summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-07-22f2fs: get victim segment again after new cpYunlei He
Previous selected segment may become free after write_checkpoint, if we do garbage collect on this segment, and then new_curseg happen to reuse it, it may cause f2fs_bug_on as below. panic+0x154/0x29c do_garbage_collect+0x15c/0xaf4 f2fs_gc+0x2dc/0x444 f2fs_balance_fs.part.22+0xcc/0x14c f2fs_balance_fs+0x28/0x34 f2fs_map_blocks+0x5ec/0x790 f2fs_preallocate_blocks+0xe0/0x100 f2fs_file_write_iter+0x64/0x11c new_sync_write+0xac/0x11c vfs_write+0x144/0x1e4 SyS_write+0x60/0xc0 Here, maybe we check sit and ssa type during reset_curseg. So, we check segment is stale or not, and select a new victim to avoid this. Signed-off-by: Yunlei He <heyunlei@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-07-22netfilter: connlabels: move set helper to xt_connlabelFlorian Westphal
xt_connlabel is the only user so move it. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-07-22netfilter: conntrack: support a fixed size of 128 distinct labelsFlorian Westphal
The conntrack label extension is currently variable-sized, e.g. if only 2 labels are used by iptables rules then the labels->bits[] array will only contain one element. We track size of each label storage area in the 'words' member. But in nftables and openvswitch we always have to ask for worst-case since we don't know what bit will be used at configuration time. As most arches are 64bit we need to allocate 24 bytes in this case: struct nf_conn_labels { u8 words; /* 0 1 */ /* XXX 7 bytes hole, try to pack */ long unsigned bits[2]; /* 8 24 */ Make bits a fixed size and drop the words member, it simplifies the code and only increases memory requirements on x86 when less than 64bit labels are required. We still only allocate the extension if its needed. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-07-22MAINTAINERS: Add INTEL MERRIFIELD GPIO entryAndy Shevchenko
Add gpio-merrifield.c to MAINTAINERS database per Linus' ask. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22gpio: dwapb: add missing fwnode_handle_put() in dwapb_gpio_get_pdata()Wei Yongjun
fwnode_handle_put() should be used when terminating device_for_each_child_node() iteration with break or return to prevent stale device node references from being left behind. Generated by Coccinelle. Fixes: 4ba8cfa79f44 ("gpio: dwapb: convert device node to fwnode") Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22gpio: merrifield: Protect irq_ack() and gpio_set() by lockAndy Shevchenko
There is a potential race when two threads do the writes to the same register in parallel. Prevent out of order in such case by protecting I/O access by spin lock. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22gpio: merrifield: Introduce GPIO driver to support MerrifieldAndy Shevchenko
Intel Merrifield platform has a special GPIO controller to drive pads when they are muxed in corresponding mode. Intel Merrifield GPIO IP is slightly different here and there in comparison to the older Intel MID platforms. These differences include in particular the shaked register offsets, specific support of level triggered interrupts and wake capable sources, as well as a pinctrl which is a separate IP. Instead of uglifying existing driver I decide to provide a new one slightly based on gpio-intel-mid.c. So, anyone can easily compare what changes are happened to be here. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Brian J Wood <brian.j.wood@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22gpio: intel-mid: Make it depend to X86_INTEL_MIDAndy Shevchenko
This GPIO controller is a part of Intel MID platforms which are somehow different to pure PCs. Thus, there is no need that driver is compiled for them. Replace dependency to X86_INTEL_MID. While here, fix capitalization of MID abbreviation. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22gpio: intel-mid: Sort header block alphabeticallyAndy Shevchenko
Sort the header inclusion lines by alphabetical order. While here, update Intel Copyright. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22gpio: intel-mid: Remove potentially harmful codeAndy Shevchenko
The commit d56d6b3d7d69 ("gpio: langwell: add Intel Merrifield support") doesn't look at all as a proper support for Intel Merrifield and I dare to say that it distorts the behaviour of the hardware. The register map is different on Intel Merrifield, i.e. only 6 out of 8 register have the same purpose but none of them has same location in the address space. The current case potentially harmful to existing hardware since it's poking registers on wrong offsets and may set some pin to be GPIO output when connected hardware doesn't expect such. Besides the above GPIO and pinctrl on Intel Merrifield have been located in different IP blocks. The functionality has been extended as well, i.e. added support of level interrupts, special registers for wake capable sources and thus, in my opinion, requires a completele separate driver. If someone wondering the existing gpio-intel-mid.c would be converted to actual pinctrl (which by the fact it is now), though I wouldn't be a volunteer to do that. Fixes: d56d6b3d7d69 ("gpio: langwell: add Intel Merrifield support") Cc: stable@vger.kernel.org # v3.13+ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22gpio: rcar: add R8A7792 supportSergei Shtylyov
Renesas R8A7792 SoC is a member of the R-Car gen2 family, add support for its GPIO controllers. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22gpiolib: remove duplicated include from gpiolib.cWei Yongjun
Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22gpio: tegra: don't auto-enable for COMPILE_TESTArnd Bergmann
I stumbled over a build error with COMPILE_TEST and CONFIG_OF disabled: drivers/gpio/gpio-tegra.c: In function 'tegra_gpio_probe': drivers/gpio/gpio-tegra.c:603:9: error: 'struct gpio_chip' has no member named 'of_node' The problem is that the newly added GPIO_TEGRA Kconfig symbol does not have a dependency on CONFIG_OF. However, there is another problem here as the driver gets enabled unconditionally whenever COMPILE_TEST is set. This fixes both problems, by making the symbol user-visible when COMPILE_TEST is set and default-enabled for ARCH_TEGRA=y. As a side-effect, it is now possible to compile-test a Tegra kernel with GPIO support disabled, which is harmless. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 4dd4dd1d2120 ("gpio: tegra: Allow compile test") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22libceph: apply new_state before new_up_client on incrementalsIlya Dryomov
Currently, osd_weight and osd_state fields are updated in the encoding order. This is wrong, because an incremental map may look like e.g. new_up_client: { osd=6, addr=... } # set osd_state and addr new_state: { osd=6, xorstate=EXISTS } # clear osd_state Suppose osd6's current osd_state is EXISTS (i.e. osd6 is down). After applying new_up_client, osd_state is changed to EXISTS | UP. Carrying on with the new_state update, we flip EXISTS and leave osd6 in a weird "!EXISTS but UP" state. A non-existent OSD is considered down by the mapping code 2087 for (i = 0; i < pg->pg_temp.len; i++) { 2088 if (ceph_osd_is_down(osdmap, pg->pg_temp.osds[i])) { 2089 if (ceph_can_shift_osds(pi)) 2090 continue; 2091 2092 temp->osds[temp->size++] = CRUSH_ITEM_NONE; and so requests get directed to the second OSD in the set instead of the first, resulting in OSD-side errors like: [WRN] : client.4239 192.168.122.21:0/2444980242 misdirected client.4239.1:2827 pg 2.5df899f2 to osd.4 not [1,4,6] in e680/680 and hung rbds on the client: [ 493.566367] rbd: rbd0: write 400000 at 11cc00000 (0) [ 493.566805] rbd: rbd0: result -6 xferred 400000 [ 493.567011] blk_update_request: I/O error, dev rbd0, sector 9330688 The fix is to decouple application from the decoding and: - apply new_weight first - apply new_state before new_up_client - twiddle osd_state flags if marking in - clear out some of the state if osd is destroyed Fixes: http://tracker.ceph.com/issues/14901 Cc: stable@vger.kernel.org # 3.15+: 6dd74e44dc1d: libceph: set 'exists' flag for newly up osd Cc: stable@vger.kernel.org # 3.15+ Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Josh Durgin <jdurgin@redhat.com>
2016-07-22xen-blkback: really don't leak mode propertyJan Beulich
Commit 9d092603cc ("xen-blkback: do not leak mode property") left one path unfixed; correct this. Acked-by: Jens Axboe <axboe@kernel.dk> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2016-07-22xen-blkback: constify instance of "struct attribute_group"Jan Beulich
The functions these get passed to have been taking pointers to const since at least 2.6.16. Acked-by: Jens Axboe <axboe@kernel.dk> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2016-07-22xen-blkfront: prefer xenbus_scanf() over xenbus_gather()Jan Beulich
... for single items being collected: It is more typesafe (as the compiler can check format string and to-be-written-to variable match) and requires one less parameter to be passed. Acked-by: Roger Pau Monné <roger.pau@citrix.com> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2016-07-22xen-blkback: prefer xenbus_scanf() over xenbus_gather()Jan Beulich
... for single items being collected: It is more typesafe (as the compiler can check format string and to-be-written-to variable match) and requires one less parameter to be passed. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Acked-by: Jens Axboe <axboe@kernel.dk>
2016-07-22PM / hibernate: Introduce test_resume mode for hibernationChen Yu
test_resume mode is to verify if the snapshot data written to swap device can be successfully restored to memory. It is useful to ease the debugging process on hibernation, since this mode can not only bypass the BIOSes/bootloader, but also the system re-initialization. To avoid the risk to break the filesystm on persistent storage, this patch resumes the image with tasks frozen. For example: echo test_resume > /sys/power/disk echo disk > /sys/power/state [ 187.306470] PM: Image saving progress: 70% [ 187.395298] PM: Image saving progress: 80% [ 187.476697] PM: Image saving progress: 90% [ 187.554641] PM: Image saving done. [ 187.558896] PM: Wrote 594600 kbytes in 0.90 seconds (660.66 MB/s) [ 187.566000] PM: S| [ 187.589742] PM: Basic memory bitmaps freed [ 187.594694] PM: Checking hibernation image [ 187.599865] PM: Image signature found, resuming [ 187.605209] PM: Loading hibernation image. [ 187.665753] PM: Basic memory bitmaps created [ 187.691397] PM: Using 3 thread(s) for decompression. [ 187.691397] PM: Loading and decompressing image data (148650 pages)... [ 187.889719] PM: Image loading progress: 0% [ 188.100452] PM: Image loading progress: 10% [ 188.244781] PM: Image loading progress: 20% [ 189.057305] PM: Image loading done. [ 189.068793] PM: Image successfully loaded Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-22cpufreq: export cpufreq_driver_resolve_freq()Steve Muckle
Export cpufreq_driver_resolve_freq() since governors may be compiled as modules. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Steve Muckle <smuckle@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Herbert Xu
Merge the crypto tree to resolve conflict in rsa-pkcs1pad.
2016-07-22crypto: rsa-pkcs1pad - fix rsa-pkcs1pad request structHerbert Xu
To allow for child request context the struct akcipher_request child_req needs to be at the end of the structure. Cc: stable@vger.kernel.org Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-22x86/boot: Simplify EBDA-vs-BIOS reservation logicAndy Lutomirski
Both the intent and the effect of reserve_bios_regions() is simple: reserve the range from the apparent BIOS start (suitably filtered) through 1MB and, if the EBDA start address is sensible, extend that reservation downward to cover the EBDA as well. The code is overcomplicated, though, and contains head-scratchers like: if (ebda_start < BIOS_START_MIN) ebda_start = BIOS_START_MAX; That snipped is trying to say "if ebda_start < BIOS_START_MIN, ignore it". Simplify it: reorder the code so that it makes sense. This should have no functional effect under any circumstances. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Mario Limonciello <mario_limonciello@dell.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Link: http://lkml.kernel.org/r/ef89c0c761be20ead8bd9a3275743e6259b6092a.1469135598.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-22x86/boot: Clarify what x86_legacy_features.reserve_bios_regions doesAndy Lutomirski
It doesn't just control probing for the EBDA -- it controls whether we detect and reserve the <1MB BIOS regions in general. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Mario Limonciello <mario_limonciello@dell.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Link: http://lkml.kernel.org/r/55bd591115498440d461857a7b64f349a5d911f3.1469135598.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-22ixgbe: cleanup crosstalk fixDon Skidmore
This patch address a few issues with the initial crosstalk fix. Most important of which is the SDP that indicates the presents of a SFP+ module changes between HW types. With this change that is taken in to consideration It also moves the check closer to the base code that checks link. This makes it so we only need to do the check in one spot. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22ixgbe: remove redundant check on ret_valColin Ian King
The last check on ret_val is redundant since ret_val has not changed since the previous check, so remove it as it is extraneous. Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22ixgbevf: Commonize mailbox write/readTony Nguyen
With changes to ixgbevf_write_msg_read_ack(), other functions are performing the same operations done here; change those functions to utilize ixgbevf_write_msg_read_ack(). Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22ovl: verify upper dentry in ovl_remove_and_whiteout()Maxim Patlasov
The upper dentry may become stale before we call ovl_lock_rename_workdir. For example, someone could (mistakenly or maliciously) manually unlink(2) it directly from upperdir. To ensure it is not stale, let's lookup it after ovl_lock_rename_workdir and and check if it matches the upper dentry. Essentially, it is the same problem and similar solution as in commit 11f3710417d0 ("ovl: verify upper dentry before unlink and rename"). Signed-off-by: Maxim Patlasov <mpatlasov@virtuozzo.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org>
2016-07-22ixgbevf: Add range checking for setting MTUTony Nguyen
Currently when setting the VF's MTU, the PF can return a NACK but this isn't passed on to the VF. Propagate the results from the PF to the VF so errors can be reported. In ixgbevf_change_mtu, return an error and reject the change. For ixgbevf_configure_rx, log the error for debugging purposes since the function is buried in a series of Rx config routines that are void. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22ixgbevf: Protect ixgbevf_reset_subtask from remove eventDon Skidmore
In ixgbevf_reset_subtask We weren't verifying that the port haven't been removed, we are with this patch. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22ixgbe: Add missing destroy_workqueue() on error in ixgbe_init_module()Wei Yongjun
Add the missing destroy_workqueue() before return from ixgbe_init_module() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22ixgbevf: Add lock around ixgbevf_reinit_locked callDon Skidmore
The function ixgbevf_reinit_locked() assumes you have the rtnl lock however we didn't when calling from the service task. This patch corrects that. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22ixgbe: fix setup_fc for x550emEmil Tantilov
mac->ops.setup_fc can be null for backplanes which can cause the driver to crash on load. Reported-by: Patrick McLean <patrickm@gaikai.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22ixgbevf: add VF support for new hardwareDon Skidmore
This patch add VF support for the new X553 hardware. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22ixgbe: Fix minor typo while freeing irqBabu Moger
The array subscript increments after the execution of the statement. So there is no issue here. However it helps to read the code better. Signed-off-by: Babu Moger <babu.moger@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22ixgbe: Change register variable to unsignedDon Skidmore
I noticed this variable used for register reads wasn't an unsigned so this patch corrects that. I don't believe this was causing any issue as is but this is more consistent with the rest of the driver. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22ixgbevf: bump version numberDon Skidmore
Bump the version number to more closely match the function included in the driver. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22ixgbevf: Correct parameter sent to LED functionDon Skidmore
The second parameter of these functions is the index to the led we are interested in affecting. However we were mistakenly passing the offset in the register. This patch corrects that and adds some bonds checking which would hopefully make bugs like this more noticeable in the future. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22ixgbevf: fix NACK check in ixgbevf_set_uc_addr_vf()Emil Tantilov
Fix the NACK check in ixgbevf_set_uc_addr_vf() for instances where index != 0. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: Explicitly write platform-specific mac address after PF resetTushar Dave
i40e PF reset clears mac filters. If platform-specific mac address is used, driver has to explicitly write default mac address to mac filters otherwise all incoming traffic destined to default mac address will be dropped after reset. This issue was found on SPARC while toggling i40e ntuple via ethtool. Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: add missing link advertise settingStefan Assmann
Adding the missing link advertise for some X710 NICs. This can be observed by simply calling ethtool on the interface. root@rhel7:~ # ethtool eth0 Settings for eth0: Supported ports: [ FIBRE ] Supported link modes: 10000baseT/Full Supported pause frame use: Symmetric Supports auto-negotiation: No Advertised link modes: Not reported [...] With fix applied. root@rhel7:~ # ethtool eth0 Settings for eth0: Supported ports: [ FIBRE ] Supported link modes: 10000baseT/Full Supported pause frame use: Symmetric Supports auto-negotiation: No Advertised link modes: 10000baseT/Full [...] Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: Move the mutex lock in i40e_client_unregisterCatherine Sullivan
We need to lock the client list around the i40e_client_release call to prevent the release from interrupting the client instances while they are being added. Change-Id: I99993f20179aaf8730207833e7d0869d2ccffa1d Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: Remove redundant memsetAmitoj Kaur Chawla
Remove redundant call to memset before a call to memcpy. The Coccinelle semantic patch used to make this change is as follows: @@ expression e1,e2,e3,e4; @@ - memset(e1,e2,e3); memcpy(e1,e4,e3); Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e/i40evf-bump version to 1.6.11Bimmy Pujari
Signed-off-by: Bimmy Pujari <bimmy.pujari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: refactor Rx filter handlingMitch Williams
Properly track filter adds and deletes so the driver doesn't lose filters during resets and up/down cycles. Add a tracking mechanism so that the driver knows when to enter and leave promiscuous mode. Implement a simple state machine so the driver can track the status of each filter throughout its lifecycle. Properly manage the overflow promiscuous state for the each VSI, and provide a way for the driver to detect when to exit overflow promiscuous mode. Remove all possible default MAC filters that the firmware may have set up so that the driver can manage these correctly, particularly when VLANs come into play. Remove the LAA flag for filters; instead just send whatever we get through set_mac to the firmware as the LAA for wakeup purposes. Finally, add the state of each filter to debugfs output so we can see what's going on inside the driver's pointy little head. Change-ID: I97c5e366fac2254fa01eaff4f65c0af61dcf2e1f Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40evf: add hyperv dev idsJoshua Hay
This patch adds the Hyper-V specific VF device ids. Change-ID: I9c4fe6d8dfd34f7f68ebc9fdae225c8768439c89 Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: Remove device ID 0x37D4Catherine Sullivan
This device ID is not needed, so take it out. Change-ID: I148d29f68a1f58b03980ecd83047a1b440f4f74d Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e/i40evf: remove useless initializerMitch Williams
This initializer isn't needed because the variable is assigned right away. Change-ID: I6ce3edb3f4e0364db248a7a0bcc62ca95c01d941 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: Fix to show correct Advertised Link Modes when link is downAvinash Dayanand
When link is down, Advertised Link Modes was wrongly displaying full supported link modes instead of Advertised link mode. Added conditional checks in order to make sure correct Advertised link modes are displayed when the link is down. Change-ID: I8a61413f9ee174149c7a33157b5f0b0a8da9842d Signed-off-by: Avinash Dayanand <avinash.dayanand@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: avoid null pointer dereferenceHeinrich Schuchardt
In function i40e_debug_aq parameter desc is assumed to be possibly NULL. Do not dereference it before checking the value. Fixes: f905dd62be88 ("i40e/i40evf: add max buf len to aq debug print helper") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit (git 2.34.1) at 2025-09-12 02:36:02 +0000