summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-01-31ASoC: soc-dai.h: add snd_soc_dai_tdm_mask_set/get() helperKuninori Morimoto
Current ASoC has tx/rx_mask, and is directly accessing to them, but accessing to it via function is nice idea. This patch adds snd_soc_dai_tdm_mask_set/get() for it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/878rhjfor8.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-31ASoC: soc-dai.h: add snd_soc_dai_dma_data_set/get() for low levelKuninori Morimoto
Current ASoC has snd_soc_dai_set/get_dma_data() which is assuming struct snd_pcm_substream to get Playback/Capture direction. But, many drivers want to use it not through snd_pcm_substream. This patch adds more low level snd_soc_dai_dma_data_set/get() for it, and previous functions will be macro for it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/87a61zfori.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-31ASoC: soc-dai.h: add missing snd_soc_dai_set_widget()Kuninori Morimoto
Current ASoC has snd_soc_dai_get_widget() (= _get_) but doesn't have _set_ function. This patch adds it. This patch also cleanup unnecessary line break for _get_ function. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/87bkmfforp.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-31powerpc/64s/radix: Fix RWX mapping with relocated kernelMichael Ellerman
If a relocatable kernel is loaded at a non-zero address and told not to relocate to zero (kdump or RELOCATABLE_TEST), the mapping of the interrupt code at zero is left with RWX permissions. That is a security weakness, and leads to a warning at boot if CONFIG_DEBUG_WX is enabled: powerpc/mm: Found insecure W+X mapping at address 00000000056435bc/0xc000000000000000 WARNING: CPU: 1 PID: 1 at arch/powerpc/mm/ptdump/ptdump.c:193 note_page+0x484/0x4c0 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.2.0-rc1-00001-g8ae8e98aea82-dirty #175 Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,git-dd0dca hv:linux,kvm pSeries NIP: c0000000004a1c34 LR: c0000000004a1c30 CTR: 0000000000000000 REGS: c000000003503770 TRAP: 0700 Not tainted (6.2.0-rc1-00001-g8ae8e98aea82-dirty) MSR: 8000000002029033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 24000220 XER: 00000000 CFAR: c000000000545a58 IRQMASK: 0 ... NIP note_page+0x484/0x4c0 LR note_page+0x480/0x4c0 Call Trace: note_page+0x480/0x4c0 (unreliable) ptdump_pmd_entry+0xc8/0x100 walk_pgd_range+0x618/0xab0 walk_page_range_novma+0x74/0xc0 ptdump_walk_pgd+0x98/0x170 ptdump_check_wx+0x94/0x100 mark_rodata_ro+0x30/0x70 kernel_init+0x78/0x1a0 ret_from_kernel_thread+0x5c/0x64 The fix has two parts. Firstly the pages from zero up to the end of interrupts need to be marked read-only, so that they are left with R-X permissions. Secondly the mapping logic needs to be taught to ensure there is a page boundary at the end of the interrupt region, so that the permission change only applies to the interrupt text, and not the region following it. Fixes: c55d7b5e6426 ("powerpc: Remove STRICT_KERNEL_RWX incompatibility with RELOCATABLE") Reported-by: Sachin Sant <sachinp@linux.ibm.com> Tested-by: Sachin Sant <sachinp@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230110124753.1325426-2-mpe@ellerman.id.au
2023-01-31powerpc/64s/radix: Fix crash with unaligned relocated kernelMichael Ellerman
If a relocatable kernel is loaded at an address that is not 2MB aligned and told not to relocate to zero, the kernel can crash due to mark_rodata_ro() incorrectly changing some read-write data to read-only. Scenarios where the misalignment can occur are when the kernel is loaded by kdump or using the RELOCATABLE_TEST config option. Example crash with the kernel loaded at 5MB: Run /sbin/init as init process BUG: Unable to handle kernel data access on write at 0xc000000000452000 Faulting instruction address: 0xc0000000005b6730 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries CPU: 1 PID: 1 Comm: init Not tainted 6.2.0-rc1-00011-g349188be4841 #166 Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,git-5b4c5a hv:linux,kvm pSeries NIP: c0000000005b6730 LR: c000000000ae9ab8 CTR: 0000000000000380 REGS: c000000004503250 TRAP: 0300 Not tainted (6.2.0-rc1-00011-g349188be4841) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 44288480 XER: 00000000 CFAR: c0000000005b66ec DAR: c000000000452000 DSISR: 0a000000 IRQMASK: 0 ... NIP memset+0x68/0x104 LR zero_user_segments.constprop.0+0xa8/0xf0 Call Trace: ext4_mpage_readpages+0x7f8/0x830 ext4_readahead+0x48/0x60 read_pages+0xb8/0x380 page_cache_ra_unbounded+0x19c/0x250 filemap_fault+0x58c/0xae0 __do_fault+0x60/0x100 __handle_mm_fault+0x1230/0x1a40 handle_mm_fault+0x120/0x300 ___do_page_fault+0x20c/0xa80 do_page_fault+0x30/0xc0 data_access_common_virt+0x210/0x220 This happens because mark_rodata_ro() tries to change permissions on the range _stext..__end_rodata, but _stext sits in the middle of the 2MB page from 4MB to 6MB: radix-mmu: Mapped 0x0000000000000000-0x0000000000200000 with 2.00 MiB pages (exec) radix-mmu: Mapped 0x0000000000200000-0x0000000000400000 with 2.00 MiB pages radix-mmu: Mapped 0x0000000000400000-0x0000000002400000 with 2.00 MiB pages (exec) The logic that changes the permissions assumes the linear mapping was split correctly at boot, so it marks the entire 2MB page read-only. That leads to the write fault above. To fix it, the boot time mapping logic needs to consider that if the kernel is running at a non-zero address then _stext is a boundary where it must split the mapping. That leads to the mapping being split correctly, allowing the rodata permission change to take happen correctly, with no spillover: radix-mmu: Mapped 0x0000000000000000-0x0000000000200000 with 2.00 MiB pages (exec) radix-mmu: Mapped 0x0000000000200000-0x0000000000400000 with 2.00 MiB pages radix-mmu: Mapped 0x0000000000400000-0x0000000000500000 with 64.0 KiB pages radix-mmu: Mapped 0x0000000000500000-0x0000000000600000 with 64.0 KiB pages (exec) radix-mmu: Mapped 0x0000000000600000-0x0000000002400000 with 2.00 MiB pages (exec) If the kernel is loaded at a 2MB aligned address, the mapping continues to use 2MB pages as before: radix-mmu: Mapped 0x0000000000000000-0x0000000000200000 with 2.00 MiB pages (exec) radix-mmu: Mapped 0x0000000000200000-0x0000000000400000 with 2.00 MiB pages radix-mmu: Mapped 0x0000000000400000-0x0000000002c00000 with 2.00 MiB pages (exec) radix-mmu: Mapped 0x0000000002c00000-0x0000000100000000 with 2.00 MiB pages Fixes: c55d7b5e6426 ("powerpc: Remove STRICT_KERNEL_RWX incompatibility with RELOCATABLE") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230110124753.1325426-1-mpe@ellerman.id.au
2023-01-31powerpc/kexec_file: Fix division by zero in extra size estimationMichael Ellerman
In kexec_extra_fdt_size_ppc64() there's logic to estimate how much extra space will be needed in the device tree for some memory related properties. That logic uses the size of RAM divided by drmem_lmb_size() to do the estimation. However drmem_lmb_size() can be zero if the machine has no hotpluggable memory configured, which is the case when booting with qemu and no maxmem=x parameter is passed (the default). The division by zero is reported by UBSAN, and can also lead to an overflow and a warning from kvmalloc, and kdump kernel loading fails: WARNING: CPU: 0 PID: 133 at mm/util.c:596 kvmalloc_node+0x15c/0x160 Modules linked in: CPU: 0 PID: 133 Comm: kexec Not tainted 6.2.0-rc5-03455-g07358bd97810 #223 Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1200 0xf000005 of:SLOF,git-dd0dca pSeries NIP: c00000000041ff4c LR: c00000000041fe58 CTR: 0000000000000000 REGS: c0000000096ef750 TRAP: 0700 Not tainted (6.2.0-rc5-03455-g07358bd97810) MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24248242 XER: 2004011e CFAR: c00000000041fed0 IRQMASK: 0 ... NIP kvmalloc_node+0x15c/0x160 LR kvmalloc_node+0x68/0x160 Call Trace: kvmalloc_node+0x68/0x160 (unreliable) of_kexec_alloc_and_setup_fdt+0xb8/0x7d0 elf64_load+0x25c/0x4a0 kexec_image_load_default+0x58/0x80 sys_kexec_file_load+0x5c0/0x920 system_call_exception+0x128/0x330 system_call_vectored_common+0x15c/0x2ec To fix it, skip the calculation if drmem_lmb_size() is zero. Fixes: 2377c92e37fe ("powerpc/kexec_file: fix FDT size estimation for kdump kernel") Cc: stable@vger.kernel.org # v5.12+ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230130014707.541110-1-mpe@ellerman.id.au
2023-01-31serial: 8250_dma: Fix DMA Rx rearm raceIlpo Järvinen
As DMA Rx can be completed from two places, it is possible that DMA Rx completes before DMA completion callback had a chance to complete it. Once the previous DMA Rx has been completed, a new one can be started on the next UART interrupt. The following race is possible (uart_unlock_and_check_sysrq_irqrestore() replaced with spin_unlock_irqrestore() for simplicity/clarity): CPU0 CPU1 dma_rx_complete() serial8250_handle_irq() spin_lock_irqsave(&port->lock) handle_rx_dma() serial8250_rx_dma_flush() __dma_rx_complete() dma->rx_running = 0 // Complete DMA Rx spin_unlock_irqrestore(&port->lock) serial8250_handle_irq() spin_lock_irqsave(&port->lock) handle_rx_dma() serial8250_rx_dma() dma->rx_running = 1 // Setup a new DMA Rx spin_unlock_irqrestore(&port->lock) spin_lock_irqsave(&port->lock) // sees dma->rx_running = 1 __dma_rx_complete() dma->rx_running = 0 // Incorrectly complete // running DMA Rx This race seems somewhat theoretical to occur for real but handle it correctly regardless. Check what is the DMA status before complething anything in __dma_rx_complete(). Reported-by: Gilles BULOZ <gilles.buloz@kontron.com> Tested-by: Gilles BULOZ <gilles.buloz@kontron.com> Fixes: 9ee4b83e51f7 ("serial: 8250: Add support for dmaengine") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230130114841.25749-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-31serial: 8250_dma: Fix DMA Rx completion raceIlpo Järvinen
__dma_rx_complete() is called from two places: - Through the DMA completion callback dma_rx_complete() - From serial8250_rx_dma_flush() after IIR_RLSI or IIR_RX_TIMEOUT The former does not hold port's lock during __dma_rx_complete() which allows these two to race and potentially insert the same data twice. Extend port's lock coverage in dma_rx_complete() to prevent the race and check if the DMA Rx is still pending completion before calling into __dma_rx_complete(). Reported-by: Gilles BULOZ <gilles.buloz@kontron.com> Tested-by: Gilles BULOZ <gilles.buloz@kontron.com> Fixes: 9ee4b83e51f7 ("serial: 8250: Add support for dmaengine") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230130114841.25749-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-31serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handlerMarek Vasut
Requesting an interrupt with IRQF_ONESHOT will run the primary handler in the hard-IRQ context even in the force-threaded mode. The force-threaded mode is used by PREEMPT_RT in order to avoid acquiring sleeping locks (spinlock_t) in hard-IRQ context. This combination makes it impossible and leads to "sleeping while atomic" warnings. Use one interrupt handler for both handlers (primary and secondary) and drop the IRQF_ONESHOT flag which is not needed. Fixes: e359b4411c283 ("serial: stm32: fix threaded interrupt handling") Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Valentin Caron <valentin.caron@foss.st.com> # V3 Signed-off-by: Marek Vasut <marex@denx.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230120160332.57930-1-marex@denx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-31Merge tag 'iio-fixes-for-6.2a' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: "1st set of IIO fixes for the 6.2 cycle. The usual mixed bag - with a bunch of issues found by Carlos Song in the fxos8700 IMU driver dominating. hid-accel,gyro - Fix wrong returned value when read succeeds. marvell,berlin-adc - Missing of_node_put() in an error path. nxp,fxos8700 (freescale) - Wrong channel type match. - Swapped channel read back. - Incomplete channel read back (not enough bytes). - Missing shift of acceleration data. - Range selection didn't work (datasheet bug) - Wrong ODR mode read back due to wrong field offset. - Drop unused, but wrong define. - Fix issue with magnetometer scale an units. nxp,imx8qxp - Fix an irq flood due to not reading data early enough. st,lsm6dsx - Add CONFIG_IIO_TRIGGERED_BUFFER select. st,stm32-adc - Fix missing MODULE_DEVICE_TABLE() needed for module aliases. ti,twl6030 - Fix missing enable of some channels. - Fix a typo in previous patch that meant one channel still wasn't enabled. xilinx,xadc - Carrying on incorrectly after allocation error." * tag 'iio-fixes-for-6.2a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: imu: fxos8700: fix MAGN sensor scale and unit iio: imu: fxos8700: remove definition FXOS8700_CTRL_ODR_MIN iio: imu: fxos8700: fix failed initialization ODR mode assignment iio: imu: fxos8700: fix incorrect ODR mode readback iio: light: cm32181: Fix PM support on system with 2 I2C resources iio: hid: fix the retval in gyro_3d_capture_sample iio: hid: fix the retval in accel_3d_capture_sample iio: imu: st_lsm6dsx: fix build when CONFIG_IIO_TRIGGERED_BUFFER=m iio:adc:twl6030: Enable measurement of VAC iio: imu: fxos8700: fix ACCEL measurement range selection iio: imu: fxos8700: fix IMU data bits returned to user space iio: imu: fxos8700: fix incomplete ACCEL and MAGN channels readback iio: imu: fxos8700: fix swapped ACCEL and MAGN channels readback iio: imu: fxos8700: fix map label of channel type to MAGN sensor iio:adc:twl6030: Enable measurements of VUSB, VBAT and others iio: imx8qxp-adc: fix irq flood when call imx8qxp_adc_read_raw() iio: adc: xilinx-ams: fix devm_krealloc() return value check iio: adc: berlin2-adc: Add missing of_node_put() in error path iio: adc: stm32-dfsdm: fill module aliases
2023-01-31net: sched: sch: Bounds check priorityKees Cook
Nothing was explicitly bounds checking the priority index used to access clpriop[]. WARN and bail out early if it's pathological. Seen with GCC 13: ../net/sched/sch_htb.c: In function 'htb_activate_prios': ../net/sched/sch_htb.c:437:44: warning: array subscript [0, 31] is outside array bounds of 'struct htb_prio[8]' [-Warray-bounds=] 437 | if (p->inner.clprio[prio].feed.rb_node) | ~~~~~~~~~~~~~~~^~~~~~ ../net/sched/sch_htb.c:131:41: note: while referencing 'clprio' 131 | struct htb_prio clprio[TC_HTB_NUMPRIO]; | ^~~~~~ Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Cong Wang <cong.wang@bytedance.com> Link: https://lore.kernel.org/r/20230127224036.never.561-kees@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-31net: ethernet: mtk_eth_soc: Avoid truncating allocationKees Cook
There doesn't appear to be a reason to truncate the allocation used for flow_info, so do a full allocation and remove the unused empty struct. GCC does not like having a reference to an object that has been partially allocated, as bounds checking may become impossible when such an object is passed to other code. Seen with GCC 13: ../drivers/net/ethernet/mediatek/mtk_ppe.c: In function 'mtk_foe_entry_commit_subflow': ../drivers/net/ethernet/mediatek/mtk_ppe.c:623:18: warning: array subscript 'struct mtk_flow_entry[0]' is partly outside array bounds of 'unsigned char[48]' [-Warray-bounds=] 623 | flow_info->l2_data.base_flow = entry; | ^~ Cc: Felix Fietkau <nbd@nbd.name> Cc: John Crispin <john@phrozen.org> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Mark Lee <Mark-MC.Lee@mediatek.com> Cc: Lorenzo Bianconi <lorenzo@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230127223853.never.014-kees@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-31kbuild: modinst: Fix build error when CONFIG_MODULE_SIG_KEY is a PKCS#11 URIJan Luebbe
When CONFIG_MODULE_SIG_KEY is PKCS#11 URI (pkcs11:*), signing of modules fails: scripts/sign-file sha256 /.../linux/pkcs11:token=foo;object=bar;pin-value=1111 certs/signing_key.x509 /.../kernel/crypto/tcrypt.ko Usage: scripts/sign-file [-dp] <hash algo> <key> <x509> <module> [<dest>] scripts/sign-file -s <raw sig> <hash algo> <x509> <module> [<dest>] First, we need to avoid adding the $(srctree)/ prefix to the URL. Second, since the kconfig string values no longer include quotes, we need to add them again when passing a PKCS#11 URI to sign-file. This avoids splitting by the shell if the URI contains semicolons. Fixes: 4db9c2e3d055 ("kbuild: stop using config_filename in scripts/Makefile.modsign") Fixes: 129ab0d2d9f3 ("kbuild: do not quote string values in include/config/auto.conf") Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-01-31certs: Fix build error when PKCS#11 URI contains semicolonJan Luebbe
When CONFIG_MODULE_SIG_KEY is PKCS#11 URI (pkcs11:*) and contains a semicolon, signing_key.x509 fails to build: certs/extract-cert pkcs11:token=foo;object=bar;pin-value=1111 certs/signing_key.x509 Usage: extract-cert <source> <dest> Add quotes to the extract-cert argument to avoid splitting by the shell. This approach was suggested by Masahiro Yamada <masahiroy@kernel.org>. Fixes: 129ab0d2d9f3 ("kbuild: do not quote string values in include/config/auto.conf") Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-01-31ALSA: doc: Fix PCM interface section typosMiquel Raynal
Fix two mistakes in the PCM interface section: 1/ Members of the snd_pcm_hardware structure are channels_{min,max} and not channel_{min,max} (mind the 's'). 2/ Another sentence is incomplete as the reference to one structure member (period_bytes_max) is missing. There is no relevant 'Fixes:' tag to apply as both typos predate the Git era. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20230130162924.119389-1-miquel.raynal@bootlin.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-01-31ALSA: firewire-motu: fix unreleased lock warning in hwdep deviceTakashi Sakamoto
Smatch static analysis tool detects that acquired lock is not released in hwdep device when condition branch is passed due to no event. It is unlikely to occur, while fulfilling is preferable for better coding. Reported-by: Dan Carpenter <error27@gmail.com> Fixes: 634ec0b2906e ("ALSA: firewire-motu: notify event for parameter change in register DSP model") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20230130141540.102854-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-01-31ALSA: firewire-lib: fix uninitialized local variableTakashi Sakamoto
The function local variable, curr_cycle_time is declared without initialization. When tracepoints event is not probed, it looks to be used as is. This commit fixes it. Fortunately, the value of local variable is not used unless the event is probed, thus this commit is for better coding. Reported-by: Dan Carpenter <error27@gmail.com> Fixes: fef4e61b0b76 ("ALSA: firewire-lib: extend tracepoints event including CYCLE_TIME of 1394 OHCI") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20230130141532.102838-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-01-30Merge tag 'ieee802154-for-net-2023-01-30' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== ieee802154 for net 2023-01-30 Only one fix this time around. Miquel Raynal fixed a potential double free spotted by Dan Carpenter. * tag 'ieee802154-for-net-2023-01-30' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan: mac802154: Fix possible double free upon parsing error ==================== Link: https://lore.kernel.org/r/20230130095646.301448-1-stefan@datenfreihafen.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-30net/tls: tls_is_tx_ready() checked list_entryPietro Borrello
tls_is_tx_ready() checks that list_first_entry() does not return NULL. This condition can never happen. For empty lists, list_first_entry() returns the list_entry() of the head, which is a type confusion. Use list_first_entry_or_null() which returns NULL in case of empty lists. Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance") Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it> Link: https://lore.kernel.org/r/20230128-list-entry-null-check-tls-v1-1-525bbfe6f0d0@diag.uniroma1.it Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-30Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-01-27 (ice) This series contains updates to ice driver only. Dave prevents modifying channels when RDMA is active as this will break RDMA traffic. Michal fixes a broken URL. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix broken link in ice NAPI doc ice: Prevent set_channel from changing queues while RDMA active ==================== Link: https://lore.kernel.org/r/20230127225333.1534783-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-31powerpc/imc-pmu: Revert nest_init_lock to being a mutexMichael Ellerman
The recent commit 76d588dddc45 ("powerpc/imc-pmu: Fix use of mutex in IRQs disabled section") fixed warnings (and possible deadlocks) in the IMC PMU driver by converting the locking to use spinlocks. It also converted the init-time nest_init_lock to a spinlock, even though it's not used at runtime in IRQ disabled sections or while holding other spinlocks. This leads to warnings such as: BUG: sleeping function called from invalid context at include/linux/percpu-rwsem.h:49 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0 preempt_count: 1, expected: 0 CPU: 7 PID: 1 Comm: swapper/0 Not tainted 6.2.0-rc2-14719-gf12cd06109f4-dirty #1 Hardware name: Mambo,Simulated-System POWER9 0x4e1203 opal:v6.6.6 PowerNV Call Trace: dump_stack_lvl+0x74/0xa8 (unreliable) __might_resched+0x178/0x1a0 __cpuhp_setup_state+0x64/0x1e0 init_imc_pmu+0xe48/0x1250 opal_imc_counters_probe+0x30c/0x6a0 platform_probe+0x78/0x110 really_probe+0x104/0x420 __driver_probe_device+0xb0/0x170 driver_probe_device+0x58/0x180 __driver_attach+0xd8/0x250 bus_for_each_dev+0xb4/0x140 driver_attach+0x34/0x50 bus_add_driver+0x1e8/0x2d0 driver_register+0xb4/0x1c0 __platform_driver_register+0x38/0x50 opal_imc_driver_init+0x2c/0x40 do_one_initcall+0x80/0x360 kernel_init_freeable+0x310/0x3b8 kernel_init+0x30/0x1a0 ret_from_kernel_thread+0x5c/0x64 Fix it by converting nest_init_lock back to a mutex, so that we can call sleeping functions while holding it. There is no interaction between nest_init_lock and the runtime spinlocks used by the actual PMU routines. Fixes: 76d588dddc45 ("powerpc/imc-pmu: Fix use of mutex in IRQs disabled section") Tested-by: Kajol Jain<kjain@linux.ibm.com> Reviewed-by: Kajol Jain<kjain@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230130014401.540543-1-mpe@ellerman.id.au
2023-01-30drm/nouveau/acr/gm20b: regression fixesBen Skeggs
Missed some Tegra-specific quirks when reworking ACR to support Ampere. Fixes: 2541626cfb79 ("drm/nouveau/acr: use common falcon HS FW code for ACR FWs") Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Tested-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130223715.1831509-3-bskeggs@redhat.com
2023-01-30drm/nouveau/fb/tu102-: fix register used to determine scrub statusBen Skeggs
Turing apparently needs to use the same register we use on Ampere. Not executing the scrubber ucode when required would result in large areas of VRAM being inaccessible to the driver. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130223715.1831509-2-bskeggs@redhat.com
2023-01-30drm/nouveau/devinit/tu102-: wait for GFW_BOOT_PROGRESS == COMPLETEDBen Skeggs
Starting from Turing, the driver is no longer responsible for initiating DEVINIT when required as the GPU started loading a FW image from ROM and executing DEVINIT itself after power-on. However - we apparently still need to wait for it to complete. This should correct some issues with runpm on some systems, where we get control of the HW before it's been fully reinitialised after resume from suspend. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130223715.1831509-1-bskeggs@redhat.com
2023-01-30pinctrl: aspeed: Revert "Force to disable the function's signal"Joel Stanley
This reverts commit cf517fef601b9dde151f0afc27164d13bf1fd907. The commit cf517fef601b ("pinctrl: aspeed: Force to disable the function's signal") exposed a problem with fetching the regmap for reading the GFX register. The Romulus machine the device tree contains a gpio hog for GPIO S7. With the patch applied: Muxing pin 151 for GPIO Disabling signal VPOB9 for VPO aspeed-g5-pinctrl 1e6e2080.pinctrl: Failed to acquire regmap for IP block 1 aspeed-g5-pinctrl 1e6e2080.pinctrl: request() failed for pin 151 The code path is aspeed-gpio -> pinmux-g5 -> regmap -> clk, and the of_clock code returns an error as it doesn't have a valid struct clk_hw pointer. The regmap call happens because pinmux wants to check the GFX node (IP block 1) to query bits there. For reference, before the offending patch: Muxing pin 151 for GPIO Disabling signal VPOB9 for VPO Want SCU8C[0x00000080]=0x1, got 0x0 from 0x00000000 Disabling signal VPOB9 for VPOOFF1 Want SCU8C[0x00000080]=0x1, got 0x0 from 0x00000000 Disabling signal VPOB9 for VPOOFF2 Want SCU8C[0x00000080]=0x1, got 0x0 from 0x00000000 Enabling signal GPIOS7 for GPIOS7 Muxed pin 151 as GPIOS7 gpio-943 (seq_cont): hogged as output/low We can't skip the clock check to allow pinmux to proceed, because the write to disable VPOB9 will try to set a bit in the GFX register space which will not stick when the IP is in reset. However, we do not want to enable the IP just so pinmux can do a disable-enable dance for the pin. For now, revert the offending patch while a correct solution is found. Fixes: cf517fef601b ("pinctrl: aspeed: Force to disable the function's signal") Link: https://github.com/openbmc/linux/issues/218 Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20230130220845.917985-1-joel@jms.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-01-30kunit: fix bug in KUNIT_EXPECT_MEMEQRae Moar
In KUNIT_EXPECT_MEMEQ and KUNIT_EXPECT_MEMNEQ, add check if one of the inputs is NULL and fail if this is the case. Currently, the kernel crashes if one of the inputs is NULL. Instead, fail the test and add an appropriate error message. Fixes: b8a926bea8b1 ("kunit: Introduce KUNIT_EXPECT_MEMEQ and KUNIT_EXPECT_MEMNEQ macros") This was found by the kernel test robot: https://lore.kernel.org/all/202212191448.D6EDPdOh-lkp@intel.com/ Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Rae Moar <rmoar@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-01-30ASoC: topology: Fixes and cleanupsMark Brown
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>: Following is series of fixes and cleanups for core topology code. Few patches fixing various problems all around and few fixing function names.
2023-01-30drm/i915/adlp: Fix typo for reference clockChaitanya Kumar Borah
Fix typo for reference clock from 24400 to 24000. Bspec: 55409 Fixes: 626426ff9ce4 ("drm/i915/adl_p: Add cdclk support for ADL-P") Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230112094131.550252-1-chaitanya.kumar.borah@intel.com (cherry picked from commit 2b6f7e39ccae065abfbe3b6e562ec95ccad09f1e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2023-01-30drm/i915: Fix potential bit_17 double-freeRob Clark
A userspace with multiple threads racing I915_GEM_SET_TILING to set the tiling to I915_TILING_NONE could trigger a double free of the bit_17 bitmask. (Or conversely leak memory on the transition to tiled.) Move allocation/free'ing of the bitmask within the section protected by the obj lock. Signed-off-by: Rob Clark <robdclark@chromium.org> Fixes: 2850748ef876 ("drm/i915: Pull i915_vma_pin under the vm->mutex") Cc: <stable@vger.kernel.org> # v5.5+ [tursulin: Correct fixes tag and added cc stable.] Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230127200550.3531984-1-robdclark@gmail.com (cherry picked from commit 10e0cbaaf1104f449d695c80bcacf930dcd3c42e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2023-01-30drm/i915: Fix up locking around dumping requests listsJohn Harrison
The debugfs dump of requests was confused about what state requires the execlist lock versus the GuC lock. There was also a bunch of duplicated messy code between it and the error capture code. So refactor the hung request search into a re-usable function. And reduce the span of the execlist state lock to only the execlist specific code paths. In order to do that, also move the report of hold count (which is an execlist only concept) from the top level dump function to the lower level execlist specific function. Also, move the execlist specific code into the execlist source file. v2: Rename some functions and move to more appropriate files (Daniele). v3: Rename new execlist dump function (Daniele) Fixes: dc0dad365c5e ("drm/i915/guc: Fix for error capture after full GPU reset with GuC") Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Cc: Michael Cheng <michael.cheng@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Bruce Chang <yu.bruce.chang@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230127002842.3169194-4-John.C.Harrison@Intel.com (cherry picked from commit a4be3dca53172d9d2091e4b474fb795c81ed3d6c) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2023-01-30drm/i915: Fix request ref counting during error capture & debugfs dumpJohn Harrison
When GuC support was added to error capture, the reference counting around the request object was broken. Fix it up. The context based search manages the spinlocking around the search internally. So it needs to grab the reference count internally as well. The execlist only request based search relies on external locking, so it needs an external reference count but within the spinlock not outside it. The only other caller of the context based search is the code for dumping engine state to debugfs. That code wasn't previously getting an explicit reference at all as it does everything while holding the execlist specific spinlock. So, that needs updaing as well as that spinlock doesn't help when using GuC submission. Rather than trying to conditionally get/put depending on submission model, just change it to always do the get/put. v2: Explicitly document adding an extra blank line in some dense code (Andy Shevchenko). Fix multiple potential null pointer derefs in case of no request found (some spotted by Tvrtko, but there was more!). Also fix a leaked request in case of !started and another in __guc_reset_context now that intel_context_find_active_request is actually reference counting the returned request. v3: Add a _get suffix to intel_context_find_active_request now that it grabs a reference (Daniele). v4: Split the intel_guc_find_hung_context change to a separate patch and rename intel_context_find_active_request_get to intel_context_get_active_request (Tvrtko). v5: s/locking/reference counting/ in commit message (Tvrtko) Fixes: dc0dad365c5e ("drm/i915/guc: Fix for error capture after full GPU reset with GuC") Fixes: 573ba126aef3 ("drm/i915/guc: Capture error state on context reset") Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Cc: Michael Cheng <michael.cheng@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: Bruce Chang <yu.bruce.chang@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230127002842.3169194-3-John.C.Harrison@Intel.com (cherry picked from commit 3700e353781e27f1bc7222f51f2cc36cbeb9b4ec) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2023-01-30drm/i915/guc: Fix locking when searching for a hung requestJohn Harrison
intel_guc_find_hung_context() was not acquiring the correct spinlock before searching the request list. So fix that up. While at it, add some extra whitespace padding for readability. Fixes: dc0dad365c5e ("drm/i915/guc: Fix for error capture after full GPU reset with GuC") Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Cc: Michael Cheng <michael.cheng@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com> Cc: Chris Wilson <chris.p.wilson@intel.com> Cc: Bruce Chang <yu.bruce.chang@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230127002842.3169194-2-John.C.Harrison@Intel.com (cherry picked from commit d1c3717501bcf56536e8b8c1bdaf5cd5357f6bb2) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2023-01-30drm/i915: Avoid potential vm use-after-freeRob Clark
Adding the vm to the vm_xa table makes it visible to userspace, which could try to race with us to close the vm. So we need to take our extra reference before putting it in the table. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Fixes: 9ec8795e7d91 ("drm/i915: Drop __rcu from gem_context->vm") Cc: <stable@vger.kernel.org> # v5.16+ Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230119173321.2825472-1-robdclark@gmail.com (cherry picked from commit 99343c46d4e2b34c285d3d5f68ff04274c2f9fb4) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2023-01-30ASoC: dt-bindings: audio-graph-port related updateMark Brown
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Audio-Graph-Card and Simple-Audio-Card are similar Card and are sharing same utils. Thus we can also sharing same schema. This patch-set fixup some Renesas's "make dtbs_check".
2023-01-30Merge tag 'fscache-fixes-20230130' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull fscache fixes from David Howells: "Fix two problems in fscache volume handling: - wake_up_bit() is incorrectly paired with wait_var_event(). The latter selects the waitqueue to use differently. - Missing barriers ordering between state bit and task state" * tag 'fscache-fixes-20230130' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: fscache: Use clear_and_wake_up_bit() in fscache_create_volume_work() fscache: Use wait_on_bit() to wait for the freeing of relinquished volume
2023-01-30ASoC: dt-bindings: Add schema for "awinic,aw88395"Weidong Wang
Add a DT schema for describing Awinic AW88395 audio amplifiers. They are controlled using I2C. Signed-off-by: Weidong Wang <wangweidong.a@awinic.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230113055301.189541-6-wangweidong.a@awinic.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30ASoC: codecs: Aw88395 chip register file, data type file and Kconfig MakefileWeidong Wang
The Awinic AW88395 is an I2S/TDM input, high efficiency digital Smart K audio amplifier with an integrated 10.25V smart boost convert Signed-off-by: Nick Li <liweilei@awinic.com> Signed-off-by: Bruce zhao <zhaolei@awinic.com> Signed-off-by: Weidong Wang <wangweidong.a@awinic.com> Link: https://lore.kernel.org/r/20230113055301.189541-5-wangweidong.a@awinic.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30ASoC: codecs: Aw88395 function for ALSA Audio DriverWeidong Wang
The Awinic AW88395 is an I2S/TDM input, high efficiency digital Smart K audio amplifier with an integrated 10.25V smart boost convert Signed-off-by: Nick Li <liweilei@awinic.com> Signed-off-by: Bruce zhao <zhaolei@awinic.com> Signed-off-by: Ben Yi <yijiangtao@awinic.com> Signed-off-by: Weidong Wang <wangweidong.a@awinic.com> Link: https://lore.kernel.org/r/20230113055301.189541-4-wangweidong.a@awinic.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30ASoC: codecs: ACF bin parsing and check library file for aw88395Weidong Wang
The Awinic AW88395 is an I2S/TDM input, high efficiency digital Smart K audio amplifier with an integrated 10.25V smart boost convert Signed-off-by: Nick Li <liweilei@awinic.com> Signed-off-by: Bruce zhao <zhaolei@awinic.com> Signed-off-by: Weidong Wang <wangweidong.a@awinic.com> Link: https://lore.kernel.org/r/20230113055301.189541-3-wangweidong.a@awinic.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30ASoC: codecs: Add i2c and codec registration for aw88395 and their ↵Weidong Wang
associated operation functions The Awinic AW88395 is an I2S/TDM input, high efficiency digital Smart K audio amplifier with an integrated 10.25V smart boost convert Signed-off-by: Nick Li <liweilei@awinic.com> Signed-off-by: Bruce zhao <zhaolei@awinic.com> Signed-off-by: Weidong Wang <wangweidong.a@awinic.com> Link: https://lore.kernel.org/r/20230113055301.189541-2-wangweidong.a@awinic.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30MAINTAINERS: add the Renesas IDT821034 codec entryHerve Codina
After contributing the driver, add myself as the maintainer for the Renesas IDT821034 codec. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Link: https://lore.kernel.org/r/20230126085137.375814-4-herve.codina@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30ASoC: codecs: Add support for the Renesas IDT821034 codecHerve Codina
The Renesas IDT821034 codec is four channel PCM codec with on-chip filters and programmable gain setting. It also provides SLIC (Subscriber Line Interface Circuit) signals as GPIOs. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Link: https://lore.kernel.org/r/20230126085137.375814-3-herve.codina@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30ASoC: Add Renesas IDT821034 codec bindingsHerve Codina
The Renesas IDT821034 codec is a quad PCM codec with programmable gain. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230126085137.375814-2-herve.codina@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30ASoC: mchp-spdifrx: document data structuresClaudiu Beznea
Document data structures used by mchp-spdifrx driver. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230130120647.638049-9-claudiu.beznea@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30ASoC: mchp-spdifrx: add runtime pm supportClaudiu Beznea
Add runtime PM support for Microchip SPDIFRX driver. On runtime suspend the clocks are disabled and regmap is set in caching mode. On runtime resume the clocks are enabled and regmap is synced with the device. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230130120647.638049-8-claudiu.beznea@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30ASoC: mchp-spdifrx: remove struct mchp_spdifrx_dev::fmt memberClaudiu Beznea
Remove member fmt of struct mchp_spdifrx_dev as it is not used anywhere. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230130120647.638049-7-claudiu.beznea@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30ASoC: mchp-spdifrx: use unsigned long to store clk_get_rate() valueClaudiu Beznea
clk_get_rate() returns an unsigned long. Use a variable of type unsigned long to store it. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230130120647.638049-6-claudiu.beznea@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30ASoC: mchp-spdifrx: disable all interrupts in mchp_spdifrx_dai_remove()Claudiu Beznea
CSC interrupts which might be used in controls are on bits 8 and 9 of SPDIFRX_IDR register. Thus disable all the interrupts that are exported by driver. Fixes: ef265c55c1ac ("ASoC: mchp-spdifrx: add driver for SPDIF RX") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230130120647.638049-5-claudiu.beznea@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30ASoC: mchp-spdifrx: fix controls that works with completion mechanismClaudiu Beznea
Channel status get and channel subcode get controls relies on data returned by controls when certain IRQs are raised. To achieve that completions are used b/w controls and interrupt service routine. The concurrent accesses to these controls are protected by struct snd_card::controls_rwsem. Issues identified: - reinit_completion() may be called while waiting for completion which should be avoided - in case of multiple threads waiting, the complete() call in interrupt will signal only one waiting thread per interrupt which may lead to timeout for the others - in case of channel status get as the CSC interrupt is not refcounted ISR may disable interrupt for threads that were just enabled it. To solve these the access to controls were protected by a mutex. Along with this there is no need for spinlock to protect the software cache reads/updates b/w controls and ISR as the update is happening only when requested from control, and only one reader can reach the control. Fixes: ef265c55c1ac ("ASoC: mchp-spdifrx: add driver for SPDIF RX") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230130120647.638049-4-claudiu.beznea@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30ASoC: mchp-spdifrx: fix return value in case completion times outClaudiu Beznea
wait_for_completion_interruptible_timeout() returns 0 in case of timeout. Check this into account when returning from function. Fixes: ef265c55c1ac ("ASoC: mchp-spdifrx: add driver for SPDIF RX") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230130120647.638049-3-claudiu.beznea@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-23 18:22:23 +0000