| Age | Commit message (Collapse) | Author |
|---|
|
Fireworks uses TSB43CB43(IceLynx-Micro) as its IEC 61883-1/6 interface.
This chip includes ARM7 core, and loads and runs program. The firmware
is stored in on-board memory and loaded every powering-on from it.
Echo Audio ships several versions of firmwares for each model. These
firmwares have each quirk and the quirk changes a sequence of packets.
As long as I investigated, AudioFire2/AudioFire4/AudioFirePre8 have a
quirk to transfer a first packet with 0x02 in its dbc field. This causes
ALSA Fireworks driver to detect discontinuity. In this case, firmware
version 5.7.0, 5.7.3 and 5.8.0 are used.
Payload CIP CIP
quadlets header1 header2
02 00050002 90ffffff <-
42 0005000a 90013000
42 00050012 90014400
42 0005001a 90015800
02 0005001a 90ffffff
42 00050022 90019000
42 0005002a 9001a400
42 00050032 9001b800
02 00050032 90ffffff
42 0005003a 9001d000
42 00050042 9001e400
42 0005004a 9001f800
02 0005004a 90ffffff
(AudioFire2 with firmware version 5.7.)
$ dmesg
snd-fireworks fw1.0: Detect discontinuity of CIP: 00 02
These models, AudioFire8 (since Jul 2009 ) and Gibson Robot Interface
Pack series uses the same ARM binary as their firmware. Thus, this
quirk may be observed among them.
This commit adds a new member for AMDTP structure. This member represents
the value of dbc field in a first AMDTP packet. Drivers can set it with
a preferred value according to model's quirk.
Tested-by: Johannes Oertei <johannes.oertel@uni-due.de>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This reverts commit 9c6893e0be38b6ca9a56a854226e51dee0a16a5a.
The fix is superseded by the next commit as a better implementation
for supporting AudioFire2/AudioFire4/AudioFirePre8 quirks.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Including access_ok.h causes the ia64:allmodconfig build (and maybe others)
to fail with
include/linux/unaligned/le_struct.h:6:19: error:
redefinition of 'get_unaligned_le16'
include/linux/unaligned/access_ok.h:7:19: note:
previous definition of 'get_unaligned_le16' was here
include/linux/unaligned/le_struct.h:26:20: error:
redefinition of 'put_unaligned_le32'
include/linux/unaligned/access_ok.h:42:20: note:
previous definition of 'put_unaligned_le32' was here
include/linux/unaligned/le_struct.h:31:20: error:
redefinition of 'put_unaligned_le64'
include/linux/unaligned/access_ok.h:47:20: note:
previous definition of 'put_unaligned_le64' was here
Include unaligned.h instead and leave it up to the architecture to decide
how to implement unaligned accesses.
Fixes: 8c4f136497315 ("Staging: lustre: Use put_unaligned_le64")
Cc: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that we can get there in RCU mode, we shouldn't play with
nd->path.dentry->d_inode - it's not guaranteed to be stable.
Use nd->inode instead.
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Without this initialization, gateways which actually announce up/down
bandwidth of 0/0 could be added. If these nodes get purged via
_batadv_purge_orig() later, the gw_node structure does not get removed
since batadv_gw_node_delete() updates the gw_node with up/down
bandwidth of 0/0, and the updating function then discards the change
and does not free gw_node.
This results in leaking the gw_node structures, which references other
structures: gw_node -> orig_node -> orig_node_ifinfo -> hardif. When
removing the interface later, the open reference on the hardif may cause
hangs with the infamous "unregister_netdevice: waiting for mesh1 to
become free. Usage count = 1" message.
Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
|
|
The tt_local_entry deletion performed in batadv_tt_local_remove() was neither
protecting against simultaneous deletes nor checking whether the element was
still part of the list before calling hlist_del_rcu().
Replacing the hlist_del_rcu() call with batadv_hash_remove() provides adequate
protection via hash spinlocks as well as an is-element-still-in-hash check to
avoid 'blind' hash removal.
Fixes: 068ee6e204e1 ("batman-adv: roaming handling mechanism redesign")
Reported-by: alfonsname@web.de
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
|
|
batadv_softif_vlan_get() may return NULL which has to be verified
by the caller.
Fixes: 35df3b298fc8 ("batman-adv: fix TT VLAN inconsistency on VLAN re-add")
Reported-by: Ryan Thompson <ryan@eero.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
|
|
When a node running DAT receives an ARP request from the LAN for the
first time, it is likely that this node will request the ARP entry
through the distributed ARP table (DAT) in the mesh.
Once a DAT reply is received the asking node must check if the MAC
address for which the IP address has been asked is local. If it is, the
node must drop the ARP reply bceause the client should have replied on
its own locally.
Forwarding this reply means fooling any L2 bridge (e.g. Ethernet
switches) lying between the batman-adv node and the LAN. This happens
because the L2 bridge will think that the client sending the ARP reply
lies somewhere in the mesh, while this node is sitting in the same LAN.
Reported-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fix from Bjorn Helgaas:
"This is a trivial fix for a change that broke user program compilation
(QEMU in this case)"
* tag 'pci-v4.2-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Restore PCI_MSIX_FLAGS_BIRMASK definition
|
|
git://anongit.freedesktop.org/drm-intel
Pull drm mst fixes from Daniel Vetter:
"Special pull request for mst fixes since most of the patches touch
code outside of i915 proper. DRM parts have also been reviewed by
Thierry (nvidia) since Dave's enjoying vacations"
* tag 'topic/mst-fixes-2015-08-04' of git://anongit.freedesktop.org/drm-intel:
drm/atomic-helpers: Make encoder picking more robust
drm/dp-mst: Remove debug WARN_ON
drm/i915: Fixup dp mst encoder selection
drm/atomic-helper: Add an atomice best_encoder callback
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen bug fixes from David Vrabel:
- don't lose interrupts when offlining CPUs
- fix gntdev oops during unmap
- drop the balloon lock occasionally to allow domain create/destroy
* tag 'for-linus-4.2-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events/fifo: Handle linked events when closing a port
xen: release lock occasionally during ballooning
xen/gntdevt: Fix race condition in gntdev_release()
|
|
Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This register is required to be passed to the SATA PHY driver
to workaround errata i783 (SATA Lockup After SATA DPLL Unlock/Relock).
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
The libtraceevent handler (session->tevent) is only initialized when
there are tracepoints in a perf.data event list, so do not call
pevent_set_function_resolve() in those cases, fixing a segfault.
Reported-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-xyynkucl5p4bcs13zi4i4b1f@git.kernel.org
Report-link: http://lkml.kernel.org/r/20150803174113.GA20282@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
An event channel bound to a CPU that was offlined may still be linked
on that CPU's queue. If this event channel is closed and reused,
subsequent events will be lost because the event channel is never
unlinked and thus cannot be linked onto the correct queue.
When a channel is closed and the event is still linked into a queue,
ensure that it is unlinked before completing.
If the CPU to which the event channel bound is online, spin until the
event is handled by that CPU. If that CPU is offline, it can't handle
the event, so clear the event queue during the close, dropping the
events.
This fixes the missing interrupts (and subsequent disk stalls etc.)
when offlining a CPU.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild fixes from Michal Marek:
"Two fixes for kbuild:
- The new ARCH_{CPP,A,C}FLAGS variables are reset before including
the arch Makefile
- Fix calling make modules_install twice when module compression is
enabled"
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
Makefile: Force gzip and xz on module install
kbuild: Do not pick up ARCH_{CPP,A,C}FLAGS from the environment
|
|
During unbinding the driver was dereferencing a pointer to memory
already freed by power_supply_unregister().
Driver was freeing its internal description of battery through pointers
stored in power_supply structure. However, because the core owns the
power supply instance, after calling power_supply_unregister() this
memory is freed and the driver cannot access these members.
Fix this by storing the pointer to internal description of battery in a
local variable before calling power_supply_unregister(), so the pointer
remains valid.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reported-by: H.J. Lu <hjl.tools@gmail.com>
Fixes: 297d716f6260 ("power_supply: Change ownership from driver to core")
Cc: <stable@vger.kernel.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
We've had a few issues with atomic where subtle bugs in the encoder
picking logic lead to accidental self-stealing of the encoder,
resulting in a NULL connector_state->crtc in update_connector_routing
and subsequent.
Linus applied some duct-tape for an mst regression in
commit 27667f4744fc5a0f3e50910e78740bac5670d18b
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Wed Jul 29 22:18:16 2015 -0700
i915: temporary fix for DP MST docking station NULL pointer dereference
But that was incomplete (the code will still oops when debuggin is
enabled) and mangled the state even further. So instead WARN and bail
out as the more future-proof option.
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
Apparently been in there since forever and fairly easy to hit when
hotplugging really fast. I can do that since my mst hub has a manual
button to flick the hpd line for reprobing. The resulting WARNING spam
isn't pretty.
Cc: Dave Airlie <airlied@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
In
commit 8c7b5ccb729870e606321b3703e2c2e698c49a95
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date: Tue Apr 21 17:13:19 2015 +0300
drm/i915: Use atomic helpers for computing changed flags
we've switched over to the atomic version to compute the
crtc->encoder->connector routing from the i915 variant. That one
relies upon the ->best_encoder callback, but the i915-private version
relied upon intel_find_encoder. Which didn't matter except for dp mst,
where the encoder depends upon the selected crtc.
Fix this functional bug by implemented a correct atomic-state based
encoder selector for dp mst.
Note that we can't get rid of the legacy best_encoder callback since
the fbdev emulation uses that still. That means it's incorrect there
still, but that's been the case ever since i915 dp mst support was
merged so not a regression. Best to fix that by converting fbdev over
to atomic too.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
With legacy helpers all the routing was already set up when calling
best_encoder and so could be inspected. But with atomic it's staged,
hence we need a new atomic compliant callback for drivers which need
to inspect the requested state and can't just decided the best encoder
statically.
This is needed to fix up i915 dp mst where we need to pick the right
encoder depending upon the requested CRTC for the connector.
v2: Don't forget to amend the kerneldoc
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
Vince Weaver and Stephane Eranian reported warnings in the PEBS
code when running the perf fuzzer. Stephane wrote:
> I can reproduce the problem on my HSW running the fuzzer.
>
> I can see why this could be happening if you are mixing PEBS and non PEBS events
> in the bottom 4 counters. I suspect:
> for (bit = 0; bit < x86_pmu.max_pebs_events; bit++) {
> if ((counts[bit] == 0) && (error[bit] == 0))
> continue;
>
> This test is not correct when you have non-PEBS events mixed with
> PEBS events and they overflow at the same time. They will have
> counts[i] != 0 but error[i] == 0, and thus you fall thru the loop
> and hit the assert. Or it is something along those lines.
The only way I can make this work is if ->status only has !PEBS events
set, because if it has both set we'll take that slow path which masks
out the !PEBS bits.
After masking there are 3 options:
- there is one bit set, and its @bit, we increment counts[bit].
- there are multiple bits set, we increment error[] for each set bit,
we do not increment counts[].
- there are no bits set, we do nothing.
The intent was to never increment counts[] for !PEBS events.
Now if we start out with only a single !PEBS event set, we'll pass the
test and increment counts[] for a !PEBS and hit the warn.
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
When disabling a PEBS event, we need to drain the buffer. Doing so
requires a correct cpuc->pebs_active mask.
The current code clears the pebs_active bit before draining the
buffer. Fix that.
Signed-off-by: "Liang, Kan" <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver<vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/37D7C6CF3E00A74B8858931C1DB2F07701885A65@SHSMSX103.ccr.corp.intel.com
[ Fixed the SOB. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This patch adds an MSR PMU to support free running MSR counters. Such
as time and freq related counters includes TSC, IA32_APERF, IA32_MPERF
and IA32_PPERF, but also SMI_COUNT.
The events are exposed in sysfs for use by perf stat and other tools.
The files are under /sys/devices/msr/events/
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Kan Liang <kan.liang@intel.com>
[ s/freq/msr/, added SMI_COUNT, fixed bugs. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: adrian.hunter@intel.com
Cc: dsahern@gmail.com
Cc: eranian@google.com
Cc: jolsa@kernel.org
Cc: mark.rutland@arm.com
Cc: namhyung@kernel.org
Link: http://lkml.kernel.org/r/1437407346-31186-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The uncore subsystem for Broadwell-DE is similar to Haswell-EP. There
are some differences in pci device IDs, box number and constraints.
Please refer to the public document:
http://www.intel.com/content/www/us/en/processors/xeon/xeon-d-1500-uncore-performance-monitoring.html
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1435839172-15114-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The next patch adds a new perf extra register where 0x1ff is not a valid
value. Use 0x11 instead.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1435707205-6676-3-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
merge_attr() allows to merge two sysfs attribute tables.
Export it to be usable by other files too.
Next patch is going to use that to extend the sysfs format
attributes for a CPU.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1435612935-24425-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
In callstack mode the LBR is not a ring buffer, but a stack that grows up
and down. This means in this case we don't need to access all LBRs, only the
ones up to TOS. Do this optimization for the normal LBR read, and the context
switch save/restore code. For save/restore it can be done unconditionally, as
it only runs when call stack mode is active.
This recovers some of the cost of going to 32 LBRs on Skylake.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: eranian@google.com
Cc: jolsa@redhat.com
Link: http://lkml.kernel.org/r/1432786398-23861-6-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Use the correct index to save/restore the LBR_INFO_x MSR in
callstack mode. This is more a cleanup, as even with the wrong
index the register was correctly saved/restored, and also
LBR callgraph mode in perf tools do not really need anything in
LBR_INFO. But still better to use the right index.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: eranian@google.com
Cc: jolsa@redhat.com
Link: http://lkml.kernel.org/r/1432786398-23861-5-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Add perf core PMU support for future Intel Skylake CPU cores.
The code is based on Haswell/Broadwell.
There is a new cache event list, based on the updated Haswell
event list.
Skylake has removed most counter constraints on basic
events, so the basic constraints table now only has a single
entry (plus the fixed counters).
TSX support and various other setups are all shared with Haswell.
Skylake has 32 LBR entries. Add a new LBR init function
to set this up. The filters are all the same as Haswell.
It also has a new LBR format with a separate LBR_INFO_* MSR,
but that has been already added earlier.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1431285767-27027-7-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
In Arch perfmon v4 the GLOBAL_STATUS reset automatically unfreezes
LBRs. So no need to do it manually in the LBR code. Add a check
to skip it.
v2: Move test up to beginning of function.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1431285767-27027-9-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
With Arch Perfmon v4 the PMU ack unfreezes the LBRs. So we need to do
the PMU ack after the LBR reading, otherwise the LBRs would be polluted
by the PMI handler.
This is a minimal change. In principle the ACK could be moved much later.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1431285767-27027-10-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
ArchPerfmon v4 has some new status bits in GLOBAL_STATUS.
These need to be ignored when deciding whether a NMI
was an NMI, to avoid eating all NMIs when they
stay set, see:
b292d7a10487 ("perf/x86/intel: ignore CondChgd bit to avoid false NMI handling")
This patch ignores the new ASIF bit, which indicates
that SGX interfered with the PMU, and also the new
LBR freezing bits, which are set when the LBRs get
frozen, plus the existing CondChange (set by JTAG
debuggers and some buggy BIOSes)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1431285767-27027-8-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Add support for the new LBRv5 format used on Intel Skylake CPUs.
The flags for mispredict, abort, in_tx etc. moved to range of separate
LBR_INFO_* MSRs. Teach the LBR code to read those. The original
LBR registers stay the same, except they have full sign
extension now.
LBR_INFO also reports a cycle count to the last branch.
Report the cycle information using the new "cycles" branch_info
output field.
In addition we have to context switch and clear the new INFO
MSRs to avoid any information leaks.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1431285767-27027-6-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Intel Skylake supports reporting the time in cycles a branch in the LBR
took, to give a rough indication of the basic block performance.
Export the cycle information in the branch_info structure.
This can be done by just reusing some currently zero padding.
This is just the generic header change. The architecture
still needs to fill it in.
There's no attempt to convert to real time, as we really
want cycles here.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1431285767-27027-5-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Add new MSRs (LBR_INFO) and some new MSR bits used by the Intel Skylake
PMU driver.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1431285767-27027-4-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
With PEBSv3 the PEBS record contains a time stamp. That means we can allow
free-running PEBS without a PMI even if the user program requested a time stamp.
This avoids the need to use -T to get free running PEBS, and also avoids
any problems with mis-identifying MMAPs later.
Move the free_running_flags state into a variable in x86_pmu and use it.
This only works when no explicit clock_id is set.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: eranian@google.com
Cc: jolsa@redhat.com
Cc: kan.liang@intel.com
Link: http://lkml.kernel.org/r/1432786398-23861-2-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
PEBSv3 is the same as the existing PEBSv2 used on Haswell,
but it adds a new TSC field. Add support to the generic
PEBS handler to handle the new format, and overwrite
the perf time stamp using the new native_sched_clock_from_tsc().
Right now the time stamp is just slightly more accurate,
as it is nearer the actual event trigger point. With
the PEBS threshold > 1 patchkit it will be much more accurate,
avoid the problems with MMAP mismatches earlier.
The accurate time stamping is only implemented for
the default trace clock for now.
v2: Use _skl prefix. Check for default clock_id.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1431285767-27027-3-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
PEBSv3 has a raw TSC time stamp in its memory buffer that
later needs to to be converted to perf_clock.
Add a native_sched_clock_from_tsc() that works the same
as native_sched_clock(), but starts with an already given
TSC value.
Paravirt is ignored, it will just get the native clock.
But there isn't a para virtualized PEBS anyway.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1431285767-27027-2-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Intel PT chapter in the new Intel Architecture SDM adds several packets
corresponding enable bits and registers that control packet generation.
Also, additional bits in the Intel PT CPUID leaf were added to enumerate
presence and parameters of these new packets and features.
The packets and enables are:
* CYC: cycle accurate mode, provides the number of cycles elapsed since
previous CYC packet; its presence and available threshold values are
enumerated via CPUID;
* MTC: mini time counter packets, used for tracking TSC time between
full TSC packets; its presence and available resolution options are
enumerated via CPUID;
* PSB packet period is now configurable, available period values are
enumerated via CPUID.
This patch adds corresponding bit and register definitions, pmu driver
capabilities based on CPUID enumeration, new attribute format bits for
the new featurens and extends event configuration validation function
to take these into account.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: adrian.hunter@intel.com
Cc: hpa@zytor.com
Link: http://lkml.kernel.org/r/1438262131-12725-1-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Currently, the PT driver zeroes out the status register every time before
starting the event. However, all the writable bits are already taken care
of in pt_handle_status() function, except the new PacketByteCnt field,
which in new versions of PT contains the number of packet bytes written
since the last sync (PSB) packet. Zeroing it out before enabling PT forces
a sync packet to be written. This means that, with the existing code, a
sync packet (PSB and PSBEND, 18 bytes in total) will be generated every
time a PT event is scheduled in.
To avoid these unnecessary syncs and save a WRMSR in the fast path, this
patch changes the default behavior to not clear PacketByteCnt field, so
that the sync packets will be generated with the period specified as
"psb_period" attribute config field. This has little impact on the trace
data as the other packets that are normally sent within PSB+ (between PSB
and PSBEND) have their own generation scenarios which do not depend on the
sync packets.
One exception where we do need to force PSB like this when tracing starts,
so that the decoder has a clear sync point in the trace. For this purpose
we aready have hw::itrace_started flag, which we are currently using to
output PERF_RECORD_ITRACE_START. This patch moves setting itrace_started
from perf core to the pmu::start, where it should still be 0 on the very
first run.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: adrian.hunter@intel.com
Cc: hpa@zytor.com
Link: http://lkml.kernel.org/r/1438264104-16189-1-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The check looked wrong, although I think it was actually safe. TASK_SIZE
is unnecessarily small for compat tasks, and it wasn't possible to make
a range breakpoint so large it started in user space and ended in kernel
space.
Nonetheless, let's fix up the check for the benefit of future
readers. A breakpoint is in the kernel if either end is in the
kernel.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/136be387950e78f18cea60e9d1bef74465d0ee8f.1438312874.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Range breakpoints will do the wrong thing if the address isn't
aligned. While we're there, add comments about why it's safe for
instruction breakpoints.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/ae25d14d61f2f43b78e0a247e469f3072df7e201.1438312874.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Code on the kprobe blacklist doesn't want unexpected int3
exceptions. It probably doesn't want unexpected debug exceptions
either. Be safe: disallow breakpoints in nokprobes code.
On non-CONFIG_KPROBES kernels, there is no kprobe blacklist. In
that case, disallow kernel breakpoints entirely.
It will be particularly important to keep hw breakpoints out of the
entry and NMI code once we move debug exceptions off the IST stack.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/e14b152af99640448d895e3c2a8c2d5ee19a1325.1438312874.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
AVG_LATENCY(bit 38) is only available on MSR_OFFCORE_RSP0.
So the bit should be removed from RSP1 valid_mask.
Since RSP0 and RSP1 may have different valid_mask, intel_alt_er should
validate the config on the alternate offcore reg before replacing it.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1435170215-5017-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The x86_lbr_exclusive commit (4807034248be "perf/x86: Mark Intel PT and
LBR/BTS as mutually exclusive") mistakenly moved intel_pmu_needs_lbr_smpl()
to perf_event.h, while another commit (a46a2300019 "perf: Simplify the
branch stack check") removed it in favor of needs_branch_stack().
This patch gets rid of intel_pmu_needs_lbr_smpl() for good.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: adrian.hunter@intel.com
Cc: hpa@zytor.com
Link: http://lkml.kernel.org/r/1435140349-32588-3-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Both intel_pmu_enable_bts() and intel_pmu_disable_bts() are in perf_event.h
header file, no need to have them declared again in the driver.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: adrian.hunter@intel.com
Cc: hpa@zytor.com
Link: http://lkml.kernel.org/r/1435140349-32588-2-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Haswell and Broadwell have the same uncore CBOX/ARB PMU as Sandy Bridge.
Add the respective model numbers to enable the SNB uncore PMU.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: eranian@google.com
Cc: kan.liang@intel.com
Link: http://lkml.kernel.org/r/1434347862-28490-2-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Add a new "ARB" uncore PMU that is used to monitor the uncore queue
arbiter. This is useful to measure uncore queue occupancy and similar
statistics. The registers all have the same format as the
existing CBOX PMU.
Also move the event constraints from the CBOX to ARB. The 0x80+
events are ARB events and cannot be scheduled on a CBOX PMU.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: eranian@google.com
Cc: kan.liang@intel.com
Link: http://lkml.kernel.org/r/1434347862-28490-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The DEFINE_PCI_DEVICE_TABLE() macro is deprecated. Use
'struct pci_device_id' instead of DEFINE_PCI_DEVICE_TABLE(),
with the goal of getting rid of this macro completely.
This Coccinelle semantic patch performs this transformation:
@@
identifier a;
declarer name DEFINE_PCI_DEVICE_TABLE;
initializer i;
@@
- DEFINE_PCI_DEVICE_TABLE(a)
+ const struct pci_device_id a[] = i;
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150717052759.GA6265@vaishali-Ideapad-Z570
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
