summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-03-07platform/x86: ISST: Increase range of valid mail box commandsSrinivas Pandruvada
A new command CONFIG_TDP_GET_RATIO_INFO is added, with sub command type of 0x0C. The previous range of valid sub commands was from 0x00 to 0x0B. Change the valid range from 0x00 to 0x0C. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20230227053504.2734214-1-srinivas.pandruvada@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2023-03-07platform/x86: dell-ddv: Fix temperature scalingArmin Wolf
After using the built-in UEFI hardware diagnostics to compare the measured battery temperature, i noticed that the temperature is actually expressed in tenth degree kelvin, similar to the SBS-Data standard. For example, a value of 2992 is displayed as 26 degrees celsius. Fix the scaling so that the correct values are being displayed. Tested on a Dell Inspiron 3505. Fixes: a77272c16041 ("platform/x86: dell: Add new dell-wmi-ddv driver") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20230218115318.20662-2-W_Armin@gmx.de Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2023-03-07platform/x86: dell-ddv: Fix cache invalidation on resumeArmin Wolf
If one or both sensor buffers could not be initialized, either due to missing hardware support or due to some error during probing, the resume handler will encounter undefined behaviour when attempting to lock buffers then protected by an uninitialized or destroyed mutex. Fix this by introducing a "active" flag which is set during probe, and only invalidate buffers which where flaged as "active". Tested on a Dell Inspiron 3505. Fixes: 3b7eeff93d29 ("platform/x86: dell-ddv: Add hwmon support") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20230218115318.20662-1-W_Armin@gmx.de Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2023-03-07platform/x86/amd: pmc: remove CONFIG_SUSPEND checksArnd Bergmann
The amd_pmc_write_stb() function was previously hidden in an ifdef to avoid a warning when CONFIG_SUSPEND is disabled, but now there is an additional caller: drivers/platform/x86/amd/pmc.c: In function 'amd_pmc_stb_debugfs_open_v2': drivers/platform/x86/amd/pmc.c:256:8: error: implicit declaration of function 'amd_pmc_write_stb'; did you mean 'amd_pmc_read_stb'? [-Werror=implicit-function-declaration] 256 | ret = amd_pmc_write_stb(dev, AMD_PMC_STB_DUMMY_PC); | ^~~~~~~~~~~~~~~~~ | amd_pmc_read_stb There is now an easier way to handle this using DEFINE_SIMPLE_DEV_PM_OPS() to replace all the #ifdefs, letting gcc drop any of the unused functions silently. Fixes: b0d4bb973539 ("platform/x86/amd: pmc: Write dummy postcode into the STB DRAM") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230214152512.806188-1-arnd@kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2023-03-07wifi: nl80211: Add support for randomizing TA of auth and deauth framesVeerendranath Jakkam
Add support to use a random local address in authentication and deauthentication frames sent to unassociated peer when the driver supports. The driver needs to configure receive behavior to accept frames with random transmit address specified in TX path authentication frames during the time of the frame exchange is pending and such frames need to be acknowledged similarly to frames sent to the local permanent address when this random address functionality is used. This capability allows use of randomized transmit address for PASN authentication frames to improve privacy of WLAN clients. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20230112012415.167556-2-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: mac80211: add LDPC related flags in ieee80211_bss_confRyder Lee
This is utilized to pass LDPC configurations from user space (i.e. hostapd) to driver. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Link: https://lore.kernel.org/r/1de696aaa34efd77a926eb657b8c0fda05aaa177.1676628065.git.ryder.lee@mediatek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: mac80211: add EHT MU-MIMO related flags in ieee80211_bss_confRyder Lee
Similar to VHT/HE. This is utilized to pass MU-MIMO configurations from user space (i.e. hostapd) to driver. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Link: https://lore.kernel.org/r/8d9966c4c1e77cb1ade77d42bdc49905609192e9.1676628065.git.ryder.lee@mediatek.com [move into combined if statement, reset on !eht] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: mac80211: introduce ieee80211_refresh_tx_agg_session_timer()Ryder Lee
This allows low level drivers to refresh the tx agg session timer, based on querying stats from the firmware usually. Especially for some mt76 devices support .net_fill_forward_path would bypass mac80211, which leads to tx BA session timeout clients that set a timeout in their AddBA response to our request, even if our request is without a timeout. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Link: https://lore.kernel.org/r/7c3f72eac1c34921cd84a462e60d71e125862152.1676616450.git.ryder.lee@mediatek.com [slightly clarify commit message, add note about RCU] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: mac80211: add support for driver adding radiotap TLVsMordechay Goodstein
The new TLV format enables adding TLVs after the fixed fields in radiotap, as part of the radiotap header. Support this and move vendor data to the TLV format, allowing a reuse of the RX_FLAG_RADIOTAP_VENDOR_DATA as the new RX_FLAG_RADIOTAP_TLV_AT_END flag. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.b18fd5da8477.I576400ec40a7b35ef97a3b09a99b3a49e9174786@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07netfilter: conntrack: adopt safer max chain lengthEric Dumazet
Customers using GKE 1.25 and 1.26 are facing conntrack issues root caused to commit c9c3b6811f74 ("netfilter: conntrack: make max chain length random"). Even if we assume Uniform Hashing, a bucket often reachs 8 chained items while the load factor of the hash table is smaller than 0.5 With a limit of 16, we reach load factors of 3. With a limit of 32, we reach load factors of 11. With a limit of 40, we reach load factors of 15. With a limit of 50, we reach load factors of 24. This patch changes MIN_CHAINLEN to 50, to minimize risks. Ideally, we could in the future add a cushion based on expected load factor (2 * nf_conntrack_max / nf_conntrack_buckets), because some setups might expect unusual values. Fixes: c9c3b6811f74 ("netfilter: conntrack: make max chain length random") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-03-07wifi: radiotap: Add EHT radiotap definitionsMordechay Goodstein
This is based on https://www.radiotap.org/fields/EHT.html and https://www.radiotap.org/fields/U-SIG.html new EHT TLV definition for 11be standard. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.254b19fffe41.I4ce78e2c558da6e5a708a8d68d61b5d7b3eb3746@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: mac80211: fix ieee80211_link_set_associated() typeJohannes Berg
The return type here should be u64 for the flags, even if it doesn't matter right now because it doesn't return any flags that don't fit into u32. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.d67ccae57d60.Ia4768e547ba8b1deb2b84ce3bbfbe216d5bfff6a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: mac80211: simplify reasoning about EHT capa handlingJohannes Berg
Given the code in cfg80211, EHT capa cannot be non-NULL when HE capa is NULL, but it's easier to reason about it if both are checked and the compiler will likely integrate the check with the previous one for HE capa anyway. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.7413d50d23bc.I6fef7484721be9bd5364f64921fc5e9168495f62@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: mac80211: mlme: remove pointless sta checkJohannes Berg
We already exited the function if sta ended up NULL, so just remove the extra check. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.4cbac9cfd03a.I21ec81c96d246afdabc2b0807d3856e6b1182cb7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: mac80211_hwsim: Indicate support for ↵Ilan Peer
NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT mac80211_hwsim always uses the probe request coming from mac80211, which has support for minimal probe request content. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.67d31166ffd1.I908b68c5127525da3388c0d61a3d5d221ba451f6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: mac80211: add netdev per-link debugfs data and driver hookBenjamin Berg
This adds the infrastructure to have netdev specific per-link data both for mac80211 and the driver in debugfs. For the driver, a new callback is added which is only used if MLO is supported. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.fb4c947e4df8.I69b3516ddf4c8a7501b395f652d6063444ecad63@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: mac80211: remove SMPS from AP debugfsBenjamin Berg
The spatial multiplexing power save feature does not apply to AP mode. Remove it from debugfs in this case. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.01b167027dd5.Iee69f2e4df98581f259ef2c76309b940b20174be@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: mac80211: add pointer from bss_conf to vifBenjamin Berg
While often not needed, this considerably simplifies going from a link specific bss_config to the vif. This helps with e.g. creating link specific debugfs entries inside drivers. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.46f701a10ed5.I20390b2a8165ff222d66585915689206ea93222b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: mac80211: warn only once on AP probeJohannes Berg
We should perhaps support this API for MLO, but it's not clear that it makes sense, in any case then we'd have to update it to probe the correct BSS. For now, if it happens, warn only once so that we don't get flooded with messages if the driver misbehaves and calls this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.1c8499b6fbe6.I1a76a2be3b42ff93904870ac069f0319507adc23@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: cfg80211/mac80211: report link ID on control port RXJohannes Berg
For control port RX, report the link ID for MLO. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.fe06dfc3791b.Iddcab94789cafe336417be406072ce8a6312fc2d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: mac80211: add support for set_hw_timestamp commandAvraham Stern
Support the set_hw_timestamp callback for enabling and disabling HW timestamping if the low level driver supports it. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.700ded7badde.Ib2f7c228256ce313a04d3d9f9ecc6c7b9aa602bb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: nl80211: add a command to enable/disable HW timestampingAvraham Stern
Add a command to enable and disable HW timestamping of TM and FTM frames. HW timestamping can be enabled for a specific mac address or for all addresses. The low level driver will indicate how many peers HW timestamping can be enabled concurrently, and this information will be passed to userspace. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.05678d7b1c17.Iccc08869ea8156f1c71a3111a47f86dd56234bd0@changeid [switch to needing netdev UP, minor edits] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: wireless: cleanup unused function parametersMordechay Goodstein
In the past ftype was used for deciding about 6G DUP beacon, but the logic was removed and ftype is not needed anymore. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.98d4761b809b.I255f5ecd77cb24fcf2f1641bb5833ea2d121296e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: wireless: correct primary channel validation on 6 GHzMordechay Goodstein
The check that beacon primary channel is in the range of 80 MHz (abs < 80) is invalid for 320 MHz since duplicate beacon transmit means that the AP transmits it on all the 20 MHz sub-channels: 9.4.2.249 HE Operation element - ... AP transmits Beacon frames in non-HT duplicate PPDU with a TXVECTOR parameter CH_BANDWIDTH value that is up to the BSS bandwidth. So in case of 320 MHz the DUP beacon can be in upper 160 for primary channel in the lower 160 giving possibly an absolute range of over 80 MHz. Also this check is redundant alltogether, if AP has a wrong primary channel in the beacon it's a faulty AP, and we would fail in next steps to connect. While at it, fix the frequency comparison to no longer compare between KHz and MHz, which was introduced by commit 7f599aeccbd2 ("cfg80211: Use the HE operation IE to determine a 6GHz BSS channel"). Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.314faf725255.I5e27251ac558297553b590d3917a7b6d1aae0e74@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: wireless: return primary channel regardless of DUPMordechay Goodstein
Currently in case DUP bit is not set we don't return the primary channel for 6 GHz Band, but the spec says that the DUP bit has no effect on this field: 9.4.2.249 HE Operation element: The Duplicate Beacon subfield is set to 1 if the AP transmits Beacon frames in non-HT duplicate PPDU with a TXVECTOR parameter CH_BANDWIDTH value that is up to the BSS bandwidth and is set to 0 otherwise. So remove the condition for returning primary channel based on DUP. Since the caller code already marks the signal as invalid in case the indicated frequency is not the tuned frequency, there's no need to additionally handle this case here since that's already true for duplicated beacons on the non-primary channel(s). Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.66d7f05f7d11.I5e0add054f72ede95611391b99804c61c40cc959@changeid [clarify commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: mac80211: allow beacon protection HW offloadJohannes Berg
In case of beacon protection, check if the key was offloaded to the hardware and in that case set control.hw_key so that the encryption function will see it and only do the needed steps that aren't done in hardware. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.b2becd9a22fb.I6c0b9c50c6a481128ba912a11cb7afc92c4b6da7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: mac80211: check key taint for beacon protectionJohannes Berg
This will likely never happen, but for completeness check the key taint flag before using a key for beacon protection. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.cf2c3fee6f1f.I2f19b3e04e31c99bed3c9dc71935bf513b2cd177@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: mac80211: clear all bits that relate rtap fields on skbMordechay Goodstein
Since we remove radiotap from skb data, clear all RX_FLAG_X related info that indicate info on the skb data. Also we need to do it only once so remove the clear from cooked_monitor. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.74d3efe19eae.Ie17a35864d2e120f9858516a2e3d3047d83cf805@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: mac80211: adjust scan cancel comment/checkJohannes Berg
Instead of the comment about holding RTNL, which is now wrong, add a proper lockdep assertion for the wiphy mutex. Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.84352e46f342.Id90fef8c581cebe19cb30274340cf43885d55c74@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: nl80211: Update the documentation of NL80211_SCAN_FLAG_COLOCATED_6GHZIlan Peer
Add a detailed description of NL80211_SCAN_FLAG_COLOCATED_6GHZ flag. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.487ab04feb39.I5129fd61841332474693046241586f057b134c3c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07new helper: put_and_unmap_page()Al Viro
kunmap_local() + put_page(), as done by e.g. ext2 directory handling. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-03-06Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2023-03-06 We've added 85 non-merge commits during the last 13 day(s) which contain a total of 131 files changed, 7102 insertions(+), 1792 deletions(-). The main changes are: 1) Add skb and XDP typed dynptrs which allow BPF programs for more ergonomic and less brittle iteration through data and variable-sized accesses, from Joanne Koong. 2) Bigger batch of BPF verifier improvements to prepare for upcoming BPF open-coded iterators allowing for less restrictive looping capabilities, from Andrii Nakryiko. 3) Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF programs to NULL-check before passing such pointers into kfunc, from Alexei Starovoitov. 4) Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in local storage maps, from Kumar Kartikeya Dwivedi. 5) Add BPF verifier support for ST instructions in convert_ctx_access() which will help new -mcpu=v4 clang flag to start emitting them, from Eduard Zingerman. 6) Make uprobe attachment Android APK aware by supporting attachment to functions inside ELF objects contained in APKs via function names, from Daniel Müller. 7) Add a new flag BPF_F_TIMER_ABS flag for bpf_timer_start() helper to start the timer with absolute expiration value instead of relative one, from Tero Kristo. 8) Add a new kfunc bpf_cgroup_from_id() to look up cgroups via id, from Tejun Heo. 9) Extend libbpf to support users manually attaching kprobes/uprobes in the legacy/perf/link mode, from Menglong Dong. 10) Implement workarounds in the mips BPF JIT for DADDI/R4000, from Jiaxun Yang. 11) Enable mixing bpf2bpf and tailcalls for the loongarch BPF JIT, from Hengqi Chen. 12) Extend BPF instruction set doc with describing the encoding of BPF instructions in terms of how bytes are stored under big/little endian, from Jose E. Marchesi. 13) Follow-up to enable kfunc support for riscv BPF JIT, from Pu Lehui. 14) Fix bpf_xdp_query() backwards compatibility on old kernels, from Yonghong Song. 15) Fix BPF selftest cross compilation with CLANG_CROSS_FLAGS, from Florent Revest. 16) Improve bpf_cpumask_ma to only allocate one bpf_mem_cache, from Hou Tao. 17) Fix BPF verifier's check_subprogs to not unnecessarily mark a subprogram with has_tail_call, from Ilya Leoshkevich. 18) Fix arm syscall regs spec in libbpf's bpf_tracing.h, from Puranjay Mohan. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits) selftests/bpf: Add test for legacy/perf kprobe/uprobe attach mode selftests/bpf: Split test_attach_probe into multi subtests libbpf: Add support to set kprobe/uprobe attach mode tools/resolve_btfids: Add /libsubcmd to .gitignore bpf: add support for fixed-size memory pointer returns for kfuncs bpf: generalize dynptr_get_spi to be usable for iters bpf: mark PTR_TO_MEM as non-null register type bpf: move kfunc_call_arg_meta higher in the file bpf: ensure that r0 is marked scratched after any function call bpf: fix visit_insn()'s detection of BPF_FUNC_timer_set_callback helper bpf: clean up visit_insn()'s instruction processing selftests/bpf: adjust log_fixup's buffer size for proper truncation bpf: honor env->test_state_freq flag in is_state_visited() selftests/bpf: enhance align selftest's expected log matching bpf: improve regsafe() checks for PTR_TO_{MEM,BUF,TP_BUFFER} bpf: improve stack slot state printing selftests/bpf: Disassembler tests for verifier.c:convert_ctx_access() selftests/bpf: test if pointer type is tracked for BPF_ST_MEM bpf: allow ctx writes using BPF_ST_MEM instruction bpf: Use separate RCU callbacks for freeing selem ... ==================== Link: https://lore.kernel.org/r/20230307004346.27578-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-06Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2023-03-06 We've added 8 non-merge commits during the last 7 day(s) which contain a total of 9 files changed, 64 insertions(+), 18 deletions(-). The main changes are: 1) Fix BTF resolver for DATASEC sections when a VAR points at a modifier, that is, keep resolving such instances instead of bailing out, from Lorenz Bauer. 2) Fix BPF test framework with regards to xdp_frame info misplacement in the "live packet" code, from Alexander Lobakin. 3) Fix an infinite loop in BPF sockmap code for TCP/UDP/AF_UNIX, from Liu Jian. 4) Fix a build error for riscv BPF JIT under PERF_EVENTS=n, from Randy Dunlap. 5) Several BPF doc fixes with either broken links or external instead of internal doc links, from Bagas Sanjaya. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: check that modifier resolves after pointer btf: fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES bpf, doc: Link to submitting-patches.rst for general patch submission info bpf, doc: Do not link to docs.kernel.org for kselftest link bpf, sockmap: Fix an infinite loop error when len is 0 in tcp_bpf_recvmsg_parser() riscv, bpf: Fix patch_text implicit declaration bpf, docs: Fix link to BTF doc ==================== Link: https://lore.kernel.org/r/20230306215944.11981-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-06alpha: fix lazy-FPU mis(merged/applied/whatnot)Al Viro
Looks like a braino that used to be fixed in e.g. #next.alpha had gotten into alpha.git cherry-picked version of that patch. Sure, alpha has no preempt, but preempt_enable() in place of preempt_disable() is actively confusing the readers... Other than that, the cherry-picked variant matches what I have. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-03-06selftests: amd-pstate: fix TEST_FILESGuillaume Tucker
Bring back the Python scripts that were initially added with TEST_GEN_FILES but now with TEST_FILES to avoid having them deleted when doing a clean. Also fix the way the architecture is being determined as they should also be installed when ARCH=x86_64 is provided explicitly. Then also append extra files to TEST_FILES and TEST_PROGS with += so they don't get discarded. Fixes: ba2d788aa873 ("selftests: amd-pstate: Trigger tbench benchmark and test cpus") Fixes: a49fb7218ed8 ("selftests: amd-pstate: Don't delete source files via Makefile") Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-03-06RISC-V: Stop emitting attributesPalmer Dabbelt
The RISC-V ELF attributes don't contain any useful information. New toolchains ignore them, but they frequently trip up various older/mixed toolchains. So just turn them off. Tested-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230223224605.6995-1-palmer@rivosinc.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-06zstd: Fix definition of assert()Jonathan Neuschäfer
assert(x) should emit a warning if x is false. WARN_ON(x) emits a warning if x is true. Thus, assert(x) should be defined as WARN_ON(!x) rather than WARN_ON(x). Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Nick Terrell <terrelln@fb.com>
2023-03-06lib: zstd: Backport fix for in-place decompressionNick Terrell
Backport the relevant part of upstream commit 5b266196 [0]. This fixes in-place decompression for x86-64 kernel decompression. It uses a bound of 131072 + (uncompressed_size >> 8), which can be violated after upstream commit 6a7ede3d [1], as zstd can use part of the output buffer as temporary storage, and without this patch needs a bound of ~262144. The fix is for zstd to detect that the input and output buffers overlap, so that zstd knows it can't use the overlapping portion of the output buffer as tempoary storage. If the margin is not large enough, this will ensure that zstd will fail the decompression, rather than overwriting part of the input data, and causing corruption. This fix has been landed upstream and is in release v1.5.4. That commit also adds unit and fuzz tests to verify that the margin we use is respected, and correct. That means that the fix is well tested upstream. I have not been able to reproduce the potential bug in x86-64 kernel decompression locally, nor have I recieved reports of failures to decompress the kernel. It is possible that compression saves enough space to make it very hard for the issue to appear. I've boot tested the zstd compressed kernel on x86-64 and i386 with this patch, which uses in-place decompression, and sanity tested zstd compression in btrfs / squashfs to make sure that we don't see any issues, but other uses of zstd shouldn't be affected, because they don't use in-place decompression. Thanks to Vasily Gorbik <gor@linux.ibm.com> for debugging a related issue on s390, which was triggered by the same commit, but was a bug in how __decompress() was called [2]. And to Sasha Levin <sashal@kernel.org> for the CC alerting me of the issue. [0] https://github.com/facebook/zstd/commit/5b266196a41e6a15e21bd4f0eeab43b938db1d90 [1] https://github.com/facebook/zstd/commit/6a7ede3dfccbf3e0a5928b4224a039c260dcff72 [2] https://lore.kernel.org/r/patch-1.thread-41c676.git-41c676c2d153.your-ad-here.call-01675030179-ext-9637@work.hours CC: Vasily Gorbik <gor@linux.ibm.com> CC: Heiko Carstens <hca@linux.ibm.com> CC: Sasha Levin <sashal@kernel.org> CC: Yann Collet <cyan@fb.com> Signed-off-by: Nick Terrell <terrelln@fb.com>
2023-03-06lib: zstd: Fix -Wstringop-overflow warningKees Cook
Fix the following -Wstringop-overflow warning when building with GCC 11+: lib/zstd/decompress/huf_decompress.c: In function ‘HUF_readDTableX2_wksp’: lib/zstd/decompress/huf_decompress.c:700:5: warning: ‘HUF_fillDTableX2.constprop’ accessing 624 bytes in a region of size 52 [-Wstringop-overflow=] 700 | HUF_fillDTableX2(dt, maxTableLog, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 701 | wksp->sortedSymbol, sizeOfSort, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 702 | wksp->rankStart0, wksp->rankVal, maxW, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 703 | tableLog+1, | ~~~~~~~~~~~ 704 | wksp->calleeWksp, sizeof(wksp->calleeWksp) / sizeof(U32)); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ lib/zstd/decompress/huf_decompress.c:700:5: note: referencing argument 6 of type ‘U32 (*)[13]’ {aka ‘unsigned int (*)[13]’} lib/zstd/decompress/huf_decompress.c:571:13: note: in a call to function ‘HUF_fillDTableX2.constprop’ 571 | static void HUF_fillDTableX2(HUF_DEltX2* DTable, const U32 targetLog, | ^~~~~~~~~~~~~~~~ by using pointer notation instead of array notation. This is one of the last remaining warnings to be fixed before globally enabling -Wstringop-overflow. Co-developed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Cc: Nick Terrell <terrelln@fb.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Nick Terrell <terrelln@fb.com>
2023-03-06scsi: sd: Fix wrong zone_write_granularity value during revalidateShin'ichiro Kawasaki
When the sd driver revalidates host-managed SMR disks, it calls disk_set_zoned() which changes the zone_write_granularity attribute value to the logical block size regardless of the device type. After that, the sd driver overwrites the value in sd_zbc_read_zone() with the physical block size, since ZBC/ZAC requires this for host-managed disks. Between the calls to disk_set_zoned() and sd_zbc_read_zone(), there exists a window where the attribute shows the logical block size as the zone_write_granularity value, which is wrong for host-managed disks. The duration of the window is from 20ms to 200ms, depending on report zone command execution time. To avoid the wrong zone_write_granularity value between disk_set_zoned() and sd_zbc_read_zone(), modify the value not in sd_zbc_read_zone() but just after disk_set_zoned() call. Fixes: a805a4fa4fa3 ("block: introduce zone_write_granularity limit") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://lore.kernel.org/r/20230306063024.3376959-1-shinichiro.kawasaki@wdc.com Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06scsi: storvsc: Handle BlockSize change in Hyper-V VHD/VHDX fileMichael Kelley
Hyper-V uses a VHD or VHDX file on the host as the underlying storage for a virtual disk. The VHD/VHDX file format is a sparse format where real disk space on the host is assigned in chunks that the VHD/VHDX file format calls the BlockSize. This BlockSize is not to be confused with the 512-byte (or 4096-byte) sector size of the underlying storage device. The default block size for a new VHD/VHDX file is 32 Mbytes. When a guest VM touches any disk space within a 32 Mbyte chunk of the VHD/VHDX file, Hyper-V allocates 32 Mbytes of real disk space for that section of the VHD/VHDX. Similarly, if a discard operation is done that covers an entire 32 Mbyte chunk, Hyper-V will free the real disk space for that portion of the VHD/VHDX. This BlockSize is surfaced in Linux as the "discard_granularity" in /sys/block/sd<x>/queue, which makes sense. Hyper-V also has differencing disks that can overlay a VHD/VHDX file to capture changes to the VHD/VHDX while preserving the original VHD/VHDX. One example of this differencing functionality is for VM snapshots. When a snapshot is created, a differencing disk is created. If the snapshot is rolled back, Hyper-V can just delete the differencing disk, and the VM will see the original disk contents at the time the snapshot was taken. Differencing disks are used in other scenarios as well. The BlockSize for a differencing disk defaults to 2 Mbytes, not 32 Mbytes. The smaller default is used because changes to differencing disks are typically scattered all over, and Hyper-V doesn't want to allocate 32 Mbytes of real disk space for a stray write here or there. The smaller BlockSize provides more efficient use of real disk space. When a differencing disk is added to a VHD/VHDX, Hyper-V reports UNIT_ATTENTION with a sense code indicating "Operating parameters have changed", because the value of discard_granularity should be changed to 2 Mbytes. When the differencing disk is removed, discard_granularity should be changed back to 32 Mbytes. However, current code simply reports a message from scsi_report_sense() and the value of /sys/block/sd<x>/queue/discard_granularity is not updated. The message isn't very actionable by a sysadmin. Fix this by having the storvsc driver check for the sense code indicating that the underly VHD/VHDX block size has changed, and do a rescan of the device to pick up the new discard_granularity. With this change the entire transition to/from differencing disks is handled automatically and transparently, with no confusing messages being output. Link: https://lore.kernel.org/r/1677516514-86060-1-git-send-email-mikelley@microsoft.com Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06scsi: megaraid_sas: Driver version update to 07.725.01.00-rc1Chandrakanth Patil
Update driver version. Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Link: https://lore.kernel.org/r/20230302105342.34933-4-chandrakanth.patil@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06scsi: megaraid_sas: Add crash dump mode capability bit in MFI capabilitiesChandrakanth Patil
In kdump kernel mode, the driver works in reduced functionality mode with some features disabled such as reduced MSI-X count and RDPQ disabled, etc. However, the firmware is not aware of this mode in some cases, which results in undefined behavior. To address this, the driver informs the firmware about the kdump mode through MPI capabilities bit during driver initialization. This allows firmware to adjust its behavior accordingly. Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Link: https://lore.kernel.org/r/20230302105342.34933-3-chandrakanth.patil@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06scsi: megaraid_sas: Update max supported LD IDs to 240Chandrakanth Patil
The firmware only supports Logical Disk IDs up to 240 and LD ID 255 (0xFF) is reserved for deleted LDs. However, in some cases, firmware was assigning LD ID 254 (0xFE) to deleted LDs and this was causing the driver to mark the wrong disk as deleted. This in turn caused the wrong disk device to be taken offline by the SCSI midlayer. To address this issue, limit the LD ID range from 255 to 240. This ensures the deleted LD ID is properly identified and removed by the driver without accidently deleting any valid LDs. Fixes: ae6874ba4b43 ("scsi: megaraid_sas: Early detection of VD deletion through RaidMap update") Reported-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Link: https://lore.kernel.org/r/20230302105342.34933-2-chandrakanth.patil@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06scsi: mpi3mr: Bad drive in topology results kernel crashRanjan Kumar
When the SAS Transport Layer support is enabled and a device exposed to the OS by the driver fails INQUIRY commands, the driver frees up the memory allocated for an internal HBA port data structure. However, in some places, the reference to the freed memory is not cleared. When the firmware sends the Device Info change event for the same device again, the freed memory is accessed and that leads to memory corruption and OS crash. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Link: https://lore.kernel.org/r/20230228140835.4075-7-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06scsi: mpi3mr: NVMe command size greater than 8K failsRanjan Kumar
A wrong variable is checked while populating PRP entries in the PRP page and this results in failure. No PRP entries in the PRP page were successfully created and any NVMe Encapsulated commands with PRP of size greater than 8K failed. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Link: https://lore.kernel.org/r/20230228140835.4075-6-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06scsi: mpi3mr: Return proper values for failures in firmware init pathRanjan Kumar
Return proper non-zero return values for all the cases when the controller initialization and re-initialization fails. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Link: https://lore.kernel.org/r/20230228140835.4075-5-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06scsi: mpi3mr: Wait for diagnostic save during controller initRanjan Kumar
If a controller reset operation is triggered to recover the controller from a fault state, then wait for the snapdump to be saved in the firmware region before proceeding to reset the controller. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Link: https://lore.kernel.org/r/20230228140835.4075-4-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06scsi: mpi3mr: Driver unload crashes host when enhanced logging is enabledRanjan Kumar
Prevent driver from trying to dereference a NULL pointer in a debug print while removing a device during driver unload. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Link: https://lore.kernel.org/r/20230228140835.4075-3-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06scsi: mpi3mr: ioctl timeout when disabling/enabling interruptRanjan Kumar
As part of Task Management handling, the driver will disable and enable the MSIx index zero which belongs to the Admin reply queue. During this transition the driver loses some interrupts and this leads to Admin request and ioctl timeouts. After enabling the interrupts, poll the Admin reply queue to avoid timeouts. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Link: https://lore.kernel.org/r/20230228140835.4075-2-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-14 15:25:53 +0000