summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-09-27clk: rockchip: switch to using the new cpuclk type for armclkHeiko Stuebner
This adds the necessary soc-specific divider values and switches the armclk to use the newly introduced cpuclk type. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org>
2014-09-27clk: rockchip: add new clock-type for the cpuclkHeiko Stuebner
When changing the armclk on Rockchip SoCs it is supposed to be reparented to an alternate parent before changing the underlying pll and back after the change. Additionally there exist clocks that are very tightly bound to the armclk whose divider values are set according to the armclk rate. Add a special clock-type to handle all that. The rate table and divider values will be supplied from the soc-specific clock controllers. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> On a rk3288-board: Tested-by: Doug Anderson <dianders@chromium.org>
2014-09-27clk: rockchip: make tightly bound armclk child-clocks read-onlyHeiko Stuebner
Rockchip SoCs contain clocks tightly bound to the armclk, where the best rate / divider is supplied by the vendor after careful measuring. Often this ideal rate may be greater than the current rate. Therefore prevent the ccf from trying to set these dividers itself by setting them to read-only. In the case of the rk3066, this also includes the aclk_cpu, which makes it necessary to also split its direct child-clocks (pclk_cpu, hclk_cpu, ...) into individual definitions for rk3066 and rk3188. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org>
2014-09-27clk: rockchip: reparent aclk_cpu_pre to the gpllHeiko Stuebner
aclk_cpu_pre on the rk3188 can either be sourced from the armclk or the gpll. To reduce complexity on apll changes caused by cpufreq, reparent it always to the gpll source. If really necessary it could be reparented back on a per board level using the assigned-clocks mechanism. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-09-27clk: rockchip: fix rk3288 pll status register locationJianqun
In RK3288, APLL lock status bit is in GRF_SOC_STATUS1, but in RK3188, is GRFSOC_STATUS0. Signed-off-by: Jianqun <jay.xu@rock-chips.com> Also name the constant accordingly as GRF_SOC_STATUS1 to prevent confusion. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org>
2014-09-27clk: rockchip: fix rk3066 pll status register locationHeiko Stuebner
The register providing the pll lock status is at a different address on the rk3066. The error became apparent while working on cpufreq support for the rockchip SoCs. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-09-27clk: rockchip: change pll rate without a clk-notifierDoug Anderson
The Rockchip PLL code switches into slow mode (AKA bypass more AKA 24MHz mode) before actually changing the PLL. This keeps anyone from using the PLL while it's changing. However, in all known Rockchip SoCs nobody should ever see the 24MHz when changing the PLL supplying the armclk because we should reparent children to an alternate (faster than 24MHz) PLL. One problem is that the code to switch to an alternate parent was running in PRE_RATE_CHANGE. ...and the code to switch to slow mode was _also_ running in PRE_RATE_CHANGE. That meant there was no real guarantee that we would switch to an alternate parent before switching to 24MHz mode. Let's move the switch to "slow mode" straight into rockchip_rk3066_pll_set_rate(). That means we're guaranteed that the 24MHz is really a last-resort. Note that without this change on real systems we were the code to switch to an alternate parent at 24MHz. In some older versions of that code we'd appy a (temporary) / 5 to the 24MHz causing us to run at 4.8MHz. That wasn't enough to service USB interrupts in some cases and could lead to a system hang. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-09-27Merge branch 'v3.18-next/armclkid' into v3.18-next/cpuclkHeiko Stuebner
2014-09-27clk: rockchip: add binding id for ARMCLKHeiko Stuebner
Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org>
2014-09-27block: Add T10 Protection Information functionsMartin K. Petersen
The T10 Protection Information format is also used by some devices that do not go through the SCSI layer (virtual block devices, NVMe). Relocate the relevant functions to a block layer library that can be used without involving SCSI. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-27block: Don't merge requests if integrity flags differMartin K. Petersen
We'd occasionally merge requests with conflicting integrity flags. Introduce a merge helper which checks that the requests have compatible integrity payloads. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-27block: Integrity checksum flagMartin K. Petersen
Make the choice of checksum a per-I/O property by introducing a flag that can be inspected by the SCSI layer. There are several reasons for this: 1. It allows us to switch choice of checksum without unloading and reloading the HBA driver. 2. During error recovery we need to be able to tell the HBA that checksums read from disk should not be verified and converted to IP checksums. 3. For error injection purposes we need to be able to write a bad guard tag to storage. Since the storage device only supports T10 CRC we need to be able to disable IP checksum conversion on the HBA. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-27block: Relocate bio integrity flagsMartin K. Petersen
Move flags affecting the integrity code out of the bio bi_flags and into the block integrity payload. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-27block: Add a disk flag to block integrity profileMartin K. Petersen
So far we have relied on the app tag size to determine whether a disk has been formatted with T10 protection information or not. However, not all target devices provide application tag storage. Add a flag to the block integrity profile that indicates whether the disk has been formatted with protection information. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Sagi Grimberg <sagig@dev.mellanox.co.il> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-27block: Add prefix to block integrity profile flagsMartin K. Petersen
Add a BLK_ prefix to the integrity profile flags. Also rename the flags to be more consistent with the generate/verify terminology in the rest of the integrity code. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-27block: Clean up the code used to generate and verify integrity metadataMartin K. Petersen
Instead of the "operate" parameter we pass in a seed value and a pointer to a function that can be used to process the integrity metadata. The generation function is changed to have a return value to fit into this scheme. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-27block: Make protection interval calculation genericMartin K. Petersen
Now that the protection interval has been detached from the sector size we need to be able to handle sizes that are different from 4K and 512. Make the interval calculation generic. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-27block: Deprecate the use of the term sector in the context of block integrityMartin K. Petersen
The protection interval is not necessarily tied to the logical block size of a block device. Stop using the terms "sector" and "sectors". Going forward we will use the term "seed" to describe the initial reference tag value for a given I/O. "Interval" will be used to describe the portion of the data buffer that a given piece of protection information is associated with. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-27block: Remove bip_bufMartin K. Petersen
bip_buf is not really needed so we can remove it. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-27block: Remove integrity tagging functionsMartin K. Petersen
None of the filesystems appear interested in using the integrity tagging feature. Potentially because very few storage devices actually permit using the application tag space. Remove the tagging functions. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-27block: Replace bi_integrity with bi_specialMartin K. Petersen
For commands like REQ_COPY we need a way to pass extra information along with each bio. Like integrity metadata this information must be available at the bottom of the stack so bi_private does not suffice. Rename the existing bi_integrity field to bi_special and make it a union so we can have different bio extensions for each class of command. We previously used bi_integrity != NULL as a way to identify whether a bio had integrity metadata or not. Introduce a REQ_INTEGRITY to be the indicator now that bi_special can contain different things. In addition, bio_integrity(bio) will now return a pointer to the integrity payload (when applicable). Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-27block: Get rid of bdev_integrity_enabled()Martin K. Petersen
bdev_integrity_enabled() is only used by bio_integrity_enabled(). Combine these two functions. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-27regmap: fix NULL pointer dereference in _regmap_write/readPankaj Dubey
If LOG_DEVICE is defined and map->dev is NULL it will lead to NULL pointer dereference. This patch fixes this issue by adding check for dev->NULL in all such places in regmap.c Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-09-27ASoC: ssm4567: Add driver for Analog Devices SSM4567 amplifierAnatol Pomozov
Analog Devices SSM4567 is a boost class-D audio amplifier. Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-27ARC: Allow SMP kernel to build/boot on UP-only infrastructureVineet Gupta
In light of recent SNAFU with SMP build, allow simple platform to build as SMP but run UP. * Remove the dependence on simulation SMP extension to enable quick build/test iterations of SMP kernel. * In absence of platform SMP registration, prevent the NULL smp feature name from borkign the system Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2014-09-27Merge tag 'kvm-arm-for-3.18' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-next Changes for KVM for arm/arm64 for 3.18 This includes a bunch of changes: - Support read-only memory slots on arm/arm64 - Various changes to fix Sparse warnings - Correctly detect write vs. read Stage-2 faults - Various VGIC cleanups and fixes - Dynamic VGIC data strcuture sizing - Fix SGI set_clear_pend offset bug - Fix VTTBR_BADDR Mask - Correctly report the FSC on Stage-2 faults Conflicts: virt/kvm/eventfd.c [duplicate, different patch where the kvm-arm version broke x86. The kvm tree instead has the right one]
2014-09-27Merge tag 'perf-core-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: o Restore "--callchain graph" output, broken in recent cset to end up being the same as "fractal" (Namhyung Kim) o Allow profiling when kptr_restrict == 1 for non root users, kernel samples will just remain unresolved (Andi Kleen) o Allow configuring default options for callchains in config file (Namhyung Kim) o Fix line number in the config file error message (Jiri Olsa) o Fix --per-core on multi socket systems (Andi Kleen) Cleanups: o Use ACCESS_ONCE() instead of volatile cast. (Pranith Kumar) o Modify error code for when perf_session__new() fails (Taeung Song) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-27clk: sunxi: Add sun8i MBUS clock supportChen-Yu Tsai
The MBUS clock on sun8i is slightly different from the old mod0 clocks. The divider is 3 bits wider, while also needing a divider table for the higher 4 values, which all set the same divider. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-09-27clk: sunxi: mod0: Introduce MMC proper phase handlingMaxime Ripard
The MMC clock we thought we had until now are actually not one but three different clocks. The main one is unchanged, and will have three outputs: - The clock fed into the MMC - a sample and output clocks, to deal with when should we output/sample data to/from the MMC bus The phase control we had are actually controlling the two latter clocks, but the main MMC one is unchanged. We can adjust the phase with a 3 bits value, from 0 to 7, 0 meaning a 180 phase shift, and the other values being the number of periods from the MMC parent clock to outphase the clock of. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
2014-09-27clk: sunxi: Move mbus to mod0 fileMaxime Ripard
Move the MBUS clock to the module clocks file. It's pretty trivial, but still requires to enable the clocks to make sure it won't get disabled. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
2014-09-27clk: sunxi: Move mod0 clock to a file of its ownMaxime Ripard
Since we know have the ability to declare factors clock outside of clk-sunxi, create a new mod0 driver to deal with the mod0 clocks. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
2014-09-27ARM: sunxi: dt: Switch to the new mbus compatibleMaxime Ripard
Now that we have a compatible of its own for the mbus clock, switch to it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
2014-09-27clk: sunxi: Introduce mbus compatibleMaxime Ripard
Even though the mbus clock is a regular module clock, given its nature, it needs to be enabled all the time. Introduce a new compatible, to differentiate it from the other module clocks. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
2014-09-27clk: sunxi: factors: Invert the probing logicMaxime Ripard
Until now, the factors clock probing was done directly by sunxi_init_clocks, with the factors registration being called directly with the clocks data passed as an argument. This approch has shown its limits when we added more clocks, since we couldn't really split code with such a logic in smaller files, and led to a huge file having all the clocks. Introduce an intermediate probing function, so that factor clocks will be able to directly be called by CLK_OF_DECLARE, which will in turn ease the split into several files. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
2014-09-27clk: Add a function to retrieve phaseMaxime Ripard
The current phase API doesn't look into the actual hardware to get the phase value, but will rather get it from a variable only set by the set_phase function. This will cause issue when the client driver will never call the set_phase function, where we can end up having a reported phase that will not match what the hardware has been programmed to by the bootloader or what phase is programmed out of reset. Add a new get_phase function for the drivers to implement so that we can get this value. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Hans de Goede <hdegoede@redhat.com>
2014-09-27clk: Include of.h in clock-provider.hMaxime Ripard
CLK_OF_DECLARE relies on OF_DECLARE_1 that is defined in of.h. Fixes build errors when one use CLK_OF_DECLARE but doesn't include of.h Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
2014-09-27clk: introduce clk_set_phase function & callbackMike Turquette
A common operation for a clock signal generator is to shift the phase of that signal. This patch introduces a new function to the clk.h API to dynamically adjust the phase of a clock signal. Additionally this patch introduces support for the new function in the common clock framework via the .set_phase call back in struct clk_ops. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Hans de Goede <hdegoede@redhat.com>
2014-09-26fold unlocking the children into dentry_unlock_parents_for_move()Al Viro
... renaming it into dentry_unlock_for_move() and making it more symmetric with dentry_lock_for_move(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-09-26kill __d_materialise_dentry()Al Viro
it folds into __d_move() now Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-09-26__d_materialise_dentry(): flip the order of argumentsAl Viro
... thus making it much closer to (now unreachable, BTW) IS_ROOT(dentry) case in __d_move(). A bit more and it'll fold in. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-09-26sparc64: Fix hibernation code refrence to PAGE_OFFSET.David S. Miller
We changed PAGE_OFFSET to be a variable rather than a constant, but this reference here in the hibernate assembler got missed. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26__d_move(): fold manipulations with ->d_child/->d_subdirsAl Viro
list_del() + list_add() is a slightly pessimised list_move() list_del() + INIT_LIST_HEAD() is a slightly pessimised list_del_init() Interleaving those makes the resulting code even worse. And harder to follow... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-09-26don't open-code d_rehash() in d_materialise_unique()Al Viro
... and get rid of duplicate BUG_ON() there Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-09-26pull rehashing and unlocking the target dentry into __d_materialise_dentry()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-09-26ufs: deal with nfsd/iget racesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-09-26fuse: honour max_read and max_write in direct_io modeMiklos Szeredi
The third argument of fuse_get_user_pages() "nbytesp" refers to the number of bytes a caller asked to pack into fuse request. This value may be lesser than capacity of fuse request or iov_iter. So fuse_get_user_pages() must ensure that *nbytesp won't grow. Now, when helper iov_iter_get_pages() performs all hard work of extracting pages from iov_iter, it can be done by passing properly calculated "maxsize" to the helper. The other caller of iov_iter_get_pages() (dio_refill_pages()) doesn't need this capability, so pass LONG_MAX as the maxsize argument here. Fixes: c9c37e2e6378 ("fuse: switch to iov_iter_get_pages()") Reported-by: Werner Baumann <werner.baumann@onlinehome.de> Tested-by: Maxim Patlasov <mpatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-09-26shmem: fix nlink for rename overwrite directoryMiklos Szeredi
If overwriting an empty directory with rename, then need to drop the extra nlink. Test prog: #include <stdio.h> #include <fcntl.h> #include <err.h> #include <sys/stat.h> int main(void) { const char *test_dir1 = "test-dir1"; const char *test_dir2 = "test-dir2"; int res; int fd; struct stat statbuf; res = mkdir(test_dir1, 0777); if (res == -1) err(1, "mkdir(\"%s\")", test_dir1); res = mkdir(test_dir2, 0777); if (res == -1) err(1, "mkdir(\"%s\")", test_dir2); fd = open(test_dir2, O_RDONLY); if (fd == -1) err(1, "open(\"%s\")", test_dir2); res = rename(test_dir1, test_dir2); if (res == -1) err(1, "rename(\"%s\", \"%s\")", test_dir1, test_dir2); res = fstat(fd, &statbuf); if (res == -1) err(1, "fstat(%i)", fd); if (statbuf.st_nlink != 0) { fprintf(stderr, "nlink is %lu, should be 0\n", statbuf.st_nlink); return 1; } return 0; } Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-09-26Merge tag 'clk-mvebu-3.18' of git://git.infradead.org/linux-mvebu into clk-nextMike Turquette
clock changes for mvebu for v3.18 - correct timer drift caused by SSCG deviation - fix typo in comment
2014-09-26clk: add gpio gated clockJyri Sarha
The added gpio-gate-clock is a basic clock that can be enabled and disabled trough a gpio output. The DT binding document for the clock is also added. For EPROBE_DEFER handling the registering of the clock has to be delayed until of_clk_get() call time. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-09-26Merge tag 'qcom-clocks-for-3.18' of ↵Mike Turquette
git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into clk-next qcom clock changes for 3.18 Some fixes for the IPQ driver and some code consolidation and refactoring.
generated by cgit (git 2.34.1) at 2025-10-01 21:47:25 +0000