| Age | Commit message (Collapse) | Author |
|---|
|
In preparation of factoring out PCI_STATUS error bit handling let drivers
use the same collection of error bits. To facilitate bisecting we do this
in a separate patch per affected driver. For the Marvell drivers we have
to add PCI_STATUS_SIG_TARGET_ABORT to the error bits.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Vladimir Oltean says:
====================
Allow unknown unicast traffic to CPU for Felix DSA
This is the continuation of the previous "[PATCH net-next] net: mscc:
ocelot: Workaround to allow traffic to CPU in standalone mode":
https://www.spinics.net/lists/netdev/msg631067.html
Following the feedback received from Allan Nielsen, the Ocelot and Felix
drivers were made to use the CPU port module in the same way (patch 1),
and Felix was made to additionally allow unknown unicast frames towards
the CPU port module (patch 2).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Compared to other DSA switches, in the Ocelot cores, the RX filtering is
a much more important concern.
Firstly, the primary use case for Ocelot is non-DSA, so there isn't any
secondary Ethernet MAC [the DSA master's one] to implicitly drop frames
having a DMAC we are not interested in. So the switch driver itself
needs to install FDB entries towards the CPU port module (PGID_CPU) for
the MAC address of each switch port, in each VLAN installed on the port.
Every address that is not whitelisted is implicitly dropped. This is in
order to achieve a behavior similar to N standalone net devices.
Secondly, even in the secondary use case of DSA, such as illustrated by
Felix with the NPI port mode, that secondary Ethernet MAC is present,
but its RX filter is bypassed. This is because the DSA tags themselves
are placed before Ethernet, so the DMAC that the switch ports see is
not seen by the DSA master too (since it's shifter to the right).
So RX filtering is pretty important. A good RX filter won't bother the
CPU in case the switch port receives a frame that it's not interested
in, and there exists no other line of defense.
Ocelot is pretty strict when it comes to RX filtering: non-IP multicast
and broadcast traffic is allowed to go to the CPU port module, but
unknown unicast isn't. This means that traffic reception for any other
MAC addresses than the ones configured on each switch port net device
won't work. This includes use cases such as macvlan or bridging with a
non-Ocelot (so-called "foreign") interface. But this seems to be fine
for the scenarios that the Linux system embedded inside an Ocelot switch
is intended for - it is simply not interested in unknown unicast
traffic, as explained in Allan Nielsen's presentation [0].
On the other hand, the Felix DSA switch is integrated in more
general-purpose Linux systems, so it can't afford to drop that sort of
traffic in hardware, even if it will end up doing so later, in software.
Actually, unknown unicast means more for Felix than it does for Ocelot.
Felix doesn't attempt to perform the whitelisting of switch port MAC
addresses towards PGID_CPU at all, mainly because it is too complicated
to be feasible: while the MAC addresses are unique in Ocelot, by default
in DSA all ports are equal and inherited from the DSA master. This adds
into account the question of reference counting MAC addresses (delayed
ocelot_mact_forget), not to mention reference counting for the VLAN IDs
that those MAC addresses are installed in. This reference counting
should be done in the DSA core, and the fact that it wasn't needed so
far is due to the fact that the other DSA switches don't have the DSA
tag placed before Ethernet, so the DSA master is able to whitelist the
MAC addresses in hardware.
So this means that even regular traffic termination on a Felix switch
port happens through flooding (because neither Felix nor Ocelot learn
source MAC addresses from CPU-injected frames).
So far we've explained that whitelisting towards PGID_CPU:
- helps to reduce the likelihood of spamming the CPU with frames it
won't process very far anyway
- is implemented in the ocelot driver
- is sufficient for the ocelot use cases
- is not feasible in DSA
- breaks use cases in DSA, in the current status (whitelisting enabled
but no MAC address whitelisted)
So the proposed patch allows unknown unicast frames to be sent to the
CPU port module. This is done for the Felix DSA driver only, as Ocelot
seems to be happy without it.
[0]: https://www.youtube.com/watch?v=B1HhxEcU7Jg
Suggested-by: Allan W. Nielsen <allan.nielsen@microchip.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Allan W. Nielsen <allan.nielsen@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ocelot has the concept of a CPU port. The CPU port is represented in the
forwarding and the queueing system, but it is not a physical device. The
CPU port can either be accessed via register-based injection/extraction
(which is the case of Ocelot), via Frame-DMA (similar to the first one),
or "connected" to a physical Ethernet port (called NPI in the datasheet)
which is the case of the Felix DSA switch.
In Ocelot the CPU port is at index 11.
In Felix the CPU port is at index 6.
The CPU bit is treated special in the forwarding, as it is never cleared
from the forwarding port mask (once added to it). Other than that, it is
treated the same as a normal front port.
Both Felix and Ocelot should use the CPU port in the same way. This
means that Felix should not use the NPI port directly when forwarding to
the CPU, but instead use the CPU port.
This patch is fixing this such that Felix will use port 6 as its CPU
port, and just use the NPI port to carry the traffic.
Therefore, eliminate the "ocelot->cpu" variable which was holding the
index of the NPI port for Felix, and the index of the CPU port module
for Ocelot, so the variable was actually configuring different things
for different drivers and causing at least part of the confusion.
Also remove the "ocelot->num_cpu_ports" variable, which is the result of
another confusion. The 2 CPU ports mentioned in the datasheet are
because there are two frame extraction channels (register based or DMA
based). This is of no relevance to the driver at the moment, and
invisible to the analyzer module.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Suggested-by: Allan W. Nielsen <allan.nielsen@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
KP Singh says:
====================
v3 -> v4:
* Fix a memory leak noticed by Daniel.
v2 -> v3:
* bpf_trampoline_update_progs -> bpf_trampoline_get_progs + const
qualification.
* Typos in commit messages.
* Added Andrii's Acks.
v1 -> v2:
* Adressed Andrii's feedback.
* Fixed a bug that Alexei noticed about nop generation.
* Rebase.
This was brought up in the KRSI v4 discussion and found to be useful
both for security and tracing programs.
https://lore.kernel.org/bpf/20200225193108.GB22391@chromium.org/
The modify_return programs are allowed for security hooks (with an
extra CAP_MAC_ADMIN check) and functions whitelisted for error
injection (ALLOW_ERROR_INJECTION).
The "security_" check is expected to be cleaned up with the KRSI patch
series.
Here is an example of how a fmod_ret program behaves:
int func_to_be_attached(int a, int b)
{ <--- do_fentry
do_fmod_ret:
<update ret by calling fmod_ret>
if (ret != 0)
goto do_fexit;
original_function:
<side_effects_happen_here>
} <--- do_fexit
ALLOW_ERROR_INJECTION(func_to_be_attached, ERRNO)
The fmod_ret program attached to this function can be defined as:
SEC("fmod_ret/func_to_be_attached")
int BPF_PROG(func_name, int a, int b, int ret)
{
// This will skip the original function logic.
return -1;
}
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test for two scenarios:
* When the fmod_ret program returns 0, the original function should
be called along with fentry and fexit programs.
* When the fmod_ret program returns a non-zero value, the original
function should not be called, no side effect should be observed and
fentry and fexit programs should be called.
The result from the kernel function call and whether a side-effect is
observed is returned via the retval attr of the BPF_PROG_TEST_RUN (bpf)
syscall.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200304191853.1529-8-kpsingh@chromium.org
|
|
The current fexit and fentry tests rely on a different program to
exercise the functions they attach to. Instead of doing this, implement
the test operations for tracing which will also be used for
BPF_MODIFY_RETURN in a subsequent patch.
Also, clean up the fexit test to use the generated skeleton.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200304191853.1529-7-kpsingh@chromium.org
|
|
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200304191853.1529-6-kpsingh@chromium.org
|
|
- Allow BPF_MODIFY_RETURN attachment only to functions that are:
* Whitelisted for error injection by checking
within_error_injection_list. Similar discussions happened for the
bpf_override_return helper.
* security hooks, this is expected to be cleaned up with the LSM
changes after the KRSI patches introduce the LSM_HOOK macro:
https://lore.kernel.org/bpf/20200220175250.10795-1-kpsingh@chromium.org/
- The attachment is currently limited to functions that return an int.
This can be extended later other types (e.g. PTR).
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200304191853.1529-5-kpsingh@chromium.org
|
|
When multiple programs are attached, each program receives the return
value from the previous program on the stack and the last program
provides the return value to the attached function.
The fmod_ret bpf programs are run after the fentry programs and before
the fexit programs. The original function is only called if all the
fmod_ret programs return 0 to avoid any unintended side-effects. The
success value, i.e. 0 is not currently configurable but can be made so
where user-space can specify it at load time.
For example:
int func_to_be_attached(int a, int b)
{ <--- do_fentry
do_fmod_ret:
<update ret by calling fmod_ret>
if (ret != 0)
goto do_fexit;
original_function:
<side_effects_happen_here>
} <--- do_fexit
The fmod_ret program attached to this function can be defined as:
SEC("fmod_ret/func_to_be_attached")
int BPF_PROG(func_name, int a, int b, int ret)
{
// This will skip the original function logic.
return 1;
}
The first fmod_ret program is passed 0 in its return argument.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200304191853.1529-4-kpsingh@chromium.org
|
|
* Split the invoke_bpf program to prepare for special handling of
fmod_ret programs introduced in a subsequent patch.
* Move the definition of emit_cond_near_jump and emit_nops as they are
needed for fmod_ret.
* Refactor branch target alignment into its own generic helper function
i.e. emit_align.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200304191853.1529-3-kpsingh@chromium.org
|
|
As we need to introduce a third type of attachment for trampolines, the
flattened signature of arch_prepare_bpf_trampoline gets even more
complicated.
Refactor the prog and count argument to arch_prepare_bpf_trampoline to
use bpf_tramp_progs to simplify the addition and accounting for new
attachment types.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200304191853.1529-2-kpsingh@chromium.org
|
|
This reverts commit 3df85a1ae51f6b256982fe9d17c2dc5bfb4cc402.
The reverted commit says "It's possible to release the node ID
immediately when fwnode_remove_software_node() is called, no need to
wait for software_node_release() with that." However, releasing the node
ID before waiting for software_node_release() to be called causes the
node ID to be released before the kobject and the underlying sysfs
entry; this means there is a period of time where a sysfs entry exists
that is associated with an unallocated node ID.
Once consequence of this is that there is a race condition where it is
possible to call fwnode_create_software_node() with no parent node
specified (NULL) and have it fail with -EEXIST because the node ID that
was assigned is still associated with a stale sysfs entry that hasn't
been cleaned up yet.
Although it is difficult to reproduce this race condition under normal
conditions, it can be deterministically reproduced with the following
minconfig on UML:
CONFIG_KUNIT_DRIVER_PE_TEST=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_KOBJECT_RELEASE=y
CONFIG_KUNIT=y
Running the tests with this configuration causes the following failure:
<snip>
kobject: 'node0' ((____ptrval____)): kobject_release, parent (____ptrval____) (delayed 400)
ok 1 - pe_test_uints
sysfs: cannot create duplicate filename '/kernel/software_nodes/node0'
CPU: 0 PID: 28 Comm: kunit_try_catch Not tainted 5.6.0-rc3-next-20200227 #14
<snip>
kobject_add_internal failed for node0 with -EEXIST, don't try to register things with the same name in the same directory.
kobject: 'node0' ((____ptrval____)): kobject_release, parent (____ptrval____) (delayed 100)
# pe_test_uint_arrays: ASSERTION FAILED at drivers/base/test/property-entry-test.c:123
Expected node is not error, but is: -17
not ok 2 - pe_test_uint_arrays
<snip>
Reported-by: Heidi Fahim <heidifahim@google.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: 5.3+ <stable@vger.kernel.org> # 5.3+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Leslie Monis says:
====================
pie: minor improvements
This patch series includes the following minor changes with
respect to the PIE/FQ-PIE qdiscs:
- Patch 1 removes some ambiguity by using the term "backlog"
instead of "qlen" when referring to the queue length
in bytes.
- Patch 2 removes redundant type casting on two expressions.
- Patch 3 removes the pie_vars->accu_prob_overflows variable
without affecting the precision in calculations and
makes the size of the pie_vars structure exactly 64
bytes.
- Patch 4 realigns a comment affected by a change in patch 3.
Changes from v1 to v2:
- Kept 8 as the argument to prandom_bytes() instead of changing it
to 7 as suggested by David Miller.
====================
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Realign a comment after the change introduced by the
previous patch.
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The variable pie_vars->accu_prob is used as an accumulator for
probability values. Since probabilty values are scaled using the
MAX_PROB macro denoting (2^64 - 1), pie_vars->accu_prob is
likely to overflow as it is of type u64.
The variable pie_vars->accu_prob_overflows counts the number of
times the variable pie_vars->accu_prob overflows.
The MAX_PROB macro needs to be equal to at least (2^39 - 1) in
order to do precise calculations without any underflow. Thus
MAX_PROB can be reduced to (2^56 - 1) without affecting the
precision in calculations drastically. Doing so will eliminate
the need for the variable pie_vars->accu_prob_overflows as the
variable pie_vars->accu_prob will never overflow.
Removing the variable pie_vars->accu_prob_overflows also reduces
the size of the structure pie_vars to exactly 64 bytes.
Signed-off-by: Mohit P. Tahiliani <tahiliani@nitk.edu.in>
Signed-off-by: Gautam Ramakrishnan <gautamramk@gmail.com>
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In function pie_calculate_probability(), the variables alpha and
beta are of type u64. The variables qdelay, qdelay_old and
params->target are of type psched_time_t (which is also u64).
The explicit type casting done when calculating the value for
the variable delta is redundant and not required.
Signed-off-by: Mohit P. Tahiliani <tahiliani@nitk.edu.in>
Signed-off-by: Gautam Ramakrishnan <gautamramk@gmail.com>
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove ambiguity by using the term backlog instead of qlen when
representing the queue length in bytes.
Signed-off-by: Mohit P. Tahiliani <tahiliani@nitk.edu.in>
Signed-off-by: Gautam Ramakrishnan <gautamramk@gmail.com>
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add detection of out-of-tree built vmlinux image for the purpose of
VMLINUX_BTF detection. According to Documentation/kbuild/kbuild.rst, O takes
precedence over KBUILD_OUTPUT.
Also ensure ~/path/to/build/dir also works by relying on wildcard's resolution
first, but then applying $(abspath) at the end to also handle
O=../../whatever cases.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200304184336.165766-1-andriin@fb.com
|
|
In preparation to add generic checks of compatible strings, drop
the compatible as '...' is not a valid compatible string.
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Paul Blakey says:
====================
Fixes for tc act_ct software offload of established flows (diff v4->v6)
v4 of the original patchset was accidentally merged while we moved ahead
with v6 review. This two patches are the diff between v4 that was merged and
v6 that was the final revision, which was acked by the community.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To make the filler functions more generic, use network
relative skb pulling.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When checking the protocol number tcf_ct_flow_table_lookup() handles
the flow as if it's always ipv4, while it can be ipv6.
Instead, refactor the code to fetch the tcp header, if available,
in the relevant family (ipv4/ipv6) filler function, and do the
check on the returned tcp header.
Fixes: 46475bb20f4b ("net/sched: act_ct: Software offload of established flows")
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix request-based DM's congestion_fn and actually wire it up to the
bdi.
- Extend dm-bio-record to track additional struct bio members needed by
DM integrity target.
- Fix DM core to properly advertise that a device is suspended during
unload (between the presuspend and postsuspend hooks). This change is
a prereq for related DM integrity and DM writecache fixes. It
elevates DM integrity's 'suspending' state tracking to DM core.
- Four stable fixes for DM integrity target.
- Fix crash in DM cache target due to incorrect work item cancelling.
- Fix DM thin metadata lockdep warning that was introduced during 5.6
merge window.
- Fix DM zoned target's chunk work refcounting that regressed during
recent conversion to refcount_t.
- Bump the minor version for DM core and all target versions that have
seen interface changes or important fixes during the 5.6 cycle.
* tag 'for-5.6/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: bump version of core and various targets
dm: fix congested_fn for request-based device
dm integrity: use dm_bio_record and dm_bio_restore
dm bio record: save/restore bi_end_io and bi_integrity
dm zoned: Fix reference counter initial value of chunk works
dm writecache: verify watermark during resume
dm: report suspended device during destroy
dm thin metadata: fix lockdep complaint
dm cache: fix a crash due to incorrect work item cancelling
dm integrity: fix invalid table returned due to argument count mismatch
dm integrity: fix a deadlock due to offloading to an incorrect workqueue
dm integrity: fix recalculation when moving from journal mode to bitmap mode
|
|
Compilation errors trigger if ARCH_SPARSEMEM_ENABLE is enabled for
a nommu kernel. Since the sparsemem model does not make sense anyway
for the nommu case, do not allow selecting this option to always use
the flatmem model.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
The dealloc_work_entries() function must update the work_free_list pointer
while freeing its entries, since potentially called again on same list. A
second iteration of the work list caused system crash. This happens, if
work allocation fails during cma_iw_listen() and free_cm_id() tries to
free the list again during cleanup.
Fixes: 922a8e9fb2e0 ("RDMA: iWARP Connection Manager.")
Link: https://lore.kernel.org/r/20200302181614.17042-1-bmt@zurich.ibm.com
Reported-by: syzbot+cb0c054eabfba4342146@syzkaller.appspotmail.com
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
A failing call to ib_device_set_netdev() during device creation caused
system crash due to xa_destroy of uninitialized xarray hit by device
deallocation. Fixed by moving xarray initialization before potential
device deallocation.
Fixes: bdcf26bf9b3a ("rdma/siw: network and RDMA core interface")
Link: https://lore.kernel.org/r/20200302155814.9896-1-bmt@zurich.ibm.com
Reported-by: syzbot+2e80962bedd9559fe0b3@syzkaller.appspotmail.com
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This fixes the kernel crash when a RDMA_NLDEV_CMD_STAT_SET command is
received, but the QP number parameter is not available.
iwpm_register_pid: Unable to send a nlmsg (client = 2)
infiniband syz1: RDMA CMA: cma_listen_on_dev, error -98
general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 9754 Comm: syz-executor069 Not tainted 5.6.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:nla_get_u32 include/net/netlink.h:1474 [inline]
RIP: 0010:nldev_stat_set_doit+0x63c/0xb70 drivers/infiniband/core/nldev.c:1760
Code: fc 01 0f 84 58 03 00 00 e8 41 83 bf fb 4c 8b a3 58 fd ff ff 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 04 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 6d
RSP: 0018:ffffc900068bf350 EFLAGS: 00010247
RAX: dffffc0000000000 RBX: ffffc900068bf728 RCX: ffffffff85b60470
RDX: 0000000000000000 RSI: ffffffff85b6047f RDI: 0000000000000004
RBP: ffffc900068bf750 R08: ffff88808c3ee140 R09: ffff8880a25e6010
R10: ffffed10144bcddc R11: ffff8880a25e6ee3 R12: 0000000000000000
R13: ffff88809acb0000 R14: ffff888092a42c80 R15: 000000009ef2e29a
FS: 0000000001ff0880(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f4733e34000 CR3: 00000000a9b27000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
rdma_nl_rcv_msg drivers/infiniband/core/netlink.c:195 [inline]
rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline]
rdma_nl_rcv+0x5d9/0x980 drivers/infiniband/core/netlink.c:259
netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1329
netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1918
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:672
____sys_sendmsg+0x753/0x880 net/socket.c:2343
___sys_sendmsg+0x100/0x170 net/socket.c:2397
__sys_sendmsg+0x105/0x1d0 net/socket.c:2430
__do_sys_sendmsg net/socket.c:2439 [inline]
__se_sys_sendmsg net/socket.c:2437 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2437
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4403d9
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffc0efbc5c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004403d9
RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000004
RBP: 00000000006ca018 R08: 0000000000000008 R09: 00000000004002c8
R10: 000000000000004a R11: 0000000000000246 R12: 0000000000401c60
R13: 0000000000401cf0 R14: 0000000000000000 R15: 0000000000000000
Fixes: b389327df905 ("RDMA/nldev: Allow counter manual mode configration through RDMA netlink")
Link: https://lore.kernel.org/r/20200227125111.99142-1-leon@kernel.org
Reported-by: syzbot+bd4af81bc51ee0283445@syzkaller.appspotmail.com
Signed-off-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Registration of a mmu_notifier requires the caller to hold a mmget() on
the mm as registration is not permitted to race with exit_mmap(). There is
a BUG_ON inside the mmu_notifier to guard against this.
Normally creating a umem is done against current which implicitly holds
the mmget(), however an implicit ODP child is created from a pagefault
work queue and is not guaranteed to have a mmget().
Call mmget() around this registration and abort faulting if the MM has
gone to exit_mmap().
Before the patch below the notifier was registered when the implicit ODP
parent was created, so there was no chance to register a notifier outside
of current.
Fixes: c571feca2dc9 ("RDMA/odp: use mmu_notifier_get/put for 'struct ib_ucontext_per_mm'")
Link: https://lore.kernel.org/r/20200227114118.94736-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Fix NULL pointer dereference in the error flow of ib_create_qp_user
when accessing to uninitialized list pointers - rdma_mrs and sig_mrs.
The following crash from syzkaller revealed it.
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN PTI
CPU: 1 PID: 23167 Comm: syz-executor.1 Not tainted 5.5.0-rc5 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
RIP: 0010:ib_mr_pool_destroy+0x81/0x1f0
Code: 00 00 fc ff df 49 c1 ec 03 4d 01 fc e8 a8 ea 72 fe 41 80 3c 24 00
0f 85 62 01 00 00 48 8b 13 48 89 d6 4c 8d 6a c8 48 c1 ee 03 <42> 80 3c
3e 00 0f 85 34 01 00 00 48 8d 7a 08 4c 8b 02 48 89 fe 48
RSP: 0018:ffffc9000951f8b0 EFLAGS: 00010046
RAX: 0000000000040000 RBX: ffff88810f268038 RCX: ffffffff82c41628
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffc9000951f850
RBP: ffff88810f268020 R08: 0000000000000004 R09: fffff520012a3f0a
R10: 0000000000000001 R11: fffff520012a3f0a R12: ffffed1021e4d007
R13: ffffffffffffffc8 R14: 0000000000000246 R15: dffffc0000000000
FS: 00007f54bc788700(0000) GS:ffff88811b100000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000116920002 CR4: 0000000000360ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
rdma_rw_cleanup_mrs+0x15/0x30
ib_destroy_qp_user+0x674/0x7d0
ib_create_qp_user+0xb01/0x11c0
create_qp+0x1517/0x2130
ib_uverbs_create_qp+0x13e/0x190
ib_uverbs_write+0xaa5/0xdf0
__vfs_write+0x7c/0x100
vfs_write+0x168/0x4a0
ksys_write+0xc8/0x200
do_syscall_64+0x9c/0x390
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x465b49
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89
f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f54bc787c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000465b49
RDX: 0000000000000040 RSI: 0000000020000540 RDI: 0000000000000003
RBP: 00007f54bc787c70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f54bc7886bc
R13: 00000000004ca2ec R14: 000000000070ded0 R15: 0000000000000005
Fixes: a060b5629ab0 ("IB/core: generic RDMA READ/WRITE API")
Link: https://lore.kernel.org/r/20200227112708.93023-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
When CONFIG_DEBUG_INFO is enabled, the two kallsyms linking steps spend
time collecting and writing the dwarf sections to the temporary output
files. kallsyms does not need this information, and leaving it off
halves their linking time. This is especially noticeable without
CONFIG_DEBUG_INFO_REDUCED. The BTF linking stage, however, does still
need those details.
Refactor the BTF and kallsyms generation stages slightly for more
regularized temporary names. Skip debug during kallsyms links.
Additionally move "info BTF" to the correct place since commit
8959e39272d6 ("kbuild: Parameterize kallsyms generation and correct
reporting"), which added "info LD ..." to vmlinux_link calls.
For a full debug info build with BTF, my link time goes from 1m06s to
0m54s, saving about 12 seconds, or 18%.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/202003031814.4AEA3351@keescook
|
|
Following race may occur because of the call_srcu and the placement of
the synchronize_srcu vs the xa_erase.
CPU0 CPU1
mlx5_ib_free_implicit_mr: destroy_unused_implicit_child_mr:
xa_erase(odp_mkeys)
synchronize_srcu()
xa_lock(implicit_children)
if (still in xarray)
atomic_inc()
call_srcu()
xa_unlock(implicit_children)
xa_erase(implicit_children):
xa_lock(implicit_children)
__xa_erase()
xa_unlock(implicit_children)
flush_workqueue()
[..]
free_implicit_child_mr_rcu:
(via call_srcu)
queue_work()
WARN_ON(atomic_read())
[..]
free_implicit_child_mr_work:
(via wq)
free_implicit_child_mr()
mlx5_mr_cache_invalidate()
mlx5_ib_update_xlt() <-- UMR QP fail
atomic_dec()
The wait_event() solves the race because it blocks until
free_implicit_child_mr_work() completes.
Fixes: 5256edcb98a1 ("RDMA/mlx5: Rework implicit ODP destroy")
Link: https://lore.kernel.org/r/20200227113918.94432-1-leon@kernel.org
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Older (and maybe current) versions of systemd set release_agent to "" when
shutting down, but do not set notify_on_release to 0.
Since 64e90a8acb85 ("Introduce STATIC_USERMODEHELPER to mediate
call_usermodehelper()"), we filter out such calls when the user mode helper
path is "". However, when used in conjunction with an actual (i.e. non "")
STATIC_USERMODEHELPER, the path is never "", so the real usermode helper
will be called with argv[0] == "".
Let's avoid this by not invoking the release_agent when it is "".
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes
ARM: socfpga_defconfig: add back DEBUGFS
- Add back DEBUG_FS for socfpga_defconfig
* tag 'socfpga_defconfig_fix_for_v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: socfpga_defconfig: Add back DEBUG_FS
Link: https://lore.kernel.org/r/20200304101917.1243-1-dinguyen@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Similar to the commit d7495343228f ("cgroup: fix incorrect
WARN_ON_ONCE() in cgroup_setup_root()"), cgroup_id(root_cgrp) does not
equal to 1 on 32bit ino archs which triggers all sorts of issues with
psi_show() on s390x. For example,
BUG: KASAN: slab-out-of-bounds in collect_percpu_times+0x2d0/
Read of size 4 at addr 000000001e0ce000 by task read_all/3667
collect_percpu_times+0x2d0/0x798
psi_show+0x7c/0x2a8
seq_read+0x2ac/0x830
vfs_read+0x92/0x150
ksys_read+0xe2/0x188
system_call+0xd8/0x2b4
Fix it by using cgroup_ino().
Fixes: 743210386c03 ("cgroup: use cgrp->kn->id as the cgroup ID")
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v5.5
|
|
This patch replaces devm_gpiod_get() with devm_gpiod_get_optional() to get
bt_en and replaces devm_clk_get() with devm_clk_get_optional() to get
susclk. It also uses NULL check to determine whether the resource is
available or not.
Fixes: 8a208b24d770 ("Bluetooth: hci_qca: Make bt_en and susclk not mandatory for QCA Rome")
Signed-off-by: Rocky Liao <rjliao@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Andrii Nakryiko says:
====================
Convert BPF-related UAPI constants, currently defined as #define macro, into
anonymous enums. This has no difference in terms of usage of such constants in
C code (they are still could be used in all the compile-time contexts that
`#define`s can), but they are recorded as part of DWARF type info, and
subsequently get recorded as part of kernel's BTF type info. This allows those
constants to be emitted as part of vmlinux.h auto-generated header file and be
used from BPF programs. Which is especially convenient for all kinds of BPF
helper flags and makes CO-RE BPF programs nicer to write.
libbpf's btf_dump logic currently assumes enum values are signed 32-bit
values, but that doesn't match a typical case, so switch it to emit unsigned
values. Once BTF encoding of BTF_KIND_ENUM is extended to capture signedness
properly, this will be made more flexible.
As an immediate validation of the approach, runqslower's copy of
BPF_F_CURRENT_CPU #define is dropped in favor of its enum variant from
vmlinux.h.
v2->v3:
- convert only constants usable from BPF programs (BPF helper flags, map
create flags, etc) (Alexei);
v1->v2:
- fix up btf_dump test to use max 32-bit unsigned value instead of negative one.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
With BPF_F_CURRENT_CPU being an enum, it is now captured in vmlinux.h and is
readily usable by runqslower. So drop local copy/pasted definition in favor of
the one coming from vmlinux.h.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200303003233.3496043-4-andriin@fb.com
|
|
Currently, BTF_KIND_ENUM type doesn't record whether enum values should be
interpreted as signed or unsigned. In Linux, most enums are unsigned, though,
so interpreting them as unsigned matches real world better.
Change btf_dump test case to test maximum 32-bit value, instead of negative
value.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200303003233.3496043-3-andriin@fb.com
|
|
Switch BPF UAPI constants, previously defined as #define macro, to anonymous
enum values. This preserves constants values and behavior in expressions, but
has added advantaged of being captured as part of DWARF and, subsequently, BTF
type info. Which, in turn, greatly improves usefulness of generated vmlinux.h
for BPF applications, as it will not require BPF users to copy/paste various
flags and constants, which are frequently used with BPF helpers. Only those
constants that are used/useful from BPF program side are converted.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200303003233.3496043-2-andriin@fb.com
|
|
The way cookie_init_hw_msi_region() allocates the iommu_dma_msi_page
structures doesn't match the way iommu_put_dma_cookie() frees them.
The former performs a single allocation of all the required structures,
while the latter tries to free them one at a time. It doesn't quite
work for the main use case (the GICv3 ITS where the range is 64kB)
when the base granule size is 4kB.
This leads to a nice slab corruption on teardown, which is easily
observable by simply creating a VF on a SRIOV-capable device, and
tearing it down immediately (no need to even make use of it).
Fortunately, this only affects systems where the ITS isn't translated
by the SMMU, which are both rare and non-standard.
Fix it by allocating iommu_dma_msi_page structures one at a time.
Fixes: 7c1b058c8b5a3 ("iommu/dma: Handle IOMMU API reserved regions")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
While converting to the json-schema, let's also take the opportunity to
further specify/clarify some more details about the DT binding.
For example, let's define the label where to put the states nodes, set a
pattern for nodename of the state nodes and finally add an example.
Fixes: a3f048b5424e ("dt: psci: Update DT bindings to support hierarchical PSCI states")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[robh: drop type refs from standard unit properties]
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Fixes: a3f048b5424e ("dt: psci: Update DT bindings to support hierarchical PSCI states")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The arm,idle-state DT bindings recently got converted to the json-schema,
but some links are still pointing to the old, non-existing, txt file. Let's
update the links to fix this.
Fixes: baac82fe06db ("dt-bindings: arm: Convert arm,idle-state binding to DT schema")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Enable MSI interrupt for GL9750/GL9755. Some platforms
do not support PCI INTx and devices can not work without
interrupt. Like messages below:
[ 4.487132] sdhci-pci 0000:01:00.0: SDHCI controller found [17a0:9755] (rev 0)
[ 4.487198] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.PBR2._PRT.APS2], AE_NOT_FOUND (20190816/psargs-330)
[ 4.487397] ACPI Error: Aborting method \_SB.PCI0.PBR2._PRT due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 4.487707] pcieport 0000:00:01.3: can't derive routing for PCI INT A
[ 4.487709] sdhci-pci 0000:01:00.0: PCI INT A: no GSI
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Tested-by: Raul E Rangel <rrangel@chromium.org>
Fixes: e51df6ce668a ("mmc: host: sdhci-pci: Add Genesys Logic GL975x support")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200219092900.9151-1-benchuanggli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Some error paths leave the bus id allocated. As a result the IDR
allocation will fail after a deferred probe. Fix by freeing the bus id
always on error.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Message-Id: <20200304111740.27915-1-aaro.koskinen@nokia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There maybe an overshoot, when disabling, then re-enabling vrefbuf
too quickly. VREFBUF is used by ADC/DAC on some boards. When re-enabling
too quickly, an overshoot on the reference voltage make the conversions
inaccurate for a short period of time.
- Don't put the VREFBUF in HiZ when disabling, to force an active
discharge.
- Enforce a 1ms OFF/ON delay
Fixes: 0cdbf481e927 ("regulator: Add support for stm32-vrefbuf")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Message-Id: <1583312132-20932-1-git-send-email-fabrice.gasnier@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This reverts commit ff57c6513820efe945b61863cf4a51b79f18b592.
With the commit ff57c6513820 ("drm: kirin: Fix for hikey620
display offset problem") we added support for handling LDI
overflows by resetting the hardware.
However, its been observed that when we do hit the LDI overflow
condition, the irq seems to be screaming, and we do nothing but
stream:
[drm:ade_irq_handler [kirin_drm]] *ERROR* LDI underflow!
over and over to the screen
I've tried a few appraoches to avoid this, but none has yet
been successful and the cure here is worse then the original
disease, so revert this for now.
Cc: Xinliang Liu <xinliang.liu@linaro.org>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Chen Feng <puck.chen@hisilicon.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Fixes: ff57c6513820 ("drm: kirin: Fix for hikey620 display offset problem")
Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Xinliang Liu <xinliang.liu@linaro.org>
Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303163228.52741-1-john.stultz@linaro.org
|
|
The commit e894efef9ac7 ("ASoC: core: add support to card rebind")
allows to rebind the sound card after a rebind of one of its component.
With this commit, the sound card is actually rebound,
but may be no more functional. The following problems have been seen
with STM32 SAI driver.
1) DMA channel is not requested:
With the sound card rebind the simplified call sequence is:
stm32_sai_sub_probe
snd_soc_register_component
snd_soc_try_rebind_card
snd_soc_instantiate_card
devm_snd_dmaengine_pcm_register
The problem occurs because the pcm must be registered,
before snd_soc_instantiate_card() is called.
Modify SAI driver, to change the call sequence as follows:
stm32_sai_sub_probe
devm_snd_dmaengine_pcm_register
snd_soc_register_component
snd_soc_try_rebind_card
2) DMA channel is not released:
dma_release_channel() is not called when
devm_dmaengine_pcm_release() is executed.
This occurs because SND_DMAENGINE_PCM_DRV_NAME component,
has already been released through devm_component_release().
devm_dmaengine_pcm_release() should be called before
devm_component_release() to avoid this problem.
Call snd_dmaengine_pcm_unregister() and snd_soc_unregister_component()
explicitly from SAI driver, to have the right sequence.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Message-Id: <20200304102406.8093-1-olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit 107db7ec7838 ("docs: networking: convert 6lowpan.txt to ReST")
renamed 6lowpan.txt to 6lowpan.rst for the ReST conversion.
Since then, ./scripts/get_maintainer.pl --self-test complains:
warning: no file matches F: Documentation/networking/6lowpan.txt
Adjust 6LOWPAN GENERIC (BTLE/IEEE 802.15.4) entry in MAINTAINERS.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
