| Age | Commit message (Collapse) | Author |
|---|
|
Add coverage for FPMR to fp-ptrace. FPMR can be available independently of
SVE and SME, if SME is supported then FPMR is cleared by entering and
exiting streaming mode. As with other registers we generate random values
to load into the register, we restrict these to bitfields which are always
defined. We also leave bitfields where the valid values are affected by
the set of supported FP8 formats zero to reduce complexity, it is unlikely
that specific bitfields will be affected by ptrace issues.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241112-arm64-fp-ptrace-fpmr-v2-3-250b57c61254@kernel.org
[catalin.marinas@arm.com: use REG_FPMR instead of FPMR]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently our test for implementable ZA writes is written in a bit of a
convoluted fashion which excludes all changes where we clear SVCR.SM even
though we can actually support that since changing the vector length resets
SVCR. Make the logic more direct, enabling us to actually run these cases.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241112-arm64-fp-ptrace-fpmr-v2-2-250b57c61254@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The assembler portions of fp-ptrace are passed feature flags by the C code
indicating which architectural features are supported. Currently these use
an entire register for each flag which is wasteful and gets cumbersome as
new flags are added. Switch to using flag bits in a single register to make
things easier to maintain.
No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241112-arm64-fp-ptrace-fpmr-v2-1-250b57c61254@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently we don't build the PAC selftests when building with LLVM=1 since
we attempt to test for PAC support in the toolchain before we've set up the
build system to point at LLVM in lib.mk, which has to be one of the last
things in the Makefile.
Since all versions of LLVM supported for use with the kernel have PAC
support we can just sidestep the issue by just assuming PAC is there when
doing a LLVM=1 build.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241111-arm64-selftest-pac-clang-v1-1-08599ceee418@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
We don't currently validate that we exit streaming mode and clear ZA when
we enter a signal handler. Add simple checks for this in the SSVE and ZA
tests.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241106-arm64-fpmr-signal-test-v1-1-31fa34ce58fe@kernel.org
[catalin.marinas@arm.com: Use %lx in fprintf() as uint64_t seems to be unsigned long in glibc]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The max9768 has a custom control for playback mute which unconditionally
returns 0 from the put() operation, rather than returning 1 on change to
ensure notifications are generated to userspace. Check to see if the value
has changed and return appropriately.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20241112-asoc-max9768-event-v1-1-ba5d50599787@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Since "res" will never be null, just delete this check.
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Link: https://patch.msgid.link/20241112081637.40962-1-zhangjiao2@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/regulator to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
A few whitespace changes are done en passant to make indention
consistent.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/ab85510f83fa901e44d5d563fe6e768054229bfe.1731398433.git.u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Simple Card Utils has simple_util_dai which is paired to snd_soc_dai,
and assmus that CPU/Codec DAI and its paired simple_util_dai are same
order for CPU/Codec
simple_util_dai[0] <--> snd_soc_dai[0]
simple_util_dai[1] <--> snd_soc_dai[1]
...
So, it is using same index in for_each loop.
(X) gets simple_util_dai
(Y) gets snd_soc_dai
(Y) for_each_rtd_cpu_dais(.., i, ..) {
(X)(A) udai = simple_props_to_dai_cpu(.., i);
}
(X) for_each_prop_dai_cpu(.., i, ...) {
(Y) dai = snd_soc_rtd_to_cpu(.., i);
...
}
But current Simple Card Utils didn't have simple_util_dai for
dummy DAI. So above (A) will get NULL pointer in such case.
This patch cares simple_util_dai for dummy DAI.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87msi5maz3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There's no reason to limit the supported rates of the test component
to specific ones as if it's a real piece of hardware. Set the rates to
continuous to aid in testing different rates.
Signed-off-by: John Watts <contact@jookia.org>
Link: https://patch.msgid.link/20241112-alsa_test_rates-v1-1-95cf529db871@jookia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The filechk macro always executes the syscalltbl script (and discards
the output if there are no changes).
Using if_changed is more efficient because it avoids running the script
when the target is up-to-date and the command remains unchanged.
All other architectures use if_changed for generating syscall headers.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20241111134603.2063226-3-masahiroy@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The filechk_syshdr macro receives $@ in both cases, making the argument
redundant.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20241111134603.2063226-2-masahiroy@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Building the kernel with ARCH=s390 creates a weird arch/arch/ directory.
$ find arch/arch
arch/arch
arch/arch/s390
arch/arch/s390/include
arch/arch/s390/include/generated
arch/arch/s390/include/generated/asm
arch/arch/s390/include/generated/uapi
arch/arch/s390/include/generated/uapi/asm
The root cause is 'targets' in arch/s390/kernel/syscalls/Makefile,
where the relative path is incorrect.
Strictly speaking, 'targets' was not necessary in the first place
because this Makefile uses 'filechk' instead of 'if_changed'.
However, this commit keeps it, as it will be useful when converting
'filechk' to 'if_changed' later.
Fixes: 5c75824d915e ("s390/syscalls: add Makefile to generate system call header files")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20241111134603.2063226-1-masahiroy@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Convert local64_cmpxchg() usages to local64_try_cmpxchg() in
order to generate slightly better code.
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Convert cmpxchg128() usages to try_cmpxchg128() in order to generate
slightly better code.
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
With users converted to the standard arch_cmpxchg() variants, remove
the now unused __atomic_cmpxchg() and __atomic_cmpxchg_bool() variants.
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Use arch_try_cmpxchg() instead of __atomic_cmpxchg_bool() everywhere.
This generates the same code like before, but uses the standard
cmpxchg() implementation instead of a custom __atomic_cmpxchg_bool().
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Use arch_try_cmpxchg() instead of __atomic_cmpxchg() in
preempt_count_set() to generate similar or better code,
depending in compiler features.
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Since gcc 14 flag output operands are supported also for s390.
Provide an arch_atomic try_cmpxchg() implementation so that all
existing atomic_try_cmpxchg() usages generate slightly better code,
if compiled with gcc 14 or newer.
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Use arch_cmpxchg() instead of __atomic_cmpxchg() for the
arch_atomic_cmpxchg() implementations. arch_cmpxchg() generates
the same code and doesn't need a cast like it is required for
arch_atomic64_cmpxchg().
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Convert the arch_atomic_xchg define to a C function so that proper
type checking is provided.
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Since gcc 14 flag output operands are supported also for s390.
Provide an arch_try_cmpxchg128() implementation so that all existing
try_cmpxchg128() variants provide slightly better code, if compiled
with gcc 14 or newer.
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Just like x86 and arm64 provide a trivial arch_cmpxchg128_local()
implementation by mapping it to arch_cmpxchg128().
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Get rid of the arch_xchg() inline assemblies by converting the inline
assemblies to C functions which make use of arch_try_cmpxchg().
With flag output operand support the generated code is at least as good as
the previous version. Without it is slightly worse, however getting rid of
all the inline assembly code is worth it.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Since gcc 14 flag output operands are supported also for s390.
Provide an arch_try_cmpxchg() implementation so that all existing
try_cmpxchg() variants provide slightly better code, if compiled
with gcc 14 or newer.
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Rewrite __cmpxchg() in order to get rid of the large inline
assemblies. Convert the one and two byte inline assemblies to
C functions.
The generated code of the new implementation is nearly as good or bad as
the old variant, but easier to read.
Note that the new variants are quite close to the generic cmpxchg_emu_u8()
implementation, however a conversion to the generic variant will not follow
since with mm/vmstat.c there is heavy user of one byte cmpxchg(). A not
inlined variant would have a negative performance impact.
Also note that the calls within __arch_cmpxchg() come with rather pointless
"& 0xff..." operations. They exist only to avoid false positive sparse
warnings like "warning: cast truncates bits from constant value ...".
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Dump tools from s390-tools such as zipl need to know the correct dump area
size of the machine they run on in order to be able to create valid
standalone dumper images. Therefore, allow it to be obtained through
the new sysfs read-only attribute /sys/firmware/dump/dump_area_size.
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Suggested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Get rid of sparse warnings:
CHECK drivers/s390/char/con3270.c
drivers/s390/char/con3270.c:531:15: warning: Using plain integer as NULL pointer
drivers/s390/char/con3270.c:749:15: warning: Using plain integer as NULL pointer
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Support the next version GPIO controller on SoCs like rk3576.
Signed-off-by: Ye Zhang <ye.zhang@rock-chips.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20241112015408.3139996-4-ye.zhang@rock-chips.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Have a list of valid IDs and default to -ENODEV.
Signed-off-by: Ye Zhang <ye.zhang@rock-chips.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241112015408.3139996-3-ye.zhang@rock-chips.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Remove redundant comments and provide a detailed explanation of the
GPIO version ID.
Signed-off-by: Ye Zhang <ye.zhang@rock-chips.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20241112015408.3139996-2-ye.zhang@rock-chips.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
It's inefficient and confusing to pass the MBSSID config
by value, requiring the whole struct to be copied. Pass
it by reference instead.
Link: https://patch.msgid.link/20241108092227.48fbd8a00112.I64abc1296a7557aadf798d88db931024486ab3b6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Support EHT 1024 aggregation size in TX
The 1024 agg size for RX is supported but not for TX.
This patch adds this support and refactors common parsing logics for
addbaext in both process_addba_resp and process_addba_req into a
function.
Reviewed-by: Shayne Chen <shayne.chen@mediatek.com>
Reviewed-by: Money Wang <money.wang@mediatek.com>
Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com>
Link: https://patch.msgid.link/20241112083846.32063-1-MeiChia.Chiu@mediatek.com
[pass elems/len instead of mgmt/len/is_req]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add check for the return value of clk_enable() to catch the potential
error.
Fixes: 7176ba23f8b5 ("net: rfkill: add generic gpio rfkill driver")
Signed-off-by: Mingwei Zheng <zmw12306@gmail.com>
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Link: https://patch.msgid.link/20241108195341.1853080-1-zmw12306@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add device tree schema for the Realtek RTL9300 switches. The RTL9300
family is made up of the RTL9301, RTL9302B, RTL9302C and RTL9303. These
have the same SoC differ in the Ethernet switch/SERDES arrangement.
Currently the only supported features are the syscon-reboot and i2c
controllers. The syscon-reboot is needed to be able to reboot the board.
The I2C controllers are slightly unusual because they each own an SCL
pin (GPIO8 for the first controller, GPIO 17 for the second) but have 8
common SDA pins which can be assigned to either controller (but not
both).
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241031200350.274945-5-chris.packham@alliedtelesis.co.nz
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
On some x86 Bay Trail tablets which shipped with Android as factory OS,
the DSDT is so broken that the PMIC needs to be manually instantiated by
the special x86-android-tablets.ko "fixup" driver for cases like this.
Add an i2c_device_id table so that the driver can match on manually
instantiated i2c_client-s (which lack an ACPI fwnode to match on).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241104150655.41402-3-hdegoede@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Currently the intel_soc_pmic_bxtwc, intel_soc_pmic_chtwc and
intel_soc_pmic_crc PMIC drivers use more or less free form strings
for their driver name.
Where as intel_soc_pmic_chtdc_ti and intel_soc_pmic_mrfld use the driver's
filename as driver name.
Update the 3 others to also use the driver's filename to make the naming
consistent.
Suggested-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241104150655.41402-2-hdegoede@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Document the qcom,msm8917-tcsr compatible.
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241031-msm8917-v2-8-8a075faa89b1@mainlining.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
When probing if default LED state is on then default brightness will be
applied instead of max brightness.
Signed-off-by: George Stark <gnstark@salutedevices.com>
Link: https://lore.kernel.org/r/20241105185006.1380166-3-gnstark@salutedevices.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Optional default-brightness property specifies brightness value to be
used if default LED state is on.
Signed-off-by: George Stark <gnstark@salutedevices.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241105185006.1380166-2-gnstark@salutedevices.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
We run into an exhaustion problem with the kernel-allocated filter IDs.
Our allocation problem can be fixed on the user space side,
but the error message in this case was quite misleading:
"Filter with specified priority/protocol not found" (EINVAL)
Specifically when we can't allocate a _new_ ID because filter with
lowest ID already _exists_, saying "filter not found", is confusing.
Kernel allocates IDs in range of 0xc0000 -> 0x8000, giving out ID one
lower than lowest existing in that range. The error message makes sense
when tcf_chain_tp_find() gets called for GET and DEL but for NEW we
need to provide more specific error messages for all three cases:
- user wants the ID to be auto-allocated but filter with ID 0x8000
already exists
- filter already exists and can be replaced, but user asked
for a protocol change
- filter doesn't exist
Caller of tcf_chain_tp_insert_unique() doesn't set extack today,
so don't bother plumbing it in.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20241108010254.2995438-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Michal Luczaj says:
====================
virtio/vsock: Fix memory leaks
Short series fixing some memory leaks that I've stumbled upon while toying
with the selftests.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
====================
Link: https://patch.msgid.link/20241107-vsock-mem-leaks-v2-0-4e21bfcfc818@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a missing kfree_skb() to prevent memory leaks.
Fixes: 581512a6dc93 ("vsock/virtio: MSG_ZEROCOPY flag support")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Acked-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Kernel queues MSG_ZEROCOPY completion notifications on the error queue.
Where they remain, until explicitly recv()ed. To prevent memory leaks,
clean up the queue when the socket is destroyed.
unreferenced object 0xffff8881028beb00 (size 224):
comm "vsock_test", pid 1218, jiffies 4294694897
hex dump (first 32 bytes):
90 b0 21 17 81 88 ff ff 90 b0 21 17 81 88 ff ff ..!.......!.....
00 00 00 00 00 00 00 00 00 b0 21 17 81 88 ff ff ..........!.....
backtrace (crc 6c7031ca):
[<ffffffff81418ef7>] kmem_cache_alloc_node_noprof+0x2f7/0x370
[<ffffffff81d35882>] __alloc_skb+0x132/0x180
[<ffffffff81d2d32b>] sock_omalloc+0x4b/0x80
[<ffffffff81d3a8ae>] msg_zerocopy_realloc+0x9e/0x240
[<ffffffff81fe5cb2>] virtio_transport_send_pkt_info+0x412/0x4c0
[<ffffffff81fe6183>] virtio_transport_stream_enqueue+0x43/0x50
[<ffffffff81fe0813>] vsock_connectible_sendmsg+0x373/0x450
[<ffffffff81d233d5>] ____sys_sendmsg+0x365/0x3a0
[<ffffffff81d246f4>] ___sys_sendmsg+0x84/0xd0
[<ffffffff81d26f47>] __sys_sendmsg+0x47/0x80
[<ffffffff820d3df3>] do_syscall_64+0x93/0x180
[<ffffffff8220012b>] entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: 581512a6dc93 ("vsock/virtio: MSG_ZEROCOPY flag support")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As the final stages of socket destruction may be delayed, it is possible
that virtio_transport_recv_listen() will be called after the accept_queue
has been flushed, but before the SOCK_DONE flag has been set. As a result,
sockets enqueued after the flush would remain unremoved, leading to a
memory leak.
vsock_release
__vsock_release
lock
virtio_transport_release
virtio_transport_close
schedule_delayed_work(close_work)
sk_shutdown = SHUTDOWN_MASK
(!) flush accept_queue
release
virtio_transport_recv_pkt
vsock_find_bound_socket
lock
if flag(SOCK_DONE) return
virtio_transport_recv_listen
child = vsock_create_connected
(!) vsock_enqueue_accept(child)
release
close_work
lock
virtio_transport_do_close
set_flag(SOCK_DONE)
virtio_transport_remove_sock
vsock_remove_sock
vsock_remove_bound
release
Introduce a sk_shutdown check to disallow vsock_enqueue_accept() during
socket destruction.
unreferenced object 0xffff888109e3f800 (size 2040):
comm "kworker/5:2", pid 371, jiffies 4294940105
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
28 00 0b 40 00 00 00 00 00 00 00 00 00 00 00 00 (..@............
backtrace (crc 9e5f4e84):
[<ffffffff81418ff1>] kmem_cache_alloc_noprof+0x2c1/0x360
[<ffffffff81d27aa0>] sk_prot_alloc+0x30/0x120
[<ffffffff81d2b54c>] sk_alloc+0x2c/0x4b0
[<ffffffff81fe049a>] __vsock_create.constprop.0+0x2a/0x310
[<ffffffff81fe6d6c>] virtio_transport_recv_pkt+0x4dc/0x9a0
[<ffffffff81fe745d>] vsock_loopback_work+0xfd/0x140
[<ffffffff810fc6ac>] process_one_work+0x20c/0x570
[<ffffffff810fce3f>] worker_thread+0x1bf/0x3a0
[<ffffffff811070dd>] kthread+0xdd/0x110
[<ffffffff81044fdd>] ret_from_fork+0x2d/0x50
[<ffffffff8100785a>] ret_from_fork_asm+0x1a/0x30
Fixes: 3fe356d58efa ("vsock/virtio: discard packets only when socket is really closed")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
fix dtbs_check errors in following files:
arch/arm64/boot/dts/marvell/armada-7040-db.dtb: sata@540000:
arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dtb: sata@540000:
arch/arm64/boot/dts/marvell/armada-8040-db.dtb: sata@540000:
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtb: sata@540000:
arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dtb: sata@540000:
Unevaluated properties are not allowed ('iommus' was unexpected)
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20241109094623.37518-4-linux@fw-web.de
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
Introduce a fault injection mechanism to force skb reallocation. The
primary goal is to catch bugs related to pointer invalidation after
potential skb reallocation.
The fault injection mechanism aims to identify scenarios where callers
retain pointers to various headers in the skb but fail to reload these
pointers after calling a function that may reallocate the data. This
type of bug can lead to memory corruption or crashes if the old,
now-invalid pointers are used.
By forcing reallocation through fault injection, we can stress-test code
paths and ensure proper pointer management after potential skb
reallocations.
Add a hook for fault injection in the following functions:
* pskb_trim_rcsum()
* pskb_may_pull_reason()
* pskb_trim()
As the other fault injection mechanism, protect it under a debug Kconfig
called CONFIG_FAIL_SKB_REALLOC.
This patch was *heavily* inspired by Jakub's proposal from:
https://lore.kernel.org/all/20240719174140.47a868e6@kernel.org/
CC: Akinobu Mita <akinobu.mita@gmail.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20241107-fault_v6-v6-1-1b82cb6ecacd@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Menglong Dong says:
====================
net: ip: add drop reasons to input route
In this series, we mainly add some skb drop reasons to the input path of
ip routing, and we make the following functions return drop reasons:
fib_validate_source()
ip_route_input_mc()
ip_mc_validate_source()
ip_route_input_slow()
ip_route_input_rcu()
ip_route_input_noref()
ip_route_input()
ip_mkroute_input()
__mkroute_input()
ip_route_use_hint()
And following new skb drop reasons are added:
SKB_DROP_REASON_IP_LOCAL_SOURCE
SKB_DROP_REASON_IP_INVALID_SOURCE
SKB_DROP_REASON_IP_LOCALNET
SKB_DROP_REASON_IP_INVALID_DEST
Changes since v4:
- in the 6th patch: remove the unneeded "else" in ip_expire()
- in the 8th patch: delete the unneeded comment in __mkroute_input()
- in the 9th patch: replace "return 0" with "return SKB_NOT_DROPPED_YET"
in ip_route_use_hint()
Changes since v3:
- don't refactor fib_validate_source/__fib_validate_source, and introduce
a wrapper for fib_validate_source() instead in the 1st patch.
- some small adjustment in the 4-7 patches
Changes since v2:
- refactor fib_validate_source and __fib_validate_source to make
fib_validate_source return drop reasons
- add the 9th and 10th patches to make this series cover the input route
code path
Changes since v1:
- make ip_route_input_noref/ip_route_input_rcu/ip_route_input_slow return
drop reasons, instead of passing a local variable to their function
arguments.
====================
Link: https://patch.msgid.link/20241107125601.1076814-1-dongml2@chinatelecom.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In this commit, we make ip_route_use_hint() return drop reasons. The
drop reasons that we return are similar to what we do in
ip_route_input_slow(), and no drop reasons are added in this commit.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In this commit, we make ip_mkroute_input() and __mkroute_input() return
drop reasons.
The drop reason "SKB_DROP_REASON_ARP_PVLAN_DISABLE" is introduced for
the case: the packet which is not IP is forwarded to the in_dev, and
the proxy_arp_pvlan is not enabled.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
