summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-06-23dt-bindings: pwm: restrict node name suffixesKrzysztof Kozlowski
Make the pattern matching node names a bit stricter to improve DTS consistency. The pattern is restricted to: 1. Only one unit address or one -N suffix, 2. -N suffixes to decimal numbers. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23pwm: pca9685: Switch i2c driver back to use .probe()Uwe Kleine-König
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23pwm: ab8500: Fix error code in probe()Dan Carpenter
This code accidentally return positive EINVAL instead of negative -EINVAL. Fixes: eb41f334589d ("pwm: ab8500: Fix register offset calculation to not depend on probe order") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23MAINTAINERS: add pwm to PolarFire SoC entryConor Dooley
Add the newly introduced pwm driver to the existing PolarFire SoC entry. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23pwm: add microchip soft ip corePWM driverConor Dooley
Add a driver that supports the Microchip FPGA "soft" PWM IP core. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23pwm: sysfs: Do not apply state to already disabled PWMsMarek Vasut
If the PWM is exported but not enabled, do not call pwm_class_apply_state(). First of all, in this case, period may still be unconfigured and this would make pwm_class_apply_state() return -EINVAL, and then suspend would fail. Second, it makes little sense to apply state onto PWM that is not enabled before suspend. Failing case: " $ echo 1 > /sys/class/pwm/pwmchip4/export $ echo mem > /sys/power/state ... pwm pwmchip4: PM: dpm_run_callback(): pwm_class_suspend+0x1/0xa8 returns -22 pwm pwmchip4: PM: failed to suspend: error -22 PM: Some devices failed to suspend, or early wake event detected " Working case: " $ echo 1 > /sys/class/pwm/pwmchip4/export $ echo 100 > /sys/class/pwm/pwmchip4/pwm1/period $ echo 10 > /sys/class/pwm/pwmchip4/pwm1/duty_cycle $ echo mem > /sys/power/state ... " Do not call pwm_class_apply_state() in case the PWM is disabled to fix this issue. Fixes: 7fd4edc57bbae ("pwm: sysfs: Add suspend/resume support") Signed-off-by: Marek Vasut <marex@denx.de> Fixes: ef2bf4997f7d ("pwm: Improve args checking in pwm_apply_state()") Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23pwm: imx-tpm: force 'real_period' to be zero in suspendFancy Fang
During suspend, all the tpm registers will lose values. So the 'real_period' value of struct 'imx_tpm_pwm_chip' should be forced to be zero to force the period update code can be executed after system resume back. Signed-off-by: Fancy Fang <chen.fang@nxp.com> Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 738a1cfec2ed ("pwm: Add i.MX TPM PWM driver support") Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23pwm: meson: make full use of common clock frameworkHeiner Kallweit
Newer versions of the PWM block use a core clock with external mux, divider, and gate. These components either don't exist any longer in the PWM block, or they are bypassed. To minimize needed changes for supporting the new version, the internal divider and gate should be handled by CCF too. I didn't see a good way to split the patch, therefore it's somewhat bigger. What it does: - The internal mux is handled by CCF already. Register also internal divider and gate with CCF, so that we have one representation of the input clock: [mux] parent of [divider] parent of [gate] - Now that CCF selects an appropriate mux parent, we don't need the DT-provided default parent any longer. Accordingly we can also omit setting the mux parent directly in the driver. - Instead of manually handling the pre-div divider value, let CCF set the input clock. Targeted input clock frequency is 0xffff * 1/period for best precision. - For the "inverted pwm disabled" scenario target an input clock frequency of ULONG_MAX. This ensures that the remaining low pulses have minimum length. I don't have hw with the old PWM block, therefore I couldn't test this patch. With the not yet included extension for the new PWM block (channel->clk coming directly from get_clk(external_clk)) I didn't notice any problem. My system uses PWM for the CPU voltage regulator and for the SDIO 32kHz clock. Note: The clock gate in the old PWM block is permanently disabled. This seems to indicate that it's not used by the new PWM block. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23pwm: meson: don't use hdmi/video clock as mux parentHeiner Kallweit
The meson_vclk code from the display driver may change the rate of the video clock. Therefore better don't use it as pwm mux parent. After removing this clock from the parent list pwm_gxbb_data and pwm_g12a_ee_data are the same as pwm_meson8b_data. So we can remove them. Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23pwm: meson: switch to using struct clk_parent_data for mux parentsHeiner Kallweit
We'll use struct clk_parent_data for mux/div/gate initialization in the follow-up patches. As a first step switch the mux from using parent_names to clk_parent_data. Suggested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23pwm: meson: remove not needed check in meson_pwm_calcHeiner Kallweit
period >= duty implies that cnt >= duty_cnt. We verified before that cnt <= 0xffff, therefore we can omit the check here. Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23pwm: meson: fix handling of period/duty if greater than UINT_MAXHeiner Kallweit
state->period/duty are of type u64, and if their value is greater than UINT_MAX, then the cast to uint will cause problems. Fix this by changing the type of the respective local variables to u64. Fixes: b79c3670e120 ("pwm: meson: Don't duplicate the polarity internally") Cc: stable@vger.kernel.org Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23pwm: meson: modify and simplify calculation in meson_pwm_get_stateHeiner Kallweit
I don't see a reason why we should treat the case lo < hi differently and return 0 as period and duty_cycle. The current logic was added with c375bcbaabdb ("pwm: meson: Read the full hardware state in meson_pwm_get_state()"), Martin as original author doesn't remember why it was implemented this way back then. So let's handle it as normal use case and also remove the optimization for lo == 0. I think the improved readability is worth it. Fixes: c375bcbaabdb ("pwm: meson: Read the full hardware state in meson_pwm_get_state()") Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23dt-bindings: pwm: Add R-Car V3U device tree bindingsWolfram Sang
Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23dt-bindings: pwm: imx: add i.MX8QXP compatibleAlexander Stein
i.MX8QXP compatible is missing in the list, add it. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23pwm: mediatek: Add support for MT7981Daniel Golle
The PWM unit on MT7981 uses different register offsets than previous MediaTek PWM units. Add support for these new offsets and add support for PWM on MT7981 which has 3 PWM channels, one of them is typically used for a temperature controlled fan. While at it, also reorder pwm_mediatek_of_data entries to restore alphabetic order. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23dt-bindings: pwm: mediatek: Add mediatek,mt7981 compatibleDaniel Golle
Add compatible string for the PWM unit found of the MediaTek MT7981 SoC. This is in preparation to adding support in the pwm-mediatek.c driver. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23pwm: sifive: Simplify using devm_clk_get_prepared()Uwe Kleine-König
Instead of preparing the clk after it was requested and unpreparing in .probe()'s error path and .remove(), use devm_clk_get_prepared() which copes for unpreparing automatically. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23pwm: clk: Use the devm_clk_get_prepared() helper functionChristophe JAILLET
Use the devm_clk_get_prepared() helper function instead of hand-writing it. It saves some line of codes. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23MIPS: OCTEON: octeon-usb: cleanup divider calculationLadislav Michl
Simple self-contained function is easier to review. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-06-23MIPS: OCTEON: octeon-usb: introduce dwc3_octeon_{read,write}qLadislav Michl
Move all register access code into separate functions and provide their no-op version for non Octeon platforms. Later it might be possible to replace them with standard Linux functions, however datasheets are not publicly available and I have only one Octeon board to test, so lets stay on safe side for now. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-06-23MIPS: OCTEON: octeon-usb: move gpio config to separate functionLadislav Michl
Power gpio configuration is using Octeon specific code, so move it to separate function, that can later be guarded with ifdefs. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-06-23MIPS: OCTEON: octeon-usb: use bitfields for shim registerLadislav Michl
Use Linux standard bitfield access macros to manipulate shim register. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-06-23MIPS: OCTEON: octeon-usb: use bitfields for host config registerLadislav Michl
Use Linux standard bitfield access macros to manipulate host config register. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-06-23MIPS: OCTEON: octeon-usb: use bitfields for control registerLadislav Michl
Code needs to compile for all platforms in order to move it to drivers/usb/dwc3. Use Linux standard bitfield access macros to manipulate control register. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-06-23MIPS: OCTEON: octeon-usb: add all register offsetsLadislav Michl
Glue code uses a mix of offset and absolute address register definition. Define all of them as offsets and use them consistently. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-06-23mips: ralink: match all supported system controller compatible stringsShiji Yang
Recently, A new clock and reset controller driver has been introduced to the ralink mips target[1]. It provides proper system control and adds more SoC specific compatible strings. In order to better initialize CPUs, this patch removes the outdated "ralink,mt7620a-sysc" and add all dt-binding documented compatible strings to the system controller match table. [1] https://lore.kernel.org/all/20230619040941.1340372-1-sergio.paracuellos@gmail.com/ Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-06-23MIPS: dec: prom: Address -Warray-bounds warningGustavo A. R. Silva
Zero-length arrays are deprecated, and we are replacing them with flexible array members instead. So, replace zero-length array with flexible-array member in struct memmap. Address the following warning found after building (with GCC-13) mips64 with decstation_64_defconfig: In function 'rex_setup_memory_region', inlined from 'prom_meminit' at arch/mips/dec/prom/memory.c:91:3: arch/mips/dec/prom/memory.c:72:31: error: array subscript i is outside array bounds of 'unsigned char[0]' [-Werror=array-bounds=] 72 | if (bm->bitmap[i] == 0xff) | ~~~~~~~~~~^~~ In file included from arch/mips/dec/prom/memory.c:16: ./arch/mips/include/asm/dec/prom.h: In function 'prom_meminit': ./arch/mips/include/asm/dec/prom.h:73:23: note: while referencing 'bitmap' 73 | unsigned char bitmap[0]; This helps with the ongoing efforts to globally enable -Warray-bounds. This results in no differences in binary output. Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/323 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-06-23MIPS: DTS: CI20: Raise VDDCORE voltage to 1.125 voltsPaul Cercueil
Commit 08384e80a70f ("MIPS: DTS: CI20: Fix ACT8600 regulator node names") caused the VDDCORE power supply (regulated by the ACT8600's DCDC1 output) to drop from a voltage of 1.2V configured by the bootloader, to the 1.1V set in the Device Tree. According to the documentation, the VDDCORE supply should be between 0.99V and 1.21V; both values are therefore within the supported range. However, VDDCORE being 1.1V results in the CI20 being very unstable, with corrupted memory, failures to boot, or reboots at random. The reason might be succint drops of the voltage below the minimum required. Raising the minimum voltage to 1.125 volts seems to be enough to address this issue, while still keeping a relatively low core voltage which helps for power consumption and thermals. Fixes: 08384e80a70f ("MIPS: DTS: CI20: Fix ACT8600 regulator node names") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-06-23clk: ralink: mtmips: Fix uninitialized use of ret in ↵Nathan Chancellor
mtmips_register_{fixed,factor}_clocks() Clang warns: drivers/clk/ralink/clk-mtmips.c:309:9: error: variable 'ret' is uninitialized when used here [-Werror,-Wuninitialized] 309 | return ret; | ^~~ drivers/clk/ralink/clk-mtmips.c:285:9: note: initialize the variable 'ret' to silence this warning 285 | int ret, i; | ^ | = 0 drivers/clk/ralink/clk-mtmips.c:359:9: error: variable 'ret' is uninitialized when used here [-Werror,-Wuninitialized] 359 | return ret; | ^~~ drivers/clk/ralink/clk-mtmips.c:335:9: note: initialize the variable 'ret' to silence this warning 335 | int ret, i; | ^ | = 0 2 errors generated. Set ret to the return value of clk_hw_register_fixed_rate() using the PTR_ERR() macro, which ensures ret is not used uninitialized, clearing up the warning. Fixes: 6f3b15586eef ("clk: ralink: add clock and reset driver for MTMIPS SoCs") Closes: https://github.com/ClangBuiltLinux/linux/issues/1879 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-06-23Merge tag 'at24-updates-for-v6.5' of ↵Wolfram Sang
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-mergewindow at24 updates for v6.5 - use dev_err_probe() where applicable
2023-06-23i2c: imx-lpi2c: fix type char overflow issue when calculating the clock cycleClark Wang
Claim clkhi and clklo as integer type to avoid possible calculation errors caused by data overflow. Fixes: a55fa9d0e42e ("i2c: imx-lpi2c: add low power i2c bus driver") Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Signed-off-by: Carlos Song <carlos.song@nxp.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-06-23i2c: qup: Add missing unwind goto in qup_i2c_probe()Shuai Jiang
Smatch Warns: drivers/i2c/busses/i2c-qup.c:1784 qup_i2c_probe() warn: missing unwind goto? The goto label "fail_runtime" and "fail" will disable qup->pclk, but here qup->pclk failed to obtain, in order to be consistent, change the direct return to goto label "fail_dma". Fixes: 9cedf3b2f099 ("i2c: qup: Add bam dma capabilities") Signed-off-by: Shuai Jiang <d202180596@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Cc: <stable@vger.kernel.org> # v4.6+
2023-06-23dt-bindings: i2c: opencores: Add missing type for "regstep"Rob Herring
"regstep" may be deprecated, but it still needs a type. Fixes: 8ad69f490516 ("dt-bindings: i2c: convert ocores binding to yaml") Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Peter Korsgaard <peter@korsgaard.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-06-23dt-bindings: net: altr,tse: Fix error in "compatible" conditional schemaRob Herring
The conditional if/then schema has an error as the "enum" values have "const" in them. Drop the "const". Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230621231012.3816139-1-robh@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-23i2c: uniphier: Use devm_clk_get_enabled()Andi Shyti
Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled(). Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-06-23i2c: uniphier-f: Use devm_clk_get_enabled()Andi Shyti
Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled(). Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-06-23i2c: owl: Use devm_clk_get_enabled()Andi Shyti
Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled(). Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-06-23i2c: lpc2k: Use devm_clk_get_enabled()Andi Shyti
Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled(). Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-06-23of: unittest: drop assertions for GPIO hog messagesBartosz Golaszewski
These have now been demoted to debug and are normally hidden. Drop the assertions entirely. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Rob Herring <robh@kernel.org>
2023-06-23i2c: hix5hd2: Use devm_clk_get_enabled()Andi Shyti
Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled(). Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-06-23ASoC: amd: update pm_runtime enable sequenceArun Gopal Kondaveeti
pm_runtime_allow() is not needed for ACP child platform devices. Replace pm_runtime_allow() with pm_runtime_mark_last_busy() & pm_runtime_set_active() in pm_runtime enable sequence for ACP child platform drivers. Signed-off-by: Arun Gopal <arungopal.kondaveeti@amd.com> Link: https://lore.kernel.org/r/Message-Id: <20230623214150.4058721-1-arungopal.kondaveeti@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-23spi: Add support for Renesas CSIFabrizio Castro
The RZ/V2M SoC comes with the Clocked Serial Interface (CSI) IP, which is a master/slave SPI controller. This commit adds a driver to support CSI master mode. Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Link: https://lore.kernel.org/r/Message-Id: <20230622113341.657842-4-fabrizio.castro.jz@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-23spi: dt-bindings: Add bindings for RZ/V2M CSIFabrizio Castro
Add dt-bindings for the CSI IP found inside the RZ/V2M SoC. Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/Message-Id: <20230622113341.657842-2-fabrizio.castro.jz@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-23i2c: sun6i-p2wi: Use devm_clk_get_enabled()Andi Shyti
Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled(). Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-06-23leds: leds-mt6323: Adjust return/parameter types in wled get/set callbacksNathan Chancellor
Clang's kernel Control Flow Integrity (kCFI) is a compiler-based security mitigation that ensures the target of an indirect function call matches the expected type of the call and trapping if they do not match exactly. The warning -Wincompatible-function-pointer-types-strict aims to catch these issues at compile time, which reveals: drivers/leds/leds-mt6323.c:598:49: error: incompatible function pointer types assigning to 'int (*)(struct led_classdev *, enum led_brightness)' from 'int (struct led_classdev *, unsigned int)' [-Werror,-Wincompatible-function-pointer-types-strict] 598 | leds->led[reg]->cdev.brightness_set_blocking = | ^ 599 | mt6323_wled_set_brightness; | ~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/leds/leds-mt6323.c:600:40: error: incompatible function pointer types assigning to 'enum led_brightness (*)(struct led_classdev *)' from 'unsigned int (struct led_classdev *)' [-Werror,-Wincompatible-function-pointer-types-strict] 600 | leds->led[reg]->cdev.brightness_get = | ^ 601 | mt6323_get_wled_brightness; | ~~~~~~~~~~~~~~~~~~~~~~~~~~ 2 errors generated. While 'unsigned int' is ABI compatible with 'enum led_brightness' (hence no warning from -Wincompatible-function-pointer-types) and the callers of these callbacks use/pass the values as 'unsigned int', the mismatch between the prototype and the called function will trip kCFI at runtime. Change the types in the implementations to match the prototypes, clearing up the warning and avoiding kCFI failures. Fixes: 9bb0a9e0626c ("leds: leds-mt6323: Add support for WLEDs and MT6332") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230622-mt6323-wled-wincompatible-function-pointer-types-strict-v1-1-6ad256f220e8@kernel.org Signed-off-by: Lee Jones <lee@kernel.org>
2023-06-23i2c: pasemi-platform: Use devm_clk_get_enabled()Andi Shyti
Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled(). Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-06-23i2c: mt7621: Use devm_clk_get_enabled()Andi Shyti
Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled(). Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-06-23Merge branch 's390-net-updates-2023-06-10'Paolo Abeni
Alexandra Winter says: ==================== s390/net: updates 2023-06-10 Please apply the following patch series for s390's ctcm and lcs drivers to netdev's net-next tree. Just maintenance patches, no functional changes. ==================== Link: https://lore.kernel.org/r/20230621134921.904217-1-wintera@linux.ibm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-23s390/ctcm: Convert sprintf/snprintf to scnprintfThorsten Winkler
This LWN article explains the why scnprintf is preferred over snprintf in general https://lwn.net/Articles/69419/ Ie. snprintf() returns what *would* be the resulting length, while scnprintf() returns the actual length. Note that ctcm_print_statistics() writes the data into the kernel log and is therefore not suitable for sysfs_emit(). Observable behavior is not changed, as there may be dependencies. Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-16 22:44:59 +0000