summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-16HID: google: add moonball USB idChen-Tsung Hsieh
Add 1 additional hammer-like device. Signed-off-by: Chen-Tsung Hsieh <chentsung@chromium.org> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-03-16drm/i915: Handle all MCR rangesMatt Roper
The bspec documents multiple MCR ranges; make sure they're all captured by the driver. Bspec: 13991, 52079 Fixes: 592a7c5e082e ("drm/i915: Extend non readable mcr range") Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200311162300.1838847-2-matthew.d.roper@intel.com Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> (cherry picked from commit 415d1269975d3fc21c13a6ae8de7b5fe0e6febb1) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-03-16Revert "drm/i915/tgl: Add extra hdc flush workaround"Caz Yokoyama
This reverts commit 36a6b5d964d995b536b1925ec42052ee40ba92c4. The commit takes care Wa_1604544889 which was fixed on a0 stepping based on a0 replan. So no SW workaround is required on any stepping now. Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Caz Yokoyama <caz.yokoyama@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Fixes: 36a6b5d964d9 ("drm/i915/tgl: Add extra hdc flush workaround") Link: https://patchwork.freedesktop.org/patch/msgid/1c751032ce79c80c5485cae315f1a9904ce07cac.1583359940.git.caz.yokoyama@intel.com (cherry picked from commit 175c4d9b3b9a60b4ea0b8cd034011808c6a03b05) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-03-16drm/i915/execlists: Track active elements during dequeueChris Wilson
Record the initial active element we use when building the next ELSP submission, so that we can compare against it latter to see if there's no change. Fixes: 44d0a9c05bc0 ("drm/i915/execlists: Skip redundant resubmission") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200311092624.10012-2-chris@chris-wilson.co.uk (cherry picked from commit 60ef5b7ac6a131f09d287a5f156c878c2c926a30) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-03-16vti6: Fix memory leak of skb if input policy check failsTorsten Hilbrich
The vti6_rcv function performs some tests on the retrieved tunnel including checking the IP protocol, the XFRM input policy, the source and destination address. In all but one places the skb is released in the error case. When the input policy check fails the network packet is leaked. Using the same goto-label discard in this case to fix this problem. Fixes: ed1efb2aefbb ("ipv6: Add support for IPsec virtual tunnel interfaces") Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-03-16net: sched: set the hw_stats_type in pedit loopJiri Pirko
For a single pedit action, multiple offload entries may be used. Set the hw_stats_type to all of them. Fixes: 44f865801741 ("sched: act: allow user to specify type of HW stats for a filter") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16Merge branch 'net-stmmac-Use-readl_poll_timeout-to-simplify-the-code'David S. Miller
Dejin Zheng says: ==================== net: stmmac: Use readl_poll_timeout() to simplify the code This patch sets just for replace the open-coded loop to the readl_poll_timeout() helper macro for simplify the code in stmmac driver. v2 -> v3: - return whatever error code by readl_poll_timeout() returned. v1 -> v2: - no changed. I am a newbie and sent this patch a month ago (February 6th). So far, I have not received any comments or suggestion. I think it may be lost somewhere in the world, so resend it. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16net: stmmac: use readl_poll_timeout() function in dwmac4_dma_reset()Dejin Zheng
The dwmac4_dma_reset() function use an open coded of readl_poll_timeout(). Replace the open coded handling with the proper function. Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16net: stmmac: use readl_poll_timeout() function in init_systime()Dejin Zheng
The init_systime() function use an open coded of readl_poll_timeout(). Replace the open coded handling with the proper function. Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16ALSA: seq: oss: Fix running status after receiving sysexTakashi Iwai
This is a similar bug like the previous case for virmidi: the invalid running status is kept after receiving a sysex message. Again the fix is to clear the running status after handling the sysex. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/3b4a4e0f232b7afbaf0a843f63d0e538e3029bfd.camel@domdv.de Link: https://lore.kernel.org/r/20200316090506.23966-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-03-16ALSA: seq: virmidi: Fix running status after receiving sysexTakashi Iwai
The virmidi driver handles sysex event exceptionally in a short-cut snd_seq_dump_var_event() call, but this missed the reset of the running status. As a result, it may lead to an incomplete command right after the sysex when an event with the same running status was queued. Fix it by clearing the running status properly via alling snd_midi_event_reset_decode() for that code path. Reported-by: Andreas Steinmetz <ast@domdv.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/3b4a4e0f232b7afbaf0a843f63d0e538e3029bfd.camel@domdv.de Link: https://lore.kernel.org/r/20200316090506.23966-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-03-16Merge branch 'ethtool-fail-with-error-if-request-has-unknown-flags'David S. Miller
Michal Kubecek says: ==================== ethtool: fail with error if request has unknown flags Jakub Kicinski pointed out that if unrecognized flags are set in netlink header request, kernel shoud fail with an error rather than silently ignore them so that we have more freedom in future flags semantics. To help userspace with handling such errors, inform the client which flags are supported by kernel. For that purpose, we need to allow passing cookies as part of extack also in case of error (they can be only passed on success now). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16ethtool: reject unrecognized request flagsMichal Kubecek
As pointed out by Jakub Kicinski, we ethtool netlink code should respond with an error if request head has flags set which are not recognized by kernel, either as a mistake or because it expects functionality introduced in later kernel versions. To avoid unnecessary roundtrips, use extack cookie to provide the information about supported request flags. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16netlink: add nl_set_extack_cookie_u32()Michal Kubecek
Similar to existing nl_set_extack_cookie_u64(), add new helper nl_set_extack_cookie_u32() which sets extack cookie to a u32 value. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16netlink: allow extack cookie also for error messagesMichal Kubecek
Commit ba0dc5f6e0ba ("netlink: allow sending extended ACK with cookie on success") introduced a cookie which can be sent to userspace as part of extended ack message in the form of NLMSGERR_ATTR_COOKIE attribute. Currently the cookie is ignored if error code is non-zero but there is no technical reason for such limitation and it can be useful to provide machine parseable information as part of an error message. Include NLMSGERR_ATTR_COOKIE whenever the cookie has been set, regardless of error code. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16chcr: remove set but not used variable 'status'YueHaibing
drivers/crypto/chelsio/chcr_ktls.c: In function chcr_ktls_cpl_set_tcb_rpl: drivers/crypto/chelsio/chcr_ktls.c:662:11: warning: variable status set but not used [-Wunused-but-set-variable] commit 8a30923e1598 ("cxgb4/chcr: Save tx keys and handle HW response") involved this unused variable, remove it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16net_sched: cls_route: remove the right filter from hashtableCong Wang
route4_change() allocates a new filter and copies values from the old one. After the new filter is inserted into the hash table, the old filter should be removed and freed, as the final step of the update. However, the current code mistakenly removes the new one. This looks apparently wrong to me, and it causes double "free" and use-after-free too, as reported by syzbot. Reported-and-tested-by: syzbot+f9b32aaacd60305d9687@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+2f8c233f131943d6056d@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+9c2df9fd5e9445b74e01@syzkaller.appspotmail.com Fixes: 1109c00547fc ("net: sched: RCU cls_route") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16Merge branch 'hsr-fix-several-bugs-in-generic-netlink-callback'David S. Miller
Taehee Yoo says: ==================== hsr: fix several bugs in generic netlink callback This patchset is to fix several bugs they are related in generic netlink callback in hsr module. 1. The first patch is to add missing rcu_read_lock() in hsr_get_node_{list/status}(). The hsr_get_node_{list/status}() are not protected by RTNL because they are callback functions of generic netlink. But it calls __dev_get_by_index() without acquiring RTNL. So, it would use unsafe data. 2. The second patch is to avoid failure of hsr_get_node_list(). hsr_get_node_list() is a callback of generic netlink and it is used to get node information in userspace. But, if there are so many nodes, it fails because of buffer size. So, in this patch, restart routine is added. 3. The third patch is to set .netnsok flag to true. If .netnsok flag is false, non-init_net namespace is not allowed to operate generic netlink operations. So, currently, non-init_net namespace has no way to get node information because .netnsok is false in the current hsr code. Change log: v1->v2: - Preserve reverse christmas tree variable ordering in the second patch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16hsr: set .netnsok flagTaehee Yoo
The hsr module has been supporting the list and status command. (HSR_C_GET_NODE_LIST and HSR_C_GET_NODE_STATUS) These commands send node information to the user-space via generic netlink. But, in the non-init_net namespace, these commands are not allowed because .netnsok flag is false. So, there is no way to get node information in the non-init_net namespace. Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16hsr: add restart routine into hsr_get_node_list()Taehee Yoo
The hsr_get_node_list() is to send node addresses to the userspace. If there are so many nodes, it could fail because of buffer size. In order to avoid this failure, the restart routine is added. Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16hsr: use rcu_read_lock() in hsr_get_node_{list/status}()Taehee Yoo
hsr_get_node_{list/status}() are not under rtnl_lock() because they are callback functions of generic netlink. But they use __dev_get_by_index() without rtnl_lock(). So, it would use unsafe data. In order to fix it, rcu_read_lock() and dev_get_by_index_rcu() are used instead of __dev_get_by_index(). Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)Era Mayflower
Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16macsec: Support XPN frame handling - IEEE 802.1AEbwEra Mayflower
Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16Bluetooth: btusb: print Intel fw build version in power-on bootSukumar Ghorai
To determine the build version of Bluetooth firmware to ensure reported issue related to a particular release. This is very helpful for every fw downloaded to BT controller and issue reported from field test. Signed-off-by: Amit K Bag <amit.k.bag@intel.com> Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-16Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v5.7. Major changes: ath10k * support for getting btcoex settings from Device Tree * support QCA9377 SDIO device ath11k * add HE rate accounting * add thermal sensor and cooling devices
2020-03-16clk: imx8mp: Correct the enet_qos parent clockFugang Duan
enet_qos is for eqos tsn AXI bus clock whose clock source is from ccm_enet_axi_clk_root, and controlled by CCM_CCGR59(offset 0x43b0) and CCM_CCGR64(offset 0x4400), so correct enet_qos root clock's parent clock to sim_enet. Fixes: 9c140d992676 ("clk: imx: Add support for i.MX8MP clock driver") Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-16clk: imx8mp: Correct IMX8MP_CLK_HDMI_AXI clock parentAnson Huang
IMX8MP_CLK_HDMI_AXI should be from imx8mp_media_axi_sels instead of imx8mp_media_apb_sels, fix it. Fixes: 9c140d992676 ("clk: imx: Add support for i.MX8MP clock driver") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-15Merge branch 'net-dsa-improve-serdes-integration'David S. Miller
Russell King says: ==================== net: dsa: improve serdes integration Depends on "net: mii clause 37 helpers". Andrew Lunn mentioned that the Serdes PCS found in Marvell DSA switches does not automatically update the switch MACs with the link parameters. Currently, the DSA code implements a work-around for this. This series improves the Serdes integration, making use of the recent phylink changes to support split MAC/PCS setups. One noticable improvement for userspace is that ethtool can now report the link partner's advertisement. This repost has no changes compared to the previous posting; however, the regression Andrew had found which exists even without this patch set has now been fixed by Andrew and merged into the net-next tree. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-15net: dsa: mv88e6xxx: use PHY_DETECT in mac_link_up/mac_link_downRussell King
Use the status of the PHY_DETECT bit to determine whether we need to force the MAC settings in mac_link_up() and mac_link_down(). Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-15net: dsa: mv88e6xxx: remove port_link_state functionsRussell King
The port_link_state method is only used by mv88e6xxx_port_setup_mac(), which is now only called during port setup, rather than also being called via phylink's mac_config method. Remove this now unnecessary optimisation, which allows us to remove the port_link_state methods as well. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-15net: dsa: mv88e6xxx: combine port_set_speed and port_set_duplexRussell King
Setting the speed independently of duplex makes little sense; the two parameters result from negotiation or fixed setup, and may have inter- dependencies. Moreover, they are always controlled via the same register - having them split means we have to read-modify-write this register twice. Combine the two operations into a single port_set_speed_duplex() operation. Not only is this more efficient, it reduces the size of the code as well. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-15net: dsa: mv88e6xxx: fix Serdes link changesRussell King
phylink_mac_change() is supposed to be called with a 'false' argument if the link has gone down since it was last reported up; this is to ensure that link events along with renegotiation events are always correctly reported to userspace. Read the BMSR once when we have an interrupt, and report the link latched status to phylink via phylink_mac_change(). phylink will deal automatically with re-reading the link state once it has processed the link-down event. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-15net: dsa: mv88e6xxx: extend phylink to Serdes PHYsRussell King
Extend the mv88e6xxx phylink implementation down to Serdes PHYs, which handle the PCS layer of such links. - Implement phylink PCS link state reading, so that we can provide ethtool with the linkmodes and link speed in the expected manner. Note: this will only be called for in-band negotiation, which is only supported by the serdes interfaces. - Implement phylink PCS configuration, so that the in-band AN and advertisement can be configured. - Implement phylink PCS negotiation restart, so that the in-band AN can be restarted. - Implement phylink PCS link up, so that when operating out-of-band, the Serdes can be configured for the appropriate fixed speed mode. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-15net: dsa: mv88e6xxx: configure interface settings in mac_configRussell King
Only configure the interface settings in mac_config(), leaving the speed and duplex settings to mac_link_up to deal with. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-15net: dsa: mv88e6xxx: use BMCR definitions for serdes control registerRussell King
The SGMII/1000base-X serdes register set is a clause 22 register set offset at 0x2000 in the PHYXS device. Rather than inventing our own defintions, use those that already exist, and name the register MV88E6390_SGMII_BMCR. Also remove the unused MV88E6390_SGMII_STATUS definitions. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-15net: dsa: warn if phylink_mac_link_state returns errorRussell King
Issue a warning to the kernel log if phylink_mac_link_state() returns an error. This should not occur, but let's make it visible. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-15Merge branch 'net-mii-clause-37-helpers'David S. Miller
Russell King says: ==================== net: mii clause 37 helpers This is a re-post of two patches that are common to two series that I've sent in recent weeks; I'm re-posting them separately in the hope that they can be merged. No changes from either of the previous postings. These patches: 1. convert the existing (unused) mii_lpa_to_ethtool_lpa_x() function to a linkmode variant. 2. add a helper for clause 37 advertisements, supporting both the 1000baseX and defacto 2500baseX variants. Note that ethtool does not support half duplex for either of these, and we make no effort to do so. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-15net: mii: add linkmode_adv_to_mii_adv_x()Russell King
Add a helper to convert a linkmode advertisement to a clause 37 advertisement value for 1000base-x and 2500base-x. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-15net: mii: convert mii_lpa_to_ethtool_lpa_x() to linkmode variantRussell King
Add a LPA to linkmode decoder for 1000BASE-X protocols; this decoder only provides the modify semantics similar to other such decoders. This replaces the unused mii_lpa_to_ethtool_lpa_x() helper. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-15Merge branch 'net-Use-scnprintf-for-avoiding-potential-buffer-overflow'David S. Miller
Takashi Iwai says: ==================== net: Use scnprintf() for avoiding potential buffer overflow here is a respin of trivial patch series just to convert suspicious snprintf() usages with the more safer one, scnprintf(). v1->v2: Align the remaining lines to the open parenthesis Excluded i40e patch that was already queued ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-15net: netdevsim: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Cc: "David S . Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-15net: sfc: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Cc: "David S . Miller" <davem@davemloft.net> Cc: Edward Cree <ecree@solarflare.com> Cc: Martin Habets <mhabets@solarflare.com> Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com> Cc: netdev@vger.kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-15net: ionic: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Reviewed-by: Simon Horman <simon.horman@netronome.com> Acked-by: Shannon Nelson <snelson@pensando.io> Cc: "David S . Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: oss-drivers@netronome.com Cc: netdev@vger.kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-15net: nfp: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Reviewed-by: Simon Horman <simon.horman@netronome.com> Cc: "David S . Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: oss-drivers@netronome.com To: netdev@vger.kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-15net: mlx4: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Cc: "David S . Miller" <davem@davemloft.net> Cc: Tariq Toukan <tariqt@mellanox.com> To: netdev@vger.kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-15net: caif: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Cc: "David S . Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-15mlxsw: reg: Increase register field length to 31 bitsIdo Schimmel
The cited commit set a value of 2^31-1 in order to "disable" the shaper on a given a port. However, the length of the maximum shaper rate field was not updated from 28 bits to 31 bits, which means ports are still limited to ~268Gbps despite supporting speeds of 400Gbps. Fix this by increasing the field's length. Fixes: 92afbfedb77d ("mlxsw: reg: Increase MLXSW_REG_QEEC_MAS_DIS") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-15Linux 5.6-rc6v5.6-rc6Linus Torvalds
2020-03-15Merge tag 'irq-urgent-2020-03-15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Thomas Gleixner: "A single commit to handle an erratum in Cavium ThunderX to prevent access to GIC registers which are broken in the implementation" * tag 'irq-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3: Workaround Cavium erratum 38539 when reading GICD_TYPER2
2020-03-15Merge tag 'locking-urgent-2020-03-15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull futex fix from Thomas Gleixner: "Fix for yet another subtle futex issue. The futex code used ihold() to prevent inodes from vanishing, but ihold() does not guarantee inode persistence. Replace the inode pointer with a per boot, machine wide, unique inode identifier. The second commit fixes the breakage of the hash mechanism which causes a 100% performance regression" * tag 'locking-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Unbreak futex hashing futex: Fix inode life-time issue
generated by cgit (git 2.34.1) at 2025-09-16 22:41:40 +0000