summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-09-28ARM: locomo: fix locomolcd_power declarationArnd Bergmann
The locomolcd driver has one remaining missing-prototype warning: drivers/video/backlight/locomolcd.c:83:6: error: no previous prototype for 'locomolcd_power' [-Werror=missing-prototypes] There is in fact an unused prototype with a similar name in a global header, so move the actual one there and remove the old one. Link: https://lore.kernel.org/r/20230927194844.680771-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-09-28Merge tag 'scmi-fix-6.6' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Arm SCMI fix for v6.6 A single fix to address scmi_perf_attributes_get() using the protocol version even before it was populated and ending up with unexpected bogowatts power scale. * tag 'scmi-fix-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Fixup perf power-cost/microwatt support Link: https://lore.kernel.org/r/20230927121604.158645-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-09-28Merge tag 'ffa-fix-6.6' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Arm FF-A fix for v6.6 It has been reported that the driver sets the memory region attributes for MEM_LEND operation when the specification clearly states not to. The fix here addresses the issue by ensuring the memory region attributes are cleared for the memory lending operation. * tag 'ffa-fix-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_ffa: Don't set the memory region attributes for MEM_LEND Link: https://lore.kernel.org/r/20230927121555.158619-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-09-27i2c: npcm7xx: Fix callback completion orderingWilliam A. Kennington III
Sometimes, our completions race with new master transfers and override the bus->operation and bus->master_or_slave variables. This causes transactions to timeout and kernel crashes less frequently. To remedy this, we re-order all completions to the very end of the function. Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: William A. Kennington III <william@wkennington.com> Reviewed-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-09-27SUNRPC/TLS: Lock the lower_xprt during the tls handshakeAnna Schumaker
Otherwise we run the risk of having the lower_xprt freed from underneath us, causing an oops that looks like this: [ 224.150698] BUG: kernel NULL pointer dereference, address: 0000000000000018 [ 224.150951] #PF: supervisor read access in kernel mode [ 224.151117] #PF: error_code(0x0000) - not-present page [ 224.151278] PGD 0 P4D 0 [ 224.151361] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 224.151499] CPU: 2 PID: 99 Comm: kworker/u10:6 Not tainted 6.6.0-rc3-g6465e260f487 #41264 a00b0960990fb7bc6d6a330ee03588b67f08a47b [ 224.151977] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 2/2/2022 [ 224.152216] Workqueue: xprtiod xs_tcp_tls_setup_socket [sunrpc] [ 224.152434] RIP: 0010:xs_tcp_tls_setup_socket+0x3cc/0x7e0 [sunrpc] [ 224.152643] Code: 00 00 48 8b 7c 24 08 e9 f3 01 00 00 48 83 7b c0 00 0f 85 d2 01 00 00 49 8d 84 24 f8 05 00 00 48 89 44 24 10 48 8b 00 48 89 c5 <4c> 8b 68 18 66 41 83 3f 0a 75 71 45 31 ff 4c 89 ef 31 f6 e8 5c 76 [ 224.153246] RSP: 0018:ffffb00ec060fd18 EFLAGS: 00010246 [ 224.153427] RAX: 0000000000000000 RBX: ffff8c06c2e53e40 RCX: 0000000000000001 [ 224.153652] RDX: ffff8c073bca2408 RSI: 0000000000000282 RDI: ffff8c06c259ee00 [ 224.153868] RBP: 0000000000000000 R08: ffffffff9da55aa0 R09: 0000000000000001 [ 224.154084] R10: 00000034306c30f1 R11: 0000000000000002 R12: ffff8c06c2e51800 [ 224.154300] R13: ffff8c06c355d400 R14: 0000000004208160 R15: ffff8c06c2e53820 [ 224.154521] FS: 0000000000000000(0000) GS:ffff8c073bd00000(0000) knlGS:0000000000000000 [ 224.154763] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 224.154940] CR2: 0000000000000018 CR3: 0000000062c1e000 CR4: 0000000000750ee0 [ 224.155157] PKRU: 55555554 [ 224.155244] Call Trace: [ 224.155325] <TASK> [ 224.155395] ? __die_body+0x68/0xb0 [ 224.155507] ? page_fault_oops+0x34c/0x3a0 [ 224.155635] ? _raw_spin_unlock_irqrestore+0xe/0x40 [ 224.155793] ? exc_page_fault+0x7a/0x1b0 [ 224.155916] ? asm_exc_page_fault+0x26/0x30 [ 224.156047] ? xs_tcp_tls_setup_socket+0x3cc/0x7e0 [sunrpc ae3a15912ae37fd51dafbdbc2dbd069117f8f5c8] [ 224.156367] ? xs_tcp_tls_setup_socket+0x2fe/0x7e0 [sunrpc ae3a15912ae37fd51dafbdbc2dbd069117f8f5c8] [ 224.156697] ? __pfx_xs_tls_handshake_done+0x10/0x10 [sunrpc ae3a15912ae37fd51dafbdbc2dbd069117f8f5c8] [ 224.157013] process_scheduled_works+0x24e/0x450 [ 224.157158] worker_thread+0x21c/0x2d0 [ 224.157275] ? __pfx_worker_thread+0x10/0x10 [ 224.157409] kthread+0xe8/0x110 [ 224.157510] ? __pfx_kthread+0x10/0x10 [ 224.157628] ret_from_fork+0x37/0x50 [ 224.157741] ? __pfx_kthread+0x10/0x10 [ 224.157859] ret_from_fork_asm+0x1b/0x30 [ 224.157983] </TASK> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2023-09-27Revert "SUNRPC dont update timeout value on connection reset"Trond Myklebust
This reverts commit 88428cc4ae7abcc879295fbb19373dd76aad2bdd. The problem this commit is intended to fix was comprehensively fixed in commit 7de62bc09fe6 ("SUNRPC dont update timeout value on connection reset"). Since then, this commit has been preventing the correct timeout of soft mounted requests. Cc: stable@vger.kernel.org # 5.9.x: 09252177d5f9: SUNRPC: Handle major timeout in xprt_adjust_timeout() Cc: stable@vger.kernel.org # 5.9.x: 7de62bc09fe6: SUNRPC dont update timeout value on connection reset Cc: stable@vger.kernel.org # 5.9.x Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2023-09-27NFSv4: Fix a state manager thread deadlock regressionTrond Myklebust
Commit 4dc73c679114 reintroduces the deadlock that was fixed by commit aeabb3c96186 ("NFSv4: Fix a NFSv4 state manager deadlock") because it prevents the setup of new threads to handle reboot recovery, while the older recovery thread is stuck returning delegations. Fixes: 4dc73c679114 ("NFSv4: keep state manager thread active if swap is enabled") Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2023-09-27NFSv4: Fix a nfs4_state_manager() raceTrond Myklebust
If the NFS4CLNT_RUN_MANAGER flag got set just before we cleared NFS4CLNT_MANAGER_RUNNING, then we might have won the race against nfs4_schedule_state_manager(), and are responsible for handling the recovery situation. Fixes: aeabb3c96186 ("NFSv4: Fix a NFSv4 state manager deadlock") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2023-09-27SUNRPC: Fail quickly when server does not recognize TLSChuck Lever
rpcauth_checkverf() should return a distinct error code when a server recognizes the AUTH_TLS probe but does not support TLS so that the client's header decoder can respond appropriately and quickly. No retries are necessary is in this case, since the server has already affirmatively answered "TLS is unsupported". Suggested-by: Trond Myklebust <trondmy@hammerspace.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2023-09-27Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "A single fix for libata: older devices don't support command duration limits (CDL) and some don't support report opcodes, meaning there's no way to tell if they support the command or not. Reduce the problems of incorrectly using CDL commands on older devices by checking SCSI spec compliance at SPC-5 (the spec which introduced the command) before turning on CDL" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: core: ata: Do no try to probe for CDL on old drives
2023-09-27Merge tag 'vfio-v6.6-rc4' of https://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO fixes from Alex Williamson: - The new PDS vfio-pci variant driver only supports SR-IOV VF devices and incorrectly made a direct reference to the physfn field of the pci_dev. Fix this both by making the Kconfig depend on IOV support as well as using the correct wrapper for this access (Shixiong Ou) - Resolve an error path issue where on unwind of the mdev registration the created kset is not unregistered and the wrong error code is returned (Jinjie Ruan) * tag 'vfio-v6.6-rc4' of https://github.com/awilliam/linux-vfio: vfio/mdev: Fix a null-ptr-deref bug for mdev_unregister_parent() vfio/pds: Use proper PF device access helper vfio/pds: Add missing PCI_IOV depends
2023-09-27ima: rework CONFIG_IMA dependency blockArnd Bergmann
Changing the direct dependencies of IMA_BLACKLIST_KEYRING and IMA_LOAD_X509 caused them to no longer depend on IMA, but a a configuration without IMA results in link failures: arm-linux-gnueabi-ld: security/integrity/iint.o: in function `integrity_load_keys': iint.c:(.init.text+0xd8): undefined reference to `ima_load_x509' aarch64-linux-ld: security/integrity/digsig_asymmetric.o: in function `asymmetric_verify': digsig_asymmetric.c:(.text+0x104): undefined reference to `ima_blacklist_keyring' Adding explicit dependencies on IMA would fix this, but a more reliable way to do this is to enclose the entire Kconfig file in an 'if IMA' block. This also allows removing the existing direct dependencies. Fixes: be210c6d3597f ("ima: Finish deprecation of IMA_TRUSTED_KEYRING Kconfig") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2023-09-27scsi: zfcp: Fix a double put in zfcp_port_enqueue()Dinghao Liu
When device_register() fails, zfcp_port_release() will be called after put_device(). As a result, zfcp_ccw_adapter_put() will be called twice: one in zfcp_port_release() and one in the error path after device_register(). So the reference on the adapter object is doubly put, which may lead to a premature free. Fix this by adjusting the error tag after device_register(). Fixes: f3450c7b9172 ("[SCSI] zfcp: Replace local reference counting with common kref") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20230923103723.10320-1-dinghao.liu@zju.edu.cn Acked-by: Benjamin Block <bblock@linux.ibm.com> Cc: stable@vger.kernel.org # v2.6.33+ Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-27spi: spi-gxp: BUG: Correct spi write return valueCharles Kearney
Bug fix to correct return value of gxp_spi_write function to zero. Completion of succesful operation should return zero. Fixes: 730bc8ba5e9e spi: spi-gxp: Add support for HPE GXP SoCs Signed-off-by: Charles Kearney <charles.kearney@hpe.com> Link: https://lore.kernel.org/r/20230920215339.4125856-2-charles.kearney@hpe.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-09-27scsi: fnic: Fix sg_reset success pathKaran Tilak Kumar
sg_reset performs a target or LUN reset. Since the command is issued by the user, it does not come into the driver with a tag or a queue id. Fix the fnic driver to create an io_req and use a SCSI command tag. Fix the ITMF path to special case the sg_reset response. Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Tested-by: Karan Tilak Kumar <kartilak@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20230919182436.6895-1-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-27scsi: target: core: Fix deadlock due to recursive lockingJunxiao Bi
The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] #16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 #17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] #18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] #19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 #20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb460bcb ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230918225848.66463-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-27timers: Tag (hr)timer softirq as hotplug safeFrederic Weisbecker
Specific stress involving frequent CPU-hotplug operations, such as running rcutorture for example, may trigger the following message: NOHZ tick-stop error: local softirq work is pending, handler #02!!!" This happens in the CPU-down hotplug process, after CPUHP_AP_SMPBOOT_THREADS whose teardown callback parks ksoftirqd, and before the target CPU shuts down through CPUHP_AP_IDLE_DEAD. In this fragile intermediate state, softirqs waiting for threaded handling may be forever ignored and eventually reported by the idle task as in the above example. However some vectors are known to be safe as long as the corresponding subsystems have teardown callbacks handling the migration of their events. The above error message reports pending timers softirq although this vector can be considered as hotplug safe because the CPUHP_TIMERS_PREPARE teardown callback performs the necessary migration of timers after the death of the CPU. Hrtimers also have a similar hotplug handling. Therefore this error message, as far as (hr-)timers are concerned, can be considered spurious and the relevant softirq vectors can be marked as hotplug safe. Fixes: 0345691b24c0 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle") Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230912104406.312185-6-frederic@kernel.org
2023-09-27wifi: iwlwifi: mvm: Fix incorrect usage of scan APIIlan Peer
The support for using link ID in the scan request API was only added in version 16. However, the code wrongly enabled this API usage also for older versions. Fix it. Reported-by: Antoine Beaupré <anarcat@debian.org> Fixes: e98b23d0d7b8 ("wifi: iwlwifi: mvm: Add support for SCAN API version 16") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230926165546.086e635fbbe6.Ia660f35ca0b1079f2c2ea92fd8d14d8101a89d03@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-27swiotlb: fix the check whether a device has used software IO TLBPetr Tesarik
When CONFIG_SWIOTLB_DYNAMIC=y, devices which do not use the software IO TLB can avoid swiotlb lookup. A flag is added by commit 1395706a1490 ("swiotlb: search the software IO TLB only if the device makes use of it"), the flag is correctly set, but it is then never checked. Add the actual check here. Note that this code is an alternative to the default pool check, not an additional check, because: 1. swiotlb_find_pool() also searches the default pool; 2. if dma_uses_io_tlb is false, the default swiotlb pool is not used. Tested in a KVM guest against a QEMU RAM-backed SATA disk over virtio and *not* using software IO TLB, this patch increases IOPS by approx 2% for 4-way parallel I/O. The write memory barrier in swiotlb_dyn_alloc() is not needed, because a newly allocated pool must always be observed by swiotlb_find_slots() before an address from that pool is passed to is_swiotlb_buffer(). Correctness was verified using the following litmus test: C swiotlb-new-pool (* * Result: Never * * Check that a newly allocated pool is always visible when the * corresponding swiotlb buffer is visible. *) { mem_pools = default; } P0(int **mem_pools, int *pool) { /* add_mem_pool() */ WRITE_ONCE(*pool, 999); rcu_assign_pointer(*mem_pools, pool); } P1(int **mem_pools, int *flag, int *buf) { /* swiotlb_find_slots() */ int *r0; int r1; rcu_read_lock(); r0 = READ_ONCE(*mem_pools); r1 = READ_ONCE(*r0); rcu_read_unlock(); if (r1) { WRITE_ONCE(*flag, 1); smp_mb(); } /* device driver (presumed) */ WRITE_ONCE(*buf, r1); } P2(int **mem_pools, int *flag, int *buf) { /* device driver (presumed) */ int r0 = READ_ONCE(*buf); /* is_swiotlb_buffer() */ int r1; int *r2; int r3; smp_rmb(); r1 = READ_ONCE(*flag); if (r1) { /* swiotlb_find_pool() */ rcu_read_lock(); r2 = READ_ONCE(*mem_pools); r3 = READ_ONCE(*r2); rcu_read_unlock(); } } exists (2:r0<>0 /\ 2:r3=0) (* Not found. *) Fixes: 1395706a1490 ("swiotlb: search the software IO TLB only if the device makes use of it") Reported-by: Jonathan Corbet <corbet@lwn.net> Closes: https://lore.kernel.org/linux-iommu/87a5uz3ob8.fsf@meer.lwn.net/ Signed-off-by: Petr Tesarik <petr@tesarici.cz> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-09-27Merge tag 'aspeed-6.6-maintainers' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/fixes ASPEED Maintainers update Andrew has changed addresses and the git tree has long since been at a different location. * tag 'aspeed-6.6-maintainers' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: MAINTAINERS: aspeed: Update Andrew's email address MAINTAINERS: aspeed: Update git tree URL Link: https://lore.kernel.org/r/CACPK8Xc+D=YBc2Dhk-6-gOuvKN0xGgZYNop6oJVa=VNgaEYOHw@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-09-27soc: loongson: loongson2_guts: Remove unneeded semicolonMingtong Bao
No functional modification involved. ./drivers/soc/loongson/loongson2_guts.c:73:2-3: Unneeded semicolon. Reviewed-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Mingtong Bao <baomingtong001@208suo.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-09-27soc: loongson: loongson2_guts: Convert to devm_platform_ioremap_resource()Dongliang Mu
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn> Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-09-27soc: loongson: loongson_pm2: Populate children syscon nodesBinbin Zhou
The syscon poweroff and reboot nodes logically belong to the Power Management Unit so populate possible children. Without it, the reboot/poweroff feature becomes unavailable. Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-09-27dt-bindings: soc: loongson,ls2k-pmc: Allow syscon-reboot/syscon-poweroff as ↵Binbin Zhou
child The reboot and poweroff features are actually part of the Power Management Unit system controller, thus allow them as its children, instead of specifying as separate device nodes with syscon phandle. Without it, the reboot/poweroff feature becomes unavailable. Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-09-27soc: loongson: loongson_pm2: Drop useless of_device_id compatibleBinbin Zhou
Now, "loongson,ls2k0500-pmc" is used as fallback compatible, so the ls2k1000 compatible in the driver can be dropped directly. Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-09-27dt-bindings: soc: loongson,ls2k-pmc: Use fallbacks for ls2k-pmc compatibleBinbin Zhou
The Loongson-2K series chips (ls2k0500/ls2k1000/ls2k2000) share the same PM system controller, using ls2k0500 compatible as fallback for the others. Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-09-27soc: loongson: loongson_pm2: Add dependency for INPUTBinbin Zhou
Since commit 67694c076bd7 ("soc: loongson2_pm: add power management support"), the Loongson-2K PM driver was added, but it didn't update the Kconfig entry for the INPUT dependency, leading to build errors, so update the Kconfig entry to depend on INPUT. /opt/crosstool/gcc-13.2.0-nolibc/loongarch64-linux/bin/loongarch64-linux-ld: drivers/soc/loongson/loongson2_pm.o: in function `loongson2_power_button_init': /work/lnx/next/linux-next-20230825/LOONG64/../drivers/soc/loongson/loongson2_pm.c:101:(.text+0x350): undefined reference to `input_allocate_device' /opt/crosstool/gcc-13.2.0-nolibc/loongarch64-linux/bin/loongarch64-linux-ld: /work/lnx/next/linux-next-20230825/LOONG64/../drivers/soc/loongson/loongson2_pm.c:109:(.text+0x3dc): undefined reference to `input_set_capability' /opt/crosstool/gcc-13.2.0-nolibc/loongarch64-linux/bin/loongarch64-linux-ld: /work/lnx/next/linux-next-20230825/LOONG64/../drivers/soc/loongson/loongson2_pm.c:111:(.text+0x3e4): undefined reference to `input_register_device' /opt/crosstool/gcc-13.2.0-nolibc/loongarch64-linux/bin/loongarch64-linux-ld: /work/lnx/next/linux-next-20230825/LOONG64/../drivers/soc/loongson/loongson2_pm.c:125:(.text+0x3fc): undefined reference to `input_free_device' /opt/crosstool/gcc-13.2.0-nolibc/loongarch64-linux/bin/loongarch64-linux-ld: drivers/soc/loongson/loongson2_pm.o: in function `input_report_key': /work/lnx/next/linux-next-20230825/LOONG64/../include/linux/input.h:425:(.text+0x58c): undefined reference to `input_event' Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-09-27Merge tag 'optee-for-for-v6.6' of ↵Arnd Bergmann
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes Remove a few unused declarations in TEE subsystem * tag 'optee-for-for-v6.6' of https://git.linaro.org/people/jens.wiklander/linux-tee: tee: Remove unused declarations Link: https://lore.kernel.org/r/20230913083909.GA473533@rayden Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-09-27Merge tag 'riscv-dt-fixes-for-v6.6-rc3' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes RISC-V Devicetree fixes for v6.6-rc3 Starfive: A fix for the size of the NOR flash that was causing complaints from the MTD subsystem during boot & two issues that a certain someone introduced while resolving merge conflicts. Of the latter, one is a cosmetic ordering change & the other lead to the usb controller being disabled. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-dt-fixes-for-v6.6-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: dts: starfive: visionfive 2: Fix uart0 pins sort order riscv: dts: starfive: visionfive 2: Enable usb0 riscv: dts: starfive: fix NOR flash reserved-data partition size Link: https://lore.kernel.org/r/20230916-previous-oversold-9d30891ac6cf@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-09-27arm64: defconfig: remove CONFIG_COMMON_CLK_NPCM8XX=yMikko Rapeli
There is no code for this config option and enabling it in defconfig causes warnings from tools which are detecting unused and obsolete kernel config flags since the flag will be completely missing from effective build config after "make olddefconfig". Fixes yocto kernel recipe build time warning: WARNING: [kernel config]: This BSP contains fragments with warnings: ... [INFO]: the following symbols were not found in the active configuration: - CONFIG_COMMON_CLK_NPCM8XX The flag was added with commit 45472f1e5348c7b755b4912f2f529ec81cea044b v5.19-rc4-15-g45472f1e5348 so 6.1 and 6.4 stable kernel trees are affected. Fixes: 45472f1e5348c7b755b4912f2f529ec81cea044b ("arm64: defconfig: Add Nuvoton NPCM family support") Cc: stable@kernel.org Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Bjorn Andersson <quic_bjorande@quicinc.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Konrad Dybcio <konrad.dybcio@linaro.org> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Tomer Maimon <tmaimon77@gmail.com> Cc: Bruce Ashfield <bruce.ashfield@gmail.com> Cc: Jon Mason <jon.mason@arm.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: Ross Burton <ross@burtonini.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-09-27Merge tag 'imx-fixes-6.6' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.6: - A couple of i.MX8MP device tree changes from Adam Ford to fix clock configuration regressions caused by 16c984524862 ("arm64: dts: imx8mp: don't initialize audio clocks from CCM node"). - Fix pmic-irq-hog GPIO line in imx93-tqma9352 device tree. - Fix a mmemory leak with error handling path of imx_dsp_setup_channels() in imx-dsp driver. - Fix HDMI node in imx8mm-evk device tree. - Add missing clock enable functionality for imx8mm_soc_uid() function in soc-imx8m driver. - Add missing imx8mm-prt8mm.dtb build target. * tag 'imx-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx: Add imx8mm-prt8mm.dtb to build arm64: dts: imx8mm-evk: Fix hdmi@3d node soc: imx8m: Enable OCOTP clock for imx8mm before reading registers arm64: dts: imx8mp-beacon-kit: Fix audio_pll2 clock arm64: dts: imx8mp: Fix SDMA2/3 clocks arm64: dts: freescale: tqma9352: Fix gpio hog firmware: imx-dsp: Fix an error handling path in imx_dsp_setup_channels() Link: https://lore.kernel.org/r/20230926123710.GT7231@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-09-27Merge tag 'omap-for-v6.6/fixes-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps and ti-sysc Fixes for several ti-sysc interconnect target module driver issues for external abort on non-linefetch, am35x soc match, and uart module quirks handling needed for devices to work and to allow device wake-up to work. Fixes for droid4 boot time errors and warnings as noticed after boot doing dmesg -lerr,warn. Let's also cut down the debug uart noise by using overrun-throttle-ms, and downgrade the u-boot version warnings to debug statements to further reduce the boot time noise with warnings. * tag 'omap-for-v6.6/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Fix SYSC_QUIRK_SWSUP_SIDLE_ACT handling for uart wake-up ARM: omap2+: Downgrade u-boot version warnings to debug statements ARM: dts: ti: omap: Fix noisy serial with overrun-throttle-ms for mapphone ARM: dts: ti: omap: motorola-mapphone: Fix abe_clkctrl warning on boot ARM: dts: ti: omap: Fix bandgap thermal cells addressing for omap3/4 bus: ti-sysc: Fix missing AM35xx SoC matching bus: ti-sysc: Use fsleep() instead of usleep_range() in sysc_reset() Link: https://lore.kernel.org/r/pull-1695715881-95183@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-09-27ARM: uniphier: fix cache kernel-doc warningsRandy Dunlap
Fix kernel-doc warning(s) as reported by lkp: arch/arm/mm/cache-uniphier.c:72: warning: cannot understand function prototype: 'struct uniphier_cache_data ' cache-uniphier.c:82: warning: Function parameter or member 'way_ctrl_base' not described in 'uniphier_cache_data' Fixes: e7ecbc057bc5 ("ARM: uniphier: add outer cache support") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: soc@kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Link: lore.kernel.org/r/202309260130.Uvwh8ceE-lkp@intel.com # fixes only one item Link: https://lore.kernel.org/r/20230926003548.22066-1-rdunlap@infradead.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-09-27LoongArch: Add support for 64_PCREL relocation typeTiezhu Yang
When build and update kernel with the latest upstream binutils and loongson3_defconfig, module loader fails with: kmod: zsmalloc: Unknown relocation type 109 kmod: fuse: Unknown relocation type 109 kmod: fuse: Unknown relocation type 109 kmod: radeon: Unknown relocation type 109 kmod: nf_tables: Unknown relocation type 109 kmod: nf_tables: Unknown relocation type 109 This is because the latest upstream binutils replaces a pair of ADD64 and SUB64 with 64_PCREL, so add support for 64_PCREL relocation type. Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ecb802d02eeb Cc: <stable@vger.kernel.org> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-27LoongArch: Add support for 32_PCREL relocation typeTiezhu Yang
When build and update kernel with the latest upstream binutils and loongson3_defconfig, module loader fails with: kmod: zsmalloc: Unsupport relocation type 99, please add its support. kmod: fuse: Unsupport relocation type 99, please add its support. kmod: ipmi_msghandler: Unsupport relocation type 99, please add its support. kmod: ipmi_msghandler: Unsupport relocation type 99, please add its support. kmod: pstore: Unsupport relocation type 99, please add its support. kmod: drm_display_helper: Unsupport relocation type 99, please add its support. kmod: drm_display_helper: Unsupport relocation type 99, please add its support. kmod: drm_display_helper: Unsupport relocation type 99, please add its support. kmod: fuse: Unsupport relocation type 99, please add its support. kmod: fat: Unsupport relocation type 99, please add its support. This is because the latest upstream binutils replaces a pair of ADD32 and SUB32 with 32_PCREL, so add support for 32_PCREL relocation type. Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ecb802d02eeb Cc: <stable@vger.kernel.org> Co-developed-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-27LoongArch: Define relocation types for ABI v2.10Tiezhu Yang
The relocation types from 101 to 109 are used by GNU binutils >= 2.41, add their definitions to use them in later patches. Link: https://sourceware.org/git/?p=binutils-gdb.git;a=blob;f=include/elf/loongarch.h#l230 Cc: <stable@vger.kernel.org> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-27LoongArch: numa: Fix high_memory calculationHuacai Chen
For 64bit kernel without HIGHMEM, high_memory is the virtual address of the highest physical address in the system. But __va(get_num_physpages() << PAGE_SHIFT) is not what we want for high_memory because there may be holes in the physical address space. On the other hand, max_low_pfn is calculated from memblock_end_of_DRAM(), which is exactly corresponding to the highest physical address, so use it for high_memory calculation. Cc: <stable@vger.kernel.org> Fixes: d4b6f1562a3c3284adce ("LoongArch: Add Non-Uniform Memory Access (NUMA) support") Signed-off-by: Chong Qiao <qiaochong@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-27gpio: pmic-eic-sprd: Add can_sleep flag for PMIC EIC chipWenhua Lin
The drivers uses a mutex and I2C bus access in its PMIC EIC chip get implementation. This means these functions can sleep and the PMIC EIC chip should set the can_sleep property to true. This will ensure that a warning is printed when trying to get the value from a context that potentially can't sleep. Fixes: 348f3cde84ab ("gpio: Add Spreadtrum PMIC EIC driver support") Signed-off-by: Wenhua Lin <Wenhua.Lin@unisoc.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-09-27gpio: timberdale: Fix potential deadlock on &tgpio->lockChengfeng Ye
As timbgpio_irq_enable()/timbgpio_irq_disable() callback could be executed under irq context, it could introduce double locks on &tgpio->lock if it preempts other execution units requiring the same locks. timbgpio_gpio_set() --> timbgpio_update_bit() --> spin_lock(&tgpio->lock) <interrupt> --> timbgpio_irq_disable() --> spin_lock_irqsave(&tgpio->lock) This flaw was found by an experimental static analysis tool I am developing for irq-related deadlock. To prevent the potential deadlock, the patch uses spin_lock_irqsave() on &tgpio->lock inside timbgpio_gpio_set() to prevent the possible deadlock scenario. Signed-off-by: Chengfeng Ye <dg573847474@gmail.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-09-27accel/ivpu: Use cached buffers for FW loadingKarol Wachowski
Create buffers with cache coherency on the CPU side (write-back) while disabling snooping on the VPU side. These buffers require an explicit cache flush after each CPU-side modification. Configuring pages as write-combined may introduce significant delays, potentially taking hundreds of milliseconds for 64 MB buffers. Added internal DRM_IVPU_BO_NOSNOOP mask which disables snooping on the VPU side. Allocate FW runtime memory buffer (64 MB) as cached with snooping-disabled. This fixes random long FW loading times and boot params memory corruption on warmboot (due to missed wmb). Fixes: 02d5b0aacd05 ("accel/ivpu: Implement firmware parsing and booting") Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230926120943.GD846747@linux.intel.com
2023-09-27accel/ivpu/40xx: Fix missing VPUIP interruptsKarol Wachowski
Move sequence of masking and unmasking global interrupts from buttress interrupt handler to generic one that handles both VPUIP and BTRS interrupts. Unmasking global interrupts will re-trigger MSI for any pending interrupts. Lack of this sequence can randomly cause to miss any VPUIP interrupt that comes after reading VPU_40XX_HOST_SS_ICB_STATUS_0 and before clearing all active interrupt sources. Fixes: 79cdc56c4a54 ("accel/ivpu: Add initial support for VPU 4") Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-6-stanislaw.gruszka@linux.intel.com
2023-09-27accel/ivpu/40xx: Disable frequency change interruptKarol Wachowski
Do not enable frequency change interrupt on 40xx as it might lead to an interrupt storm in current design. FREQ_CHANGE interrupt is triggered on D0I2 entry which will cause KMD to check VPU interrupt sources by reading VPUIP registers. Access to those registers will toggle necessary clocks and trigger another FREQ_CHANGE interrupt possibly ending in an infinite loop. FREQ_CHANGE interrupt has only debug purposes and can be permanently disabled. Fixes: 79cdc56c4a54 ("accel/ivpu: Add initial support for VPU 4") Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-5-stanislaw.gruszka@linux.intel.com
2023-09-27accel/ivpu/40xx: Ensure clock resource ownership Ack before Power-UpKarol Wachowski
We need to wait for the CLOCK_RESOURCE_OWN_ACK bit to be set after configuring the workpoint. This step ensures that the VPU microcontroller clock is actively toggling and ready for operation. Previously, we relied solely on the READY bit in the VPU_STATUS register, which indicated the completion of the workpoint download. However, this approach was insufficient, as the READY bit could be set while the device was still running on a sideband clock until the PLL locked. To guarantee that the PLL is locked and the device is running on the main clock source, we now wait for the CLOCK_RESOURCE_OWN_ACK before proceeding with the remainder of the power-up sequence. Fixes: 79cdc56c4a54 ("accel/ivpu: Add initial support for VPU 4") Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-4-stanislaw.gruszka@linux.intel.com
2023-09-27accel/ivpu: Don't flood dmesg with VPU ready messageJacek Lawrynowicz
Use ivpu_dbg() to print the VPU ready message so it doesn't pollute the dmesg. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-3-stanislaw.gruszka@linux.intel.com
2023-09-27accel/ivpu: Do not use wait event interruptibleStanislaw Gruszka
If we receive signal when waiting for IPC message response in ivpu_ipc_receive() we return error and continue to operate. Then the driver can send another IPC messages and re-use occupied slot of the message still processed by the firmware. This can result in corrupting firmware memory and following FW crash with messages: [ 3698.569719] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_send_receive_internal(): IPC receive failed: type 0x1103, ret -512 [ 3698.569747] intel_vpu 0000:00:0b.0: [drm] ivpu_jsm_unregister_db(): Failed to unregister doorbell 3: -512 [ 3698.569756] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_tx_prepare(): IPC message vpu:0x88980000 not released by firmware [ 3698.569763] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_tx_prepare(): JSM message vpu:0x88980040 not released by firmware [ 3698.570234] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_send_receive_internal(): IPC receive failed: type 0x110e, ret -512 [ 3698.570318] intel_vpu 0000:00:0b.0: [drm] *ERROR* ivpu_mmu_dump_event(): MMU EVTQ: 0x10 (Translation fault) SSID: 0 SID: 3, e[2] 00000000, e[3] 00000208, in addr: 0x88988000, fetch addr: 0x0 To fix the issue don't use interruptible variant of wait event to allow firmware to finish IPC processing. Fixes: 5d7422cfb498 ("accel/ivpu: Add IPC driver and JSM messages") Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-2-stanislaw.gruszka@linux.intel.com
2023-09-27MAINTAINERS: update nouveau maintainersDanilo Krummrich
Since I will continue to work on Nouveau consistently, also beyond my former and still ongoing VM_BIND/EXEC work, add myself to the list of Nouveau maintainers. Signed-off-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230926014913.7721-1-dakr@redhat.com
2023-09-26selftests: Fix wrong TARGET in kselftest top level MakefileJuntong Deng
The 'uevents' subdirectory does not exist in tools/testing/selftests/ and adding 'uevents' to the TARGETS list results in the following error: make[1]: Entering directory 'xx/tools/testing/selftests/uevents' make[1]: *** No targets specified and no makefile found. Stop. make[1]: Leaving directory 'xx/tools/testing/selftests/uevents' What actually exists in tools/testing/selftests/ is the 'uevent' subdirectory. Signed-off-by: Juntong Deng <juntong.deng@outlook.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-09-26ima: Finish deprecation of IMA_TRUSTED_KEYRING KconfigOleksandr Tymoshenko
The removal of IMA_TRUSTED_KEYRING made IMA_LOAD_X509 and IMA_BLACKLIST_KEYRING unavailable because the latter two depend on the former. Since IMA_TRUSTED_KEYRING was deprecated in favor of INTEGRITY_TRUSTED_KEYRING use it as a dependency for the two Kconfigs affected by the deprecation. Fixes: 5087fd9e80e5 ("ima: Remove deprecated IMA_TRUSTED_KEYRING Kconfig") Signed-off-by: Oleksandr Tymoshenko <ovt@google.com> Reviewed-by: Nayna Jain <nayna@linux.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2023-09-26Merge tag 'wq-for-6.6-rc3-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue fixes from Tejun Heo: - Remove double allocation of wq_update_pod_attrs_buf - Fix missing allocation of pwq_release_worker when wq_cpu_intensive_thresh_us is set to a custom value * tag 'wq-for-6.6-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Fix missed pwq_release_worker creation in wq_cpu_intensive_thresh_init() workqueue: Removed double allocation of wq_update_pod_attrs_buf
2023-09-26i915/guc: Get runtime pm in busyness worker only if already activeUmesh Nerlige Ramappa
Ideally the busyness worker should take a gt pm wakeref because the worker only needs to be active while gt is awake. However, the gt_park path cancels the worker synchronously and this complicates the flow if the worker is also running at the same time. The cancel waits for the worker and when the worker releases the wakeref, that would call gt_park and would lead to a deadlock. The resolution is to take the global pm wakeref if runtime pm is already active. If not, we don't need to update the busyness stats as the stats would already be updated when the gt was parked. Note: - We do not requeue the worker if we cannot take a reference to runtime pm since intel_guc_busyness_unpark would requeue the worker in the resume path. - If the gt was parked longer than time taken for GT timestamp to roll over, we ignore those rollovers since we don't care about tracking the exact GT time. We only care about roll overs when the gt is active and running workloads. - There is a window of time between gt_park and runtime suspend, where the worker may run. This is acceptable since the worker will not find any new data to update busyness. v2: (Daniele) - Edit commit message and code comment - Use runtime pm in the worker - Put runtime pm after enabling the worker - Use Link tag and add Fixes tag v3: (Daniele) - Reword commit and comments and add details Link: https://gitlab.freedesktop.org/drm/intel/-/issues/7077 Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu") Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230925192117.2497058-1-umesh.nerlige.ramappa@intel.com (cherry picked from commit e2f99b79d4c594cdf7ab449e338d4947f5ea8903) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
generated by cgit (git 2.34.1) at 2025-09-12 23:01:20 +0000