summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-04-11Merge tag 'ktest-v4.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest Pull ktest updates from Steven Rostedt: "These commits have either been sitting in my INBOX or have been in my local tree for some time. I need to push them upstream: - Separate out config-bisect.pl from ktest.pl. This allows users to do config bisects without full ktest setup. - Email on status change. Allow the user to be emailed on test start, finish, failure, etc. - Other small fixes and enhancements" * tag 'ktest-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: (24 commits) ktest: Take submenu into account for grub2 menus ktest.pl: Add MAIL_COMMAND option to define how to send email ktest.pl: Use run_command to execute sending mail ktest.pl: Allow dodie be recursive ktest.pl: Kill test if mailer is not supported ktest.pl: Add MAIL_PATH option to define where to find the mailer ktest.pl: No need to print no mailer is specified when mailto is not Ktest: add email options to sample.config Ktest: Use dodie for critical falures Ktest: Add SigInt handling Ktest: Add email support ktest.pl: Detect if a config-bisect was interrupted ktest.pl: Make finding config-bisect.pl dynamic ktest.pl: Have ktest.pl pass -r to config-bisect.pl to reset bisect ktest.pl: Use diffconfig if available for failed config bisects ktest.pl: Allow for the config-bisect.pl output to display to console ktest: Use config-bisect.pl in ktest.pl ktest: Add standalone config-bisect.pl program ktest: Set do_not_reboot=y for CONFIG_BISECT_TYPE=build ktest: Set buildonly=1 for CONFIG_BISECT_TYPE=build ...
2018-04-11Merge tag 'tags/upstream-4.17-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull UBI and UBIFS updates from Richard Weinberger: "Minor bug fixes and improvements" * tag 'tags/upstream-4.17-rc1' of git://git.infradead.org/linux-ubifs: ubi: Reject MLC NAND ubifs: Remove useless parameter of lpt_heap_replace ubifs: Constify struct ubifs_lprops in scan_for_leb_for_idx ubifs: remove unnecessary assignment ubi: Fix error for write access ubi: fastmap: Don't flush fastmap work on detach ubifs: Check ubifs_wbuf_sync() return code
2018-04-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds
Pull UML updates from Richard Weinberger: - a new and faster epoll based IRQ controller and NIC driver - misc fixes and janitorial updates * git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: Fix vector raw inintialization logic Migrate vector timers to new timer API um: Compile with modern headers um: vector: Fix an error handling path in 'vector_parse()' um: vector: Fix a memory allocation check um: vector: fix missing unlock on error in vector_net_open() um: Add missing EXPORT for free_irq_by_fd() High Performance UML Vector Network Driver Epoll based IRQ controller um: Use POSIX ucontext_t instead of struct ucontext um: time: Use timespec64 for persistent clock um: Restore symbol versions for __memcpy and memcpy
2018-04-11Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "Here is a very small set of fixes for inclusion in linux-4.17-rc1: Two changes for the maintainer file, and one more fix for the newly added npcm platform, to enable the level 2 cache controller" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: Update ASPEED entry with details MAINTAINERS: Migrate oxnas list to groups.io arm: npcm: enable L2 cache in NPCM7xx architecture
2018-04-11Merge tag 'nios2-v4.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2 Pull nios2 update from Ley Foon Tan: "Use read_persistent_clock64() instead of read_persistent_clock()" * tag 'nios2-v4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: Use read_persistent_clock64() instead of read_persistent_clock()
2018-04-11drm/i915: Split out functions for different kinds of workaroundsOscar Mateo
There are different kind of workarounds (those that modify registers that live in the context image, those that modify global registers, those that whitelist registers, etc...) and they have different requirements in terms of where they are applied and how. Also, by splitting them apart, it should be easier to decide where a new workaround should go. v2: - Add multiple MISSING_CASE - Rebased v3: - Rename mmio_workarounds to gt_workarounds (Chris, Mika) - Create empty placeholders for BDW and CHV GT WAs - Rebased v4: Rebased v5: - Rebased - FORCE_TO_NONPRIV register exists since BDW, so make a path for it to achieve universality, even if empty (Chris) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> [ickle: appease checkpatch] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/1523376767-18480-2-git-send-email-oscar.mateo@intel.com
2018-04-11drm/i915: Move a bunch of workaround-related code to its own fileOscar Mateo
This has grown to be a sizable amount of code, so move it to its own file before we try to refactor anything. For the moment, we are leaving behind the WA BB code and the WAs that get applied (incorrectly) in init_clock_gating, but we will deal with it later. v2: Use intel_ prefix for code that deals with the hardware (Chris) v3: Rebased v4: - Rebased - New license header v5: - Rebased - Added some organisational notes to the file (Chris) v6: Include DOC section in the documentation build (Jani) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> [ickle: appease checkpatch, mostly] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/1523376767-18480-1-git-send-email-oscar.mateo@intel.com
2018-04-11CIFS: add ONCE flag for cifs_dbg typeAurelien Aptel
* Since cifs_vfs_error was just using pr_debug_ratelimited like the rest of cifs_dbg, move it there too * Add a ONCE type flag to call the pr_xxx_once() debug function instead of the ratelimited ones. To convert existing printk_once() calls to this we can run: perl -i -pE \ 's/printk_once\s*\(([^" \n]+)(.*)/cifs_dbg(VFS|ONCE,$2/g' \ fs/cifs/*.c Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-04-11cifs: Use ULL suffix for 64-bit constantGeert Uytterhoeven
On 32-bit (e.g. with m68k-linux-gnu-gcc-4.1): fs/cifs/inode.c: In function ‘simple_hashstr’: fs/cifs/inode.c:713: warning: integer constant is too large for ‘long’ type Fixes: 7ea884c77e5c97f1 ("smb3: Fix root directory when server returns inode number of zero") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
2018-04-11SMB3: Log at least once if tree connect fails during reconnectSteve French
Adding an extra debug message to show if a tree connect failure during reconnect (and made it a log once so it doesn't spam the logs). Saw a case recently where tree connect repeatedly returned access denied on reconnect and it wasn't as easy to spot as it should have been. Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
2018-04-11cifs: smb2pdu: Fix potential NULL pointer dereferenceGustavo A. R. Silva
tcon->ses is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Fix this by moving the pointer dereference after tcon->ses has been properly null checked. Addresses-Coverity-ID: 1467426 ("Dereference before null check") Fixes: 93012bf98416 ("cifs: add server->vals->header_preamble_size") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-04-11Merge branch 'l2tp-tunnel-creation-fixes'David S. Miller
Guillaume Nault says: ==================== l2tp: tunnel creation fixes L2TP tunnel creation is racy. We need to make sure that the tunnel returned by l2tp_tunnel_create() isn't going to be freed while the caller is using it. This is done in patch #1, by separating tunnel creation from tunnel registration. With the tunnel registration code in place, we can now check for duplicate tunnels in a race-free way. This is done in patch #2, which incidentally removes the last use of l2tp_tunnel_find(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-11l2tp: fix race in duplicate tunnel detectionGuillaume Nault
We can't use l2tp_tunnel_find() to prevent l2tp_nl_cmd_tunnel_create() from creating a duplicate tunnel. A tunnel can be concurrently registered after l2tp_tunnel_find() returns. Therefore, searching for duplicates must be done at registration time. Finally, remove l2tp_tunnel_find() entirely as it isn't use anywhere anymore. Fixes: 309795f4bec2 ("l2tp: Add netlink control API for L2TP") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-11l2tp: fix races in tunnel creationGuillaume Nault
l2tp_tunnel_create() inserts the new tunnel into the namespace's tunnel list and sets the socket's ->sk_user_data field, before returning it to the caller. Therefore, there are two ways the tunnel can be accessed and freed, before the caller even had the opportunity to take a reference. In practice, syzbot could crash the module by closing the socket right after a new tunnel was returned to pppol2tp_create(). This patch moves tunnel registration out of l2tp_tunnel_create(), so that the caller can safely hold a reference before publishing the tunnel. This second step is done with the new l2tp_tunnel_register() function, which is now responsible for associating the tunnel to its socket and for inserting it into the namespace's list. While moving the code to l2tp_tunnel_register(), a few modifications have been done. First, the socket validation tests are done in a helper function, for clarity. Also, modifying the socket is now done after having inserted the tunnel to the namespace's tunnels list. This will allow insertion to fail, without having to revert theses modifications in the error path (a followup patch will check for duplicate tunnels before insertion). Either the socket is a kernel socket which we control, or it is a user-space socket for which we have a reference on the file descriptor. In any case, the socket isn't going to be closed from under us. Reported-by: syzbot+fbeeb5c3b538e8545644@syzkaller.appspotmail.com Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-11i2c: add param sanity check to i2c_transfer()Ard Biesheuvel
The API docs describe i2c_transfer() as taking a pointer to an array of i2c_msg containing at least 1 entry, but leaves it to the individual drivers to sanity check the msgs and num parameters. Let's do this in core code instead. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [wsa: changed '<= 0' to '< 1'] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-11MAINTAINERS: add maintainer for Renesas I2C related driversWolfram Sang
Intentionally missing i2c-riic here, Chris Brandt will add himself for that one later. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-11MAINTAINERS: remove me as maintainer for I2C host driversWolfram Sang
The number of I2C host controller drivers keeps increasing, and although I had some success acquiring specific driver maintainers, my bandwidth is by far not enough to act as a fallback for the rest of the drivers. To reflect this status-quo in MAINTAINERS, add a separate entry for I2C host drivers, let the I2C list (= community) be the contact point, and mark this section as "Odd fixes". Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-11i2c: i801: Restore configuration at shutdownJean Delvare
On some systems, the BIOS expects certain SMBus register values to match the hardware defaults. Restore these configuration registers at shutdown time to avoid confusing the BIOS. This avoids hard-locking such systems upon reboot. Signed-off-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jason Andryuk <jandryuk@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@vger.kernel.org
2018-04-11i2c: i801: Save register SMBSLVCMD value only onceJean Delvare
Saving the original value of register SMBSLVCMD in i801_enable_host_notify() doesn't work, because this function is called not only at probe time but also at resume time. Do it in i801_probe() instead, so that the saved value is not overwritten at resume time. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: 22e94bd6779e ("i2c: i801: store and restore the SLVCMD register at load and unload") Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Jason Andryuk <jandryuk@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@vger.kernel.org # v4.10+
2018-04-11parisc: Prevent panic at system haltHelge Deller
When issuing a "shutdown -h now", the reboot syscall calls kernel_halt() which shouldn't return, otherwise one gets this panic: reboot: System halted Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000 CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 4.16.0-32bit+ #560 Backtrace: [<1018a694>] show_stack+0x18/0x28 [<106e68a8>] dump_stack+0x80/0x10c [<101a4df8>] panic+0xfc/0x290 [<101a90b8>] do_exit+0x73c/0x914 [<101c7e38>] SyS_reboot+0x190/0x1d4 [<1017e444>] syscall_exit+0x0/0x14 Fix it by letting machine_halt() call machine_power_off() which doesn't return. Signed-off-by: Helge Deller <deller@gmx.de>
2018-04-11tun: send netlink notification when the device is modifiedSabrina Dubroca
I added dumping of link information about tun devices over netlink in commit 1ec010e70593 ("tun: export flags, uid, gid, queue information over netlink"), but didn't add the missing netlink notifications when the device's exported properties change. This patch adds notifications when owner/group or flags are modified, when queues are attached/detached, and when a tun fd is closed. Reported-by: Thomas Haller <thaller@redhat.com> Fixes: 1ec010e70593 ("tun: export flags, uid, gid, queue information over netlink") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-11tun: set the flags before registering the netdeviceSabrina Dubroca
Otherwise, register_netdevice advertises the creation of the device with the default flags, instead of what the user requested. Reported-by: Thomas Haller <thaller@redhat.com> Fixes: 1ec010e70593 ("tun: export flags, uid, gid, queue information over netlink") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-11lan78xx: Don't reset the interface on openPhil Elwell
Commit 92571a1aae40 ("lan78xx: Connect phy early") moves the PHY initialisation into lan78xx_probe, but lan78xx_open subsequently calls lan78xx_reset. As well as forcing a second round of link negotiation, this reset frequently prevents the phy interrupt from being generated (even though the link is up), rendering the interface unusable. Fix this issue by removing the lan78xx_reset call from lan78xx_open. Fixes: 92571a1aae40 ("lan78xx: Connect phy early") Signed-off-by: Phil Elwell <phil@raspberrypi.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-11Merge branch 'bnxt_en-Fixes-for-net'David S. Miller
Michael Chan says: ==================== bnxt_en: Fixes for net. This bug fix series include NULL pointer fixes in ethtool -x code path and in the error clean up path when freeing IRQs, a ring accounting bug that missed rings used by the RDMA driver, and 3 bug fixes related to TC Flower and VF-reps. v2: Fixed commit message of patch 4. Changed the pound sign to $ sign in front of the ip command. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-11bnxt_en: Fix NULL pointer dereference at bnxt_free_irq().Michael Chan
When open fails during ethtool -L ring change, for example, the driver may crash at bnxt_free_irq() because bp->bnapi is NULL. If we fail to allocate all the new rings, bnxt_open_nic() will free all the memory including bp->bnapi. Subsequent call to bnxt_close_nic() will try to dereference bp->bnapi in bnxt_free_irq(). Fix it by checking for !bp->bnapi in bnxt_free_irq(). Fixes: e5811b8c09df ("bnxt_en: Add IRQ remapping logic.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-11bnxt_en: Need to include RDMA rings in bnxt_check_rings().Michael Chan
With recent changes to reserve both L2 and RDMA rings, we need to include the RDMA rings in bnxt_check_rings(). Otherwise we will under-estimate the rings we need during ethtool -L and may lead to failure. Fixes: fbcfc8e46741 ("bnxt_en: Reserve completion rings and MSIX for bnxt_re RDMA driver.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-11bnxt_en: Support max-mtu with VF-repsSriharsha Basavapatna
While a VF is configured with a bigger mtu (> 1500), any packets that are punted to the VF-rep (slow-path) get dropped by OVS kernel-datapath with the following message: "dropped over-mtu packet". Fix this by returning the max-mtu value for a VF-rep derived from its corresponding VF. VF-rep's mtu can be changed using 'ip' command as shown in this example: $ ip link set bnxt0_pf0vf0 mtu 9000 Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-11bnxt_en: Ignore src port field in decap filter nodesSriharsha Basavapatna
The driver currently uses src port field (along with other fields) in the decap tunnel key, while looking up and adding tunnel nodes. This leads to redundant cfa_decap_filter_alloc() requests to the FW and flow-miss in the flow engine. Fix this by ignoring the src port field in decap tunnel nodes. Fixes: f484f6782e01 ("bnxt_en: add hwrm FW cmds for cfa_encap_record and decap_filter") Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-11bnxt_en: do not allow wildcard matches for L2 flowsAndy Gospodarek
Before this patch the following commands would succeed as far as the user was concerned: $ tc qdisc add dev p1p1 ingress $ tc filter add dev p1p1 parent ffff: protocol all \ flower skip_sw action drop $ tc filter add dev p1p1 parent ffff: protocol ipv4 \ flower skip_sw src_mac 00:02:00:00:00:01/44 action drop The current flow offload infrastructure used does not support wildcard matching for ethernet headers, so do not allow the second or third commands to succeed. If a user wants to drop traffic on that interface the protocol and MAC addresses need to be specified explicitly: $ tc qdisc add dev p1p1 ingress $ tc filter add dev p1p1 parent ffff: protocol arp \ flower skip_sw action drop $ tc filter add dev p1p1 parent ffff: protocol ipv4 \ flower skip_sw action drop ... $ tc filter add dev p1p1 parent ffff: protocol ipv4 \ flower skip_sw src_mac 00:02:00:00:00:01 action drop $ tc filter add dev p1p1 parent ffff: protocol ipv4 \ flower skip_sw src_mac 00:02:00:00:00:02 action drop ... There are also checks for VLAN parameters in this patch as other callers may wildcard those parameters even if tc does not. Using different flow infrastructure could allow this to work in the future for L2 flows, but for now it does not. Fixes: 2ae7408fedfe ("bnxt_en: bnxt: add TC flower filter offload support") Signed-off-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-11bnxt_en: Fix ethtool -x crash when device is down.Michael Chan
Fix ethtool .get_rxfh() crash by checking for valid indirection table address before copying the data. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-11drm/amd/display: fix brightness level after resume from suspendRoman Li
Adding missing call to cache current backlight values. Otherwise the brightness resets to default value on resume. Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-11drm/amd/display: HDMI has no sound after Panel power off/onCharlene Liu
Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-11drm/amdgpu: add MP1 and THM hw ip base reg offsetEvan Quan
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-11drm/amdgpu: fix null pointer panic with direct fw loading on gpu resetHuang Rui
When system uses fw direct loading, then psp context structure won't be initiliazed. And it is also unable to execute mode reset. [ 434.601474] amdgpu 0000:0c:00.0: GPU reset begin! [ 434.694326] amdgpu 0000:0c:00.0: GPU reset [ 434.743152] BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 [ 434.838474] IP: psp_gpu_reset+0xc/0x30 [amdgpu] [ 434.893532] PGD 406ed9067 [ 434.893533] P4D 406ed9067 [ 434.926376] PUD 400b46067 [ 434.959217] PMD 0 [ 435.033379] Oops: 0000 [#1] SMP [ 435.072573] Modules linked in: amdgpu(OE) chash(OE) gpu_sched(OE) ttm(OE) drm_kms_helper(OE) drm(OE) fb_sys_fops syscopyarea sysfillrect sysimgblt rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace fscache snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm edac_mce_amd snd_seq_midi snd_seq_midi_event kvm_amd snd_rawmidi kvm irqbypass crct10dif_pclmul crc32_pclmul snd_seq ghash_clmulni_intel snd_seq_device pcbc snd_timer eeepc_wmi aesni_intel snd asus_wmi aes_x86_64 sparse_keymap crypto_simd glue_helper joydev soundcore wmi_bmof cryptd video i2c_piix4 shpchp 8250_dw i2c_designware_platform mac_hid i2c_designware_core sunrpc parport_pc ppdev lp parport autofs4 hid_generic igb usbhid dca ptp mxm_wmi pps_core ahci hid i2c_algo_bit [ 435.931754] libahci wmi Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-11drm/radeon: add PX quirk for Asus K73TKNico Sneck
With this the dGPU turns on correctly. Signed-off-by: Nico Sneck <nicosneck@hotmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-04-11drm/amd/display: dal 3.1.41Yongqiang Sun
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-11drm/amd/display: Fix FBC text console corruptionRoman Li
Signed-off-by: Roman Li <roman.li@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-11drm/amd/display: csc updates require FULL updateAnthony Koo
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-11drm/amd/display: Make DCN stream encoder shareableEric Bernstein
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-11drm/amd/display: Update scaler v_active data if interlacedDmytro Laktyushkin
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-11drm/amd/display: Change disable backlight ramp change threshold from 0 to ↵Yongqiang Sun
maximum value. Instead of user set brightness with range of percentage, HLK test set brightness level with range of normal, this will result in HLK test case set brightness from 0 to 255, DC set brightness with ramp is 0, and disabled ramp change which will fail the HLK test. Fix: In case of unblank stream and turn on edp, change brightness level in stream to 0xFFFFFFFF(actural maximum level is 0xFF), use that value as a flag to recogonize this the case of resume from S3. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-11drm/amd/display: Fill calcs date from stream src/dst if availableJun Lei
We would otherwise fallback to the timing, which would always give us identity. Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-11drm/amd/display: fix link bw calculation for 422 and 420 encodingEric Yang
Link bw required is reduced when we have chroma subsampling. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-11drm/amd/display: remove unused enumJun Lei
Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-11drm/amd/display: Refactor stream encoder for HW reviewEric Bernstein
Move DCN1 implementation of stream encoder to new file (instead of common dce_stream_encoder.c). Cleanup code related to different implementation due to register definition differences. Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-11drm/amd/display: Set all update flags when we have full updateEric Yang
To prevent future optimization related bugs, just set all update flags when we have a full update, since we know we want to reprogram everything in that case. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-11drm/amd/display: add delay between panel pwr off to on.Charlene Liu
As per eDP 1.4 spec, there must be at least 500ms delay between eDP power off and on. This change added time stamp when edp power off, which can be used to calculate duration time when edp power on. If duration less than 500ms, add a wait. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-11drm/amd/display: Implement dm_get_timestampHarry Wentland
We use this to ensure we wait at least 500ms in between eDP disable/enable. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-11drm/amd/display: Add vmax/min_sel prints to dcn10_log_hw_stateAnthony Koo
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-11drm/amd/display: Add Dynamic debug printsBhawanpreet Lakha
Created Macros for DC_LOG_XXX to pr_debug() & DRM_DEBUG_KMS. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-19 02:50:15 +0000