| Age | Commit message (Collapse) | Author |
|---|
|
In blamed commit, I missed that get_dist_table() was allocating
memory using GFP_KERNEL, and acquiring qdisc lock to perform
the swap of newly allocated table with current one.
In this patch, get_dist_table() is allocating memory and
copy user data before we acquire the qdisc lock.
Then we perform swap operations while being protected by the lock.
Note that after this patch netem_change() no longer can do partial changes.
If an error is returned, qdisc conf is left unchanged.
Fixes: 2174a08db80d ("sch_netem: acquire qdisc lock in netem_change()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230622181503.2327695-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-06-22 (iavf)
This series contains updates to iavf driver only.
Przemek defers removing, previous, primary MAC address until after
getting result of adding its replacement. He also does some cleanup by
removing unused functions and making applicable functions static.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
iavf: make functions static where possible
iavf: remove some unused functions and pointless wrappers
iavf: fix err handling for MAC replace
====================
Link: https://lore.kernel.org/r/20230622165914.2203081-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The referenced patch is causing build errors when ETHERNET=y and
FDDI=m. While we work out the preferred patch(es), revert this patch
to make the pain go away.
Fixes: 128272336120 ("s390/net: lcs: use IS_ENABLED() for kconfig detection")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: lore.kernel.org/r/202306202129.pl0AqK8G-lkp@intel.com
Cc: Alexandra Winter <wintera@linux.ibm.com>
Cc: Wenjia Zhang <wenjia@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230622155409.27311-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Linux provides phy_set_bits() helper so let's drop brcm_phy_setbits() and
use phy_set_bits() in its place.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230622184721.24368-1-giulio.benetti@benettiengineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
igc: TX timestamping fixes
This is the fixes part of the series intended to add support for using
the 4 timestamp registers present in i225/i226.
Moving the timestamp handling to be inline with the interrupt handling
has the advantage of improving the TX timestamping retrieval latency,
here are some numbers using ntpperf:
Before:
$ sudo ./ntpperf -i enp3s0 -m 10:22:22:22:22:21 -d 192.168.1.3 -s 172.18.0.0/16 -I -H -o -37
| responses | TX timestamp offset (ns)
rate clients | lost invalid basic xleave | min mean max stddev
1000 100 0.00% 0.00% 0.00% 100.00% -56 +9 +52 19
1500 150 0.00% 0.00% 0.00% 100.00% -40 +30 +75 22
2250 225 0.00% 0.00% 0.00% 100.00% -11 +29 +72 15
3375 337 0.00% 0.00% 0.00% 100.00% -18 +40 +88 22
5062 506 0.00% 0.00% 0.00% 100.00% -19 +23 +77 15
7593 759 0.00% 0.00% 0.00% 100.00% +7 +47 +5168 43
11389 1138 0.00% 0.00% 0.00% 100.00% -11 +41 +5240 39
17083 1708 0.00% 0.00% 0.00% 100.00% +19 +60 +5288 50
25624 2562 0.00% 0.00% 0.00% 100.00% +1 +56 +5368 58
38436 3843 0.00% 0.00% 0.00% 100.00% -84 +12 +8847 66
57654 5765 0.00% 0.00% 100.00% 0.00%
86481 8648 0.00% 0.00% 100.00% 0.00%
129721 12972 0.00% 0.00% 100.00% 0.00%
194581 16384 0.00% 0.00% 100.00% 0.00%
291871 16384 27.35% 0.00% 72.65% 0.00%
437806 16384 50.05% 0.00% 49.95% 0.00%
After:
$ sudo ./ntpperf -i enp3s0 -m 10:22:22:22:22:21 -d 192.168.1.3 -s 172.18.0.0/16 -I -H -o -37
| responses | TX timestamp offset (ns)
rate clients | lost invalid basic xleave | min mean max stddev
1000 100 0.00% 0.00% 0.00% 100.00% -44 +0 +61 19
1500 150 0.00% 0.00% 0.00% 100.00% -6 +39 +81 16
2250 225 0.00% 0.00% 0.00% 100.00% -22 +25 +69 15
3375 337 0.00% 0.00% 0.00% 100.00% -28 +15 +56 14
5062 506 0.00% 0.00% 0.00% 100.00% +7 +78 +143 27
7593 759 0.00% 0.00% 0.00% 100.00% -54 +24 +144 47
11389 1138 0.00% 0.00% 0.00% 100.00% -90 -33 +28 21
17083 1708 0.00% 0.00% 0.00% 100.00% -50 -2 +35 14
25624 2562 0.00% 0.00% 0.00% 100.00% -62 +7 +66 23
38436 3843 0.00% 0.00% 0.00% 100.00% -33 +30 +5395 36
57654 5765 0.00% 0.00% 100.00% 0.00%
86481 8648 0.00% 0.00% 100.00% 0.00%
129721 12972 0.00% 0.00% 100.00% 0.00%
194581 16384 19.50% 0.00% 80.50% 0.00%
291871 16384 35.81% 0.00% 64.19% 0.00%
437806 16384 55.40% 0.00% 44.60% 0.00%
During this series, and to show that as is always the case, things are
never easy as they should be, a hardware issue was found, and it took
some time to find the workaround(s). The bug and workaround are better
explained in patch 4/4.
Note: the workaround has a simpler alternative, but it would involve
adding support for the other timestamp registers, and only using the
TXSTMP{H/L}_0 as a way to clear the interrupt. But I feel bad about
throwing this kind of resources away. Didn't test this extensively but
it should work.
Also, as Marc Kleine-Budde suggested, after some consensus is reached
on this series, most parts of it will be proposed for igb.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: Work around HW bug causing missing timestamps
igc: Retrieve TX timestamp during interrupt handling
igc: Check if hardware TX timestamping is enabled earlier
igc: Fix race condition in PTP tx code
====================
Link: https://lore.kernel.org/r/20230622165244.2202786-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-06-23
We've added 49 non-merge commits during the last 24 day(s) which contain
a total of 70 files changed, 1935 insertions(+), 442 deletions(-).
The main changes are:
1) Extend bpf_fib_lookup helper to allow passing the route table ID,
from Louis DeLosSantos.
2) Fix regsafe() in verifier to call check_ids() for scalar registers,
from Eduard Zingerman.
3) Extend the set of cpumask kfuncs with bpf_cpumask_first_and()
and a rework of bpf_cpumask_any*() kfuncs. Additionally,
add selftests, from David Vernet.
4) Fix socket lookup BPF helpers for tc/XDP to respect VRF bindings,
from Gilad Sever.
5) Change bpf_link_put() to use workqueue unconditionally to fix it
under PREEMPT_RT, from Sebastian Andrzej Siewior.
6) Follow-ups to address issues in the bpf_refcount shared ownership
implementation, from Dave Marchevsky.
7) A few general refactorings to BPF map and program creation permissions
checks which were part of the BPF token series, from Andrii Nakryiko.
8) Various fixes for benchmark framework and add a new benchmark
for BPF memory allocator to BPF selftests, from Hou Tao.
9) Documentation improvements around iterators and trusted pointers,
from Anton Protopopov.
10) Small cleanup in verifier to improve allocated object check,
from Daniel T. Lee.
11) Improve performance of bpf_xdp_pointer() by avoiding access
to shared_info when XDP packet does not have frags,
from Jesper Dangaard Brouer.
12) Silence a harmless syzbot-reported warning in btf_type_id_size(),
from Yonghong Song.
13) Remove duplicate bpfilter_umh_cleanup in favor of umd_cleanup_helper,
from Jarkko Sakkinen.
14) Fix BPF selftests build for resolve_btfids under custom HOSTCFLAGS,
from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (49 commits)
bpf, docs: Document existing macros instead of deprecated
bpf, docs: BPF Iterator Document
selftests/bpf: Fix compilation failure for prog vrf_socket_lookup
selftests/bpf: Add vrf_socket_lookup tests
bpf: Fix bpf socket lookup from tc/xdp to respect socket VRF bindings
bpf: Call __bpf_sk_lookup()/__bpf_skc_lookup() directly via TC hookpoint
bpf: Factor out socket lookup functions for the TC hookpoint.
selftests/bpf: Set the default value of consumer_cnt as 0
selftests/bpf: Ensure that next_cpu() returns a valid CPU number
selftests/bpf: Output the correct error code for pthread APIs
selftests/bpf: Use producer_cnt to allocate local counter array
xsk: Remove unused inline function xsk_buff_discard()
bpf: Keep BPF_PROG_LOAD permission checks clear of validations
bpf: Centralize permissions checks for all BPF map types
bpf: Inline map creation logic in map_create() function
bpf: Move unprivileged checks into map_create() and bpf_prog_load()
bpf: Remove in_atomic() from bpf_link_put().
selftests/bpf: Verify that check_ids() is used for scalars in regsafe()
bpf: Verify scalar ids mapping in regsafe() using check_ids()
selftests/bpf: Check if mark_chain_precision() follows scalar ids
...
====================
Link: https://lore.kernel.org/r/20230623211256.8409-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is a small step towards a model where GUP itself would not expand
the stack, and any user that needs GUP to not look up existing mappings,
but actually expand on them, would have to do so manually before-hand,
and with the mm lock held for writing.
It turns out that execve() already did almost exactly that, except it
didn't take the mm lock at all (it's single-threaded so no locking
technically needed, but it could cause lockdep errors). And it only did
it for the CONFIG_STACK_GROWSUP case, since in that case GUP has
obviously never expanded the stack downwards.
So just make that CONFIG_STACK_GROWSUP case do the right thing with
locking, and enable it generally. This will eventually help GUP, and in
the meantime avoids a special case and the lockdep issue.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Make calls to extend_vma() and find_extend_vma() fail if the write lock
is required.
To avoid making this a flag-day event, this still allows the old
read-locking case for the trivial situations, and passes in a flag to
say "is it write-locked". That way write-lockers can say "yes, I'm
being careful", and legacy users will continue to work in all the common
cases until they have been fully converted to the new world order.
Co-Developed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is one of the simple cases, except there's no pt_regs pointer.
Which is fine, as lock_mm_and_find_vma() is set up to work fine with a
NULL pt_regs.
Powerpc already enabled LOCK_MM_AND_FIND_VMA for the main CPU faulting,
so we can just use the helper without any extra work.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This does the simple pattern conversion of alpha, arc, csky, hexagon,
loongarch, nios2, sh, sparc32, and xtensa to the lock_mm_and_find_vma()
helper. They all have the regular fault handling pattern without odd
special cases.
The remaining architectures all have something that keeps us from a
straightforward conversion: ia64 and parisc have stacks that can grow
both up as well as down (and ia64 has special address region checks).
And m68k, microblaze, openrisc, sparc64, and um end up having extra
rules about only expanding the stack down a limited amount below the
user space stack pointer. That is something that x86 used to do too
(long long ago), and it probably could just be skipped, but it still
makes the conversion less than trivial.
Note that this conversion was done manually and with the exception of
alpha without any build testing, because I have a fairly limited cross-
building environment. The cases are all simple, and I went through the
changes several times, but...
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
arm has an additional check for address < FIRST_USER_ADDRESS before
expanding the stack. Since FIRST_USER_ADDRESS is defined everywhere
(generally as 0), move that check to the generic expand_downwards().
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This converts arm64 to use the new page fault helper. It was very
straightforward, but still needed a fix for the "obvious" conversion I
initially did. Thanks to Suren for the fix and testing.
Fixed-and-tested-by: Suren Baghdasaryan <surenb@google.com>
Unnecessary-code-removal-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is done as a separate patch from introducing the new
lock_mm_and_find_vma() helper, because while it's an obvious change,
it's not what x86 used to do in this area.
We already abort the page fault on fatal signals anyway, so why should
we wait for the mmap lock only to then abort later? With the new helper
function that returns without the lock held on failure anyway, this is
particularly easy and straightforward.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
.. and make x86 use it.
This basically extracts the existing x86 "find and expand faulting vma"
code, but extends it to also take the mmap lock for writing in case we
actually do need to expand the vma.
We've historically short-circuited that case, and have some rather ugly
special logic to serialize the stack segment expansion (since we only
hold the mmap lock for reading) that doesn't match the normal VM
locking.
That slight violation of locking worked well, right up until it didn't:
the maple tree code really does want proper locking even for simple
extension of an existing vma.
So extract the code for "look up the vma of the fault" from x86, fix it
up to do the necessary write locking, and make it available as a helper
function for other architectures that can use the common helper.
Note: I say "common helper", but it really only handles the normal
stack-grows-down case. Which is all architectures except for PA-RISC
and IA64. So some rare architectures can't use the helper, but if they
care they'll just need to open-code this logic.
It's also worth pointing out that this code really would like to have an
optimistic "mmap_upgrade_trylock()" to make it quicker to go from a
read-lock (for the common case) to taking the write lock (for having to
extend the vma) in the normal single-threaded situation where there is
no other locking activity.
But that _is_ all the very uncommon special case, so while it would be
nice to have such an operation, it probably doesn't matter in reality.
I did put in the skeleton code for such a possible future expansion,
even if it only acts as pseudo-documentation for what we're doing.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is a potential OOB read at fast_imageblit, for
"colortab[(*src >> 4)]" can become a negative value due to
"const char *s = image->data, *src".
This change makes sure the index for colortab always positive
or zero.
Similar commit:
https://patchwork.kernel.org/patch/11746067
Potential bug report:
https://groups.google.com/g/syzkaller-bugs/c/9ubBXKeKXf4/m/k-QXy4UgAAAJ
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The ret variable in the vmd_enable_domain() function was used
uninitialized when printing a warning message upon failure of
the pci_reset_bus() function.
Thus, fix the issue by assigning ret with the value returned from
pci_reset_bus() before referencing it in the warning message.
This was detected by Smatch:
drivers/pci/controller/vmd.c:931 vmd_enable_domain() error: uninitialized symbol 'ret'.
[kwilczynski: drop the second patch from the series, add missing reported
by tag, commit log]
Fixes: 0a584655ef89 ("PCI: vmd: Fix secondary bus reset for Intel bridges")
Link: https://lore.kernel.org/all/202305270219.B96IiIfv-lkp@intel.com
Link: https://lore.kernel.org/linux-pci/20230420094332.1507900-2-korantwork@gmail.com
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Xinghui Li <korantli@tencent.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com>
|
|
The series 2022/2023 reports slightly longer vendor/product strings
and shares USB ids. Technically the reply size is the USB HID packet
size (64 bytes) but all the supported commands do not use more than 8
bytes and replies reporting back strings do not use more then 24 bytes
(vendor and product are in one string in the newer devices now). The
rest of the reply is always filled with '\0'. Also update comments
and documentation accordingly.
Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/ZJbB72CAPmLflhHG@monster.localdomain
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-16-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-15-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-14-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-13-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-12-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-10-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks.
The iproc driver always returns 0, it's just a bit hidden. So make
iproc_pcie_remove() return void instead of always zero and convert the
platform driver to the alternative remove callback that returns void and
eventually replaces the int returning callback.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-9-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-8-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert the dwc drivers from always returning zero in the remove
callback to the void returning variant.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
In the absence of other debug facilities dumping user code around the
unhandled exception address may help debugging the issue.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Renesas uses "R-Car" as the name for their product family and development
platform. Thus, correct other variants such as "rcar", "RCar", "Rcar",
etc., to the preferred spelling.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230607204750.27837-1-wsa+renesas@sang-engineering.com
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Commit a3eb95484f27 ("spi: dt-bindings: atmel,at91rm9200-spi: add sam9x7
compatible") adding sam9x7 compatible did not make any sense as it added
new compatible into middle of existing compatible list. The intention
was probably to add new set of compatibles with sam9x7 as first one.
Fixes: a3eb95484f27 ("spi: dt-bindings: atmel,at91rm9200-spi: add sam9x7 compatible")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/Message-Id: <20230624082054.37697-1-krzysztof.kozlowski@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Emit a warning when the mod description is missed and only
when the W=1 is enabled.
Reported-by: Roland Kletzing <devzero@web.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=10770
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Tested-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Josh Triplett reports that initramfs-tools needs modules.builtin and
modules.builtin.modinfo to create a working initramfs for a non-modular
kernel.
If this is a general tooling issue not limited to Debian, I think it
makes sense to change modules_install.
This commit changes the targets as follows when CONFIG_MODULES=n.
In-tree builds:
make modules -> no-op
make modules_install -> install modules.builtin(.modinfo)
External module builds:
make modules -> show error message like before
make modules_install -> show error message like before
Link: https://lore.kernel.org/lkml/36a4014c73a52af27d930d3ca31d362b60f4461c.1686356364.git.josh@joshtriplett.org/
Reported-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Tested-by: Josh Triplett <josh@joshtriplett.org>
|
|
Commit d4313a68ec91 ("fbdev/media: Use GPIO descriptors for VIA GPIO")
moves via-gpio.h from include/linux to drivers/video/fbdev/via, but misses
to adjust the file entry for the VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER
DRIVER section.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Remove the file entry in VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER DRIVER, as
the new location of the header is already covered by the file entry
drivers/video/fbdev/via/.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Fixes: d4313a68ec91 ("fbdev/media: Use GPIO descriptors for VIA GPIO")
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
perf_event_attr__fprintf()
When printing perf_event_attr, always display perf_event_attr config and
its symbol to improve the readability of debugging information.
Before:
# perf --debug verbose=2 record -e cycles,cpu-clock,sched:sched_switch,branch-load-misses,r101,mem:0x0 -C 0 true
<SNIP>
------------------------------------------------------------
perf_event_attr:
size 136
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 5
------------------------------------------------------------
perf_event_attr:
type 1
size 136
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 6
------------------------------------------------------------
perf_event_attr:
type 2
size 136
config 0x143
{ sample_period, sample_freq } 1
sample_type IP|TID|TIME|CPU|PERIOD|RAW|IDENTIFIER
read_format ID
disabled 1
inherit 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 7
------------------------------------------------------------
perf_event_attr:
type 3
size 136
config 0x10005
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 9
------------------------------------------------------------
perf_event_attr:
type 4
size 136
config 0x101
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 10
------------------------------------------------------------
perf_event_attr:
type 5
size 136
{ sample_period, sample_freq } 1
sample_type IP|TID|TIME|CPU|IDENTIFIER
read_format ID
disabled 1
inherit 1
sample_id_all 1
exclude_guest 1
bp_type 3
{ bp_len, config2 } 0x4
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 11
<SNIP>
After:
# perf --debug verbose=2 record -e cycles,cpu-clock,sched:sched_switch,branch-load-misses,r101,mem:0x0 -C 0 true
<SNIP>
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
size 136
config 0 (PERF_COUNT_HW_CPU_CYCLES)
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 5
------------------------------------------------------------
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0 (PERF_COUNT_SW_CPU_CLOCK)
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 6
------------------------------------------------------------
perf_event_attr:
type 2 (PERF_TYPE_TRACEPOINT)
size 136
config 0x143 (sched:sched_switch)
{ sample_period, sample_freq } 1
sample_type IP|TID|TIME|CPU|PERIOD|RAW|IDENTIFIER
read_format ID
disabled 1
inherit 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 7
------------------------------------------------------------
perf_event_attr:
type 3 (PERF_TYPE_HW_CACHE)
size 136
config 0x10005 (PERF_COUNT_HW_CACHE_RESULT_MISS | PERF_COUNT_HW_CACHE_OP_READ | PERF_COUNT_HW_CACHE_BPU)
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 9
------------------------------------------------------------
perf_event_attr:
type 4 (PERF_TYPE_RAW)
size 136
config 0x101
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 10
------------------------------------------------------------
perf_event_attr:
type 5 (PERF_TYPE_BREAKPOINT)
size 136
config 0
{ sample_period, sample_freq } 1
sample_type IP|TID|TIME|CPU|IDENTIFIER
read_format ID
disabled 1
inherit 1
sample_id_all 1
exclude_guest 1
bp_type 3
{ bp_len, config2 } 0x4
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 11
------------------------------------------------------------
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0x9 (PERF_COUNT_SW_DUMMY)
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
inherit 1
mmap 1
comm 1
freq 1
task 1
sample_id_all 1
mmap2 1
comm_exec 1
ksymbol 1
bpf_event 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 12
<SNIP>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: anshuman.khandual@arm.com
Cc: mark.rutland@arm.com
Cc: irogers@google.com
Cc: jesussanp@google.com
Cc: peterz@infradead.org
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Cc: alexander.shishkin@linux.intel.com
Cc: mingo@redhat.com
Link: https://lore.kernel.org/r/20230623054416.160858-5-yangjihong1@huawei.com
[ fix perf import test by adding a dummy tracepoint_id__to_name() ]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
perf_event_attr__fprintf()
When printing perf_event_attr, always display perf_event_attr type and
its symbol to improve the readability of debugging information.
Before:
# perf --debug verbose=2 record -e cycles,cpu-clock,sched:sched_switch,branch-load-misses,r101,mem:0x0 -C 0 true
<SNIP>
------------------------------------------------------------
perf_event_attr:
size 136
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 5
------------------------------------------------------------
perf_event_attr:
type 1
size 136
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 6
------------------------------------------------------------
perf_event_attr:
type 2
size 136
config 0x143
{ sample_period, sample_freq } 1
sample_type IP|TID|TIME|CPU|PERIOD|RAW|IDENTIFIER
read_format ID
disabled 1
inherit 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 7
------------------------------------------------------------
perf_event_attr:
type 3
size 136
config 0x10005
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 9
------------------------------------------------------------
perf_event_attr:
type 4
size 136
config 0x101
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 10
------------------------------------------------------------
perf_event_attr:
type 5
size 136
{ sample_period, sample_freq } 1
sample_type IP|TID|TIME|CPU|IDENTIFIER
read_format ID
disabled 1
inherit 1
sample_id_all 1
exclude_guest 1
bp_type 3
{ bp_len, config2 } 0x4
------------------------------------------------------------
<SNIP>
After:
# perf --debug verbose=2 record -e cycles,cpu-clock,sched:sched_switch,branch-load-misses,r101,mem:0x0 -C 0 true
<SNIP>
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
size 136
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 5
------------------------------------------------------------
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 6
------------------------------------------------------------
perf_event_attr:
type 2 (PERF_TYPE_TRACEPOINT)
size 136
config 0x143
{ sample_period, sample_freq } 1
sample_type IP|TID|TIME|CPU|PERIOD|RAW|IDENTIFIER
read_format ID
disabled 1
inherit 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 7
------------------------------------------------------------
perf_event_attr:
type 3 (PERF_TYPE_HW_CACHE)
size 136
config 0x10005
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 9
------------------------------------------------------------
perf_event_attr:
type 4 (PERF_TYPE_RAW)
size 136
config 0x101
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 10
------------------------------------------------------------
perf_event_attr:
type 5 (PERF_TYPE_BREAKPOINT)
size 136
{ sample_period, sample_freq } 1
sample_type IP|TID|TIME|CPU|IDENTIFIER
read_format ID
disabled 1
inherit 1
sample_id_all 1
exclude_guest 1
bp_type 3
{ bp_len, config2 } 0x4
------------------------------------------------------------
<SNIP>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: anshuman.khandual@arm.com
Cc: mark.rutland@arm.com
Cc: irogers@google.com
Cc: jesussanp@google.com
Cc: peterz@infradead.org
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Cc: alexander.shishkin@linux.intel.com
Cc: mingo@redhat.com
Link: https://lore.kernel.org/r/20230623054416.160858-4-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
When printing attr, members whose value is 0 will not be printed, we want
to print the case where attr->type is 0(PERF_TYPE_HARDWARE), add `_a`
param to PRINT_ATTRf macro to always print member when it is true
No functional change.
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: anshuman.khandual@arm.com
Cc: mark.rutland@arm.com
Cc: irogers@google.com
Cc: jesussanp@google.com
Cc: peterz@infradead.org
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Cc: alexander.shishkin@linux.intel.com
Cc: mingo@redhat.com
Link: https://lore.kernel.org/r/20230623054416.160858-3-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add tracepoint_id_to_name() helper to search for the trace events directory
by given event id and return the corresponding tracepoint.
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: anshuman.khandual@arm.com
Cc: mark.rutland@arm.com
Cc: irogers@google.com
Cc: jesussanp@google.com
Cc: peterz@infradead.org
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Cc: alexander.shishkin@linux.intel.com
Cc: mingo@redhat.com
Link: https://lore.kernel.org/r/20230623054416.160858-2-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The netif_rx() function frees the skb so we can't dereference it to
save the skb->len.
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Link: https://lore.kernel.org/r/tencent_3B3D24B66ED66A6BB73CC0E63C6A14E45109@qq.com
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
Previously used to specify symbol_name_rb_node was in use.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Jason Wang <wangborong@cdjrlc.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20230623054520.4118442-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Most perf commands want to sort symbols by name and this is done via
an invasive rbtree that on 64-bit systems costs 24 bytes. Sorting the
symbols in a DSO by name is optional and not done by default, however,
if sorting is requested the 24 bytes is allocated for every
symbol.
This change removes the rbtree and uses a sorted array of symbol
pointers instead (costing 8 bytes per symbol). As the array is created
on demand then there are further memory savings. The complexity of
sorting the array and using the rbtree are the same.
To support going to the next symbol, the index of the current symbol
needs to be passed around as a pair with the current symbol. This
requires some API changes.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Jason Wang <wangborong@cdjrlc.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20230623054520.4118442-3-irogers@google.com
[ minimize change in symbols__sort_by_name() ]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Determine if symbols are sorted, set the sorted flag and sort under
the dso lock. Done in the interest of thread safety.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Jason Wang <wangborong@cdjrlc.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20230623054520.4118442-2-irogers@google.com
[ handle the similar code in util/probe-event.c ]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
If generating vmlinux.h, make the code to generate it more tolerant by
filtering out paths to kernels that lack a .BTF section.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230623041405.4039475-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
