summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-06-21regulator: IRQ based event/error notification helpersMatti Vaittinen
Provide helper function for IC's implementing regulator notifications when an IRQ fires. The helper also works for IRQs which can not be acked. Helper can be set to disable the IRQ at handler and then re-enabling it on delayed work later. The helper also adds regulator_get_error_flags() errors in cache for the duration of IRQ disabling. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/ebdf86d8c22b924667ec2385330e30fcbfac0119.1622628334.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-21regulator: move rdev_print helpers to internal.hMatti Vaittinen
The rdev print helpers are a nice way to print messages related to a specific regulator device. Move them from core.c to internal.h As the rdev print helpers use rdev_get_name() export it from core.c. Also move the declaration from coupler.h to driver.h because the rdev name is not just a coupled regulator property. I guess the main audience for rdev_get_name() will be the regulator core and drivers. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/dc7fd70dc31de4d0e820b7646bb78eeb04f80735.1622628333.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-21regulator: add warning flagsMatti Vaittinen
Add 'warning' level events and error flags to regulator core. Current regulator core notifications are used to inform consumers about errors where HW is misbehaving in such way it is assumed to be broken/unrecoverable. There are PMICs which are designed for system(s) that may have use for regulator indications sent before HW is damaged so that some board/consumer specific recovery-event can be performed while continuing most of the normal operations. Add new WARNING level events and notifications to be used for that purpose. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/9b54aa5589ae4b5945d53d114bac3fae55fa4818.1622628333.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-21thermal: Use generic HW-protection shutdown APIMatti Vaittinen
The hardware shutdown function was exported from kernel/reboot for other subsystems to use. Logic is copied from the thermal_core. The protection mutex is replaced by an atomic_t to allow calls also from an IRQ context. Also the WARN() was replaced by pr_emerg() based on discussions here: https://lore.kernel.org/lkml/YJuPwAZroVZ%2Fw633@alley/ and here: https://lore.kernel.org/linux-iommu/20210331093104.383705-4-geert+renesas@glider.be/ Use the exported API instead of implementing own just for the thermal_core. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/5531e89d9e710f5d10e7cdce3ee58957335b9e03.1622628333.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-21reboot: Add hardware protection power-offMatti Vaittinen
There can be few cases when we need to shut-down the system in order to protect the hardware. Currently this is done at least by the thermal core when temperature raises over certain limit. Some PMICs can also generate interrupts for example for over-current or over-voltage, voltage drops, short-circuit, ... etc. On some systems these are a sign of hardware failure and only thing to do is try to protect the rest of the hardware by shutting down the system. Add shut-down logic which can be used by all subsystems instead of implementing the shutdown in each subsystem. The logic is stolen from thermal_core with difference of using atomic_t instead of a mutex in order to allow calls directly from IRQ context and changing the WARN() to pr_emerg() as discussed here: https://lore.kernel.org/lkml/YJuPwAZroVZ%2Fw633@alley/ and here: https://lore.kernel.org/linux-iommu/20210331093104.383705-4-geert+renesas@glider.be/ Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/e83ec1ca9408f90c857ea9dcdc57b14d9037b03f.1622628333.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-21regulator: Add protection limit propertiesMatti Vaittinen
Support specifying protection/error/warning limits for regulator over current, over temperature and over/under voltage. Most of the PMICs support only "protection" feature but few setups do also support error/warning level indications. On many ICs most of the protection limits can't actually be set. But for example the ampere limit for over-current protection on ROHM BD9576 can be configured - or feature can be completely disabled. Provide limit setting for all protections/errors for the sake of the completeness and do that using own properties for all so that not all users would need to set all levels when only one or few are supported. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/ae2c6056d5ed1334912d27e736d23c9151065433.1622628333.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-21regulator: hi6421v600: Fix setting idle modeAxel Lin
commit db27f8294cd7 changed eco_mode << (ffs(sreg->eco_mode_mask) - 1) to sreg->eco_mode_mask << (ffs(sreg->eco_mode_mask) - 1) which is wrong. Fix it by simply set val = sreg->eco_mode_mask. In additional, sreg->eco_mode_mask can be 0 (LDO3, LDO33, LDO34). Return -EINVAL if idle mode is not supported when sreg->eco_mode_mask is 0. While at it, also use unsigned int for reg_val/val which is the expected type for regmap_read and regmap_update_bits. Fixes: db27f8294cd7 ("staging: regulator: hi6421v600-regulator: use shorter names for OF properties") Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20210619123423.4091429-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-21regulator: Add MAX8893 bindingsSergey Larin
Add Maxim MAX8893 PMIC device tree bindings. The example is also provided. Signed-off-by: Sergey Larin <cerg2010cerg2010@mail.ru> Link: https://lore.kernel.org/r/20210618141607.884-2-cerg2010cerg2010@mail.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-21regulator: max8893: add regulator driverSergey Larin
MAX8893 is a simple regulator which can be found on some of Sasmsung phones. Signed-off-by: Sergey Larin <cerg2010cerg2010@mail.ru> Link: https://lore.kernel.org/r/20210618141607.884-1-cerg2010cerg2010@mail.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-21regulator: hi6421: Use correct variable type for regmap api val argumentAxel Lin
Use unsigned int instead of u32 for regmap_read/regmap_update_bits val argument. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20210619124133.4096683-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-21regulator: qcom,rpmh-regulator: Add compatible for SA8155p-adp board pmicBhupesh Sharma
Add compatible string for pmm8155au pmic found on the SA8155p-adp board. Cc: Mark Brown <broonie@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210617051712.345372-3-bhupesh.sharma@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-21regulator: qcom,rpmh-regulator: Arrange compatibles alphabeticallyBhupesh Sharma
Arrange the compatibles inside qcom-rpmh regulator device tree bindings alphabetically. Cc: Mark Brown <broonie@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210617051712.345372-2-bhupesh.sharma@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-21regulator: qcom-rpmh: Add new regulator found on SA8155p adp boardBhupesh Sharma
SA8155p-adp board supports a new regulator - pmm8155au. The output power management circuits in this regulator include: - FTS510 smps, - HFS510 smps, and - LDO510 linear regulators Add support for the same. Cc: Mark Brown <broonie@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210617051712.345372-6-bhupesh.sharma@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-21regulator: qcom-rpmh: Add terminator at the end of pm7325x_vreg_data[] arrayBhupesh Sharma
Add missing terminator(s) at the end of pm7325x_vreg_data[] array instances. Fixes: c4e5aa3dbee5 ("regulator: qcom-rpmh: Add PM7325/PMR735A regulator support") Cc: Mark Brown <broonie@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Link: https://lore.kernel.org/r/20210617051712.345372-5-bhupesh.sharma@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-21regulator: qcom-rpmh: Cleanup terminator line commasBhupesh Sharma
Cleanup the qcom-rpmh regulator driver to remove comma(s) at the end of the terminator line(s). Cc: Mark Brown <broonie@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Link: https://lore.kernel.org/r/20210617051712.345372-4-bhupesh.sharma@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-21regulator: hi655x: Fix pass wrong pointer to config.driver_dataAxel Lin
Current code sets config.driver_data to a zero initialized regulator which is obviously wrong. Fix it. Fixes: 4618119b9be5 ("regulator: hi655x: enable regulator for hi655x PMIC") Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20210620132715.60215-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-21arm64: insn: avoid circular include dependencyMark Rutland
Nathan reports that when building with CONFIG_LTO_CLANG_THIN=y, the build fails due to BUILD_BUG_ON() not being defined before its uss in <asm/insn.h>. The problem is that with LTO, we patch READ_ONCE(), and <asm/rwonce.h> includes <asm/insn.h>, creating a circular include chain: <linux/build_bug.h> <linux/compiler.h> <asm/rwonce.h> <asm/alternative-macros.h> <asm/insn.h> <linux/build-bug.h> ... and so when <asm/insn.h> includes <linux/build_bug.h>, none of the BUILD_BUG* definitions have happened yet. To avoid this, let's move AARCH64_INSN_SIZE into a header without any dependencies, such that it can always be safely included. At the same time, avoid including <asm/alternative.h> in <asm/insn.h>, which should no longer be necessary (and doesn't make sense when insn.h is consumed by userspace). Reported-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210621080830.GA37068@C02TD0UTHF1T.local Fixes: 3e00e39d9dad ("arm64: insn: move AARCH64_INSN_SIZE into <asm/insn.h>") Signed-off-by: Will Deacon <will@kernel.org>
2021-06-21printk: Remove trailing semicolon in macrosHuilong Deng
Macros should not use a trailing semicolon. Signed-off-by: Huilong Deng <denghuilong@cdjrlc.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2021-06-21s390/stack: fix possible register corruption with stack switch helperHeiko Carstens
The CALL_ON_STACK macro is used to call a C function from inline assembly, and therefore must consider the C ABI, which says that only registers 6-13, and 15 are non-volatile (restored by the called function). The inline assembly incorrectly marks all registers used to pass parameters to the called function as read-only input operands, instead of operands that are read and written to. This might result in register corruption depending on usage, compiler, and compile options. Fix this by marking all operands used to pass parameters as read/write operands. To keep the code simple even register 6, if used, is marked as read-write operand. Fixes: ff340d2472ec ("s390: add stack switch helper") Cc: <stable@kernel.org> # 4.20 Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-21s390/topology: clear thread/group maps for offline cpusSven Schnelle
The current code doesn't clear the thread/group maps for offline CPUs. This may cause kernel crashes like the one bewlow in common code that assumes if a CPU has sibblings it is online. Unable to handle kernel pointer dereference in virtual kernel address space Call Trace: [<000000013a4b8c3c>] blk_mq_map_swqueue+0x10c/0x388 ([<000000013a4b8bcc>] blk_mq_map_swqueue+0x9c/0x388) [<000000013a4b9300>] blk_mq_init_allocated_queue+0x448/0x478 [<000000013a4b9416>] blk_mq_init_queue+0x4e/0x90 [<000003ff8019d3e6>] loop_add+0x106/0x278 [loop] [<000003ff801b8148>] loop_init+0x148/0x1000 [loop] [<0000000139de4924>] do_one_initcall+0x3c/0x1e0 [<0000000139ef449a>] do_init_module+0x6a/0x2a0 [<0000000139ef61bc>] __do_sys_finit_module+0xa4/0xc0 [<0000000139de9e6e>] do_syscall+0x7e/0xd0 [<000000013a8e0aec>] __do_syscall+0xbc/0x110 [<000000013a8ee2e8>] system_call+0x78/0xa0 Fixes: 52aeda7accb6 ("s390/topology: remove offline CPUs from CPU topology masks") Cc: <stable@kernel.org> # 5.7+ Reported-by: Marius Hillenbrand <mhillen@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-21s390/vfio-ap: clean up mdev resources when remove callback invokedTony Krowiak
The mdev remove callback for the vfio_ap device driver bails out with -EBUSY if the mdev is in use by a KVM guest (i.e., the KVM pointer in the struct ap_matrix_mdev is not NULL). The intended purpose was to prevent the mdev from being removed while in use. There are two problems with this scenario: 1. Returning a non-zero return code from the remove callback does not prevent the removal of the mdev. 2. The KVM pointer in the struct ap_matrix_mdev will always be NULL because the remove callback will not get invoked until the mdev fd is closed. When the mdev fd is closed, the mdev release callback is invoked and clears the KVM pointer from the struct ap_matrix_mdev. Let's go ahead and remove the check for KVM in the remove callback and allow the cleanup of mdev resources to proceed. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20210609224634.575156-2-akrowiak@linux.ibm.com Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-21s390: clear pt_regs::flags on irq entrySven Schnelle
The current irq entry code doesn't initialize pt_regs::flags. On exit to user mode arch_do_signal_or_restart() tests whether PIF_SYSCALL is set, which might yield wrong results. Fix this by clearing pt_regs::flags in the entry.S irq handler code. Reported-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Fixes: 56e62a737028 ("s390: convert to generic entry") Cc: <stable@vger.kernel.org> # 5.12 Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-21s390: fix system call restart with multiple signalsSven Schnelle
glibc complained with "The futex facility returned an unexpected error code.". It turned out that the futex syscall returned -ERESTARTSYS because a signal is pending. arch_do_signal_or_restart() restored the syscall parameters (nameley regs->gprs[2]) and set PIF_SYSCALL_RESTART. When another signal is made pending later in the exit loop arch_do_signal_or_restart() is called again. This function clears PIF_SYSCALL_RESTART and checks the return code which is set in regs->gprs[2]. However, regs->gprs[2] was restored in the previous run and no longer contains -ERESTARTSYS, so PIF_SYSCALL_RESTART isn't set again and the syscall is skipped. Fix this by not clearing PIF_SYSCALL_RESTART - it is already cleared in __do_syscall() when the syscall is restarted. Reported-by: Bjoern Walk <bwalk@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Fixes: 56e62a737028 ("s390: convert to generic entry") Cc: <stable@vger.kernel.org> # 5.12 Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-21cpu/hotplug: Cure the cpusets trainwreckThomas Gleixner
Alexey and Joshua tried to solve a cpusets related hotplug problem which is user space visible and results in unexpected behaviour for some time after a CPU has been plugged in and the corresponding uevent was delivered. cpusets delegate the hotplug work (rebuilding cpumasks etc.) to a workqueue. This is done because the cpusets code has already a lock nesting of cgroups_mutex -> cpu_hotplug_lock. A synchronous callback or waiting for the work to finish with cpu_hotplug_lock held can and will deadlock because that results in the reverse lock order. As a consequence the uevent can be delivered before cpusets have consistent state which means that a user space invocation of sched_setaffinity() to move a task to the plugged CPU fails up to the point where the scheduled work has been processed. The same is true for CPU unplug, but that does not create user observable failure (yet). It's still inconsistent to claim that an operation is finished before it actually is and that's the real issue at hand. uevents just make it reliably observable. Obviously the problem should be fixed in cpusets/cgroups, but untangling that is pretty much impossible because according to the changelog of the commit which introduced this 8 years ago: 3a5a6d0c2b03("cpuset: don't nest cgroup_mutex inside get_online_cpus()") the lock order cgroups_mutex -> cpu_hotplug_lock is a design decision and the whole code is built around that. So bite the bullet and invoke the relevant cpuset function, which waits for the work to finish, in _cpu_up/down() after dropping cpu_hotplug_lock and only when tasks are not frozen by suspend/hibernate because that would obviously wait forever. Waiting there with cpu_add_remove_lock, which is protecting the present and possible CPU maps, held is not a problem at all because neither work queues nor cpusets/cgroups have any lockchains related to that lock. Waiting in the hotplug machinery is not problematic either because there are already state callbacks which wait for hardware queues to drain. It makes the operations slightly slower, but hotplug is slow anyway. This ensures that state is consistent before returning from a hotplug up/down operation. It's still inconsistent during the operation, but that's a different story. Add a large comment which explains why this is done and why this is not a dump ground for the hack of the day to work around half thought out locking schemes. Document also the implications vs. hotplug operations and serialization or the lack of it. Thanks to Alexy and Joshua for analyzing why this temporary sched_setaffinity() failure happened. Fixes: 3a5a6d0c2b03("cpuset: don't nest cgroup_mutex inside get_online_cpus()") Reported-by: Alexey Klimov <aklimov@redhat.com> Reported-by: Joshua Baker <jobaker@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexey Klimov <aklimov@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87tuowcnv3.ffs@nanos.tec.linutronix.de
2021-06-21nvmet: use NVMET_MAX_NAMESPACES to set nn valueChaitanya Kulkarni
For Spec regarding MNAN value:- If the controller supports Asymmetric Namespace Access Reporting, then this field shall be set to a non-zero value that is less than or equal to the NN value. Instead of using subsys->max_nsid that gets calculated dynamically, use NVMET_MAX_NAMESPACES value to report NN. This way we will maintain the MNAN value spec compliant with NN. Without this patch, code results in the following error :- [337976.409142] nvme nvme1: Invalid MNAN value 1024 Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-06-20smb311: remove dead code for non compounded posix query infoSteve French
Although we may need this in some cases in the future, remove the currently unused, non-compounded version of POSIX query info, SMB11_posix_query_info (instead smb311_posix_query_path_info is now called e.g. when revalidating dentries or retrieving info for getattr) Addresses-Coverity: 1495708 ("Resource leaks") Signed-off-by: Steve French <stfrench@microsoft.com>
2021-06-20cifs: fix SMB1 error path in cifs_get_file_info_unixSteve French
We were trying to fill in uninitialized file attributes in the error case. Addresses-Coverity: 139689 ("Uninitialized variables") Signed-off-by: Steve French <stfrench@microsoft.com>
2021-06-20smb3: fix uninitialized value for port in witness protocol moveSteve French
Although in practice this can not occur (since IPv4 and IPv6 are the only two cases currently supported), it is cleaner to avoid uninitialized variable warnings. Addresses smatch warning: fs/cifs/cifs_swn.c:468 cifs_swn_store_swn_addr() error: uninitialized symbol 'port'. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> CC: Samuel Cabrero <scabrero@suse.de> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-06-20cifs: fix unneeded null checkSteve French
tcon can not be null in SMB2_tcon function so the check is not relevant and removing it makes Coverity happy. Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> Addresses-Coverity: 13250131 ("Dereference before null check") Signed-off-by: Steve French <stfrench@microsoft.com>
2021-06-20cifs: use SPDX-Licence-IdentifierSteve French
Add SPDX license identifier and replace license boilerplate. Corrects various checkpatch errors with the older format for noting the LGPL license. Signed-off-by: Steve French <stfrench@microsoft.com>
2021-06-20cifs: convert list_for_each to entry variant in cifs_debug.cBaokun Li
convert list_for_each() to list_for_each_entry() where applicable. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-06-20cifs: convert list_for_each to entry variant in smb2misc.cBaokun Li
convert list_for_each() to list_for_each_entry() where applicable. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-06-20cifs: avoid extra calls in posix_info_parseRonnie Sahlberg
In posix_info_parse() we call posix_info_sid_size twice for each of the owner and the group sid. The first time to check that it is valid, i.e. >= 0 and the second time to just pass it in as a length to memcpy(). As this is a pure function we know that it can not be negative the second time and this is technically a false warning in coverity. However, as it is a pure function we are just wasting cycles by calling it a second time. Record the length from the first time we call it and save some cycles as well as make Coverity happy. Addresses-Coverity-ID: 1491379 ("Argument can not be negative") Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-06-20cifs: retry lookup and readdir when EAGAIN is returned.Thiago Rafael Becker
According to the investigation performed by Jacob Shivers at Red Hat, cifs_lookup and cifs_readdir leak EAGAIN when the user session is deleted on the server. Fix this issue by implementing a retry with limits, as is implemented in cifs_revalidate_dentry_attr. Reproducer based on the work by Jacob Shivers: ~~~ $ cat readdir-cifs-test.sh #!/bin/bash # Install and configure powershell and sshd on the windows # server as descibed in # https://docs.microsoft.com/en-us/windows-server/administration/openssh/openssh_overview # This script uses expect(1) USER=dude SERVER=192.168.0.2 RPATH=root PASS='password' function debug_funcs { for line in $@ ; do echo "func $line +p" > /sys/kernel/debug/dynamic_debug/control done } function setup { echo 1 > /proc/fs/cifs/cifsFYI debug_funcs wait_for_compound_request \ smb2_query_dir_first cifs_readdir \ compound_send_recv cifs_reconnect_tcon \ generic_ip_connect cifs_reconnect \ smb2_reconnect_server smb2_reconnect \ cifs_readv_from_socket cifs_readv_receive tcpdump -i eth0 -w cifs.pcap host 192.168.2.182 & sleep 5 dmesg -C } function test_call { if [[ $1 == 1 ]] ; then tracer="strace -tt -f -s 4096 -o trace-$(date -Iseconds).txt" fi # Change the command here to anything appropriate $tracer ls $2 > /dev/null res=$? if [[ $1 == 1 ]] ; then if [[ $res == 0 ]] ; then 1>&2 echo success else 1>&2 echo "failure ($res)" fi fi } mountpoint /mnt > /dev/null || mount -t cifs -o username=$USER,pass=$PASS //$SERVER/$RPATH /mnt test_call 0 /mnt/ /usr/bin/expect << EOF set timeout 60 spawn ssh $USER@$SERVER expect "yes/no" { send "yes\r" expect "*?assword" { send "$PASS\r" } } "*?assword" { send "$PASS\r" } expect ">" { send "powershell close-smbsession -force\r" } expect ">" { send "exit\r" } expect eof EOF sysctl -w vm.drop_caches=2 > /dev/null sysctl -w vm.drop_caches=2 > /dev/null setup test_call 1 /mnt/ ~~~ Signed-off-by: Thiago Rafael Becker <trbecker@gmail.com> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-06-20cifs: fix check of dfs interlinksPaulo Alcantara
Interlink is a special type of DFS link that resolves to a different DFS domain-based namespace. To determine whether it is an interlink or not, check if ReferralServers and StorageServers bits are set to 1 and 0 respectively in ReferralHeaderFlags, as specified in MS-DFSC 3.1.5.4.5 Determining Whether a Referral Response is an Interlink. Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-06-20cifs: decoding negTokenInit with generic ASN1 decoderHyunchul Lee
Decode negTokenInit with lib/asn1_decoder. For that, add OIDs in linux/oid_registry.h and a negTokenInit ASN1 file, "spnego_negtokeninit.asn1". And define decoder's callback functions, which are the gssapi_this_mech for checking SPENGO oid and the neg_token_init_mech_type for getting authentication mechanisms supported by a server. Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-06-20cifs: avoid starvation when refreshing dfs cachePaulo Alcantara
When refreshing the DFS cache, keep SMB2 IOCTL calls as much outside critical sections as possible and avoid read/write starvation when getting new DFS referrals by using broken or slow connections. Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-06-20cifs: enable extended stats by defaultSteve French
CONFIG_CIFS_STATS2 can be very useful since it shows latencies by command, and allows enabling the slow response dynamic tracepoint which can be useful to identify performance problems. For example: Total time spent processing by command. Time units are jiffies (1000 per second) SMB3 CMD Number Total Time Fastest Slowest -------- ------ ---------- ------- ------- 0 1 2 2 2 1 2 6 2 4 2 0 0 0 0 3 4 11 2 4 4 2 16 5 11 5 4546 34104 2 487 6 4421 32901 2 487 7 0 0 0 0 8 695 2781 2 39 9 391 1708 2 27 10 0 0 0 0 11 4 6 1 2 12 0 0 0 0 13 0 0 0 0 14 3887 17696 0 128 15 0 0 0 0 16 1471 9950 1 487 17 169 2695 9 116 18 80 381 2 10 1 2 6 2 4 2 0 0 0 0 3 4 11 2 4 4 2 16 5 11 5 4546 34104 2 487 6 4421 32901 2 487 7 0 0 0 0 8 695 2781 2 39 9 391 1708 2 27 10 0 0 0 0 11 4 6 1 2 12 0 0 0 0 13 0 0 0 0 14 3887 17696 0 128 15 0 0 0 0 16 1471 9950 1 487 17 169 2695 9 116 18 80 381 2 10 Reviewed-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-06-20cifs: missed ref-counting smb session in findShyam Prasad N
When we lookup an smb session based on session id, we did not up the ref-count for the session. This can potentially cause issues if the session is freed from under us. Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-06-20cifs: do not share tcp servers with dfs mountsPaulo Alcantara
It isn't enough to have unshared tcons because multiple DFS mounts can connect to same target server and failover to different servers, so we can't use a single tcp server for such cases. For the simplest solution, use nosharesock option to achieve that. Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-06-20cifs: set a minimum of 2 minutes for refreshing dfs cachePaulo Alcantara
We don't want to refresh the dfs cache in very short intervals, so setting a minimum interval of 2 minutes is OK. If it needs to be refreshed immediately, one could have the cache cleared with $ echo 0 > /proc/fs/cifs/dfscache and then remounting the dfs share. Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-06-20cifs: fix path comparison and hash calcPaulo Alcantara
Fix cache lookup and hash calculations when handling paths with different cases. Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-06-20cifs: handle different charsets in dfs cachePaulo Alcantara
Convert all dfs paths to dfs cache's local codepage (@cache_cp) and avoid mixing them with different charsets. Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-06-20cifs: keep referral server sessions alivePaulo Alcantara
At every mount, keep all sessions alive that were used for chasing the DFS referrals as long as the dfs mounts are active. Use those sessions in DFS cache to refresh all active tcons as well as cached entries. They will be managed by a list of mount_group structures that will be indexed by a randomly generated uuid at mount time, so we can put all the sessions related to specific dfs mounts and avoid leaking them. Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-06-20cifs: get rid of @noreq param in __dfs_cache_find()Paulo Alcantara
@noreq param isn't used anywhere, so just remove it. Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-06-20cifs: do not send tree disconnect to ipc sharesPaulo Alcantara
On session close, the IPC is closed and the server must release all tcons of the session. It doesn't matter if we send a ipc close or not. Besides, it will make the server to not close durable and resilient files on session close, as specified in MS-SMB2 3.3.5.6 Receiving an SMB2 LOGOFF Request. Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-06-20cifs: improve fallocate emulationRonnie Sahlberg
RHBZ: 1866684 We don't have a real fallocate in the SMB2 protocol so we used to emulate fallocate by simply switching the file to become non-sparse. But as that could potantially consume a lot more data than we intended to fallocate (large sparse file and fallocating a thin slice in the middle) we would only do this IFF the fallocate request was for virtually the entire file. This patch improves this and starts allowing us to fallocate smaller chunks of a file by overwriting the region with 0, for the parts that are unallocated. The method used is to first query the server for FSCTL_QUERY_ALLOCATED_RANGES to find what is unallocated in the fallocate range and then to only overwrite-with-zero the unallocated ranges to fill in the holes. As overwriting-with-zero is different from just allocating blocks, and potentially much more expensive, we limit this to only allow fallocate ranges up to 1Mb in size. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Acked-by: Aurelien Aptel <aaptel@suse.com> Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-06-20cifs: fix doc warnings in cifs_dfs_ref.cBaokun Li
Add description for `cifs_compose_mount_options` to fix the W=1 warnings: fs/cifs/cifs_dfs_ref.c:139: warning: Function parameter or member 'devname' not described in 'cifs_compose_mount_options' Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-06-20cifs: remove redundant initialization of variable rcColin Ian King
The variable rc is being initialized with a value that is never read, the assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-06-20cifs: Constify static struct genl_opsRikard Falkeborn
The only usage of cifs_genl_ops[] is to assign its address to the ops field in the genl_family struct, which is a pointer to const. Make it const to allow the compiler to put it in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
generated by cgit (git 2.34.1) at 2025-09-14 23:25:56 +0000