summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-07-15mm: thp: move pmd check inside ptl for freeze_page()Naoya Horiguchi
I found a race condition triggering VM_BUG_ON() in freeze_page(), when running a testcase with 3 processes: - process 1: keep writing thp, - process 2: keep clearing soft-dirty bits from virtual address of process 1 - process 3: call migratepages for process 1, The kernel message is like this: kernel BUG at /src/linux-dev/mm/huge_memory.c:3096! invalid opcode: 0000 [#1] SMP Modules linked in: cfg80211 rfkill crc32c_intel ppdev serio_raw pcspkr virtio_balloon virtio_console parport_pc parport pvpanic acpi_cpufreq tpm_tis tpm i2c_piix4 virtio_blk virtio_net ata_generic pata_acpi floppy virtio_pci virtio_ring virtio CPU: 0 PID: 28863 Comm: migratepages Not tainted 4.6.0-v4.6-160602-0827-+ #2 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff880037320000 ti: ffff88007cdd0000 task.ti: ffff88007cdd0000 RIP: 0010:[<ffffffff811f8e06>] [<ffffffff811f8e06>] split_huge_page_to_list+0x496/0x590 RSP: 0018:ffff88007cdd3b70 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff88007c7b88c0 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000700000200 RDI: ffffea0003188000 RBP: ffff88007cdd3bb8 R08: 0000000000000001 R09: 00003ffffffff000 R10: ffff880000000000 R11: ffffc000001fffff R12: ffffea0003188000 R13: ffffea0003188000 R14: 0000000000000000 R15: 0400000000000080 FS: 00007f8ec241d740(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8ec1f3ed20 CR3: 000000003707b000 CR4: 00000000000006f0 Call Trace: ? list_del+0xd/0x30 queue_pages_pte_range+0x4d1/0x590 __walk_page_range+0x204/0x4e0 walk_page_range+0x71/0xf0 queue_pages_range+0x75/0x90 ? queue_pages_hugetlb+0x190/0x190 ? new_node_page+0xc0/0xc0 ? change_prot_numa+0x40/0x40 migrate_to_node+0x71/0xd0 do_migrate_pages+0x1c3/0x210 SyS_migrate_pages+0x261/0x290 entry_SYSCALL_64_fastpath+0x1a/0xa4 Code: e8 b0 87 fb ff 0f 0b 48 c7 c6 30 32 9f 81 e8 a2 87 fb ff 0f 0b 48 c7 c6 b8 46 9f 81 e8 94 87 fb ff 0f 0b 85 c0 0f 84 3e fd ff ff <0f> 0b 85 c0 0f 85 a6 00 00 00 48 8b 75 c0 4c 89 f7 41 be f0 ff RIP split_huge_page_to_list+0x496/0x590 I'm not sure of the full scenario of the reproduction, but my debug showed that split_huge_pmd_address(freeze=true) returned without running main code of pmd splitting because pmd_present(*pmd) in precheck somehow returned 0. If this happens, the subsequent try_to_unmap() fails and returns non-zero (because page_mapcount() still > 0), and finally VM_BUG_ON() fires. This patch tries to fix it by prechecking pmd state inside ptl. Link: http://lkml.kernel.org/r/1466990929-7452-1-git-send-email-n-horiguchi@ah.jp.nec.com Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15vmlinux.lds: account for destructor sectionsDmitry Vyukov
If CONFIG_KASAN is enabled and gcc is configured with --disable-initfini-array and/or gold linker is used, gcc emits .ctors/.dtors and .text.startup/.text.exit sections instead of .init_array/.fini_array. .dtors section is not explicitly accounted in the linker script and messes vvar/percpu layout. We want: ffffffff822bfd80 D _edata ffffffff822c0000 D __vvar_beginning_hack ffffffff822c0000 A __vvar_page ffffffff822c0080 0000000000000098 D vsyscall_gtod_data ffffffff822c1000 A __init_begin ffffffff822c1000 D init_per_cpu__irq_stack_union ffffffff822c1000 A __per_cpu_load ffffffff822d3000 D init_per_cpu__gdt_page We got: ffffffff8279a600 D _edata ffffffff8279b000 A __vvar_page ffffffff8279c000 A __init_begin ffffffff8279c000 D init_per_cpu__irq_stack_union ffffffff8279c000 A __per_cpu_load ffffffff8279e000 D __vvar_beginning_hack ffffffff8279e080 0000000000000098 D vsyscall_gtod_data ffffffff827ae000 D init_per_cpu__gdt_page This happens because __vvar_page and .vvar get different addresses in arch/x86/kernel/vmlinux.lds.S: . = ALIGN(PAGE_SIZE); __vvar_page = .; .vvar : AT(ADDR(.vvar) - LOAD_OFFSET) { /* work around gold bug 13023 */ __vvar_beginning_hack = .; Discard .dtors/.fini_array/.text.exit, since we don't call dtors. Merge .text.startup into init text. Link: http://lkml.kernel.org/r/1467386363-120030-1-git-send-email-dvyukov@google.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: <stable@vger.kernel.org> [4.0+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15gcov: add support for gcc version >= 6Florian Meier
Link: http://lkml.kernel.org/r/20160701130914.GA23225@styxhp Signed-off-by: Florian Meier <Florian.Meier@informatik.uni-erlangen.de> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Tested-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15mm, meminit: ensure node is online before checking whether pages are ↵Mel Gorman
uninitialised early_page_uninitialised looks up an arbitrary PFN. While a machine without node 0 will boot with "mm, page_alloc: Always return a valid node from early_pfn_to_nid", it works because it assumes that nodes are always in PFN order. This is not guaranteed so this patch adds robustness by always checking if the node being checked is online. Link: http://lkml.kernel.org/r/1468008031-3848-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> [4.2+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15mm, meminit: always return a valid node from early_pfn_to_nidMel Gorman
early_pfn_to_nid can return node 0 if a PFN is invalid on machines that has no node 0. A machine with only node 1 was observed to crash with the following message: BUG: unable to handle kernel paging request at 000000000002a3c8 PGD 0 Modules linked in: Hardware name: Supermicro H8DSP-8/H8DSP-8, BIOS 080011 06/30/2006 task: ffffffff81c0d500 ti: ffffffff81c00000 task.ti: ffffffff81c00000 RIP: reserve_bootmem_region+0x6a/0xef CR2: 000000000002a3c8 CR3: 0000000001c06000 CR4: 00000000000006b0 Call Trace: free_all_bootmem+0x4b/0x12a mem_init+0x70/0xa3 start_kernel+0x25b/0x49b The problem is that early_page_uninitialised uses the early_pfn_to_nid helper which returns node 0 for invalid PFNs. No caller of early_pfn_to_nid cares except early_page_uninitialised. This patch has early_pfn_to_nid always return a valid node. Link: http://lkml.kernel.org/r/1468008031-3848-3-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> [4.2+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15kasan/quarantine: fix bugs on qlist_move_cache()Joonsoo Kim
There are two bugs on qlist_move_cache(). One is that qlist's tail isn't set properly. curr->next can be NULL since it is singly linked list and NULL value on tail is invalid if there is one item on qlist. Another one is that if cache is matched, qlist_put() is called and it will set curr->next to NULL. It would cause to stop the loop prematurely. These problems come from complicated implementation so I'd like to re-implement it completely. Implementation in this patch is really simple. Iterate all qlist_nodes and put them to appropriate list. Unfortunately, I got this bug sometime ago and lose oops message. But, the bug looks trivial and no need to attach oops. Fixes: 55834c59098d ("mm: kasan: initial memory quarantine implementation") Link: http://lkml.kernel.org/r/1467766348-22419-1-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: Alexander Potapenko <glider@google.com> Cc: Kuthonuzo Luruo <poll.stdin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15uapi: export lirc.h headerMauro Carvalho Chehab
This header contains the userspace API for lirc. This is a fixup for commit b7be755733dc ("[media] bz#75751: Move internal header file lirc.h to uapi/"). It moved the header to the right place, but it forgot to add it at Kbuild. So, despite being at uapi, it is not copied to the right place. Fixes: b7be755733dc44c72 ("[media] bz#75751: Move internal header file lirc.h to uapi/") Link: http://lkml.kernel.org/r/320c765d32bfc82c582e336d52ffe1026c73c644.1468439021.git.mchehab@s-opensource.com Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Alec Leamas <leamas.alec@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15madvise_free, thp: fix madvise_free_huge_pmd return value after splittingHuang Ying
madvise_free_huge_pmd should return 0 if the fallback PTE operations are required. In madvise_free_huge_pmd, if part pages of THP are discarded, the THP will be split and fallback PTE operations should be used if splitting succeeds. But the original code will make fallback PTE operations skipped, after splitting succeeds. Fix that via make madvise_free_huge_pmd return 0 after splitting successfully, so that the fallback PTE operations will be done. Link: http://lkml.kernel.org/r/1467135452-16688-1-git-send-email-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15Revert "scripts/gdb: add documentation example for radix tree"Kieran Bingham
This reverts commit 9b5580359a84 ("scripts/gdb: add documentation example for radix tree") The python implementation of radix tree was merged at the same time as a refactoring of the radix tree implementation and doesn't work. The feature is being reverted, thus we revert the documentation as well. Link: http://lkml.kernel.org/r/1467127337-11135-7-git-send-email-kieran@bingham.xyz Signed-off-by: Kieran Bingham <kieran@bingham.xyz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15Revert "scripts/gdb: add a Radix Tree Parser"Kieran Bingham
This reverts commit e127a73d41ac ("scripts/gdb: add a Radix Tree Parser") The python implementation of radix-tree was merged at the same time as the radix-tree system was heavily reworked from commit e9256efcc8e3 ("radix-tree: introduce radix_tree_empty") to 3bcadd6fa6c4 ("radix-tree: free up the bottom bit of exceptional entries for reuse") and no longer functions, but also prevents other gdb scripts from loading. This functionality has not yet hit a release, so simply remove it for now Link: http://lkml.kernel.org/r/1467127337-11135-6-git-send-email-kieran@bingham.xyz Signed-off-by: Kieran Bingham <kieran@bingham.xyz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15scripts/gdb: Perform path expansion to lx-symbol's argumentsNikolay Borisov
Python doesn't do automatic expansion of paths. In case one passes path of the from ~/foo/bar the gdb scripts won't automatically expand that and as a result the symbols files won't be loaded. Fix this by explicitly expanding all paths which begin with "~" Link: http://lkml.kernel.org/r/1467127337-11135-5-git-send-email-kieran@bingham.xyz Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com> Signed-off-by: Kieran Bingham <kieran@bingham.xyz> Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15scripts/gdb: add constants.py to .gitignoreOmar Sandoval
Since scripts/gdb/linux/constants.py is autogenerated, this should have been added to .gitignore when it was introduced. Fixes: f197d75fcad1 ("scripts/gdb: provide linux constants") Link: http://lkml.kernel.org/r/1467127337-11135-4-git-send-email-kieran@bingham.xyz Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Kieran Bingham <kieran@bingham.xyz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15scripts/gdb: rebuild constants.py on dependancy changeKieran Bingham
The autogenerated constants.py file was only being built on the initial call, and if the constants.py.in file changed. As we are utilising the CPP hooks, we can successfully use the call if_changed_dep rules to determine when to rebuild the file based on it's inclusions. Link: http://lkml.kernel.org/r/1467127337-11135-3-git-send-email-kieran@bingham.xyz Signed-off-by: Kieran Bingham <kieran@bingham.xyz> Reported-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15scripts/gdb: silence 'nothing to do' messageKieran Bingham
The constants.py generation, involves a rule to link into the main makefile. This rule has no command and generates a spurious warning message in the build logs when CONFIG_SCRIPTS_GDB is enabled. Fix simply by giving a no-op action Link: http://lkml.kernel.org/r/1467127337-11135-2-git-send-email-kieran@bingham.xyz Signed-off-by: Kieran Bingham <kieran@bingham.xyz> Reported-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15kasan: add newline to messagesDmitry Vyukov
Currently GPF messages with KASAN look as follows: kasan: GPF could be caused by NULL-ptr deref or user memory accessgeneral protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN Add newlines. Link: http://lkml.kernel.org/r/1467294357-98002-1-git-send-email-dvyukov@google.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15mm, compaction: prevent VM_BUG_ON when terminating freeing scannerDavid Rientjes
It's possible to isolate some freepages in a pageblock and then fail split_free_page() due to the low watermark check. In this case, we hit VM_BUG_ON() because the freeing scanner terminated early without a contended lock or enough freepages. This should never have been a VM_BUG_ON() since it's not a fatal condition. It should have been a VM_WARN_ON() at best, or even handled gracefully. Regardless, we need to terminate anytime the full pageblock scan was not done. The logic belongs in isolate_freepages_block(), so handle its state gracefully by terminating the pageblock loop and making a note to restart at the same pageblock next time since it was not possible to complete the scan this time. [rientjes@google.com: don't rescan pages in a pageblock] Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1607111244150.83138@chino.kir.corp.google.com Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1606291436300.145590@chino.kir.corp.google.com Signed-off-by: David Rientjes <rientjes@google.com> Reported-by: Minchan Kim <minchan@kernel.org> Tested-by: Minchan Kim <minchan@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15Merge tag 'stm-for-greg-20160714' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/ash/stm into char-misc-next Alexander writes: intel_th: Fixes -t://git.kernel.org/pub/scm/linux/kernel/git/ash/stm.git tags/stm-for-greg-20160714 stable These are: * a fix for a modprobe time deadlock * a new PCI ID for Kaby Lake PCH-H
2016-07-14devlink: fix trace format stringArnd Bergmann
Including devlink.h on ARM and probably other 32-bit architectures results in a harmless warning: In file included from ../include/trace/define_trace.h:95:0, from ../include/trace/events/devlink.h:51, from ../net/core/devlink.c:30: include/trace/events/devlink.h: In function 'trace_raw_output_devlink_hwmsg': include/trace/events/devlink.h:42:12: error: format '%lu' expects argument of type 'long unsigned int', but argument 10 has type 'size_t {aka unsigned int}' [-Werror=format=] The correct format string for 'size_t' is %zu, not %lu, this works on all architectures. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: e5224f0fe2ac ("devlink: add hardware messages tracing facility") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14tracing: change owner name to driver name for devlink hwmsg tracepointJiri Pirko
Turned on that driver->owner which is struct module is not available when modules are disabled. Better to depend on a driver name which is always available. Reported-by: Randy Dunlap <rdunlap@infradead.org> Fixes: e5224f0fe2 ("devlink: add hardware messages tracing facility") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14mlxsw: spectrum_router: Return -ENOENT in case of errorChristophe Jaillet
'vr' should be a valid pointer here, so returning 'PTR_ERR(vr)' is wrong. Return an explicit error code (-ENOENT) instead. Fixes: 61c503f976 ("mlxsw: spectrum_router: Implement fib4 add/del switchdev obj ops") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15ext4: verify extent header depthVegard Nossum
Although the extent tree depth of 5 should enough be for the worst case of 2*32 extents of length 1, the extent tree code does not currently to merge nodes which are less than half-full with a sibling node, or to shrink the tree depth if possible. So it's possible, at least in theory, for the tree depth to be greater than 5. However, even in the worst case, a tree depth of 32 is highly unlikely, and if the file system is maliciously corrupted, an insanely large eh_depth can cause memory allocation failures that will trigger kernel warnings (here, eh_depth = 65280): JBD2: ext4.exe wants too many credits credits:195849 rsv_credits:0 max:256 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 50 at fs/jbd2/transaction.c:293 start_this_handle+0x569/0x580 CPU: 0 PID: 50 Comm: ext4.exe Not tainted 4.7.0-rc5+ #508 Stack: 604a8947 625badd8 0002fd09 00000000 60078643 00000000 62623910 601bf9bc 62623970 6002fc84 626239b0 900000125 Call Trace: [<6001c2dc>] show_stack+0xdc/0x1a0 [<601bf9bc>] dump_stack+0x2a/0x2e [<6002fc84>] __warn+0x114/0x140 [<6002fdff>] warn_slowpath_null+0x1f/0x30 [<60165829>] start_this_handle+0x569/0x580 [<60165d4e>] jbd2__journal_start+0x11e/0x220 [<60146690>] __ext4_journal_start_sb+0x60/0xa0 [<60120a81>] ext4_truncate+0x131/0x3a0 [<60123677>] ext4_setattr+0x757/0x840 [<600d5d0f>] notify_change+0x16f/0x2a0 [<600b2b16>] do_truncate+0x76/0xc0 [<600c3e56>] path_openat+0x806/0x1300 [<600c55c9>] do_filp_open+0x89/0xf0 [<600b4074>] do_sys_open+0x134/0x1e0 [<600b4140>] SyS_open+0x20/0x30 [<6001ea68>] handle_syscall+0x88/0x90 [<600295fd>] userspace+0x3fd/0x500 [<6001ac55>] fork_handler+0x85/0x90 ---[ end trace 08b0b88b6387a244 ]--- [ Commit message modified and the extent tree depath check changed from 5 to 32 -- tytso ] Cc: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-07-15Merge branch 'drm-vmwgfx-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~syeh/repos_linux into drm-fixes A bunch of vmwgfx fixes that fix a black screen issue on latest distros/hw combos. * 'drm-vmwgfx-fixes' of git://people.freedesktop.org/~syeh/repos_linux: drm/vmwgfx: Fix error paths when mapping framebuffer drm/vmwgfx: Fix corner case screen target management drm/vmwgfx: Delay pinning fbdev framebuffer until after mode set drm/vmwgfx: Check pin count before attempting to move a buffer drm/ttm: Make ttm_bo_mem_compat available drm/vmwgfx: Add an option to change assumed FB bpp drm/vmwgfx: Work around mode set failure in 2D VMs drm/vmwgfx: Add a check to handle host message failure
2016-07-14ext4: short-cut orphan cleanup on errorVegard Nossum
If we encounter a filesystem error during orphan cleanup, we should stop. Otherwise, we may end up in an infinite loop where the same inode is processed again and again. EXT4-fs (loop0): warning: checktime reached, running e2fsck is recommended EXT4-fs error (device loop0): ext4_mb_generate_buddy:758: group 2, block bitmap and bg descriptor inconsistent: 6117 vs 0 free clusters Aborting journal on device loop0-8. EXT4-fs (loop0): Remounting filesystem read-only EXT4-fs error (device loop0) in ext4_free_blocks:4895: Journal has aborted EXT4-fs error (device loop0) in ext4_do_update_inode:4893: Journal has aborted EXT4-fs error (device loop0) in ext4_do_update_inode:4893: Journal has aborted EXT4-fs error (device loop0) in ext4_ext_remove_space:3068: IO failure EXT4-fs error (device loop0) in ext4_ext_truncate:4667: Journal has aborted EXT4-fs error (device loop0) in ext4_orphan_del:2927: Journal has aborted EXT4-fs error (device loop0) in ext4_do_update_inode:4893: Journal has aborted EXT4-fs (loop0): Inode 16 (00000000618192a0): orphan list check failed! [...] EXT4-fs (loop0): Inode 16 (0000000061819748): orphan list check failed! [...] EXT4-fs (loop0): Inode 16 (0000000061819bf0): orphan list check failed! [...] See-also: c9eb13a9105 ("ext4: fix hang when processing corrupted orphaned inode list") Cc: Jan Kara <jack@suse.cz> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2016-07-14ext4: fix reference counting bug on block allocation errorVegard Nossum
If we hit this error when mounted with errors=continue or errors=remount-ro: EXT4-fs error (device loop0): ext4_mb_mark_diskspace_used:2940: comm ext4.exe: Allocating blocks 5090-6081 which overlap fs metadata then ext4_mb_new_blocks() will call ext4_mb_release_context() and try to continue. However, ext4_mb_release_context() is the wrong thing to call here since we are still actually using the allocation context. Instead, just error out. We could retry the allocation, but there is a possibility of getting stuck in an infinite loop instead, so this seems safer. [ Fixed up so we don't return EAGAIN to userspace. --tytso ] Fixes: 8556e8f3b6 ("ext4: Don't allow new groups to be added during block allocation") Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: stable@vger.kernel.org
2016-07-14MAINTAINRES: fs-crypto maintainers updateTheodore Ts'o
Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: Jaegeuk Kim <jaegeuk@kernel.org>
2016-07-14net: ethernet: ll_temac: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net: ethernet: ll_temac: use phydev from struct net_devicePhilippe Reynes
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14Merge tag 'wireless-drivers-next-for-davem-2016-07-13' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.8 Major changes: iwlwifi * more work on the RX path for the 9000 device series * some more dynamic queue allocation work * SAR BIOS implementation * some work on debugging capabilities * added support for GCMP encryption * data path rework in preparation for new HW * some cleanup to remove transport dependency on mac80211 * support for MSIx in preparation for new HW * lots of work in preparation for HW support (9000 and a000 series) mwifiex * implement get_tx_power and get_antenna cfg80211 operation callbacks wl18xx * add support for 64bit clock rtl8xxxu * aggregation support (optional for now) Also wireless-drivers is merged to fix some conflicts. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15Merge tag 'drm-intel-fixes-2016-07-14' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes I've also realized that a pile of hang fixes for kbl landed in next, and no one thought of backporting it to 4.7 - kbl has lost prelim_hw_support tagging in 4.7-rc1 already. Mika is prepping a topic branch for those, will send you a separate pull request since it's quite a bit (but should be all well restricted to kbl code, so similar to polaris in amdgpu). * tag 'drm-intel-fixes-2016-07-14' of git://anongit.freedesktop.org/drm-intel: drm/i915: Ignore panel type from OpRegion on SKL drm/i915: Update ifdeffery for mutex->owner
2016-07-14bonding: set carrier off for devices created through netlinkBeniamino Galvani
Commit e826eafa65c6 ("bonding: Call netif_carrier_off after register_netdevice") moved netif_carrier_off() from bond_init() to bond_create(), but the latter is called only for initial default devices and ones created through sysfs: $ modprobe bonding $ echo +bond1 > /sys/class/net/bonding_masters $ ip link add bond2 type bond $ grep "MII Status" /proc/net/bonding/* /proc/net/bonding/bond0:MII Status: down /proc/net/bonding/bond1:MII Status: down /proc/net/bonding/bond2:MII Status: up Ensure that carrier is initially off also for devices created through netlink. Signed-off-by: Beniamino Galvani <bgalvani@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15Merge branch 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Two more polaris fixes. * 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: fix power distribution issue for Polaris10 XT drm/amdgpu: Add a missing register to Polaris golden setting
2016-07-14Merge branch 'pktgen-scripts'David S. Miller
Jesper Dangaard Brouer says: ==================== pktgen samples: new scripts and removing older samples This patchset is adding some pktgen sample scripts that I've been using for a while[1], and they seams to relevant for more people. Patchset also remove some of the older style pktgen samples. [1] https://github.com/netoptimizer/network-testing/tree/master/pktgen ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14pktgen: remove sample script pktgen.conf-1-1-rdosJesper Dangaard Brouer
Removing the pktgen sample script pktgen.conf-1-1-rdos, because it does not contain anything that is not covered by the other and newer style sample scripts. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14pktgen: add sample script pktgen_sample05_flow_per_thread.shJesper Dangaard Brouer
This pktgen sample script is useful for scalability testing a receiver. The script will simply generate one flow per thread (option -t N) using the thread number as part of the source IP-address. The single flow sample (pktgen_sample03_burst_single_flow.sh) have become quite popular, but it is important that developers also make sure to benchmark scalability of multiple receive queues. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14pktgen: add sample script pktgen_sample04_many_flows.shJesper Dangaard Brouer
Adding a pktgen sample script that demonstrates how to use pktgen for simulating flows. Script will generate a certain number of concurrent flows ($FLOWS) and each flow will contain $FLOWLEN packets, which will be send back-to-back, before switching to a new flow, due to flag FLOW_SEQ. This script obsoletes the old sample script 'pktgen.conf-1-1-flows', which is removed. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14drm/amdgpu: fix power distribution issue for Polaris10 XTKen Wang
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-14drm/amdgpu: Add a missing register to Polaris golden settingKen Wang
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-14Merge branch 'mlx5-bulk-flow-stats-sriov-tc-offloads'David S. Miller
Saeed Mahameed says: ==================== Mellanox 100G mlx5 Bulk flow statistics and SRIOV TC offloads This series from Amir and Or deals with two enhancements for the mlx5 TC offloads. The 1st two patches add bulk reading of flow counters. Few bulk counter queries are used instead of issuing thousands firmware commands per second to get statistics of all flows set to HW. The next patches add TC based SRIOV offloading to mlx5, as a follow up for the e-switch offloads mode and the VF representors. When the e-switch is set to the (new) "offloads" mode, we can now offload TC/flower drop and forward rules, the forward action we offload is TC mirred/redirect. The above is done by the VF representor netdevices exporting the setup_tc ndo where from there we're re-using and enhancing the existing mlx5 TC offloads sub-module which now works for both the NIC and the SRIOV cases. The series is applied on top b38a75d2d324 ('mlxsw: core: Trace EMAD messages') and it has no merge issues with the on-going net submission ('mlx5 tx timeout watchdog fixes') V2: - Fixed compilation warning. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net/mlx5e: Add TC offload support for the VF representors netdeviceOr Gerlitz
The VF representors support only TC filter/action offloads (not mqprio) and this is enabled for them by default. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net/mlx5e: Add TC HW support for FDB (SRIOV e-switch) offloadsOr Gerlitz
Enhance the TC offload code such that when the eswitch exists and it's mode being SRIOV offloads, we do TC actions parsing and setup targeted for eswitch. Next, we add the offloaded flow to the HW e-switch (fdb). Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net/mlx5e: Add TC drop and mirred/redirect action parsing for SRIOV offloadsOr Gerlitz
Add the setup code that parses the TC actions needed to support offloading drop and mirred/redirect for SRIOV e-switch. We can redirect between two devices if they belong to the same HW switch, compare the switchdev HW ID attribute to enforce that. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net/switchdev: Export the same parent ID service functionOr Gerlitz
This helper serves to know if two switchdev port netdevices belong to the same HW ASIC, e.g to figure out if forwarding offload is possible between them. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net/mlx5e: Adjustments in the TC offload code towards reuse for SRIOVOr Gerlitz
Towards reusing the TC offloads code for an SRIOV use-case, change some of the helper functions to have _nic in their names so it's clear what's NIC unique and what's general. Also group together the NIC related helpers so we can easily branch per the use-case in downstream patch. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net/mlx5: E-Switch, Add API to configure rules for the offloaded modeOr Gerlitz
This allows for upper levels in the driver, e.g the TC offload code to add e-switch offloaded steering rules. The caller provides the rule spec for matching, action, source and destination vports. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net/mlx5: E-Switch, Use two priorities for SRIOV offloads modeOr Gerlitz
In the offloads mode, some slow path rules are added by the driver (e.g send-to-vport), while offloaded rules are to be added from upper layers. The slow path rules have lower priority and we don't want matching on offloaded rules to suffer from extra steering hops related to the slow path rules. We use two priorities, one for offloaded rules (fast path), and one for the control rules (slow path). To allow for that, we enable two priorities for the FDB namespace in the FS core code. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net/mlx5e: Offload TC flow counters only when supportedOr Gerlitz
Currenly, the code that programs the flow actions into the firmware doesn't check if was actually asked to offload the statistics, fix that. Fixes: aad7e08d39bd ('net/mlx5e: Hardware offloaded flower filter statistics support') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net/mlx5: Introduce bulk reading of flow countersAmir Vadai
This commit utilize the ability of ConnectX-4 to bulk read flow counters. Few bulk counter queries could be done instead of issuing thousands of firmware commands per second to get statistics of all flows set to HW, such as those programmed when we offload tc filters. Counters are stored sorted by hardware id, and queried in blocks (id + number of counters). Due to hardware requirement, start of block and number of counters in a block must be four aligned. Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Amir Vadai <amir@vadai.me> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net/mlx5: Store counters in rbtree instead of listAmir Vadai
In order to use bulk counters, we need to have counters sorted by id. Signed-off-by: Amir Vadai <amir@vadai.me> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14x86/reboot: Add Dell Optiplex 7450 AIO reboot quirkAlex Hung
Dell Optiplex 7450 AIO works with BOOT_ACPI; however, the quirk for "OptiPlex 745" changes its boot method to BOOT_BIOS and causes 7450 AIO hangs when rebooting; as a result, 7450 AIO is appended to overwrite BOOT_BIOS by BOOT_ACPI in order not to break the original 745 series Signed-off-by: Alex Hung <alex.hung@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-14KVM: SVM: do not set MSR_TSC_AUX on 32-bit buildsPaolo Bonzini
This is unnecessary---and besides, __getcpu() is not even available on 32-bit builds. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-15 12:09:42 +0000