summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-02-06nvme: Add Support for Opal: Unlock from S3 & Opal Allocation/IoctlsScott Bauer
This patch implements the necessary logic to unlock an Opal enabled device coming back from an S3. The patch also implements the SED/Opal allocation necessary to support the opal ioctls. Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-06block: Add Sed-opal libraryScott Bauer
This patch implements the necessary logic to bring an Opal enabled drive out of a factory-enabled into a working Opal state. This patch set also enables logic to save a password to be replayed during a resume from suspend. Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Rafael Antognolli <Rafael.Antognolli@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-06Include: Uapi: Add user ABI for Sed/OpalScott Bauer
Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Rafael Antognolli <Rafael.Antognolli@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-06ipv6: Fix IPv6 packet loss in scenarios involving roaming + snooping switchesLinus Lüssing
When for instance a mobile Linux device roams from one access point to another with both APs sharing the same broadcast domain and a multicast snooping switch in between: 1) (c) <~~~> (AP1) <--[SSW]--> (AP2) 2) (AP1) <--[SSW]--> (AP2) <~~~> (c) Then currently IPv6 multicast packets will get lost for (c) until an MLD Querier sends its next query message. The packet loss occurs because upon roaming the Linux host so far stayed silent regarding MLD and the snooping switch will therefore be unaware of the multicast topology change for a while. This patch fixes this by always resending MLD reports when an interface change happens, for instance from NO-CARRIER to CARRIER state. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06ARM: defconfigs: make NF_CT_PROTO_SCTP and NF_CT_PROTO_UDPLITE built-inArnd Bergmann
The symbols can no longer be used as loadable modules, leading to a harmless Kconfig warning: arch/arm/configs/imote2_defconfig:60:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE arch/arm/configs/imote2_defconfig:59:warning: symbol value 'm' invalid for NF_CT_PROTO_SCTP arch/arm/configs/ezx_defconfig:68:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE arch/arm/configs/ezx_defconfig:67:warning: symbol value 'm' invalid for NF_CT_PROTO_SCTP Let's make them built-in. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-02-06block: don't try Write Same from __blkdev_issue_zerooutChristoph Hellwig
Write Same can return an error asynchronously if it turns out the underlying SCSI device does not support Write Same, which makes a proper fallback to other methods in __blkdev_issue_zeroout impossible. Thus only issue a Write Same from blkdev_issue_zeroout an don't try it at all from __blkdev_issue_zeroout as a non-invasive workaround. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Junichi Nomura <j-nomura@ce.jp.nec.com> Fixes: e73c23ff ("block: add async variant of blkdev_issue_zeroout") Tested-by: Junichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-06Merge tag 'mvebu-fixes-4.10-1' of git://git.infradead.org/linux-mvebu into fixesArnd Bergmann
Pull "mvebu fixes for 4.10 (part 1)" from Gregory CLEMENT: More consistent naming for some orion5x based boards helping the switch to device tree for debian users. * tag 'mvebu-fixes-4.10-1' of git://git.infradead.org/linux-mvebu: ARM: orion5x: fix Makefile for linkstation-lschl.dtb ARM: dts: orion5x-lschl: More consistent naming on linkstation series ARM: dts: orion5x-lschl: Fix model name
2017-02-06MAINTAINERS: socfpga: update email for Dinh NguyenDinh Nguyen
My opensource.altera.com email will be going away soon. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-02-06Merge tag 'wireless-drivers-for-davem-2017-02-06' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.10 Only one important fix for rtlwifi which fixes a regression introduced in 4.9 and which caused problems for many users. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06Merge tag 'mac80211-for-davem-2017-02-06' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A few simple fixes: * fix FILS AEAD cipher usage to use the correct AAD vectors and to use synchronous algorithms * fix using mesh HT operation data from userspace * fix adding mesh vendor elements to beacons & plink frames ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06ipv6: tcp: add a missing tcp_v6_restore_cb()Eric Dumazet
Dmitry reported use-after-free in ip6_datagram_recv_specific_ctl() A similar bug was fixed in commit 8ce48623f0cf ("ipv6: tcp: restore IP6CB for pktoptions skbs"), but I missed another spot. tcp_v6_syn_recv_sock() can indeed set np->pktoptions from ireq->pktopts Fixes: 971f10eca186 ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06ALSA: seq: Don't handle loop timeout at snd_seq_pool_done()Takashi Iwai
snd_seq_pool_done() syncs with closing of all opened threads, but it aborts the wait loop with a timeout, and proceeds to the release resource even if not all threads have been closed. The timeout was 5 seconds, and if you run a crazy stuff, it can exceed easily, and may result in the access of the invalid memory address -- this is what syzkaller detected in a bug report. As a fix, let the code graduate from naiveness, simply remove the loop timeout. BugLink: http://lkml.kernel.org/r/CACT4Y+YdhDV2H5LLzDTJDVF-qiYHUHhtRaW4rbb4gUhTCQB81w@mail.gmail.com Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-06Merge remote-tracking branch 'tip/perf/urgent' into perf/coreArnaldo Carvalho de Melo
To pick fixes that are affecting tests of new 'perf diff' features in perf/core. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-06Merge branches 'pm-core-fixes' and 'pm-cpufreq-fixes'Rafael J. Wysocki
* pm-core-fixes: PM / runtime: Avoid false-positive warnings from might_sleep_if() * pm-cpufreq-fixes: cpufreq: intel_pstate: Disable energy efficiency optimization cpufreq: brcmstb-avs-cpufreq: properly retrieve P-state upon suspend cpufreq: brcmstb-avs-cpufreq: extend sysfs entry brcm_avs_pmap
2017-02-06iommu: Fix static checker warning in iommu_insert_device_resv_regionsEric Auger
In case the device reserved region list is void, the returned value of iommu_insert_device_resv_regions is uninitialized. Let's return 0 in that case. This fixes commit 6c65fb318e8b ("iommu: iommu_get_group_resv_regions"). Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-02-06iommu: Avoid unnecessary assignment of dev->iommu_fwspecZhen Lei
Move the assignment statement into if branch above, where it only needs to be. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-02-06iommu/mediatek: Remove bogus 'select' statementsArnd Bergmann
The mediatek IOMMU driver enables some drivers that it does not directly rely on, and that causes a warning for build testing: warning: (MTK_IOMMU_V1) selects COMMON_CLK_MT2701_VDECSYS which has unmet direct dependencies (COMMON_CLK && COMMON_CLK_MT2701) warning: (MTK_IOMMU_V1) selects COMMON_CLK_MT2701_IMGSYS which has unmet direct dependencies (COMMON_CLK && COMMON_CLK_MT2701) warning: (MTK_IOMMU_V1) selects COMMON_CLK_MT2701_MMSYS which has unmet direct dependencies (COMMON_CLK && COMMON_CLK_MT2701) This removes the select statements. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-02-06iommu/dma: Remove bogus dma_supported() implementationRobin Murphy
Back when this was first written, dma_supported() was somewhat of a murky mess, with subtly different interpretations being relied upon in various places. The "does device X support DMA to address range Y?" uses assuming Y to be physical addresses, which motivated the current iommu_dma_supported() implementation and are alluded to in the comment therein, have since been cleaned up, leaving only the far less ambiguous "can device X drive address bits Y" usage internal to DMA API mask setting. As such, there is no reason to keep a slightly misleading callback which does nothing but duplicate the current default behaviour; we already constrain IOVA allocations to the iommu_domain aperture where necessary, so let's leave DMA mask business to architecture-specific code where it belongs. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-02-06iommu/ipmmu-vmsa: Restrict IOMMU Domain Geometry to 32-bit address spaceGeert Uytterhoeven
Currently, the IPMMU/VMSA driver supports 32-bit I/O Virtual Addresses only, and thus sets io_pgtable_cfg.ias = 32. However, it doesn't force a 32-bit IOVA space through the IOMMU Domain Geometry. Hence if a device (e.g. SYS-DMAC) rightfully configures a 40-bit DMA mask, it will still be handed out a 40-bit IOVA, outside the 32-bit IOVA space, leading to out-of-bounds accesses of the PGD when mapping the IOVA. Force a 32-bit IOMMU Domain Geometry to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-02-06mtd: nand: Add Winbond manufacturer idAndrey Jr. Melnikov
Add WINBOND manufacturer id. Signed-off-by: Andrey Jr. Melnikov <temnota.am@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-02-06pinctrl: sunxi: make sun5i explicitly non-modularPaul Gortmaker
We had all these corrected in commit 0c8c6ba00cbf ("pinctrl: sunxi: make bool drivers explicitly non-modular") but this new one recently crept in. The Kconfig currently controlling compilation of this code is: drivers/pinctrl/sunxi/Kconfig:config PINCTRL_SUN5I drivers/pinctrl/sunxi/Kconfig: def_bool MACH_SUN5I ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-06pinctrl: sunxi: Remove stray printk call in sun5i driver's probe functionChen-Yu Tsai
There is a stray printk call in the new sun5i pinctrl driver's probe function. Remove it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-06kprobes/x86: Use hlist_for_each_entry() instead of hlist_for_each_entry_safe()Masami Hiramatsu
Use hlist_for_each_entry() in the first loop in the kretprobe trampoline_handler() function, because it doesn't change the hlist. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/148637493309.19245.12546866092052500584.stgit@devbox Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-06kprobes/arm64: Remove a redundant dependency from the KconfigMasami Hiramatsu
Remove the 'HAVE_KPROBES' dependency from the HAVE_KRETPROBES line, since HAVE_KPROBES is already selected unconditionally in the Kconfig line above this one. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David A. Long <dave.long@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandeepa Prabhu <sandeepa.s.prabhu@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/148637486369.19245.316601692744886725.stgit@devbox Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-06pinctrl: samsung: mark PM functions as __maybe_unusedArnd Bergmann
The rework of the suspend/resume handling uses the wrong #ifdef check, leading to a build warning without CONFIG_PM_SLEEP: drivers/pinctrl/samsung/pinctrl-samsung.c:1142:12: error: 'samsung_pinctrl_resume' defined but not used [-Werror=unused-function] drivers/pinctrl/samsung/pinctrl-samsung.c:1092:12: error: 'samsung_pinctrl_suspend' defined but not used [-Werror=unused-function] Using a __maybe_unused annotation instead of the #ifdef is a simple way to avoid this problem class. Fixes: 2b24efa8e5c5 ("pinctrl: samsung: Replace syscore ops with standard platform device pm_ops") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-06pinctrl: sunxi: Remove redundant A31s pinctrl driverChen-Yu Tsai
Now that we can support the A31s pin controller with the A31 driver using the new variants support, the independent A31s driver becomes redundant. Remove it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-06pinctrl: sunxi: Support A31/A31s with pinctrl variantsChen-Yu Tsai
The A31s is a trimmed down version of the A31. Some hardware blocks are removed, thus not available for muxing on the external pins. Some external pins were directly removed. This makes it easy to support the A31s pin controller with the A31 driver. We just mark the pins and functions that were trimmed as A31 only. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-06Merge branch 'perf/urgent' into perf/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-06pinctrl: Amend bindings for STM32 pinctrlAlexandre TORGUE
Adds "ngpios" and "gpio-ranges" bindings definition. Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-06pinctrl: Add STM32 pinctrl driver DT bindingsAlexandre TORGUE
Add compatible sting for stm32h743 MCU. Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-06pinctrl: stm32: Add STM32H743 MCU supportAlexandre TORGUE
This patch adds STM32H743 pinctrl and GPIO support, relies on the generic STM32 pinctrl driver. Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-06include: dt-bindings: Add STM32H7 pinctrl DT definesAlexandre TORGUE
Adds common pinctrl device tree defines for STM32H743 and STM32H753 MCU. Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-06mtd: nand: sunxi: Improve sunxi_nfc_cmd_ctrl()Boris Brezillon
We only need to call sunxi_nfc_wait_cmd_fifo_empty() if we want to send a new command. Move the sunxi_nfc_wait_cmd_fifo_empty() call to right place to avoid extra register reads. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-02-06mtd: nand: sunxi: Stop using polling mode when waiting for long operationsBoris Brezillon
Some operations, like read/write an entire page of data with the ECC engine enabled, are known to take a lot of time. Use the interrupt-based waiting mode in these situation. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-02-06mtd: nand: sunxi: Fix the non-polling case in sunxi_nfc_wait_events()Boris Brezillon
wait_for_completion_timeout() returns 0 if a timeout occurred, 1 otherwise. Fix the sunxi_nfc_wait_events() accordingly. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-02-06mtd: nand: ifc: Fix location of eccstat registers for IFC V1.0Mark Marshall
The commit 7a654172161c ("mtd/ifc: Add support for IFC controller version 2.0") added support for version 2.0 of the IFC controller. The version 2.0 controller has the ECC status registers at a different location to the previous versions. Correct the fsl_ifc_nand structure so that the ECC status can be read from the correct location for both version 1.0 and 2.0 of the controller. Cc: stable@vger.kernel.org Fixes: 7a654172161c ("mtd/ifc: Add support for IFC controller version 2.0") Signed-off-by: Mark Marshall <mark.marshall@omicronenergy.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-02-06nl80211: Fix mesh HT operation checkMasashi Honma
A previous change to fix checks for NL80211_MESHCONF_HT_OPMODE missed setting the flag when replacing FILL_IN_MESH_PARAM_IF_SET with checking codes. This results in dropping the received HT operation value when called by nl80211_update_mesh_config(). Fix this by setting the flag properly. Fixes: 9757235f451c ("nl80211: correct checks for NL80211_MESHCONF_HT_OPMODE value") Signed-off-by: Masashi Honma <masashi.honma@gmail.com> [rewrite commit message to use Fixes: line] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-02-06mac80211: Fix adding of mesh vendor IEsThorsten Horstmann
The function ieee80211_ie_split_vendor doesn't return 0 on errors. Instead it returns any offset < ielen when WLAN_EID_VENDOR_SPECIFIC is found. The return value in mesh_add_vendor_ies must therefore be checked against ifmsh->ie_len and not 0. Otherwise all ifmsh->ie starting with WLAN_EID_VENDOR_SPECIFIC will be rejected. Fixes: 082ebb0c258d ("mac80211: fix mesh beacon format") Signed-off-by: Thorsten Horstmann <thorsten@defutech.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fit.fraunhofer.de> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> [sven@narfation.org: Add commit message] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-02-06mac80211: Allocate a sync skcipher explicitly for FILS AEADJouni Malinen
The skcipher could have been of the async variant which may return from skcipher_encrypt() with -EINPROGRESS after having queued the request. The FILS AEAD implementation here does not have code for dealing with that possibility, so allocate a sync cipher explicitly to avoid potential issues with hardware accelerators. This is based on the patch sent out by Ard. Fixes: 39404feee691 ("mac80211: FILS AEAD protection for station mode association frames") Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-02-06mac80211: Fix FILS AEAD protection in Association Request frameJouni Malinen
Incorrect num_elem parameter value (1 vs. 5) was used in the aes_siv_encrypt() call. This resulted in only the first one of the five AAD vectors to SIV getting included in calculation. This does not protect all the contents correctly and would not interoperate with a standard compliant implementation. Fix this by using the correct number. A matching fix is needed in the AP side (hostapd) to get FILS authentication working properly. Fixes: 39404feee691 ("mac80211: FILS AEAD protection for station mode association frames") Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-02-05ext4: add EXT4_IOC_GOINGDOWN ioctlTheodore Ts'o
This ioctl is modeled after the xfs's XFS_IOC_GOINGDOWN ioctl. (In fact, it uses the same code points.) Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-02-05Linux 4.10-rc7v4.10-rc7Linus Torvalds
2017-02-05ip6_gre: fix ip6gre_err() invalid readsEric Dumazet
Andrey Konovalov reported out of bound accesses in ip6gre_err() If GRE flags contains GRE_KEY, the following expression *(((__be32 *)p) + (grehlen / 4) - 1) accesses data ~40 bytes after the expected point, since grehlen includes the size of IPv6 headers. Let's use a "struct gre_base_hdr *greh" pointer to make this code more readable. p[1] becomes greh->protocol. grhlen is the GRE header length. Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-05regulator: core: have regulator_dev_lookup() return ERR_PTR-encoded errorsDmitry Torokhov
Instead of returning both regulator_dev structure as return value and auxiliary error code in 'ret' argument, let's switch to using ERR_PTR encoded values. This makes it more obvious what is going on at call sites. Also, let's not unlock the mutex in the middle of a loop, but rather break out and have single unlock path. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-05debugobjects: Reduce contention on the global pool_lockWaiman Long
On a large SMP system with many CPUs, the global pool_lock may become a performance bottleneck as all the CPUs that need to allocate or free debug objects have to take the lock. That can sometimes cause soft lockups like: NMI watchdog: BUG: soft lockup - CPU#35 stuck for 22s! [rcuos/1:21] ... RIP: 0010:[<ffffffff817c216b>] [<ffffffff817c216b>] _raw_spin_unlock_irqrestore+0x3b/0x60 ... Call Trace: [<ffffffff813f40d1>] free_object+0x81/0xb0 [<ffffffff813f4f33>] debug_check_no_obj_freed+0x193/0x220 [<ffffffff81101a59>] ? trace_hardirqs_on_caller+0xf9/0x1c0 [<ffffffff81284996>] ? file_free_rcu+0x36/0x60 [<ffffffff81251712>] kmem_cache_free+0xd2/0x380 [<ffffffff81284960>] ? fput+0x90/0x90 [<ffffffff81284996>] file_free_rcu+0x36/0x60 [<ffffffff81124c23>] rcu_nocb_kthread+0x1b3/0x550 [<ffffffff81124b71>] ? rcu_nocb_kthread+0x101/0x550 [<ffffffff81124a70>] ? sync_exp_work_done.constprop.63+0x50/0x50 [<ffffffff810c59d1>] kthread+0x101/0x120 [<ffffffff81101a59>] ? trace_hardirqs_on_caller+0xf9/0x1c0 [<ffffffff817c2d32>] ret_from_fork+0x22/0x50 To reduce the amount of contention on the pool_lock, the actual kmem_cache_free() of the debug objects will be delayed if the pool_lock is busy. This will temporarily increase the amount of free objects available at the free pool when the system is busy. As a result, the number of kmem_cache allocation and freeing is reduced. To further reduce the lock operations free debug objects in batches of four. Signed-off-by: Waiman Long <longman@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: "Du Changbin" <changbin.du@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jan Stancek <jstancek@redhat.com> Link: http://lkml.kernel.org/r/1483647425-4135-4-git-send-email-longman@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-05x86/CPU/AMD: Fix Zen SMT topologyYazen Ghannam
After: a33d331761bc ("x86/CPU/AMD: Fix Bulldozer topology") our SMT scheduling topology for Fam17h systems is broken, because the ThreadId is included in the ApicId when SMT is enabled. So, without further decoding cpu_core_id is unique for each thread rather than the same for threads on the same core. This didn't affect systems with SMT disabled. Make cpu_core_id be what it is defined to be. Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> # 4.9 Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170205105022.8705-2-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-05x86/CPU/AMD: Bring back Compute Unit IDBorislav Petkov
Commit: a33d331761bc ("x86/CPU/AMD: Fix Bulldozer topology") restored the initial approach we had with the Fam15h topology of enumerating CU (Compute Unit) threads as cores. And this is still correct - they're beefier than HT threads but still have some shared functionality. Our current approach has a problem with the Mad Max Steam game, for example. Yves Dionne reported a certain "choppiness" while playing on v4.9.5. That problem stems most likely from the fact that the CU threads share resources within one CU and when we schedule to a thread of a different compute unit, this incurs latency due to migrating the working set to a different CU through the caches. When the thread siblings mask mirrors that aspect of the CUs and threads, the scheduler pays attention to it and tries to schedule within one CU first. Which takes care of the latency, of course. Reported-by: Yves Dionne <yves.dionne@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> # 4.9 Cc: Brice Goglin <Brice.Goglin@inria.fr> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yazen Ghannam <yazen.ghannam@amd.com> Link: http://lkml.kernel.org/r/20170205105022.8705-1-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-05dmaengine: sun6i: allow build on ARM64 platforms (sun50i)Icenowy Zheng
As 64-bit Allwinner H5 SoC has the same DMA engine with H3, the DMA driver should be allowed to be built for ARM64, in order to make it work on H5. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-02-05ext4: add shutdown bit and check for itTheodore Ts'o
Add a shutdown bit that will cause ext4 processing to fail immediately with EIO. Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-02-05ext4: rename s_resize_flags to s_ext4_flagsTheodore Ts'o
We are currently using one bit in s_resize_flags; rename it in order to allow more of the bits in that unsigned long for other purposes. Signed-off-by: Theodore Ts'o <tytso@mit.edu>
generated by cgit (git 2.34.1) at 2025-10-01 23:11:18 +0000