summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-06-22bpf: Fix null ptr deref with mixed tail calls and subprogsJohn Fastabend
The sub-programs prog->aux->poke_tab[] is populated in jit_subprogs() and then used when emitting 'BPF_JMP|BPF_TAIL_CALL' insn->code from the individual JITs. The poke_tab[] to use is stored in the insn->imm by the code adding it to that array slot. The JIT then uses imm to find the right entry for an individual instruction. In the x86 bpf_jit_comp.c this is done by calling emit_bpf_tail_call_direct with the poke_tab[] of the imm value. However, we observed the below null-ptr-deref when mixing tail call programs with subprog programs. For this to happen we just need to mix bpf-2-bpf calls and tailcalls with some extra calls or instructions that would be patched later by one of the fixup routines. So whats happening? Before the fixup_call_args() -- where the jit op is done -- various code patching is done by do_misc_fixups(). This may increase the insn count, for example when we patch map_lookup_up using map_gen_lookup hook. This does two things. First, it means the instruction index, insn_idx field, of a tail call instruction will move by a 'delta'. In verifier code, struct bpf_jit_poke_descriptor desc = { .reason = BPF_POKE_REASON_TAIL_CALL, .tail_call.map = BPF_MAP_PTR(aux->map_ptr_state), .tail_call.key = bpf_map_key_immediate(aux), .insn_idx = i + delta, }; Then subprog start values subprog_info[i].start will be updated with the delta and any poke descriptor index will also be updated with the delta in adjust_poke_desc(). If we look at the adjust subprog starts though we see its only adjusted when the delta occurs before the new instructions, /* NOTE: fake 'exit' subprog should be updated as well. */ for (i = 0; i <= env->subprog_cnt; i++) { if (env->subprog_info[i].start <= off) continue; Earlier subprograms are not changed because their start values are not moved. But, adjust_poke_desc() does the offset + delta indiscriminately. The result is poke descriptors are potentially corrupted. Then in jit_subprogs() we only populate the poke_tab[] when the above insn_idx is less than the next subprogram start. From above we corrupted our insn_idx so we might incorrectly assume a poke descriptor is not used in a subprogram omitting it from the subprogram. And finally when the jit runs it does the deref of poke_tab when emitting the instruction and crashes with below. Because earlier step omitted the poke descriptor. The fix is straight forward with above context. Simply move same logic from adjust_subprog_starts() into adjust_poke_descs() and only adjust insn_idx when needed. [ 82.396354] bpf_testmod: version magic '5.12.0-rc2alu+ SMP preempt mod_unload ' should be '5.12.0+ SMP preempt mod_unload ' [ 82.623001] loop10: detected capacity change from 0 to 8 [ 88.487424] ================================================================== [ 88.487438] BUG: KASAN: null-ptr-deref in do_jit+0x184a/0x3290 [ 88.487455] Write of size 8 at addr 0000000000000008 by task test_progs/5295 [ 88.487471] CPU: 7 PID: 5295 Comm: test_progs Tainted: G I 5.12.0+ #386 [ 88.487483] Hardware name: Dell Inc. Precision 5820 Tower/002KVM, BIOS 1.9.2 01/24/2019 [ 88.487490] Call Trace: [ 88.487498] dump_stack+0x93/0xc2 [ 88.487515] kasan_report.cold+0x5f/0xd8 [ 88.487530] ? do_jit+0x184a/0x3290 [ 88.487542] do_jit+0x184a/0x3290 ... [ 88.487709] bpf_int_jit_compile+0x248/0x810 ... [ 88.487765] bpf_check+0x3718/0x5140 ... [ 88.487920] bpf_prog_load+0xa22/0xf10 Fixes: a748c6975dea3 ("bpf: propagate poke descriptors to subprograms") Reported-by: Jussi Maki <joamaki@gmail.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Daniel Borkmann <daniel@iogearbox.net>
2021-06-22bpf: Fix integer overflow in argument calculation for bpf_map_area_allocBui Quang Minh
In 32-bit architecture, the result of sizeof() is a 32-bit integer so the expression becomes the multiplication between 2 32-bit integer which can potentially leads to integer overflow. As a result, bpf_map_area_alloc() allocates less memory than needed. Fix this by casting 1 operand to u64. Fixes: 0d2c4f964050 ("bpf: Eliminate rlimit-based memory accounting for sockmap and sockhash maps") Fixes: 99c51064fb06 ("devmap: Use bpf_map_area_alloc() for allocating hash buckets") Fixes: 546ac1ffb70d ("bpf: add devmap, a map for storing net device references") Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210613143440.71975-1-minhquangbui99@gmail.com
2021-06-22bpf: Fix regression on BPF_OBJ_GET with non-O_RDWR flagsMaciej Żenczykowski
This reverts commit d37300ed1821 ("bpf: program: Refuse non-O_RDWR flags in BPF_OBJ_GET"). It breaks Android userspace which expects to be able to fetch programs with just read permissions. See: https://cs.android.com/android/platform/superproject/+/master:frameworks/libs/net/common/native/bpf_syscall_wrappers/include/BpfSyscallWrappers.h;drc=7005c764be23d31fa1d69e826b4a2f6689a8c81e;l=124 Side-note: another option to fix it would be to extend bpf_prog_new_fd() and to pass in used file mode flags in the same way as we do for maps via bpf_map_new_fd(). Meaning, they'd end up in anon_inode_getfd() and thus would be retained for prog fd operations with bpf() syscall. Right now these flags are not checked with progs since they are immutable for their lifetime (as opposed to maps which can be updated from user space). In future this could potentially change with new features, but at that point it's still fine to do the bpf_prog_new_fd() extension when needed. For a simple stable fix, a revert is less churn. Fixes: d37300ed1821 ("bpf: program: Refuse non-O_RDWR flags in BPF_OBJ_GET") Signed-off-by: Maciej Żenczykowski <maze@google.com> [ Daniel: added side-note to commit message ] Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@cloudflare.com> Acked-by: Greg Kroah-Hartman <gregkh@google.com> Link: https://lore.kernel.org/bpf/20210618105526.265003-1-zenczykowski@gmail.com
2021-06-21skmsg: Increase sk->sk_drops when dropping packetsCong Wang
It is hard to observe packet drops without increasing relevant drop counters, here we should increase sk->sk_drops which is a protocol-independent counter. Fortunately psock is always associated with a struct sock, we can just use psock->sk. Suggested-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20210615021342.7416-9-xiyou.wangcong@gmail.com
2021-06-21skmsg: Pass source psock to sk_psock_skb_redirect()Cong Wang
sk_psock_skb_redirect() only takes skb as a parameter, we will need to know where this skb is from, so just pass the source psock to this function as a new parameter. This patch prepares for the next one. Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20210615021342.7416-8-xiyou.wangcong@gmail.com
2021-06-21skmsg: Teach sk_psock_verdict_apply() to return errorsCong Wang
Currently sk_psock_verdict_apply() is void, but it handles some error conditions too. Its caller is impossible to learn whether it succeeds or fails, especially sk_psock_verdict_recv(). Make it return int to indicate error cases and propagate errors to callers properly. Fixes: ef5659280eb1 ("bpf, sockmap: Allow skipping sk_skb parser program") Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20210615021342.7416-7-xiyou.wangcong@gmail.com
2021-06-21skmsg: Fix a memory leak in sk_psock_verdict_apply()Cong Wang
If the dest psock does not set SK_PSOCK_TX_ENABLED, the skb can't be queued anywhere so must be dropped. This one is found during code review. Fixes: 799aa7f98d53 ("skmsg: Avoid lock_sock() in sk_psock_backlog()") Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20210615021342.7416-6-xiyou.wangcong@gmail.com
2021-06-21skmsg: Clear skb redirect pointer before dropping itCong Wang
When we drop skb inside sk_psock_skb_redirect(), we have to clear its skb->_sk_redir pointer too, otherwise kfree_skb() would misinterpret it as a valid skb->_skb_refdst and dst_release() would eventually complain. Fixes: e3526bb92a20 ("skmsg: Move sk_redir from TCP_SKB_CB to skb") Reported-by: Jiang Wang <jiang.wang@bytedance.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20210615021342.7416-5-xiyou.wangcong@gmail.com
2021-06-21udp: Fix a memory leak in udp_read_sock()Cong Wang
sk_psock_verdict_recv() clones the skb and uses the clone afterward, so udp_read_sock() should free the skb after using it, regardless of error or not. This fixes a real kmemleak. Fixes: d7f571188ecf ("udp: Implement ->read_sock() for sockmap") Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20210615021342.7416-4-xiyou.wangcong@gmail.com
2021-06-21selftests/bpf: Retry for EAGAIN in udp_redir_to_connected()Cong Wang
We use non-blocking sockets for testing sockmap redirections, and got some random EAGAIN errors from UDP tests. There is no guarantee the packet would be immediately available to receive as soon as it is sent out, even on the local host. For UDP, this is especially true because it does not lock the sock during BH (unlike the TCP path). This is probably why we only saw this error in UDP cases. No matter how hard we try to make the queue empty check accurate, it is always possible for recvmsg() to beat ->sk_data_ready(). Therefore, we should just retry in case of EAGAIN. Fixes: d6378af615275 ("selftests/bpf: Add a test case for udp sockmap") Reported-by: Jiang Wang <jiang.wang@bytedance.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20210615021342.7416-3-xiyou.wangcong@gmail.com
2021-06-21skmsg: Improve udp_bpf_recvmsg() accuracyCong Wang
I tried to reuse sk_msg_wait_data() for different protocols, but it turns out it can not be simply reused. For example, UDP actually uses two queues to receive skb: udp_sk(sk)->reader_queue and sk->sk_receive_queue. So we have to check both of them to know whether we have received any packet. Also, UDP does not lock the sock during BH Rx path, it makes no sense for its ->recvmsg() to lock the sock. It is always possible for ->recvmsg() to be called before packets actually arrive in the receive queue, we just use best effort to make it accurate here. Fixes: 1f5be6b3b063 ("udp: Implement udp_bpf_recvmsg() for sockmap") Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20210615021342.7416-2-xiyou.wangcong@gmail.com
2021-06-18bpf: Fix libelf endian handling in resolv_btfidsTony Ambardar
The vmlinux ".BTF_ids" ELF section is declared in btf_ids.h to hold a list of zero-filled BTF IDs, which is then patched at link-time with correct values by resolv_btfids. The section is flagged as "allocable" to preclude compression, but notably the section contents (BTF IDs) are untyped. When patching the BTF IDs, resolve_btfids writes in host-native endianness and relies on libelf for any required translation on reading and updating vmlinux. However, since the type of the .BTF_ids section content defaults to ELF_T_BYTE (i.e. unsigned char), no translation occurs. This results in incorrect patched values when cross-compiling to non-native endianness, and can manifest as kernel Oops and test failures which are difficult to troubleshoot [1]. Explicitly set the type of patched data to ELF_T_WORD, the architecture- neutral ELF type corresponding to the u32 BTF IDs. This enables libelf to transparently perform any needed endian conversions. Fixes: fbbb68de80a4 ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object") Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Frank Eigler <fche@redhat.com> Cc: Mark Wielaard <mark@klomp.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/CAPGftE_eY-Zdi3wBcgDfkz_iOr1KF10n=9mJHm1_a_PykcsoeA@mail.gmail.com [1] Link: https://lore.kernel.org/bpf/20210618061404.818569-1-Tony.Ambardar@gmail.com
2021-06-18xsk: Fix broken Tx ring validationMagnus Karlsson
Fix broken Tx ring validation for AF_XDP. The commit under the Fixes tag, fixed an off-by-one error in the validation but introduced another error. Descriptors are now let through even if they straddle a chunk boundary which they are not allowed to do in aligned mode. Worse is that they are let through even if they straddle the end of the umem itself, tricking the kernel to read data outside the allowed umem region which might or might not be mapped at all. Fix this by reintroducing the old code, but subtract the length by one to fix the off-by-one error that the original patch was addressing. The test chunk != chunk_end makes sure packets do not straddle chunk boundraries. Note that packets of zero length are allowed in the interface, therefore the test if the length is non-zero. Fixes: ac31565c2193 ("xsk: Fix for xp_aligned_validate_desc() when len == chunk_size") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Björn Töpel <bjorn@kernel.org> Link: https://lore.kernel.org/bpf/20210618075805.14412-1-magnus.karlsson@gmail.com
2021-06-18xsk: Fix missing validation for skb and unaligned modeMagnus Karlsson
Fix a missing validation of a Tx descriptor when executing in skb mode and the umem is in unaligned mode. A descriptor could point to a buffer straddling the end of the umem, thus effectively tricking the kernel to read outside the allowed umem region. This could lead to a kernel crash if that part of memory is not mapped. In zero-copy mode, the descriptor validation code rejects such descriptors by checking a bit in the DMA address that tells us if the next page is physically contiguous or not. For the last page in the umem, this bit is not set, therefore any descriptor pointing to a packet straddling this last page boundary will be rejected. However, the skb path does not use this bit since it copies out data and can do so to two different pages. (It also does not have the array of DMA address, so it cannot even store this bit.) The code just returned that the packet is always physically contiguous. But this is unfortunately also returned for the last page in the umem, which means that packets that cross the end of the umem are being allowed, which they should not be. Fix this by introducing a check for this in the SKB path only, not penalizing the zero-copy path. Fixes: 2b43470add8c ("xsk: Introduce AF_XDP buffer allocation API") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Björn Töpel <bjorn@kernel.org> Link: https://lore.kernel.org/bpf/20210617092255.3487-1-magnus.karlsson@gmail.com
2021-06-17net: qed: Fix memcpy() overflow of qed_dcbx_params()Kees Cook
The source (&dcbx_info->operational.params) and dest (&p_hwfn->p_dcbx_info->set.config.params) are both struct qed_dcbx_params (560 bytes), not struct qed_dcbx_admin_params (564 bytes), which is used as the memcpy() size. However it seems that struct qed_dcbx_operational_params (dcbx_info->operational)'s layout matches struct qed_dcbx_admin_params (p_hwfn->p_dcbx_info->set.config)'s 4 byte difference (3 padding, 1 byte for "valid"). On the assumption that the size is wrong (rather than the source structure type), adjust the memcpy() size argument to be 4 bytes smaller and add a BUILD_BUG_ON() to validate any changes to the structure sizes. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-17net: cdc_eem: fix tx fixup skb leakLinyu Yuan
when usbnet transmit a skb, eem fixup it in eem_tx_fixup(), if skb_copy_expand() failed, it return NULL, usbnet_start_xmit() will have no chance to free original skb. fix it by free orginal skb in eem_tx_fixup() first, then check skb clone status, if failed, return NULL to usbnet. Fixes: 9f722c0978b0 ("usbnet: CDC EEM support (v5)") Signed-off-by: Linyu Yuan <linyyuan@codeaurora.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-17Merge tag 'mlx5-fixes-2021-06-16' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2021-06-16 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-17net: hamradio: fix memory leak in mkiss_closePavel Skripkin
My local syzbot instance hit memory leak in mkiss_open()[1]. The problem was in missing free_netdev() in mkiss_close(). In mkiss_open() netdevice is allocated and then registered, but in mkiss_close() netdevice was only unregistered, but not freed. Fail log: BUG: memory leak unreferenced object 0xffff8880281ba000 (size 4096): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 61 78 30 00 00 00 00 00 00 00 00 00 00 00 00 00 ax0............. 00 27 fa 2a 80 88 ff ff 00 00 00 00 00 00 00 00 .'.*............ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706e7e8>] alloc_netdev_mqs+0x98/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff8880141a9a00 (size 96): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): e8 a2 1b 28 80 88 ff ff e8 a2 1b 28 80 88 ff ff ...(.......(.... 98 92 9c aa b0 40 02 00 00 00 00 00 00 00 00 00 .....@.......... backtrace: [<ffffffff8709f68b>] __hw_addr_create_ex+0x5b/0x310 [<ffffffff8709fb38>] __hw_addr_add_ex+0x1f8/0x2b0 [<ffffffff870a0c7b>] dev_addr_init+0x10b/0x1f0 [<ffffffff8706e88b>] alloc_netdev_mqs+0x13b/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff8880219bfc00 (size 512): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 00 a0 1b 28 80 88 ff ff 80 8f b1 8d ff ff ff ff ...(............ 80 8f b1 8d ff ff ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706eec7>] alloc_netdev_mqs+0x777/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff888029b2b200 (size 256): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706f062>] alloc_netdev_mqs+0x912/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 815f62bf7427 ("[PATCH] SMP rewrite of mkiss") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-17be2net: Fix an error handling path in 'be_probe()'Christophe JAILLET
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: d6b6d9877878 ("be2net: use PCIe AER capability") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net/mlx5: Reset mkey index on creationAya Levin
Reset only the index part of the mkey and keep the variant part. On devlink reload, driver recreates mkeys, so the mkey index may change. Trying to preserve the variant part of the mkey, driver mistakenly merged the mkey index with current value. In case of a devlink reload, current value of index part is dirty, so the index may be corrupted. Fixes: 54c62e13ad76 ("{IB,net}/mlx5: Setup mkey variant before mr create command invocation") Signed-off-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Amir Tzin <amirtz@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-16net/mlx5e: Don't create devices during unload flowDmytro Linkin
Running devlink reload command for port in switchdev mode cause resources to corrupt: driver can't release allocated EQ and reclaim memory pages, because "rdma" auxiliary device had add CQs which blocks EQ from deletion. Erroneous sequence happens during reload-down phase, and is following: 1. detach device - suspends auxiliary devices which support it, destroys others. During this step "eth-rep" and "rdma-rep" are destroyed, "eth" - suspended. 2. disable SRIOV - moves device to legacy mode; as part of disablement - rescans drivers. This step adds "rdma" auxiliary device. 3. destroy EQ table - <failure>. Driver shouldn't create any device during unload flows. To handle that implement MLX5_PRIV_FLAGS_DETACH flag, set it on device detach and unset on device attach. If flag is set do no-op on drivers rescan. Fixes: a925b5e309c9 ("net/mlx5: Register mlx5 devices to auxiliary virtual bus") Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-16net/mlx5: DR, Fix STEv1 incorrect L3 decapsulation paddingAlex Vesker
Decapsulation L3 on small inner packets which are less than 64 Bytes was done incorrectly. In small packets there is an extra padding added in L2 which should not be included in L3 length. The issue was that after decapL3 the extra L2 padding caused an update on the L3 length. To avoid this issue the new header is pushed to the beginning of the packet (offset 0) which should not cause a HW reparse and update the L3 length. Fixes: c349b4137cfd ("net/mlx5: DR, Add STEv1 modify header logic") Reviewed-by: Erez Shitrit <erezsh@nvidia.com> Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-16net/mlx5: SF_DEV, remove SF device on invalid stateParav Pandit
When auxiliary bus autoprobe is disabled and SF is in ACTIVE state, on SF port deletion it transitions from ACTIVE->ALLOCATED->INVALID. When VHCA event handler queries the state, it is already transition to INVALID state. In this scenario, event handler missed to delete the SF device. Fix it by deleting the SF when SF state is INVALID. Fixes: 90d010b8634b ("net/mlx5: SF, Add auxiliary device support") Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Vu Pham <vuhuong@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-16net/mlx5: E-Switch, Allow setting GUID for host PF vportParav Pandit
E-switch should be able to set the GUID of host PF vport. Currently it returns an error. This results in below error when user attempts to configure MAC address of the PF of an external controller. $ devlink port function set pci/0000:03:00.0/196608 \ hw_addr 00:00:00:11:22:33 mlx5_core 0000:03:00.0: mlx5_esw_set_vport_mac_locked:1876:(pid 6715):\ "Failed to set vport 0 node guid, err = -22. RDMA_CM will not function properly for this VF." Check for zero vport is no longer needed. Fixes: 330077d14de1 ("net/mlx5: E-switch, Supporting setting devlink port function mac address") Signed-off-by: Yuval Avnery <yuvalav@nvidia.com> Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Bodong Wang <bodong@nvidia.com> Reviewed-by: Alaa Hleihel <alaa@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-16net/mlx5: E-Switch, Read PF mac addressParav Pandit
External controller PF's MAC address is not read from the device during vport setup. Fail to read this results in showing all zeros to user while the factory programmed MAC is a valid value. $ devlink port show eth1 -jp { "port": { "pci/0000:03:00.0/196608": { "type": "eth", "netdev": "eth1", "flavour": "pcipf", "controller": 1, "pfnum": 0, "splittable": false, "function": { "hw_addr": "00:00:00:00:00:00" } } } } Hence, read it when enabling a vport. After the fix, $ devlink port show eth1 -jp { "port": { "pci/0000:03:00.0/196608": { "type": "eth", "netdev": "eth1", "flavour": "pcipf", "controller": 1, "pfnum": 0, "splittable": false, "function": { "hw_addr": "98:03:9b:a0:60:11" } } } } Fixes: f099fde16db3 ("net/mlx5: E-switch, Support querying port function mac address") Signed-off-by: Bodong Wang <bodong@nvidia.com> Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Alaa Hleihel <alaa@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-16net/mlx5: Check that driver was probed prior attaching the deviceLeon Romanovsky
The device can be requested to be attached despite being not probed. This situation is possible if devlink reload races with module removal, and the following kernel panic is an outcome of such race. mlx5_core 0000:00:09.0: firmware version: 4.7.9999 mlx5_core 0000:00:09.0: 0.000 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x255 link) BUG: unable to handle page fault for address: fffffffffffffff0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 3218067 P4D 3218067 PUD 321a067 PMD 0 Oops: 0000 [#1] SMP KASAN NOPTI CPU: 7 PID: 250 Comm: devlink Not tainted 5.12.0-rc2+ #2836 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5_attach_device+0x80/0x280 [mlx5_core] Code: f8 48 c1 e8 03 42 80 3c 38 00 0f 85 80 01 00 00 48 8b 45 68 48 8d 78 f0 48 89 fe 48 c1 ee 03 42 80 3c 3e 00 0f 85 70 01 00 00 <48> 8b 40 f0 48 85 c0 74 0d 48 89 ef ff d0 85 c0 0f 85 84 05 0e 00 RSP: 0018:ffff8880129675f0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffffffff827407f1 RDX: 1ffff110011336cf RSI: 1ffffffffffffffe RDI: fffffffffffffff0 RBP: ffff888008e0c000 R08: 0000000000000008 R09: ffffffffa0662ee7 R10: fffffbfff40cc5dc R11: 0000000000000000 R12: ffff88800ea002e0 R13: ffffed1001d459f7 R14: ffffffffa05ef4f8 R15: dffffc0000000000 FS: 00007f51dfeaf740(0000) GS:ffff88806d5c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffffffffffff0 CR3: 000000000bc82006 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: mlx5_load_one+0x117/0x1d0 [mlx5_core] devlink_reload+0x2d5/0x520 ? devlink_remote_reload_actions_performed+0x30/0x30 ? mutex_trylock+0x24b/0x2d0 ? devlink_nl_cmd_reload+0x62b/0x1070 devlink_nl_cmd_reload+0x66d/0x1070 ? devlink_reload+0x520/0x520 ? devlink_nl_pre_doit+0x64/0x4d0 genl_family_rcv_msg_doit+0x1e9/0x2f0 ? mutex_lock_io_nested+0x1130/0x1130 ? genl_family_rcv_msg_attrs_parse.constprop.0+0x240/0x240 ? security_capable+0x51/0x90 genl_rcv_msg+0x27f/0x4a0 ? genl_get_cmd+0x3c0/0x3c0 ? lock_acquire+0x1a9/0x6d0 ? devlink_reload+0x520/0x520 ? lock_release+0x6c0/0x6c0 netlink_rcv_skb+0x11d/0x340 ? genl_get_cmd+0x3c0/0x3c0 ? netlink_ack+0x9f0/0x9f0 ? lock_release+0x1f9/0x6c0 genl_rcv+0x24/0x40 netlink_unicast+0x433/0x700 ? netlink_attachskb+0x730/0x730 ? _copy_from_iter_full+0x178/0x650 ? __alloc_skb+0x113/0x2b0 netlink_sendmsg+0x6f1/0xbd0 ? netlink_unicast+0x700/0x700 ? netlink_unicast+0x700/0x700 sock_sendmsg+0xb0/0xe0 __sys_sendto+0x193/0x240 ? __x64_sys_getpeername+0xb0/0xb0 ? copy_page_range+0x2300/0x2300 ? __up_read+0x1a1/0x7b0 ? do_user_addr_fault+0x219/0xdc0 __x64_sys_sendto+0xdd/0x1b0 ? syscall_enter_from_user_mode+0x1d/0x50 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f51dffb514a Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 76 c3 0f 1f 44 00 00 55 48 83 ec 30 44 89 4c RSP: 002b:00007ffcaef22e78 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f51dffb514a RDX: 0000000000000030 RSI: 000055750daf2440 RDI: 0000000000000003 RBP: 000055750daf2410 R08: 00007f51e0081200 R09: 000000000000000c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: mlx5_core(-) ptp pps_core ib_ipoib rdma_ucm rdma_cm iw_cm ib_cm ib_umad ib_uverbs ib_core [last unloaded: mlx5_ib] CR2: fffffffffffffff0 ---[ end trace 7789831bfe74fa42 ]--- Fixes: a925b5e309c9 ("net/mlx5: Register mlx5 devices to auxiliary virtual bus") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-16net/mlx5: Fix error path for set HCA defaultsLeon Romanovsky
In the case of the failure to execute mlx5_core_set_hca_defaults(), we used wrong goto label to execute error unwind flow. Fixes: 5bef709d76a2 ("net/mlx5: Enable host PF HCA after eswitch is initialized") Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-16r8169: Avoid memcpy() over-reading of ETH_SS_STATSKees Cook
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally reading across neighboring array fields. The memcpy() is copying the entire structure, not just the first array. Adjust the source argument so the compiler can do appropriate bounds checking. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16sh_eth: Avoid memcpy() over-reading of ETH_SS_STATSKees Cook
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally reading across neighboring array fields. The memcpy() is copying the entire structure, not just the first array. Adjust the source argument so the compiler can do appropriate bounds checking. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16r8152: Avoid memcpy() over-reading of ETH_SS_STATSKees Cook
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally reading across neighboring array fields. The memcpy() is copying the entire structure, not just the first array. Adjust the source argument so the compiler can do appropriate bounds checking. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16selftests: net: use bash to run udpgro_fwd test caseAndrea Righi
udpgro_fwd.sh contains many bash specific operators ("[[", "local -r"), but it's using /bin/sh; in some distro /bin/sh is mapped to /bin/dash, that doesn't support such operators. Force the test to use /bin/bash explicitly and prevent false positive test failures. Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net/af_unix: fix a data-race in unix_dgram_sendmsg / unix_release_sockEric Dumazet
While unix_may_send(sk, osk) is called while osk is locked, it appears unix_release_sock() can overwrite unix_peer() after this lock has been released, making KCSAN unhappy. Changing unix_release_sock() to access/change unix_peer() before lock is released should fix this issue. BUG: KCSAN: data-race in unix_dgram_sendmsg / unix_release_sock write to 0xffff88810465a338 of 8 bytes by task 20852 on cpu 1: unix_release_sock+0x4ed/0x6e0 net/unix/af_unix.c:558 unix_release+0x2f/0x50 net/unix/af_unix.c:859 __sock_release net/socket.c:599 [inline] sock_close+0x6c/0x150 net/socket.c:1258 __fput+0x25b/0x4e0 fs/file_table.c:280 ____fput+0x11/0x20 fs/file_table.c:313 task_work_run+0xae/0x130 kernel/task_work.c:164 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop kernel/entry/common.c:175 [inline] exit_to_user_mode_prepare+0x156/0x190 kernel/entry/common.c:209 __syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline] syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:302 do_syscall_64+0x56/0x90 arch/x86/entry/common.c:57 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff88810465a338 of 8 bytes by task 20888 on cpu 0: unix_may_send net/unix/af_unix.c:189 [inline] unix_dgram_sendmsg+0x923/0x1610 net/unix/af_unix.c:1712 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350 ___sys_sendmsg net/socket.c:2404 [inline] __sys_sendmmsg+0x315/0x4b0 net/socket.c:2490 __do_sys_sendmmsg net/socket.c:2519 [inline] __se_sys_sendmmsg net/socket.c:2516 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2516 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0xffff888167905400 -> 0x0000000000000000 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 20888 Comm: syz-executor.0 Not tainted 5.13.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16selftests: net: veth: make test compatible with dashAndrea Righi
veth.sh is a shell script that uses /bin/sh; some distro (Ubuntu for example) use dash as /bin/sh and in this case the test reports the following error: # ./veth.sh: 21: local: -r: bad variable name # ./veth.sh: 21: local: -r: bad variable name This happens because dash doesn't support the option "-r" with local. Moreover, in case of missing bpf object, the script is exiting -1, that is an illegal number for dash: exit: Illegal number: -1 Change the script to be compatible both with bash and dash and prevent the errors above. Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16Merge branch 'net-packet-data-races'David S. Miller
Eric Dumazet says: ==================== net/packet: annotate data races KCSAN sent two reports about data races in af_packet. Nothing serious, but worth fixing. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net/packet: annotate accesses to po->ifindexEric Dumazet
Like prior patch, we need to annotate lockless accesses to po->ifindex For instance, packet_getname() is reading po->ifindex (twice) while another thread is able to change po->ifindex. KCSAN reported: BUG: KCSAN: data-race in packet_do_bind / packet_getname write to 0xffff888143ce3cbc of 4 bytes by task 25573 on cpu 1: packet_do_bind+0x420/0x7e0 net/packet/af_packet.c:3191 packet_bind+0xc3/0xd0 net/packet/af_packet.c:3255 __sys_bind+0x200/0x290 net/socket.c:1637 __do_sys_bind net/socket.c:1648 [inline] __se_sys_bind net/socket.c:1646 [inline] __x64_sys_bind+0x3d/0x50 net/socket.c:1646 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888143ce3cbc of 4 bytes by task 25578 on cpu 0: packet_getname+0x5b/0x1a0 net/packet/af_packet.c:3525 __sys_getsockname+0x10e/0x1a0 net/socket.c:1887 __do_sys_getsockname net/socket.c:1902 [inline] __se_sys_getsockname net/socket.c:1899 [inline] __x64_sys_getsockname+0x3e/0x50 net/socket.c:1899 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000000 -> 0x00000001 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 25578 Comm: syz-executor.5 Not tainted 5.13.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net/packet: annotate accesses to po->bindEric Dumazet
tpacket_snd(), packet_snd(), packet_getname() and packet_seq_show() can read po->num without holding a lock. This means other threads can change po->num at the same time. KCSAN complained about this known fact [1] Add READ_ONCE()/WRITE_ONCE() to address the issue. [1] BUG: KCSAN: data-race in packet_do_bind / packet_sendmsg write to 0xffff888131a0dcc0 of 2 bytes by task 24714 on cpu 0: packet_do_bind+0x3ab/0x7e0 net/packet/af_packet.c:3181 packet_bind+0xc3/0xd0 net/packet/af_packet.c:3255 __sys_bind+0x200/0x290 net/socket.c:1637 __do_sys_bind net/socket.c:1648 [inline] __se_sys_bind net/socket.c:1646 [inline] __x64_sys_bind+0x3d/0x50 net/socket.c:1646 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888131a0dcc0 of 2 bytes by task 24719 on cpu 1: packet_snd net/packet/af_packet.c:2899 [inline] packet_sendmsg+0x317/0x3570 net/packet/af_packet.c:3040 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350 ___sys_sendmsg net/socket.c:2404 [inline] __sys_sendmsg+0x1ed/0x270 net/socket.c:2433 __do_sys_sendmsg net/socket.c:2442 [inline] __se_sys_sendmsg net/socket.c:2440 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2440 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x0000 -> 0x1200 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 24719 Comm: syz-executor.5 Not tainted 5.13.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16Merge tag 'linux-can-fixes-for-5.13-20210616' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2021-06-16 this is a pull request of 4 patches for net/master. The first patch is by Oleksij Rempel and fixes a Use-after-Free found by syzbot in the j1939 stack. The next patch is by Tetsuo Handa and fixes hung task detected by syzbot in the bcm, raw and isotp protocols. Norbert Slusarek's patch fixes a infoleak in bcm's struct bcm_msg_head. Pavel Skripkin's patch fixes a memory leak in the mcba_usb driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: ipv4: fix memory leak in ip_mc_add1_srcChengyang Fan
BUG: memory leak unreferenced object 0xffff888101bc4c00 (size 32): comm "syz-executor527", pid 360, jiffies 4294807421 (age 19.329s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 01 00 00 00 00 00 00 00 ac 14 14 bb 00 00 02 00 ................ backtrace: [<00000000f17c5244>] kmalloc include/linux/slab.h:558 [inline] [<00000000f17c5244>] kzalloc include/linux/slab.h:688 [inline] [<00000000f17c5244>] ip_mc_add1_src net/ipv4/igmp.c:1971 [inline] [<00000000f17c5244>] ip_mc_add_src+0x95f/0xdb0 net/ipv4/igmp.c:2095 [<000000001cb99709>] ip_mc_source+0x84c/0xea0 net/ipv4/igmp.c:2416 [<0000000052cf19ed>] do_ip_setsockopt net/ipv4/ip_sockglue.c:1294 [inline] [<0000000052cf19ed>] ip_setsockopt+0x114b/0x30c0 net/ipv4/ip_sockglue.c:1423 [<00000000477edfbc>] raw_setsockopt+0x13d/0x170 net/ipv4/raw.c:857 [<00000000e75ca9bb>] __sys_setsockopt+0x158/0x270 net/socket.c:2117 [<00000000bdb993a8>] __do_sys_setsockopt net/socket.c:2128 [inline] [<00000000bdb993a8>] __se_sys_setsockopt net/socket.c:2125 [inline] [<00000000bdb993a8>] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2125 [<000000006a1ffdbd>] do_syscall_64+0x40/0x80 arch/x86/entry/common.c:47 [<00000000b11467c4>] entry_SYSCALL_64_after_hwframe+0x44/0xae In commit 24803f38a5c0 ("igmp: do not remove igmp souce list info when set link down"), the ip_mc_clear_src() in ip_mc_destroy_dev() was removed, because it was also called in igmpv3_clear_delrec(). Rough callgraph: inetdev_destroy -> ip_mc_destroy_dev -> igmpv3_clear_delrec -> ip_mc_clear_src -> RCU_INIT_POINTER(dev->ip_ptr, NULL) However, ip_mc_clear_src() called in igmpv3_clear_delrec() doesn't release in_dev->mc_list->sources. And RCU_INIT_POINTER() assigns the NULL to dev->ip_ptr. As a result, in_dev cannot be obtained through inetdev_by_index() and then in_dev->mc_list->sources cannot be released by ip_mc_del1_src() in the sock_close. Rough call sequence goes like: sock_close -> __sock_release -> inet_release -> ip_mc_drop_socket -> inetdev_by_index -> ip_mc_leave_src -> ip_mc_del_src -> ip_mc_del1_src So we still need to call ip_mc_clear_src() in ip_mc_destroy_dev() to free in_dev->mc_list->sources. Fixes: 24803f38a5c0 ("igmp: do not remove igmp souce list info ...") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Chengyang Fan <cy.fan@huawei.com> Acked-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16Merge branch 'fec-ptp-fixes'David S. Miller
Joakim Zhang says: ==================== net: fixes for fec ptp Small fixes for fec ptp. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: fec_ptp: fix issue caused by refactor the fec_devtypeJoakim Zhang
Commit da722186f654 ("net: fec: set GPR bit on suspend by DT configuration.") refactor the fec_devtype, need adjust ptp driver accordingly. Fixes: da722186f654 ("net: fec: set GPR bit on suspend by DT configuration.") Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: fec_ptp: add clock rate zero checkFugang Duan
Add clock rate zero check to fix coverity issue of "divide by 0". Fixes: commit 85bd1798b24a ("net: fec: fix spin_lock dead lock") Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: usb: fix possible use-after-free in smsc75xx_bindDongliang Mu
The commit 46a8b29c6306 ("net: usb: fix memory leak in smsc75xx_bind") fails to clean up the work scheduled in smsc75xx_reset-> smsc75xx_set_multicast, which leads to use-after-free if the work is scheduled to start after the deallocation. In addition, this patch also removes a dangling pointer - dev->data[0]. This patch calls cancel_work_sync to cancel the scheduled work and set the dangling pointer to NULL. Fixes: 46a8b29c6306 ("net: usb: fix memory leak in smsc75xx_bind") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: stmmac: disable clocks in stmmac_remove_config_dt()Joakim Zhang
Platform drivers may call stmmac_probe_config_dt() to parse dt, could call stmmac_remove_config_dt() in error handing after dt parsed, so need disable clocks in stmmac_remove_config_dt(). Go through all platforms drivers which use stmmac_probe_config_dt(), none of them disable clocks manually, so it's safe to disable them in stmmac_remove_config_dt(). Fixes: commit d2ed0a7755fe ("net: ethernet: stmmac: fix of-node and fixed-link-phydev leaks") Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16can: mcba_usb: fix memory leak in mcba_usbPavel Skripkin
Syzbot reported memory leak in SocketCAN driver for Microchip CAN BUS Analyzer Tool. The problem was in unfreed usb_coherent. In mcba_usb_start() 20 coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see mcba_usb_start) and this flag cannot be used with coherent buffers. Fail log: | [ 1354.053291][ T8413] mcba_usb 1-1:0.0 can0: device disconnected | [ 1367.059384][ T8420] kmemleak: 20 new suspected memory leaks (see /sys/kernel/debug/kmem) So, all allocated buffers should be freed with usb_free_coherent() explicitly NOTE: The same pattern for allocating and freeing coherent buffers is used in drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer") Link: https://lore.kernel.org/r/20210609215833.30393-1-paskripkin@gmail.com Cc: linux-stable <stable@vger.kernel.org> Reported-and-tested-by: syzbot+57281c762a3922e14dfe@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-06-16can: bcm: fix infoleak in struct bcm_msg_headNorbert Slusarek
On 64-bit systems, struct bcm_msg_head has an added padding of 4 bytes between struct members count and ival1. Even though all struct members are initialized, the 4-byte hole will contain data from the kernel stack. This patch zeroes out struct bcm_msg_head before usage, preventing infoleaks to userspace. Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol") Link: https://lore.kernel.org/r/trinity-7c1b2e82-e34f-4885-8060-2cd7a13769ce-1623532166177@3c-app-gmx-bs52 Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Norbert Slusarek <nslusarek@gmx.net> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-06-16can: bcm/raw/isotp: use per module netdevice notifierTetsuo Handa
syzbot is reporting hung task at register_netdevice_notifier() [1] and unregister_netdevice_notifier() [2], for cleanup_net() might perform time consuming operations while CAN driver's raw/bcm/isotp modules are calling {register,unregister}_netdevice_notifier() on each socket. Change raw/bcm/isotp modules to call register_netdevice_notifier() from module's __init function and call unregister_netdevice_notifier() from module's __exit function, as with gw/j1939 modules are doing. Link: https://syzkaller.appspot.com/bug?id=391b9498827788b3cc6830226d4ff5be87107c30 [1] Link: https://syzkaller.appspot.com/bug?id=1724d278c83ca6e6df100a2e320c10d991cf2bce [2] Link: https://lore.kernel.org/r/54a5f451-05ed-f977-8534-79e7aa2bcc8f@i-love.sakura.ne.jp Cc: linux-stable <stable@vger.kernel.org> Reported-by: syzbot <syzbot+355f8edb2ff45d5f95fa@syzkaller.appspotmail.com> Reported-by: syzbot <syzbot+0f1827363a305f74996f@syzkaller.appspotmail.com> Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Tested-by: syzbot <syzbot+355f8edb2ff45d5f95fa@syzkaller.appspotmail.com> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-06-16can: j1939: fix Use-after-Free, hold skb ref while in useOleksij Rempel
This patch fixes a Use-after-Free found by the syzbot. The problem is that a skb is taken from the per-session skb queue, without incrementing the ref count. This leads to a Use-after-Free if the skb is taken concurrently from the session queue due to a CTS. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/r/20210521115720.7533-1-o.rempel@pengutronix.de Cc: Hillf Danton <hdanton@sina.com> Cc: linux-stable <stable@vger.kernel.org> Reported-by: syzbot+220c1a29987a9a490903@syzkaller.appspotmail.com Reported-by: syzbot+45199c1b73b4013525cf@syzkaller.appspotmail.com Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2021-06-15 The following pull-request contains BPF updates for your *net* tree. We've added 5 non-merge commits during the last 11 day(s) which contain a total of 10 files changed, 115 insertions(+), 16 deletions(-). The main changes are: 1) Fix marking incorrect umem ring as done in libbpf's xsk_socket__create_shared() helper, from Kev Jackson. 2) Fix oob leakage under a spectre v1 type confusion attack, from Daniel Borkmann. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15lantiq: net: fix duplicated skb in rx descriptor ringAleksander Jan Bajkowski
The previous commit didn't fix the bug properly. By mistake, it replaces the pointer of the next skb in the descriptor ring instead of the current one. As a result, the two descriptors are assigned the same SKB. The error is seen during the iperf test when skb_put tries to insert a second packet and exceeds the available buffer. Fixes: c7718ee96dbc ("net: lantiq: fix memory corruption in RX ring ") Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15qmi_wwan: Do not call netif_rx from rx_fixupKristian Evensen
When the QMI_WWAN_FLAG_PASS_THROUGH is set, netif_rx() is called from qmi_wwan_rx_fixup(). When the call to netif_rx() is successful (which is most of the time), usbnet_skb_return() is called (from rx_process()). usbnet_skb_return() will then call netif_rx() a second time for the same skb. Simplify the code and avoid the redundant netif_rx() call by changing qmi_wwan_rx_fixup() to always return 1 when QMI_WWAN_FLAG_PASS_THROUGH is set. We then leave it up to the existing infrastructure to call netif_rx(). Suggested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-09 09:00:04 +0000