summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-09-05iommu/fsl: Fix warning resulting from adding PCI device twiceVarun Sethi
iommu_group_get_for_dev determines the iommu group for the PCI device and adds the device to the group. In the PAMU driver we were again adding the device to the same group without checking if the device already had an iommu group. This resulted in the following warning. sysfs: cannot create duplicate filename '/devices/ffe200000.pcie/pci0000:00/0000:00:00.0/iommu_group' ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:31 Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.17.0-rc3-00002-g7505cea-dirty #126 task: c0000001fe0a0000 ti: c0000001fe044000 task.ti: c0000001fe044000 NIP: c00000000018879c LR: c000000000188798 CTR: c00000000001ea50 REGS: c0000001fe047040 TRAP: 0700 Not tainted (3.17.0-rc3-00002-g7505cea-dirty) MSR: 0000000080029000 <CE,EE,ME> CR: 24ad8e22 XER: 20000000 SOFTE: 1 GPR00: c000000000188798 c0000001fe0472c0 c0000000009a52e0 0000000000000065 GPR04: 0000000000000001 0000000000000000 3a30303a00000000 0000000027000000 GPR08: 2f696f6d00000000 c0000000008d3830 c0000000009b3938 c0000000009bb3d0 GPR12: 0000000028ad8e24 c00000000fff4000 c00000000000205c 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 c0000000008a4c70 GPR24: c0000000007e9010 c0000001fe0140a8 ffffffffffffffef 0000000000000001 GPR28: c0000001fe22ebb8 c0000000007e9010 c00000000090bf10 c0000001fe220000 NIP [c00000000018879c] .sysfs_warn_dup+0x74/0xa4 LR [c000000000188798] .sysfs_warn_dup+0x70/0xa4 Call Trace: [c0000001fe0472c0] [c000000000188798] .sysfs_warn_dup+0x70/0xa4 (unreliable) [c0000001fe047350] [c000000000188d34] .sysfs_do_create_link_sd.clone.2+0x168/0x174 [c0000001fe047400] [c0000000004b3cf8] .iommu_group_add_device+0x78/0x244 [c0000001fe0474b0] [c0000000004b6964] .fsl_pamu_add_device+0x88/0x1a8 [c0000001fe047570] [c0000000004b3960] .iommu_bus_notifier+0xdc/0x15c [c0000001fe047600] [c000000000059848] .notifier_call_chain+0x8c/0xe8 [c0000001fe0476a0] [c000000000059d04] .__blocking_notifier_call_chain+0x58/0x84 [c0000001fe047750] [c00000000036619c] .device_add+0x464/0x5c8 [c0000001fe047820] [c000000000300ebc] .pci_device_add+0x14c/0x17c [c0000001fe0478c0] [c000000000300fbc] .pci_scan_single_device+0xd0/0xf4 [c0000001fe047970] [c00000000030104c] .pci_scan_slot+0x6c/0x18c [c0000001fe047a10] [c00000000030226c] .pci_scan_child_bus+0x40/0x114 [c0000001fe047ac0] [c000000000021974] .pcibios_scan_phb+0x240/0x2c8 [c0000001fe047b70] [c00000000085a970] .pcibios_init+0x64/0xc8 [c0000001fe047c00] [c000000000001884] .do_one_initcall+0xbc/0x224 [c0000001fe047d00] [c000000000852d50] .kernel_init_freeable+0x14c/0x21c [c0000001fe047db0] [c000000000002078] .kernel_init+0x1c/0xfa4 [c0000001fe047e30] [c000000000000884] .ret_from_kernel_thread+0x58/0xd4 Instruction dump: 7c7f1b79 4182001c 7fe4fb78 7f83e378 38a01000 4bffc905 60000000 7c641b78 e87e8008 7fa5eb78 48482ff5 60000000 <0fe00000> 7fe3fb78 4bf7bd39 60000000 Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Cc: stable@vger.kernel.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-09-05Merge branches 'pm-sleep', 'powercap', 'pm-domains' and 'pm-cpufreq'Rafael J. Wysocki
* pm-sleep: PM / sleep: Fix test_suspend= command line option * powercap: powercap / RAPL: change domain detection message powercap / RAPL: add support for CPU model 0x3f * pm-domains: PM / domains: Make generic_pm_domain.name const * pm-cpufreq: cpufreq: intel_pstate: Remove unneeded variable
2014-09-05Merge branches 'acpi-video' and 'acpi-ec'Rafael J. Wysocki
* acpi-video: ACPI / video: Disable native_backlight on HP ENVY 15 Notebook PC ACPI / video: Add a disable_native_backlight quirk ACPI / video: Fix use_native_backlight selection logic * acpi-ec: ACPI / EC: Add msi quirk for Clevo W350etq
2014-09-05Merge branches 'acpica', 'acpi-processor' and 'acpi-scan'Rafael J. Wysocki
* acpica: ACPICA: ACPI 5.1: Add support for runtime validation of _DSD package. * acpi-processor: ACPI / cpuidle: fix deadlock between cpuidle_lock and cpu_hotplug.lock * acpi-scan: ACPI / scan: not cache _SUN value in struct acpi_device_pnp
2014-09-05Merge remote-tracking branches 'regulator/fix/doc' and ↵Mark Brown
'regulator/fix/tps65090' into regulator-linus
2014-09-05crypto: drbg - remove check for uninitialized DRBG handleStephan Mueller
The drbg_healthcheck() contained a test to call the DRBG with an uninitialized DRBG cipher handle. As this is an inappropriate use of the kernel crypto API to try to generate random numbers before initialization, checks verifying for an initialized DRBG have been removed in previous patches. Now, the drbg_healthcheck test must also be removed. Changes V2: Added patch marker to email subject line. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-09-05crypto: drbg - backport "fix maximum value checks on 32 bit systems"Herbert Xu
This is a backport of commit b9347aff91ce4789619168539f08202d8d6a1177. This backport is needed as without it the code will crash on 32-bit systems. The maximum values for additional input string or generated blocks is larger than 1<<32. To ensure a sensible value on 32 bit systems, return SIZE_MAX on 32 bit systems. This value is lower than the maximum allowed values defined in SP800-90A. The standard allow lower maximum values, but not larger values. SIZE_MAX - 1 is used for drbg_max_addtl to allow drbg_healthcheck_sanity to check the enforcement of the variable without wrapping. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-09-05Merge branch 'linux-3.17' of ↵Dave Airlie
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes single fix for nouveau. * 'linux-3.17' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau/core: don't leak oclass type bits to user
2014-09-04usb: usbip: fix usbip.h path in userspace toolPiotr Król
Fixes: 588b48caf65c ("usbip: move usbip userspace code out of staging") which introduced build failure by not changing uapi/usbip.h include path according to new location. Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-05drm/nouveau/core: don't leak oclass type bits to userBen Skeggs
Fixes not being able to init fence subsystem when multiple boards are present. Reported-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-04Merge git://git.kvack.org/~bcrl/aio-fixesLinus Torvalds
Pull aio bugfixes from Ben LaHaise: "Two small fixes" * git://git.kvack.org/~bcrl/aio-fixes: aio: block exit_aio() until all context requests are completed aio: add missing smp_rmb() in read_events_ring
2014-09-04spi/rockchip: Mark DMA as optionalDoug Anderson
The Rockchip SPI controller works fine without DMA (aside from a few warnings). The DMA property even implies this, saying: DMA request names should include "tx" and "rx" if present. Officially mark the properties as optional. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-04spi/rockchip: Don't warn if SPI is busy but disabledDoug Anderson
The reference manual from Rockchip claims this about the BSF (SPI Busy Flag): * 0 - SPI is idle or disabled * 1 - SPI is actively transferring data The above doesn't quite appear to be true. Specifically I found the busy bit set when SPI was disabled. Let's change the WARN_ON() so we only check the busy bit if the controller was enabled. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-04spi/rockchip: Fix the wait_for_idle() timeoutDoug Anderson
The wait_for_idle() could get unlucky and timeout too quickly. Specifically, the old calculation was effectively: timeout = jiffies + 1; if (jiffies >= timeout) print warning; From the above it should be obvious that if jiffies ticks in just the wrong place then we'll have an effective timeout of 0. Fix this by effectively changing the above ">=" to a ">". That gives us an extra jiffy to finish. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-04spi: sirf: add fifo reset/start for cmd transferQipan Li
for command mode spi transfer, HW spec requires to do fifo reset work to clear FIFO status. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-04aio: block exit_aio() until all context requests are completedGu Zheng
It seems that exit_aio() also needs to wait for all iocbs to complete (like io_destroy), but we missed the wait step in current implemention, so fix it in the same way as we did in io_destroy. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org> Cc: stable@vger.kernel.org
2014-09-04nohz: Restore NMI safe local irq work for local nohz kickFrederic Weisbecker
The local nohz kick is currently used by perf which needs it to be NMI-safe. Recent commit though (7d1311b93e58ed55f3a31cc8f94c4b8fe988a2b9) changed its implementation to fire the local kick using the remote kick API. It was convenient to make the code more generic but the remote kick isn't NMI-safe. As a result: WARNING: CPU: 3 PID: 18062 at kernel/irq_work.c:72 irq_work_queue_on+0x11e/0x140() CPU: 3 PID: 18062 Comm: trinity-subchil Not tainted 3.16.0+ #34 0000000000000009 00000000903774d1 ffff880244e06c00 ffffffff9a7f1e37 0000000000000000 ffff880244e06c38 ffffffff9a0791dd ffff880244fce180 0000000000000003 ffff880244e06d58 ffff880244e06ef8 0000000000000000 Call Trace: <NMI> [<ffffffff9a7f1e37>] dump_stack+0x4e/0x7a [<ffffffff9a0791dd>] warn_slowpath_common+0x7d/0xa0 [<ffffffff9a07930a>] warn_slowpath_null+0x1a/0x20 [<ffffffff9a17ca1e>] irq_work_queue_on+0x11e/0x140 [<ffffffff9a10a2c7>] tick_nohz_full_kick_cpu+0x57/0x90 [<ffffffff9a186cd5>] __perf_event_overflow+0x275/0x350 [<ffffffff9a184f80>] ? perf_event_task_disable+0xa0/0xa0 [<ffffffff9a01a4cf>] ? x86_perf_event_set_period+0xbf/0x150 [<ffffffff9a187934>] perf_event_overflow+0x14/0x20 [<ffffffff9a020386>] intel_pmu_handle_irq+0x206/0x410 [<ffffffff9a0b54d3>] ? arch_vtime_task_switch+0x63/0x130 [<ffffffff9a01937b>] perf_event_nmi_handler+0x2b/0x50 [<ffffffff9a007b72>] nmi_handle+0xd2/0x390 [<ffffffff9a007aa5>] ? nmi_handle+0x5/0x390 [<ffffffff9a0d131b>] ? lock_release+0xab/0x330 [<ffffffff9a008062>] default_do_nmi+0x72/0x1c0 [<ffffffff9a0c925f>] ? cpuacct_account_field+0xcf/0x200 [<ffffffff9a008268>] do_nmi+0xb8/0x100 Lets fix this by restoring the use of local irq work for the nohz local kick. Reported-by: Catalin Iacob <iacobcatalin@gmail.com> Reported-and-tested-by: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2014-09-04Merge branch 'pci/host-imx6' into for-linusBjorn Helgaas
* pci/host-imx6: PCI: imx6: Put LTSSM in "Detect" state before disabling it MAINTAINERS: Add Lucas Stach as co-maintainer for i.MX6 PCI driver
2014-09-04Merge tag 'davinci-fixes-for-v3.17-rc4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes This patch fixes setup of second EDMA channel controller on DA850. * tag 'davinci-fixes-for-v3.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: edma: Fix configuration parsing for SoCs with multiple eDMA3 CC
2014-09-04ARM: dts: dra7-evm: Add vtt regulator supportLokesh Vutla
DRA7 evm REV G and later boards uses a vtt regulator for DDR3 termination and this is controlled by gpio7_11. This gpio is configured in boot loader. gpio7_11, which is only available only on Pad A22, in previous boards, is connected only to an unused pad on expansion connector EXP_P3 and is safe to be muxed as GPIO on all DRA7-evm versions (without a need to spin off another dts file). Since gpio7_11 is used to control VTT and should not be reset or kept in idle state during boot up else VTT will be disconnected and DDR gets corrupted. So, as part of this change, mark gpio7 as no-reset and no-idle on init. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-04ARM: dts: dra7-evm: Fix spi1 mux documentationNishanth Menon
While auditing the various pin ctrl configurations using the following command: grep PIN_ arch/arm/boot/dts/dra7-evm.dts|(while read line; do v=`echo "$line" | sed -e "s/\s\s*/|/g" | cut -d '|' -f1 | cut -d 'x' -f2|tr [a-z] [A-Z]`; HEX=`echo "obase=16;ibase=16;4A003400+$v"| bc`; echo "$HEX ===> $line"; done) against DRA75x/74x NDA TRM revision S(SPRUHI2S August 2014), documentation errors were found for spi1 pinctrl. Fix the same. Fixes: 6e58b8f1daaf1af ("ARM: dts: DRA7: Add the dts files for dra7 SoC and dra7-evm board") Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-04ARM: dts: am43x-epos-evm: Disable QSPI to prevent conflict with GPMC-NANDRoger Quadros
Both QSPI and GPMC-NAND share the same Pin (A8) from the SoC for Chip Select functionality. So both can't be enabled simultaneously. Disable QSPI node to prevent the pin conflict as well as be similar to 3.12 release. CC: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Pekon Gupta <pekon@pek-sem.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-04ARM: OMAP2+: gpmc: Don't complain if wait pin is used without r/w monitoringRoger Quadros
For NAND read & write wait pin monitoring must be kept disabled as the wait pin is only used to indicate NAND device ready status and not to extend each read/write cycle. So don't print a warning if wait pin is specified while read/write monitoring is not in the device tree. Sanity check wait pin number irrespective if read/write monitoring is set or not. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Pekon Gupta <pekon@pek-sem.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-04ARM: dts: am43xx-epos-evm: Don't use read/write wait monitoringRoger Quadros
NAND uses wait pin only to indicate device readiness after a block/page operation. It is not use to extend individual read/write cycle and so read/write wait pin monitoring must be disabled for NAND. Add gpmc wait pin information as the NAND uses wait pin 0 for device ready indication. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Pekon Gupta <pekon@pek-sem.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-04ARM: dts: am437x-gp-evm: Don't use read/write wait monitoringRoger Quadros
NAND uses wait pin only to indicate device readiness after a block/page operation. It is not use to extend individual read/write cycle and so read/write wait pin monitoring must be disabled for NAND. This patch also gets rid of the below warning when NAND is accessed for the first time. omap_l3_noc 44000000.ocp: L3 application error: target 13 mod:1 (unclearable) Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Pekon Gupta <pekon@pek-sem.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-04ARM: dts: am437x-gp-evm: Use BCH16 ECC scheme instead of BCH8Roger Quadros
am437x-gp-evm uses a NAND chip with page size 4096 bytes and spare area of 225 bytes per page. For such a setup it is preferrable to use BCH16 ECC scheme over BCH8. This also makes it compatible with ROM code ECC scheme so we can boot with NAND after flashing from kernel. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Pekon Gupta <pekon@pek-sem.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-04ARM: dts: am43x-epos-evm: Use BCH16 ECC scheme instead of BCH8Roger Quadros
am43x-epos-evm uses a NAND chip with page size 4096 bytes and spare area of 225 bytes per page. For such a setup it is preferrable to use BCH16 ECC scheme over BCH8. This also makes it compatible with ROM code ECC scheme so we can boot with NAND after flashing from kernel. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Pekon Gupta <pekon@pek-sem.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-04udf: saner calling conventions for udf_new_inode()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-04udf: fix the udf_iget() vs. udf_new_inode() racesAl Viro
Currently udf_iget() (triggered by NFS) can race with udf_new_inode() leading to two inode structures with the same inode number: nfsd: iget_locked() creates inode nfsd: try to read from disk, block on that. udf_new_inode(): allocate inode with that inumber udf_new_inode(): insert it into icache, set it up and dirty udf_write_inode(): write inode into buffer cache nfsd: get CPU again, look into buffer cache, see nice and sane on-disk inode, set the in-core inode from it Fix the problem by putting inode into icache in locked state (I_NEW set) and unlocking it only after it's fully set up. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-04udf: merge the pieces inserting a new non-directory object into directoryAl Viro
boilerplate code in udf_{create,mknod,symlink} taken to new helper symlink case converted to unique id calculated by udf_new_inode() - no point finding a new one. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-04udf: Set i_generation fieldJan Kara
Currently UDF doesn't initialize i_generation in any way and thus NFS can easily get reallocated inodes from stale file handles. Luckily UDF already has a unique object identifier associated with each inode - i_unique. Use that for initialization of i_generation. Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-04udf: Properly detect stale inodesJan Kara
NFS can easily ask for inodes that are already deleted. Currently UDF happily returns such inodes which is a bug. Return -ESTALE if udf_read_inode() is asked to read deleted inode. Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-04udf: Make udf_read_inode() and udf_iget() return errorJan Kara
Currently __udf_read_inode() wasn't returning anything and we found out whether we succeeded reading inode by checking whether inode is bad or not. udf_iget() returned NULL on failure and inode pointer otherwise. Make these two functions properly propagate errors up the call stack and use the return value in callers. Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-04spi: sirf: enable RX_IO_DMA_INT interruptQipan Li
in spi interrupt handler, we need check RX_IO_DMA status to ensure rx fifo have received the specify count data. if not set, the while statement in spi isr function will keep loop, at last, make the kernel hang. [The code is actually there in the interrupt handler but apparently it needs the interrupt unmasking so the handler sees the status -- broonie] Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-09-04Revert "i2c: rcar: remove spinlock"Sergei Shtylyov
This reverts commit 150b8be3cda54412ad7b54f5392b513b25c0aaa7. The I2C core's per-adapter locks can't protect from IRQs, so the driver still needs a spinlock to protect the register accesses. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: stable@vger.kernel.org # 3.16+ Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-09-04Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2014-09-04Merge tag 'mac80211-for-john-2014-08-29' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg <johannes@sipsolutions.net> says: "Here are a few fixes for mac80211. One has been discussed for a while and adds a terminating NUL-byte to the alpha2 sent to userspace, which shouldn't be necessary but since many places treat it as a string we couldn't move to just sending two bytes. In addition to that, we have two VLAN fixes from Felix, a mesh fix, a fix for the recently introduced RX aggregation offload, a revert for a broken patch (that luckily didn't really cause any harm) and a small fix for alignment in debugfs." Signed-off-by: John W. Linville <linville@redhat.com>
2014-09-04Merge tag 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon bugfix from Guenter Roeck: "Fix a bug in the ds1621 driver" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ds1621) Update zbits after conversion rate change
2014-09-04Merge tag 'platform-drivers-x86-v3.17-1' of ↵Linus Torvalds
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform drivers fixes from Darren Hart: "This is my first pull request since taking on maintenance for the platform-drivers-x86 tree from Matthew Garrett. These have passed my build testing and been run through Fengguang's LKP tests. Due to timing this round, these have not spent any time in linux-next. I have asked Stephen to include my for-next branch in linux-next going forward, once he's back from vacation. Details from tag: - toshiba_acpi: re-enable hotkeys and cleanups - ideapad-laptop: revert touchpad disable, and cleanup static/const usage - MAINTAINERS: update platform-drivers-x86 maintainer and tree" * tag 'platform-drivers-x86-v3.17-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: toshiba_acpi: fix and cleanup toshiba_kbd_bl_mode_store() platform/x86: toshiba: re-enable acpi hotkeys after suspend to disk ideapad-laptop: Constify DMI table for real! Revert "ideapad-laptop: Disable touchpad interface on Yoga models" MAINTAINERS: Update platform-drivers-x86 maintainer and tree
2014-09-05cgroup: check cgroup liveliness before unbreaking kernfsLi Zefan
When cgroup_kn_lock_live() is called through some kernfs operation and another thread is calling cgroup_rmdir(), we'll trigger the warning in cgroup_get(). ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1228 at kernel/cgroup.c:1034 cgroup_get+0x89/0xa0() ... Call Trace: [<c16ee73d>] dump_stack+0x41/0x52 [<c10468ef>] warn_slowpath_common+0x7f/0xa0 [<c104692d>] warn_slowpath_null+0x1d/0x20 [<c10bb999>] cgroup_get+0x89/0xa0 [<c10bbe58>] cgroup_kn_lock_live+0x28/0x70 [<c10be3c1>] __cgroup_procs_write.isra.26+0x51/0x230 [<c10be5b2>] cgroup_tasks_write+0x12/0x20 [<c10bb7b0>] cgroup_file_write+0x40/0x130 [<c11aee71>] kernfs_fop_write+0xd1/0x160 [<c1148e58>] vfs_write+0x98/0x1e0 [<c114934d>] SyS_write+0x4d/0xa0 [<c16f656b>] sysenter_do_call+0x12/0x12 ---[ end trace 6f2e0c38c2108a74 ]--- Fix this by calling css_tryget() instead of cgroup_get(). v2: - move cgroup_tryget() right below cgroup_get() definition. (Tejun) Cc: <stable@vger.kernel.org> # 3.15+ Reported-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Zefan Li <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-09-05cgroup: delay the clearing of cgrp->kn->privLi Zefan
Run these two scripts concurrently: for ((; ;)) { mkdir /cgroup/sub rmdir /cgroup/sub } for ((; ;)) { echo $$ > /cgroup/sub/cgroup.procs echo $$ > /cgroup/cgroup.procs } A kernel bug will be triggered: BUG: unable to handle kernel NULL pointer dereference at 00000038 IP: [<c10bbd69>] cgroup_put+0x9/0x80 ... Call Trace: [<c10bbe19>] cgroup_kn_unlock+0x39/0x50 [<c10bbe91>] cgroup_kn_lock_live+0x61/0x70 [<c10be3c1>] __cgroup_procs_write.isra.26+0x51/0x230 [<c10be5b2>] cgroup_tasks_write+0x12/0x20 [<c10bb7b0>] cgroup_file_write+0x40/0x130 [<c11aee71>] kernfs_fop_write+0xd1/0x160 [<c1148e58>] vfs_write+0x98/0x1e0 [<c114934d>] SyS_write+0x4d/0xa0 [<c16f656b>] sysenter_do_call+0x12/0x12 We clear cgrp->kn->priv in the end of cgroup_rmdir(), but another concurrent thread can access kn->priv after the clearing. We should move the clearing to css_release_work_fn(). At that time no one is holding reference to the cgroup and no one can gain a new reference to access it. v2: - move RCU_INIT_POINTER() into the else block. (Tejun) - remove the cgroup_parent() check. (Tejun) - update the comment in css_tryget_online_from_dir(). Cc: <stable@vger.kernel.org> # 3.15+ Reported-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Zefan Li <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-09-04Merge tag 'sound-3.17-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This time it contains a bunch of small ASoC fixes that slipped from in previous updates, in addition to the usual HD-audio fixes and the regression fixes for FireWire updates in 3.17. All commits are reasonably small fixes" * tag 'sound-3.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix COEF setups for ALC1150 codec ASoC: simple-card: Fix bug of wrong decrement DT node's refcount ALSA: hda - Fix digital mic on Acer Aspire 3830TG ASoC: omap-twl4030: Fix typo in 2nd dai link's platform_name ALSA: firewire-lib/dice: add arrangements of PCM pointer and interrupts for Dice quirk ALSA: dice: fix wrong channel mappping at higher sampling rate ASoC: cs4265: Fix setting of functional mode and clock divider ASoC: cs4265: Fix clock rates in clock map table ASoC: rt5677: correct mismatch widget name ASoC: rt5640: Do not allow regmap to use bulk read-write operations ASoC: tegra: Fix typo in include guard ASoC: da732x: Fix typo in include guard ASoC: core: fix .info for SND_SOC_BYTES_TLV ASoC: rcar: Use && instead of & for boolean expressions ASoC: Use dev_set_name() instead of init_name ASoC: axi: Fix ADI AXI SPDIF specification
2014-09-04[media] af9035: new IDs: add support for PCTV 78e and PCTV 79eMalcolm Priestley
add the following IDs USB_PID_PCTV_78E (0x025a) for PCTV 78e USB_PID_PCTV_79E (0x0262) for PCTV 79e For these it9135 devices. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Cc: Antti Palosaari <crope@iki.fi> Cc: <stable@vger.kernel.org> # v3.14+ Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-04[media] af9033: feed clock to RF tunerAntti Palosaari
IT9135 RF tuner clock is coming from demodulator. We need enable it early in demod init, before any tuner I/O. Currently it is enabled by tuner driver itself, but it is too late and performance will be reduced as some registers are not updated correctly. Clock is disabled automatically when demod is put onto sleep. Cc: <stable@vger.kernel.org> # v3.15+ Cc: Bimow Chen <Bimow.Chen@ite.com.tw> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-04[media] it913x: init tuner on attachBimow Chen
That register is needed to program very first in order to operate correctly. [crope@iki.fi: returned sequence back, removed sleep, moved reg write earlier to prevent populating tuner ops in case of failure] Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by: Bimow Chen <Bimow.Chen@ite.com.tw> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-04[media] af9033: update IT9135 tuner inittabsBimow Chen
Update IT9135 BX tuner config 60 and 61 inittabs. [crope@iki.fi: removed two reg writes from driver init itself] Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by: Bimow Chen <Bimow.Chen@ite.com.tw> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-04[media] Kconfig: do not select SPI bus on sub-driver auto-selectAntti Palosaari
We should not select SPI bus when sub-driver auto-select is selected. That option is meant for auto-selecting all possible ancillary drivers used for selected board driver. Ancillary drivers should define needed dependencies itself. I2C and I2C_MUX are still selected here for a reason described on commit 347f7a3763601d7b466898d1f10080b7083ac4a3 Reverts commit e4462ffc1602d9df21c00a0381dca9080474e27a Reported-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-04Merge tag 'usb-serial-3.17-rc4' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v3.17-rc4 These updates add back some PIDs that were lost in a recent revert and add a couple of new ones. Included is also an update to how the sierra driver binds its interfaces in order to avoid binding CDC interfaces. Signed-off-by: Johan Hovold <johan@kernel.org>
2014-09-04PCI: imx6: Put LTSSM in "Detect" state before disabling itLucas Stach
This fixes a boot hang observed when the bootloader already enabled the PCIe link for its own use. The fundamental problem is that Freescale forgot to wire up the core reset, so software doesn't have a sane way to get the core into a defined state. According to the DW PCIe core reference manual, configuration of the core may only happen when the LTSSM is disabled, so this is one of the first things we need to do. Apparently this isn't safe to do when the LTSSM is in any state other than "detect" as we observe an instant machine hang when trying to do so while the link is already up. As a workaround, force LTSSM into detect state right before hitting the disable switch. There is still a race window because the LTSSM may transition out of "detect" before we can disable it, but it's the best we can do for now. [bhelgaas: mention race window] Link: http://lkml.kernel.org/r/1406830565-23450-3-git-send-email-l.stach@pengutronix.de Reported-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Tim Harvey <tharvey@gateworks.com>
2014-09-04MAINTAINERS: Add Lucas Stach as co-maintainer for i.MX6 PCI driverLucas Stach
Also drop Shawn Guo per his request. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Shawn Guo <shawn.guo@freescale.com> Acked-by: Richard Zhu <r65037@freescale.com> Acked-by: Jingoo Han <jg1.han@samsung.com>
generated by cgit (git 2.34.1) at 2025-09-28 09:13:54 +0000