summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-05-17Merge tag 'dmaengine-fix-6.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine fixes from Vinod Koul: "This has a bunch of idxd driver fixes, dmatest revert and bunch of smaller driver fixes: - a bunch of idxd potential mem leak fixes - dmatest revert for waiting for interrupt fix as that causes issue - a couple of ti k3 udma fixes for locking and cap_mask - mediatek deadlock fix and unused variable cleanup fix" * tag 'dmaengine-fix-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine: mediatek: drop unused variable dmaengine: fsl-edma: Fix return code for unhandled interrupts dmaengine: mediatek: Fix a possible deadlock error in mtk_cqdma_tx_status() dmaengine: idxd: Fix ->poll() return value dmaengine: idxd: Refactor remove call with idxd_cleanup() helper dmaengine: idxd: Add missing idxd cleanup to fix memory leak in remove call dmaengine: idxd: fix memory leak in error handling path of idxd_pci_probe dmaengine: idxd: fix memory leak in error handling path of idxd_alloc dmaengine: idxd: Add missing cleanups in cleanup internals dmaengine: idxd: Add missing cleanup for early error out in idxd_setup_internals dmaengine: idxd: fix memory leak in error handling path of idxd_setup_groups dmaengine: idxd: fix memory leak in error handling path of idxd_setup_engines dmaengine: idxd: fix memory leak in error handling path of idxd_setup_wqs dmaengine: ptdma: Move variable condition check to the first place and remove redundancy dmaengine: idxd: Fix allowing write() from different address spaces dmaengine: ti: k3-udma: Add missing locking dmaengine: ti: k3-udma: Use cap_mask directly from dma_device structure instead of a local copy dmaengine: Revert "dmaengine: dmatest: Fix dmatest waiting less when interrupted" dmaengine: idxd: cdev: Fix uninitialized use of sva in idxd_cdev_open
2025-05-17Merge tag 'phy-fixes-6.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy fixes from Vinod Koul: "A bunch of renesas fixes and few smaller fixes in other drivers: - Rensas fixes for unbind ole detection, irq, locking etc - tegra fixes for error handling at init and UTMI power states and stray unlock fix - rockchip missing assignment and pll output fixes - startfive usb host detection fixes" * tag 'phy-fixes-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: Fix error handling in tegra_xusb_port_init phy: renesas: rcar-gen3-usb2: Set timing registers only once phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power off phy: renesas: rcar-gen3-usb2: Lock around hardware registers and driver data phy: renesas: rcar-gen3-usb2: Move IRQ request in probe phy: renesas: rcar-gen3-usb2: Fix role detection on unbind/bind phy: tegra: xusb: remove a stray unlock phy: phy-rockchip-samsung-hdptx: Fix PHY PLL output 50.25MHz error phy: starfive: jh7110-usb: Fix USB 2.0 host occasional detection failure phy: rockchip-samsung-dcphy: Add missing assignment phy: can-transceiver: Re-instate "mux-states" property presence check phy: qcom-qmp-ufs: check for mode type for phy setting phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking
2025-05-17Merge tag 'soundwire-6.15-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire fix from Vinod Koul: - Fix for irq domain creation race in the core * tag 'soundwire-6.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: bus: Fix race on the creation of the IRQ domain
2025-05-17Merge tag 'mm-hotfixes-stable-2025-05-17-09-41' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull hotfixes from Andrew Morton: "Nine singleton hotfixes, all MM. Four are cc:stable" * tag 'mm-hotfixes-stable-2025-05-17-09-41' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm: userfaultfd: correct dirty flags set for both present and swap pte zsmalloc: don't underflow size calculation in zs_obj_write() mm/page_alloc: fix race condition in unaccepted memory handling mm/page_alloc: ensure try_alloc_pages() plays well with unaccepted memory MAINTAINERS: add mm GUP section mm/codetag: move tag retrieval back upfront in __free_pages() mm/memory: fix mapcount / refcount sanity check for mTHP reuse kernel/fork: only call untrack_pfn_clear() on VMAs duplicated for fork() mm: hugetlb: fix incorrect fallback for subpool
2025-05-17Merge tag 'irq-urgent-2025-05-17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc irqchip driver fixes from Ingo Molnar: - Remove the MSI_CHIP_FLAG_SET_ACK flag from 5 irqchip drivers that did not require it - Fix IRQ handling delays in the riscv-imsic irqchip driver * tag 'irq-urgent-2025-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/riscv-imsic: Start local sync timer on correct CPU irqchip: Drop MSI_CHIP_FLAG_SET_ACK from unsuspecting MSI drivers
2025-05-17Merge tag 'x86-urgent-2025-05-17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 fixes from Ingo Molnar: - Fix SEV-SNP kdump bugs - Update the email address of Alexey Makhalov in MAINTAINERS - Add the CPU feature flag for the Zen6 microarchitecture - Fix typo in system message * tag 'x86-urgent-2025-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Remove duplicated word in warning message x86/CPU/AMD: Add X86_FEATURE_ZEN6 x86/sev: Make sure pages are not skipped during kdump x86/sev: Do not touch VMSA pages during SNP guest memory kdump MAINTAINERS: Update Alexey Makhalov's email address x86/sev: Fix operator precedence in GHCB_MSR_VMPL_REQ_LEVEL macro
2025-05-17Merge tag 'perf-urgent-2025-05-17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 perf event fix from Ingo Molnar: "Fix PEBS-via-PT crash" * tag 'perf-urgent-2025-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Fix segfault with PEBS-via-PT with sample_freq
2025-05-17Merge tag 'loongarch-fixes-6.15-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Fix some bugs in kernel-fpu, cpu idle function, hibernation and uprobes" * tag 'loongarch-fixes-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: uprobes: Remove redundant code about resume_era LoongArch: uprobes: Remove user_{en,dis}able_single_step() LoongArch: Save and restore CSR.CNTC for hibernation LoongArch: Move __arch_cpu_idle() to .cpuidle.text section LoongArch: Fix MAX_REG_OFFSET calculation LoongArch: Prevent cond_resched() occurring within kernel-fpu
2025-05-17Merge tag 'i2c-for-6.15-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fix from Wolfram Sang: - designware: cleanup properly on probe failure * tag 'i2c-for-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: designware: Fix an error handling path in i2c_dw_pci_probe()
2025-05-17Merge tag 'i2c-host-fixes-6.15-rc7' of ↵Wolfram Sang
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current i2c-host-fixes for v6.15-rc7 - designware: cleanup properly on probe failure
2025-05-16Merge tag '6.15-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull smb client fixes from Steve French: - Fix memory leak in mkdir error path - Fix max rsize miscalculation after channel reconnect * tag '6.15-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: smb: client: fix zero rsize error messages smb: client: fix memory leak during error handling for POSIX mkdir
2025-05-16Merge branch 'vsock-test-improve-sigpipe-test-reliability'Jakub Kicinski
Stefano Garzarella says: ==================== vsock/test: improve sigpipe test reliability Running the tests continuously I noticed that sometimes the sigpipe test would fail due to a race between the control message of the test and the vsock transport messages. While I was at it I also improved the test by checking the errno we expect. v1: https://lore.kernel.org/20250508142005.135857-1-sgarzare@redhat.com ==================== Link: https://patch.msgid.link/20250514141927.159456-1-sgarzare@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16vsock/test: check also expected errno on sigpipe testStefano Garzarella
In the sigpipe test, we expect send() to fail, but we do not check if send() fails with the errno we expect (EPIPE). Add this check and repeat the send() in case of EINTR as we do in other tests. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://patch.msgid.link/20250514141927.159456-4-sgarzare@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16vsock/test: retry send() to avoid occasional failure in sigpipe testStefano Garzarella
When the other peer calls shutdown(SHUT_RD), there is a chance that the send() call could occur before the message carrying the close information arrives over the transport. In such cases, the send() might still succeed. To avoid this race, let's retry the send() call a few times, ensuring the test is more reliable. Sleep a little before trying again to avoid flooding the other peer and filling its receive buffer, causing false-negative. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://patch.msgid.link/20250514141927.159456-3-sgarzare@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16vsock/test: add timeout_usleep() to allow sleeping in timeout sectionsStefano Garzarella
The timeout API uses signals, so we have documented not to use sleep(), but we can use nanosleep(2) since POSIX.1 explicitly specifies that it does not interact with signals. Let's provide timeout_usleep() for that. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://patch.msgid.link/20250514141927.159456-2-sgarzare@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16mr: consolidate the ipmr_can_free_table() checks.Paolo Abeni
Guoyu Yin reported a splat in the ipmr netns cleanup path: WARNING: CPU: 2 PID: 14564 at net/ipv4/ipmr.c:440 ipmr_free_table net/ipv4/ipmr.c:440 [inline] WARNING: CPU: 2 PID: 14564 at net/ipv4/ipmr.c:440 ipmr_rules_exit+0x135/0x1c0 net/ipv4/ipmr.c:361 Modules linked in: CPU: 2 UID: 0 PID: 14564 Comm: syz.4.838 Not tainted 6.14.0 #1 Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:ipmr_free_table net/ipv4/ipmr.c:440 [inline] RIP: 0010:ipmr_rules_exit+0x135/0x1c0 net/ipv4/ipmr.c:361 Code: ff df 48 c1 ea 03 80 3c 02 00 75 7d 48 c7 83 60 05 00 00 00 00 00 00 5b 5d 41 5c 41 5d 41 5e e9 71 67 7f 00 e8 4c 2d 8a fd 90 <0f> 0b 90 eb 93 e8 41 2d 8a fd 0f b6 2d 80 54 ea 01 31 ff 89 ee e8 RSP: 0018:ffff888109547c58 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff888108c12dc0 RCX: ffffffff83e09868 RDX: ffff8881022b3300 RSI: ffffffff83e098d4 RDI: 0000000000000005 RBP: ffff888104288000 R08: 0000000000000000 R09: ffffed10211825c9 R10: 0000000000000001 R11: ffff88801816c4a0 R12: 0000000000000001 R13: ffff888108c13320 R14: ffff888108c12dc0 R15: fffffbfff0b74058 FS: 00007f84f39316c0(0000) GS:ffff88811b100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f84f3930f98 CR3: 0000000113b56000 CR4: 0000000000350ef0 Call Trace: <TASK> ipmr_net_exit_batch+0x50/0x90 net/ipv4/ipmr.c:3160 ops_exit_list+0x10c/0x160 net/core/net_namespace.c:177 setup_net+0x47d/0x8e0 net/core/net_namespace.c:394 copy_net_ns+0x25d/0x410 net/core/net_namespace.c:516 create_new_namespaces+0x3f6/0xaf0 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xc3/0x180 kernel/nsproxy.c:228 ksys_unshare+0x78d/0x9a0 kernel/fork.c:3342 __do_sys_unshare kernel/fork.c:3413 [inline] __se_sys_unshare kernel/fork.c:3411 [inline] __x64_sys_unshare+0x31/0x40 kernel/fork.c:3411 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xa6/0x1a0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f84f532cc29 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f84f3931038 EFLAGS: 00000246 ORIG_RAX: 0000000000000110 RAX: ffffffffffffffda RBX: 00007f84f5615fa0 RCX: 00007f84f532cc29 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000040000400 RBP: 00007f84f53fba18 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f84f5615fa0 R15: 00007fff51c5f328 </TASK> The running kernel has CONFIG_IP_MROUTE_MULTIPLE_TABLES disabled, and the sanity check for such build is still too loose. Address the issue consolidating the relevant sanity check in a single helper regardless of the kernel configuration. Also share it between the ipv4 and ipv6 code. Reported-by: Guoyu Yin <y04609127@gmail.com> Fixes: 50b94204446e ("ipmr: tune the ipmr_can_free_table() checks.") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Link: https://patch.msgid.link/372dc261e1bf12742276e1b984fc5a071b7fc5a8.1747321903.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16net: airoha: Fix page recycling in airoha_qdma_rx_process()Lorenzo Bianconi
Do not recycle the page twice in airoha_qdma_rx_process routine in case of error. Just run dev_kfree_skb() if the skb has been allocated and marked for recycling. Run page_pool_put_full_page() directly if the skb has not been allocated yet. Moreover, rely on DMA address from queue entry element instead of reading it from the DMA descriptor for DMA syncing in airoha_qdma_rx_process(). Fixes: e12182ddb6e71 ("net: airoha: Enable Rx Scatter-Gather") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250515-airoha-fix-rx-process-error-condition-v2-1-657e92c894b9@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16Merge branch 'tools-ynl-gen-support-sub-messages-and-rt-link'Jakub Kicinski
Jakub Kicinski says: ==================== tools: ynl-gen: support sub-messages and rt-link Sub-messages are how we express "polymorphism" in YNL. Donald added the support to specs and Python a while back, support them in C, too. Sub-message is a nest, but the interpretation of the attribute types within that nest depends on a value of another attribute. For example in rt-link the "kind" attribute contains the link type (veth, bonding, etc.) and based on that the right enum has to be applied to interpret link-specific attributes. The last message is probably the most interesting to look at, as it adds a fairly advanced sample. This patch only contains enough support for rtnetlink, we will need a little more complexity to support TC, where sub-messages may contain fixed headers, and where the selector may be in a different nest than the submessage. ==================== Link: https://patch.msgid.link/20250515231650.1325372-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16tools: ynl: add a sample for rt-linkJakub Kicinski
Add a fairly complete example of rt-link usage. If run without any arguments it simply lists the interfaces and some of their attrs. If run with an arg it tries to create and delete a netkit device. 1 # ./tools/net/ynl/samples/rt-link 1 2 Trying to create a Netkit interface 3 Testing error message for policy being bad: 4 Kernel error: 'Provided default xmit policy not supported' (bad attribute: .linkinfo.data(netkit).policy) 5 1: lo: mtu 65536 6 2: wlp0s1: mtu 1500 7 3: enp0s13: mtu 1500 8 4: dummy0: mtu 1500 kind dummy altname one two 9 5: nk0: mtu 1500 kind netkit primary 0 policy forward 10 6: nk1: mtu 1500 kind netkit primary 1 policy blackhole 11 Trying to delete a Netkit interface (ifindex 6) Sample creates the device first, it sets an invalid value for a netkit attribute to trigger reverse parsing. Line 4 shows the error with the attribute path correctly generated by YNL. Then sample fixes the bad attribute and re-issues the request, with NLM_F_ECHO set. This flag causes the notification to be looped back to the initiating socket (our socket). Sample parses this notification to save the ifindex of the created netkit. Sample then proceeds to list the devices. Line 8 above shows a dummy device with two alt names. Lines 9 and 10 show the netkit devices the sample itself created. The "primary" and "policy" attrs are from inside the netkit submsg. The string values are auto-generated for the enums by YNL. To clean up sample deletes the interface it created (line 11). Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250515231650.1325372-10-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16tools: ynl: enable codegen for all rt- familiesJakub Kicinski
Switch from including Classic netlink families one by one to excluding. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250515231650.1325372-9-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16tools: ynl: submsg: reverse parse / error reportingJakub Kicinski
Reverse parsing lets YNL convert bad and missing attr pointers from extack into a string like "missing attribute nest1.nest2.attr_name". It's a feature that's unique to YNL C AFAIU (even the Python YNL can't do nested reverse parsing). Add support for reverse-parsing of sub-messages. To simplify the logic and the code annotate the type policies with extra metadata. Mark the selectors and the messages with the information we need. We assume that key / selector always precedes the sub-message while parsing (and also if there are multiple sub-messages like in rt-link they are interleaved selector 1 ... submsg 1 ... selector 2 .. submsg 2, not selector 1 ... selector 2 ... submsg 1 ... submsg 2). The rt-link sample in a subsequent changes shows reverse parsing of sub-messages in action. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250515231650.1325372-8-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16tools: ynl-gen: submsg: support parsing and rendering sub-messagesJakub Kicinski
Adjust parsing and rendering appropriately to make sub-messages work. Rendering is pretty trivial, as the submsg -> netlink conversion looks like rendering a nest in which only one attr was set. Only trick is that we use the enum value of the sub-message rather than the nest as the type, and effectively skip one layer of nesting. A real double nested struct would look like this: [SELECTOR] [SUBMSG] [NEST] [MSG1-ATTR] A submsg "is" the nest so by skipping I mean: [SELECTOR] [SUBMSG] [MSG1-ATTR] There is no extra validation in YNL if caller has set the selector matching the submsg type (e.g. link type = "macvlan" but the nest attrs are set to carry "veth"). Let the kernel handle that. Parsing side is a little more specialized as we need to render and insert a new kind of function which switches between what to parse based on the selector. But code isn't too complicated. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250515231650.1325372-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16tools: ynl-gen: submsg: render the structsJakub Kicinski
The easiest (or perhaps only sane) way to support submessages in C is to treat them as if they were nests. Build fake attributes to that effect in the codegen. Render the submsg as a big nest of all possible values. With this in place the main missing part is to hook in the switch which selects how to parse based on the key. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250515231650.1325372-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16tools: ynl-gen: submsg: plumb thru an empty typeJakub Kicinski
Hook in handling of sub-messages, for now treat them as ignored attrs. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250515231650.1325372-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16tools: ynl-gen: prepare for submsg structsJakub Kicinski
Prepare for constructing Struct() instances which represent sub-messages rather than nested attributes. Restructure the code / indentation to more easily insert a case where nested reference comes from annotation other than the 'nested-attributes' property. Make sure we don't construct the Struct() object from scratch in multiple places as the constructor will soon have more arguments. This should cause no functional change. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250515231650.1325372-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16tools: ynl-gen: factor out the annotation of pure nested structJakub Kicinski
We're about to add some code here for sub-messages. Factor out the nest-related logic to make the code readable. No functional change. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250515231650.1325372-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16netlink: specs: rt-link: add C naming info for ovpnJakub Kicinski
C naming info for OVPN which was added since I adjusted the existing attrs. Also add missing reference to a header needed for a bridge struct. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250515231650.1325372-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16net: phy: microchip: document where the LAN88xx PHYs are usedOleksij Rempel
The driver uses the name LAN88xx for PHYs with phy_id = 0x0007c132. But with this placeholder name no documentation can be found on the net. Document the fact that these PHYs are build into the LAN7800 and LAN7850 USB/Ethernet controllers. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250515082051.2644450-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16net: phy: fixed_phy: remove fixed_phy_register_with_gpiodHeiner Kallweit
Since its introduction 6 yrs ago this functions has never had a user. So remove it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/ccbeef28-65ae-4e28-b1db-816c44338dee@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16Merge tag 'drm-fixes-2025-05-17' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Weekly drm fixes, I'll be honest and say I think this is larger than I'd prefer at this point, the main blow out point is that xe has two larger fixes. One is a fix for active context utilisation reporting, it's for a reported regression and will end up in stable anyways, so I don't see any point in holding it up. The second is a fix for mixed cpu/gpu atomics, which are currently broken, but are also not something your average desktop/laptop user is going to hit in normal operation, and having them fixed now is better than threading them through stable later. Other than those, it's mostly the usual, a bunch of amdgpu randoms and a few other minor fixes. dma-buf: - Avoid memory reordering in fence handling meson: - Avoid integer overflow in mode-clock calculations panel-mipi-dbi: - Fix output with drm_client_setup_with_fourcc() amdgpu: - Fix CSA unmap - Fix MALL size reporting on GFX11.5 - AUX fix - DCN 3.5 fix - VRR fix - DP MST fix - DML 2.1 fixes - Silence DP AUX spam - DCN 4.0.1 cursor fix - VCN 4.0.5 fix ivpu: - Fix buffer size in debugfs code gpuvm: - Add timeslicing and allocation restriction for SVM xe: - Fix shrinker debugfs name - Add HW workaround to Xe2 - Fix SVM when mixing GPU and CPU atomics - Fix per client engine utilization due to active contexts not saving timestamp with lite restore enabled" * tag 'drm-fixes-2025-05-17' of https://gitlab.freedesktop.org/drm/kernel: (24 commits) drm/xe: Add WA BB to capture active context utilization drm/xe: Save the gt pointer in lrc and drop the tile drm/xe: Save CTX_TIMESTAMP mmio value instead of LRC value drm/xe: Timeslice GPU on atomic SVM fault drm/gpusvm: Add timeslicing support to GPU SVM drm/xe: Strict migration policy for atomic SVM faults drm/gpusvm: Introduce devmem_only flag for allocation drm/xe/xe2hpg: Add Wa_22021007897 drm/amdgpu: read back register after written for VCN v4.0.5 Revert "drm/amd/display: Hardware cursor changes color when switched to software cursor" dma-buf: insert memory barrier before updating num_fences drm/xe: Fix the gem shrinker name drm/amd/display: Avoid flooding unnecessary info messages drm/amd/display: Fix null check of pipe_ctx->plane_state for update_dchubp_dpp drm/amd/display: check stream id dml21 wrapper to get plane_id drm/amd/display: fix link_set_dpms_off multi-display MST corner case drm/amd/display: Defer BW-optimization-blocked DRR adjustments Revert: "drm/amd/display: Enable urgent latency adjustment on DCN35" drm/amd/display: Correct the reply value when AUX write incomplete drm/amdgpu: fix incorrect MALL size for GFX1151 ...
2025-05-16vmxnet3: update MTU after device quiesceRonak Doshi
Currently, when device mtu is updated, vmxnet3 updates netdev mtu, quiesces the device and then reactivates it for the ESXi to know about the new mtu. So, technically the OS stack can start using the new mtu before ESXi knows about the new mtu. This can lead to issues for TSO packets which use mss as per the new mtu configured. This patch fixes this issue by moving the mtu write after device quiesce. Cc: stable@vger.kernel.org Fixes: d1a890fa37f2 ("net: VMware virtual Ethernet NIC driver: vmxnet3") Signed-off-by: Ronak Doshi <ronak.doshi@broadcom.com> Acked-by: Guolin Yang <guolin.yang@broadcom.com> Changes v1-> v2: Moved MTU write after destroy of rx rings Link: https://patch.msgid.link/20250515190457.8597-1-ronak.doshi@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16net: rfs: add sock_rps_delete_flow() helperEric Dumazet
RFS can exhibit lower performance for workloads using short-lived flows and a small set of 4-tuple. This is often the case for load-testers, using a pair of hosts, if the server has a single listener port. Typical use case : Server : tcp_crr -T128 -F1000 -6 -U -l30 -R 14250 Client : tcp_crr -T128 -F1000 -6 -U -l30 -c -H server | grep local_throughput This is because RFS global hash table contains stale information, when the same RSS key is recycled for another socket and another cpu. Make sure to undo the changes and go back to initial state when a flow is disconnected. Performance of the above test is increased by 22 %, going from 372604 transactions per second to 457773. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Octavian Purdila <tavip@google.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Link: https://patch.msgid.link/20250515100354.3339920-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16r8169: add support for RTL8127AChunHao Lin
This adds support for 10Gbs chip RTL8127A. Signed-off-by: ChunHao Lin <hau@realtek.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/20250515095303.3138-1-hau@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16bridge: netfilter: Fix forwarding of fragmented packetsIdo Schimmel
When netfilter defrag hooks are loaded (due to the presence of conntrack rules, for example), fragmented packets entering the bridge will be defragged by the bridge's pre-routing hook (br_nf_pre_routing() -> ipv4_conntrack_defrag()). Later on, in the bridge's post-routing hook, the defragged packet will be fragmented again. If the size of the largest fragment is larger than what the kernel has determined as the destination MTU (using ip_skb_dst_mtu()), the defragged packet will be dropped. Before commit ac6627a28dbf ("net: ipv4: Consolidate ipv4_mtu and ip_dst_mtu_maybe_forward"), ip_skb_dst_mtu() would return dst_mtu() as the destination MTU. Assuming the dst entry attached to the packet is the bridge's fake rtable one, this would simply be the bridge's MTU (see fake_mtu()). However, after above mentioned commit, ip_skb_dst_mtu() ends up returning the route's MTU stored in the dst entry's metrics. Ideally, in case the dst entry is the bridge's fake rtable one, this should be the bridge's MTU as the bridge takes care of updating this metric when its MTU changes (see br_change_mtu()). Unfortunately, the last operation is a no-op given the metrics attached to the fake rtable entry are marked as read-only. Therefore, ip_skb_dst_mtu() ends up returning 1500 (the initial MTU value) and defragged packets are dropped during fragmentation when dealing with large fragments and high MTU (e.g., 9k). Fix by moving the fake rtable entry's metrics to be per-bridge (in a similar fashion to the fake rtable entry itself) and marking them as writable, thereby allowing MTU changes to be reflected. Fixes: 62fa8a846d7d ("net: Implement read-only protection and COW'ing of metrics.") Fixes: 33eb9873a283 ("bridge: initialize fake_rtable metrics") Reported-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Closes: https://lore.kernel.org/netdev/PH0PR10MB4504888284FF4CBA648197D0ACB82@PH0PR10MB4504.namprd10.prod.outlook.com/ Tested-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20250515084848.727706-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16net: dsa: microchip: linearize skb for tail-tagging switchesJakob Unterwurzacher
The pointer arithmentic for accessing the tail tag only works for linear skbs. For nonlinear skbs, it reads uninitialized memory inside the skb headroom, essentially randomizing the tag. I have observed it gets set to 6 most of the time. Example where ksz9477_rcv thinks that the packet from port 1 comes from port 6 (which does not exist for the ksz9896 that's in use), dropping the packet. Debug prints added by me (not included in this patch): [ 256.645337] ksz9477_rcv:323 tag0=6 [ 256.645349] skb len=47 headroom=78 headlen=0 tailroom=0 mac=(64,14) mac_len=14 net=(78,0) trans=78 shinfo(txflags=0 nr_frags=1 gso(size=0 type=0 segs=0)) csum(0x0 start=0 offset=0 ip_summed=0 complete_sw=0 valid=0 level=0) hash(0x0 sw=0 l4=0) proto=0x00f8 pkttype=1 iif=3 priority=0x0 mark=0x0 alloc_cpu=0 vlan_all=0x0 encapsulation=0 inner(proto=0x0000, mac=0, net=0, trans=0) [ 256.645377] dev name=end1 feat=0x0002e10200114bb3 [ 256.645386] skb headroom: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645395] skb headroom: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645403] skb headroom: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645411] skb headroom: 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645420] skb headroom: 00000040: ff ff ff ff ff ff 00 1c 19 f2 e2 db 08 06 [ 256.645428] skb frag: 00000000: 00 01 08 00 06 04 00 01 00 1c 19 f2 e2 db 0a 02 [ 256.645436] skb frag: 00000010: 00 83 00 00 00 00 00 00 0a 02 a0 2f 00 00 00 00 [ 256.645444] skb frag: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 [ 256.645452] ksz_common_rcv:92 dsa_conduit_find_user returned NULL Call skb_linearize before trying to access the tag. This patch fixes ksz9477_rcv which is used by the ksz9896 I have at hand, and also applies the same fix to ksz8795_rcv which seems to have the same problem. Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@cherry.de> CC: stable@vger.kernel.org Fixes: 016e43a26bab ("net: dsa: ksz: Add KSZ8795 tag code") Fixes: 8b8010fb7876 ("dsa: add support for Microchip KSZ tail tagging") Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/20250515072920.2313014-1-jakob.unterwurzacher@cherry.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16net: dlink: add synchronization for stats updateMoon Yeounsu
This patch synchronizes code that accesses from both user-space and IRQ contexts. The `get_stats()` function can be called from both context. `dev->stats.tx_errors` and `dev->stats.collisions` are also updated in the `tx_errors()` function. Therefore, these fields must also be protected by synchronized. There is no code that accessses `dev->stats.tx_errors` between the previous and updated lines, so the updating point can be moved. Signed-off-by: Moon Yeounsu <yyyynoom@gmail.com> Link: https://patch.msgid.link/20250515075333.48290-1-yyyynoom@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16team: grab team lock during team_change_rx_flagsStanislav Fomichev
Syzkaller reports the following issue: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:578 netdev_lock include/linux/netdevice.h:2751 [inline] netdev_lock_ops include/net/netdev_lock.h:42 [inline] dev_set_promiscuity+0x10e/0x260 net/core/dev_api.c:285 bond_set_promiscuity drivers/net/bonding/bond_main.c:922 [inline] bond_change_rx_flags+0x219/0x690 drivers/net/bonding/bond_main.c:4732 dev_change_rx_flags net/core/dev.c:9145 [inline] __dev_set_promiscuity+0x3f5/0x590 net/core/dev.c:9189 netif_set_promiscuity+0x50/0xe0 net/core/dev.c:9201 dev_set_promiscuity+0x126/0x260 net/core/dev_api.c:286 ^^ all of the above is under rcu lock team_change_rx_flags+0x1b3/0x330 drivers/net/team/team_core.c:1785 dev_change_rx_flags net/core/dev.c:9145 [inline] __dev_set_promiscuity+0x3f5/0x590 net/core/dev.c:9189 netif_set_promiscuity+0x50/0xe0 net/core/dev.c:9201 dev_set_promiscuity+0x126/0x260 net/core/dev_api.c:286 hsr_del_port+0x25e/0x2d0 net/hsr/hsr_slave.c:233 hsr_netdev_notify+0x827/0xb60 net/hsr/hsr_main.c:104 notifier_call_chain+0x1b3/0x3e0 kernel/notifier.c:85 call_netdevice_notifiers_extack net/core/dev.c:2214 [inline] call_netdevice_notifiers net/core/dev.c:2228 [inline] unregister_netdevice_many_notify+0x15d8/0x2330 net/core/dev.c:11970 rtnl_delete_link net/core/rtnetlink.c:3522 [inline] rtnl_dellink+0x488/0x710 net/core/rtnetlink.c:3564 rtnetlink_rcv_msg+0x7cc/0xb70 net/core/rtnetlink.c:6955 netlink_rcv_skb+0x219/0x490 net/netlink/af_netlink.c:2534 netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline] netlink_unicast+0x758/0x8d0 net/netlink/af_netlink.c:1339 netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1883 team_change_rx_flags runs under rcu lock which means we can't grab instance lock for the lower devices. Switch to team->lock, similar to what we already do for team_set_mac_address and team_change_mtu. Fixes: 78cd408356fe ("net: add missing instance lock to dev_set_promiscuity") Reported-by: syzbot+53485086a41dbb43270a@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=53485086a41dbb43270a Link: https://lore.kernel.org/netdev/6822cc81.050a0220.f2294.00e8.GAE@google.com Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com> Link: https://patch.msgid.link/20250514220319.3505158-1-stfomichev@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16net/mlx5e: Reuse per-RQ XDP buffer to avoid stack zeroing overheadCarolina Jubran
CONFIG_INIT_STACK_ALL_ZERO introduces a performance cost by zero-initializing all stack variables on function entry. The mlx5 XDP RX path previously allocated a struct mlx5e_xdp_buff on the stack per received CQE, resulting in measurable performance degradation under this config. This patch reuses a mlx5e_xdp_buff stored in the mlx5e_rq struct, avoiding per-CQE stack allocations and repeated zeroing. With this change, XDP_DROP and XDP_TX performance matches that of kernels built without CONFIG_INIT_STACK_ALL_ZERO. Performance was measured on a ConnectX-6Dx using a single RX channel (1 CPU at 100% usage) at ~50 Mpps. The baseline results were taken from net-next-6.15. Stack zeroing disabled: - XDP_DROP: * baseline: 31.47 Mpps * baseline + per-RQ allocation: 32.31 Mpps (+2.68%) - XDP_TX: * baseline: 12.41 Mpps * baseline + per-RQ allocation: 12.95 Mpps (+4.30%) Stack zeroing enabled: - XDP_DROP: * baseline: 24.32 Mpps * baseline + per-RQ allocation: 32.27 Mpps (+32.7%) - XDP_TX: * baseline: 11.80 Mpps * baseline + per-RQ allocation: 12.24 Mpps (+3.72%) Reported-by: Sebastiano Miano <mianosebastiano@gmail.com> Reported-by: Samuel Dobron <sdobron@redhat.com> Link: https://lore.kernel.org/all/CAMENy5pb8ea+piKLg5q5yRTMZacQqYWAoVLE1FE9WhQPq92E0g@mail.gmail.com/ Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Link: https://patch.msgid.link/1747253032-663457-1-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16ptp: ocp: Limit signal/freq counts in summary output functionsSagi Maimon
The debugfs summary output could access uninitialized elements in the freq_in[] and signal_out[] arrays, causing NULL pointer dereferences and triggering a kernel Oops (page_fault_oops). This patch adds u8 fields (nr_freq_in, nr_signal_out) to track the number of initialized elements, with a maximum of 4 per array. The summary output functions are updated to respect these limits, preventing out-of-bounds access and ensuring safe array handling. Widen the label variables because the change confuses GCC about max length of the strings. Fixes: ef61f5528fca ("ptp: ocp: add Adva timecard support") Signed-off-by: Sagi Maimon <maimon.sagi@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20250514073541.35817-1-maimon.sagi@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16net: phy: mediatek: do not require syscon compatible for pio propertyFrank Wunderlich
Current implementation requires syscon compatible for pio property which is used for driving the switch leds on mt7988. Replace syscon_regmap_lookup_by_phandle with of_parse_phandle and device_node_to_regmap to get the regmap already assigned by pinctrl driver. Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Link: https://patch.msgid.link/20250510174933.154589-1-linux@fw-web.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16wifi: ath12k: pass link_conf for tx_arvif retrievalAloka Dixit
Three out of four callers to ath12k_mac_get_tx_arvif() have link_conf pointer already set for other operations. Pass it as a parameter. Modify ath12k_control_beaconing() to set link_conf first. Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250408184501.3715887-4-aloka.dixit@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16Merge tag 'nfs-for-6.15-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: - NFS: Fix a couple of missed handlers for the ENETDOWN and ENETUNREACH transport errors - NFS: Handle Oopsable failure of nfs_get_lock_context in the unlock path - NFSv4: Fix a race in nfs_local_open_fh() - NFSv4/pNFS: Fix a couple of layout segment leaks in layoutreturn - NFSv4/pNFS Avoid sharing pNFS DS connections between net namespaces since IP addresses are not guaranteed to refer to the same nodes - NFS: Don't flush file data while holding multiple directory locks in nfs_rename() * tag 'nfs-for-6.15-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: Avoid flushing data while holding directory locks in nfs_rename() NFS/pnfs: Fix the error path in pnfs_layoutreturn_retry_later_locked() NFSv4/pnfs: Reset the layout state after a layoutreturn NFS/localio: Fix a race in nfs_local_open_fh() nfs: nfs3acl: drop useless assignment in nfs3_get_acl() nfs: direct: drop useless initializer in nfs_direct_write_completion() nfs: move the nfs4_data_server_cache into struct nfs_net nfs: don't share pNFS DS connections between net namespaces nfs: handle failure of nfs_get_lock_context in unlock path pNFS/flexfiles: Record the RPC errors in the I/O tracepoints NFSv4/pnfs: Layoutreturn on close must handle fatal networking errors NFSv4: Handle fatal ENETDOWN and ENETUNREACH errors
2025-05-16wifi: ath12k: update EMLSR capabilities of ML StationRamasamy Kaliappan
When EMLSR operation is enabled for an ML Station, EMLSR transition timeout, padding delay and transition delay should be updated to Firmware. Above parameters will be used by Firmware to do EMLSR operation such as sending EML operation mode notification frame, initial control frame etc. Obtain above parameters from EML capabilities information present in ieee80211_sta object and update the same to Firmware in peer assoc WMI command sent for ML station. MLO is not enabled in WCN7850 and hence this change is not applicable to it as of now. This can be a leverage once it is enabled in future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Ramasamy Kaliappan <quic_rkaliapp@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250327051320.3253783-5-quic_ramess@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16NFS: Avoid flushing data while holding directory locks in nfs_rename()Trond Myklebust
The Linux client assumes that all filehandles are non-volatile for renames within the same directory (otherwise sillyrename cannot work). However, the existence of the Linux 'subtree_check' export option has meant that nfs_rename() has always assumed it needs to flush writes before attempting to rename. Since NFSv4 does allow the client to query whether or not the server exhibits this behaviour, and since knfsd does actually set the appropriate flag when 'subtree_check' is enabled on an export, it should be OK to optimise away the write flushing behaviour in the cases where it is clearly not needed. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2025-05-16NFS/pnfs: Fix the error path in pnfs_layoutreturn_retry_later_locked()Trond Myklebust
If there isn't a valid layout, or the layout stateid has changed, the cleanup after a layout return should clear out the old data. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2025-05-16NFSv4/pnfs: Reset the layout state after a layoutreturnTrond Myklebust
If there are still layout segments in the layout plh_return_lsegs list after a layout return, we should be resetting the state to ensure they eventually get returned as well. Fixes: 68f744797edd ("pNFS: Do not free layout segments that are marked for return") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2025-05-16wifi: ath12k: Prevent multicast duplication for dynamic VLANMuna Sinada
Since dynamic VLAN traffic is software encrypted and encapsulated, mac80211 handles the duplication on each link for MLO dynamic VLAN multicast. Currently in ath12k_mac_op_tx(), all multicast frames are duplicated and are assigned a mcbc_gsn. This is causing dynamic VLAN multicast traffic to be dropped in hardware. Prevent dynamic VLAN multicast traffic from being duplicated again in the driver. Check if incoming packet is a dynamic VLAN packet and avoid defaulting to multicast conditional. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250424221404.1262597-1-muna.sinada@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: Enable AST index based address search in Station ModeThiraviyam Mariyappan
Currently, TCL performs the TX address search for each entry during transmission, which may lead to packet delays. To mitigate this issue, enable AST index-based address search during transmission in station mode. This AST index-based search is not enabled in AP mode due to the complexity involved in fetching peer information. Implement changes to retrieve the offset of ast_idx/ast_hash values from the PEER_MAP3 event, update the vdev search type to ADDRX, and enable AST lookup in the bank configuration. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Thiraviyam Mariyappan <quic_tmariyap@quicinc.com> Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com> Reviewed-by: Mahendran P <quic_mahep@quicinc.com> Link: https://patch.msgid.link/20250422094255.131226-1-nithyanantham.paramasivam@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: enable monitor mode for WCN7850Kang Yang
Enable monitor mode for WCN7850. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250421023444.1778-14-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: use different packet offset for WCN7850Kang Yang
In ath12k_dp_mon_rx_merg_msdus(), will set packet offset to 8. This is a right value for QCN9274. But WCN7850 use different hardware rings for monitor mode because it doesn't have RX MON component. So the packet offset is different. With current offset, upper-layer application will failed to parse the payload correctly. Should use different value for those who don't have RX MON component. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250421023444.1778-13-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
generated by cgit (git 2.34.1) at 2025-09-12 02:06:22 +0000