summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-10-09net: dsa: hold rtnl_lock in dsa_switch_setup_tag_protocolVladimir Oltean
It was a documented fact that ds->ops->change_tag_protocol() offered rtnetlink mutex protection to the switch driver, since there was an ASSERT_RTNL right before the call in dsa_switch_change_tag_proto() (initiated from sysfs). The blamed commit introduced another call path for ds->ops->change_tag_protocol() which does not hold the rtnl_mutex. This is: dsa_tree_setup -> dsa_tree_setup_switches -> dsa_switch_setup -> dsa_switch_setup_tag_protocol -> ds->ops->change_tag_protocol() -> dsa_port_setup -> dsa_slave_create -> register_netdevice(slave_dev) -> dsa_tree_setup_master -> dsa_master_setup -> dev->dsa_ptr = cpu_dp The reason why the rtnl_mutex is held in the sysfs call path is to ensure that, once the master and all the DSA interfaces are down (which is required so that no packets flow), they remain down during the tagging protocol change. The above calling order illustrates the fact that it should not be risky to change the initial tagging protocol to the one specified in the device tree at the given time: - packets cannot enter the dsa_switch_rcv() packet type handler since netdev_uses_dsa() for the master will not yet return true, since dev->dsa_ptr has not yet been populated - packets cannot enter the dsa_slave_xmit() function because no DSA interface has yet been registered So from the DSA core's perspective, holding the rtnl_mutex is indeed not necessary. Yet, drivers may need to do things which need rtnl_mutex protection. For example: felix_set_tag_protocol -> felix_setup_tag_8021q -> dsa_tag_8021q_register -> dsa_tag_8021q_setup -> dsa_tag_8021q_port_setup -> vlan_vid_add -> ASSERT_RTNL These drivers do not really have a choice to take the rtnl_mutex themselves, since in the sysfs case, the rtnl_mutex is already held. Fixes: deff710703d8 ("net: dsa: Allow default tag protocol to be overridden from DT") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-09isdn: mISDN: Fix sleeping function called from invalid contextZheyu Ma
The driver can call card->isac.release() function from an atomic context. Fix this by calling this function after releasing the lock. The following log reveals it: [ 44.168226 ] BUG: sleeping function called from invalid context at kernel/workqueue.c:3018 [ 44.168941 ] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 5475, name: modprobe [ 44.169574 ] INFO: lockdep is turned off. [ 44.169899 ] irq event stamp: 0 [ 44.170160 ] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 44.170627 ] hardirqs last disabled at (0): [<ffffffff814209ed>] copy_process+0x132d/0x3e00 [ 44.171240 ] softirqs last enabled at (0): [<ffffffff81420a1a>] copy_process+0x135a/0x3e00 [ 44.171852 ] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 44.172318 ] Preemption disabled at: [ 44.172320 ] [<ffffffffa009b0a9>] nj_release+0x69/0x500 [netjet] [ 44.174441 ] Call Trace: [ 44.174630 ] dump_stack_lvl+0xa8/0xd1 [ 44.174912 ] dump_stack+0x15/0x17 [ 44.175166 ] ___might_sleep+0x3a2/0x510 [ 44.175459 ] ? nj_release+0x69/0x500 [netjet] [ 44.175791 ] __might_sleep+0x82/0xe0 [ 44.176063 ] ? start_flush_work+0x20/0x7b0 [ 44.176375 ] start_flush_work+0x33/0x7b0 [ 44.176672 ] ? trace_irq_enable_rcuidle+0x85/0x170 [ 44.177034 ] ? kasan_quarantine_put+0xaa/0x1f0 [ 44.177372 ] ? kasan_quarantine_put+0xaa/0x1f0 [ 44.177711 ] __flush_work+0x11a/0x1a0 [ 44.177991 ] ? flush_work+0x20/0x20 [ 44.178257 ] ? lock_release+0x13c/0x8f0 [ 44.178550 ] ? __kasan_check_write+0x14/0x20 [ 44.178872 ] ? do_raw_spin_lock+0x148/0x360 [ 44.179187 ] ? read_lock_is_recursive+0x20/0x20 [ 44.179530 ] ? __kasan_check_read+0x11/0x20 [ 44.179846 ] ? do_raw_spin_unlock+0x55/0x900 [ 44.180168 ] ? ____kasan_slab_free+0x116/0x140 [ 44.180505 ] ? _raw_spin_unlock_irqrestore+0x41/0x60 [ 44.180878 ] ? skb_queue_purge+0x1a3/0x1c0 [ 44.181189 ] ? kfree+0x13e/0x290 [ 44.181438 ] flush_work+0x17/0x20 [ 44.181695 ] mISDN_freedchannel+0xe8/0x100 [ 44.182006 ] isac_release+0x210/0x260 [mISDNipac] [ 44.182366 ] nj_release+0xf6/0x500 [netjet] [ 44.182685 ] nj_remove+0x48/0x70 [netjet] [ 44.182989 ] pci_device_remove+0xa9/0x250 Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-09ionic: don't remove netdev->dev_addr when syncing uc listShannon Nelson
Bridging, and possibly other upper stack gizmos, adds the lower device's netdev->dev_addr to its own uc list, and then requests it be deleted when the upper bridge device is removed. This delete request also happens with the bridging vlan_filtering is enabled and then disabled. Bonding has a similar behavior with the uc list, but since it also uses set_mac to manage netdev->dev_addr, it doesn't have the same the failure case. Because we store our netdev->dev_addr in our uc list, we need to ignore the delete request from dev_uc_sync so as to not lose the address and all hope of communicating. Note that ndo_set_mac_address is expressly changing netdev->dev_addr, so no limitation is set there. Fixes: 2a654540be10 ("ionic: Add Rx filter and rx_mode ndo support") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-08net: mana: Fix error handling in mana_create_rxq()Haiyang Zhang
Fix error handling in mana_create_rxq() when cq->gdma_id >= gc->max_num_cqs. Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Link: https://lore.kernel.org/r/1633698691-31721-1-git-send-email-haiyangz@microsoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-08isdn: cpai: check ctr->cnr to avoid array index out of boundXiaolong Huang
The cmtp_add_connection() would add a cmtp session to a controller and run a kernel thread to process cmtp. __module_get(THIS_MODULE); session->task = kthread_run(cmtp_session, session, "kcmtpd_ctr_%d", session->num); During this process, the kernel thread would call detach_capi_ctr() to detach a register controller. if the controller was not attached yet, detach_capi_ctr() would trigger an array-index-out-bounds bug. [ 46.866069][ T6479] UBSAN: array-index-out-of-bounds in drivers/isdn/capi/kcapi.c:483:21 [ 46.867196][ T6479] index -1 is out of range for type 'capi_ctr *[32]' [ 46.867982][ T6479] CPU: 1 PID: 6479 Comm: kcmtpd_ctr_0 Not tainted 5.15.0-rc2+ #8 [ 46.869002][ T6479] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 [ 46.870107][ T6479] Call Trace: [ 46.870473][ T6479] dump_stack_lvl+0x57/0x7d [ 46.870974][ T6479] ubsan_epilogue+0x5/0x40 [ 46.871458][ T6479] __ubsan_handle_out_of_bounds.cold+0x43/0x48 [ 46.872135][ T6479] detach_capi_ctr+0x64/0xc0 [ 46.872639][ T6479] cmtp_session+0x5c8/0x5d0 [ 46.873131][ T6479] ? __init_waitqueue_head+0x60/0x60 [ 46.873712][ T6479] ? cmtp_add_msgpart+0x120/0x120 [ 46.874256][ T6479] kthread+0x147/0x170 [ 46.874709][ T6479] ? set_kthread_struct+0x40/0x40 [ 46.875248][ T6479] ret_from_fork+0x1f/0x30 [ 46.875773][ T6479] Signed-off-by: Xiaolong Huang <butterflyhuangxx@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211008065830.305057-1-butterflyhuangxx@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-08Merge tag 's390-5.15-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Fix potential memory leak on a error path in eBPF - Fix handling of zpci device on reserve * tag 's390-5.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: fix zpci_zdev_put() on reserve bpf, s390: Fix potential memory leak about jit_data
2021-10-08mqprio: Correct stats in mqprio_dump_class_stats().Sebastian Andrzej Siewior
Introduction of lockless subqueues broke the class statistics. Before the change stats were accumulated in `bstats' and `qstats' on the stack which was then copied to struct gnet_dump. After the change the `bstats' and `qstats' are initialized to 0 and never updated, yet still fed to gnet_dump. The code updates the global qdisc->cpu_bstats and qdisc->cpu_qstats instead, clobbering them. Most likely a copy-paste error from the code in mqprio_dump(). __gnet_stats_copy_basic() and __gnet_stats_copy_queue() accumulate the values for per-CPU case but for global stats they overwrite the value, so only stats from the last loop iteration / tc end up in sch->[bq]stats. Use the on-stack [bq]stats variables again and add the stats manually in the global case. Fixes: ce679e8df7ed2 ("net: sched: add support for TCQ_F_NOLOCK subqueues to sch_mqprio") Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> https://lore.kernel.org/all/20211007175000.2334713-2-bigeasy@linutronix.de/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-08Merge branch 'dsa-bridge-tx-forwarding-offload-fixes-part-1'Jakub Kicinski
Vladimir Oltean says: ==================== DSA bridge TX forwarding offload fixes - part 1 This is part 1 of a series of fixes to the bridge TX forwarding offload feature introduced for v5.15. Sadly, the other fixes are so intrusive that they cannot be reasonably be sent to the "net" tree, as they also include API changes. So they are left as part 2 for net-next. ==================== Link: https://lore.kernel.org/r/20211007164711.2897238-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-08net: dsa: mv88e6xxx: isolate the ATU databases of standalone and bridged portsVladimir Oltean
Similar to commit 6087175b7991 ("net: dsa: mt7530: use independent VLAN learning on VLAN-unaware bridges"), software forwarding between an unoffloaded LAG port (a bonding interface with an unsupported policy) and a mv88e6xxx user port directly under a bridge is broken. We adopt the same strategy, which is to make the standalone ports not find any ATU entry learned on a bridge port. Theory: the mv88e6xxx ATU is looked up by FID and MAC address. There are as many FIDs as VIDs (4096). The FID is derived from the VID when possible (the VTU maps a VID to a FID), with a fallback to the port based default FID value when not (802.1Q Mode is disabled on the port, or the classified VID isn't present in the VTU). The mv88e6xxx driver makes the following use of FIDs and VIDs: - the port's DefaultVID (to which untagged & pvid-tagged packets get classified) is 0 and is absent from the VTU, so this kind of packets is processed in FID 0, the default FID assigned by mv88e6xxx_setup_port. - every time a bridge VLAN is created, mv88e6xxx_port_vlan_join() -> mv88e6xxx_atu_new() associates a FID with that VID which increases linearly starting from 1. Like this: bridge vlan add dev lan0 vid 100 # FID 1 bridge vlan add dev lan1 vid 100 # still FID 1 bridge vlan add dev lan2 vid 1024 # FID 2 The FID allocation made by the driver is sub-optimal for the following reasons: (a) A standalone port has a DefaultPVID of 0 and a default FID of 0 too. A VLAN-unaware bridged port has a DefaultPVID of 0 and a default FID of 0 too. The difference is that the bridged ports may learn ATU entries, while the standalone port has the requirement that it must not, and must not find them either. Standalone ports must not use the same FID as ports belonging to a bridge. All standalone ports can use the same FID, since the ATU will never have an entry in that FID. (b) Multiple VLAN-unaware bridges will all use a DefaultPVID of 0 and a default FID of 0 on all their ports. The FDBs will not be isolated between these bridges. Every VLAN-unaware bridge must use the same FID on all its ports, different from the FID of other bridge ports. (c) Each bridge VLAN uses a unique FID which is useful for Independent VLAN Learning, but the same VLAN ID on multiple VLAN-aware bridges will result in the same FID being used by mv88e6xxx_atu_new(). The correct behavior is for VLAN 1 in br0 to have a different FID compared to VLAN 1 in br1. This patch cannot fix all the above. Traditionally the DSA framework did not care about this, and the reality is that DSA core involvement is needed for the aforementioned issues to be solved. The only thing we can solve here is an issue which does not require API changes, and that is issue (a), aka use a different FID for standalone ports vs ports under VLAN-unaware bridges. The first step is deciding what VID and FID to use for standalone ports, and what VID and FID for bridged ports. The 0/0 pair for standalone ports is what they used up till now, let's keep using that. For bridged ports, there are 2 cases: - VLAN-aware ports will never end up using the port default FID, because packets will always be classified to a VID in the VTU or dropped otherwise. The FID is the one associated with the VID in the VTU. - On VLAN-unaware ports, we _could_ leave their DefaultVID (pvid) at zero (just as in the case of standalone ports), and just change the port's default FID from 0 to a different number (say 1). However, Tobias points out that there is one more requirement to cater to: cross-chip bridging. The Marvell DSA header does not carry the FID in it, only the VID. So once a packet crosses a DSA link, if it has a VID of zero it will get classified to the default FID of that cascade port. Relying on a port default FID for upstream cascade ports results in contradictions: a default FID of 0 breaks ATU isolation of bridged ports on the downstream switch, a default FID of 1 breaks standalone ports on the downstream switch. So not only must standalone ports have different FIDs compared to bridged ports, they must also have different DefaultVID values. IEEE 802.1Q defines two reserved VID values: 0 and 4095. So we simply choose 4095 as the DefaultVID of ports belonging to VLAN-unaware bridges, and VID 4095 maps to FID 1. For the xmit operation to look up the same ATU database, we need to put VID 4095 in DSA tags sent to ports belonging to VLAN-unaware bridges too. All shared ports are configured to map this VID to the bridging FID, because they are members of that VLAN in the VTU. Shared ports don't need to have 802.1QMode enabled in any way, they always parse the VID from the DSA header, they don't need to look at the 802.1Q header. We install VID 4095 to the VTU in mv88e6xxx_setup_port(), with the mention that mv88e6xxx_vtu_setup() which was located right below that call was flushing the VTU so those entries wouldn't be preserved. So we need to relocate the VTU flushing prior to the port initialization during ->setup(). Also note that this is why it is safe to assume that VID 4095 will get associated with FID 1: the user ports haven't been created, so there is no avenue for the user to create a bridge VLAN which could otherwise race with the creation of another FID which would otherwise use up the non-reserved FID value of 1. [ Currently mv88e6xxx_port_vlan_join() doesn't have the option of specifying a preferred FID, it always calls mv88e6xxx_atu_new(). ] mv88e6xxx_port_db_load_purge() is the function to access the ATU for FDB/MDB entries, and it used to determine the FID to use for VLAN-unaware FDB entries (VID=0) using mv88e6xxx_port_get_fid(). But the driver only called mv88e6xxx_port_set_fid() once, during probe, so no surprises, the port FID was always 0, the call to get_fid() was redundant. As much as I would have wanted to not touch that code, the logic is broken when we add a new FID which is not the port-based default. Now the port-based default FID only corresponds to standalone ports, and FDB/MDB entries belong to the bridging service. So while in the future, when the DSA API will support FDB isolation, we will have to figure out the FID based on the bridge number, for now there's a single bridging FID, so hardcode that. Lastly, the tagger needs to check, when it is transmitting a VLAN untagged skb, whether it is sending it towards a bridged or a standalone port. When we see it is bridged we assume the bridge is VLAN-unaware. Not because it cannot be VLAN-aware but: - if we are transmitting from a VLAN-aware bridge we are likely doing so using TX forwarding offload. That code path guarantees that skbs have a vlan hwaccel tag in them, so we would not enter the "else" branch of the "if (skb->protocol == htons(ETH_P_8021Q))" condition. - if we are transmitting on behalf of a VLAN-aware bridge but with no TX forwarding offload (no PVT support, out of space in the PVT, whatever), we would indeed be transmitting with VLAN 4095 instead of the bridge device's pvid. However we would be injecting a "From CPU" frame, and the switch won't learn from that - it only learns from "Forward" frames. So it is inconsequential for address learning. And VLAN 4095 is absolutely enough for the frame to exit the switch, since we never remove that VLAN from any port. Fixes: 57e661aae6a8 ("net: dsa: mv88e6xxx: Link aggregation support") Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-08net: dsa: mv88e6xxx: keep the pvid at 0 when VLAN-unawareVladimir Oltean
The VLAN support in mv88e6xxx has a loaded history. Commit 2ea7a679ca2a ("net: dsa: Don't add vlans when vlan filtering is disabled") noticed some issues with VLAN and decided the best way to deal with them was to make the DSA core ignore VLANs added by the bridge while VLAN awareness is turned off. Those issues were never explained, just presented as "at least one corner case". That approach had problems of its own, presented by commit 54a0ed0df496 ("net: dsa: provide an option for drivers to always receive bridge VLANs") for the DSA core, followed by commit 1fb74191988f ("net: dsa: mv88e6xxx: fix vlan setup") which applied ds->configure_vlan_while_not_filtering = true for mv88e6xxx in particular. We still don't know what corner case Andrew saw when he wrote commit 2ea7a679ca2a ("net: dsa: Don't add vlans when vlan filtering is disabled"), but Tobias now reports that when we use TX forwarding offload, pinging an external station from the bridge device is broken if the front-facing DSA user port has flooding turned off. The full description is in the link below, but for short, when a mv88e6xxx port is under a VLAN-unaware bridge, it inherits that bridge's pvid. So packets ingressing a user port will be classified to e.g. VID 1 (assuming that value for the bridge_default_pvid), whereas when tag_dsa.c xmits towards a user port, it always sends packets using a VID of 0 if that port is standalone or under a VLAN-unaware bridge - or at least it did so prior to commit d82f8ab0d874 ("net: dsa: tag_dsa: offload the bridge forwarding process"). In any case, when there is a conversation between the CPU and a station connected to a user port, the station's MAC address is learned in VID 1 but the CPU tries to transmit through VID 0. The packets reach the intended station, but via flooding and not by virtue of matching the existing ATU entry. DSA has established (and enforced in other drivers: sja1105, felix, mt7530) that a VLAN-unaware port should use a private pvid, and not inherit the one from the bridge. The bridge's pvid should only be inherited when that bridge is VLAN-aware, so all state transitions need to be handled. On the other hand, all bridge VLANs should sit in the VTU starting with the moment when the bridge offloads them via switchdev, they are just not used. This solves the problem that Tobias sees because packets ingressing on VLAN-unaware user ports now get classified to VID 0, which is also the VID used by tag_dsa.c on xmit. Fixes: d82f8ab0d874 ("net: dsa: tag_dsa: offload the bridge forwarding process") Link: https://patchwork.kernel.org/project/netdevbpf/patch/20211003222312.284175-2-vladimir.oltean@nxp.com/#24491503 Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-08net: dsa: tag_dsa: send packets with TX fwd offload from VLAN-unaware ↵Vladimir Oltean
bridges using VID 0 The present code is structured this way due to an incomplete thought process. In Documentation/networking/switchdev.rst we document that if a bridge is VLAN-unaware, then the presence or lack of a pvid on a bridge port (or on the bridge itself, for that matter) should not affect the ability to receive and transmit tagged or untagged packets. If the bridge on behalf of which we are sending this packet is VLAN-aware, then the TX forwarding offload API ensures that the skb will be VLAN-tagged (if the packet was sent by user space as untagged, it will get transmitted town to the driver as tagged with the bridge device's pvid). But if the bridge is VLAN-unaware, it may or may not be VLAN-tagged. In fact the logic to insert the bridge's PVID came from the idea that we should emulate what is being done in the VLAN-aware case. But we shouldn't. It appears that injecting packets using a VLAN ID of 0 serves the purpose of forwarding the packets to the egress port with no VLAN tag added or stripped by the hardware, and no filtering being performed. So we can simply remove the superfluous logic. One reason why this logic is broken is that when CONFIG_BRIDGE_VLAN_FILTERING=n, we call br_vlan_get_pvid_rcu() but that returns an error and we do error out, dropping all packets on xmit. Not really smart. This is also an issue when the user deletes the bridge pvid: $ bridge vlan del dev br0 vid 1 self As mentioned, in both cases, packets should still flow freely, and they do just that on any net device where the bridge is not offloaded, but on mv88e6xxx they don't. Fixes: d82f8ab0d874 ("net: dsa: tag_dsa: offload the bridge forwarding process") Reported-by: Andrew Lunn <andrew@lunn.ch> Link: https://patchwork.kernel.org/project/netdevbpf/patch/20211003155141.2241314-1-andrew@lunn.ch/ Link: https://patchwork.kernel.org/project/netdevbpf/patch/20210928233708.1246774-1-vladimir.oltean@nxp.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-08net: dsa: fix bridge_num not getting cleared after ports leaving the bridgeVladimir Oltean
The dp->bridge_num is zero-based, with -1 being the encoding for an invalid value. But dsa_bridge_num_put used to check for an invalid value by comparing bridge_num with 0, which is of course incorrect. The result is that the bridge_num will never get cleared by dsa_bridge_num_put, and further port joins to other bridges will get a bridge_num larger than the previous one, and once all the available bridges with TX forwarding offload supported by the hardware get exhausted, the TX forwarding offload feature is simply disabled. In the case of sja1105, 7 iterations of the loop below are enough to exhaust the TX forwarding offload bits, and further bridge joins operate without that feature. ip link add br0 type bridge vlan_filtering 1 while :; do ip link set sw0p2 master br0 && sleep 1 ip link set sw0p2 nomaster && sleep 1 done This issue is enough of an indication that having the dp->bridge_num invalid encoding be a negative number is prone to bugs, so this will be changed to a one-based value, with the dp->bridge_num of zero being the indication of no bridge. However, that is material for net-next. Fixes: f5e165e72b29 ("net: dsa: track unique bridge numbers across all DSA switch trees") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-08Merge tag 'xtensa-20211008' of git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds
Pull xtensa fixes from Max Filippov: - fix build/boot issues caused by CONFIG_OF vs CONFIC_USE_OF usage - fix reset handler for xtfpga boards * tag 'xtensa-20211008' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: xtfpga: Try software restart before simulating CPU reset xtensa: xtfpga: use CONFIG_USE_OF instead of CONFIG_OF xtensa: call irqchip_init only when CONFIG_USE_OF is selected xtensa: use CONFIG_USE_OF instead of CONFIG_OF
2021-10-08Merge tag 'for-linus-5.15b-rc5-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - fix two minor issues in the Xen privcmd driver plus a cleanup patch for that driver - fix multiple issues related to running as PVH guest and some related earlyprintk fixes for other Xen guest types - fix an issue introduced in 5.15 the Xen balloon driver * tag 'for-linus-5.15b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: fix cancelled balloon action xen/x86: adjust data placement x86/PVH: adjust function/data placement xen/x86: hook up xen_banner() also for PVH xen/x86: generalize preferred console model from PV to PVH Dom0 xen/x86: make "earlyprintk=xen" work for HVM/PVH DomU xen/x86: allow "earlyprintk=xen" to work for PV Dom0 xen/x86: make "earlyprintk=xen" work better for PVH Dom0 xen/x86: allow PVH Dom0 without XEN_PV=y xen/x86: prevent PVH type from getting clobbered xen/privcmd: drop "pages" parameter from xen_remap_pfn() xen/privcmd: fix error handling in mmap-resource processing xen/privcmd: replace kcalloc() by kvcalloc() when allocating empty pages
2021-10-08Merge tag 'asm-generic-fixes-5.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic fixes from Arnd Bergmann: "There is one build fix for Arm platforms that ended up impacting most architectures because of the way the drivers/firmware Kconfig file is wired up: The CONFIG_QCOM_SCM dependency have caused a number of randconfig regressions over time, and some still remain in v5.15-rc4. The fix we agreed on in the end is to make this symbol selected by any driver using it, and then building it even for non-Arm platforms with CONFIG_COMPILE_TEST. To make this work on all architectures, the drivers/firmware/Kconfig file needs to be included for all architectures to make the symbol itself visible. In a separate discussion, we found that a sound driver patch that is pending for v5.16 needs the same change to include this Kconfig file, so the easiest solution seems to have my Kconfig rework included in v5.15. Finally, the branch also includes a small unrelated build fix for NOMMU architectures" Link: https://lore.kernel.org/all/20210928153508.101208f8@canb.auug.org.au/ Link: https://lore.kernel.org/all/20210928075216.4193128-1-arnd@kernel.org/ Link: https://lore.kernel.org/all/20211007151010.333516-1-arnd@kernel.org/ * tag 'asm-generic-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic/io.h: give stub iounmap() on !MMU same prototype as elsewhere qcom_scm: hide Kconfig symbol firmware: include drivers/firmware/Kconfig unconditionally
2021-10-08Merge tag 'acpi-5.15-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Fix a recent ACPI-related regression in the PCI subsystem that introduced a NULL pointer dereference possible to trigger from user space via sysfs on some systems" * tag 'acpi-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PCI: ACPI: Check parent pointer in acpi_pci_find_companion()
2021-10-08Merge tag 'usb-5.15-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for 5.15-rc5 that resolve a number of reported issues: - gadget driver fixes - xhci build warning fixes - build configuration fix - cdc-acm tty handling fixes - cdc-wdm fix - typec fixes All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: cdc-acm: fix break reporting USB: cdc-acm: fix racy tty buffer accesses usb: gadget: f_uac2: fixed EP-IN wMaxPacketSize usb: cdc-wdm: Fix check for WWAN usb: chipidea: ci_hdrc_imx: Also search for 'phys' phandle usb: typec: tcpm: handle SRC_STARTUP state if cc changes usb: typec: tcpci: don't handle vSafe0V event if it's not enabled usb: typec: tipd: Remove dependency on "connector" child fwnode Partially revert "usb: Kconfig: using select for USB_COMMON dependency" usb: dwc3: gadget: Revert "set gadgets parent to the right controller" usb: xhci: tegra: mark PM functions as __maybe_unused
2021-10-08Merge tag 'mmc-v5.15-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "A couple of MMC host fixes: - meson-gx: Fix read/write access for dram-access-quirk - sdhci-of-at91: Fix calibration sequence" * tag 'mmc-v5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: meson-gx: do not use memcpy_to/fromio for dram-access-quirk mmc: sdhci-of-at91: replace while loop with read_poll_timeout mmc: sdhci-of-at91: wait for calibration done before proceed
2021-10-08Merge tag 'drm-fixes-2021-10-08' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "I've returned from my tropical island retreat, even managed to bring one of my kids on a dive with some turtles. Thanks to Daniel for doing last week's work. Otherwise this is the weekly fixes pull, it's a bit bigger because the vc4 reverts in your tree caused some problems with fixes in the drm-misc tree so it got left out last week, so this week has the misc fixes rebased without the vc4 pieces. Otherwise it's i915, amdgpu with the usual fixes and a scattering over other drivers. I expect things should calm down a bit more next week. core: - Kconfig fix for fb_simple vs simpledrm. i915: - Fix RKL HDMI audio - Fix runtime pm imbalance on i915_gem_shrink() error path - Fix Type-C port access before hw/sw state sync - Fix VBT backlight struct version/size check - Fix VT-d async flip on SKL/BXT with plane stretch workaround amdgpu: - DCN 3.1 DP alt mode fixes - S0ix gfxoff fix - Fix DRM_AMD_DC_SI dependencies - PCIe DPC handling fix - DCN 3.1 scaling fix - Documentation fix amdkfd: - Fix potential memory leak - IOMMUv2 init fixes vc4 (there were some hdmi fixes but things got reverted, sort it out later): - compiler fix nouveau: - Cursor fix - Fix ttm buffer moves for ampere gpu's by adding minimal acceleration support. - memory leak fixes rockchip: - crtc/clk fixup panel: - ili9341 Fix DT bindings indent - y030xx067a - yellow tint init seq fix gbefb: - Fix gbefb when built with COMPILE_TEST" * tag 'drm-fixes-2021-10-08' of git://anongit.freedesktop.org/drm/drm: (33 commits) drm/amd/display: Fix detection of 4 lane for DPALT drm/amd/display: Limit display scaling to up to 4k for DCN 3.1 drm/amd/display: Skip override for preferred link settings during link training drm/nouveau/debugfs: fix file release memory leak drm/nouveau/kms/nv50-: fix file release memory leak drm/nouveau: avoid a use-after-free when BO init fails DRM: delete DRM IRQ legacy midlayer docs video: fbdev: gbefb: Only instantiate device when built for IP32 fbdev: simplefb: fix Kconfig dependencies drm/panel: abt-y030xx067a: yellow tint fix dt-bindings: panel: ili9341: correct indentation drm/nouveau/fifo/ga102: initialise chid on return from channel creation drm/rockchip: Update crtc fixup to account for fractional clk change drm/nouveau/ga102-: support ttm buffer moves via copy engine drm/nouveau/kms/tu102-: delay enabling cursor until after assign_windows drm/sun4i: dw-hdmi: Fix HDMI PHY clock setup drm/vc4: hdmi: Remove unused struct drm/kmb: Enable alpha blended second plane drm/amdgpu: handle the case of pci_channel_io_frozen only in amdgpu_pci_resume drm/amdgpu: init iommu after amdkfd device init ...
2021-10-08nfc: nci: fix the UAF of rf_conn_info objectLin Ma
The nci_core_conn_close_rsp_packet() function will release the conn_info with given conn_id. However, it needs to set the rf_conn_info to NULL to prevent other routines like nci_rf_intf_activated_ntf_packet() to trigger the UAF. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-08ASoC: rockchip: i2s-tdm: Fix error handling on i2s_tdm_prepare_enable_mclk ↵Colin Ian King
failure In the case where the call to i2s_tdm_prepare_enable_mclk fails the function returns before the error handling goto is executed. Fix this by removing the return do perform the intended error handling exit. Fixes: 081068fd6414 ("ASoC: rockchip: add support for i2s-tdm controller") Addresses-Coverity: ("Structurally dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Message-Id: <20211008095430.62680-2-colin.king@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-08ASoC: rockchip: i2s-tdm: Remove call to rockchip_i2s_ch_to_ioColin Ian King
The call to rockchip_i2s_ch_to_io is only useful for its return value which is not being used. The function call also has no side effects, the call is effectively useless and can be removed. Addresses-Coverity: ("Useless call") Signed-off-by: Colin Ian King <colin.king@canonical.com> Message-Id: <20211008095430.62680-1-colin.king@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-08ASoC: mediatek: mt8195: update audsys clock parent nameTrevor Wu
Because clock names are modified in mediatek CCF driver, sync the updated clock names to audsys driver. Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Message-Id: <20211008070424.14347-1-trevor.wu@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-08Merge series "ASoC: rt9120: Add Richtek RT9120 supprot" from cy_huang ↵Mark Brown
<u0084500@gmail.com> ChiYuan Huang <cy_huang@richtek.com>: From: ChiYuan Huang <cy_huang@richtek.com> This patch series Add the Richtek RT9120 support. In v3: - Add dvdd regulator binding to check the dvdd voltage domain. - Refine sdo_select_text. - Use switch case in 'internal_power_event' function. - Remove the volume and mute initially write in component probe. - Remove the mute API. It's no need by HW design. In v2: - Add missing #sound-dai-cells property. ChiYuan Huang (2): ASoC: dt-bindings: rt9120: Add initial bindings ASoC: rt9120: Add rt9210 audio amplifier support .../devicetree/bindings/sound/richtek,rt9120.yaml | 59 +++ sound/soc/codecs/Kconfig | 10 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/rt9120.c | 489 +++++++++++++++++++++ 4 files changed, 560 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/richtek,rt9120.yaml create mode 100644 sound/soc/codecs/rt9120.c -- 2.7.4
2021-10-08Merge series "ASoC: Intel: bytcht_es8316: few cleanups" from Andy Shevchenko ↵Mark Brown
<andriy.shevchenko@linux.intel.com>: The small set of cleanups against bytcht_es8316 board file. In v4: - fixed Pierre's email (Pierre) - added Hans to the Cc list In v3: - actually added a Pierre's tag (Mark) In v2: - added tag (Pierre) - added commit message to the patch 2 (Joe) Andy Shevchenko (4): ASoC: Intel: bytcht_es8316: Get platform data via dev_get_platdata() ASoC: Intel: bytcht_es8316: Use temporary variable for struct device ASoC: Intel: bytcht_es8316: Switch to use gpiod_get_optional() ASoC: Intel: bytcht_es8316: Utilize dev_err_probe() to avoid log saturation sound/soc/intel/boards/bytcht_es8316.c | 37 +++++++++----------------- 1 file changed, 12 insertions(+), 25 deletions(-) -- 2.33.0
2021-10-08net/smc: improved fix wait on already cleared linkKarsten Graul
Commit 8f3d65c16679 ("net/smc: fix wait on already cleared link") introduced link refcounting to avoid waits on already cleared links. This patch extents and improves the refcounting to cover all remaining possible cases for this kind of error situation. Fixes: 15e1b99aadfb ("net/smc: no WR buffer wait for terminating link group") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-08Merge branch 'stmmac-regression-fix'David S. Miller
Merge branch 'stmmac-regression-fix' Herve Codina says: ==================== net: stmmac: fix regression on SPEAr3xx SOC The ethernet driver used on old SPEAr3xx soc was previously supported on old kernel. Some regressions were introduced during the different updates leading to a broken driver for this soc. This series fixes these regressions and brings back ethernet on SPEAr3xx. Tested on a SPEAr320 board. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-08ARM: dts: spear3xx: Fix gmac nodeHerve Codina
On SPEAr3xx, ethernet driver is not compatible with the SPEAr600 one. Indeed, SPEAr3xx uses an earlier version of this IP (v3.40) and needs some driver tuning compare to SPEAr600. The v3.40 IP support was added to stmmac driver and this patch fixes this issue and use the correct compatible string for SPEAr3xx Signed-off-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-08net: stmmac: add support for dwmac 3.40aHerve Codina
dwmac 3.40a is an old ip version that can be found on SPEAr3xx soc. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-08dt-bindings: net: snps,dwmac: add dwmac 3.40a IP versionHerve Codina
dwmac 3.40a is an old ip version that can be found on SPEAr3xx soc. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-08net: stmmac: fix get_hw_feature() on old hardwareHerve Codina
Some old IPs do not provide the hardware feature register. On these IPs, this register is read 0x00000000. In old driver version, this feature was handled but a regression came with the commit f10a6a3541b4 ("stmmac: rework get_hw_feature function"). Indeed, this commit removes the return value in dma->get_hw_feature(). This return value was used to indicate the validity of retrieved information and used later on in stmmac_hw_init() to override priv->plat data if this hardware feature were valid. This patch restores the return code in ->get_hw_feature() in order to indicate the hardware feature validity and override priv->plat data only if this hardware feature is valid. Fixes: f10a6a3541b4 ("stmmac: rework get_hw_feature function") Signed-off-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-08mptcp: fix possible stall on recvmsg()Paolo Abeni
recvmsg() can enter an infinite loop if the caller provides the MSG_WAITALL, the data present in the receive queue is not sufficient to fulfill the request, and no more data is received by the peer. When the above happens, mptcp_wait_data() will always return with no wait, as the MPTCP_DATA_READY flag checked by such function is set and never cleared in such code path. Leveraging the above syzbot was able to trigger an RCU stall: rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 0-...!: (10499 ticks this GP) idle=0af/1/0x4000000000000000 softirq=10678/10678 fqs=1 (t=10500 jiffies g=13089 q=109) rcu: rcu_preempt kthread starved for 10497 jiffies! g13089 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=1 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_preempt state:R running task stack:28696 pid: 14 ppid: 2 flags:0x00004000 Call Trace: context_switch kernel/sched/core.c:4955 [inline] __schedule+0x940/0x26f0 kernel/sched/core.c:6236 schedule+0xd3/0x270 kernel/sched/core.c:6315 schedule_timeout+0x14a/0x2a0 kernel/time/timer.c:1881 rcu_gp_fqs_loop+0x186/0x810 kernel/rcu/tree.c:1955 rcu_gp_kthread+0x1de/0x320 kernel/rcu/tree.c:2128 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 rcu: Stack dump where RCU GP kthread last ran: Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 8510 Comm: syz-executor827 Not tainted 5.15.0-rc2-next-20210920-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:bytes_is_nonzero mm/kasan/generic.c:84 [inline] RIP: 0010:memory_is_nonzero mm/kasan/generic.c:102 [inline] RIP: 0010:memory_is_poisoned_n mm/kasan/generic.c:128 [inline] RIP: 0010:memory_is_poisoned mm/kasan/generic.c:159 [inline] RIP: 0010:check_region_inline mm/kasan/generic.c:180 [inline] RIP: 0010:kasan_check_range+0xc8/0x180 mm/kasan/generic.c:189 Code: 38 00 74 ed 48 8d 50 08 eb 09 48 83 c0 01 48 39 d0 74 7a 80 38 00 74 f2 48 89 c2 b8 01 00 00 00 48 85 d2 75 56 5b 5d 41 5c c3 <48> 85 d2 74 5e 48 01 ea eb 09 48 83 c0 01 48 39 d0 74 50 80 38 00 RSP: 0018:ffffc9000cd676c8 EFLAGS: 00000283 RAX: ffffed100e9a110e RBX: ffffed100e9a110f RCX: ffffffff88ea062a RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff888074d08870 RBP: ffffed100e9a110e R08: 0000000000000001 R09: ffff888074d08877 R10: ffffed100e9a110e R11: 0000000000000000 R12: ffff888074d08000 R13: ffff888074d08000 R14: ffff888074d08088 R15: ffff888074d08000 FS: 0000555556d8e300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 S: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000180 CR3: 0000000068909000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: instrument_atomic_read_write include/linux/instrumented.h:101 [inline] test_and_clear_bit include/asm-generic/bitops/instrumented-atomic.h:83 [inline] mptcp_release_cb+0x14a/0x210 net/mptcp/protocol.c:3016 release_sock+0xb4/0x1b0 net/core/sock.c:3204 mptcp_wait_data net/mptcp/protocol.c:1770 [inline] mptcp_recvmsg+0xfd1/0x27b0 net/mptcp/protocol.c:2080 inet6_recvmsg+0x11b/0x5e0 net/ipv6/af_inet6.c:659 sock_recvmsg_nosec net/socket.c:944 [inline] ____sys_recvmsg+0x527/0x600 net/socket.c:2626 ___sys_recvmsg+0x127/0x200 net/socket.c:2670 do_recvmmsg+0x24d/0x6d0 net/socket.c:2764 __sys_recvmmsg net/socket.c:2843 [inline] __do_sys_recvmmsg net/socket.c:2866 [inline] __se_sys_recvmmsg net/socket.c:2859 [inline] __x64_sys_recvmmsg+0x20b/0x260 net/socket.c:2859 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fc200d2dc39 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc5758e5a8 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc200d2dc39 RDX: 0000000000000002 RSI: 00000000200017c0 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000f0b5ff R10: 0000000000000100 R11: 0000000000000246 R12: 0000000000000003 R13: 00007ffc5758e5d0 R14: 00007ffc5758e5c0 R15: 0000000000000003 Fix the issue by replacing the MPTCP_DATA_READY bit with direct inspection of the msk receive queue. Reported-and-tested-by: syzbot+3360da629681aa0d22fe@syzkaller.appspotmail.com Fixes: 7a6a6cbc3e59 ("mptcp: recvmsg() can drain data from multiple subflow") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-08asm-generic/io.h: give stub iounmap() on !MMU same prototype as elsewhereAdam Borowski
It made -Werror sad. Signed-off-by: Adam Borowski <kilobyte@angband.pl> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-08ASoC: SOF: prepare code to allocate IPC messages in fw_readyRander Wang
The fixed maximum size of IPC message does not allow for large transfers, e.g. for filter data. Currently such messages will be divided into smaller pieces and sent to firmware in multiple chunks. For future IPC, this strategy is not suitable. The maximum IPC message size is limited by host box size which can be known when firmware is ready, so the fw_ready callback can allocate IPC messages with platform-specific sizes instead of the current fixed-size. To be compatible with released firmware, current platforms will still use SOF_IPC_MSG_MAX_SIZE. For future platforms, there will be a new fw_ready function and the platform-specific allocation will take place there. Signed-off-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Message-Id: <20211008093836.28210-1-peter.ujfalusi@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-08ASoC: dt-bindings: mediatek: mt8192: re-add audio afe documentTzung-Bi Shih
The document was merged as commit 1afc60e00de3 ("dt-bindings: mediatek: mt8192: add audio afe document"). However, [1] revealed that the commit 1afc60e00de3 breaks dt_binding_check due to dt-bindings/clock/mt8192-clk.h doesn't exist. As a temporary fix, commit 7d94ca3c8acd ("ASoC: mt8192: revert add audio afe document") reverted commit 1afc60e00de3. dt-bindings/clock/mt8192-clk.h is in mainline per commit f35f1a23e0e1 ("clk: mediatek: Add dt-bindings of MT8192 clocks"). Re-adds the document back. [1]: https://mailman.alsa-project.org/pipermail/alsa-devel/2020-November/176873.html Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Message-Id: <20211008025523.1852319-1-tzungbi@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-08ASoC: Intel: bytcht_es8316: Utilize dev_err_probe() to avoid log saturationAndy Shevchenko
dev_err_probe() avoids printing into log when the deferred probe is invoked. This is possible when clock provider is pending to appear. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Message-Id: <20211007164523.27094-5-andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-08ASoC: Intel: bytcht_es8316: Switch to use gpiod_get_optional()Andy Shevchenko
First of all, replace indexed API by plain one since we have index 0. Second, switch to optional variant and drop duplicated code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Message-Id: <20211007164523.27094-4-andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-08ASoC: Intel: bytcht_es8316: Use temporary variable for struct deviceAndy Shevchenko
Use temporary variable for struct device to make code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Message-Id: <20211007164523.27094-3-andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-08ASoC: Intel: bytcht_es8316: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Message-Id: <20211007164523.27094-2-andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-08ASoC: rt9120: Add rt9210 audio amplifier supportChiYuan Huang
Add Richtek rt9120 audio amplifier support. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> [Fix a Gain->Volume -- broonie] Message-Id: <1633668612-25524-3-git-send-email-u0084500@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-08ASoC: dt-bindings: rt9120: Add initial bindingsChiYuan Huang
Add initial bindings for Richtek rt9120 audio amplifier. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Message-Id: <1633668612-25524-2-git-send-email-u0084500@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-08x86/fpu: Restore the masking out of reserved MXCSR bitsBorislav Petkov
Ser Olmy reported a boot failure: init[1] bad frame in sigreturn frame:(ptrval) ip:b7c9fbe6 sp:bf933310 orax:ffffffff \ in libc-2.33.so[b7bed000+156000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU: 0 PID: 1 Comm: init Tainted: G W 5.14.9 #1 Hardware name: Hewlett-Packard HP PC/HP Board, BIOS JD.00.06 12/06/2001 Call Trace: dump_stack_lvl dump_stack panic do_exit.cold do_group_exit get_signal arch_do_signal_or_restart ? force_sig_info_to_task ? force_sig exit_to_user_mode_prepare syscall_exit_to_user_mode do_int80_syscall_32 entry_INT80_32 on an old 32-bit Intel CPU: vendor_id : GenuineIntel cpu family : 6 model : 6 model name : Celeron (Mendocino) stepping : 5 microcode : 0x3 Ser bisected the problem to the commit in Fixes. tglx suggested reverting the rejection of invalid MXCSR values which this commit introduced and replacing it with what the old code did - simply masking them out to zero. Further debugging confirmed his suggestion: fpu->state.fxsave.mxcsr: 0xb7be13b4, mxcsr_feature_mask: 0xffbf WARNING: CPU: 0 PID: 1 at arch/x86/kernel/fpu/signal.c:384 __fpu_restore_sig+0x51f/0x540 so restore the original behavior only for 32-bit kernels where you have ancient machines with buggy hardware. For 32-bit programs on 64-bit kernels, user space which supplies wrong MXCSR values is considered malicious so fail the sigframe restoration there. Fixes: 6f9866a166cd ("x86/fpu/signal: Let xrstor handle the features to init") Reported-by: Ser Olmy <ser.olmy@protonmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Ser Olmy <ser.olmy@protonmail.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/YVtA67jImg3KlBTw@zn.tnic
2021-10-08Merge tag 'amd-drm-fixes-5.15-2021-10-06' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.15-2021-10-06: amdgpu: - DCN 3.1 DP alt mode fixes - S0ix gfxoff fix - Fix DRM_AMD_DC_SI dependencies - PCIe DPC handling fix - DCN 3.1 scaling fix - Documentation fix amdkfd: - Fix potential memory leak - IOMMUv2 init fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211006203828.4818-1-alexander.deucher@amd.com
2021-10-08Merge tag 'drm-misc-fixes-2021-10-06' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Rebased drm-misc-fixes for v5.15-rc5: - Dropped vc4 patches. - Compiler fix for vc4. - Cursor fix for nouveau. - Fix ttm buffer moves for ampere gpu's by adding minimal acceleration support. - Small rockchip fixes. - Fix DT bindings indent for ili9341. - Fix y030xx067a init sequence to not get a yellow tint. - Kconfig fix for fb_simple vs simpledrm. - Assorted nouvaeu memory leaks. - Fix gbefb when built with COMPILE_TEST. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3272bf72-2c37-31eb-404e-cf7edd485c7d@linux.intel.com
2021-10-08Merge tag 'drm-intel-fixes-2021-10-07' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.15-rc5: - Fix RKL HDMI audio - Fix runtime pm imbalance on i915_gem_shrink() error path - Fix Type-C port access before hw/sw state sync - Fix VBT backlight struct version/size check - Fix VT-d async flip on SKL/BXT with plane stretch workaround Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87k0ipywo4.fsf@intel.com
2021-10-07checksyscalls: Unconditionally ignore fstat{,at}64Palmer Dabbelt
These can be replaced by statx(). Since rv32 has a 64-bit time_t we just never ended up with them in the first place. This is now an error due to -Werror. Suggested-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-10-07Merge series "Add reset-gpios handling for max98927" from Alejandro Tafalla ↵Mark Brown
<atafalla@dnyon.com>: The max98927 codec on some devices (i.e. Xiaomi Mi A2 Lite phone) requires hardware-resetting the codec by driving a reset-gpio. This series adds support for it through an optional reset-gpios property. v4: * Correctly assert/deassert the GPIO states * Wait for the i2c port to be ready after reset * Reset device when removed v3: * Fix indentation on the dev_err_probe line v2: * Use dev_err_probe instead of dev_err Alejandro Tafalla (2): ASoC: max98927: Handle reset gpio when probing i2c dt-bindings: sound: max98927: Add reset-gpios optional property .../devicetree/bindings/sound/max9892x.txt | 3 +++ sound/soc/codecs/max98927.c | 25 +++++++++++++++++++ sound/soc/codecs/max98927.h | 1 + 3 files changed, 29 insertions(+) -- 2.33.0
2021-10-07Merge series "Introduce new SOF helpers" from Daniel Baluta ↵Mark Brown
<daniel.baluta@oss.nxp.com> Daniel Baluta <daniel.baluta@nxp.com>: From: Daniel Baluta <daniel.baluta@nxp.com> This patchseries adds new helpers in order to reduce code duplication and prepare for compress audio support with SOF. Bud Liviu-Alexandru (1): ASoC: SOF: Make Intel IPC stream ops generic Daniel Baluta (3): ASoC: SOF: Introduce snd_sof_mailbox_read / snd_sof_mailbox_write callbacks ASoC: SOF: imx: Use newly introduced generic IPC stream ops ASoC: SOF: Introduce fragment elapsed notification API sound/soc/sof/Kconfig | 4 ++ sound/soc/sof/Makefile | 3 +- sound/soc/sof/compress.c | 51 +++++++++++++++++++ sound/soc/sof/imx/Kconfig | 2 + sound/soc/sof/imx/imx8.c | 39 +++++++------- sound/soc/sof/imx/imx8m.c | 26 ++++------ sound/soc/sof/intel/Makefile | 3 -- sound/soc/sof/intel/apl.c | 4 ++ sound/soc/sof/intel/bdw.c | 12 +++-- sound/soc/sof/intel/byt.c | 24 ++++++--- sound/soc/sof/intel/cnl.c | 4 ++ sound/soc/sof/intel/icl.c | 4 ++ sound/soc/sof/intel/pci-tng.c | 12 +++-- sound/soc/sof/intel/tgl.c | 4 ++ sound/soc/sof/ipc.c | 6 ++- sound/soc/sof/ops.h | 15 ++++++ sound/soc/sof/pcm.c | 7 ++- sound/soc/sof/sof-audio.h | 11 +++- sound/soc/sof/sof-priv.h | 28 ++++++---- .../sof/{intel/intel-ipc.c => stream-ipc.c} | 50 +++++++++--------- sound/soc/sof/topology.c | 6 ++- 21 files changed, 218 insertions(+), 97 deletions(-) create mode 100644 sound/soc/sof/compress.c rename sound/soc/sof/{intel/intel-ipc.c => stream-ipc.c} (58%) -- 2.27.0
2021-10-07Merge series "ASoC: SOF: Improvements for debugging" from Peter Ujfalusi ↵Mark Brown
<peter.ujfalusi@linux.intel.com>: Hi, The aim of this series is to clean up, make it easier to interpret and less 'chatty' prints aimed for debugging errors. For example currently the DSP/IPC dump is printed every time we have an IPC timeout and it is posible to lost the first and more indicative dump to find the rootcause. Regards, Peter --- Peter Ujfalusi (18): ASoC: SOF: debug: Swap the dsp_dump and ipc_dump sequence for fw_exception ASoC: SOF: ipc and dsp dump: Add markers for better visibility ASoC: SOF: Print the dbg_dump and ipc_dump once to reduce kernel log noise ASoC: SOF: loader: Print the DSP dump if boot fails ASoC: SOF: intel: atom: No need to do a DSP dump in atom_run() ASoC: SOF: debug/ops: Move the IPC and DSP dump functions out from the header ASoC: SOF: debug: Add SOF_DBG_DUMP_OPTIONAL flag for DSP dumping ASoC: SOF: intel: hda-loader: Use snd_sof_dsp_dbg_dump() for DSP dump ASoC: SOF: Drop SOF_DBG_DUMP_FORCE_ERR_LEVEL and sof_dev_dbg_or_err ASoC: SOF: debug: Print out the fw_state along with the DSP dump ASoC: SOF: ipc: Re-enable dumps after successful IPC tx ASoC: SOF: ops: Force DSP panic dumps to be printed ASoC: SOF: Introduce macro to set the firmware state ASoC: SOF: intel: hda: Drop 'error' prefix from error dump functions ASoC: SOF: core: Clean up snd_sof_get_status() prints ASoC: SOF: loader: Drop SOF_DBG_DUMP_REGS flag when firmware start fails ASoC: SOF: Intel: hda-loader: Drop SOF_DBG_DUMP_REGS flag from dbg_dump calls ASoC: SOF: Intel: hda: Dump registers and stack when SOF_DBG_DUMP_REGS is set Pierre-Louis Bossart (1): ASoC: SOF: core: debug: force all processing on primary core sound/soc/sof/core.c | 24 ++++++------- sound/soc/sof/debug.c | 61 ++++++++++++++++++++++++++++++-- sound/soc/sof/intel/atom.c | 5 +-- sound/soc/sof/intel/hda-loader.c | 11 +++--- sound/soc/sof/intel/hda.c | 16 +++------ sound/soc/sof/ipc.c | 10 ++++-- sound/soc/sof/loader.c | 11 ++++-- sound/soc/sof/ops.c | 3 ++ sound/soc/sof/ops.h | 12 +------ sound/soc/sof/pm.c | 6 ++-- sound/soc/sof/sof-priv.h | 31 ++++++++++------ sound/soc/sof/topology.c | 6 ++++ 12 files changed, 131 insertions(+), 65 deletions(-) -- 2.33.0
2021-10-07Merge series "Rockchip I2S/TDM controller" from Nicolas Frattaroli ↵Mark Brown
<frattaroli.nicolas@gmail.com>: Hello, this is version 5 of the I2S/TDM driver patchset. A big thanks to everyone who has provided their valuable feedback so far. Changes in v5: driver: - change comment style of the first comment to C++ style - make refcount non-atomic, as it's only ever used inside a spinlock - use newer SND_SOC_DAIFMT_CB* defines - change ternary statements to if/else conditions - make _clk_compensation_put return 1 if clock changed - implement set_bclk_ratio callback - always set half frame sync mode in TDM mode - automatically enable mclk-calibrate mode when the clocks for it are specified in the device tree bindings: - add Reviewed-by: Rob Herring - drop rockchip,frame-width property (done by set_bclk_ratio) - drop rockchip,fsync-half-frame property - drop rockchip,mclk-calibrate property dts: - drop empty codec block from Quartz64 device tree Changes in v4: driver: - factor TDE/RDE enable/disable into their own inlined functions - add an RDE disable in a location where it looks like it was forgotten (rxctrl else), judging by corresponding TDE code - remove parentheses around CLK_PPM_MIN/MAX values - wording + titlecasing in the clock compensation control - use if statement in precious_reg instead - refactor rockchip_i2s_io_multiplex to have the switch statements in a function call to make the function less unwieldy - get rid of IS_ERR checks around clk enable/disable calls where already checked before by the probe - reworded some error message strings - fix potential deadlock in txrxctrl found by Sugar Zhang using spin_lock_irqsave - fix potential deadlock in trcm_mode found by Sugar Zhang using spin_lock_irqsave - use devm_platform_get_and_ioremap_resource in probe - only set DMA things if controller has capture/playback ability. Did not move this into init_dai because I'd then need to pass in the res and probe it earlier in the function, and it's also used elsewhere in the probe function - use _get_optional_exclusive for reset controls, as some controllers only have capture or playback capability bindings: - remove status = "okay" since that's the default - change the path configs to be an enum - rename "foo" to "bus" - make resets optional as controller may lack either playback or capture capability, and therefore also doesn't have a reset. At least one reset is still required, because a controller with no playback and no capture is not very useful Changes in v3: driver: - alphabetically sort includes - check pm_runtime_get_sync return value, act on it - remove unnecessary initialisers in set_fmt - use udelay(15) in retry code: 10 retries * 15 = 150, so at worst we wait the full i2s register access delay - fix some weird returns to return directly - use __maybe_unused instead of #ifdef CONFIG_PM_SLEEP, also put __maybe_unused on the runtime callbacks - use (foo) instead of foo in header macros for precedence reasons - when using mclk-calibrate, also turn off/on those clocks during suspend and resume operations - remove mclk_tx and mclk_rx reenablement code in remove - move hclk enablement further down the probe, and disable it on probe failure - make reset controls mandatory, since the bindings state this too - use _exclusive for getting the reset controls - change reset assert/deassert delays to both be 10 usec (thank you Sugar Zhang!) - properly prepare and enable all mclks in probe, especially before calling clk_get_rate on them - if registering PCM fails, also use the cleanup error path instead of returning directly - bring back playback and capture only but in the way Sugar Zhang suggested it: set those modes depending on dma-names - rework clock enablement in general. Probe now always enables these, instead of relying on the pm resume thing - add myself to MAINTAINERS for this driver dt bindings: - fix a description still mentioning clk-trcm in the schema - document rockchip,io-multiplex, a property that describes the hardware as having multiplexed I2S GPIOs so direction needs to be changed dynamically - document rockchip,mclk-calibrate, which allows specifying different clocks for the two sample rate bases and switch between them as needed - dma-names now doesn't have a set order and items can be absent to indicate that the controller doesn't support this mode - add myself to MAINTAINERS for these bindings Changes in v2: - remove ad-hoc writeq and needless (and broken) optimisation in reset assert/deassert. This wouldn't have worked on Big Endian, and would've been pointless on any other platform, as the overhead for saving one write was comparatively big - fix various checkpatch issues - get rid of leftover clk-trcm in schema - set status = "okay" in example in schema instead of "disabled" - change dma-names so rx is first, adjust device trees as necessary - properly reference uint32-array for rx-route and tx-route instead of uint32 - replace trcm-sync with two boolean properties, adjust DT changes accordingly and also get rid of the header file - get rid of rockchip,no-dmaengine. This was only needed for some downstream driver and shouldn't be in the DT - get rid of rockchip,capture-only/playback-only. Rationale being that I have no way to test whether they're needed, and unconditionally setting channels_min to 0 breaks everything - change hclk description in "clocks" Nicolas Frattaroli (4): ASoC: rockchip: add support for i2s-tdm controller ASoC: dt-bindings: rockchip: add i2s-tdm bindings arm64: dts: rockchip: add i2s1 on rk356x arm64: dts: rockchip: add analog audio on Quartz64 .../bindings/sound/rockchip,i2s-tdm.yaml | 198 ++ MAINTAINERS | 7 + .../boot/dts/rockchip/rk3566-quartz64-a.dts | 31 +- arch/arm64/boot/dts/rockchip/rk356x.dtsi | 26 + sound/soc/rockchip/Kconfig | 11 + sound/soc/rockchip/Makefile | 2 + sound/soc/rockchip/rockchip_i2s_tdm.c | 1848 +++++++++++++++++ sound/soc/rockchip/rockchip_i2s_tdm.h | 398 ++++ 8 files changed, 2520 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml create mode 100644 sound/soc/rockchip/rockchip_i2s_tdm.c create mode 100644 sound/soc/rockchip/rockchip_i2s_tdm.h -- 2.33.0
generated by cgit (git 2.34.1) at 2025-09-23 16:06:07 +0000