summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-01-10Merge tag 'vfs-6.13-rc7.fixes.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs fixes from Christian Brauner: "afs: - Fix the maximum cell name length - Fix merge preference rule failure condition fuse: - Fix fuse_get_user_pages() so it doesn't risk misleading the caller to think pages have been allocated when they actually haven't - Fix direct-io folio offset and length calculation netfs: - Fix async direct-io handling - Fix read-retry for filesystems that don't provide a ->prepare_read() method vfs: - Prevent truncating 64-bit offsets to 32-bits in iomap - Fix memory barrier interactions when polling - Remove MNT_ONRB to fix concurrent modification of @mnt->mnt_flags leading to MNT_ONRB to not be raised and invalid access to a list member" * tag 'vfs-6.13-rc7.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: poll: kill poll_does_not_wait() sock_poll_wait: kill the no longer necessary barrier after poll_wait() io_uring_poll: kill the no longer necessary barrier after poll_wait() poll_wait: kill the obsolete wait_address check poll_wait: add mb() to fix theoretical race between waitqueue_active() and .poll() afs: Fix merge preference rule failure condition netfs: Fix read-retry for fs with no ->prepare_read() netfs: Fix kernel async DIO fs: kill MNT_ONRB iomap: avoid avoid truncating 64-bit offset to 32 bits afs: Fix the maximum cell name length fuse: Set *nbytesp=0 in fuse_get_user_pages on allocation failure fuse: fix direct io folio offset and length calculation
2025-01-10drm/amd/display: Do not elevate mem_type change to full updateLeo Li
[Why] There should not be any need to revalidate bandwidth on memory placement change, since the fb is expected to be pinned to DCN-accessable memory before scanout. For APU it's DRAM, and DGPU, it's VRAM. However, async flips + memory type change needs to be rejected. [How] Do not set lock_and_validation_needed on mem_type change. Instead, reject an async_flip request if the crtc's buffer(s) changed mem_type. This may fix stuttering/corruption experienced with PSR SU and PSR1 panels, if the compositor allocates fbs in both VRAM carveout and GTT and flips between them. Fixes: a7c0cad0dc06 ("drm/amd/display: ensure async flips are only accepted for fast updates") Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10spi: Add spi_mem_calc_op_duration() helperMark Brown
Merge series from Miquel Raynal <miquel.raynal@bootlin.com>: Add a spi_mem_calc_op_duration() helper
2025-01-10drm/amd/display: Do not wait for PSR disable on vbl enableLeo Li
[Why] Outside of a modeset/link configuration change, we should not have to wait for the panel to exit PSR. Depending on the panel and it's state, it may take multiple frames for it to exit PSR. Therefore, waiting in all scenarios may cause perceived stuttering, especially in combination with faster vblank shutdown. [How] PSR1 disable is hooked up to the vblank enable event, and vice versa. In case of vblank enable, do not wait for panel to exit PSR, but still wait in all other cases. We also avoid a call to unnecessarily change power_opts on disable - this ends up sending another command to dmcub fw. When testing against IGT, some crc tests like kms_plane_alpha_blend and amd_hotplug were failing due to CRC timeouts. This was found to be caused by the early return before HW has fully exited PSR1. Fix this by first making sure we grab a vblank reference, then waiting for panel to exit PSR1, before programming hw for CRC generation. Fixes: 58a261bfc967 ("drm/amd/display: use a more lax vblank enable policy for older ASICs") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3743 Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Remove unnecessary eDP power downYiling Chen
[why] When first time of link training is fail, eDP would be powered down and would not be powered up for next retry link training. It causes that all of retry link linking would be fail. [how] We has extracted both power up and down sequence from enable/disable link output function before DCN32. We remov eDP power down in dcn32_disable_link_output(). Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Yiling Chen <yi-ling.chen2@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10Revert "drm/amd/display: Enable urgent latency adjustments for DCN35"Nicholas Susanto
Revert commit 284f141f5ce5 ("drm/amd/display: Enable urgent latency adjustments for DCN35") [Why & How] Urgent latency increase caused 2.8K OLED monitor caused it to block this panel support P0. Reverting this change does not reintroduce the netflix corruption issue which it fixed. Fixes: 284f141f5ce5 ("drm/amd/display: Enable urgent latency adjustments for DCN35") Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Add SMU interface to get UMC count for dcn401Dillon Varone
[WHY&HOW] BIOS table will not always contain accurate UMC channel info when harvesting is enabled, so get the correct info from SMU. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10Merge tag 'xfs-fixes-6.13-rc7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull xfs fixes from Carlos Maiolino: - Fix a missing lock while detaching a dquot buffer - Fix failure on xfs_update_last_rtgroup_size for !XFS_RT * tag 'xfs-fixes-6.13-rc7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: lock dquot buffer before detaching dquot from b_li_list xfs: don't return an error from xfs_update_last_rtgroup_size for !XFS_RT
2025-01-10drm/amd/display: Initialize denominator defaults to 1Alex Hung
[WHAT & HOW] Variables, used as denominators and maybe not assigned to other values, should be initialized to non-zero to avoid DIVIDE_BY_ZERO, as reported by Coverity. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Extend secure display to support DisplayCRC modeWayne Lin
[Why] For the legacy secure display, it involves PSP + DMUB to confgiure and retrieve the CRC/ROI result. Have requirement to support mode which all handled by driver only. [How] Add another "DisplayCRC" mode, which doesn't involve PSP + DMUB. All things are handled by the driver only Reviewed-by: HaoPing Liu <haoping.liu@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Add support to configure CRC window on specific CRC instanceWayne Lin
[Why] Have the need to specify the CRC window on specific CRC engine. dc_stream_configure_crc() today calculates CRC on crc engine 0 only and always resets CRC engine at first. [How] Add index parameter to dc_stream_configure_crc() for selecting the desired crc engine. Additionally, add another parameter to specify whether to skip the default reset of crc engine. Reviewed-by: HaoPing Liu <haoping.liu@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Reduce accessing remote DPCD overheadWayne Lin
[Why] Observed frame rate get dropped by tool like glxgear. Even though the output to monitor is 60Hz, the rendered frame rate drops to 30Hz lower. It's due to code path in some cases will trigger dm_dp_mst_is_port_support_mode() to read out remote Link status to assess the available bandwidth for dsc maniplation. Overhead of keep reading remote DPCD is considerable. [How] Store the remote link BW in mst_local_bw and use end-to-end full_pbn as an indicator to decide whether update the remote link bw or not. Whenever we need the info to assess the BW, visit the stored one first. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3720 Fixes: fa57924c76d9 ("drm/amd/display: Refactor function dm_dp_mst_is_port_support_mode()") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Validate mdoe under MST LCT=1 case as wellWayne Lin
[Why & How] Currently in dm_dp_mst_is_port_support_mode(), when valdidating mode under dsc decoding at the last DP link config, we only validate the case when there is an UFP. However, if the MSTB LCT=1, there is no UFP. Under this case, use root_link_bw_in_kbps as the available bw to compare. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3720 Fixes: fa57924c76d9 ("drm/amd/display: Refactor function dm_dp_mst_is_port_support_mode()") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: DML2.1 Post-Si CleanupRafal Ostrowski
[Why] There are a few cleanup and refactoring tasks that need to be done with the DML2.1 wrapper and DC interface to remove dependencies on legacy structures and N-1 prototypes. [How] Implemented pipe_ctx->global_sync. Implemented new functions to use pipe_ctx->hubp_regs and pipe_ctx->global_sync: - hubp_setup2 - hubp_setup_interdependent2 - Several other new functions for DCN 4.01 to support newer structures Removed dml21_update_pipe_ctx_dchub_regs Removed dml21_extract_legacy_watermark_set Removed dml21_populate_pipe_ctx_dlg_param Removed outdated dcn references in DML2.1 wrapper. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Rafal Ostrowski <rostrows@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Update chip_cap defines and usageMichael Strauss
[WHY] The defines have also been updated with prefix AMD_ and atomfirmware.h has been temporarily updated with both sets of defines to allow the transition. This update is being made to standardize workaround chip_cap flags, in order to support more workaround flags in the future. [HOW] Updated EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN define, the flag is now an enum masked by EXT_DISPLAY_PATH_CAPS__EXT_CHIP_MASK. All checks for DP_FIXED_VS_EN are now performed by masking with EXT_CHIP_MASK and checking for an exact match rather than the previous bitwise AND check. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: [FW Promotion] Release 0.0.248.0Taimur Hassan
Refactoring some flags for replay Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Add replay desync error count tracking and reset functionalityJack Chang
[Why & How] Build-up get/reset desync error count interface and implement the functions. Reviewed-by: ChunTao Tso <chuntao.tso@amd.com> Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Jack Chang <jack.chang@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Log Hard Min Clocks and Phantom Pipe StatusSung Lee
[WHY] On entering/exiting idle power, certain parameters would be very useful to know for power profiling purposes. [HOW] This commit adds certain hard min clocks and pipe types to log output on idle optimization enter/exit. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Sung Lee <Sung.Lee@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Limit Scaling Ratio on DCN3.01Gabe Teeger
[why] Underflow and flickering was occuring due to high scaling ratios when resizing videos. [how] Limit the scaling ratios by increasing the max scaling factor Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Gabe Teeger <Gabe.Teeger@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amdgpu/smu13: update powersave optimizationsAlex Deucher
Only apply when compute profile is selected. This is the only supported configuration. Selecting other profiles can lead to performane degradations. Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: add CEC notifier to amdgpu driverKun Liu
This patch adds the cec_notifier feature to amdgpu driver. The changes will allow amdgpu driver code to notify EDID and HPD changes to an eventual CEC adapter. Signed-off-by: Kun Liu <Kun.Liu2@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10pstore/zone: avoid dereferencing zero sized ptr after init zonesEugen Hristev
In psz_init_zones, if the requested area has a total_size less than record_size, kcalloc will be called with c == 0 and will return ZERO_SIZE_PTR. Further, this will lead to an oops. With this patch, in this scenario, it will look like this : [ 6.865545] pstore_zone: total size : 28672 Bytes [ 6.865547] pstore_zone: kmsg size : 65536 Bytes [ 6.865549] pstore_zone: pmsg size : 0 Bytes [ 6.865551] pstore_zone: console size : 0 Bytes [ 6.865553] pstore_zone: ftrace size : 0 Bytes [ 6.872095] pstore_zone: zone dmesg total_size too small [ 6.878234] pstore_zone: alloc zones failed Signed-off-by: Eugen Hristev <eugen.hristev@linaro.org> Link: https://lore.kernel.org/r/20250110125714.2594719-1-eugen.hristev@linaro.org Signed-off-by: Kees Cook <kees@kernel.org>
2025-01-10binfmt_flat: Fix integer overflow bug on 32 bit systemsDan Carpenter
Most of these sizes and counts are capped at 256MB so the math doesn't result in an integer overflow. The "relocs" count needs to be checked as well. Otherwise on 32bit systems the calculation of "full_data" could be wrong. full_data = data_len + relocs * sizeof(unsigned long); Fixes: c995ee28d29d ("binfmt_flat: prevent kernel dammage from corrupted executable headers") Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Nicolas Pitre <npitre@baylibre.com> Link: https://lore.kernel.org/r/5be17f6c-5338-43be-91ef-650153b975cb@stanley.mountain Signed-off-by: Kees Cook <kees@kernel.org>
2025-01-10Merge tag 'platform-drivers-x86-v6.13-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Ilpo Järvinen: "Fixes and new HW support: - amd/pmc: Match IRQ1 wakeup disable with the enable on i8042 side - intel: power-domains: Clearwater Forest support - intel/pmc: Skip SSRAM setup when no additional devices are present - ISST: Clearwater Forest support" * tag 'platform-drivers-x86-v6.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: intel/pmc: Fix ioremap() of bad address platform/x86: ISST: Add Clearwater Forest to support list platform/x86/intel: power-domains: Add Clearwater Forest support platform/x86/amd/pmc: Only disable IRQ1 wakeup where i8042 actually enabled it
2025-01-10Merge tag 'regulator-fix-v6.13-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A couple of fixes for !REGULATOR and !OF configurations, adding missing stubs" * tag 'regulator-fix-v6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Move OF_ API declarations/definitions outside CONFIG_REGULATOR regulator: Guard of_regulator_bulk_get_all() with CONFIG_OF
2025-01-10Merge tag 'gpio-fixes-for-v6.13-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: "There's one small fix for real HW - gpio-loongson. The rest concern two virtual testing drivers in which some issues were recently found and addressed: - fix resource leaks in error path in gpio-virtuser (and one consistent memory leak triggered on every device removal)) - fix the use-case of having multiple con_ids in a lookup table in gpio-virtuser which has never worked (despite being advertised) - don't allow rmdir() on configfs directories when they are in use in gpio-sim and gpio-virtuser - fix register offsets in gpio-loongson-64" * tag 'gpio-fixes-for-v6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: loongson: Fix Loongson-2K2000 ACPI GPIO register offset gpio: sim: lock up configfs that an instantiated device depends on gpio: virtuser: lock up configfs that an instantiated device depends on gpio: virtuser: fix handling of multiple conn_ids in lookup table gpio: virtuser: fix missing lookup table cleanups
2025-01-10spi: spi-mem: Estimate the time taken by operationsMiquel Raynal
In the SPI-NAND layer, we currently make list of operation variants from the fastest one to the slowest and there is a bit of logic in the core to go over them and pick the first one that is supported by the controller, ie. the fastest one among the supported ops. This kind of logic only works if all operations run at the same frequency, but as soon as we introduce per operation max frequencies it is not longer as obvious which operation will be faster, especially since it also depends on the PCB/controller frequency limitation. One way to make this choice more clever is to go over all the variants and for each of them derive an indicator which will help derive the theoretical best. In this case, we derive a theoretical duration for the entire operation and we take the smallest one. Add a helper that parses the spi-mem operation and returns this value. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://patch.msgid.link/20250110-winbond-6-11-rc1-quad-support-v3-20-7ab4bd56cf6e@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-01-10HID: lenovo: Fix undefined platform_profile_cycle in ThinkPad X12 keyboard patchVishnu Sankar
The commit "HID: lenovo: Support for ThinkPad-X12-TAB-1/2 Kbd Fn keys" introduced an issue where the CI failed with the following error: ERROR: modpost: "platform_profile_cycle" [drivers/hid/hid-lenovo.ko] undefined! This issue occurs because platform_profile_cycle is used without ensuring the kernel is configured with CONFIG_ACPI_PLATFORM_PROFILE. To address this, this patch adds conditional support for platform profile management to the Fn+F8 key handling. The functionality for platform_profile_cycle is now included only when CONFIG_ACPI_PLATFORM_PROFILE is enabled in the kernel configuration. This ensures compatibility with kernels that do not include the ACPI platform profile feature, resolving the CI build issue. Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com> Signed-off-by: Vishnu Sankar <vsankar@lenovo.com> Suggested-by: Benjamin Tissoires <bentiss@kernel.org> Suggested-by: Jiri Kosina <jikos@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-10spi-nand/spi-mem DTR supportMark Brown
Merge series from Miquel Raynal <miquel.raynal@bootlin.com>: Here is a (big) series supposed to bring DTR support in SPI-NAND.
2025-01-10io_uring/rw: don't gate retry on completion contextJens Axboe
nvme multipath reports that they see spurious -EAGAIN bubbling back to userspace, which is caused by how they handle retries internally through a kworker. However, any data that needs preserving or importing for a read/write request has always been done so at prep time, and we can sanely skip this check. Reported-by: "Haeuptle, Michael" <michael.haeuptle@hpe.com> Link: https://lore.kernel.org/io-uring/DS7PR84MB31105C2C63CFA47BE8CBD6EE95102@DS7PR84MB3110.NAMPRD84.PROD.OUTLOOK.COM/ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-01-10io_uring/rw: handle -EAGAIN retry at IO completion timeJens Axboe
Rather than try and have io_read/io_write turn REQ_F_REISSUE into -EAGAIN, catch the REQ_F_REISSUE when the request is otherwise considered as done. This is saner as we know this isn't happening during an actual submission, and it removes the need to randomly check REQ_F_REISSUE after read/write submission. If REQ_F_REISSUE is set, __io_submit_flush_completions() will skip over this request in terms of posting a CQE, and the regular request cleaning will ensure that it gets reissued via io-wq. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-01-10io_uring/rw: use io_rw_recycle() from cleanup pathJens Axboe
Cleanup should always have the uring lock held, it's safe to recycle from here. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-01-10perf docs: arm_spe: Document new discard modeJames Clark
Document the flag along with PMU events to hint what it's used for and give an example with other useful options to get minimal output. Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com> Signed-off-by: James Clark <james.clark@linaro.org> Link: https://lore.kernel.org/r/20250108142904.401139-3-james.clark@linaro.org Signed-off-by: Will Deacon <will@kernel.org>
2025-01-10perf: arm_spe: Add format option for discard modeJames Clark
FEAT_SPEv1p2 (optional from Armv8.6) adds a discard mode that allows all SPE data to be discarded rather than written to memory. Add a format bit for this mode. If the mode isn't supported, the format bit isn't published and attempts to use it will result in -EOPNOTSUPP. Allocating an aux buffer is still allowed even though it won't be written to so that old tools continue to work, but updated tools can choose to skip this step. Signed-off-by: James Clark <james.clark@linaro.org> Reviewd-by: Yeoreum Yun <yeoreum.yun@arm.com> Link: https://lore.kernel.org/r/20250108142904.401139-2-james.clark@linaro.org Signed-off-by: Will Deacon <will@kernel.org>
2025-01-10loop: remove the use_dio field in struct loop_deviceChristoph Hellwig
This field duplicate the LO_FLAGS_DIRECT_IO flag in lo_flags. Remove it to have a single source of truth about using direct I/O. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250110073750.1582447-9-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-01-10loop: don't freeze the queue in loop_update_dioChristoph Hellwig
All callers of loop_update_dio except for loop_configure already have the queue frozen, and loop_configure works on an unbound device. Remove the superfluous recursive freezing in loop_update_dio and add asserts for the locking and freezing state instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250110073750.1582447-8-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-01-10loop: allow loop_set_status to re-enable direct I/OChristoph Hellwig
Unlike all other calls of (__)loop_update_dio, loop_set_status never looks at the O_DIRECT flag of the backing file, and thus doesn't re-enable direct I/O on an O_DIRECT backing file if e.g. the new block size would allow it. Fix that and remove the need for the separate __loop_update_dio flag. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250110073750.1582447-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-01-10loop: open code the direct I/O flag update in loop_set_dioChristoph Hellwig
loop_set_dio is different from the other (__)loop_update_dio callers in that it doesn't take any implicit conditions into account and wants to update the direct I/O flag to the user passed in value and fail if that can't be done. Open code the logic here to prepare for simplifying the other direct I/O flag updates and to make the error handling less convoluted. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250110073750.1582447-6-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-01-10loop: only write back pagecache when starting to to use direct I/OChristoph Hellwig
There is no point in doing an fdatasync to write out pages when switching away from direct I/O, as there won't be any. The writeback is only needed when switching to direct I/O, which would have to invalidate the pagecache less efficiently from the I/O path. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250110073750.1582447-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-01-10loop: create a lo_can_use_dio helperChristoph Hellwig
Factor out a part of __loop_update_dio in preparation for further refactoring. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250110073750.1582447-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-01-10loop: update commands in loop_set_status still referring to transfersChristoph Hellwig
The concept of transfers is gone since commit 47e9624616c8 ("block: remove support for cryptoloop and the xor transfer"). Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250110073750.1582447-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-01-10loop: move updating lo_flags out of loop_set_status_from_infoChristoph Hellwig
While loop_configure simplify assigns the flags passed in by userspace, loop_set_status only looks at the two changeable flags, and currently has to do a complicate dance to implement that. Move assign lo->lo_flags out of loop_set_status_from_info into the callers and thus drastically simplify the lo_flags handling in loop_set_status. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250110073750.1582447-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-01-10Merge tag 'asoc-fix-v6.13-rc6' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.13 A collection of device specific fixes that came in over the holidays, plus a MAINTAINERS update and some documentation to help users debug problems with some of the Cirrus CODECs found in modern laptops.
2025-01-10loop: fix queue freeze vs limits lock orderChristoph Hellwig
Match the locking order used by the core block code by only freezing the queue after taking the limits lock using the queue_limits_commit_update_frozen helper and document the callers that do not freeze the queue at all. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Nilay Shroff <nilay@linux.ibm.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20250110054726.1499538-12-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-01-10loop: refactor queue limits updatesChristoph Hellwig
Replace loop_reconfigure_limits with a slightly less encompassing loop_update_limits that expects the caller to acquire and commit the queue limits to prepare for sorting out the freeze vs limits lock ordering. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Nilay Shroff <nilay@linux.ibm.com> Link: https://lore.kernel.org/r/20250110054726.1499538-11-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-01-10usb-storage: fix queue freeze vs limits lock orderChristoph Hellwig
Match the locking order used by the core block code by only freezing the queue after taking the limits lock using the queue_limits_commit_update_frozen helper. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Nilay Shroff <nilay@linux.ibm.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20250110054726.1499538-10-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-01-10nbd: fix queue freeze vs limits lock orderChristoph Hellwig
Match the locking order used by the core block code by only freezing the queue after taking the limits lock using the queue_limits_commit_update_frozen helper. This also allows removes the need for the separate __nbd_set_size helper, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Nilay Shroff <nilay@linux.ibm.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20250110054726.1499538-9-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-01-10nvme: fix queue freeze vs limits lock orderChristoph Hellwig
Match the locking order used by the core block code by only freezing the queue after taking the limits lock. Unlike most queue updates this does not use the queue_limits_commit_update_frozen helper as the nvme driver want the queue frozen for more than just the limits update. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Nilay Shroff <nilay@linux.ibm.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20250110054726.1499538-8-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-01-10block: fix queue freeze vs limits lock order in sysfs store methodsChristoph Hellwig
queue_attr_store() always freezes a device queue before calling the attribute store operation. For attributes that control queue limits, the store operation will also lock the queue limits with a call to queue_limits_start_update(). However, some drivers (e.g. SCSI sd) may need to issue commands to a device to obtain limit values from the hardware with the queue limits locked. This creates a potential ABBA deadlock situation if a user attempts to modify a limit (thus freezing the device queue) while the device driver starts a revalidation of the device queue limits. Avoid such deadlock by not freezing the queue before calling the ->store_limit() method in struct queue_sysfs_entry and instead use the queue_limits_commit_update_frozen helper to freeze the queue after taking the limits lock. This also removes taking the sysfs lock for the store_limit method as it doesn't protect anything here, but creates even more nesting. Hopefully it will go away from the actual sysfs methods entirely soon. (commit log adapted from a similar patch from Damien Le Moal) Fixes: ff956a3be95b ("block: use queue_limits_commit_update in queue_discard_max_store") Fixes: 0327ca9d53bf ("block: use queue_limits_commit_update in queue_max_sectors_store") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Nilay Shroff <nilay@linux.ibm.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20250110054726.1499538-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-01-10block: add a store_limit operations for sysfs entriesChristoph Hellwig
De-duplicate the code for updating queue limits by adding a store_limit method that allows having common code handle the actual queue limits update. Note that this is a pure refactoring patch and does not address the existing freeze vs limits lock order problem in the refactored code, which will be addressed next. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Nilay Shroff <nilay@linux.ibm.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20250110054726.1499538-6-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit (git 2.34.1) at 2025-09-24 03:04:40 +0000