| Age | Commit message (Collapse) | Author |
|---|
|
The Fedora 22 version of libdw requires a couple of extra libraries to
link. With a dynamic link the dependencies are pulled in automatically,
but this doesn't work for static linking. Add the needed libraries
explicitely to the feature probe and the Makefile.
v2: Explicitly check for static linking and only add the dependencies
when -static is set. This is to avoid regressions on Arnaldo's system.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1439419717-20601-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Pull networking fixes from David Miller:
1) Workaround hw bug when acquiring PCI bos ownership of iwlwifi
devices, from Emmanuel Grumbach.
2) Falling back to vmalloc in conntrack should not emit a warning, from
Pablo Neira Ayuso.
3) Fix NULL deref when rtlwifi driver is used as an AP, from Luis
Felipe Dominguez Vega.
4) Rocker doesn't free netdev on device removal, from Ido Schimmel.
5) UDP multicast early sock demux has route handling races, from Eric
Dumazet.
6) Fix L4 checksum handling in openvswitch, from Glenn Griffin.
7) Fix use-after-free in skb_set_peeked, from Herbert Xu.
8) Don't advertize NETIF_F_FRAGLIST in virtio_net driver, this can lead
to fraglists longer than the driver can support. From Jason Wang.
9) Fix mlx5 on non-4k-pagesize systems, from Carol L Soto.
10) Fix interrupt storm in bna driver, from Ivan Vecera.
11) Don't propagate -EBUSY from netlink_insert(), from Daniel Borkmann.
12) Fix inet request sock leak, from Eric Dumazet.
13) Fix TX interrupt masking and marking in TX descriptors of fs_enet
driver, from LEROY Christophe.
14) Get rid of rule optimizer in gianfar driver, it's buggy and unlikely
to get fixed any time soon. From Jakub Kicinski
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits)
cosa: missing error code on failure in probe()
gianfar: remove faulty filer optimizer
gianfar: correct list membership accounting
gianfar: correct filer table writing
bonding: Gratuitous ARP gets dropped when first slave added
net: dsa: Do not override PHY interface if already configured
net: fs_enet: mask interrupts for TX partial frames.
net: fs_enet: explicitly remove I flag on TX partial frames
inet: fix possible request socket leak
inet: fix races with reqsk timers
mkiss: Fix error handling in mkiss_open()
bnx2x: Free NVRAM lock at end of each page
bnx2x: Prevent null pointer dereference on SKB release
cxgb4: missing curly braces in t4_setup_debugfs()
net-timestamp: Update skb_complete_tx_timestamp comment
ipv6: don't reject link-local nexthop on other interface
netlink: make sure -EBUSY won't escape from netlink_insert
bna: fix interrupts storm caused by erroneous packets
net: mvpp2: replace TX coalescing interrupts with hrtimer
net: mvpp2: enable proper per-CPU TX buffers unmapping
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC fix from Borislav Petkov:
"A ppc4xx_edac fix for accessing ->csrows properly. This driver was
missed during the conversion a couple of years ago"
* tag 'edac_fix_for_4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC, ppc4xx: Access mci->csrows array elements properly
|
|
Currently mdio bindings are defined in keystone.dtsi and this results
in incorrect unit address for the node on K2E and K2L SoCs. Fix this
by moving them to SoC specific DTS file.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
|
|
Currently the MDIO clock is pointing to clkpa instead of clkcpgmac.
MDIO is part of the ethss and the clock should be clkcpgmac.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fix a NULL pointer exception for omap GPMC bus code if probe fails.
* tag 'omap-for-v4.2/fixes-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
memory: omap-gpmc: Don't try to save uninitialized GPMC context
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
The i.MX fixes for 4.2, 3rd round:
- Fix i.MX6 PCIe interrupt routing which gets missed from stacked IRQ
domain conversion. The PCIe wakeup support is currently broken
because of this.
* tag 'imx-fixes-4.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx6: correct i.MX6 PCIe interrupt routing
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Two fixes for bugs in Exynos power domain error exit path:
1. kfree() of read-only memory (name of power domain returned
by kstrdup_const()),
2. Doubled of_node_put() leading to invalid ref count for OF node.
* tag 'samsung-mach-fixes-4.2' of https://github.com/krzk/linux:
ARM: EXYNOS: fix double of_node_put() on error path
ARM: EXYNOS: Fix potentian kfree() of ro memory
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
This patch is based on the upstream commit 5ac1c4bcf073ad and amended
for v4.2 to make sure it works as intended.
Repeated calls to begin_crtc_commit can cause warnings like this:
[ 169.127746] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:616
[ 169.127835] in_atomic(): 0, irqs_disabled(): 1, pid: 1947, name: kms_flip
[ 169.127840] 3 locks held by kms_flip/1947:
[ 169.127843] #0: (&dev->mode_config.mutex){+.+.+.}, at: [<ffffffff814774bc>] __drm_modeset_lock_all+0x9c/0x130
[ 169.127860] #1: (crtc_ww_class_acquire){+.+.+.}, at: [<ffffffff814774cd>] __drm_modeset_lock_all+0xad/0x130
[ 169.127870] #2: (crtc_ww_class_mutex){+.+.+.}, at: [<ffffffff81477178>] drm_modeset_lock+0x38/0x110
[ 169.127879] irq event stamp: 665690
[ 169.127882] hardirqs last enabled at (665689): [<ffffffff817ffdb5>] _raw_spin_unlock_irqrestore+0x55/0x70
[ 169.127889] hardirqs last disabled at (665690): [<ffffffffc0197a23>] intel_pipe_update_start+0x113/0x5c0 [i915]
[ 169.127936] softirqs last enabled at (665470): [<ffffffff8108a766>] __do_softirq+0x236/0x650
[ 169.127942] softirqs last disabled at (665465): [<ffffffff8108ae75>] irq_exit+0xc5/0xd0
[ 169.127951] CPU: 1 PID: 1947 Comm: kms_flip Not tainted 4.1.0-rc4-patser+ #4039
[ 169.127954] Hardware name: LENOVO 2349AV8/2349AV8, BIOS G1ETA5WW (2.65 ) 04/15/2014
[ 169.127957] ffff8800c49036f0 ffff8800cde5fa28 ffffffff817f6907 0000000080000001
[ 169.127964] 0000000000000000 ffff8800cde5fa58 ffffffff810aebed 0000000000000046
[ 169.127970] ffffffff81c5d518 0000000000000268 0000000000000000 ffff8800cde5fa88
[ 169.127981] Call Trace:
[ 169.127992] [<ffffffff817f6907>] dump_stack+0x4f/0x7b
[ 169.128001] [<ffffffff810aebed>] ___might_sleep+0x16d/0x270
[ 169.128008] [<ffffffff810aed38>] __might_sleep+0x48/0x90
[ 169.128017] [<ffffffff817fc359>] mutex_lock_nested+0x29/0x410
[ 169.128073] [<ffffffffc01635f0>] ? vgpu_write64+0x220/0x220 [i915]
[ 169.128138] [<ffffffffc017fddf>] ? ironlake_update_primary_plane+0x2ff/0x410 [i915]
[ 169.128198] [<ffffffffc0190e75>] intel_frontbuffer_flush+0x25/0x70 [i915]
[ 169.128253] [<ffffffffc01831ac>] intel_finish_crtc_commit+0x4c/0x180 [i915]
[ 169.128279] [<ffffffffc00784ac>] drm_atomic_helper_commit_planes+0x12c/0x240 [drm_kms_helper]
[ 169.128338] [<ffffffffc0184264>] __intel_set_mode+0x684/0x830 [i915]
[ 169.128378] [<ffffffffc018a84a>] intel_crtc_set_config+0x49a/0x620 [i915]
[ 169.128385] [<ffffffff817fdd39>] ? mutex_unlock+0x9/0x10
[ 169.128391] [<ffffffff81467b69>] drm_mode_set_config_internal+0x69/0x120
[ 169.128398] [<ffffffff8119b547>] ? might_fault+0x57/0xb0
[ 169.128403] [<ffffffff8146bf93>] drm_mode_setcrtc+0x253/0x620
[ 169.128409] [<ffffffff8145c600>] drm_ioctl+0x1a0/0x6a0
[ 169.128415] [<ffffffff810b3b41>] ? get_parent_ip+0x11/0x50
[ 169.128424] [<ffffffff811e9ab8>] do_vfs_ioctl+0x2f8/0x530
[ 169.128429] [<ffffffff810d0fcd>] ? trace_hardirqs_on+0xd/0x10
[ 169.128435] [<ffffffff812e7676>] ? selinux_file_ioctl+0x56/0x100
[ 169.128439] [<ffffffff811e9d71>] SyS_ioctl+0x81/0xa0
[ 169.128445] [<ffffffff81800697>] system_call_fastpath+0x12/0x6f
Solve it by using the newly introduced drm_atomic_helper_commit_planes_on_crtc.
The problem here was that the drm_atomic_helper_commit_planes() helper
we were using was basically designed to do
begin_crtc_commit(crtc #1)
begin_crtc_commit(crtc #2)
...
commit all planes
finish_crtc_commit(crtc #1)
finish_crtc_commit(crtc #2)
The problem here is that since our hardware relies on vblank evasion,
our CRTC 'begin' function waits until we're out of the danger zone in
which register writes might wind up straddling the vblank, then disables
interrupts; our 'finish' function re-enables interrupts after the
registers have been written. The expectation is that the operations between
'begin' and 'end' must be performed without sleeping (since interrupts
are disabled) and should happen as quickly as possible. By clumping all
of the 'begin' calls together, we introducing a couple problems:
* Subsequent 'begin' invocations might sleep (which is illegal)
* The first 'begin' ensured that we were far enough from the vblank that
we could write our registers safely and ensure they all fell within
the same frame. Adding extra delay waiting for subsequent CRTC's
wasn't accounted for and could put us back into the 'danger zone' for
CRTC #1.
This commit solves the problem by using a new helper that allows an
order of operations like:
for each crtc {
begin_crtc_commit(crtc) // sleep (maybe), then disable interrupts
commit planes for this specific CRTC
end_crtc_commit(crtc) // reenable interrupts
}
so that sleeps will only be performed while interrupts are enabled and
we can be sure that registers for a CRTC will be written immediately
once we know we're in the safe zone.
The crtc->config->base.crtc update may seem unrelated, but the helper
will use it to obtain the crtc for the state. Without the update it
will dereference NULL and crash.
Changes since v1:
- Use Matt Roper's commit message.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=90398
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
set_config
This should be much cleaner, with the same effects.
(cherry picked for v4.2 from commit fb9d6cf8c29bfcb0b3c602f7ded87f128d730382)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=90398
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
In
commit d328c9d78d64ca11e744fe227096990430a88477
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Fri Apr 10 16:22:37 2015 +0200
drm/i915: Select starting pipe bpp irrespective or the primary plane
we started to select the pipe bpp from sink capabilities and not from
the primary framebuffer - that one might change (and we don't want to
incur a modeset) and sprites might contain higher bpp content too.
We also selected dithering on a 8 bpc screen displaying a 24bpp rgb
primary, because pipe_bpp is 24 for such a typical 8 bpc sink, but since
the commit mentioned above, base_bpp is always the absolute maximum
supported by the hardware, e.g., 36 bpp on my Ironlake chip. Iow. the
only way to not get dithering would have been to connect a deep color 12
bpc display, so pipe_bpp == 36 == base_bpp.
Hence only enable dithering on 6bpc screens where we difinitely and
always want it.
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Reported-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-and-tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Allow selecting the type of callchains per event, including disabling
callchains in all but one entry in an event list, to save space, and also
to ask for the callchains collected in one event to be used in other
events. (Kan Liang)
- Beautify more syscall arguments in 'perf trace': (Arnaldo Carvalho de Melo)
- A bunch more translate file/pathnames from pointers to strings.
- Convert numbers to strings for the 'keyctl' syscall 'option' arg.
- Add missing 'clockid' entries.
- Fix 'perf probe -L sys_*' as it was not showing all the source code for
syscall functions in the kernel. (Masami Hiramatsu)
- Make ESC unzoom as well in the hists browser, i.e. in 'report' and 'top',
as we're considering repurposing the right and left arrow keys to use in
horizontal scrolling, i.e. leave just ESC to be used for what <- works
now, and ENTER for what -> does (they are already aliases for ages).
(Arnaldo Carvalho de Melo)
Infrastructure fixes:
- Check for SRCLINE_UNKNOWN case in "srcfile" processing (Andi Kleen)
- Wrap the slsmg_{printf,write_nstring} slang functions behind ui_browser, so
that we can make the ui_browser based browsers (annotate, menus, hists, etc) UI
library agnostic and usable with multiple backends (slang now, GTK+ and others
in the future, maybe) (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
When doing pointer operation for accessing the HW S/G table,
a value representing number of entries (and not number of bytes)
must be used.
Cc: <stable@vger.kernel.org> # 3.6+
Fixes: 045e36780f115 ("crypto: caam - ahash hmac support")
Signed-off-by: Horia Geant? <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The commit
de3910eb79ac ("edac: change the mem allocation scheme to
make Documentation/kobject.txt happy")
changed the memory allocation for the csrows member. But ppc4xx_edac was
forgotten in the patch. Fix it.
Signed-off-by: Michael Walle <michael@walle.cc>
Cc: <stable@vger.kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Link: http://lkml.kernel.org/r/1437469253-8611-1-git-send-email-michael@walle.cc
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
If register_hdlc_device() fails, the current code returns 0 but we
should return an error code instead.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jakub Kicinski says:
====================
gianfar: filer changes
respinning with examples as requested.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Current filer rule optimization is broken in several ways:
(1) Can perform reads/writes beyond end of allocated tables.
(gianfar_ethtool.c:1326).
(2) It breaks badly for rules with more than 2 specifiers
(e.g. matching ip, port, tos).
Example:
# ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.1 dst-port 1 tos 1 action 1
Added rule with ID 254
# ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.2 dst-port 2 tos 2 action 9
Added rule with ID 253
# ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.3 dst-port 3 tos 3 action 17
Added rule with ID 252
# ./filer_decode /sys/kernel/debug/gfar1/filer_raw
00: MASK == 00000210 AND Q:00 ctrl:00000080 prop:00000210
01: FPR == 00000210 AND CLE Q:00 ctrl:00000281 prop:00000210
02: MASK == ffffffff AND Q:00 ctrl:00000080 prop:ffffffff
03: DPT == 00000003 AND Q:00 ctrl:0000008e prop:00000003
04: TOS == 00000003 AND Q:00 ctrl:0000008a prop:00000003
05: DIA == 0a000003 AND Q:11 ctrl:0000448c prop:0a000003
06: DPT == 00000002 AND Q:00 ctrl:0000008e prop:00000002
07: TOS == 00000002 AND Q:00 ctrl:0000008a prop:00000002
08: DIA == 0a000002 AND Q:09 ctrl:0000248c prop:0a000002
09: DIA == 0a000001 AND Q:00 ctrl:0000008c prop:0a000001
0a: DPT == 00000001 AND Q:00 ctrl:0000008e prop:00000001
0b: TOS == 00000001 CLE Q:01 ctrl:0000060a prop:00000001
ff: MASK >= 00000000 Q:00 ctrl:00000020 prop:00000000
(Entire cluster gets AND-ed together).
(3) We observed that the masking rules it generates do not
play well with clustering on P2020. Only first rule
of the cluster would ever fire. Given that optimizer
relies heavily on masking this is very hard to fix.
Example:
# ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.1 dst-port 1 action 1
Added rule with ID 254
# ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.2 dst-port 2 action 9
Added rule with ID 253
# ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.3 dst-port 3 action 17
Added rule with ID 252
# ./filer_decode /sys/kernel/debug/gfar1/filer_raw
00: MASK == 00000210 AND Q:00 ctrl:00000080 prop:00000210
01: FPR == 00000210 AND CLE Q:00 ctrl:00000281 prop:00000210
02: MASK == ffffffff AND Q:00 ctrl:00000080 prop:ffffffff
03: DPT == 00000003 AND Q:00 ctrl:0000008e prop:00000003
04: DIA == 0a000003 Q:11 ctrl:0000440c prop:0a000003
05: DPT == 00000002 AND Q:00 ctrl:0000008e prop:00000002
06: DIA == 0a000002 Q:09 ctrl:0000240c prop:0a000002
07: DIA == 0a000001 AND Q:00 ctrl:0000008c prop:0a000001
08: DPT == 00000001 CLE Q:01 ctrl:0000060e prop:00000001
ff: MASK >= 00000000 Q:00 ctrl:00000020 prop:00000000
Which looks correct according to the spec but only the first
(eth id 252)/last added rule for 10.0.0.3 will ever trigger.
As if filer did not treat the AND CLE as cluster start but
also kept AND-ing the rules. We found no errata covering this.
The fact that nobody noticed (2) or (3) makes me think
that this feature is not very widely used and we should just
remove it.
Reported-by: Aleksander Dutkowski <adutkowski@gmail.com>
Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Acked-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
At a cost of one line let's make sure .count is correct
when calling gfar_process_filer_changes().
Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MAX_FILER_IDX is the last usable index. Using less-than
will already guarantee that one entry for catch-all rule
will be left, no need to subtract 1 here.
Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the first slave is added (such as during bootup) the first
gratuitous ARP gets dropped. We don't see this drop during a failover.
The packet gets dropped in qdisc (noop_enqueue).
The fix is to delay the sending of gratuitous ARPs till the bond dev's
carrier is present.
It can also be worked around by setting num_grat_arp to more than 1.
Signed-off-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In case we need to divert reads/writes using the slave MII bus, we may have
already fetched a valid PHY interface property from Device Tree, and that
mode is used by the PHY driver to make configuration decisions.
If we could not fetch the "phy-mode" property, we will assign p->phy_interface
to PHY_INTERFACE_MODE_NA, such that we can actually check for that condition as
to whether or not we should override the interface value.
Fixes: 19334920eaf7 ("net: dsa: Set valid phy interface type")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit bcdb247c6b6a ("sd: Limit transfer length") clamped the maximum
size of an I/O request to the MAXIMUM TRANSFER LENGTH field in the BLOCK
LIMITS VPD. This had the unfortunate effect of also limiting the maximum
size of non-filesystem requests sent to the device through sg/bsg.
Avoid using blk_queue_max_hw_sectors() and set the max_sectors queue
limit directly.
Also update the comment in blk_limits_max_hw_sectors() to clarify that
max_hw_sectors defines the limit for the I/O controller only.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reported-by: Brian King <brking@linux.vnet.ibm.com>
Tested-by: Brian King <brking@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # 3.17+
Signed-off-by: James Bottomley <JBottomley@Odin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Fix coarse clock monotonicity (VDSO timestamp off by one jiffy
compared to the syscall one)"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: VDSO: fix coarse clock monotonicity regression
|
|
Since fc_fcp_cleanup_cmd() can sleep this function must not
be called while holding a spinlock. This patch avoids that
fc_fcp_cleanup_each_cmd() triggers the following bug:
BUG: scheduling while atomic: sg_reset/1512/0x00000202
1 lock held by sg_reset/1512:
#0: (&(&fsp->scsi_pkt_lock)->rlock){+.-...}, at: [<ffffffffc0225cd5>] fc_fcp_cleanup_each_cmd.isra.21+0xa5/0x150 [libfc]
Preemption disabled at:[<ffffffffc0225cd5>] fc_fcp_cleanup_each_cmd.isra.21+0xa5/0x150 [libfc]
Call Trace:
[<ffffffff816c612c>] dump_stack+0x4f/0x7b
[<ffffffff810828bc>] __schedule_bug+0x6c/0xd0
[<ffffffff816c87aa>] __schedule+0x71a/0xa10
[<ffffffff816c8ad2>] schedule+0x32/0x80
[<ffffffffc0217eac>] fc_seq_set_resp+0xac/0x100 [libfc]
[<ffffffffc0218b11>] fc_exch_done+0x41/0x60 [libfc]
[<ffffffffc0225cff>] fc_fcp_cleanup_each_cmd.isra.21+0xcf/0x150 [libfc]
[<ffffffffc0225f43>] fc_eh_device_reset+0x1c3/0x270 [libfc]
[<ffffffff814a2cc9>] scsi_try_bus_device_reset+0x29/0x60
[<ffffffff814a3908>] scsi_ioctl_reset+0x258/0x2d0
[<ffffffff814a2650>] scsi_ioctl+0x150/0x440
[<ffffffff814b3a9d>] sd_ioctl+0xad/0x120
[<ffffffff8132f266>] blkdev_ioctl+0x1b6/0x810
[<ffffffff811da608>] block_ioctl+0x38/0x40
[<ffffffff811b4e08>] do_vfs_ioctl+0x2f8/0x530
[<ffffffff811b50c1>] SyS_ioctl+0x81/0xa0
[<ffffffff816cf8b2>] system_call_fastpath+0x16/0x7a
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
|
|
Due to patch "libfc: Do not invoke the response handler after
fc_exch_done()" (commit ID 7030fd62) the lport_recv() call
in fc_exch_recv_req() is passed a dangling pointer. Avoid this
by moving the fc_frame_free() call from fc_invoke_resp() to its
callers. This patch fixes the following crash:
general protection fault: 0000 [#3] PREEMPT SMP
RIP: fc_lport_recv_req+0x72/0x280 [libfc]
Call Trace:
fc_exch_recv+0x642/0xde0 [libfc]
fcoe_percpu_receive_thread+0x46a/0x5ed [fcoe]
kthread+0x10a/0x120
ret_from_fork+0x42/0x70
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
|
|
Pull amd drm fixes from Alex Deucher:
"Dave is on vacation at the moment, so please pull these radeon and
amdgpu fixes directly.
Just a few minor things for 4.2:
- add a new radeon pci id
- fix a power management regression in amdgpu
- fix HEVC command buffer validation in amdgpu"
* 'drm-fixes-4.2' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: add new OLAND pci id
Revert "drm/amdgpu: Configure doorbell to maximum slots"
drm/amdgpu: add context buffer size check for HEVC
|
|
In case of hw iscsi offload, an host can have N-number of active
connections. There can be IO's running on some connections which
make host->host_busy always TRUE. Now if logout from a connection
is tried then the code gets into an infinite loop as host->host_busy
is always TRUE.
iscsi_conn_teardown(....)
{
.........
/*
* Block until all in-progress commands for this connection
* time out or fail.
*/
for (;;) {
spin_lock_irqsave(session->host->host_lock, flags);
if (!atomic_read(&session->host->host_busy)) { /* OK for ERL == 0 */
spin_unlock_irqrestore(session->host->host_lock, flags);
break;
}
spin_unlock_irqrestore(session->host->host_lock, flags);
msleep_interruptible(500);
iscsi_conn_printk(KERN_INFO, conn, "iscsi conn_destroy(): "
"host_busy %d host_failed %d\n",
atomic_read(&session->host->host_busy),
session->host->host_failed);
................
...............
}
}
This is not an issue with software-iscsi/iser as each cxn is a separate
host.
Fix:
Acquiring eh_mutex in iscsi_conn_teardown() before setting
session->state = ISCSI_STATE_TERMINATE.
Signed-off-by: John Soni Jose <sony.john@avagotech.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Chris Leech <cleech@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <JBottomley@Odin.com>
|
|
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
This reverts commit 78ad5cdd21f0d614983fc397338944e797ec70b9.
This commit breaks dpm and suspend/resume on CZ.
|
|
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
|
|
Add tests in tests/parse-events.c to check call-graph and time option.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1439289050-40510-4-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Introduce --show-ref-call-graph for perf report to print reference
callgraph for no callgraph event.
Here is an example.
perf report --show-ref-call-graph --stdio
# To display the perf.data header info, please use
--header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 5 of event 'cpu/cpu-cycles,call-graph=fp/'
# Event count (approx.): 144985
#
# Children Self Command Shared Object Symbol
# ........ ........ ....... ................ ........................................
#
72.30% 0.00% sleep [kernel.vmlinux] [k] entry_SYSCALL_64_fastpath
|
---entry_SYSCALL_64_fastpath
|
|--22.62%-- __GI___libc_nanosleep
--77.38%-- [...]
......
# Samples: 6 of event 'cpu/instructions,call-graph=no/', show reference callgraph
# Event count (approx.): 172780
#
# Children Self Command Shared Object Symbol
# ........ ........ ....... ................ ........................................
#
73.16% 0.00% sleep [kernel.vmlinux] [k] entry_SYSCALL_64_fastpath
|
---entry_SYSCALL_64_fastpath
|
|--31.44%-- __GI___libc_nanosleep
--68.56%-- [...]
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1439289050-40510-3-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch introduce "call-graph=no" to disable per-event callgraph.
Here is an example.
perf record -e 'cpu/cpu-cycles,call-graph=fp/,cpu/instructions,call-graph=no/' sleep 1
perf report --stdio
# To display the perf.data header info, please use
--header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 6 of event 'cpu/cpu-cycles,call-graph=fp/'
# Event count (approx.): 774218
#
# Children Self Command Shared Object Symbol
# ........ ........ ....... ................ ........................................
#
61.94% 0.00% sleep [kernel.vmlinux] [k] entry_SYSCALL_64_fastpath
|
---entry_SYSCALL_64_fastpath
|
|--97.30%-- __brk
|
--2.70%-- mmap64
_dl_check_map_versions
_dl_check_all_versions
61.94% 0.00% sleep [kernel.vmlinux] [k] perf_event_mmap
|
---perf_event_mmap
|
|--97.30%-- do_brk
| sys_brk
| entry_SYSCALL_64_fastpath
| __brk
|
--2.70%-- mmap_region
do_mmap_pgoff
vm_mmap_pgoff
sys_mmap_pgoff
sys_mmap
entry_SYSCALL_64_fastpath
mmap64
_dl_check_map_versions
_dl_check_all_versions
......
# Samples: 6 of event 'cpu/instructions,call-graph=no/'
# Event count (approx.): 359692
#
# Children Self Command Shared Object Symbol
# ........ ........ ....... ................ .................................
#
89.03% 0.00% sleep [unknown] [.] 0xffff6598ffff6598
89.03% 0.00% sleep ld-2.17.so [.] _dl_resolve_conflicts
89.03% 0.00% sleep [kernel.vmlinux] [k] page_fault
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1439289050-40510-2-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patchkit adds the ability to set callgraph mode (fp, dwarf, lbr) per
event. This in term can reduce sampling overhead and the size of the
perf.data.
Here is an example.
perf record -e 'cpu/cpu-cycles,period=1000,call-graph=fp,time=1/,cpu/instructions,call-graph=lbr/' sleep 1
perf evlist -v
cpu/cpu-cycles,period=1000,call-graph=fp,time=1/: type: 4, size: 112,
config: 0x3c, { sample_period, sample_freq }: 1000, sample_type:
IP|TID|TIME|CALLCHAIN|PERIOD|IDENTIFIER, read_format: ID, disabled: 1,
inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all:
1, exclude_guest: 1, mmap2: 1, comm_exec: 1
cpu/instructions,call-graph=lbr/: type: 4, size: 112, config: 0xc0, {
sample_period, sample_freq }: 4000, sample_type:
IP|TID|TIME|CALLCHAIN|PERIOD|BRANCH_STACK|IDENTIFIER, read_format: ID,
disabled: 1, inherit: 1, freq: 1, enable_on_exec: 1, sample_id_all: 1,
exclude_guest: 1
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1439289050-40510-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
"perf probe --lines sys_poll" shows only the first line of sys_poll,
because the SYSCALL_DEFINE macro:
----
SYSCALL_DEFINE*(foo,...)
{
body;
}
----
is expanded as below (on debuginfo)
----
static inline int SYSC_foo(...)
{
body;
}
int SyS_foo(...) <- is an alias of sys_foo.
{
return SYSC_foo(...);
}
----
So, "perf probe --lines sys_foo" decodes SyS_foo function and it also skips
inlined functions(SYSC_foo) inside the target function because those functions
are usually defined somewhere else.
To fix this issue, this fix checks whether the inlined function is defined at
the same point of the target function, and if so, it doesn't skip the inline
function.
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150812012406.11811.94691.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"regmap: Fix handling of present bits on rbtree cache block resize
When expanding a cache block we use krealloc() to resize the register
present bitmap without initialising the newly allocated data (the
original code was written for kzalloc()). Add an appropraite memset()
to fix that"
* tag 'regmap-fix-v4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: regcache-rbtree: Clean new present bits on present bitmap resize
|
|
In addition to <-, that may be repurposed for horizontal scrolling.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-w3rctelxr4yxrjufx7z3fclb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When creating dm-cache with the default policy, it will call
request_module("dm-cache-default") to register the default policy.
But the "dm-cache-default" alias was left referring to the MQ policy.
Fix this by moving the module alias to SMQ.
Fixes: bccab6a0 (dm cache: switch the "default" cache replacement policy from mq to smq)
Signed-off-by: Yi Zhang <yizhan@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
When using nested btrees, the top leaves of the top levels contain
block addresses for the root of the next tree down. If we shadow a
shared leaf node the leaf values (sub tree roots) should be incremented
accordingly.
This is only an issue if there is metadata sharing in the top levels.
Which only occurs if metadata snapshots are being used (as is possible
with dm-thinp). And could result in a block from the thinp metadata
snap being reused early, thus corrupting the thinp metadata snap.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
|
|
The device details and mapping trees were just being decremented
before. Now btree_del() is called to do a deep delete.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
|
|
To remove direct access to libslang functions, with the immediate goal
of implementing horizontal scrolling at the ui_browser level, but also
because we may at some point want to implement ui_browser with other UIs
in addition to the current libslang implementation.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-w0niblabqrkecs4o0eogfy6c@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To remove direct access to libslang functions, with the immediate goal
of implementing horizontal scrolling at the ui_browser level, but also
because we may at some point want to implement ui_browser with other UIs
in addition to the current libslang implementation.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-437ineavoejzou727mr9bxpi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
8.697 (0.103 ms): pool/2343 keyctl(option: GET_PERSISTENT, arg2: 1000, arg3: 4294967294, arg4: 140703061514067, arg5: 140703692383680) = 1023192809
8.763 (0.049 ms): pool/2343 keyctl(option: SEARCH, arg2: 1023192809, arg3: 140703745767772, arg4: 140703745767832, arg5: 4294967294) = 140224497
8.789 (0.016 ms): pool/2343 keyctl(option: SEARCH, arg2: 140224497, arg3: 140703745767814, arg4: 140703745767900) = 512300257
8.807 (0.011 ms): pool/2343 keyctl(option: READ, arg2: 512300257 ) = 13
8.822 (0.008 ms): pool/2343 keyctl(option: READ, arg2: 512300257, arg3: 140703061514000, arg4: 13 ) = 13
8.837 (0.007 ms): pool/2343 keyctl(option: READ, arg2: 140224497 ) = 4
8.852 (0.009 ms): pool/2343 keyctl(option: READ, arg2: 140224497, arg3: 140703061514000, arg4: 4 ) = 4
8.869 (0.010 ms): pool/2343 keyctl(option: SEARCH, arg2: 140224497, arg3: 140703745767772, arg4: 140703061514032) = -1 ENOKEY Required key not available
8.892 (0.017 ms): pool/2343 keyctl(option: DESCRIBE, arg2: 512300257 ) = 43
8.910 (0.012 ms): pool/2343 keyctl(option: DESCRIBE, arg2: 512300257, arg3: 140703061544384, arg4: 43) = 43
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-013ab219irsxngyumrf5gp8s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
But we really should have something like 'strace -yy' here...
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-eyrt1ypfq68u4ljagyk2nj1i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Handle the SRCLINE_UNKNOWN case correctly when processing "srcfile".
Commiter note:
We can't just free it, as it was't allocated via malloc, its a guard
variable.
Reported-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20150811133655.GC4524@tassilo.jf.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We were missing:
CLOCK_BOOTTIME, CLOCK_REALTIME_ALARM, CLOCK_BOOTTIME_ALARM,
CLOCK_SGI_CYCLE and CLOCK_TAI.
Add them.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-d67rwqtwm9jyenwes98kr0cr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This time using 'trinity' to test these:
fchmodat, futimesat, llistxattr, lremovexattr, lstat, mknodat,
mq_unlink, stat and vmsplice.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-a1uqu249nwwh0ixrhm80k4a4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Introduce 'srcfile' sort key: (Andi Kleen)
# perf record -F 10000 usleep 1
# perf report --stdio --dsos '[kernel.vmlinux]' -s srcfile
<SNIP>
# Overhead Source File
26.49% copy_page_64.S
5.49% signal.c
0.51% msr.h
#
It can be combined with other fields, for instance, experiment with
'-s srcfile,symbol'.
There are some oddities in some distros and with some specific DSOs, being
investigated, so your mileage may vary.
- Update the column width for the "srcline" sort key (Arnaldo Carvalho de Melo)
- Support per-event 'freq' term: (Namhyung Kim)
$ perf record -e 'cpu/instructions,freq=1234/',cycles -c 1000 sleep 1
$ perf evlist -F
cpu/instructions,freq=1234/: sample_freq=1234
cycles: sample_period=1000
$
Infrastructure changes:
- Move perf_counts struct and functions into separate object (Jiri Olsa)
- Unset perf_event_attr::freq when period term is set (Jiri Olsa)
- Move callchain option parsing code to util.c (Kan Liang)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This patch just cleans up some files of Intel Processor Trace, does not
change its behavior. This patch removes unused definitions and replaces a
constant value with a macro.
Signed-off-by: Takao Indoh <indou.takao@jp.fujitsu.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin<alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: H.Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1438681015-5124-1-git-send-email-indou.takao@jp.fujitsu.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
allocations
A question [1] was raised about the use of page::private in AUX buffer
allocations, so let's add a clarification about its intended use.
The private field and flag are used by perf's rb_alloc_aux() path to
tell the pmu driver the size of each high-order allocation, so that the
driver can program those appropriately into its hardware. This only
matters for PMUs that don't support hardware scatter tables. Otherwise,
every page in the buffer is just a page.
This patch adds a comment about the private field to the AUX buffer
allocation path.
[1] http://marc.info/?l=linux-kernel&m=143803696607968
Reported-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1438063204-665-1-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
