summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-04-20spi: altera: Add DFL bus driver for Altera API ControllerMatthew Gerlach
This patch adds a Device Feature List (DFL) bus driver for the Altera SPI Master controller. The SPI master is connected to an Intel SPI Slave to Avalon Bridge inside an Intel MAX10 BMC Chip. Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Link: https://lore.kernel.org/r/20210416165720.554144-3-matthew.gerlach@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-20spi: altera: separate core code from platform codeMatthew Gerlach
In preparation of adding support for a new bus type, separate the core spi-altera code from the platform driver code. Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Link: https://lore.kernel.org/r/20210416165720.554144-2-matthew.gerlach@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-20x86/crash: Fix crash_setup_memmap_entries() out-of-bounds accessMike Galbraith
Commit in Fixes: added support for kexec-ing a kernel on panic using a new system call. As part of it, it does prepare a memory map for the new kernel. However, while doing so, it wrongly accesses memory it has not allocated: it accesses the first element of the cmem->ranges[] array in memmap_exclude_ranges() but it has not allocated the memory for it in crash_setup_memmap_entries(). As KASAN reports: BUG: KASAN: vmalloc-out-of-bounds in crash_setup_memmap_entries+0x17e/0x3a0 Write of size 8 at addr ffffc90000426008 by task kexec/1187 (gdb) list *crash_setup_memmap_entries+0x17e 0xffffffff8107cafe is in crash_setup_memmap_entries (arch/x86/kernel/crash.c:322). 317 unsigned long long mend) 318 { 319 unsigned long start, end; 320 321 cmem->ranges[0].start = mstart; 322 cmem->ranges[0].end = mend; 323 cmem->nr_ranges = 1; 324 325 /* Exclude elf header region */ 326 start = image->arch.elf_load_addr; (gdb) Make sure the ranges array becomes a single element allocated. [ bp: Write a proper commit message. ] Fixes: dd5f726076cc ("kexec: support for kexec on panic using new system call") Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Dave Young <dyoung@redhat.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/725fa3dc1da2737f0f6188a1a9701bead257ea9d.camel@gmx.de
2021-04-20platform/surface: aggregator: fix a bit testDan Carpenter
The "funcs" variable is a u64. If "func" is more than 31 then the BIT() shift will wrap instead of testing the high bits. Fixes: c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/YH6UUhJhGk3mk13b@mwanda Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-20platform/x86: intel_pmc_core: Fix "unsigned 'ret' is never less than zero" ↵Hans de Goede
smatch warning Change the type of ret form a size_t to a ssize_t, matching the prototype of simple_write_to_buffer(), fixing this warning reported by smatch: drivers/platform/x86/intel_pmc_core.c:1369 pmc_core_lpm_latch_mode_write() warn: unsigned 'ret' is never less than zero. Fixes: 8074a79fad2e ("platform/x86: intel_pmc_core: Add option to set/clear LPM mode") Cc: David E. Box <david.e.box@linux.intel.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210419143109.30612-1-hdegoede@redhat.com
2021-04-20tracing: Fix checking event hash pointer logic when tp_printk is enabledSteven Rostedt (VMware)
Pointers in events that are printed are unhashed if the flags allow it, and the logic to do so is called before processing the event output from the raw ring buffer. In most cases, this is done when a user reads one of the trace files. But if tp_printk is added on the kernel command line, this logic is done for trace events when they are triggered, and their output goes out via printk. The unhash logic (and even the validation of the output) did not support the tp_printk output, and would crash. Link: https://lore.kernel.org/linux-tegra/9835d9f1-8d3a-3440-c53f-516c2606ad07@nvidia.com/ Fixes: efbbdaa22bb7 ("tracing: Show real address for trace event arguments") Reported-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-04-20hwmon: Remove amd_energy driverGuenter Roeck
Commit 60268b0e8258 ("hwmon: (amd_energy) modify the visibility of the counters") restricted visibility of AMD energy counters to work around a side-channel attack using energy data to determine which instructions are executed. The attack is described in 'PLATYPUS: Software-based Power Side-Channel Attacks on x86'. It relies on quick and accurate energy readings. This change made the counters provided by the amd_energy driver effectively unusable for non-provileged users. However, unprivileged read access is the whole point of hardware monitoring attributes. An attempt to remedy the situation by limiting and randomizing access to chip registers was rejected by AMD. Since the driver is for all practical purposes unusable, remove it. Cc: Naveen Krishna Chatradhi <nchatrad@amd.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: Clarify scope of attribute accessGuenter Roeck
Hardware monitoring sysfs attributes are used and displayed by unrestricted userspace applications. Standard attributes therefore have to be world readable, since otherwise those userspace applications would either have to run as super-user or display an error. None of those makes sense. Clarify the expected scope of attribute access in the ABI document. Cc: Naveen Krishna Chatradhi <nchatrad@amd.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (pmbus) Introduce PMBUS symbol namespaceGuenter Roeck
Exported pmbus symbols are only supposed to be used from PMBus code. Introduce PMBUS symbol namespace to prevent misuse from other code. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (pmbus) Add pmbus driver for MAX15301Erik Rosen
Add pmbus driver support for Maxim MAX15301 InTune Automatically Compensated Digital PoL Controller with Driver and PMBus Telemetry Even though the specification does not specifically mention it, extensive empirical testing has revealed that auto-detection of limit-registers will fail in a random fashion unless the delay parameter is set to above about 80us. The default delay is set to 100us to include some safety margin. This patch is tested on a Flex BMR461 converter module. Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Link: https://lore.kernel.org/r/20210419101251.24840-1-erik.rosen@metormote.com [groeck: Added rationale for delay to driver header] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (sch5627) Remove unnecessary error pathArmin Wolf
Calling remove() on error whould have only unregistered the watchdog, and since a failure in registering him is considered non-fatal and happens last, remove the error path and return the error codes directly. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20210417210920.15496-3-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (sch5627) Use devres functionArmin Wolf
Use devm_hwmon_device_register_with_info() and remove hwmon_dev from sch5627_data struct as it is not needed anymore. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20210417210920.15496-2-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (pmbus/pxe1610) don't bail out when not all pages are activePaul Fertser
Certain VRs might be configured to use only the first output channel and so the mode for the second will be 0. Handle this gracefully. Fixes: b9fa0a3acfd8 ("hwmon: (pmbus/core) Add support for vid mode detection per page bases") Signed-off-by: Paul Fertser <fercerpav@gmail.com> Link: https://lore.kernel.org/r/20210416102926.13614-1-fercerpav@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: Add driver for fsp-3y PSUs and PDUsVáclav Kubernát
This patch adds support for these devices: - YH-5151E - the PDU - YM-2151E - the PSU The device datasheet says that the devices support PMBus 1.2, but in my testing, a lot of the commands aren't supported and if they are, they sometimes behave strangely or inconsistently. For example, writes to the PAGE command requires using PEC, otherwise the write won't work and the page won't switch, even though, the standard says that PEC is optional. On the other hand, writes to SMBALERT don't require PEC. Because of this, the driver is mostly reverse engineered with the help of a tool called pmbus_peek written by David Brownell (and later adopted by my colleague Jan Kundrát). The device also has some sort of a timing issue when switching pages, which is explained further in the code. Because of this, the driver support is limited. It exposes only the values that have been tested to work correctly. Signed-off-by: Václav Kubernát <kubernat@cesnet.cz> Link: https://lore.kernel.org/r/20210414080019.3530794-1-kubernat@cesnet.cz [groeck: Fixed up "missing braces around initializer" from 0-day] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (intel-m10-bmc-hwmon) add sensor support of Intel D5005 cardMatthew Gerlach
Like the Intel N3000 card, the Intel D5005 has a MAX10 based BMC. This commit adds support for the D5005 sensors that are monitored by the MAX10 BMC. Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by: Russ Weight <russell.h.weight@linux.intel.com> Acked-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20210413225835.459662-3-matthew.gerlach@linux.intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (sch5627) Split sch5627_update_device()Armin Wolf
An error in sch5627_update_device() could cause sch5627_read() to fail even if the error did not affect the target sensor type. Split sch5627_update_device() to prevent that. Tested on a Fujitsu Esprimo P720. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210411164225.11967-3-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (sch5627) Convert to hwmon_device_register_with_info()Armin Wolf
hwmon_device_register() is deprecated. Convert driver to use hwmon_device_register_with_info() and remove sysfs attributes which are now being handled by the hwmon subsystem. Channel handling was inspired by corsair-cpro. Tested on a Fujitsu Esprimo P720. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210411164225.11967-2-W_Armin@gmx.de [groeck: Replaced 0 with NULL] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (nct6683) remove useless functionJiapeng Chong
Fix the following clang warning: drivers/hwmon/nct6683.c:491:19: warning: unused function 'in_to_reg' [-Wunused-function]. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/1618293770-55307-1-git-send-email-jiapeng.chong@linux.alibaba.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (dell-smm) Add Dell Latitude E7440 to fan control whitelistSebastian Oechsle
Allow manual PWM control on Dell Latitude E7440. Reviewed-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20210411095741.zmllsuc7pevdipvy@icloud.com Signed-off-by: Sebastian Oechsle <setboolean@icloud.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20MAINTAINERS: Add keyword pattern for hwmon registration functionsGuenter Roeck
A pattern match for hardware monitoring registration functions ensures that hardware monitoring maintainers are copied whenever hardware monitoring drivers are added to the tree. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (mlxreg-fan) Add support for fan drawers capability and present registersVadim Pasternak
Add support for fan drawer's capability and present registers in order to set mapping between the fan drawers and tachometers. Some systems are equipped with fan drawers with one tachometer inside. Others with fan drawers with several tachometers inside. Using present register along with tachometer-to-drawer mapping allows to skip reading missed tachometers and expose input for them as zero, instead of exposing fault code returned by hardware. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20210322172237.2213584-1-vadimp@nvidia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (pmbus/tps53679) Add support for TI TPS53676Erik Rosen
Add support for TI TPS53676 controller to the tps53679 pmbus driver The driver uses the USER_DATA_03 register to figure out how many phases are enabled and to which channel they are assigned, and sets the number of pages and phases accordingly. Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Link: https://lore.kernel.org/r/20210322193734.75127-3-erik.rosen@metormote.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20dt-bindings: Add trivial device entry for TPS53676Erik Rosen
Add trivial device entry for TPS53676 Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210318212441.69050-2-erik.rosen@metormote.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (ftsteutates) Rudimentary typo fixesBhaskar Chowdhury
s/Temprature/Temperature/ s/revsion/revision/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20210323043438.1321903-1-unixbhaskar@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (pmbus) Add driver for BluTek BPA-RS600Chris Packham
The BPA-RS600 is a compact 600W AC to DC removable power supply module. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210317040231.21490-3-chris.packham@alliedtelesis.co.nz [groeck: Added bpa-rs600 to index.rst] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20dt-bindings: Add vendor prefix and trivial device for BluTek BPA-RS600Chris Packham
Add vendor prefix "blutek" for BluTek Power. Add trivial device entry for BPA-RS600. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210317040231.21490-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: replace snprintf in show functions with sysfs_emitGuenter Roeck
coccicheck complains about the use of snprintf() in sysfs show functions. drivers/hwmon/ina3221.c:701:8-16: WARNING: use scnprintf or sprintf This results in a large number of patch submissions. Fix it all in one go using the following coccinelle rules. Use sysfs_emit instead of scnprintf or sprintf since that makes more sense. @depends on patch@ identifier show, dev, attr, buf; @@ ssize_t show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - snprintf(buf, \( PAGE_SIZE \| PAGE_SIZE - 1 \), + sysfs_emit(buf, ...); ...> } @depends on patch@ identifier show, dev, attr, buf, rc; @@ ssize_t show(struct device *dev, struct device_attribute *attr, char *buf) { <... rc = - snprintf(buf, \( PAGE_SIZE \| PAGE_SIZE - 1 \), + sysfs_emit(buf, ...); ...> } While at it, remove unnecessary braces and as well as unnecessary else after return statements to address checkpatch warnings in the resulting patch. Cc: Zihao Tang <tangzihao1@hisilicon.com> Cc: Jay Fang <f.fangjian@huawei.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (pmbus) Replace - with _ in device names before registrationChris Packham
The hwmon sysfs ABI requires that the `name` property doesn't include any dashes. But when the pmbus code picks the name up from the device tree it quite often does. Replace '-' with '_' before registering the device. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20210317040231.21490-2-chris.packham@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: add driver for NZXT Kraken X42/X52/X62/X72Jonas Malaco
These are "all-in-one" CPU liquid coolers that can be monitored and controlled through a proprietary USB HID protocol. While the models have differently sized radiators and come with varying numbers of fans, they are all indistinguishable at the software level. The driver exposes fan/pump speeds and coolant temperature through the standard hwmon sysfs interface. Fan and pump control, while supported by the devices, are not currently exposed. The firmware accepts up to 61 trip points per channel (fan/pump), but the same set of trip temperatures has to be maintained for both; with pwmX_auto_point_Y_temp attributes, users would need to maintain this invariant themselves. Instead, fan and pump control, as well as LED control (which the device also supports for 9 addressable RGB LEDs on the CPU water block) are left for existing and already mature user-space tools, which can still be used alongside the driver, thanks to hidraw. A link to one, which I also maintain, is provided in the documentation. The implementation is based on USB traffic analysis. It has been runtime tested on x86_64, both as a built-in driver and as a module. Signed-off-by: Jonas Malaco <jonas@protocubo.io> Link: https://lore.kernel.org/r/20210319045544.416138-1-jonas@protocubo.io [groeck: Removed unnecessary spinlock.h include] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (ina2xx) Convert sysfs sprintf/snprintf family to sysfs_emitZihao Tang
Fix the following coccicheck warning: drivers/hwmon/ina2xx.c:313:8-16: WARNING: use scnprintf or sprintf drivers/hwmon/ina2xx.c:453:8-16: WARNING: use scnprintf or sprintf drivers/hwmon/ina2xx.c:484:8-16: WARNING: use scnprintf or sprintf drivers/hwmon/ina2xx.c:540:8-16: WARNING: use scnprintf or sprintf Signed-off-by: Zihao Tang <tangzihao1@hisilicon.com> Signed-off-by: Jay Fang <f.fangjian@huawei.com> Link: https://lore.kernel.org/r/1615892457-35501-1-git-send-email-f.fangjian@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: Use kobj_to_dev()Guenter Roeck
coccinelle complains about WARNING opportunity for kobj_to_dev() in several files, resulting in one-by-one patch submissions. Handle all remaining instances in one go. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (ds1621) Use kobj_to_dev()Tian Tao
fixed the following coccicheck: ./drivers/hwmon/ds1621.c:329:60-61: WARNING opportunity for kobj_to_dev(). Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Link: https://lore.kernel.org/r/1616032504-59817-1-git-send-email-tiantao6@hisilicon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (ftsteutates) Fix spelling typozuoqilin
Change 'revsion' to 'revision'. Signed-off-by: zuoqilin <zuoqilin@yulong.com> Link: https://lore.kernel.org/r/20210318124637.1331-1-zuoqilin1@163.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (corsair-psu) add support for critical valuesWilken Gottwalt
Adds support for reading the critical values of the temperature sensors and the rail sensors (voltage and current) once and caches them. Updates the naming of the constants following a more clear scheme. Also updates the documentation and fixes some typos. Updates is_visible and ops_read functions to be more readable. The new sensors output of a Corsair HX850i will look like this: corsairpsu-hid-3-1 Adapter: HID adapter v_in: 230.00 V v_out +12v: 12.14 V (crit min = +8.41 V, crit max = +15.59 V) v_out +5v: 5.03 V (crit min = +3.50 V, crit max = +6.50 V) v_out +3.3v: 3.30 V (crit min = +2.31 V, crit max = +4.30 V) psu fan: 0 RPM vrm temp: +46.2°C (crit = +70.0°C) case temp: +39.8°C (crit = +70.0°C) power total: 152.00 W power +12v: 108.00 W power +5v: 41.00 W power +3.3v: 5.00 W curr +12v: 9.00 A (crit max = +85.00 A) curr +5v: 8.31 A (crit max = +40.00 A) curr +3.3v: 1.62 A (crit max = +40.00 A) Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> Link: https://lore.kernel.org/r/YFNg6vGk3sQmyqgB@monster.powergraphx.local Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (pmbus/stpddc60) Add ST STPDDC60 pmbus driverErik Rosen
Add hardware monitoring support for ST STPDDC60 Unversal Digital Multicell Controller. Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Link: https://lore.kernel.org/r/20210218115249.28513-3-erik.rosen@metormote.com [groeck: Fixed whitespace error in Makefile] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (pmbus) Add pmbus_set_update() function to set update flagErik Rosen
For the STPDDC60 chip, the vout alarm-limits are represented as an offset relative to the commanded output voltage. This means that the limits are dynamic and must not be cached by the pmbus driver. This patch adds a pmbus_set_sensor() function to pmbus_core to be able to set the update flag on selected sensors after auto-detection of limit attributes. Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Link: https://lore.kernel.org/r/20210218115249.28513-2-erik.rosen@metormote.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (nct6683) Support NCT6686DJiqi Li
Add support for NCT6686D chip used in the Lenovo P620. Signed-off-by: Jiqi Li <lijq9@lenovo.com> Reviewed-by: Mark Pearson <markpearson@lenovo.com> Link: https://lore.kernel.org/r/20210304104421.1912934-1-lijq9@lenovo.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (pmbus) Add driver for Infineon IR36021Chris Packham
The IR36021 is a dual‐loop digital multi‐phase buck controller. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20210301035954.16713-3-chris.packham@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20dt-bindings: trivial-devices: Add infineon,ir36021Chris Packham
Add infineon,ir36021 to trivial-devices.yaml. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210301035954.16713-2-chris.packham@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (corsair-psu) Update calculation of LINEAR11 valuesWilken Gottwalt
Changes the way how LINEAR11 values are calculated. The new method increases the precision of 2-3 digits. old method: corsairpsu-hid-3-1 Adapter: HID adapter v_in: 230.00 V v_out +12v: 12.00 V v_out +5v: 5.00 V v_out +3.3v: 3.00 V psu fan: 0 RPM vrm temp: +44.0°C case temp: +37.0°C power total: 152.00 W power +12v: 112.00 W power +5v: 38.00 W power +3.3v: 5.00 W curr in: N/A curr +12v: 9.00 A curr +5v: 7.00 A curr +3.3v: 1000.00 mA new method: corsairpsu-hid-3-1 Adapter: HID adapter v_in: 230.00 V v_out +12v: 12.16 V v_out +5v: 5.01 V v_out +3.3v: 3.30 V psu fan: 0 RPM vrm temp: +44.5°C case temp: +37.8°C power total: 148.00 W power +12v: 108.00 W power +5v: 37.00 W power +3.3v: 4.50 W curr in: N/A curr +12v: 9.25 A curr +5v: 7.50 A curr +3.3v: 1.50 A Co-developed-by: Jack Doan <me@jackdoan.com> Signed-off-by: Jack Doan <me@jackdoan.com> Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> Link: https://lore.kernel.org/r/YDoSMqFbgoTXyoru@monster.powergraphx.local Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: Switch to using the new API kobj_to_dev()Yang Li
fixed the following coccicheck: ./drivers/hwmon/hwmon.c:82:60-61: WARNING opportunity for kobj_to_dev() Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1614071667-5665-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (adm9240) Convert to devm_hwmon_device_register_with_info APIGuenter Roeck
Also use regmap for register caching. This change reduces code and data size by more than 40%. While at it, fixed some warnings reported by checkpatch. Cc: Chris Packham <Chris.Packham@alliedtelesis.co.nz> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (adm9240) Store i2c device instead of client in local dataGuenter Roeck
We only use the pointer to i2c_client to access &client->dev. Store the device pointer directly instead of retrieving it from i2c_client. Cc: Chris Packham <Chris.Packham@alliedtelesis.co.nz> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (adm9240) Drop log messages from detect functionGuenter Roeck
Not detecting a chip in the detect function is normal and should not generate any log messages, much less error messages. Cc: Chris Packham <Chris.Packham@alliedtelesis.co.nz> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20Merge tag 'gvt-fixes-2021-04-20' of https://github.com/intel/gvt-linux into ↵Rodrigo Vivi
drm-intel-fixes gvt-fixes-2021-04-20 - Fix cmd parser regression on BDW (Zhenyu) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210420023312.GL1551@zhen-hp.sh.intel.com
2021-04-20s390/pci: expose a PCI device's UID as its indexNiklas Schnelle
On s390 each PCI device has a user-defined ID (UID) exposed under /sys/bus/pci/devices/<dev>/uid. This ID was designed to serve as the PCI device's primary index and to match the device within Linux to the device configured in the hypervisor. To serve as a primary identifier the UID must be unique within the Linux instance, this is guaranteed by the platform if and only if the UID Uniqueness Checking flag is set within the CLP List PCI Functions response. In this sense the UID serves an analogous function as the SMBIOS instance number or ACPI index exposed as the "index" respectively "acpi_index" device attributes and used by e.g. systemd to set interface names. As s390 does not use and will likely never use ACPI nor SMBIOS there is no conflict and we can just expose the UID under the "index" attribute whenever UID Uniqueness Checking is active and get systemd's interface naming support for free. Link: https://lore.kernel.org/lkml/20210412135905.1434249-1-schnelle@linux.ibm.com/ Acked-by: Viktor Mihajlovski <mihajlov@linux.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Narendra K <narendra_k@dell.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-04-20spi: stm32-qspi: Fix compilation warning in ARM64Patrice Chotard
This fixes warnings detected when compiling in ARM64. Introduced by 'commit 18674dee3cd6 ("spi: stm32-qspi: Add dirmap support")' Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20210420082103.1693-1-patrice.chotard@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-20Merge tag 'bmc-5.13-devicetree-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt BMC device tree updates for 5.13, round two - Fixes to the first pull request for Rainier - Small changes for Rainier, EthanolX and Tiogapass * tag 'bmc-5.13-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: ARM: dts: aspeed: tiogapass: add hotplug controller ARM: dts: aspeed: amd-ethanolx: Enable all used I2C busses ARM: dts: aspeed: Rainier: Update to pass 2 hardware ARM: dts: aspeed: Rainier 1S4U: Fix fan nodes ARM: dts: aspeed: Rainier: Fix humidity sensor bus address ARM: dts: aspeed: Rainier: Fix PCA9552 on bus 8 Link: https://lore.kernel.org/r/CACPK8XeJdHmxyJn43Ju5hmxJ7+rJgHmx=ANFaL17YUmp+gOtJg@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-20x86/platform/uv: Remove dead !CONFIG_KEXEC_CORE codeIngo Molnar
The !CONFIG_KEXEC_CORE code in arch/x86/platform/uv/uv_nmi.c was unused, untested and didn't even build for 7 years. Since we fixed this by requiring X86_UV to depend on CONFIG_KEXEC_CORE, remove the (now) dead code. Also move the uv_nmi_kexec_failed definition back up to where the other file-scope global variables are defined. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Mike Travis <travis@sgi.com> Cc: linux-kernel@vger.kernel.org
2021-04-20x86/platform/uv: Fix !KEXEC build failureIngo Molnar
When KEXEC is disabled, the UV build fails: arch/x86/platform/uv/uv_nmi.c:875:14: error: ‘uv_nmi_kexec_failed’ undeclared (first use in this function) Since uv_nmi_kexec_failed is only defined in the KEXEC_CORE #ifdef branch, this code cannot ever have been build tested: if (main) pr_err("UV: NMI kdump: KEXEC not supported in this kernel\n"); atomic_set(&uv_nmi_kexec_failed, 1); Nor is this use possible in uv_handle_nmi(): atomic_set(&uv_nmi_kexec_failed, 0); These bugs were introduced in this commit: d0a9964e9873: ("x86/platform/uv: Implement simple dump failover if kdump fails") Which added the uv_nmi_kexec_failed assignments to !KEXEC code, while making the definition KEXEC-only - apparently without testing the !KEXEC case. Instead of complicating the #ifdef maze, simplify the code by requiring X86_UV to depend on KEXEC_CORE. This pattern is present in other architectures as well. ( We'll remove the untested, 7 years old !KEXEC complications from the file in a separate commit. ) Fixes: d0a9964e9873: ("x86/platform/uv: Implement simple dump failover if kdump fails") Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Mike Travis <travis@sgi.com> Cc: linux-kernel@vger.kernel.org
generated by cgit (git 2.34.1) at 2025-09-12 14:57:39 +0000