Age | Commit message (Collapse) | Author |
|
Remove the padapter parameter from the SwLedOff function. padapter can
be derived from the pLed parameter.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221015151115.232095-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the padapter parameter from the SwLedOn function. padapter can be
derived from the pLed parameter.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221015151115.232095-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update bLedOn only if we could update the REG_LEDCFG2 register.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221015151115.232095-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Check the status returned by rtw_write8. Update bLedOn only if we could
update the REG_LEDCFG2 register.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221015151115.232095-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Using an InterTech DMG-02 dongle, the led remains on when the system goes
into standby mode. After wakeup, it's no longer possible to control the
led.
It turned out that the register settings to enable or disable the led were
not correct. They worked for some dongles like the Edimax V2 but not for
others like the InterTech DMG-02.
This patch fixes the register settings. Bit 3 in the led_cfg2 register
controls the led status, bit 5 must always be set to be able to control
the led, bit 6 has no influence on the led. Setting the mac_pinmux_cfg
register is not necessary.
These settings were tested with Edimax V2 and InterTech DMG-02.
Cc: stable@vger.kernel.org
Fixes: 8cd574e6af54 ("staging: r8188eu: introduce new hal dir for RTL8188eu driver")
Suggested-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Michael Straube <straube.linux@gmail.com> # InterTech DMG-02,
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221015151115.232095-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes the following check generated by checkpatch.pl
./drivers/staging/rtl8192e/rtl819x_BAProc.c:65: CHECK: Please
use a blank line after function/struct/union/enum declarations
Signed-off-by: Anjandev Momi <anjan@momi.ca>
Link: https://lore.kernel.org/r/20221014081839.23902-5-anjan@momi.ca
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes the following checks generated by checkpatch.pl:
./drivers/staging/rtl8192e/rtl819x_BAProc.c:261: CHECK:
Alignment should match open parenthesis
./drivers/staging/rtl8192e/rtl819x_BAProc.c:284: CHECK:
Alignment should match open parenthesis
./drivers/staging/rtl8192e/rtl819x_BAProc.c:421: CHECK:
Alignment should match open parenthesis
./drivers/staging/rtl8192e/rtl819x_BAProc.c:441: CHECK:
Alignment should match open parenthesis
Signed-off-by: Anjandev Momi <anjan@momi.ca>
Link: https://lore.kernel.org/r/20221014081839.23902-4-anjan@momi.ca
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes the following checks generated by checkpatch.pl:
./drivers/staging/rtl8192e/rtl819x_BAProc.c:164: CHECK: Please
don't use multiple blank lines
./drivers/staging/rtl8192e/rtl819x_BAProc.c:383: CHECK: Please
don't use multiple blank lines
Signed-off-by: Anjandev Momi <anjan@momi.ca>
Link: https://lore.kernel.org/r/20221014081839.23902-3-anjan@momi.ca
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes the following CHECK generated by checkpatch.pl:
./drivers/staging/rtl8192e/rtl819x_BAProc.c:116: CHECK: Unnecessary
parentheses around pBA->ba_start_seq_ctrl
./drivers/staging/rtl8192e/rtl819x_BAProc.c:261: CHECK: Unnecessary
parentheses around '&pTS'
./drivers/staging/rtl8192e/rtl819x_BAProc.c:346: CHECK: Unnecessary
parentheses around '&pTS'
Signed-off-by: Anjandev Momi <anjan@momi.ca>
Link: https://lore.kernel.org/r/20221014081839.23902-2-anjan@momi.ca
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ignore_received_deauth is in fact a boolean variable. Change its type
to bool and use true, false for its values.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20221015152440.232281-10-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Summarize the two statements to check if either WIFI_FW_AUTH_STATE or
WIFI_FW_ASSOC_STATE is set.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20221015152440.232281-9-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the return statement at the end of the if branch. We can continue
to the final return after the if-else.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20221015152440.232281-8-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If we receive a deauth message from an unknown station, we can drop this
message and exit immediately. Reorder the code to make this clearer, don't
wrap everything in an if statement.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20221015152440.232281-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For management frames, Addr3 is the BSSID. Read it from the mgmt
structure instead of calling GetAddr3Ptr.
The pframe variable is now unused and can be removed.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20221015152440.232281-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For management frames, Addr2 is the Source Address (SA).
Use sa from the mgmt structure and remove the GetAddr2Ptr call.
GetAddr2Ptr is a driver-specific function that we should eventually
remove.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20221015152440.232281-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
bBusyTraffic is set only if we're not in WIFI_AP_STATE, i.e. in the else
branch. If we were not in WIFI_AP_STATE, we'd go into the if branch and
return _SUCCESS before making it to the bBusyTraffic assignment.
Move the assignment into the else branch to make this clearer.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20221015152440.232281-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Read the deauth reson code from the newly added mgmt structure instead of
calculating the offset ourselves.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20221015152440.232281-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Define a struct ieee80211_mgmt for the message that we process in
OnDeAuth. Use this struct to read the bssid.
This patch removes one GetAddr3Ptr call, getting us a tiny step closer to
removing GetAddr3Ptr.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20221015152440.232281-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixed a coding style issue affecting a conditional if statement.
Signed-off-by: Rigel Di Scala <zedr@zedr.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20221012211612.75871-1-zedr@zedr.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This commit cleans up checkpatch warning as follows:
braces {} are not necessary for single statement blocks
Signed-off-by: Rui Li <me@lirui.org>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/166558541522.9.15423282339326993462.68459319@lirui.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable Op to op, Length to length and Value to value to avoid
CamelCase which is not accepted by checkpatch.
Signed-off-by: Dragan Cvetic <dragan.m.cvetic@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20221010190457.13199-4-dragan.m.cvetic@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable CurSTAConnectState to cur_sta_connect_state,
PreSTAConnectState to pre_sta_connect_state to avoid CamelCase
which is not accepted by checkpatch.
Signed-off-by: Dragan Cvetic <dragan.m.cvetic@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20221010190457.13199-2-dragan.m.cvetic@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove braces around single line statement, to resolve checkpatch.pl
warnings "braces {} are not necessary for single statement blocks"
Signed-off-by: Dragan Cvetic <dragan.m.cvetic@gmail.com>
Link: https://lore.kernel.org/r/20221010190252.12402-1-dragan.m.cvetic@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a spelling mistake in a Kconfig description. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221007202941.2756304-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove extra parenthesis in conditional statement in rtw_ioctl_set.
Issue found by checkpatch.
Signed-off-by: Emily Peri <eperi1024@gmail.com>
Link: https://lore.kernel.org/r/a08a440eabddd8e78d045ca9898a415d81f6f6d7.1666230736.git.eperi1024@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Align '*' on each line of block comment in rtw_ioctl_set.
Issue found by checkpatch.
Signed-off-by: Emily Peri <eperi1024@gmail.com>
Link: https://lore.kernel.org/r/3d9738edd0992b72bf8fc8a05706a490772b5317.1666230736.git.eperi1024@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
checkpatch found extra tabs in two conditional statements in
rtw_ieee80211.c. Should be one tab instead of two.
Signed-off-by: Emily Peri <eperi1024@gmail.com>
Link: https://lore.kernel.org/r/Y1BQfiwOXzAZpCCa@marshmallow
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The variable efuseValue is being initialized with a value that is never
read. The variable is being re-assigned later on. The initialization is
redundant and can be removed.
Cleans up warning:
drivers/staging/rtl8723bs/core/rtw_efuse.c:285:6: warning: variable
'efuseValue' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221004153539.150867-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a spellig mistake, correct it and fix capital letter on the
proper noun. Also fix the grammar.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221004150944.148157-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function rtw_free_drv_sw() always returns _SUCCESS. None of its
callers use the return value. Convert the return type of that function
from u8 to void. This is part of getting rid of _FAIL / _SUCCESS.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221002143544.7974-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function rtw_reset_drv_sw() always returns _SUCCESS. None of its
callers use the return value. Convert the return type of that function
from u8 to void. This is part of getting rid of _FAIL / _SUCCESS.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221002143544.7974-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the function _rtw_init_sta_priv() to common kernel error logic.
Return 0 on success and negative value on failure. This is part of
getting rid of returning _SUCCESS and _FAIL which uses inverted error
logic and is used all over the driver.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221002074827.8566-6-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the function rtw_init_mlme_priv() to common kernel error logic.
Return 0 on success and negative value on failure. This is part of
getting rid of returning _SUCCESS and _FAIL which uses inverted error
logic and is used all over the driver.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221002074827.8566-5-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the function rtw_init_cmd_priv() to common kernel error logic.
Return 0 on success and negative value on failure. This is part of
getting rid of returning _SUCCESS and _FAIL which uses inverted error
logic and is used all over the driver.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221002074827.8566-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the function rtw_init_evt_priv() to common kernel error logic.
Return 0 on success and negative value on failure. This is part of
getting rid of returning _SUCCESS and _FAIL which uses inverted error
logic and is used all over the driver.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221002074827.8566-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The macros SET_TX_DESC_ANTSEL_{A,B,C}_88E are used in odm_RTL8188E.c.
Move them from odm_types.h to odm_RTL8188E.h.
ODM_CE is used in places where also ODM_ITRF_USB is used in the code.
Move the ODM_CE define to the header that defines ODM_ITRF_USB. While
at it remove an extra space between '#' and 'define ODM_ITRF_USB'.
The haeder odm_types.h is now empty and we can remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221002074827.8566-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
bDriverIsGoingToUnload is never evaluated. Remove resulting dead code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/48a84cbe359f159cc9c296b261256a405ee3884e.1664616227.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ScanDelay is never evaluated. Remove resulting dead code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/13d0b993d077490c65768f2b11a631a447f8e86f.1664616227.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
bForcedSilentReset is never evaluated. Remove resulting dead code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/10504e628eae110d73cd43050e7cc5801ce7f17b.1664616227.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
bDisableNormalResetCheck is just once initialized with false. All
evaluations will result in !false. Remove resulting dead code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/026313f17cf708bf8fa0661f83b2c2b515e55b12.1664616227.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
RegRfOff is just once initialized with false and then set to false again.
All evaluations will result in false. Remove resulting dead code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/fa306d364b43fee7b81f5289309e93bb6fccdba5.1664616227.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
isRFOff is just once initialized and changed but never evaluated. Remove
resulting dead code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/53242638126775f6698fdcfc49ac552a4e08578b.1664616227.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
bInPowerSaveMode is just once initialized and changed but never evaluated.
Remove resulting dead code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/be3ebecd88b85ba1d87b9b3fbe02f2e78e6a669e.1664616227.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
bIPSModeBackup is just once initialized and never used. Remove resulting
dead code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/657035f84d266fd5c6f96e9b530a96c2ab4ff900.1664616227.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
bInactivePs is just once initialized and never changed. The evaluation
will always have the same result. Remove resulting dead code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/9f46eebf8220a06a1889eaf2d6bac74dd08cfd1f.1664616227.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
bFwCtrlLPS is just once initialized and never changed. The evaluation will
always have the same result. Remove resulting dead code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/d5b5cfd26648180d082f38085a807c932e87703c.1664616227.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the bLedLinkBlinkInProgress component from struct led_priv. Its
only use is to block requests for "link blinking" when this blinking
pattern is already active.
The "link blinking" pattern is a continuous blinking pattern (as opposed
to other patterns where we blink N times), it's no problem to restart this
pattern when it's already running.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221001170618.444444-1-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Improve code readability by merging unnecessary split lines that are
well within the code-style guidelines post merge.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Acked-by: Julia Lawall <julia.lawall@inria.fr>
Link: https://lore.kernel.org/r/Y0z2/qFe3kW96MTs@debian-BULLSEYE-live-builder-AMD64
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix checkpatch warning by splitting up a long line of code, improving
code readability
Signed-off-by: Tanjuate Brunostar <tanjubrunostar0@gmail.com>
Acked-by: Julia Lawall <julia.lawall@inria.fr>
Link: https://lore.kernel.org/r/Y06Vsr7JVvpPem5T@elroy-temp-vm.gaiao0uenmiufjlowqgp5yxwdh.gvxx.internal.cloudapp.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|