summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-04-24netlink: Rename netlink_capable netlink_allowedEric W. Biederman
netlink_capable is a static internal function in af_netlink.c and we have better uses for the name netlink_capable. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-24gianfar: Check if phydev present on ethtool -AClaudiu Manoil
This fixes a seg fault on 'ethtool -A' entry if the interface is down. Obviously we need to have the phy device initialized / "connected" (see of_phy_connect()) to be able to advertise pause frame capabilities. Fixes: 23402bddf9e56eecb27bbd1e5467b3b79b3dbe58 Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-24ASoC: sgtl5000: Use devm_regulator_bulk_get()Fabio Estevam
Using devm_regulator_bulk_get() can make the code cleaner and smaller as we do not need to call regulator_bulk_free() in the error and remove paths. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-24Merge branch 'qlcnic-net'David S. Miller
Shahed Shaikh says: ==================== qlcnic: Bug fixes This patch series contains following fixes - * Fix memory leak caused because of issuing mailbox command which can not wait for its completion. * Reset firmware API lock which might be in inconsistent state. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-24qlcnic: Fix memory leak.Rajesh Borundia
o In case QLC_83XX_MBX_CMD_NO_WAIT command type the calling function does not free the memory as it does not wait for response. So free it when get a response from adapter after sending the command. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-24qlcnic: Reset firmware API lock at driver load timeSony Chacko
Some firmware versions fails to reset the lock during initialization. Force reset firmware API lock during driver probe to ensure lock availability. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-24ACPI / notify: Do not block unknown type notifications in root handlerRafael J. Wysocki
Commit 1a699476e258 "ACPI / hotplug / PCI: Hotplug notifications from acpi_bus_notify()" changed the root notify handler, acpi_bus_notify(), to block unknown type norifications, but it overlooked the fact that they might be propagated to drivers via the ->notify() callback. Fix the problem by allowing drivers to receive unknown type notifications via ->notify() as before. Fixes: 1a699476e258 (ACPI / hotplug / PCI: Hotplug notifications from acpi_bus_notify()) Reported-and-tested-by: Mantas Mikulėnas <grawity@gmail.com> Reported-and-tested-by: Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-24team: forbid incorrect fall-through in notifierJiri Pirko
There are two breaks missing there. The result is that userspace receives multiple messages which might be confusing. Introduced-by: 3d249d4c "net: introduce ethernet teaming device" Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-24net: cadence: Fix architecture dependenciesJean Delvare
I was told that the Cadence macb driver is also useful on Microblaze. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Michal Simek <monstr@monstr.eu> Cc: Mark Brown <broonie@kernel.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-24smc91x: improve definition of debug macrosZi Shen Lim
Redefine some macros that were conditioned upon SMC_DEBUG level. By allowing compiler to verify parameters used by these macros unconditionally, we can flag compilation failures. Compiler will still optimize out the unused code path depending on SMC_DEBUG, so this is a net gain. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Zi Shen Lim <zlim.lnx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-24Merge branch 'fixes_for_v3.15' of ↵Linus Torvalds
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull dma-mapping fix from Marek Szyprowski: "A small fix for dma-mapping subsystem for ARM" * 'fixes_for_v3.15' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: arm: dma-mapping: Fix mapping size value
2014-04-24Merge branch 'for-3.15-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "Dan updated tag allocation to accomodate devices which choke when tags jump back and forth. Quite a few ahci MSI related fixes. A couple config dependency fixes and other misc fixes" * 'for-3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata/ahci: accommodate tag ordered controllers ahci: Do not receive interrupts sent by dummy ports ahci: Use pci_enable_msi_exact() instead of pci_enable_msi_range() ahci: Ensure "MSI Revert to Single Message" mode is not enforced ahci: do not request irq for dummy port pata_samsung_cf: fix ata_host_activate() failure handling pata_arasan_cf: fix ata_host_activate() failure handling ata: fix i.MX AHCI driver dependencies pata_at91: fix ata_host_activate() failure handling libata: Update queued trim blacklist for M5x0 drives libata: make AHCI_XGENE depend on PHY_XGENE
2014-04-24ARM: vexpress/TC2: Convert OPP voltage to uV before storingPunit Agrawal
The SPC stores voltage in mV while the code assumes it was returning uV. Convert the returned voltage to uV before storing. Also fix the comment depicting voltage to uV. Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2014-04-24power/reset: vexpress: Fix restart/power off operationPawel Moll
The restart/power off implementation in the vexpress driver used to obtain the config function when necessary. This was wrong in two respects: 1. It required memory allocation with disabled interrupts (it worked, but lockdep - when enabled - reported warnings). 2. Used jiffies-based timeout, while jiffies are not running at this stage of system shutdown (therefore a config transaction error - if happened - would have never be reported). Fixed by pre-allocating the config function per device and using mdelay for timeout. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2014-04-24of: selftest: add deferred probe interrupt testRob Herring
Signed-off-by: Rob Herring <robh@kernel.org> [grant.likely: fixed failure when root node specifies the interrupt parent] Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-04-24usb: phy: fsm: change "|" to "||" for condition OTG_STATE_A_WAIT_BCON at ↵Peter Chen
statemachine We should be using logical "or" not bitwise "or". Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-24usb: phy: fsm: update OTG HNP state transitionLi Jun
According to:"On-The-Go and Embedded Host Supplement to the USB Revision 2.0 Specification July 27, 2012 Revision 2.0 version 1.1a" - add a_wait_vrise to a_wait_vfall - update condition from a_wait_vrise to a_wait_bcon Signed-off-by: Li Jun <b47624@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-24dt: tegra: remove non-existent clock IDsStephen Warren
The Tegra124 clock DT binding currently provides 3 clocks that don't actually exist; 2 for NAND and one for UART5/UARTE. Delete these. While this is technically an incompatible DT ABI change, nothing could have used these clock IDs for anything practical, since the HW doesn't exist. Cc: <stable@vger.kernel.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-24clk: tegra: remove non-existent clocksStephen Warren
The Tegra124 clock driver currently provides 3 clocks that don't actually exist; 2 for NAND and one for UART5/UARTE. Delete these. Cc: <stable@vger.kernel.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-24ARM: tegra: remove UART5/UARTE from tegra124.dtsiStephen Warren
Tegra124 only has 4 UARTs. Parts of the documentation hint at a fifth UART, but this appears to be left-over from earlier SoC documentation. Remove the non-existent DT node for UART5. Cc: <stable@vger.kernel.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-24Merge tag 'omap-for-v3.15/fixes-v2-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omaps, mostly to fix some GPMC, DSS and USB issues for device tree based booting. And turns out BeagleBoard xM A/B needs it's own minimal dts in addition to the related u-boot changes. Also few minor documentation and typo fixes are merged to get them out of the way. * tag 'omap-for-v3.15/fixes-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix GPMC remap for devices using an offset ARM: OMAP2+: Fix oops for GPMC free ARM: dts: Add support for the BeagleBoard xM A/B ARM: dts: Grammar /that will/it will/ ARM: dts: Grammar /is uses/ is used/ ARM: OMAP2+: Fix config name for USB3 PHY ARM: dts: am335x: update USB DT references ARM: dts: OMAP2+: remove uses of obsolete gpmc,device-nand ARM: AM335X: EVM: fix pinmux documentation in devicetree ARM: OMAP2+: N900: remove omapdss init for DT boot ARM: dts: dra7xx-clocks: Correct mcasp2_ahclkx_mux bit-shift ARM: dts: omap5: Add clocks to USB3 PHY node ARM: OMAP2+: hwmod: fix missing braces in _init() ARM: AM43xx: fix dpll init in bypass mode ARM: OMAP3: hwmod data: Correct clock domains for USB modules ARM: OMAP3: PM: remove access to PRM_VOLTCTRL register Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-24Merge tag 'ux500-defconfig-for-arm-soc' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into fixes This is a patch set for some ST-Ericsson devices: - Updates the Ux500 (U8500) defconfig - Selects PARTITION_ADVANCED for Ux500 and U300 - Configure in IIO sensor drivers for the Ux500 - Configure in the CW1200 WLAN chip for the Ux500 * tag 'ux500-defconfig-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: ux500: configure for CW1200 WLAN chip ARM: ux500: configure in sensors ARM: u300: u300_defconfig: Enable PARTITION_ADVANCED ARM: ux500: u8500_defconfig: Enable PARTITION_ADVANCED ARM: ux500: update defconfig Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-24Merge tag 'renesas-fixes-for-v3.15' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Renesas ARM Based SoC Fixes Updates for v3.15 r8a7791 (R-Car M2) based koelsch board * Correct renesas,gpios to renesas,groups in sd[012] pfc 8a7790 (R-Car H2) based lager board * Correct SND_SOC_DAIFMT_CBx_CFx flags r8a7740 (R-Mobile A1) SoC * Drop address cells from GIC node r8a7740 (R-Mobile A1) based Armadillo800 EVA board * Correct SND_SOC_DAIFMT_CBx_CFx flags sh73a0 (SH-Mobile AG5) SoC * Drop address cells from GIC node * tag 'renesas-fixes-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: koelsch: correct renesas,gpios to renesas,groups in sd[012] pfc ARM: shmobile: r8a7740: drop address cells from GIC node ARM: shmobile: sh73a0: drop address cells from GIC node ARM: shmobile: armadillo800eva: fixup SND_SOC_DAIFMT_CBx_CFx flags ARM: shmobile: lager: fixup SND_SOC_DAIFMT_CBx_CFx flags Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-24Merge tag 'renesas-dt5-for-v3.15' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Fifth Round of Renesas ARM Based SoC DT Updates for v3.15 Correct renesas,groups in SDHI nodes of for r8a7790 (R-Car H2) based Lager board. * tag 'renesas-dt5-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: lager: correct renesas,gpios to renesas,groups in sd[02] pfc Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-24Merge tag 'v3.15-rockchip-fixes1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes Fixing uart-rx pull settings and a copy'n'paste error in a smp message * tag 'v3.15-rockchip-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: rockchip: fix copy'n'paste error in smp error messages ARM: rockchip: rk3188: enable pull-ups on UART RX pins Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-24Merge tag 'imx-fixes-3.15' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes The i.MX fixes for 3.15: - A couple of dts changes for the fallout of imx-drm binding update - Parent DI clocks to video PLL for better HDMI support - PCIe interrupt mapping and GIC node fixes - A series of edmqmx6 board fixes - Other small and random fixes on imx5 and imx6 dts * tag 'imx-fixes-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: i.MX6: ipu_di_sel clocks can set parent rates ARM: imx6q: clk: Parent DI clocks to video PLL via di_pre_sel ARM: dts: imx: add required #clock-cells for fixed-clock ARM: dts: vybrid: drop address and size cells from GIC node ARM: dts: imx6sl-evk: Add an entry for MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11 ARM: dts: imx53: fix apparent copy/paste error ARM: dts: imx6q-gw5xxx: remove dead 'crtcs' property ARM: dts: imx53-tx53: add IPU DI ports and endpoints ARM: dts: imx6: edmqmx6: add second STMPE ARM: dts: imx6: edmqmx6: USB H1 only supports host mode ARM: dts: imx6: edmqmx6: Do not use the OTG switch as VBUS regulator ARM: dts: imx6: edmqmx6: Fix usbotg id pin ARM: dt: microsom: don't set bit 7 for ethernet mux settings ARM: imx6q-clk: parent lvds_gate from lvds_sel ARM: dts: imx: drop invalid size and address cells properties ARM: dts: mx5: fix wrong stmpe-ts bindings ARM: dts: imx53-m53evk: Fix memory region description ARM: dts: imx53-qsb-common: Fix memory region description ARM: dts: imx6: add PCIe interrupt mapping properties Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-24Merge tag 'mvebu-dt-fixes-non-crit-3.15' of ↵Arnd Bergmann
git://git.infradead.org/linux-mvebu into fixes mvebu DT fixes-non-critical (for v3.15-rc1) - kirkwood - add some missing vendor prefixes to keep checkpatch happy - mvebu - add clock ref to mdio node on 370/XP/38x * tag 'mvebu-dt-fixes-non-crit-3.15' of git://git.infradead.org/linux-mvebu: ARM: mvebu: ensure the mdio node has a clock reference on Armada 38x ARM: mvebu: ensure the mdio node has a clock reference on Armada 370/XP ARM: Kirkwood: DT: Add missing vendor prefix ARM: Kirkwood: Fix Atmel vendor prefix Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-24ARM: tegra: remove TEGRA_EMC_SCALING_ENABLEPaul Bolle
Commit a7cbe92cef27 ("ARM: tegra: remove tegra EMC scaling driver") removed the only user of TEGRA_EMC_SCALING_ENABLE. Remove its Kconfig entry too. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-24ARM: Tidy up DTB Makefile entriesDomenico Andreoli
Few things were out of order: - removed ARCH_BCM2835 duplicate - shuffled ARCH_BCM_5301X, ARCH_U8500 and ARCH_U300 around so to keep the list sorted Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Signed-by: Domenico Andreoli <domenico.andreoli@linux.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-24ARM: fix missing CLKSRC_OF on multi-platformRob Herring
In commit ddb902cc34593e (ARM: centralize common multi-platform kconfig options), CLKSRC_OF was removed from some platforms, but not added to ARCH_MULTIPLATFORM. Fix this. Reported-by: Lauri Hintsala <lauri.hintsala@bluegiga.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-24ARM: spear: add __init to spear_clocksource_init()Alex Elder
I get a build warning because spear_clocksource_init() calls clocksource_mmio_init(), but it doesn't have an __init annotation. Fix that. Signed-off-by: Alex Elder <elder@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-24ARM: pxa: hx4700.h: include "irqs.h" for PXA_NR_BUILTIN_GPIOAndrea Adami
hx4700 needs the same fix as in 9705e74671f0e4f994d86b00cecf441917c64a66 "ARM: pxa: fix various compilation problems" Fix build errors. Initial one is: /linux/arch/arm/mach-pxa/include/mach/hx4700.h:18:32: error: 'PXA_NR_BUILTIN_GPIO' undeclared here (not in a function) | #define HX4700_ASIC3_GPIO_BASE PXA_NR_BUILTIN_GPIO Cc: stable@vger.kernel.org # v3.13+ Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-24hwmon: (ltc2945) Don't crash the kernel unnecessarilyGuenter Roeck
An implementation error should not crash the kernel if it is avoidable. Replace BUG() with WARN_ONCE(). Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-04-24drm/tegra: restrict plane loops to legacy planesDaniel Vetter
In Matt Ropers primary plane series a set of prep patches like commit af2b653bfb4ef40931b4d101ca842ce0c5da57ef Author: Matt Roper <matthew.d.roper@intel.com> Date: Tue Apr 1 15:22:32 2014 -0700 drm/i915: Restrict plane loops to only operate on overlay planes (v2) ensured that all exisiting users of the mode_config->plane_list wouldn't change behaviour. Unfortunately tegra seems to have fallen through the cracks. Fix it. This regression was introduced in commit e13161af80c185ecd8dc4641d0f5df58f9e3e0af Author: Matt Roper <matthew.d.roper@intel.com> Date: Tue Apr 1 15:22:38 2014 -0700 drm: Add drm_crtc_init_with_planes() (v2) The result was that we've unref'ed the fb for the primary plane twice, leading to a use-after free bug. This is because the drm core will already set crtc->primary->fb to NULL and do the unref for us, and the crtc disable hook is called by the drm crtc helpers for exactly this case. Aside: Now that the fbdev helpers clean up planes there's no longer a need to do this in drivers. So this could probably be nuked entirely in linux-next. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-04-24hwmon: (vexpress) Avoid creating non-existing attributesPawel Moll
The 'label' attribute was always created but returned -ENOENT if there is no label and such behaviour is undefined from libsensors' point of view. Fixed by providing is_visible method in the attributes group, so the attribute is not created at all when unnecessary. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-04-24hwmon: (vexpress) Use legal hwmon device namesPawel Moll
The driver used to directly us a DT 'compatible' property for the 'name' attribute of the hwmon devices. Unfortunately it contains '-' which is illegal in this context. It messes up libsensors and thus every application using it. Fixed by providing equivalent (and simpler) name strings. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-04-24ASoC: core: Add one dai_get_widget helper instead of two rtd based onesBenoit Cousson
Replace rtd_get_codec_widget() and rtd_get_cpu_widget() by a simple dai_get_widget() in preparation for DAI-multicodec support, per Lars suggestion. No functional change. Signed-off-by: Benoit Cousson <bcousson@baylibre.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-24ASoC: core: Add helpers for dai link and aux dev initMisael Lopez Cruz
Separate DAI link and aux dev initialization in preparation for DAI multicodec support. Since aux dev will remain using single codecs but DAI links will be able to support multiple codecs. No functional change. Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> [fparent@baylibre.com: Adapt to 3.14+] Signed-off-by: Fabien Parent <fparent@baylibre.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-24ASoC: simple-card: Improve coding styleNicolin Chen
Improve indentation and space. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-24ASoC: simple-card: Simplify error msg in simple_card_dai_link_of()Nicolin Chen
It would look better to use prop instead. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-24ASoC: simple-card: Drop node->name checkingNicolin Chen
The current simple-card driver limits the DT node name to "sound". Any of other names is forbidden while actually we should allow DT to pass other node names. And if this function is being called, the node must already have the compatible "simple-audio-card" in DTB. So there should be no need to check the name here. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-24ASoC: fsl: Drop formats limitation for imx-pcm-dma.cNicolin Chen
Now ASoC core is getting the intersection of supported formats not only from CPU and CODEC dai's but also from DMA's. However, there should be no specific width limitation from SDMA side. So drop it. Otherwise, we would only support S16_LE format for all i.MX platforms. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-24ASoC: fsl_spdif: Add core clock control for DMA accessNicolin Chen
Regmap is able to enable/disable the core clock automatically each time it's going to access the registers. But for DMA cases during playback or recording, it's totally beyong control of regmap. So we have to open the clock manually. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-24arm/mach-vexpress: array accessed out of boundsHeinrich Schuchardt
dcscb_allcpus_mask is an array of size 2. The index variable cluster has to be checked against this limit before accessing the array. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2014-04-24clk: vexpress: NULL dereference on error pathDan Carpenter
If the allocation fails then we dereference the NULL in the error path. Just return directly. Fixes: ed27ff1db869 ('clk: Versatile Express clock generators ("osc") driver') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2014-04-24drm/i915: Allow full PPGTT with param overrideBen Widawsky
When PPGTT was disabled by default, the patch also prevented the user from overriding this behavior via module parameter. Being able to test this on arbitrary kernels is extremely beneficial to track down the remaining bugs. The patch that prevented this was: commit 93a25a9e2d67765c3092bfaac9b855d95e39df97 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Mar 6 09:40:43 2014 +0100 drm/i915: Disable full ppgtt by default By default PPGTT is set to -1. 0 means off, 1 means aliasing only, 2 means full, all other values are reserved. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-04-24drm/i915: Discard BIOS framebuffers too small to accommodate chosen modeChris Wilson
If the inherited BIOS framebuffer is smaller than the mode selected for fbdev, then if we continue to use it then we cause display corruption as we do not setup the panel fitter to upscale. Regression from commit d978ef14456a38034f6c0e94a794129501f89200 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Fri Mar 7 08:57:51 2014 -0800 drm/i915: Wrap the preallocated BIOS framebuffer and preserve for KMS fbcon v12 v2: Add a debug message to track the discard of the BIOS fb. v3: Ville pointed out the difference between ref/unref Reported-by: Knut Petersen <Knut_Petersen@t-online.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77767 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-04-24ASoC: Intel: Cancel hsw_notification_work before freeing the streamJarkko Nikula
I suppose there is a possibility that hsw_notification_work() may run after sst_hsw_stream_free() which can lead to a kernel crash since struct sst_hsw_stream is freed at that point and stream = container_of(work, struct sst_hsw_stream, notify_work) is not valid when hsw_notification_work() is run. Reported-by: Derek Basehore <dbasehore@chromium.org> Reported-by: Wenkai Du <wenkai.du@intel.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-24ASoC: imx-audmux: Fix section mismatchLars-Peter Clausen
audmux_debugfs_init() is marked as __init, but is called from imx_audmux_probe() which is not marked as __init. This creates a section mismatch and a potential runtime crash (if imx_audmux_probe() is called after the .init section was dropped). This patch removes the __init annotation from audmux_debugfs_init(), which fixes the following warning: WARNING: sound/soc/built-in.o(.text+0x86960): Section mismatch in reference from the function imx_audmux_probe() to the function .init.text:audmux_debugfs_init() Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-24HID: multitouch: add support of EliteGroup 05D8 panelsTomas Sokorai
They need to have the class SERIAL. Note: it is a Win 7 panel, not Win 8 certified. Signed-off-by: Tomas Sokorai <tsokorai@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit (git 2.34.1) at 2025-09-18 14:39:11 +0000