summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-05-21tools: ynl: enable codegen for TCJakub Kicinski
We are ready to support most of TC. Enable C code gen. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250520161916.413298-11-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-21tools: ynl-gen: support weird sub-message formatsJakub Kicinski
TC uses all possible sub-message formats: - nested attrs - fixed headers + nested attrs - fixed headers - empty Nested attrs are already supported for rt-link. Add support for remaining 3. The empty and fixed headers ones are fairly trivial, we can fake a Binary or Flags type instead of a Nest. For fixed headers + nest we need to teach nest parsing and nest put to handle fixed headers. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250520161916.413298-10-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-21tools: ynl-gen: support local attrs in _multi_parseJakub Kicinski
The _multi_parse() helper calls the _attr_get() method of each attr, but it only respects what code the helper wants to emit, not what local variables it needs. Local variables will soon be needed, support them. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250520161916.413298-9-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-21tools: ynl-gen: move fixed header info from RenderInfo to StructJakub Kicinski
RenderInfo describes a request-response exchange. Struct describes a parsed attribute set. For ease of parsing sub-messages with fixed headers move fixed header info from RenderInfo to Struct. No functional changes. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250520161916.413298-8-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-21tools: ynl-gen: support passing selector to a nestJakub Kicinski
In rtnetlink all submessages had the selector at the same level of nesting as the submessage. We could refer to the relevant attribute from the current struct. In TC, stats are one level of nesting deeper than "kind". Teach the code-gen about structs which need to be passed a selector by the caller for parsing. Because structs are "topologically sorted" one pass of propagating the selectors down is enough. For generating netlink message we depend on the presence bits so no selector passing needed there. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250520161916.413298-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-21netlink: specs: tc: drop the family name prefix from attrsJakub Kicinski
All attribute sets and messages are prefixed with tc-. The C codegen also adds the family name to all structs. We end up with names like struct tc_tc_act_attrs. Remove the tc- prefixes to shorten the names. This should not impact Python as the attr set names are never exposed to user, they are only used to refer to things internally, in the encoder / decoder. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250520161916.413298-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-21netlink: specs: tc: add C naming infoJakub Kicinski
Add naming info needed by C code gen. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250520161916.413298-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-21netlink: specs: tc: use tc-gact instead of tc-gen as struct nameJakub Kicinski
There is a define in the uAPI header called tc_gen which expands to the "generic" TC action fields. This helps other actions include the base fields without having to deal with nested structs. A couple of actions (sample, gact) do not define extra fields, so the spec used a common tc-gen struct for both of them. Unfortunately this struct does not exist in C. Let's use gact's (generic act's) struct for basic actions. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250520161916.413298-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-21netlink: specs: tc: remove duplicate nestsJakub Kicinski
tc-act-stats-attrs and tca-stats-attrs are almost identical. The only difference is that the latter has sub-message decoding for app, rather than declaring it as a binary attr. tc-act-police-attrs and tc-police-attrs are identical but for the TODO annotations. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250520161916.413298-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-21tools: ynl-gen: add makefile deps for neighJakub Kicinski
Kory is reporting build issues after recent additions to YNL if the system headers are old. Link: https://lore.kernel.org/20250519164949.597d6e92@kmaincent-XPS-13-7390 Reported-by: Kory Maincent <kory.maincent@bootlin.com> Fixes: 0939a418b3b0 ("tools: ynl: submsg: reverse parse / error reporting") Tested-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20250520161916.413298-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-21Bluetooth: separate CIS_LINK and BIS_LINK link typesPauli Virtanen
Use separate link type id for unicast and broadcast ISO connections. These connection types are handled with separate HCI commands, socket API is different, and hci_conn has union fields that are different in the two cases, so they shall not be mixed up. Currently in most places it is attempted to distinguish ucast by bacmp(&c->dst, BDADDR_ANY) but it is wrong as dst is set for bcast sink hci_conn in iso_conn_ready(). Additionally checking sync_handle might be OK, but depends on details of bcast conn configuration flow. To avoid complicating it, use separate link types. Fixes: f764a6c2c1e4 ("Bluetooth: ISO: Add broadcast support") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Bluetooth: btusb: Add new VID/PID 13d3/3630 for MT7925Jiande Lu
Add VID 13d3 & PID 3630 for MediaTek MT7925 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=07 Lev=01 Prnt=01 Port=10 Cnt=02 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3630 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Jiande Lu <jiande.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Bluetooth: add support for SIOCETHTOOL ETHTOOL_GET_TS_INFOPauli Virtanen
Bluetooth needs some way for user to get supported so_timestamping flags for the different socket types. Use SIOCETHTOOL API for this purpose. As hci_dev is not associated with struct net_device, the existing implementation can't be reused, so we add a small one here. Add support (only) for ETHTOOL_GET_TS_INFO command. The API differs slightly from netdev in that the result depends also on socket type. Signed-off-by: Pauli Virtanen <pav@iki.fi> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Bluetooth: btintel_pcie: Dump debug registers on errorChandrashekar Devegowda
Dumping debug registers on GP1 MSIx and error conditions, such as TX completion timeout, aiding in understanding the controller's state during errors. The register dump includes: - Boot stage - IPC control - IPC status - Mailbox registers HCI traces: = Vendor Diagnostic (len 199) 2d 2d 2d 2d 20 44 75 6d 70 20 6f 66 20 64 65 62 ---- Dump of deb 75 67 20 72 65 67 69 73 74 65 72 73 20 2d 2d 2d ug registers --- 62 6f 6f 74 20 73 74 61 67 65 3a 20 30 78 61 30 boot stage: 0xa0 66 61 30 30 34 37 69 70 63 20 73 74 61 74 75 73 fa0047ipc status 3a 20 30 78 30 30 30 30 30 30 30 34 69 70 63 20 : 0x00000004ipc 63 6f 6e 74 72 6f 6c 3a 20 30 78 30 30 30 30 30 control: 0x00000 30 30 30 69 70 63 20 73 6c 65 65 70 20 63 6f 6e 000ipc sleep con 74 72 6f 6c 3a 20 30 78 30 30 30 30 30 30 30 30 trol: 0x00000000 6d 62 6f 78 20 73 74 61 74 75 73 3a 20 30 78 30 mbox status: 0x0 30 30 30 30 30 30 30 72 78 71 3a 20 63 72 5f 74 0000000rxq: cr_t 69 61 3a 20 37 20 63 72 5f 68 69 61 3a 20 37 74 ia: 7 cr_hia: 7t 78 71 3a 20 63 72 5f 74 69 61 3a 20 36 20 63 72 xq: cr_tia: 6 cr 5f 68 69 61 3a 20 36 _hia: 6 Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Bluetooth: ISO: Fix getpeername not returning sockaddr_iso_bc fieldsLuiz Augusto von Dentz
If the socket is a broadcast receiver fields from sockaddr_iso_bc shall be part of the values returned to getpeername since some of these fields are updated while doing the PA and BIG sync procedures. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Bluetooth: ISO: Fix not using SID from adv reportLuiz Augusto von Dentz
Up until now it has been assumed that the application would be able to enter the advertising SID in sockaddr_iso_bc.bc_sid, but userspace has no access to SID since the likes of MGMT_EV_DEVICE_FOUND cannot carry it, so it was left unset (0x00) which means it would be unable to synchronize if the broadcast source is using a different SID e.g. 0x04: > HCI Event: LE Meta Event (0x3e) plen 57 LE Extended Advertising Report (0x0d) Num reports: 1 Entry 0 Event type: 0x0000 Props: 0x0000 Data status: Complete Address type: Random (0x01) Address: 0B:82:E8:50:6D:C8 (Non-Resolvable) Primary PHY: LE 1M Secondary PHY: LE 2M SID: 0x04 TX power: 127 dBm RSSI: -55 dBm (0xc9) Periodic advertising interval: 180.00 msec (0x0090) Direct address type: Public (0x00) Direct address: 00:00:00:00:00:00 (OUI 00-00-00) Data length: 0x1f 06 16 52 18 5b 0b e1 05 16 56 18 04 00 11 30 4c ..R.[....V....0L 75 69 7a 27 73 20 53 32 33 20 55 6c 74 72 61 uiz's S23 Ultra Service Data: Broadcast Audio Announcement (0x1852) Broadcast ID: 14748507 (0xe10b5b) Service Data: Public Broadcast Announcement (0x1856) Data[2]: 0400 Unknown EIR field 0x30[16]: 4c75697a27732053323320556c747261 < HCI Command: LE Periodic Advertising Create Sync (0x08|0x0044) plen 14 Options: 0x0000 Use advertising SID, Advertiser Address Type and address Reporting initially enabled SID: 0x00 (<- Invalid) Adv address type: Random (0x01) Adv address: 0B:82:E8:50:6D:C8 (Non-Resolvable) Skip: 0x0000 Sync timeout: 20000 msec (0x07d0) Sync CTE type: 0x0000 So instead this changes now allow application to set HCI_SID_INVALID which will make hci_le_pa_create_sync to wait for a report, update the conn->sid using the report SID and only then issue PA create sync command: < HCI Command: LE Periodic Advertising Create Sync Options: 0x0000 Use advertising SID, Advertiser Address Type and address Reporting initially enabled SID: 0x04 Adv address type: Random (0x01) Adv address: 0B:82:E8:50:6D:C8 (Non-Resolvable) Skip: 0x0000 Sync timeout: 20000 msec (0x07d0) Sync CTE type: 0x0000 > HCI Event: LE Meta Event (0x3e) plen 16 LE Periodic Advertising Sync Established (0x0e) Status: Success (0x00) Sync handle: 64 Advertising SID: 0x04 Advertiser address type: Random (0x01) Advertiser address: 0B:82:E8:50:6D:C8 (Non-Resolvable) Advertiser PHY: LE 2M (0x02) Periodic advertising interval: 180.00 msec (0x0090) Advertiser clock accuracy: 0x05 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Revert "Bluetooth: btusb: add sysfs attribute to control USB alt setting"Hsin-chen Chuang
This reverts commit b16b327edb4d030fb4c8fe38c7d299074d47ee3f. The sysfs node introduced by this patch could potentially race with user space. The original motivation - Support configuring altsetting from the user space will be added by another series. Cc: chromeos-bluetooth-upstreaming@chromium.org Signed-off-by: Hsin-chen Chuang <chharry@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Revert "Bluetooth: btusb: Configure altsetting for HCI_USER_CHANNEL"Hsin-chen Chuang
This reverts commit 75ddcd5ad40ecd9fbc9f5a7a2ed0e1e74921db3c. This patch doesn't work quite well - It's observed that with this patch HFP is flaky on most of the existing USB Bluetooth controllers: Intel chips sometimes send out no packet for Transparent codec; MTK chips may generate SCO data with a wrong handle for CVSD codec; RTK could split the data with a wrong packet size for Transparent codec; ... etc. Cc: chromeos-bluetooth-upstreaming@chromium.org Signed-off-by: Hsin-chen Chuang <chharry@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Bluetooth: btusb: Add HCI Drv commands for configuring altsettingHsin-chen Chuang
Although commit 75ddcd5ad40e ("Bluetooth: btusb: Configure altsetting for HCI_USER_CHANNEL") has enabled the HCI_USER_CHANNEL user to send out SCO data through USB Bluetooth chips, it's observed that with the patch HFP is flaky on most of the existing USB Bluetooth controllers: Intel chips sometimes send out no packet for Transparent codec; MTK chips may generate SCO data with a wrong handle for CVSD codec; RTK could split the data with a wrong packet size for Transparent codec; ... etc. To address the issue above one needs to reset the altsetting back to zero when there is no active SCO connection, which is the same as the BlueZ behavior, and another benefit is the bus doesn't need to reserve bandwidth when no SCO connection. This patch adds "Supported Altsettings" and "Switch Altsetting" commands that allow the user space program to configure the altsetting freely. This patch is tested on ChromeOS devices. The USB Bluetooth models (CVSD, TRANS alt3, and TRANS alt6) could pass the stress HFP test narrow band speech and wide band speech. Cc: chromeos-bluetooth-upstreaming@chromium.org Fixes: b16b327edb4d ("Bluetooth: btusb: add sysfs attribute to control USB alt setting") Signed-off-by: Hsin-chen Chuang <chharry@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Bluetooth: Introduce HCI Driver protocolHsin-chen Chuang
Although commit 75ddcd5ad40e ("Bluetooth: btusb: Configure altsetting for HCI_USER_CHANNEL") has enabled the HCI_USER_CHANNEL user to send out SCO data through USB Bluetooth chips, it's observed that with the patch HFP is flaky on most of the existing USB Bluetooth controllers: Intel chips sometimes send out no packet for Transparent codec; MTK chips may generate SCO data with a wrong handle for CVSD codec; RTK could split the data with a wrong packet size for Transparent codec; ... etc. To address the issue above one needs to reset the altsetting back to zero when there is no active SCO connection, which is the same as the BlueZ behavior, and another benefit is the bus doesn't need to reserve bandwidth when no SCO connection. This patch adds the infrastructure that allow the user space program to talk to Bluetooth drivers directly: - Define the new packet type HCI_DRV_PKT which is specifically used for communication between the user space program and the Bluetooth drviers - hci_send_frame intercepts the packets and invokes drivers' HCI Drv callbacks (so far only defined for btusb) - 2 kinds of events to user space: Command Status and Command Complete, the former simply returns the status while the later may contain additional response data. Cc: chromeos-bluetooth-upstreaming@chromium.org Fixes: b16b327edb4d ("Bluetooth: btusb: add sysfs attribute to control USB alt setting") Signed-off-by: Hsin-chen Chuang <chharry@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Bluetooth: btnxpuart: Implement host-wakeup featureNeeraj Sanjay Kale
This implements host wakeup feature by reading the device tree property wakeup-source and 'wakeup' interrupt, and nxp,wakeout-pin, and configuring it as a FALLING EDGE triggered interrupt. When host is suspended, a trigger from the WAKE_OUT pin of the controller wakes it up. To enable this feature, both device tree properties are needed to be defined. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21dt-bindings: net: bluetooth: nxp: Add support for host-wakeupNeeraj Sanjay Kale
Add support for host wakeup on interrupt. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Bluetooth: btusb: Add RTL8851BE device 0x0bda:0xb850WangYuli
The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below: T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=b850 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms Co-developed-by: Hao Li <lihao1@uniontech.com> Signed-off-by: Hao Li <lihao1@uniontech.com> Signed-off-by: WangYuli <wangyuli@uniontech.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Bluetooth: hci_uart: Remove unnecessary NULL check before release_firmware()Chen Ni
release_firmware() checks for NULL pointers internally. Remove unneeded NULL check for fmw here. Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Bluetooth: btmtksdio: Fix wakeup source leaks on device unbindKrzysztof Kozlowski
Device can be unbound or probe can fail, so driver must also release memory for the wakeup source. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Bluetooth: btmrvl_sdio: Fix wakeup source leaks on device unbindKrzysztof Kozlowski
Device can be unbound or probe can fail, so driver must also release memory for the wakeup source. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Bluetooth: btintel_pcie: Do not generate coredump for diagnostic eventsKiran K
All Intel diagnostic events are part of HCI traces and there is no need to generate coredump for the same. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Bluetooth: btusb: Add new VID/PID 13d3/3613 for MT7925Youn MÉLOIS
Add VID 13d3 & PID 3613 for MediaTek MT7925 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3613 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Youn Melois <youn@melois.dev> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21wifi: mt76: mt7996: remove duplicate check in mt7996_mcu_sta_mld_setup_tlv()Dan Carpenter
The "msta_link" pointer has two NULL checks. Delete the second check. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/fde7246b-08a2-4c2f-b2dc-c3fd0e6b300b@stanley.mountain Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21Revert "wifi: mt76: Check link_conf pointer in mt76_connac_mcu_sta_basic_tlv()"Lorenzo Bianconi
In mt76_connac_mcu_sta_basic_tlv() link_conf is always not NULL. Revert the commit '9890624c1b39 ("wifi: mt76: Check link_conf pointer in mt76_connac_mcu_sta_basic_tlv()")' in order to fix the following warning: drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c:394 mt76_connac_mcu_sta_basic_tlv() warn: variable dereferenced before check 'link_conf' This reverts commit 9890624c1b3948c1c7f1d0e19ef0bb7680b8c80d. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250325-mt76_connac_mcu_sta_basic_tlv-link_conf-revert-v1-1-b84efefb74ee@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: fix uninitialized symbol warningsunliming
Fix below smatch warnings: drivers/net/wireless/mediatek/mt76/mt7996/main.c:952 mt7996_mac_sta_add_links() error: uninitialized symbol 'err'. drivers/net/wireless/mediatek/mt76/mt7996/main.c:1133 mt7996_set_rts_threshold() error: uninitialized symbol 'ret'. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/r/202504101051.1ya4Z4va-lkp@intel.com/ Signed-off-by: sunliming <sunliming@kylinos.cn> Link: https://patch.msgid.link/20250419031528.2073892-1-sunliming@linux.dev Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: avoid null deref in mt7996_stop_phy()Qasim Ijaz
In mt7996_stop_phy() the mt7996_phy structure is dereferenced before the null sanity check which could lead to a null deref. Fix by moving the dereference operation after the sanity check. Fixes: 69d54ce7491d ("wifi: mt76: mt7996: switch to single multi-radio wiphy") Signed-off-by: Qasim Ijaz <qasdev00@gmail.com> Link: https://patch.msgid.link/20250421111344.11484-1-qasdev00@gmail.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: avoid NULL pointer dereference in mt7996_set_monitor()Qasim Ijaz
The function mt7996_set_monitor() dereferences phy before the NULL sanity check. Fix this to avoid NULL pointer dereference by moving the dereference after the check. Fixes: 69d54ce7491d ("wifi: mt76: mt7996: switch to single multi-radio wiphy") Signed-off-by: Qasim Ijaz <qasdev00@gmail.com> Link: https://patch.msgid.link/20250421112544.13430-1-qasdev00@gmail.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7921: add 160 MHz AP for mt7922 deviceSamuel Williams
This allows mt7922 in hostapd mode to transmit up to 1.4 Gbps. Signed-off-by: Samuel Williams <sam8641@gmail.com> Link: https://patch.msgid.link/20250511005316.1118961-1-sam8641@gmail.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7925: fix host interrupt register initializationMichael Lo
ensure proper interrupt handling and aligns with the hardware spec by updating the register offset for MT_WFDMA0_HOST_INT_ENA. Cc: stable@vger.kernel.org Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Michael Lo <michael.lo@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250509083512.455095-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7925: introduce thermal protectionLeon Yen
Add thermal protection to prevent the chip from possible overheating due to prolonged high traffic and adverse operating conditions. Signed-off-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250509082117.453819-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt76x2: Add support for LiteOn WN4516R,WN4519RHenk Vergonet
Adds support for: - LiteOn WN4516R - LiteOn WN4519R Both use: - A nonstandard USB connector - Mediatek chipset MT7600U - ASIC revision: 76320044 Disabled VHT support on ASIC revision 76320044: This fixes the 5G connectibity issue on LiteOn WN4519R module see https://github.com/openwrt/mt76/issues/971 And may also fix the 5G issues on the XBox One Wireless Adapter see https://github.com/openwrt/mt76/issues/200 I have looked at the FCC info related to the MT7632U chip as mentioned in here: https://github.com/openwrt/mt76/issues/459 These confirm the chipset does not support 'ac' mode and hence VHT should be turned of. Signed-off-by: Henk Vergonet <henk.vergonet@gmail.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250418143914.31384-1-henk.vergonet@gmail.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: Remove an unneeded local variable in mt76x02_dma_init()Christophe JAILLET
Remove 't' which is unneeded since commit f3950a414143 ("mt76: set txwi_size according to the driver value") This slightly simplifies the code. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://patch.msgid.link/e86d5602bdd8b6bd22258ee69536992f39470bf5.1744928865.git.christophe.jaillet@wanadoo.fr Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: prevent uninit return in mt7996_mac_sta_add_linksQasim Ijaz
If link_conf_dereference_protected() or mt7996_vif_link() or link_sta_dereference_protected() fail the code jumps to the error_unlink label and returns ret which is uninitialised. Fix this by setting err before jumping to error_unlink. Fixes: c7e4fc362443 ("wifi: mt76: mt7996: Update mt7996_mcu_add_sta to MLO support") Fixes: dd82a9e02c05 ("wifi: mt76: mt7996: Rely on mt7996_sta_link in sta_add/sta_remove callbacks") Signed-off-by: Qasim Ijaz <qasdev00@gmail.com> Link: https://patch.msgid.link/20250421110550.9839-1-qasdev00@gmail.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21Revert "wifi: mt76: mt7996: fill txd by host driver"Shayne Chen
This reverts commit 3b522cadedfe6e9e0e8193d7d4ab5aa8d0c73209. The MTK connac3 has introduced new hardware, SDO (Software Defined Offload), to offload the process of filling the TX descriptor. Initially, there were some issues, but after several fixes, it should now be stable, allowing us to revert this commit. Additionally, activating SDO is essential for the proper functioning of features like TX checksum offload. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250328022847.1612082-1-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: Add NULL check in mt7996_thermal_initCharles Han
devm_kasprintf() can return a NULL pointer on failure,but this returned value in mt7996_thermal_init() is not checked. Add NULL check in mt7996_thermal_init(), to handle kernel NULL pointer dereference error. Fixes: 69d54ce7491d ("wifi: mt76: mt7996: switch to single multi-radio wiphy") Signed-off-by: Charles Han <hanchunchao@inspur.com> Link: https://patch.msgid.link/20250407095551.32127-1-hanchunchao@inspur.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7925: add EHT preamble puncturingAllan Wang
Add mt7925 EHT preamble puncturing. Signed-off-by: Allan Wang <allan.wang@mediatek.com> Link: https://patch.msgid.link/20250401083525.2734333-1-allan.wang@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7925: Fix logical vs bitwise typoDan Carpenter
This was supposed to be & instead of &&. Fixes: f0317215b367 ("wifi: mt76: mt7925: add EHT control support based on the CLC data") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/d323a443-4e81-4064-8563-b62274b53ef4@stanley.mountain Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: rework radar HWRDD idxStanleyYP Wang
The definition of MT_RX_SEL (for rdd_rx_sel) is mixed with the definition of HWRDD idx. For example, MT_RX_SEL2 is for background HWRDD idx, not an option of rdd_rx_sel. Additionally, HWRDD idx does not exactly map to band idx for Connac 3 chips. So, add mt7996_get_rdd_idx as a helper function. Finally, remove some parts of the code inherited from the legacy chips. For instance, 1. rdd_state is used for single-band-dual-HWRDD chips (for 80+80), especially the 76xx series. 2. rdd_rx_sel is also used for single-band-dual-HWRDD chips rx_sel = 0 => RDD0 for WF0, RDD1 for WF2 rx_sel = 1 => RDD0 for WF1, RDD1 for WF3 Chip Variants | 5G rdd idx | Background rdd idx ---------------------------|----------------|------------------- MT7996 (except 205/255) | 1 | 2 MT7992 | 1 | 2 MT7990 | 1 | 2 Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Reviewed-by: Money Wang <money.wang@mediatek.com> Link: https://patch.msgid.link/20250320015926.3948672-1-StanleyYP.Wang@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7915: rework radar HWRDD idxStanleyYP Wang
The definition of MT_RX_SEL (for rdd_rx_sel) is mixed with the definition of HWRDD idx. For example, MT_RX_SEL2 is for background HWRDD idx, not an option of rdd_rx_sel. Therefore, add mt7915_get_rdd_idx as a helper function to get the HWRDD idx for each variants. Additionally, remove some parts of the code inherited from the legacy chips. For instance, 1. rdd_state is used for single-band-dual-HWRDD chips (for 80+80), especially the 76xx series. 2. rdd_rx_sel is also used for single-band-dual-HWRDD chips rx_sel = 0 => RDD0 for WF0, RDD1 for WF2 rx_sel = 1 => RDD0 for WF1, RDD1 for WF3 Chip Variants | 5G rdd idx(=bandidx)| Background rdd idx -------------------------------|---------------------|------------------- MT7915A | 0 | 2 MT7915D | 1 | 2 MT7916 2G + 5G (2T2R+1R) | 1 | 2 MT7916 2G + 5G (3T3R) | 1 | N/A MT7981 2G + 5G | 1 | N/A MT7986 2G + 5G (one adie DBDC) | 1 | N/A MT7986 5G (one adie) | 1 (bandidx=MT_BAND1)| N/A MT7986 2G + 5G (dual adie) | 1 | N/A Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250320015918.3948643-1-StanleyYP.Wang@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7915: set correct background radar capabilityStanleyYP Wang
Some of the variants do not support background radar, so add a helper to report background radar capability. For mt7916, only the variant of 5G 2T2R + 1R supports background radar. Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250320015909.3948612-1-StanleyYP.Wang@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: add PCI device id for mt7990Peter Chiu
Add PCI device IDs to enable support for mt7990 chipsets. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250409140750.724437-11-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: rework background radar check for mt7990StanleyYP Wang
The MT7990 comes in 2T2R and 3T3R variants, with only the 2T2R supporting background radar. Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250409140750.724437-10-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: connac: rework TX descriptor and TX free for mt7990Shayne Chen
Adjust the TX descriptor and TX free for updated hardware fields. This is a preliminary patch to support mt7990 chipset. Co-developed-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Co-developed-by: Benjamin Lin <benjamin-jw.lin@mediatek.com> Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com> Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250409140750.724437-9-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: adjust HW capabilities for mt7990Peter Chiu
This is a preliminary patch to support mt7990 chipset. Co-developed-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Co-developed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Link: https://patch.msgid.link/20250409140750.724437-8-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit (git 2.34.1) at 2025-09-11 14:50:40 +0000