| Age | Commit message (Collapse) | Author |
|---|
|
While some assemblers (including the LLVM assembler I mostly use) will
happily accept SMSTART as an instruction by default others, specifically
gas, require that any architecture extensions be explicitly enabled.
The assembler SME test programs use manually encoded helpers for the new
instructions but no SMSTART helper is defined, only SM and ZA specific
variants. Unfortunately the irritators that were just added use plain
SMSTART so on stricter assemblers these fail to build:
za-test.S:160: Error: selected processor does not support `smstart'
Switch to using SMSTART ZA via the manually encoded smstart_za macro we
already have defined.
Fixes: d65f27d240bb ("kselftest/arm64: Implement irritators for ZA and ZT")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241108-arm64-selftest-asm-error-v1-1-7ce27b42a677@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
RTC lives on the chip's base register page. Add the relevant register
definitions and implement a basic set/read time functionality. Tested
with the samsung,coreprimevelte smartphone which contains this PMIC and
whose vendor kernel tree has also served as the sole reference for this.
Signed-off-by: Karel Balej <balejk@matfyz.cz>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20241012193345.18594-2-balejk@matfyz.cz
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Linu Cherian says:
====================
Knobs for NPC default rule counters
Patch 1 introduce _rvu_mcam_remove/add_counter_from/to_rule
by refactoring existing code
Patch 2 adds a devlink param to enable/disable counters for default
rules. Once enabled, counters can
Patch 3 adds documentation for devlink params
v4: https://lore.kernel.org/20241029035739.1981839-1-lcherian@marvell.com
====================
Link: https://patch.msgid.link/20241105125620.2114301-1-lcherian@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add documentation for the following devlink params
- npc_mcam_high_zone_percent
- npc_def_rule_cntr
- nix_maxlf
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Link: https://patch.msgid.link/20241105125620.2114301-4-lcherian@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add devlink knobs to enable/disable counters on NPC
default rule entries.
Sample command to enable default rule counters:
devlink dev param set <dev> name npc_def_rule_cntr value true cmode runtime
Sample command to read the counter:
cat /sys/kernel/debug/cn10k/npc/mcam_rules
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Link: https://patch.msgid.link/20241105125620.2114301-3-lcherian@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce lowlevel variant of rvu_mcam_remove/add_counter_from/to_rule
for better code reuse, which assumes necessary locks are taken at
higher level.
These low level functions would be used for implementing default rule
counter APIs in the subsequent patch.
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241105125620.2114301-2-lcherian@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The logic of eq_update_ci() is duplicated in mlx5_eq_update_ci(). The
only additional work done by mlx5_eq_update_ci() is to increment
eq->cons_index. Call eq_update_ci() from mlx5_eq_update_ci() to avoid
the duplication.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241107183054.2443218-2-csander@purestorage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The memory barrier in eq_update_ci() after the doorbell write is a
significant hot spot in mlx5_eq_comp_int(). Under heavy TCP load, we see
3% of CPU time spent on the mfence instruction.
98df6d5b877c ("net/mlx5: A write memory barrier is sufficient in EQ ci
update") already relaxed the full memory barrier to just a write barrier
in mlx5_eq_update_ci(), which duplicates eq_update_ci(). So replace mb()
with wmb() in eq_update_ci() too.
On strongly ordered architectures, no barrier is actually needed because
the MMIO writes to the doorbell register are guaranteed to appear to the
device in the order they were made. However, the kernel's ordered MMIO
primitive writel() lacks a convenient big-endian interface.
Therefore, we opt to stick with __raw_writel() + a barrier.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241107183054.2443218-1-csander@purestorage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'macsec-inherit-lower-device-s-features-and-tso-limits-when-offloading'
Sabrina Dubroca says:
====================
macsec: inherit lower device's features and TSO limits when offloading
When macsec is offloaded to a NIC, we can take advantage of some of
its features, mainly TSO and checksumming. This increases performance
significantly. Some features cannot be inherited, because they require
additional ops that aren't provided by the macsec netdevice.
We also need to inherit TSO limits from the lower device, like
VLAN/macvlan devices do.
This series also moves the existing macsec offload selftest to the
netdevsim selftests before adding tests for the new features. To allow
this new selftest to work, netdevsim's hw_features are expanded.
====================
Link: https://patch.msgid.link/cover.1730929545.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The test verifies that available features aren't changed by toggling
offload on the device. Creating a device with offload off and then
enabling it later should result in the same features as creating the
device with offload enabled directly.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/ba801bd0a75b02de2dddbfc77f9efceb8b3d8a2e.1730929545.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The test verifies that toggling offload works (both via rtnetlink and
macsec's genetlink APIs). This is only possible when no SA is
configured.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/bf8e27ee0d921caa4eb35f1e830eca6d4080ddb2.1730929545.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're going to expand this test, and macsec offload is only lightly
related to rtnetlink.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/a1f92c250cc129b4bb111a206c4b560bab4e24a5.1730929545.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If macsec is offloaded, we need to follow the lower device's
capabilities, like VLAN devices do.
Leave the limits unchanged when the offload is disabled.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/8240c0181e851f169d815f59658a01fb9dfc5073.1730929545.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For all events, we need to loop over the list of secys, so let's move
the common variables out of the switch/case.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/9b8996af518fbeb3b7d527feb15d5788495e3108.1730929545.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This commit extends the set of netdevice features supported by macsec
devices when offload is enabled, which increases performance
significantly (for a single TCP stream: 17.5Gbps to 38.5Gbps on my
test machines).
Commit c850240b6c41 ("net: macsec: report real_dev features when HW
offloading is enabled") previously attempted something similar, but
had to be reverted (commit 8bcd560ae878 ("Revert "net: macsec: report
real_dev features when HW offloading is enabled"")) because the set of
features it exposed was too large.
During initialization, all features are set, and they're then removed
via ndo_fix_features (macsec_fix_features). This allows the
offloadable features to be automatically enabled if offloading is
turned on after device creation.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/8b32c3011d269d6f149724e80c1ffe67c9534067.1730929545.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test checking that some features are active by default and
changeable.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/fff58fa70f8a300440958b5020f6a4eb2e9dad61.1730929545.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netdevsim currently only set HW_TC in its hw_features, but other
features should also be present to better reflect the behavior of real
HW.
In my macsec offload testing, this ends up as HW_CSUM being missing
from hw_features, so it doesn't stick in wanted_features when offload
is turned off. Then HW_CSUM (and thus TSO, thanks to
netdev_fix_features) is not automatically turned back on when offload
is re-enabled.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/b918dc4dd76410a57f7516a855f66b0a2bd58326.1730929545.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the __rtc_read_time call fails,, the struct rtc_time tm; may contain
uninitialized data, or an illegal date/time read from the RTC hardware.
When calling rtc_tm_to_ktime later, the result may be a very large value
(possibly KTIME_MAX). If there are periodic timers in rtc->timerqueue,
they will continually expire, may causing kernel softlockup.
Fixes: 6610e0893b8b ("RTC: Rework RTC code to use timerqueue for events")
Signed-off-by: Yongliang Gao <leonylgao@tencent.com>
Acked-by: Jingqun Li <jingqunli@tencent.com>
Link: https://lore.kernel.org/r/20241011043153.3788112-1-leonylgao@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- The fair sched class currently has a bug where its balance() returns
true telling the sched core that it has tasks to run but then NULL
from pick_task(). This makes sched core call sched_ext's pick_task()
without preceding balance() which can lead to stalls in partial mode.
For now, work around by detecting the condition and forcing the CPU
to go through another scheduling cycle.
- Add a missing newline to an error message and fix drgn introspection
tool which went out of sync.
* tag 'sched_ext-for-6.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Handle cases where pick_task_scx() is called without preceding balance_scx()
sched_ext: Update scx_show_state.py to match scx_ops_bypass_depth's new type
sched_ext: Add a missing newline at the end of an error message
|
|
PSCI reboot mode will map a mode name to multiple magic values instead
of just one. Convert the mode-.* property to an array. Users of the
reboot-mode schema will need to specify the maxItems of the mode-.*
properties. Existing users will all be 1.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20241107-arm-psci-system_reset2-vendor-reboots-v8-1-e8715fa65cb5@quicinc.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The DT bindings specify the property as 'battery-detect-gpios', add
handling for it. Keep fallback to the deprecated 'bat-detect-gpio' property
to keep compatibility with older DTS.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Link: https://lore.kernel.org/r/ca28b2f2037929c0011fc5c779c332c1d1ad5308.1730720720.git.stano.jakubek@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
While the bindings have always used the correct 'battery-detect-gpios'
property, the DTS and the Linux driver have been using the incorrect
'bat-detect-gpio' property. Document this property and mark it
as deprecated.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Chunyan Zhang <zhang.lyra@gmail.com>
Link: https://lore.kernel.org/r/f334c973dd4e6390a0cd51dbde358277a07604d7.1730720720.git.stano.jakubek@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
After reviewing the code, it was found that these macros are never
referenced in the code. Just remove them.
Signed-off-by: Ba Jing <bajing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20241025090659.33458-1-bajing@cmss.chinamobile.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Change iio_read_channel_processed to iio_read_channel_processed_scale
where appropriate.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20241023184800.109376-3-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Change iio_read_channel_processed to iio_read_channel_processed_scale
where appropriate.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20241023184800.109376-2-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
change my contact in this driver.
Signed-off-by: anish kumar <yesanishhere@gmail.com>
Link: https://lore.kernel.org/r/20241023061126.7896-1-yesanishhere@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Adds driver support for the USB-C model of Apple's Magic Trackpad 2.
The 2024 USB-C model is compatible with the existing Magic Trackpad 2
driver but has a different hardware ID.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219470
Signed-off-by: Callahan Kovacs <callahankovacs@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Switch the i2c_transfer methods to regmap APIs.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Link: https://lore.kernel.org/r/20241010084949.3351182-3-iwamatsu@nigauri.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Sort headers in alphabetical order.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Link: https://lore.kernel.org/r/20241010084949.3351182-2-iwamatsu@nigauri.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The WDT bit in the status register is 5, not 6. This fixes from 6 to 5.
Link: https://abracon.com/Support/AppsManuals/Precisiontiming/AB08XX-Application-Manual.pdf
Link: https://www.microcrystal.com/fileadmin/Media/Products/RTC/App.Manual/RV-1805-C3_App-Manual.pdf
Fixes: 749e36d0a0d7 ("rtc: abx80x: add basic watchdog support")
Cc: Jeremy Gebben <jgebben@sweptlaser.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Link: https://lore.kernel.org/r/20241008041737.1640633-1-iwamatsu@nigauri.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
During running KASAN Kunit tests with CONFIG_KASAN enabled, the following
"warning" is reported by kunit framework:
# kasan_atomics: Test should be marked slow (runtime: 2.604703115s)
It took 2.6 seconds on my PC (Intel(R) Core(TM) i7-7700K CPU @ 4.20GHz),
apparently, due to multiple atomic checks in kasan_atomics_helper().
Let's mark it with KUNIT_CASE_SLOW which reports now as:
# kasan_atomics.speed: slow
Link: https://lkml.kernel.org/r/20241101184011.3369247-3-snovitoll@gmail.com
Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "kasan: few improvements on kunit tests".
This patch series addresses the issue [1] with KASAN symbols used in the
Kunit test, but exported as EXPORT_SYMBOL_GPL.
Also a small tweak of marking kasan_atomics() as KUNIT_CASE_SLOW to avoid
kunit report that the test should be marked as slow.
This patch (of 2):
Replace EXPORT_SYMBOL_GPL with EXPORT_SYMBOL_IF_KUNIT to mark the symbols
as visible only if CONFIG_KUNIT is enabled.
KASAN Kunit test should import the namespace EXPORTED_FOR_KUNIT_TESTING to
use these marked symbols.
Link: https://lkml.kernel.org/r/20241101184011.3369247-1-snovitoll@gmail.com
Link: https://lkml.kernel.org/r/20241101184011.3369247-2-snovitoll@gmail.com
Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Reported-by: Andrey Konovalov <andreyknvl@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218315
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Ever since commit 8d7071af8907 ("mm: always expand the stack with the mmap
write lock held") we have been expanding the stack with the mmap write
lock held.
This is true in all code paths:
get_arg_page()
-> expand_downwards()
setup_arg_pages()
-> expand_stack_locked()
-> expand_downwards() / expand_upwards()
lock_mm_and_find_vma()
-> expand_stack_locked()
-> expand_downwards() / expand_upwards()
create_elf_tables()
-> find_extend_vma_locked()
-> expand_stack_locked()
expand_stack()
-> vma_expand_down()
-> expand_downwards()
expand_stack()
-> vma_expand_up()
-> expand_upwards()
Each of which acquire the mmap write lock before doing so. Despite this,
we maintain code that acquires a page table lock in the expand_upwards()
and expand_downwards() code, stating that we hold a shared mmap lock and
thus this is necessary.
It is not, we do not have to worry about concurrent VMA expansions so we
can simply drop this, and update comments accordingly.
We do not even need be concerned with racing page faults, as
vma_start_write() is invoked in both cases.
Link: https://lkml.kernel.org/r/20241101184627.131391-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Jann Horn <jannh@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Replace strcpy() with strscpy() in mm/huge_memory.c
strcpy() has been deprecated because it is generally unsafe, so help to
eliminate it from the kernel source.
Link: https://github.com/KSPP/linux/issues/88
Link: https://lkml.kernel.org/r/20241101165719.1074234-7-mcanal@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Lance Yang <ioworker0@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add the ``thp_shmem=`` kernel command line to allow specifying the default
policy of each supported shmem hugepage size. The kernel parameter
accepts the following format:
thp_shmem=<size>[KMG],<size>[KMG]:<policy>;<size>[KMG]-<size>[KMG]:<policy>
For example,
thp_shmem=16K-64K:always;128K,512K:inherit;256K:advise;1M-2M:never;4M-8M:within_size
Some GPUs may benefit from using huge pages. Since DRM GEM uses shmem to
allocate anonymous pageable memory, it's essential to control the huge
page allocation policy for the internal shmem mount. This control can be
achieved through the ``transparent_hugepage_shmem=`` parameter.
Beyond just setting the allocation policy, it's crucial to have granular
control over the size of huge pages that can be allocated. The GPU may
support only specific huge page sizes, and allocating pages larger/smaller
than those sizes would be ineffective.
Link: https://lkml.kernel.org/r/20241101165719.1074234-6-mcanal@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In order to implement a kernel parameter similar to ``thp_anon=`` for
shmem, we'll need the function ``get_order_from_str()``.
Instead of duplicating the function, move the function to a shared
header, in which both mm/shmem.c and mm/huge_memory.c will be able to
use it.
Link: https://lkml.kernel.org/r/20241101165719.1074234-5-mcanal@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: add more kernel parameters to control mTHP", v5.
This series introduces four patches related to the kernel parameters
controlling mTHP and a fifth patch replacing `strcpy()` for `strscpy()` in
the file `mm/huge_memory.c`.
The first patch is a straightforward documentation update, correcting the
format of the kernel parameter ``thp_anon=``.
The second, third, and fourth patches focus on controlling THP support for
shmem via the kernel command line. The second patch introduces a
parameter to control the global default huge page allocation policy for
the internal shmem mount. The third patch moves a piece of code to a
shared header to ease the implementation of the fourth patch. Finally,
the fourth patch implements a parameter similar to ``thp_anon=``, but for
shmem.
The goal of these changes is to simplify the configuration of systems that
rely on mTHP support for shmem. For instance, a platform with a GPU that
benefits from huge pages may want to enable huge pages for shmem. Having
these kernel parameters streamlines the configuration process and ensures
consistency across setups.
This patch (of 4):
Add a new kernel command line to control the hugepage allocation policy
for the internal shmem mount, ``transparent_hugepage_shmem``. The
parameter is similar to ``transparent_hugepage`` and has the following
format:
transparent_hugepage_shmem=<policy>
where ``<policy>`` is one of the seven valid policies available for
shmem.
Configuring the default huge page allocation policy for the internal
shmem mount can be beneficial for DRM GPU drivers. Just as CPU
architectures, GPUs can also take advantage of huge pages, but this is
possible only if DRM GEM objects are backed by huge pages.
Since GEM uses shmem to allocate anonymous pageable memory, having control
over the default huge page allocation policy allows for the exploration of
huge pages use on GPUs that rely on GEM objects backed by shmem.
Link: https://lkml.kernel.org/r/20241101165719.1074234-2-mcanal@igalia.com
Link: https://lkml.kernel.org/r/20241101165719.1074234-4-mcanal@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Hugh Dickins <hughd@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: kernel-dev@igalia.com
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The number of slabs can easily exceed the hard coded MAX_SLABS in the
slabinfo tool, causing it to overwrite memory and crash.
Increase the value of MAX_SLABS, and check if that has been exceeded for
each new slab, instead of at the end when it's already too late. Also
move the check for MAX_ALIASES into the loop body.
Link: https://lkml.kernel.org/r/20241031105534.565533-1-marc.c.dionne@gmail.com
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a test to assert that, when storing null to am empty tree or a
single entry tree it will not result into:
* a root node with range [0, ULONG_MAX] set to NULL
* a root node with consecutive slot set to NULL
[akpm@linux-foundation.org: work around build error (mas_root)]
Link: https://lkml.kernel.org/r/20241031231627.14316-6-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, when storing NULL on mas_store_root(), the behavior could be
improved.
Storing NULLs over the entire tree may result in a node being used to
store a single range. Further stores of NULL may cause the node and
tree to be corrupt and cause incorrect behaviour. Fixing the store to
the root null fixes the issue by ensuring that a range of 0 - ULONG_MAX
results in an empty tree.
Users of the tree may experience incorrect values returned if the tree
was expanded to store values, then overwritten by all NULLS, then
continued to store NULLs over the empty area.
For example possible cases are:
* store NULL at any range result a new node
* store NULL at range [m, n] where m > 0 to a single entry tree result
a new node with range [m, n] set to NULL
* store NULL at range [m, n] where m > 0 to an empty tree result
consecutive NULL slot
* it allows for multiple NULL entries by expanding root
to store NULLs to an empty tree
This patch tries to improve in:
* memory efficient by setting to empty tree instead of using a node
* remove the possibility of consecutive NULL slot which will prohibit
extended null in later operation
Link: https://lkml.kernel.org/r/20241031231627.14316-5-richard.weiyang@gmail.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Before calling mas_new_root(), the range has been checked.
Link: https://lkml.kernel.org/r/20241031231627.14316-4-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
No user of the return value now, just remove it.
Link: https://lkml.kernel.org/r/20241031231627.14316-3-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "refine storing null", v5.
When overwriting the whole range with NULL, current behavior is not
correct.
An empty tree is represented by having the tree point to NULL directly.
An empty tree indicates the entire range (0-ULONG_MAX) is NULL.
A store operation into an existing node that causes 0 - ULONG_MAX to be
equal to NULL may not be restored to an empty state - a node is used to
store the single range instead. This is wasteful and different from the
initial setup of the tree.
Once the tree is using a single node to store 0 - ULONG_MAX, problems may
arise when storing more values into a tree with the unexpected state of 0
- ULONG being a single range in a node.
User visible issues may mean a corrupt tree and incorrect storage of
information within the tree. This would be limited to users who create
and then empty a tree by overwriting all values, then try to store more
NULLs into the empty tree.
I cannot come up with an example of any user doing this (users usually
destroy the tree and generally don't keep trying to store NULLs over
NULLs), but patch 4/5 "maple_tree: refine mas_store_root() on storing
NULL" should be backported just in case.
This patch (of 5):
Currently for an empty tree, it would print:
maple_tree(0x7ffcd02c6ee0) flags 1, height 0 root (nil)
0: (nil)
This is a little misleading.
Let's print (empty) for an empty tree.
Link: https://lkml.kernel.org/r/20241031231627.14316-1-richard.weiyang@gmail.com
Link: https://lkml.kernel.org/r/20241031231627.14316-2-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There have been no reported infinite loops in the tree, but checking the
detection of an infinite loop during validation is simple enough. Add the
detection to the validate_mm() function so that error reports are clear
and don't just report stalls.
This does not protect against internal maple tree issues, but it does
detect too many vmas being returned from the tree.
The variance of +10 is to allow for the debugging output to be more useful
for nearly correct counts. In the event of more than 10 over the
map_count, the count will be set to -1 for easier identification of a
potential infinite loop.
Note that the mmap lock is held to ensure a consistent tree state during
the validation process.
[akpm@linux-foundation.org: add comment]
Link: https://lkml.kernel.org/r/20241031193608.1965366-1-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
RISC-V doesn't currently have the behavior of restricting the virtual
address space which virtual_address_range tests check, this will
cause the tests fail. So lets disable the whole test suite for riscv64
for now, not build it and run_vmtests.sh will skip it if it is not present.
Link: https://lkml.kernel.org/r/20241008094141.549248-5-zhangchunyan@iscas.ac.cn
Signed-off-by: Chunyan Zhang <zhangchunyan@iscas.ac.cn>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The function name should be *hint* address, so correct it.
Link: https://lkml.kernel.org/r/20241008094141.549248-4-zhangchunyan@iscas.ac.cn
Signed-off-by: Chunyan Zhang <zhangchunyan@iscas.ac.cn>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If entry does not fulfill current mark_idle() parameters, e.g. cutoff
time, then we should clear its ZRAM_IDLE from previous mark_idle()
invocations.
Consider the following case:
- mark_idle() cutoff time 8h
- mark_idle() cutoff time 4h
- writeback() idle - will writeback entries with cutoff time 8h,
while it should only pick entries with cutoff time 4h
The bug was reported by Shin Kawamura.
Link: https://lkml.kernel.org/r/20241028153629.1479791-3-senozhatsky@chromium.org
Fixes: 755804d16965 ("zram: introduce an aged idle interface")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reported-by: Shin Kawamura <kawasin@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@vger.kernel.org>
|
|
Patch series "zram: IDLE flag handling fixes", v2.
zram can wrongly preserve ZRAM_IDLE flag on its entries which can result
in premature post-processing (writeback and recompression) of such
entries.
This patch (of 2)
Recompression should clear ZRAM_IDLE flag on the entries it has accessed,
because otherwise some entries, specifically those for which recompression
has failed, become immediate candidate entries for another post-processing
(e.g. writeback).
Consider the following case:
- recompression marks entries IDLE every 4 hours and attempts
to recompress them
- some entries are incompressible, so we keep them intact and
hence preserve IDLE flag
- writeback marks entries IDLE every 8 hours and writebacks
IDLE entries, however we have IDLE entries left from
recompression, so writeback prematurely writebacks those
entries.
The bug was reported by Shin Kawamura.
Link: https://lkml.kernel.org/r/20241028153629.1479791-1-senozhatsky@chromium.org
Link: https://lkml.kernel.org/r/20241028153629.1479791-2-senozhatsky@chromium.org
Fixes: 84b33bf78889 ("zram: introduce recompress sysfs knob")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reported-by: Shin Kawamura <kawasin@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@vger.kernel.org>
|
|
Instead of calculating the number of full days since Sunday with
(days + 4) % 7, read (and write) that to the RTC Day-of-week Time
Counter register (RTC_TC_DOW).
Some transformation (addition and subtraction for set/get) is
still done, as this register's range is [1..7], while the tm_wday
in struct tm's range is [0..6].
Please note that this was added only to set_time() and read_time()
callbacks because set_alarm() and read_alarm() are setting a bit
in RTC_AL_MASK to ignore DOW for RTC HW alarms for unknown reasons.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240923100010.97470-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add the RTC hardware range parameters to enable the possibility
of using the `start-year` devicetree property which, if present,
will set the start_secs parameter by overriding the defaults
that this driver is setting;
To keep compatibility with (hence have the same date/time reading
as) the old behavior, set:
- range_min to 1900-01-01 00:00:00
- range_max to 2027-12-31 23:59:59 (HW year max range is 0-127)
- start_secs defaulting to 1968-01-02 00:00:00
Please note that the oddness of starting from January 2nd is not
a hardware quirk and it's done only to get the same date/time
reading as an RTC which time was set before this commit.
Also remove the RTC_MIN_YEAR_OFFSET addition and subtraction in
callbacks set_time() and read_time() respectively, as now this
is already done by the API.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20240923100010.97470-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
