summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-09-22Merge tag 'trace-v5.9-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Check kprobe is enabled before unregistering from ftrace as it isn't registered when disabled. - Remove kprobes enabled via command-line that is on init text when freed. - Add missing RCU synchronization for ftrace trampoline symbols removed from kallsyms. - Free trampoline on error path if ftrace_startup() fails. - Give more space for the longer PID numbers in trace output. - Fix a possible double free in the histogram code. - A couple of fixes that were discovered by sparse. * tag 'trace-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: bootconfig: init: make xbc_namebuf static kprobes: tracing/kprobes: Fix to kill kprobes on initmem after boot tracing: fix double free ftrace: Let ftrace_enable_sysctl take a kernel pointer buffer tracing: Make the space reserved for the pid wider ftrace: Fix missing synchronize_rcu() removing trampoline from kallsyms ftrace: Free the trampoline when ftrace_startup() fails kprobes: Fix to check probe enabled before disarm_kprobe_ftrace()
2020-09-22nvme-fc: fail new connections to a deleted host or remote portJames Smart
The lldd may have made calls to delete a remote port or local port and the delete is in progress when the cli then attempts to create a new controller. Currently, this proceeds without error although it can't be very successful. Fix this by validating that both the host port and remote port are present when a new controller is to be created. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-09-22nvme-pci: fix NULL req in completion handlerXianting Tian
Currently, we use nvmeq->q_depth as the upper limit for a valid tag in nvme_handle_cqe(), it is not correct. Because the available tag number is recorded in tagset, which is not equal to nvmeq->q_depth. The nvme driver registers interrupts for queues before initializing the tagset, because it uses the number of successful request_irq() calls to configure the tagset parameters. This allows a race condition with the current tag validity check if the controller happens to produce an interrupt with a corrupted CQE before the tagset is initialized. Replace the driver's indirect tag check with the one already provided by the block layer. Signed-off-by: Xianting Tian <tian.xianting@h3c.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-09-22nvme: return errors for hwmon initKeith Busch
Initializing the nvme hwmon retrieves a log from the controller. If the controller is broken, we need to return the appropriate error so that subsequent initialization doesn't attempt to continue. Reported-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-09-22Revert "ALSA: usb-audio: Disable Lenovo P620 Rear line-in volume control"Kai-Heng Feng
This reverts commit 34dedd2a83b241ba6aeb290260313c65dc58660e. According to Realtek, volume FU works for line-in. I can confirm volume control works after device firmware is updated. Fixes: 34dedd2a83b2 ("ALSA: usb-audio: Disable Lenovo P620 Rear line-in volume control") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20200915103925.12777-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-09-22dmaengine: dmatest: Prevent to run on misconfigured channelVladimir Murzin
Andy reported that commit 6b41030fdc79 ("dmaengine: dmatest: Restore default for channel") broke his scripts for the case where "busy" channel is used for configuration with expectation that run command would do nothing. Instead, behavior was (unintentionally) changed to treat such case as under-configuration and progress with defaults, i.e. run command would start a test with default setting for channel (which would use all channels). Restore original behavior with tracking status of channel setter so we can distinguish between misconfigured and under-configured cases in run command and act accordingly. Fixes: 6b41030fdc79 ("dmaengine: dmatest: Restore default for channel") Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200922115847.30100-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-22btrfs: fix put of uninitialized kobject after seed device deleteAnand Jain
The following test case leads to NULL kobject free error: mount seed /mnt add sprout to /mnt umount /mnt mount sprout to /mnt delete seed kobject: '(null)' (00000000dd2b87e4): is not initialized, yet kobject_put() is being called. WARNING: CPU: 1 PID: 15784 at lib/kobject.c:736 kobject_put+0x80/0x350 RIP: 0010:kobject_put+0x80/0x350 :: Call Trace: btrfs_sysfs_remove_devices_dir+0x6e/0x160 [btrfs] btrfs_rm_device.cold+0xa8/0x298 [btrfs] btrfs_ioctl+0x206c/0x22a0 [btrfs] ksys_ioctl+0xe2/0x140 __x64_sys_ioctl+0x1e/0x29 do_syscall_64+0x96/0x150 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f4047c6288b :: This is because, at the end of the seed device-delete, we try to remove the seed's devid sysfs entry. But for the seed devices under the sprout fs, we don't initialize the devid kobject yet. So add a kobject state check, which takes care of the bug. Fixes: 668e48af7a94 ("btrfs: sysfs, add devid/dev_state kobject and device attributes") CC: stable@vger.kernel.org # 5.6+ Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-09-22iio: adc: qcom-spmi-adc5: fix driver nameDmitry Baryshkov
Remove superfluous '.c' from qcom-spmi-adc5 device driver name. Fixes: e13d757279bb ("iio: adc: Add QCOM SPMI PMIC5 ADC driver") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200910140000.324091-2-dmitry.baryshkov@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-09-22MIPS: Loongson-3: Fix fp register access if MSA enabledHuacai Chen
If MSA is enabled, FPU_REG_WIDTH is 128 rather than 64, then get_fpr64() /set_fpr64() in the original unaligned instruction emulation code access the wrong fp registers. This is because the current code doesn't specify the correct index field, so fix it. Fixes: f83e4f9896eff614d0f2547a ("MIPS: Loongson-3: Add some unaligned instructions emulation") Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Pei Huang <huangpei@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-09-22Merge remote-tracking branch 'origin/master' into drm-intel-fixesJani Nikula
Direct backmerge to get commit 88b67edd7247 ("dax: Fix compilation for CONFIG_DAX && !CONFIG_FS_DAX") to fix CI build issues. Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-09-22media: dt-bindings: media: imx274: Convert to json-schemaJacopo Mondi
Convert the imx274 bindings document to json-schema and update the MAINTAINERS file accordingly. Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-22staging: r8188eu: replace WIFI_REASON_CODE enum with native ieee80211_reasoncodeIvan Safonov
WIFI_REASON_CODE is duplication of enum ieee80211_reasoncode. Signed-off-by: Ivan Safonov <insafonov@gmail.com> Link: https://lore.kernel.org/r/20200919212443.264126-1-insafonov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-22staging: hikey9xx: Fix incorrect assignmentAlex Dewar
In hi3670_phy_probe(), when reading property tx-vboost-lvl fails, its default value is assigned to priv->eye_diagram_param, rather than to priv->tx_vboost_lvl. Fix this. Fixes: 8971a3b880b2 ("staging: hikey9xx: add USB physical layer for Kirin 3670") Addresses-Coverity: CID 1497107: Incorrect expression (COPY_PASTE_ERROR) Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> Link: https://lore.kernel.org/r/20200921212146.34662-1-alex.dewar90@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-22staging: rtl8192u: clean up comparsions to NULLMichael Straube
Clean up comparsions to NULL reported by checkpatch. if (x == NULL) -> if (!x) if (x != NULL) -> if (x) Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20200919150823.16923-3-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-22staging: rtl8192u: correct placement of else ifMichael Straube
Move 'else if' to the same line as the closing brace of the corresponding 'if' to follow kernel coding style. Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20200919150823.16923-2-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-22staging: rtl8192u: clean up blank line style issuesMichael Straube
Add missing and remove unnecessary blank lines to clear checkpatch issues. CHECK: Please use a blank line after function/struct/union/enum declarations CHECK: Blank lines aren't necessary before a close brace '}' CHECK: Please don't use multiple blank lines CHECK: Blank lines aren't necessary after an open brace '{' Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20200919150823.16923-1-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-22staging: rtl8188eu: clean up alignment style issuesMichael Straube
Clean up alignment style issues to follow kernel coding style and clear checkpatch issues. CHECK: Alignment should match open parenthesis Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20200919090040.9613-2-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-22staging: rtl8188eu: clean up block comment style issuesMichael Straube
Clean up block comment style issues to follow kernel coding style and clear checkpatch warnings. WARNING: Block comments should align the * on each line WARNING: Block comments use a trailing */ on a separate line WARNING: Block comments use * on subsequent lines Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20200919090040.9613-1-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-22staging: rtl8712: use shorter array initializationsMichael Straube
Use empty brace syntax to initialize zero valued arrays. Simplifies and shortens the code a little bit. Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20200919085032.32453-2-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-22staging: rtl8712: clean up comparsions to NULLMichael Straube
Clean up comparsions to NULL Reported by checkpatch. if (x == NULL) -> if (!x) if (x != NULL) -> if (x) Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20200919085032.32453-1-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-22staging: spmi: hisi-spmi-controller: Use devm_ version of ioremap().Dan Carpenter
The ioremap() was never unmapped in the probe error handling or in the remove function. The fix is to use the devm_ioremap() function so it gets cleaned up automatically. Fixes: 70f59c90c819 ("staging: spmi: add Hikey 970 SPMI controller driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200918143338.GE909725@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-22staging/emxx_udc: fix indenting issue on a couple of statementsColin Ian King
A couple of statements are indented too deeply, remove the extraneous tabs. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200918214731.48750-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-22staging: vchiq: convert compat await_completionArnd Bergmann
Split out the ioctl implementation for VCHIQ_IOC_QUEUE_BULK_TRANSMIT into a separate function so it can be shared with the compat implementation. This one is the trickiest conversion, as the compat implementation is already quite different from the native one. By using a common handler, the behavior is changed to be the same again: The indirect __user pointer accesses are now handled through helper functions that check for compat mode internally. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200918095441.1446041-6-arnd@arndb.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-22staging: vchiq: convert compat bulk transferArnd Bergmann
Split out the ioctl implementation for VCHIQ_IOC_QUEUE_BULK_TRANSMIT into a separate function so it can be shared with the compat implementation. Here, the input data is converted separately in the compat handler, while the output data is passed as a __user pointer to thec vchiq_queue_bulk_transfer->mode word that is compatible. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200918095441.1446041-5-arnd@arndb.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-22staging: vchiq: convert compat dequeue_messageArnd Bergmann
Split out the ioctl implementation for VCHIQ_IOC_DEQUEUE_MESSAGE into a separate function so it can be shared with the compat implementation. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200918095441.1446041-4-arnd@arndb.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-22staging: vchiq: convert compat create_serviceArnd Bergmann
Split out the ioctl implementation for VCHIQ_IOC_CREATE_SERVICE into a separate function so it can be shared with the compat implementation. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200918095441.1446041-3-arnd@arndb.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-22staging: vchiq: rework compat handlingArnd Bergmann
The compat handlers for VCHIQ_IOC_QUEUE_MESSAGE32 and VCHIQ_IOC_GET_CONFIG32 can simply call the underlying implementations that are already separate functions rather than using copy_in_user to simulate the native 64-bit interface for the full ioctl handler. vchiq_ioc_queue_message gets a small update to the calling conventions to simplify the compat version by directly returning a normal errno value. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200918095441.1446041-2-arnd@arndb.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-22Merge tag 'iio-for-5.10b-take2' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of features and cleanups for IIO in 5.10 We have a couple of changes that apply to large sets of drivers, so I have grouped those to keep this short. There are a few late breaking fixes in here that can wait for the merge window. dt yaml conversions ------------------- * adi,ad7768-1 * adi,ad7949 * aspeed,ast2400 * cosmic,10001-adc * dlg,da9150-gpadc * fsl,imx25-gcq * fsl,imx7d-adc * fsl,vf610 * holt,hi8435 * marvell,berlin2-adc * motorola,cpcap-adc * nuvoton,nau7802 * nuvoton,npcm750-adc * nxp,lpc1850-adc * nxp,lpc3220 * sprd,sc2720-adc * st,stmpe-adc * ti,adc12138 * ti,ads1015 * ti,ads7950 * ti,twl4030-madc Features -------- * adxrs290 - Add triggered buffer support and expose data ready signal as a possible trigger. Includes updating bindings. - Add debugfs hooks for register access. * mlx90632 - Add a clear user interface to override the measured ambient temperature. * vl53l0x - Add IRQ support including dt bindings. Cleanups and minor fixes ------------------------ (groups) Replace mlock with local lock: * adf4350 * exynos-adc * fls-imx25-gcq * stm32-dac devm use to simplify probe error handling and remove functions. * adis16201 * adis16203 * adis16209 * adis16240 * adis16136 * adis16260 * adis16400 * adis16460 * adis16480 * adis library - drop unused adis_setup_buffer_and_trigger() of_match_ptr removal and incorrect ACPI binding removal of_match_ptr() rarely makes sense in an IIO driver as space saving is trivial and it breaks ACPI PRP0001 based instantiation. Mostly this series is about removing examples that get copied into new drivers. * ad2s1200 * ad5272 * ad5446 * ad5592r * ad5593r * ad5703 * ak8974 * ak8975 * ams-iaq-core * as3935 * atlas-sensor * ds1803 * hdc100x * htu21 * icp10100 * lmp91000 * pulsedlight * max30102 * max5432 * max5481 * mcp4018 * mcp4131 * mcp4531 * mcp4725 * ms5611 * ms5637 * si7020 * sgp30 * ti-dac082s085 * ti-dac5571 * tmp007 * tsys01 * vz89x * zpa2326 kernel-doc fixes * iio-core * ad7303 * ad7947 * adis16080 * adis16400 * iio_dummy_evgen * sgp30 Fixes for buffer alignment when passed to iio_push_to_buffers_with_timestamp() This is a long running effort. There are a few more drivers to come. * inv_mpu6050 * itg3200 * si1145 * st_lsm6dsx * ti-adc0832 * ti-adc12138 (not driver focused) * MAINTAINERS - Consolidate Analog Device IIO entries whilst removing Beniamin Bia. - Remove Hartmut Knaack as a listed IIO maintainer as he hasn't been active for a long time and people are getting intermitted bounces. * Add __printf() markings to a few functions that were missing them. * drop some rotted documentation from staging. * rework buffer sysfs file creation (precursor to multiple buffer support) (individual drivers) * ad5592r - Fix use of true for IIO_SHARED_BY_TYPE - Tidy up locking and indentation. * ad9467 - Improve error message on chip-id missmatch. - Use more appropriate error value if chip-id not recognised. * adis-library - Simplify burst mode handling. * adxrs290 - Make sure to switch device to standby mode during remove. * as73211 - Increase measurement timeout as seems some devices are slower. * bma180 - Fix use of true fo IIO_SHARED_BY_TYPE * exynos_adc - Update binding to require second interrut with touch screen. - Update binding to not require syscon on S5Pv210 * hmc5843 - Fix use of true for IIO_SHARED_BY_TYPE * inv_mpu6050 - Use regmap_noinc_read() for fifo reading. * palmas_gpadc - Use module_platform_driver() to remove boilerplate. * meson-saradc - style consistency fixes * rockchip_saradc - Allow compile testing with !ARM. * st_lsm6dsx - Changing scaling factor to use IIO_VAL_INT_PLUS_NANO to improve precision. - Fix an issue with unchecked return value. * stm32-adc - Fix a missing return introduced in dev_err_probe() patch earlier in cycle. * sx9310 - Prefer async mode for probe as paticularly slow startup. * vcnl4000 - Add missing interrupt property to dt binding. * tag 'iio-for-5.10b-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (126 commits) dt-bindings: iio: vishay,vcnl4000: add interrupts property iio:imu:inv_mpu6050: Use regmap_noinc_read for fifo reads. iio:imu:inv_mpu6050 Fix dma and ts alignment and data leak issues. iio:adc:ti-adc12138 Fix alignment issue with timestamp iio:adc:ti-adc0832 Fix alignment issue with timestamp iio:imu:st_lsm6dsx Fix alignment and data leak issues iio:light:si1145: Fix timestamp alignment and prevent data leak. iio:gyro:itg3200: Fix timestamp alignment and prevent data leak. iio:imu:st_lsm6dsx: check st_lsm6dsx_shub_read_output return iio: adc: exynos_adc: Replace indio_dev->mlock with own device lock dt-bindings:iio:adc:holt,hi8435 yaml conversion dt-bindings:iio:adc:adi,ad7768-1 yaml conversion dt-bindings:iio:adc:adi,ad7949 yaml conversion dt-bindings:iio:adc:dlg,da9150-gpadc yaml conversion dt-bindings:iio:adc:motorola,cpcap-adc yaml conversion dt-bindings:iio:adc:nxp,lpc3220-adc yaml conversion dt-bindings:iio:adc:nxp,lpc1850-adc yaml conversion dt-bindings:iio:adc:fsl,imx25-gcq yaml conversion dt-bindings:iio:adc:fsl,imx7d-adc yaml conversion dt-bindings:iio:adc:ti,ads1015 yaml conversion ...
2020-09-21tools/bootconfig: Add testcase for tailing spaceMasami Hiramatsu
Add testcases for removing/keeping tailing space in the value. Link: https://lkml.kernel.org/r/160068151151.1088739.3469541807296024227.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-09-21tools/bootconfig: Add testcases for repeated key with braceMasami Hiramatsu
Add a testcase for repeated key with brace parsing issue. Link: https://lkml.kernel.org/r/160068150176.1088739.409481347784771987.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-09-21lib/bootconfig: Fix to remove tailing spaces after valueMasami Hiramatsu
Fix to remove tailing spaces after value. If there is a space after value, the bootconfig failed to remove it because it applies strim() before replacing the delimiter with null. For example, foo = var # comment was parsed as below. foo="var " but user will expect foo="var" This fixes it by applying strim() after removing the delimiter. Link: https://lkml.kernel.org/r/160068149134.1088739.8868306567670058853.stgit@devnote2 Fixes: 76db5a27a827 ("bootconfig: Add Extra Boot Config support") Cc: Ingo Molnar <mingo@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-09-21lib/bootconfig: Fix a bug of breaking existing tree nodesMasami Hiramatsu
Fix a bug of breaking existing tree nodes by parsing the second and subsequent braces. Since the bootconfig parser uses the node.next field as a flag of current parent node, but this will break the existing tree if the same key node is specified again in the bootconfig. For example, the following bootconfig should be foo.buz and bar. foo bar foo { buz } However, when parsing the brace "{", it breaks foo->bar link by marking open-brace node. So the bootconfig unlinks bar from the bootconfig internal tree. This introduces a stack outside of the tree and record the last open-brace on the stack instead of using node.next field. Link: https://lkml.kernel.org/r/160068148267.1088739.8264704338030168660.stgit@devnote2 Fixes: 76db5a27a827 ("bootconfig: Add Extra Boot Config support") Cc: Ingo Molnar <mingo@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-09-21Merge branch 'Fix-broken-tc-flower-rules-for-mscc_ocelot-switches'David S. Miller
Vladimir Oltean says: ==================== Fix broken tc-flower rules for mscc_ocelot switches All 3 switch drivers from the Ocelot family have the same bug in the VCAP IS2 key offsets, which is that some keys are in the incorrect order. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net: mscc: ocelot: fix some key offsets for IP4_TCP_UDP VCAP IS2 entriesVladimir Oltean
The IS2 IP4_TCP_UDP key offsets do not correspond to the VSC7514 datasheet. Whether they work or not is unknown to me. On VSC9959 and VSC9953, with the same mistake and same discrepancy from the documentation, tc-flower src_port and dst_port rules did not work, so I am assuming the same is true here. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net: dsa: seville: fix some key offsets for IP4_TCP_UDP VCAP IS2 entriesVladimir Oltean
Since these were copied from the Felix VCAP IS2 code, and only the offsets were adjusted, the order of the bit fields is still wrong. Fix it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net: dsa: felix: fix some key offsets for IP4_TCP_UDP VCAP IS2 entriesXiaoliang Yang
Some of the IS2 IP4_TCP_UDP keys are not correct, like L4_DPORT, L4_SPORT and other L4 keys. This prevents offloaded tc-flower rules from matching on src_port and dst_port for TCP and UDP packets. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21inet_diag: validate INET_DIAG_REQ_PROTOCOL attributeEric Dumazet
User space could send an invalid INET_DIAG_REQ_PROTOCOL attribute as caught by syzbot. BUG: KMSAN: uninit-value in inet_diag_lock_handler net/ipv4/inet_diag.c:55 [inline] BUG: KMSAN: uninit-value in __inet_diag_dump+0x58c/0x720 net/ipv4/inet_diag.c:1147 CPU: 0 PID: 8505 Comm: syz-executor174 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x21c/0x280 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:122 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:219 inet_diag_lock_handler net/ipv4/inet_diag.c:55 [inline] __inet_diag_dump+0x58c/0x720 net/ipv4/inet_diag.c:1147 inet_diag_dump_compat+0x2a5/0x380 net/ipv4/inet_diag.c:1254 netlink_dump+0xb73/0x1cb0 net/netlink/af_netlink.c:2246 __netlink_dump_start+0xcf2/0xea0 net/netlink/af_netlink.c:2354 netlink_dump_start include/linux/netlink.h:246 [inline] inet_diag_rcv_msg_compat+0x5da/0x6c0 net/ipv4/inet_diag.c:1288 sock_diag_rcv_msg+0x24f/0x620 net/core/sock_diag.c:256 netlink_rcv_skb+0x6d7/0x7e0 net/netlink/af_netlink.c:2470 sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:275 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline] netlink_unicast+0x11c8/0x1490 net/netlink/af_netlink.c:1330 netlink_sendmsg+0x173a/0x1840 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:671 [inline] ____sys_sendmsg+0xc82/0x1240 net/socket.c:2353 ___sys_sendmsg net/socket.c:2407 [inline] __sys_sendmsg+0x6d1/0x820 net/socket.c:2440 __do_sys_sendmsg net/socket.c:2449 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2447 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2447 do_syscall_64+0x9f/0x140 arch/x86/entry/common.c:48 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x441389 Code: e8 fc ab 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 1b 09 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fff3b02ce98 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441389 RDX: 0000000000000000 RSI: 0000000020001500 RDI: 0000000000000003 RBP: 00000000006cb018 R08: 00000000004002c8 R09: 00000000004002c8 R10: 0000000000000004 R11: 0000000000000246 R12: 0000000000402130 R13: 00000000004021c0 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:143 [inline] kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:126 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:80 slab_alloc_node mm/slub.c:2907 [inline] __kmalloc_node_track_caller+0x9aa/0x12f0 mm/slub.c:4511 __kmalloc_reserve net/core/skbuff.c:142 [inline] __alloc_skb+0x35f/0xb30 net/core/skbuff.c:210 alloc_skb include/linux/skbuff.h:1094 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1176 [inline] netlink_sendmsg+0xdb9/0x1840 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:671 [inline] ____sys_sendmsg+0xc82/0x1240 net/socket.c:2353 ___sys_sendmsg net/socket.c:2407 [inline] __sys_sendmsg+0x6d1/0x820 net/socket.c:2440 __do_sys_sendmsg net/socket.c:2449 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2447 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2447 do_syscall_64+0x9f/0x140 arch/x86/entry/common.c:48 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 3f935c75eb52 ("inet_diag: support for wider protocol numbers") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Christoph Paasch <cpaasch@apple.com> Cc: Mat Martineau <mathew.j.martineau@linux.intel.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net: bridge: br_vlan_get_pvid_rcu() should dereference the VLAN group under RCUVladimir Oltean
When calling the RCU brother of br_vlan_get_pvid(), lockdep warns: ============================= WARNING: suspicious RCU usage 5.9.0-rc3-01631-g13c17acb8e38-dirty #814 Not tainted ----------------------------- net/bridge/br_private.h:1054 suspicious rcu_dereference_protected() usage! Call trace: lockdep_rcu_suspicious+0xd4/0xf8 __br_vlan_get_pvid+0xc0/0x100 br_vlan_get_pvid_rcu+0x78/0x108 The warning is because br_vlan_get_pvid_rcu() calls nbp_vlan_group() which calls rtnl_dereference() instead of rcu_dereference(). In turn, rtnl_dereference() calls rcu_dereference_protected() which assumes operation under an RCU write-side critical section, which obviously is not the case here. So, when the incorrect primitive is used to access the RCU-protected VLAN group pointer, READ_ONCE() is not used, which may cause various unexpected problems. I'm sad to say that br_vlan_get_pvid() and br_vlan_get_pvid_rcu() cannot share the same implementation. So fix the bug by splitting the 2 functions, and making br_vlan_get_pvid_rcu() retrieve the VLAN groups under proper locking annotations. Fixes: 7582f5b70f9a ("bridge: add br_vlan_get_pvid_rcu()") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21Merge tag 'mlx5-fixes-2020-09-18' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes-2020-09-18 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. v1->v2: Remove missing patch from -stable list. For -stable v5.1 ('net/mlx5: Fix FTE cleanup') For -stable v5.3 ('net/mlx5e: TLS, Do not expose FPGA TLS counter if not supported') ('net/mlx5e: Enable adding peer miss rules only if merged eswitch is supported') For -stable v5.7 ('net/mlx5e: Fix memory leak of tunnel info when rule under multipath not ready') For -stable v5.8 ('net/mlx5e: Use RCU to protect rq->xdp_prog') ('net/mlx5e: Fix endianness when calculating pedit mask first bit') ('net/mlx5e: Use synchronize_rcu to sync with NAPI') ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net: Update MAINTAINERS for MediaTek switch driverSean Wang
Update maintainers for MediaTek switch driver with Landen Chao who is familiar with MediaTek MT753x switch devices and will help maintenance from the vendor side. Cc: Steven Liu <steven.liu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Landen Chao <Landen.Chao@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net/mlx5e: mlx5e_fec_in_caps() returns a booleanSaeed Mahameed
Returning errno is a bug, fix that. Also fixes smatch warnings: drivers/net/ethernet/mellanox/mlx5/core/en/port.c:453 mlx5e_fec_in_caps() warn: signedness bug returning '(-95)' Fixes: 2132b71f78d2 ("net/mlx5e: Advertise globaly supported FEC modes") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Aya Levin <ayal@nvidia.com>
2020-09-21net/mlx5e: kTLS, Avoid kzalloc(GFP_KERNEL) under spinlockSaeed Mahameed
The spinlock only needed when accessing the channel's icosq, grab the lock after the buf allocation in resync_post_get_progress_params() to avoid kzalloc(GFP_KERNEL) in atomic context. Fixes: 0419d8c9d8f8 ("net/mlx5e: kTLS, Add kTLS RX resync support") Reported-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
2020-09-21net/mlx5e: kTLS, Fix leak on resync error flowSaeed Mahameed
Resync progress params buffer and dma weren't released on error, Add missing error unwinding for resync_post_get_progress_params(). Fixes: 0419d8c9d8f8 ("net/mlx5e: kTLS, Add kTLS RX resync support") Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
2020-09-21net/mlx5e: kTLS, Add missing dma_unmap in RX resyncSaeed Mahameed
Progress params dma address is never unmapped, unmap it when completion handling is over. Fixes: 0419d8c9d8f8 ("net/mlx5e: kTLS, Add kTLS RX resync support") Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
2020-09-21net/mlx5e: kTLS, Fix napi sync and possible use-after-freeTariq Toukan
Using synchronize_rcu() is sufficient to wait until running NAPI quits. See similar upstream fix with detailed explanation: ("net/mlx5e: Use synchronize_rcu to sync with NAPI") This change also fixes a possible use-after-free as the NAPI might be already released at this stage. Fixes: 0419d8c9d8f8 ("net/mlx5e: kTLS, Add kTLS RX resync support") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-09-21net/mlx5e: TLS, Do not expose FPGA TLS counter if not supportedTariq Toukan
The set of TLS TX global SW counters in mlx5e_tls_sw_stats_desc is updated from all rings by using atomic ops. This set of stats is used only in the FPGA TLS use case, not in the Connect-X TLS one, where regular per-ring counters are used. Do not expose them in the Connect-X use case, as this would cause counter duplication. For example, tx_tls_drop_no_sync_data would appear twice in the ethtool stats. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-09-21net/mlx5e: Fix using wrong stats_grps in mlx5e_update_ndo_stats()Alaa Hleihel
The cited commit started to reuse function mlx5e_update_ndo_stats() for the representors as well. However, the function is hard-coded to work on mlx5e_nic_stats_grps only. Due to this issue, the representors statistics were not updated in the output of "ip -s". Fix it to work with the correct group by extracting it from the caller's profile. Also, while at it and since this function became generic, move it to en_stats.c and rename it accordingly. Fixes: 8a236b15144b ("net/mlx5e: Convert rep stats to mlx5e_stats_grp-based infra") Signed-off-by: Alaa Hleihel <alaa@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-09-21net/mlx5e: Fix multicast counter not up-to-date in "ip -s"Ron Diskin
Currently the FW does not generate events for counters other than error counters. Unlike ".get_ethtool_stats", ".ndo_get_stats64" (which ip -s uses) might run in atomic context, while the FW interface is non atomic. Thus, 'ip' is not allowed to issue FW commands, so it will only display cached counters in the driver. Add a SW counter (mcast_packets) in the driver to count rx multicast packets. The counter also counts broadcast packets, as we consider it a special case of multicast. Use the counter value when calling "ip -s"/"ifconfig". Fixes: f62b8bb8f2d3 ("net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality") Signed-off-by: Ron Diskin <rondi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-09-21net/mlx5e: Fix endianness when calculating pedit mask first bitMaor Dickman
The field mask value is provided in network byte order and has to be converted to host byte order before calculating pedit mask first bit. Fixes: 88f30bbcbaaa ("net/mlx5e: Bit sized fields rewrite support") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-09-21net/mlx5e: Enable adding peer miss rules only if merged eswitch is supportedMaor Dickman
The cited commit creates peer miss group during switchdev mode initialization in order to handle miss packets correctly while in VF LAG mode. This is done regardless of FW support of such groups which could cause rules setups failure later on. Fix by adding FW capability check before creating peer groups/rule. Fixes: ac004b832128 ("net/mlx5e: E-Switch, Add peer miss rules") Signed-off-by: Maor Dickman <maord@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Raed Salem <raeds@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
generated by cgit (git 2.34.1) at 2025-09-22 19:33:43 +0000