81050619: pushq %r15 # data-type: (stack operation)
0.00 : ffffffff8105061b: pushq %r14 # data-type: (stack operation)
0.00 : ffffffff8105061d: pushq %rbx # data-type: (stack operation)
0.00 : ffffffff8105061e: subq $0x10, %rsp
0.00 : ffffffff81050622: movl %edi, %ebx
0.00 : ffffffff81050624: movq %gs:0x7efc4814(%rip), %rax # 0x14e40 <current_task> # data-type: struct task_struct* +0
0.00 : ffffffff8105062c: movq 0x8d0(%rax), %r14 # data-type: struct task_struct +0x8d0 (files)
0.00 : ffffffff81050633: movl (%r14), %eax # data-type: struct files_struct +0 (count.counter)
0.00 : ffffffff81050636: cmpl $0x1, %eax
0.00 : ffffffff81050639: je 0xffffffff810506a9 <__fdget+0x99>
0.00 : ffffffff8105063b: movq 0x20(%r14), %rcx # data-type: struct files_struct +0x20 (fdt)
0.00 : ffffffff8105063f: movl (%rcx), %eax # data-type: struct fdtable +0 (max_fds)
0.00 : ffffffff81050641: cmpl %ebx, %eax
0.00 : ffffffff81050643: jbe 0xffffffff810506ef <__fdget+0xdf>
0.00 : ffffffff81050649: movl %ebx, %r15d
5.56 : ffffffff8105064c: movq 0x8(%rcx), %rdx # data-type: struct fdtable +0x8 (fd)
...
The "# data-type:" part was added with this change. The first few
entries are not very interesting. But later you can it accesses a
couple of fields in the task_struct, files_struct and fdtable.
perf trace:
- Support syscall tracing for different ABI. For example it can trace
system calls for 32-bit applications on 64-bit kernel
transparently.
- Add --summary-mode=total option to show global syscall summary. The
default is 'thread' to show per-thread syscall summary.
Python support:
- Add more interfaces to 'perf' module to parse events, and config,
enable or disable the event list properly so that it can implement
basic functionalities purely in Python. There is an example code
for these new interfaces in python/tracepoint.py.
- Add mypy and pylint support to enable build time checking. Fix some
code based on the findings from these tools.
Internals:
- Introduce io_dir__readdir() API to make directory traveral (usually
for proc or sysfs) efficient with less memory footprint.
JSON vendor events:
- Add events and metrics for ARM Neoverse N3 and V3
- Update events and metrics on various Intel CPUs
- Add/update events for a number of SiFive processors"
* tag 'perf-tools-for-v6.15-2025-03-27' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (229 commits)
perf bpf-filter: Fix a parsing error with comma
perf report: Fix a memory leak for perf_env on AMD
perf trace: Fix wrong size to bpf_map__update_elem call
perf tools: annotate asm_pure_loop.S
perf python: Fix setup.py mypy errors
perf test: Address attr.py mypy error
perf build: Add pylint build tests
perf build: Add mypy build tests
perf build: Rename TEST_LOGS to SHELL_TEST_LOGS
tools/build: Don't pass test log files to linker
perf bench sched pipe: fix enforced blocking reads in worker_thread
perf tools: Fix is_compat_mode build break in ppc64
perf build: filter all combinations of -flto for libperl
perf vendor events arm64 AmpereOneX: Fix frontend_bound calculation
perf vendor events arm64: AmpereOne/AmpereOneX: Mark LD_RETIRED impacted by errata
perf trace: Fix evlist memory leak
perf trace: Fix BTF memory leak
perf trace: Make syscall table stable
perf syscalltbl: Mask off ABI type for MIPS system calls
perf build: Remove Makefile.syscalls
...
|
|
If requested_clk > 128, cdns_mrvl_xspi_setup_clock() iterates over the
entire cdns_mrvl_xspi_clk_div_list array without breaking out early,
causing 'i' to go beyond the array bounds.
Fix that by stopping the loop when it gets to the last entry, clamping
the clock to the minimum 6.25 MHz.
Fixes the following warning with an UBSAN kernel:
vmlinux.o: warning: objtool: cdns_mrvl_xspi_setup_clock: unexpected end of section .text.cdns_mrvl_xspi_setup_clock
Fixes: 26d34fdc4971 ("spi: cadence: Add clock configuration for Marvell xSPI overlay")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503282236.UhfRsF3B-lkp@intel.com/
Link: https://lore.kernel.org/r/gs2ooxfkblnee6cc5yfcxh7nu4wvoqnuv4lrllkhccxgcac2jg@7snmwd73jkhs
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/h6bef6wof6zpjfp3jbhrkigqsnykdfy6j4qmmvb6gsabhianhj@k57a7hwpa3bj
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Should an error occur after a successful regulator_bulk_enable() call,
regulator_bulk_disable() should be called, as already done in the remove
function.
Instead of adding an error handling path in the probe, switch from
devm_regulator_bulk_get() to devm_regulator_bulk_get_enable() and
simplify the remove function and some other places accordingly.
Finally, add a missing const when defining rt5665_supply_names to please
checkpatch and constify a few bytes.
Fixes: 33ada14a26c8 ("ASoC: add rt5665 codec driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/e3c2aa1b2fdfa646752d94f4af968630c0d58248.1742629525.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The _DDC method should return a buffer, or an integer in case of an error.
But some Lenovo laptops incorrectly return EDID as buffer in ACPI package.
Calling _DDC generates this ACPI Warning:
ACPI Warning: \_SB.PCI0.GP17.VGA.LCD._DDC: Return type mismatch - \
found Package, expected Integer/Buffer (20240827/nspredef-254)
Use the first element of the package to get the EDID buffer.
The DSDT:
Name (AUOP, Package (0x01)
{
Buffer (0x80)
{
...
}
})
...
Method (_DDC, 1, NotSerialized) // _DDC: Display Data Current
{
If ((PAID == AUID))
{
Return (AUOP) /* \_SB_.PCI0.GP17.VGA_.LCD_.AUOP */
}
ElseIf ((PAID == IVID))
{
Return (IVOP) /* \_SB_.PCI0.GP17.VGA_.LCD_.IVOP */
}
ElseIf ((PAID == BOID))
{
Return (BOEP) /* \_SB_.PCI0.GP17.VGA_.LCD_.BOEP */
}
ElseIf ((PAID == SAID))
{
Return (SUNG) /* \_SB_.PCI0.GP17.VGA_.LCD_.SUNG */
}
Return (Zero)
}
Link: https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/Apx_B_Video_Extensions/output-device-specific-methods.html#ddc-return-the-edid-for-this-device
Cc: stable@vger.kernel.org
Fixes: c6a837088bed ("drm/amd/display: Fetch the EDID from _DDC if available for eDP")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4085
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/61c3df83ab73aba0bc7a941a443cd7faf4cf7fb0.1743195250.git.soyer@irl.hu
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
With the existing code, the buffer position is only reset in pointer
callback, which leaves the possiblity of it going over the size of
buffer size and reporting incorrect position to userspace.
Without this patch, its possible to see errors like:
snd-x1e80100 sound: invalid position: pcmC0D0p:0, pos = 12288, buffer size = 12288, period size = 1536
snd-x1e80100 sound: invalid position: pcmC0D0p:0, pos = 12288, buffer size = 12288, period size = 1536
Fixes: 9b4fe0f1cd791 ("ASoC: qdsp6: audioreach: add q6apm-dai support")
Cc: stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://patch.msgid.link/20250314174800.10142-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Period sizes less than 6k for capture path triggers overruns in the
dsp capture pipeline.
Change the period size and number of periods to value which DSP is happy with.
Fixes: 9b4fe0f1cd79 ("ASoC: qdsp6: audioreach: add q6apm-dai support")
Cc: stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://patch.msgid.link/20250314174800.10142-6-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
DSP expects the periods to be aligned to fragment sizes, currently
setting up to hw constriants on periods bytes is not going to work
correctly as we can endup with periods sizes aligned to 32 bytes however
not aligned to fragment size.
Update the constriants to use fragment size, and also set at step of
10ms for period size to accommodate DSP requirements of 10ms latency.
Fixes: 9b4fe0f1cd79 ("ASoC: qdsp6: audioreach: add q6apm-dai support")
Cc: stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://patch.msgid.link/20250314174800.10142-5-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Implement an helper function in q6apm to be able to read the current
hardware pointer for both read and write buffers.
This should help q6apm-dai to get the hardware pointer consistently
without it doing manual calculation, which could go wrong in some race
conditions.
Fixes: 9b4fe0f1cd79 ("ASoC: qdsp6: audioreach: add q6apm-dai support")
Cc: stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://patch.msgid.link/20250314174800.10142-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With the existing code, we are only setting up one period at a time, in a
ping-pong buffer style. This triggers lot of underruns in the dsp
leading to jitter noise during audio playback.
Fix this by scheduling all available periods, this will ensure that the dsp
has enough buffer feed and ultimatley fixing the underruns and audio
distortion.
Fixes: 9b4fe0f1cd79 ("ASoC: qdsp6: audioreach: add q6apm-dai support")
Cc: stable@vger.kernel.org
Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://patch.msgid.link/20250314174800.10142-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a local variable for the sqe pointer to avoid repetition.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8dbac0f9acda2d3842534eeb7ce10d9276b021ae.1743357108.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is now an io_uring private part of cmd async_data, move saved sqe
into it. Drivers are accessing it via struct io_uring_cmd::cmd.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/ecbe078dd57acefdbc4366d083327086c0879378.1743357121.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Reflect in the kconfig that zcrx requires io_uring compiled.
Fixes: 6f377873cb239 ("io_uring/zcrx: add interface queue and refill queue")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8047135a344e79dbd04ee36a7a69cc260aabc2ca.1743356260.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We're caching some of file related request flags in a tricky way, put
a build check to make sure flags don't get reshuffled.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9877577b83c25dd78224a8274f799187e7ec7639.1743407551.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A previous commit removed the use of this footnote, delete it.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 3fdf2ec7da1c ("Documentation: ublk: Drop Stefan Hajnoczi's message footnote")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When the ring is allocated, it is kzalloc-ed. ring->queue_refs will
already be initialized to 0 by default. It does not need to be
atomically set to 0.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
There is a race condition leading to a kernel crash from a null
dereference when attemping to access fc->lock in
fuse_uring_create_queue(). fc may be NULL in the case where another
thread is creating the uring in fuse_uring_create() and has set
fc->ring but has not yet set ring->fc when fuse_uring_create_queue()
reads ring->fc. There is another race condition as well where in
fuse_uring_register(), ring->nr_queues may still be 0 and not yet set
to the new value when we compare qid against it.
This fix sets fc->ring only after ring->fc and ring->nr_queues have been
set, which guarantees now that ring->fc is a proper pointer when any
queues are created and ring->nr_queues reflects the right number of
queues if ring is not NULL. We must use smp_store_release() and
smp_load_acquire() semantics to ensure the ordering will remain correct
where fc->ring is assigned only after ring->fc and ring->nr_queues have
been assigned.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Fixes: 24fe962c86f5 ("fuse: {io-uring} Handle SQEs - register commands")
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Our file system has a translation capability for S3-to-posix.
The current value of 1kiB is enough to cover S3 keys, but
does not allow encoding of %xx escape characters.
The limit is increased to (PATH_MAX - 1), as we need
3 x 1024 and that is close to PATH_MAX (4kB) already.
-1 is used as the terminating null is not included in the
length calculation.
Testing large file names was hard with libfuse/example file systems,
so I created a new memfs that does not have a 255 file name length
limitation.
https://github.com/libfuse/libfuse/pull/1077
The connection is initialized with FUSE_NAME_LOW_MAX, which
is set to the previous value of FUSE_NAME_MAX of 1024. With
FUSE_MIN_READ_BUFFER of 8192 that is enough for two file names
+ fuse headers.
When FUSE_INIT reply sets max_pages to a value > 1 we know
that fuse daemon supports request buffers of at least 2 pages
(+ header) and can therefore hold 2 x PATH_MAX file names - operations
like rename or link that need two file names are no issue then.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
fuse_notify_inval_entry and fuse_notify_delete were using fixed allocations
of FUSE_NAME_MAX to hold the file name. Often that large buffers are not
needed as file names might be smaller, so this uses the actual file name
size to do the allocation.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Introduce two new sysctls, "default_request_timeout" and
"max_request_timeout". These control how long (in seconds) a server can
take to reply to a request. If the server does not reply by the timeout,
then the connection will be aborted. The upper bound on these sysctl
values is 65535.
"default_request_timeout" sets the default timeout if no timeout is
specified by the fuse server on mount. 0 (default) indicates no default
timeout should be enforced. If the server did specify a timeout, then
default_request_timeout will be ignored.
"max_request_timeout" sets the max amount of time the server may take to
reply to a request. 0 (default) indicates no maximum timeout. If
max_request_timeout is set and the fuse server attempts to set a
timeout greater than max_request_timeout, the system will use
max_request_timeout as the timeout. Similarly, if default_request_timeout
is greater than max_request_timeout, the system will use
max_request_timeout as the timeout. If the server does not request a
timeout and default_request_timeout is set to 0 but max_request_timeout
is set, then the timeout will be max_request_timeout.
Please note that these timeouts are not 100% precise. The request may
take roughly an extra FUSE_TIMEOUT_TIMER_FREQ seconds beyond the set max
timeout due to how it's internally implemented.
$ sysctl -a | grep fuse.default_request_timeout
fs.fuse.default_request_timeout = 0
$ echo 65536 | sudo tee /proc/sys/fs/fuse/default_request_timeout
tee: /proc/sys/fs/fuse/default_request_timeout: Invalid argument
$ echo 65535 | sudo tee /proc/sys/fs/fuse/default_request_timeout
65535
$ sysctl -a | grep fuse.default_request_timeout
fs.fuse.default_request_timeout = 65535
$ echo 0 | sudo tee /proc/sys/fs/fuse/default_request_timeout
0
$ sysctl -a | grep fuse.default_request_timeout
fs.fuse.default_request_timeout = 0
[Luis Henriques: Limit the timeout to the range [FUSE_TIMEOUT_TIMER_FREQ,
fuse_max_req_timeout]]
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Luis Henriques <luis@igalia.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
There are situations where fuse servers can become unresponsive or
stuck, for example if the server is deadlocked. Currently, there's no
good way to detect if a server is stuck and needs to be killed manually.
This commit adds an option for enforcing a timeout (in seconds) for
requests where if the timeout elapses without the server responding to
the request, the connection will be automatically aborted.
Please note that these timeouts are not 100% precise. For example, the
request may take roughly an extra FUSE_TIMEOUT_TIMER_FREQ seconds beyond
the requested timeout due to internal implementation, in order to
mitigate overhead.
[SzM: Bump the API version number]
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
If filesystem doesn't support FUSE_LINK (i.e. returns -ENOSYS), then
remember this and next time return immediately, without incurring the
overhead of a round trip to the server.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
link() is documented to return EPERM when a filesystem doesn't support
the operation, return that instead.
Link: https://github.com/libfuse/libfuse/issues/925
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Function fuse_uring_create() is used only from dev_uring.c and does not
need to be exposed in the header file. Furthermore, it has the wrong
signature.
While there, also remove the 'struct fuse_ring' forward declaration.
Signed-off-by: Luis Henriques <luis@igalia.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
task-A (application) might be in request_wait_answer and
try to remove the request when it has FR_PENDING set.
task-B (a fuse-server io-uring task) might handle this
request with FUSE_IO_URING_CMD_COMMIT_AND_FETCH, when
fetching the next request and accessed the req from
the pending list in fuse_uring_ent_assign_req().
That code path was not protected by fiq->lock and so
might race with task-A.
For scaling reasons we better don't use fiq->lock, but
add a handler to remove canceled requests from the queue.
This also removes usage of fiq->lock from
fuse_uring_add_req_to_ring_ent() altogether, as it was
there just to protect against this race and incomplete.
Also added is a comment why FR_PENDING is not cleared.
Fixes: c090c8abae4b ("fuse: Add io-uring sqe commit and fetch support")
Cc: <stable@vger.kernel.org> # v6.14
Reported-by: Joanne Koong <joannelkoong@gmail.com>
Closes: https://lore.kernel.org/all/CAJnrk1ZgHNb78dz-yfNTpxmW7wtT88A=m-zF0ZoLXKLUHRjNTw@mail.gmail.com/
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Correct detect condition is applied to the entire 5221 family of PHYs.
Fixes: 3abbd0699b67 ("net: phy: broadcom: add support for BCM5221 phy")
Signed-off-by: Jim Liu <jim.t90615@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
invalid
Prior to commit 496121c02127 ("ACPI: processor: idle: Allow probing on
platforms with one ACPI C-state"), the acpi_idle driver wouldn't load on
systems without a valid C-State at least as deep as C2.
The behavior was desirable for guests on hypervisors such as VMWare
ESXi, which by default don't have the _CST ACPI method, and set the C2
and C3 latencies to 101 and 1001 microseconds respectively via the FADT,
to signify they're unsupported.
Since the above change though, these virtualized deployments end up
loading acpi_idle, and thus entering the default C1 C-State set by
acpi_processor_get_power_info_default(); this is undesirable for a
system that's communicating to the OS it doesn't want C-States (missing
_CST, and invalid C2/C3 in FADT).
Make acpi_processor_get_power_info_fadt() return -ENODEV in that case,
so that acpi_processor_get_cstate_info() exits early and doesn't set
pr->flags.power = 1.
Fixes: 496121c02127 ("ACPI: processor: idle: Allow probing on platforms with one ACPI C-state")
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Link: https://patch.msgid.link/20250328143040.9348-1-ggherdovich@suse.cz
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
IPC message cannot be sent from the irq thread directly as the message will
not receive the reply (interrupts are disabled) and it will time out - the
reply is going to be received right after the we leave the irq thread.
This is a different case compared to the delayed IPC messages due to DSP
busy state.
Add support for sending the mic privacy change notification to the firmware
from a work instead of the process callback.
The work needs to be canceled if there is a chance that it might be running
on module remove or before system/runtime suspend.
Fixes: 4a43c3241ec3 ("ASoC: SOF: Intel: ptl: Add support for mic privacy")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20250331070623.5985-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The perf events code fails to account for total_time_enabled of
inactive events.
Here is a failure case for accounting total_time_enabled for
CPU PMU events:
sudo ./perf stat -vvv -e armv8_pmuv3_0/event=0x08/ -e armv8_pmuv3_1/event=0x08/ -- stress-ng --pthread=2 -t 2s
...
armv8_pmuv3_0/event=0x08/: 1138698008 2289429840 2174835740
armv8_pmuv3_1/event=0x08/: 1826791390 1950025700 847648440
` ` `
` ` > total_time_running with child
` > total_time_enabled with child
> count with child
Performance counter stats for 'stress-ng --pthread=2 -t 2s':
1,138,698,008 armv8_pmuv3_0/event=0x08/ (94.99%)
1,826,791,390 armv8_pmuv3_1/event=0x08/ (43.47%)
The two events above are opened on two different CPU PMUs, for example,
each event is opened for a cluster in an Arm big.LITTLE system, they
will never run on the same CPU. In theory, the total enabled time should
be same for both events, as two events are opened and closed together.
As the result show, the two events' total enabled time including
child event is different (2289429840 vs 1950025700).
This is because child events are not accounted properly
if a event is INACTIVE state when the task exits:
perf_event_exit_event()
`> perf_remove_from_context()
`> __perf_remove_from_context()
`> perf_child_detach() -> Accumulate child_total_time_enabled
`> list_del_event() -> Update child event's time
The problem is the time accumulation happens prior to child event's
time updating. Thus, it misses to account the last period's time when
the event exits.
The perf core layer follows the rule that timekeeping is tied to state
change. To address the issue, make __perf_remove_from_context()
handle the task exit case by passing 'DETACH_EXIT' to it and
invoke perf_event_state() for state alongside with accounting the time.
Then, perf_child_detach() populates the time into the parent's time metrics.
After this patch, the bug is fixed:
sudo ./perf stat -vvv -e armv8_pmuv3_0/event=0x08/ -e armv8_pmuv3_1/event=0x08/ -- stress-ng --pthread=2 -t 10s
...
armv8_pmuv3_0/event=0x08/: 15396770398 32157963940 21898169000
armv8_pmuv3_1/event=0x08/: 22428964974 32157963940 10259794940
Performance counter stats for 'stress-ng --pthread=2 -t 10s':
15,396,770,398 armv8_pmuv3_0/event=0x08/ (68.10%)
22,428,964,974 armv8_pmuv3_1/event=0x08/ (31.90%)
[ mingo: Clarified the changelog. ]
Fixes: ef54c1a476aef ("perf: Rework perf_event_exit_event()")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Link: https://lore.kernel.org/r/20250326082003.1630986-1-yeoreum.yun@arm.com
|
|
The fixed commit sets up dev.dma_range_map but missed that this is
supposed to be an array of struct bus_dma_region with a sentinel element
with the size field set to 0 at the end. This would lead to overruns in
e.g. dma_range_map_min(). It could also result in wrong translations
instead of DMA_MAPPING_ERROR in translate_phys_to_dma() if the paddr
were to not fit in the aperture. Fix this by using the
dma_direct_set_offset() helper which creates a sentinel for us.
Fixes: d236843a6964 ("s390/pci: store DMA offset in bus_dma_region")
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20250312-fix_dma_map_alloc-v2-1-530108d9de21@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
In case of an unexpected low address protection fault in user mode dump
fault info to make debugging a bit easier. At least the teid is valid,
while dumping the page table is racy, since no lock is held.
But it might still give some hints.
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
