| Age | Commit message (Collapse) | Author |
|---|
|
- Destroy the EPC device in devm_pci_epc_destroy(), which previously didn't
call devres_release() (Zijun Hu)
- Simplify pci_epc_get() with class_find_device_by_name() (Zijun Hu)
- Finish virtual EP removal in pci_epf_remove_vepf(), which previously
caused a subsequent pci_epf_add_vepf() to fail with -EBUSY (Zijun Hu)
- Write BAR_MASK before iATU registers in pci_epc_set_bar() so we don't
depend on the BAR_MASK reset value being larger than the requested BAR
size (Niklas Cassel)
- Prevent changing BAR size/flags in pci_epc_set_bar() to prevent reads
from bypassing the iATU if we reduced the BAR size (Niklas Cassel)
- Verify address alignment when programming iATU so we don't attempt to
write bits that are read-only because of the BAR size, which could lead
to directing accesses to the wrong address (Niklas Cassel)
- Implement artpec6 pci_epc_features so we can rely on all drivers
supporting it so we can use it in EPC core code (Niklas Cassel)
- Check for BARs of fixed size to prevent endpoint drivers from trying to
change their size (Niklas Cassel)
- Verify that requested BAR size is a power of two when endpoint driver
sets the BAR (Niklas Cassel)
* pci/endpoint:
PCI: endpoint: Verify that requested BAR size is a power of two
PCI: endpoint: Add size check for fixed size BARs in pci_epc_set_bar()
PCI: artpec6: Implement dw_pcie_ep operation get_features
PCI: dwc: ep: Add 'address' alignment to 'size' check in dw_pcie_prog_ep_inbound_atu()
PCI: dwc: ep: Prevent changing BAR size/flags in pci_epc_set_bar()
PCI: dwc: ep: Write BAR_MASK before iATU registers in pci_epc_set_bar()
PCI: endpoint: Finish virtual EP removal in pci_epf_remove_vepf()
PCI: endpoint: Simplify pci_epc_get()
PCI: endpoint: Destroy the EPC device in devm_pci_epc_destroy()
PCI: endpoint: Replace magic number '6' by PCI_STD_NUM_BARS
|
|
- Add Microchip PCI100X device IDs (Rakesh Babu Saladi)
* pci/switchtec:
PCI: switchtec: Add Microchip PCI100X device IDs
|
|
- Avoid D3 for Root Ports on TUXEDO Sirius Gen1 with old BIOS because the
system can't wake up from suspend (Werner Sembach)
* pci/pm:
PCI: Avoid putting some root ports into D3 on TUXEDO Sirius Gen1
|
|
- Move reset related sysfs code from pci.c to pci-sysfs.c where other
similar code lives (Ilpo Järvinen)
- Simplify reset_method_store() memory management by using __free() instead
of explicit kfree() cleanup (Ilpo Järvinen)
- Drop unnecessary zero initializer (Ilpo Järvinen)
* pci/pci-sysfs:
PCI/sysfs: Remove unnecessary zero in initializer
PCI/sysfs: Use __free() in reset_method_store()
PCI/sysfs: Move reset related sysfs code to correct file
|
|
- Unexport of_pci_parse_bus_range() since it's only used in of.c (Bjorn
Helgaas)
- Drop 'No bus range found' message so we don't complain when DTs don't
specify the default 'bus-range = <0x00 0xff>' (Bjorn Helgaas)
- Simplify devm_of_pci_get_host_bridge_resources() interface by dropping
parameters that are always the same default values (Bjorn Helgaas)
- Update comment reference to of_pci_get_host_bridge_resources(), which no
longer exists (Bjorn Helgaas)
- Rename the drivers/pci/of_property.c struct of_pci_range to
of_pci_range_entry to avoid confusion with the global of_pci_range in
include/linux/of_address.h (Bjorn Helgaas)
* pci/of:
PCI: of_property: Rename struct of_pci_range to of_pci_range_entry
sparc/PCI: Update reference to devm_of_pci_get_host_bridge_resources()
PCI: of: Simplify devm_of_pci_get_host_bridge_resources() interface
PCI: of: Drop 'No bus range found' message
PCI: Unexport of_pci_parse_bus_range()
|
|
- Unexport pcie_read_tlp_log() to encourage drivers to use PCI core logging
rather than building their own (Ilpo Järvinen)
- Move TLP Log handling to its own file (Ilpo Järvinen)
- Add #defines for TLP Header/Prefix log sizes (Ilpo Järvinen)
- Store number of supported End-End TLP Prefixes always so we can read the
correct number of DWORDs from the TLP Prefix Log (Ilpo Järvinen)
- Read TLP Prefixes in addition to the Header Log in pcie_read_tlp_log()
(Ilpo Järvinen)
- Add pcie_print_tlp_log() to consolidate printing of TLP Header and Prefix
Log (Ilpo Järvinen)
* pci/err:
PCI: Add pcie_print_tlp_log() to print TLP Header and Prefix Log
PCI: Add TLP Prefix reading to pcie_read_tlp_log()
PCI: Store number of supported End-End TLP Prefixes
PCI: Use unsigned int i in pcie_read_tlp_log()
PCI: Use same names in pcie_read_tlp_log() prototype and definition
PCI: Add defines for TLP Header/Prefix log sizes
PCI: Move TLP Log handling to its own file
PCI: Don't expose pcie_read_tlp_log() outside PCI subsystem
|
|
- Batch sizing of multiple BARs while memory decoding is disabled instead
of disabling/enabling decoding for each BAR individually; this optimizes
virtualized environments where toggling decoding enable is expensive
(Alex Williamson)
* pci/enumeration:
PCI: Batch BAR sizing operations
|
|
- Quirk the Intel Raptor Lake-P PIO log size to accommodate vendor BIOSes
that don't configure it correctly (Takashi Iwai)
* pci/dpc:
PCI/DPC: Quirk PIO log size for Intel Raptor Lake-P
|
|
- Update resource request API documentation to encourage callers to supply
a driver name when requesting resources (Philipp Stanner)
- Export pci_intx_unmanaged() and pcim_intx() (always managed) so callers
of pci_intx() (which is sometimes managed) can explicitly choose the one
they need (Philipp Stanner)
- Convert drivers from pci_intx() to always-managed pcim_intx() or
never-managed pci_intx_unmanaged(): amd_sfh, ata (ahci, ata_piix,
pata_rdc, sata_sil24, sata_sis, sata_uli, sata_vsc), bnx2x, bna, ntb,
qtnfmac, rtsx, tifm_7xx1, vfio, xen-pciback (Philipp Stanner)
- Remove pci_intx_unmanaged() since pci_intx() is now always unmanaged and
pcim_intx() is always managed (Philipp Stanner)
* pci/devres:
PCI: Remove devres from pci_intx()
net/ethernet: Use never-managed version of pci_intx()
HID: amd_sfh: Use always-managed version of pcim_intx()
wifi: qtnfmac: use always-managed version of pcim_intx()
ata: Use always-managed version of pci_intx()
PCI/MSI: Use never-managed version of pci_intx()
vfio/pci: Use never-managed version of pci_intx()
misc: Use never-managed version of pci_intx()
ntb: Use never-managed version of pci_intx()
drivers/xen: Use never-managed version of pci_intx()
PCI: Export pci_intx_unmanaged() and pcim_intx()
PCI: Encourage resource request API users to supply driver name
|
|
- Save parent L1 PM Substates config so when we restore it along with an
endpoint's config, the parent info isn't junk (Jian-Hong Pan)
* pci/aspm:
PCI/ASPM: Save parent L1SS config in pci_save_aspm_l1ss_state()
|
|
Toggling memory enable is free on bare metal, but potentially expensive
in virtualized environments as the device MMIO spaces are added and
removed from the VM address space, including DMA mapping of those spaces
through the IOMMU where peer-to-peer is supported. Currently memory
decode is disabled around sizing each individual BAR, even for SR-IOV
BARs while VF Enable is cleared.
This can be better optimized for virtual environments by sizing a set
of BARs at once, stashing the resulting mask into an array, while only
toggling memory enable once. This also naturally improves the SR-IOV
path as the caller becomes responsible for any necessary decode disables
while sizing BARs, therefore SR-IOV BARs are sized relying only on the
VF Enable rather than toggling the PF memory enable in the command
register.
Link: https://lore.kernel.org/r/20250120182202.1878581-1-alex.williamson@redhat.com
Reported-by: Mitchell Augustin <mitchell.augustin@canonical.com>
Link: https://lore.kernel.org/r/CAHTA-uYp07FgM6T1OZQKqAdSA5JrZo0ReNEyZgQZub4mDRrV5w@mail.gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Mitchell Augustin <mitchell.augustin@canonical.com>
Reviewed-by: Mitchell Augustin <mitchell.augustin@canonical.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add Microchip parts to the Device ID table so the driver supports PCI100x
devices.
Add a new macro to quirk the Microchip Switchtec PCI100x parts to allow DMA
access via NTB to work when the IOMMU is turned on.
PCI100x family has 6 variants; each variant is designed for different
application usages, different port counts and lane counts:
PCI1001 has 1 x4 upstream port and 3 x4 downstream ports
PCI1002 has 1 x4 upstream port and 4 x2 downstream ports
PCI1003 has 2 x4 upstream ports, 2 x2 upstream ports, and 2 x2
downstream ports
PCI1004 has 4 x4 upstream ports
PCI1005 has 1 x4 upstream port and 6 x2 downstream ports
PCI1006 has 6 x2 upstream ports and 2 x2 downstream ports
[Historical note: these parts use PCI_VENDOR_ID_EFAR (0x1055), from EFAR
Microsystems, which was acquired in 1996 by Standard Microsystems Corp,
which was acquired by Microchip Technology in 2012. The PCI-SIG confirms
that Vendor ID 0x1055 is assigned to Microchip even though it's not
visible via https://pcisig.com/membership/member-companies]
Link: https://lore.kernel.org/r/20250120095524.243103-1-Saladi.Rakeshbabu@microchip.com
Signed-off-by: Rakesh Babu Saladi <Saladi.Rakeshbabu@microchip.com>
[bhelgaas: Vendor ID history]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-By: Logan Gunthorpe <logang@deltatee.com>
|
|
Previously there were two definitions of struct of_pci_range: one in
include/linux/of_address.h and another local to drivers/pci/of_property.c.
Rename the local struct of_pci_range to of_pci_range_entry to avoid
confusion.
Link: https://lore.kernel.org/r/20250117161037.643953-1-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
|
|
pci_intx() is a hybrid function which can sometimes be managed through
devres. This hybrid nature is undesirable.
Since all users of pci_intx() have by now been ported either to
always-managed pcim_intx() or never-managed pci_intx_unmanaged(), the
devres functionality can be removed from pci_intx().
Consequently, pci_intx_unmanaged() is now redundant, because pci_intx()
itself is now unmanaged.
Remove the devres functionality from pci_intx(). Have all users of
pci_intx_unmanaged() call pci_intx(). Remove pci_intx_unmanaged().
Link: https://lore.kernel.org/r/20241209130632.132074-13-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
|
|
pci_intx() is a hybrid function which can sometimes be managed through
devres. To remove this hybrid nature from pci_intx(), it is necessary to
port users to either an always-managed or a never-managed version.
broadcom/bnx2x and brocade/bna enable their PCI devices with
pci_enable_device(). Thus, they need the never-managed version.
Replace pci_intx() with pci_intx_unmanaged().
Link: https://lore.kernel.org/r/20241209130632.132074-5-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
|
|
pci_intx() is a hybrid function which can sometimes be managed through
devres. To remove this hybrid nature from pci_intx(), it is necessary to
port users to either an always-managed or a never-managed version.
All users of amd_mp2_pci_remove(), where pci_intx() is used, call
pcim_enable_device(), which is why the driver needs the always-managed
version.
Replace pci_intx() with pcim_intx().
Link: https://lore.kernel.org/r/20241209130632.132074-12-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
|
|
pci_intx() is a hybrid function which can sometimes be managed through
devres. To remove this hybrid nature from pci_intx(), it is necessary to
port users to either an always-managed or a never-managed version.
qtnfmac enables its PCI device with pcim_enable_device(). Thus, it needs
the always-managed version.
Replace pci_intx() with pcim_intx().
Link: https://lore.kernel.org/r/20241209130632.132074-11-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
|
|
pci_intx() is a hybrid function which can sometimes be managed through
devres. To remove this hybrid nature from pci_intx(), it is necessary to
port users to either an always-managed or a never-managed version.
All users in ata enable their PCI devices with pcim_enable_device(). Thus,
they need the always-managed version.
Replace pci_intx() with pcim_intx().
Link: https://lore.kernel.org/r/20241209130632.132074-10-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Niklas Cassel <cassel@kernel.org>
|
|
pci_intx() is a hybrid function which can sometimes be managed through
devres. To remove this hybrid nature from pci_intx(), it is necessary to
port users to either an always-managed or a never-managed version.
MSI sets up its own separate devres callback implicitly in
pcim_setup_msi_release(). This callback ultimately uses pci_intx(), which
is problematic since the callback runs on driver detach.
That problem has last been described here:
https://lore.kernel.org/all/ee44ea7ac760e73edad3f20b30b4d2fff66c1a85.camel@redhat.com/
Replace the call to pci_intx() with one to the never-managed version
pci_intx_unmanaged().
Link: https://lore.kernel.org/r/20241209130632.132074-9-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
|
|
pci_intx() is a hybrid function which can sometimes be managed through
devres. To remove this hybrid nature from pci_intx(), it is necessary to
port users to either an always-managed or a never-managed version.
vfio enables its PCI device with pci_enable_device(). Thus, it needs the
never-managed version.
Replace pci_intx() with pci_intx_unmanaged().
Link: https://lore.kernel.org/r/20241209130632.132074-8-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
|
|
pci_intx() is a hybrid function which can sometimes be managed through
devres. To remove this hybrid nature from pci_intx(), it is necessary to
port users to either an always-managed or a never-managed version.
cardreader/rtsx_pcr.c and tifm_7xx1.c enable their PCI devices with
pci_enable_device(). Thus, they need the never-managed version.
Replace pci_intx() with pci_intx_unmanaged().
Link: https://lore.kernel.org/r/20241209130632.132074-7-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
pci_intx() is a hybrid function which can sometimes be managed through
devres. To remove this hybrid nature from pci_intx(), it is necessary to
port users to either an always-managed or a never-managed version.
hw/amd and how/intel enable their PCI devices with pci_enable_device().
Thus, they need the never-managed version.
Replace pci_intx() with pci_intx_unmanaged().
Link: https://lore.kernel.org/r/20241209130632.132074-6-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> # ntb_hw_amd.c
Acked-by: Dave Jiang <dave.jiang@intel.com> # ntb_hw_gen1.c
|
|
pci_intx() is a hybrid function which can sometimes be managed through
devres. To remove this hybrid nature from pci_intx(), it is necessary to
port users to either an always-managed or a never-managed version.
xen enables its PCI device with pci_enable_device(). Thus, it needs the
never-managed version.
Replace pci_intx() with pci_intx_unmanaged().
Link: https://lore.kernel.org/r/20241209130632.132074-4-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Juergen Gross <jgross@suse.com>
|
|
pci_intx() is a hybrid function which sometimes performs devres operations,
depending on whether pcim_enable_device() has been used to enable the
pci_dev. This sometimes-managed nature of the function is problematic.
Notably, it causes the function to allocate under some circumstances which
makes it unusable from interrupt context.
Export pcim_intx() (which is always managed) and rename __pcim_intx()
(which is never managed) to pci_intx_unmanaged() and export it as well.
Then all callers of pci_intx() can be ported to the version they need,
depending whether they use pci_enable_device() or pcim_enable_device().
Link: https://lore.kernel.org/r/20241209130632.132074-3-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Add pcie_print_tlp_log() to print TLP Header and Prefix Log. Print End-End
Prefixes only if they are non-zero.
Consolidate the few places which currently print TLP using custom
formatting.
Link: https://lore.kernel.org/r/20250114170840.1633-9-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
pcie_read_tlp_log() handles only 4 Header Log DWORDs but TLP Prefix Log
(PCIe r6.1 secs 7.8.4.12 & 7.9.14.13) may also be present.
Generalize pcie_read_tlp_log() and struct pcie_tlp_log to also handle TLP
Prefix Log. The relevant registers are formatted identically in AER and DPC
Capability, but has these variations:
a) The offsets of TLP Prefix Log registers vary.
b) DPC RP PIO TLP Prefix Log register can be < 4 DWORDs.
c) AER TLP Prefix Log Present (PCIe r6.1 sec 7.8.4.7) can indicate Prefix
Log is not present.
Therefore callers must pass the offset of the TLP Prefix Log register and
the entire length to pcie_read_tlp_log() to be able to read the correct
number of TLP Prefix DWORDs from the correct offset.
Link: https://lore.kernel.org/r/20250114170840.1633-8-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: squash ternary fix from
https://lore.kernel.org/r/20250116172019.88116-1-colin.i.king@gmail.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
5bd51b35c7cb ("PCI: Rework of_pci_get_host_bridge_resources() to
devm_of_pci_get_host_bridge_resources()") converted and renamed
of_pci_get_host_bridge_resources(). Update the comment reference to match.
Link: https://lore.kernel.org/r/20250113231557.441289-5-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Andreas Larsson <andreas@gaisler.com>
|
|
Previously pci_parse_request_of_pci_ranges() supplied the default bus range
to devm_of_pci_get_host_bridge_resources(), but that function is static and
has no other callers, so there's no reason to complicate its interface by
passing the default bus range.
Drop the busno and bus_max parameters and use 0x0 and 0xff directly in
devm_of_pci_get_host_bridge_resources().
Link: https://lore.kernel.org/r/20250113231557.441289-4-helgaas@kernel.org
[bhelgaas: dev_warn() for invalid end of bus-range]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The typical bus range for a host bridge is [bus 00-ff], and
devm_of_pci_get_host_bridge_resources() defaults to that unless DT contains
a "bus-range" property.
devm_of_pci_get_host_bridge_resources() previously emitted a message when
there was no "bus-range" property, but that seems unnecessary for this
common situation. Remove the message.
Link: https://lore.kernel.org/r/20250113231557.441289-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
|
|
of_pci_parse_bus_range() is only used in drivers/pci/of.c, so make it
static and unexport it.
Link: https://lore.kernel.org/r/20250113231557.441289-2-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
|
|
Apparently the Raptor Lake-P reference firmware configures the PIO log size
correctly, but some vendor BIOSes, including at least ASUSTeK COMPUTER INC.
Zenbook UX3402VA_UX3402VA, do not.
Apply the quirk for Raptor Lake-P. This prevents kernel complaints like:
DPC: RP PIO log size 0 is invalid
and also enables the DPC driver to dump the RP PIO Log registers when DPC
is triggered.
Note that the bug report also mentions 8086:a76e, which has been already
added by 627c6db20703 ("PCI/DPC: Quirk PIO log size for Intel Raptor Lake
Root Ports").
Link: https://lore.kernel.org/r/20250102164315.7562-1-tiwai@suse.de
Link: https://bugzilla.suse.com/show_bug.cgi?id=1234623
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
commit 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend") sets the
policy that all PCIe ports are allowed to use D3. When the system is
suspended if the port is not power manageable by the platform and won't be
used for wakeup via a PME this sets up the policy for these ports to go
into D3hot.
This policy generally makes sense from an OSPM perspective but it leads to
problems with wakeup from suspend on the TUXEDO Sirius 16 Gen 1 with a
specific old BIOS. This manifests as a system hang.
On the affected Device + BIOS combination, add a quirk for the root port of
the problematic controller to ensure that these root ports are not put into
D3hot at suspend.
This patch is based on
https://lore.kernel.org/linux-pci/20230708214457.1229-2-mario.limonciello@amd.com
but with the added condition both in the documentation and in the code to
apply only to the TUXEDO Sirius 16 Gen 1 with a specific old BIOS and only
the affected root ports.
Fixes: 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend")
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250114222436.1075456-1-wse@tuxedocomputers.com
Co-developed-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Cc: <stable@vger.kernel.org> # 6.1+
|
|
Providing empty initializer for an array is enough to set its elements
to zero. Thus, remove the redundant 0 from the initializer.
Link: https://lore.kernel.org/r/20241028174046.1736-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Use __free() from cleanup.h to handle freeing options in
reset_method_store() as it simplifies the code flow.
Link: https://lore.kernel.org/r/20241028174046.1736-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Most PCI sysfs code and structs are in a dedicated file but a few reset
related things remain in pci.c. Move also them to pci-sysfs.c and drop
pci_dev_reset_method_attr_is_visible() as it is 100% duplicate of
pci_dev_reset_attr_is_visible().
Link: https://lore.kernel.org/r/20241028174046.1736-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
eetlp_prefix_path in the struct pci_dev tells if End-End TLP Prefixes
are supported by the path or not, and the value is only calculated if
CONFIG_PCI_PASID is set.
The Max End-End TLP Prefixes field in the Device Capabilities Register 2
also tells how many (1-4) End-End TLP Prefixes are supported (PCIe r6.2 sec
7.5.3.15). The number of supported End-End Prefixes is useful for reading
correct number of DWORDs from TLP Prefix Log register in AER capability
(PCIe r6.2 sec 7.8.4.12).
Replace eetlp_prefix_path with eetlp_prefix_max and determine the number of
supported End-End Prefixes regardless of CONFIG_PCI_PASID so that an
upcoming commit generalizing TLP Prefix Log register reading does not have
to read extra DWORDs for End-End Prefixes that never will be there.
The value stored into eetlp_prefix_max is directly derived from device's
Max End-End TLP Prefixes and does not consider limitations imposed by
bridges or the Root Port beyond supported/not supported flags. This is
intentional for two reasons:
1) PCIe r6.2 spec sections 2.2.10.4 & 6.2.4.4 indicate that a TLP is
malformed only if the number of prefixes exceed the number of Max
End-End TLP Prefixes, which seems to be the case even if the device
could never receive that many prefixes due to smaller maximum imposed
by a bridge or the Root Port. If TLP parsing is later added, this
distinction is significant in interpreting what is logged by the TLP
Prefix Log registers and the value matching to the Malformed TLP
threshold is going to be more useful.
2) TLP Prefix handling happens autonomously on a low layer and the value
in eetlp_prefix_max is not programmed anywhere by the kernel (i.e.,
there is no limiter OS can control to prevent sending more than N TLP
Prefixes).
Link: https://lore.kernel.org/r/20250114170840.1633-7-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
|
|
Loop variable i counting from 0 upwards does not need to be signed so make
it unsigned int.
Link: https://lore.kernel.org/r/20250114170840.1633-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
pcie_read_tlp_log()'s prototype and function signature diverged due to
changes made while applying.
Make the parameters of pcie_read_tlp_log() named identically.
Link: https://lore.kernel.org/r/20250114170840.1633-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
|
|
Add defines for AER and DPC capabilities TLP Header Logging register sizes
(PCIe r6.2, sec 7.8.4 / 7.9.14) and replace literals with them.
Link: https://lore.kernel.org/r/20250114170840.1633-4-ilpo.jarvinen@linux.intel.com
Suggested-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
TLP Log is a PCIe feature and is processed only by AER and DPC.
Configwise, DPC depends AER being enabled. In lack of better place, the TLP
Log handling code was initially placed into pci.c but it can be easily
placed in a separate file.
Move TLP Log handling code to its own file under pcie/ subdirectory and
include it only when AER is enabled.
Link: https://lore.kernel.org/r/20250114170840.1633-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
|
|
pcie_read_tlp_log() was exposed by the commit 0a5a46a6a61b ("PCI/AER:
Generalize TLP Header Log reading") with the intent that drivers could use
it, but the PCI maintainer later decided that drivers should be encouraged
to use PCI core diagnostic logging of generic AER registers rather than
building their own.
Drivers that currently implement their own diagnostic logging include ixgbe
(ixgbe_io_error_detected()) and iwlwifi (iwl_trans_pcie_dump_regs()).
Remove the unwanted EXPORT of pcie_read_tlp_log() and remove it from
include/linux/aer.h.
Link: https://lore.kernel.org/r/20250114170840.1633-2-ilpo.jarvinen@linux.intel.com
Link: https://lore.kernel.org/all/20240322193011.GA701027@bhelgaas/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
|
|
When allocating a BAR using pci_epf_alloc_space(), there are checks that
round up the size to a power of two.
However, there is no check in pci_epc_set_bar() which verifies that the
requested BAR size is a power of two.
Add a power of two check in pci_epc_set_bar(), so that we don't need to
add such a check in each and every PCI endpoint controller driver.
Link: https://lore.kernel.org/r/20241213143301.4158431-14-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
A BAR of type BAR_FIXED has a fixed BAR size (the size cannot be changed).
When using pci_epf_alloc_space() to allocate backing memory for a BAR,
pci_epf_alloc_space() will always set the size to the fixed BAR size if
the BAR type is BAR_FIXED (and will give an error if you the requested size
is larger than the fixed BAR size).
However, some drivers might not call pci_epf_alloc_space() before calling
pci_epc_set_bar(), so add a check in pci_epc_set_bar() to ensure that an
EPF driver cannot set a size different from the fixed BAR size, if the BAR
type is BAR_FIXED.
The pci_epc_function_is_valid() check is removed because this check is now
done by pci_epc_get_features().
Link: https://lore.kernel.org/r/20241213143301.4158431-13-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
All non-DWC EPC drivers implement (struct pci_epc *)->ops->get_features().
All DWC EPC drivers implement (struct dw_pcie_ep *)->ops->get_features(),
except for pcie-artpec6.c.
epc_features has been required in pci-epf-test.c since commit 6613bc2301ba
("PCI: endpoint: Fix NULL pointer dereference for ->get_features()").
A follow-up commit will make further use of epc_features in EPC core code.
Implement epc_features in the only EPC driver where it is currently not
implemented.
Link: https://lore.kernel.org/r/20241213143301.4158431-12-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
|
|
dw_pcie_prog_ep_inbound_atu()
dw_pcie_prog_ep_inbound_atu() is used to program an inbound iATU in
"BAR Match Mode".
A memory address returned by e.g. kmalloc() is guaranteed to have natural
alignment (aligned to the size of the allocation). It is however not
guaranteed that pci_epc_set_bar() (and thus dw_pcie_prog_ep_inbound_atu())
is supplied an address that has natural alignment. (An EPF driver can send
in an arbitrary physical address to pci_epc_set_bar().)
The DWC Databook description for the LWR_TARGET_RW and LWR_TARGET_HW fields
in the IATU_LWR_TARGET_ADDR_OFF_INBOUND_i registers state that:
"Field size depends on log2(BAR_MASK+1) in BAR match mode."
I.e. only the upper bits are writable, and the number of writable bits is
dependent on the configured BAR_MASK.
Add a check to ensure that the physical address programmed in the iATU is
aligned to the size of the BAR (BAR_MASK+1), as without this, we can get
hard to debug errors, as we could write to bits that are read-only (without
getting a write error), which could cause the iATU to end up redirecting to
a physical address that is different from the address that we intended.
Link: https://lore.kernel.org/r/20241213143301.4158431-11-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
In commit 4284c88fff0e ("PCI: designware-ep: Allow pci_epc_set_bar() update
inbound map address") set_bar() was modified to support dynamically
changing the backing physical address of a BAR that was already configured.
This means that set_bar() can be called twice, without ever calling
clear_bar() (as calling clear_bar() would clear the BAR's PCI address
assigned by the host).
This can only be done if the new BAR size/flags does not differ from the
existing BAR configuration. Add these missing checks.
If we allow set_bar() to set e.g. a new BAR size that differs from the
existing BAR size, the new address translation range will be smaller than
the BAR size already determined by the host, which would mean that a read
past the new BAR size would pass the iATU untranslated, which could allow
the host to read memory not belonging to the new struct pci_epf_bar.
While at it, add comments which clarifies the support for dynamically
changing the physical address of a BAR. (Which was also missing.)
Fixes: 4284c88fff0e ("PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address")
Link: https://lore.kernel.org/r/20241213143301.4158431-10-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: stable@vger.kernel.org
|
|
The "DesignWare Cores PCI Express Controller Register Descriptions,
Version 4.60a", section "1.21.70 IATU_LWR_TARGET_ADDR_OFF_INBOUND_i",
fields LWR_TARGET_RW and LWR_TARGET_HW both state that:
"Field size depends on log2(BAR_MASK+1) in BAR match mode."
I.e. only the upper bits are writable, and the number of writable bits is
dependent on the configured BAR_MASK.
If we do not write the BAR_MASK before writing the iATU registers, we are
relying the reset value of the BAR_MASK being larger than the requested
BAR size (which is supplied in the struct pci_epf_bar which is passed to
pci_epc_set_bar()). The reset value of the BAR_MASK is SoC dependent.
Thus, if the struct pci_epf_bar requests a BAR size that is larger than the
reset value of the BAR_MASK, the iATU will try to write to read-only bits,
which will cause the iATU to end up redirecting to a physical address that
is different from the address that was intended.
Thus, we should always write the iATU registers after writing the BAR_MASK.
Fixes: f8aed6ec624f ("PCI: dwc: designware: Add EP mode support")
Link: https://lore.kernel.org/r/20241213143301.4158431-9-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: stable@vger.kernel.org
|
|
After 17423360a27a ("PCI/ASPM: Save L1 PM Substates Capability for
suspend/resume"), pci_save_aspm_l1ss_state(dev) saves the L1SS state for
"dev", and pci_restore_aspm_l1ss_state(dev) restores the state for both
"dev" and its parent.
The problem is that unless pci_save_state() has been used in some other
path and has already saved the parent L1SS state, we will restore junk to
the parent, which means the L1 Substates likely won't work correctly.
Save the L1SS config for both the device and its parent in
pci_save_aspm_l1ss_state(). When restoring, we need both because L1SS must
be enabled at the parent (the Downstream Port) before being enabled at the
child (the Upstream Port).
Link: https://lore.kernel.org/r/20241115072200.37509-3-jhp@endlessos.org
Fixes: 17423360a27a ("PCI/ASPM: Save L1 PM Substates Capability for suspend/resume")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218394
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
[bhelgaas: parallel save/restore structure, simplify commit log, patch at
https://lore.kernel.org/r/20241212230340.GA3267194@bhelgaas]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jian-Hong Pan <jhp@endlessos.org> # Asus B1400CEAE
|
|
When removing a virtual Endpoint, pci_epf_remove_vepf() failed to clear
epf_vf->epf_pf, which caused a subsequent pci_epf_add_vepf() to incorrectly
return -EBUSY:
pci_epf_add_vepf(epf_pf, epf_vf) // add
pci_epf_remove_vepf(epf_pf, epf_vf) // remove
pci_epf_add_vepf(epf_pf, epf_vf) // add again, -EBUSY error
Fix by clearing epf_vf->epf_pf in pci_epf_remove_vepf().
Link: https://lore.kernel.org/r/20241210-pci-epc-core_fix-v3-3-4d86dd573e4b@quicinc.com
Fixes: 1cf362e907f3 ("PCI: endpoint: Add support to add virtual function in endpoint core")
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable@vger.kernel.org
|
|
Simplify pci_epc_get() implementation by using class_find_device_by_name().
Link: https://lore.kernel.org/r/20241210-pci-epc-core_fix-v3-2-4d86dd573e4b@quicinc.com
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
|
