summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-10-09drm/msm/dpu: enable PINGPONG TE operations only when supported by HWDmitry Baryshkov
The DPU_PINGPONG_TE bit is set for all PINGPONG blocks on DPU < 5.0. Rather than checking for the flag, check for the presense of the corresponding interrupt line. Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/555541/ Link: https://lore.kernel.org/r/20230904020454.2945667-3-dmitry.baryshkov@linaro.org
2023-10-09drm/msm/dpu: inline _setup_pingpong_ops()Dmitry Baryshkov
Inline the _setup_pingpong_ops() function, it makes it easier to handle different conditions involving PINGPONG configuration. Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/555545/ Link: https://lore.kernel.org/r/20230904020454.2945667-2-dmitry.baryshkov@linaro.org
2023-10-09drm/msm/dp: skip validity check for DP CTS EDID checksumJani Nikula
The DP CTS test for EDID last block checksum expects the checksum for the last block, invalid or not. Skip the validity check. For the most part (*), the EDIDs returned by drm_get_edid() will be valid anyway, and there's the CTS workaround to get the checksum for completely invalid EDIDs. See commit 7948fe12d47a ("drm/msm/dp: return correct edid checksum after corrupted edid checksum read"). This lets us remove one user of drm_edid_block_valid() with hopes the function can be removed altogether in the future. (*) drm_get_edid() ignores checksum errors on CTA extensions. Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Kuogee Hsieh <khsieh@codeaurora.org> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: Stephen Boyd <swboyd@chromium.org> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/555361/ Link: https://lore.kernel.org/r/20230901142034.580802-1-jani.nikula@intel.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-10-09drm/msm/dp: Remove dp_display_is_ds_bridge()Stephen Boyd
This function is simply drm_dp_is_branch() so use that instead of open-coding it. Cc: Vinod Polimera <quic_vpolimer@quicinc.com> Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/554989/ Link: https://lore.kernel.org/r/20230829184735.2841739-8-swboyd@chromium.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-10-09drm/msm/dp: Inline dp_link_parse_sink_count()Stephen Boyd
The function dp_link_parse_sink_count() is really just drm_dp_read_sink_count(). It debug prints out the bit for content protection (DP_SINK_CP_READY), but that is not useful beyond debug because 'link->dp_link.sink_count' is overwritten to only contain the sink_count in this same function. Just use drm_dp_read_sink_count() in the one place this function is called to simplify. Cc: Vinod Polimera <quic_vpolimer@quicinc.com> Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/554987/ Link: https://lore.kernel.org/r/20230829184735.2841739-7-swboyd@chromium.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-10-09drm/msm/dp: Simplify with drm_dp_{max_link_rate, max_lane_count}()Stephen Boyd
These are open-coded versions of common functions. Replace them with the common code to improve readability. Cc: Vinod Polimera <quic_vpolimer@quicinc.com> Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/554990/ Link: https://lore.kernel.org/r/20230829184735.2841739-6-swboyd@chromium.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-10-09drm/msm/dp: Remove aux_cfg_update_done and related codeStephen Boyd
The member 'aux_cfg_update_done' is always false. This is dead code that never runs. Remove it. Cc: Vinod Polimera <quic_vpolimer@quicinc.com> Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/554985/ Link: https://lore.kernel.org/r/20230829184735.2841739-5-swboyd@chromium.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-10-09drm/msm/dp: Remove dead code related to downstream cap infoStephen Boyd
We read the downstream port count and capability info but never use it anywhere. Remove 'ds_port_cnt' and 'ds_cap_info' and any associated code from this driver. Fold the check for 'dfp_present' into a call to drm_dp_is_branch() at the one place it is used to get rid of any member storage related to downstream ports. Cc: Vinod Polimera <quic_vpolimer@quicinc.com> Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/554984/ Link: https://lore.kernel.org/r/20230829184735.2841739-4-swboyd@chromium.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-10-09drm/msm/dp: Use drm_dp_read_sink_count() helperStephen Boyd
Use the common function drm_dp_read_sink_count() instead of open-coding it. This shrinks the kernel text a tiny bit. Cc: Vinod Polimera <quic_vpolimer@quicinc.com> Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/554983/ Link: https://lore.kernel.org/r/20230829184735.2841739-3-swboyd@chromium.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-10-09drm/msm/dp: Replace open-coded drm_dp_read_dpcd_caps()Stephen Boyd
This function duplicates the common function drm_dp_read_dpcd_caps(). The array of DPCD registers filled in is one size larger than the function takes, but from what I can tell that extra byte was never used. Resize the array and use the common function to reduce the code here. Cc: Vinod Polimera <quic_vpolimer@quicinc.com> Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/554981/ Link: https://lore.kernel.org/r/20230829184735.2841739-2-swboyd@chromium.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-10-09drm/msm/dsi: Enable widebus for DSIJessica Zhang
DSI 6G v2.5.x+ supports a data-bus widen mode that allows DSI to send 48 bits of compressed data instead of 24. Enable this mode whenever DSC is enabled for supported chipsets. Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/553762/ Link: https://lore.kernel.org/r/20230822-add-widebus-support-v4-4-9dc86083d6ea@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-10-09drm/msm/dsi: Add DATABUS_WIDEN MDP_CTRL2 bitJessica Zhang
Add a DATABUS_WIDEN bit to the MDP_CTRL2 register to allow DSI to enable databus widen mode. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/553757/ Link: https://lore.kernel.org/r/20230822-add-widebus-support-v4-3-9dc86083d6ea@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-10-09drm/msm/dpu: Enable widebus for DSI INTFJessica Zhang
DPU supports a data-bus widen mode for DSI INTF. Enable this mode for all supported chipsets if widebus is enabled for DSI. Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/553756/ Link: https://lore.kernel.org/r/20230822-add-widebus-support-v4-2-9dc86083d6ea@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-10-09drm/msm/dpu: Move setting of dpu_enc::wide_bus_en to atomic enable()Jessica Zhang
Move the setting of dpu_enc::wide_bus_en to dpu_encoder_virt_atomic_enable() so that it mirrors how dpu_enc::dsc is being set. Since wide bus for DSI is related to DSC, having it mirror how DSC is set in DPU will also make it easier to accommodate for the possibility of DSC for DSI being set during runtime in the future. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/553759/ Link: https://lore.kernel.org/r/20230822-add-widebus-support-v4-1-9dc86083d6ea@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-10-09drm/msm: Remove unnecessary NULL valuesRuan Jinjie
The NULL initialization of the pointers assigned by kzalloc() first is not necessary, because if the kzalloc() failed, the pointers will be assigned NULL, otherwise it works as usual. so remove it. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/551872/ Link: https://lore.kernel.org/r/20230809034445.434902-4-ruanjinjie@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-10-09drm/msm/dpu: shift IRQ indices by 1Dmitry Baryshkov
In order to simplify IRQ declarations, shift IRQ indices by 1. This makes 0 the 'no IRQ' value. Thanks to this change, we do no longer have to explicitly set the 'no interrupt' fields in catalog structures. Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/550938/ Link: https://lore.kernel.org/r/20230802100426.4184892-9-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-10-09drm/msm/dpu: stop using raw IRQ indices in the kernel tracesDmitry Baryshkov
In preparation to reworking IRQ indcies, stop using raw indices in kernel traces. Instead use a pair of register index and bit. This corresponds closer to the values in HW catalog. Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/550935/ Link: https://lore.kernel.org/r/20230802100426.4184892-8-dmitry.baryshkov@linaro.org
2023-10-09drm/msm/dpu: stop using raw IRQ indices in the kernel outputDmitry Baryshkov
In preparation to reworking IRQ indcies, stop using raw IRQ indices in kernel output (both printk and debugfs). Instead use a pair of register index and bit. This corresponds closer to the values in HW catalog. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/550933/ Link: https://lore.kernel.org/r/20230802100426.4184892-7-dmitry.baryshkov@linaro.org
2023-10-09drm/msm/dpu: make the irq table size staticDmitry Baryshkov
The size of the irq table is static, it has MDP_INTR_MAX * 32 interrupt entries. Provide the fixed length and drop struct_size() statement. Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/550927/ Link: https://lore.kernel.org/r/20230802100426.4184892-6-dmitry.baryshkov@linaro.org
2023-10-09drm/msm/dpu: add helper to get IRQ-related dataDmitry Baryshkov
In preparation to reworking IRQ indices, move irq_tbl access to a separate helper. Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/550931/ Link: https://lore.kernel.org/r/20230802100426.4184892-5-dmitry.baryshkov@linaro.org
2023-10-09drm/msm/dpu: extract dpu_core_irq_is_valid() helperDmitry Baryshkov
In preparation to reworking IRQ indices, move irq_idx validation to a separate helper. Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/550929/ Link: https://lore.kernel.org/r/20230802100426.4184892-4-dmitry.baryshkov@linaro.org
2023-10-09drm/msm/dpu: remove irq_idx argument from IRQ callbacksDmitry Baryshkov
There is no point in passing the IRQ index to IRQ callbacks, no function uses that. Drop it at last. Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/550925/ Link: https://lore.kernel.org/r/20230802100426.4184892-3-dmitry.baryshkov@linaro.org
2023-10-05drm/msm/dpu: fail dpu_plane_atomic_check() based on mdp clk limitsAbhinav Kumar
Currently, dpu_plane_atomic_check() does not check whether the plane can process the image without exceeding the per chipset limits for MDP clock. This leads to underflow issues because the SSPP is not able to complete the processing for the data rate of the display. Fail the dpu_plane_atomic_check() if the SSPP cannot process the image without exceeding the MDP clock limits. changes in v2: - use crtc_state's adjusted_mode instead of mode Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/556819/ Link: https://lore.kernel.org/r/20230911221627.9569-1-quic_abhinavk@quicinc.com
2023-09-20drm/msm/dp: Add newlines to debug printksStephen Boyd
These debug printks are missing newlines, causing drm debug logs to be hard to read. Add newlines so that the messages are on their own line. Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Cc: Vinod Polimera <quic_vpolimer@quicinc.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Fixes: 601f0479c583 ("drm/msm/dp: add logs across DP driver for ease of debugging") Fixes: cd779808cccd ("drm/msm/dp: Add basic PSR support for eDP") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/554533/ Link: https://lore.kernel.org/r/20230825230109.2264345-1-swboyd@chromium.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2023-09-20drm/msm/dpu: change _dpu_plane_calc_bw() to use u64 to avoid overflowAbhinav Kumar
_dpu_plane_calc_bw() uses integer variables to calculate the bandwidth used during plane bandwidth calculations. However for high resolution displays this overflows easily and leads to below errors [dpu error]crtc83 failed performance check -7 Promote the intermediate variables to u64 to avoid overflow. changes in v2: - change to u64 where actually needed in the math Fixes: c33b7c0389e1 ("drm/msm/dpu: add support for clk and bw scaling for display") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reported-by: Nia Espera <nespera@igalia.com> Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/32 Tested-by: Nia Espera <nespera@igalia.com> Patchwork: https://patchwork.freedesktop.org/patch/556288/ Link: https://lore.kernel.org/r/20230908012616.20654-1-quic_abhinavk@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2023-09-20drm/msm/dsi: fix irq_of_parse_and_map() error checkingDan Carpenter
The irq_of_parse_and_map() function returns zero on error. It never returns negative error codes. Fix the check. Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/557715/ Link: https://lore.kernel.org/r/4f3c5c98-04f7-43f7-900f-5d7482c83eef@moroto.mountain Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2023-09-20drm/msm/dsi: skip the wait for video mode done if not applicableAbhinav Kumar
dsi_wait4video_done() API waits for the DSI video mode engine to become idle so that we can transmit the DCS commands in the beginning of BLLP. However, with the current sequence, the MDP timing engine is turned on after the panel's pre_enable() callback which can send out the DCS commands needed to power up the panel. During those cases, this API will always timeout and print out the error spam leading to long bootup times and log flooding. Fix this by checking if the DSI video engine was actually busy before waiting for it to become idle otherwise this is a redundant wait. changes in v2: - move the reg read below the video mode check - minor fixes in commit text Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/34 Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support") Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/557853/ Link: https://lore.kernel.org/r/20230915204426.19011-1-quic_abhinavk@quicinc.com
2023-09-20drm/msm/mdss: fix highest-bank-bit for msm8998Dmitry Baryshkov
According to the vendor DT files, msm8998 has highest-bank-bit equal to 2. Update the data accordingly. Fixes: 6f410b246209 ("drm/msm/mdss: populate missing data") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/555840/ Link: https://lore.kernel.org/r/20230905174353.3118648-2-dmitry.baryshkov@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2023-09-20drm/msm/dp: do not reinitialize phy unless retry during link trainingKuogee Hsieh
DP PHY re-initialization done using dp_ctrl_reinitialize_mainlink() will cause PLL unlocked initially and then PLL gets locked at the end of initialization. PLL_UNLOCKED interrupt will fire during this time if the interrupt mask is enabled. However currently DP driver link training implementation incorrectly re-initializes PHY unconditionally during link training as the PHY was already configured in dp_ctrl_enable_mainlink_clocks(). Fix this by re-initializing the PHY only if the previous link training failed. [drm:dp_aux_isr] *ERROR* Unexpected DP AUX IRQ 0x01000000 when not busy Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/30 Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280 Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/551847/ Link: https://lore.kernel.org/r/1691533190-19335-1-git-send-email-quic_khsieh@quicinc.com [quic_abhinavk@quicinc.com: added line break in commit text] Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2023-09-17Linux 6.6-rc2v6.6-rc2Linus Torvalds
2023-09-17Merge tag 'x86-urgent-2023-09-17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: - Fix an UV boot crash - Skip spurious ENDBR generation on _THIS_IP_ - Fix ENDBR use in putuser() asm methods - Fix corner case boot crashes on 5-level paging - and fix a false positive WARNING on LTO kernels" * tag 'x86-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/purgatory: Remove LTO flags x86/boot/compressed: Reserve more memory for page tables x86/ibt: Avoid duplicate ENDBR in __put_user_nocheck*() x86/ibt: Suppress spurious ENDBR x86/platform/uv: Use alternate source for socket to node data
2023-09-17Merge tag 'sched-urgent-2023-09-17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Fix a performance regression on large SMT systems, an Intel SMT4 balancing bug, and a topology setup bug on (Intel) hybrid processors" * tag 'sched-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sched: Restore the SD_ASYM_PACKING flag in the DIE domain sched/fair: Fix SMT4 group_smt_balance handling sched/fair: Optimize should_we_balance() for large SMT systems
2023-09-17Merge tag 'objtool-urgent-2023-09-17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fix from Ingo Molnar: "Fix a cold functions related false-positive objtool warning that triggers on Clang" * tag 'objtool-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix _THIS_IP_ detection for cold functions
2023-09-17Merge tag 'core-urgent-2023-09-17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull WARN fix from Ingo Molnar: "Fix a missing preempt-enable in the WARN() slowpath" * tag 'core-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: panic: Reenable preemption in WARN slowpath
2023-09-17stat: remove no-longer-used helper macrosLinus Torvalds
The choose_32_64() macros were added to deal with an odd inconsistency between the 32-bit and 64-bit layout of 'struct stat' way back when in commit a52dd971f947 ("vfs: de-crapify "cp_new_stat()" function"). Then a decade later Mikulas noticed that said inconsistency had been a mistake in the early x86-64 port, and shouldn't have existed in the first place. So commit 932aba1e1690 ("stat: fix inconsistency between struct stat and struct compat_stat") removed the uses of the helpers. But the helpers remained around, unused. Get rid of them. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-09-17Merge tag '6.6-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull smb client fixes from Steve French: "Three small SMB3 client fixes, one to improve a null check and two minor cleanups" * tag '6.6-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: smb3: fix some minor typos and repeated words smb3: correct places where ENOTSUPP is used instead of preferred EOPNOTSUPP smb3: move server check earlier when setting channel sequence number
2023-09-17Merge tag '6.6-rc1-ksmbd' of git://git.samba.org/ksmbdLinus Torvalds
Pull smb server fixes from Steve French: "Two ksmbd server fixes" * tag '6.6-rc1-ksmbd' of git://git.samba.org/ksmbd: ksmbd: fix passing freed memory 'aux_payload_buf' ksmbd: remove unneeded mark_inode_dirty in set_info_sec()
2023-09-17Merge tag 'ext4_for_linus-6.6-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Regression and bug fixes for ext4" * tag 'ext4_for_linus-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix rec_len verify error ext4: do not let fstrim block system suspend ext4: move setting of trimmed bit into ext4_try_to_trim_range() jbd2: Fix memory leak in journal_init_common() jbd2: Remove page size assumptions buffer: Make bh_offset() work for compound pages
2023-09-17x86/purgatory: Remove LTO flagsSong Liu
-flto* implies -ffunction-sections. With LTO enabled, ld.lld generates multiple .text sections for purgatory.ro: $ readelf -S purgatory.ro | grep " .text" [ 1] .text PROGBITS 0000000000000000 00000040 [ 7] .text.purgatory PROGBITS 0000000000000000 000020e0 [ 9] .text.warn PROGBITS 0000000000000000 000021c0 [13] .text.sha256_upda PROGBITS 0000000000000000 000022f0 [15] .text.sha224_upda PROGBITS 0000000000000000 00002be0 [17] .text.sha256_fina PROGBITS 0000000000000000 00002bf0 [19] .text.sha224_fina PROGBITS 0000000000000000 00002cc0 This causes WARNING from kexec_purgatory_setup_sechdrs(): WARNING: CPU: 26 PID: 110894 at kernel/kexec_file.c:919 kexec_load_purgatory+0x37f/0x390 Fix this by disabling LTO for purgatory. [ AFAICT, x86 is the only arch that supports LTO and purgatory. ] We could also fix this with an explicit linker script to rejoin .text.* sections back into .text. However, given the benefit of LTOing purgatory is small, simply disable the production of more .text.* sections for now. Fixes: b33fff07e3e3 ("x86, build: allow LTO to be selected") Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Link: https://lore.kernel.org/r/20230914170138.995606-1-song@kernel.org
2023-09-17x86/boot/compressed: Reserve more memory for page tablesKirill A. Shutemov
The decompressor has a hard limit on the number of page tables it can allocate. This limit is defined at compile-time and will cause boot failure if it is reached. The kernel is very strict and calculates the limit precisely for the worst-case scenario based on the current configuration. However, it is easy to forget to adjust the limit when a new use-case arises. The worst-case scenario is rarely encountered during sanity checks. In the case of enabling 5-level paging, a use-case was overlooked. The limit needs to be increased by one to accommodate the additional level. This oversight went unnoticed until Aaron attempted to run the kernel via kexec with 5-level paging and unaccepted memory enabled. Update wost-case calculations to include 5-level paging. To address this issue, let's allocate some extra space for page tables. 128K should be sufficient for any use-case. The logic can be simplified by using a single value for all kernel configurations. [ Also add a warning, should this memory run low - by Dave Hansen. ] Fixes: 34bbb0009f3b ("x86/boot/compressed: Enable 5-level paging during decompression stage") Reported-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20230915070221.10266-1-kirill.shutemov@linux.intel.com
2023-09-16Merge tag 'kbuild-fixes-v6.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix kernel-devel RPM and linux-headers Deb package - Fix too long argument list error in 'make modules_install' * tag 'kbuild-fixes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: avoid long argument lists in make modules_install kbuild: fix kernel-devel RPM package and linux-headers Deb package
2023-09-16vm: fix move_vma() memory accounting being offLinus Torvalds
Commit 408579cd627a ("mm: Update do_vmi_align_munmap() return semantics") seems to have updated one of the callers of do_vmi_munmap() incorrectly: it used to check for the error case (which didn't change: negative means error). That commit changed the check to the success case (which did change: before that commit, 0 was success, and 1 was "success and lock downgraded". After the change, it's always 0 for success, and the lock will have been released if requested). This didn't change any actual VM behavior _except_ for memory accounting when 'VM_ACCOUNT' was set on the vma. Which made the wrong return value test fairly subtle, since everything continues to work. Or rather - it continues to work but the "Committed memory" accounting goes all wonky (Committed_AS value in /proc/meminfo), and depending on settings that then causes problems much much later as the VM relies on bogus statistics for its heuristics. Revert that one line of the change back to the original logic. Fixes: 408579cd627a ("mm: Update do_vmi_align_munmap() return semantics") Reported-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de> Reported-bisected-and-tested-by: Michael Labiuk <michael.labiuk@virtuozzo.com> Cc: Bagas Sanjaya <bagasdotme@gmail.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Link: https://lore.kernel.org/all/1694366957@msgid.manchmal.in-ulm.de/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-09-16Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "16 small(ish) fixes all in drivers. The major fixes are in pm8001 (fixes MSI-X issue going back to its origin), the qla2xxx endianness fix, which fixes a bug on big endian and the lpfc ones which can cause an oops on module removal without them" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: lpfc: Prevent use-after-free during rmmod with mapped NVMe rports scsi: lpfc: Early return after marking final NLP_DROPPED flag in dev_loss_tmo scsi: lpfc: Fix the NULL vs IS_ERR() bug for debugfs_create_file() scsi: target: core: Fix target_cmd_counter leak scsi: pm8001: Setup IRQs on resume scsi: pm80xx: Avoid leaking tags when processing OPC_INB_SET_CONTROLLER_CONFIG command scsi: pm80xx: Use phy-specific SAS address when sending PHY_START command scsi: ufs: core: Poll HCS.UCRDY before issuing a UIC command scsi: ufs: core: Move __ufshcd_send_uic_cmd() outside host_lock scsi: qedf: Add synchronization between I/O completions and abort scsi: target: Replace strlcpy() with strscpy() scsi: qla2xxx: Fix NULL vs IS_ERR() bug for debugfs_create_dir() scsi: qla2xxx: Use raw_smp_processor_id() instead of smp_processor_id() scsi: qla2xxx: Correct endianness for rqstlen and rsplen scsi: ppa: Fix accidentally reversed conditions for 16-bit and 32-bit EPP scsi: megaraid_sas: Fix deadlock on firmware crashdump
2023-09-16Merge tag 'ata-6.6-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ata fixes from Damien Le Moal: - Fix link power management transitions to disallow unsupported states (Niklas) - A small string handling fix for the sata_mv driver (Christophe) - Clear port pending interrupts before reset, as per AHCI specifications (Szuying). Followup fixes for this one are to not clear ATA_PFLAG_EH_PENDING in ata_eh_reset() to allow EH to continue on with other actions recorded with error interrupts triggered before EH completes. And an additional fix to avoid thawing a port twice in EH (Niklas) - Small code style fixes in the pata_parport driver to silence the build bot as it keeps complaining about bad indentation (me) - A fix for the recent CDL code to avoid fetching sense data for successful commands when not necessary for correct operation (Niklas) * tag 'ata-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: libata-core: fetch sense data for successful commands iff CDL enabled ata: libata-eh: do not thaw the port twice in ata_eh_reset() ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset() ata: pata_parport: Fix code style issues ata: libahci: clear pending interrupt status ata: sata_mv: Fix incorrect string length computation in mv_dump_mem() ata: libata: disallow dev-initiated LPM transitions to unsupported states
2023-09-16Merge tag 'usb-6.6-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fix from Greg KH: "Here is a single USB fix for a much-reported regression for 6.6-rc1. It resolves a crash in the typec debugfs code for many systems. It's been in linux-next with no reported issues, and many people have reported it resolving their problem with 6.6-rc1" * tag 'usb-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: ucsi: Fix NULL pointer dereference
2023-09-16Merge tag 'driver-core-6.6-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here is a single driver core fix for a much-reported-by-sysbot issue that showed up in 6.6-rc1. It's been submitted by many people, all in the same way, so it obviously fixes things for them all. Also in here is a single documentation update adding riscv to the embargoed hardware document in case there are any future issues with that processor family. Both of these have been in linux-next with no reported problems" * tag 'driver-core-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Documentation: embargoed-hardware-issues.rst: Add myself for RISC-V driver core: return an error when dev_set_name() hasn't happened
2023-09-16Merge tag 'char-misc-6.6-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fix from Greg KH: "Here is a single patch for 6.6-rc2 that reverts a 6.5 change for the comedi subsystem that has ended up being incorrect and caused drivers that were working for people to be unable to be able to be selected to build at all. To fix this, the Kconfig change needs to be reverted and a future set of fixes for the ioport dependancies will show up in 6.7-rc1 (there's no rush for them.) This has been in linux-next with no reported issues" * tag 'char-misc-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Revert "comedi: add HAS_IOPORT dependencies"
2023-09-16Merge tag 'i2c-for-6.6-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "The main thing is the removal of 'probe_new' because all i2c client drivers are converted now. Thanks Uwe, this marks the end of a long conversion process. Other than that, we have a few Kconfig updates and driver bugfixes" * tag 'i2c-for-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: cadence: Fix the kernel-doc warnings i2c: aspeed: Reset the i2c controller when timeout occurs i2c: I2C_MLXCPLD on ARM64 should depend on ACPI i2c: Make I2C_ATR invisible i2c: Drop legacy callback .probe_new() w1: ds2482: Switch back to use struct i2c_driver's .probe()
2023-09-16ata: libata-core: fetch sense data for successful commands iff CDL enabledNiklas Cassel
Currently, we fetch sense data for a _successful_ command if either: 1) Command was NCQ and ATA_DFLAG_CDL_ENABLED flag set (flag ATA_DFLAG_CDL_ENABLED will only be set if the Successful NCQ command sense data supported bit is set); or 2) Command was non-NCQ and regular sense data reporting is enabled. This means that case 2) will trigger for a non-NCQ command which has ATA_SENSE bit set, regardless if CDL is enabled or not. This decision was by design. If the device reports that it has sense data available, it makes sense to fetch that sense data, since the sk/asc/ascq could be important information regardless if CDL is enabled or not. However, the fetching of sense data for a successful command is done via ATA EH. Considering how intricate the ATA EH is, we really do not want to invoke ATA EH unless absolutely needed. Before commit 18bd7718b5c4 ("scsi: ata: libata: Handle completion of CDL commands using policy 0xD") we never fetched sense data for successful commands. In order to not invoke the ATA EH unless absolutely necessary, even if the device claims support for sense data reporting, only fetch sense data for successful (NCQ and non-NCQ commands) commands that are using CDL. [Damien] Modified the check to test the qc flag ATA_QCFLAG_HAS_CDL instead of the device support for CDL, which is implied for commands using CDL. Fixes: 3ac873c76d79 ("ata: libata-core: fix when to fetch sense data for successful commands") Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-09-16ata: libata-eh: do not thaw the port twice in ata_eh_reset()Niklas Cassel
commit 1e641060c4b5 ("libata: clear eh_info on reset completion") added a workaround that broke the retry mechanism in ATA EH. Tejun himself suggested to remove this workaround when it was identified to cause additional problems: https://lore.kernel.org/linux-ide/20110426135027.GI878@htj.dyndns.org/ He even said: "Hmm... it seems I wasn't thinking straight when I added that work around." https://lore.kernel.org/linux-ide/20110426155229.GM878@htj.dyndns.org/ While removing the workaround solved the issue, however, the workaround was kept to avoid "spurious hotplug events during reset", and instead another workaround was added on top of the existing workaround in commit 8c56cacc724c ("libata: fix unexpectedly frozen port after ata_eh_reset()"). Because these IRQs happened when the port was frozen, we know that they were actually a side effect of PxIS and IS.IPS(x) not being cleared before the COMRESET. This is now done in commit 94152042eaa9 ("ata: libahci: clear pending interrupt status"), so these workarounds can now be removed. Since commit 1e641060c4b5 ("libata: clear eh_info on reset completion") has now been reverted, the ATA EH retry mechanism is functional again, so there is once again no need to thaw the port more than once in ata_eh_reset(). This reverts "the workaround on top of the workaround" introduced in commit 8c56cacc724c ("libata: fix unexpectedly frozen port after ata_eh_reset()"). Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-24 12:59:36 +0000